Merge branch 'next' into for-linus

Prepare input updates for 5.3 merge window.

Merge tag 'v5.1' into next

Sync up with mainline to bring in the latest APIs.

Merge tag 'drm-intel-next-2019-04-04' into gvt-next

Merge back drm-intel-next for engine name definition refinement
and 54939ea0bd85 ("drm/i915: Switch to use HWS indices rather than addresses")
tha

Merge tag 'drm-intel-next-2019-04-04' into gvt-next

Merge back drm-intel-next for engine name definition refinement
and 54939ea0bd85 ("drm/i915: Switch to use HWS indices rather than addresses")
that would need gvt fixes to depend on.

Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>

show more ...

Merge tag 'v5.0-rc5' of https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux into fbdev-for-next

Linux 5.0-rc5

Sync with upstream (which now contains fbdev-v5.0-rc3 changes) to
prepare a

Merge tag 'v5.0-rc5' of https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux into fbdev-for-next

Linux 5.0-rc5

Sync with upstream (which now contains fbdev-v5.0-rc3 changes) to
prepare a base for fbdev-v5.1 changes.

show more ...

Merge tag 'v4.20' into for-linus

Sync with mainline to get linux/overflow.h among other things.

Merge tag 'v4.20' into next

Merge with mainline to bring in the new APIs.

Merge drm/drm-next into drm-misc-next

drm-next has been forwarded to 5.0-rc1, and we need it to apply the damage
helper for dirtyfb series from Noralf Trønnes.

Signed-off-by: Maxime Ripard <maxime.

Merge drm/drm-next into drm-misc-next

drm-next has been forwarded to 5.0-rc1, and we need it to apply the damage
helper for dirtyfb series from Noralf Trønnes.

Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>

show more ...

Merge tag 'v5.0-rc1' into next-general

Linux 5.0-rc1

Sync to pick up LSM stacking work (which is based on -rc1).

Merge drm/drm-next into drm-intel-next-queued

Generally catch up with 5.0-rc1, and specifically get the changes:

96d4f267e40f ("Remove 'type' argument from access_ok() function")
0b2c8f8b6b0c ("i91

Merge drm/drm-next into drm-intel-next-queued

Generally catch up with 5.0-rc1, and specifically get the changes:

96d4f267e40f ("Remove 'type' argument from access_ok() function")
0b2c8f8b6b0c ("i915: fix missing user_access_end() in page fault exception case")
594cc251fdd0 ("make 'user_access_begin()' do 'access_ok()'")

Signed-off-by: Jani Nikula <jani.nikula@intel.com>

show more ...

Merge branch 'master' into fixes

We have a fix to apply on top of commit 96d4f267e40f ("Remove 'type'
argument from access_ok() function"), so merge master to get it.

Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

Pull networking updates from David Miller:

1) New ipset extensions for matching on destination MAC addresses, from
Stefano Br

Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

Pull networking updates from David Miller:

1) New ipset extensions for matching on destination MAC addresses, from
Stefano Brivio.

2) Add ipv4 ttl and tos, plus ipv6 flow label and hop limit offloads to
nfp driver. From Stefano Brivio.

3) Implement GRO for plain UDP sockets, from Paolo Abeni.

4) Lots of work from Michał Mirosław to eliminate the VLAN_TAG_PRESENT
bit so that we could support the entire vlan_tci value.

5) Rework the IPSEC policy lookups to better optimize more usecases,
from Florian Westphal.

6) Infrastructure changes eliminating direct manipulation of SKB lists
wherever possible, and to always use the appropriate SKB list
helpers. This work is still ongoing...

7) Lots of PHY driver and state machine improvements and
simplifications, from Heiner Kallweit.

8) Various TSO deferral refinements, from Eric Dumazet.

9) Add ntuple filter support to aquantia driver, from Dmitry Bogdanov.

10) Batch dropping of XDP packets in tuntap, from Jason Wang.

11) Lots of cleanups and improvements to the r8169 driver from Heiner
Kallweit, including support for ->xmit_more. This driver has been
getting some much needed love since he started working on it.

12) Lots of new forwarding selftests from Petr Machata.

13) Enable VXLAN learning in mlxsw driver, from Ido Schimmel.

14) Packed ring support for virtio, from Tiwei Bie.

15) Add new Aquantia AQtion USB driver, from Dmitry Bezrukov.

16) Add XDP support to dpaa2-eth driver, from Ioana Ciocoi Radulescu.

17) Implement coalescing on TCP backlog queue, from Eric Dumazet.

18) Implement carrier change in tun driver, from Nicolas Dichtel.

19) Support msg_zerocopy in UDP, from Willem de Bruijn.

20) Significantly improve garbage collection of neighbor objects when
the table has many PERMANENT entries, from David Ahern.

21) Remove egdev usage from nfp and mlx5, and remove the facility
completely from the tree as it no longer has any users. From Oz
Shlomo and others.

22) Add a NETDEV_PRE_CHANGEADDR so that drivers can veto the change and
therefore abort the operation before the commit phase (which is the
NETDEV_CHANGEADDR event). From Petr Machata.

23) Add indirect call wrappers to avoid retpoline overhead, and use them
in the GRO code paths. From Paolo Abeni.

24) Add support for netlink FDB get operations, from Roopa Prabhu.

25) Support bloom filter in mlxsw driver, from Nir Dotan.

26) Add SKB extension infrastructure. This consolidates the handling of
the auxiliary SKB data used by IPSEC and bridge netfilter, and is
designed to support the needs to MPTCP which could be integrated in
the future.

27) Lots of XDP TX optimizations in mlx5 from Tariq Toukan.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1845 commits)
net: dccp: fix kernel crash on module load
drivers/net: appletalk/cops: remove redundant if statement and mask
bnx2x: Fix NULL pointer dereference in bnx2x_del_all_vlans() on some hw
net/net_namespace: Check the return value of register_pernet_subsys()
net/netlink_compat: Fix a missing check of nla_parse_nested
ieee802154: lowpan_header_create check must check daddr
net/mlx4_core: drop useless LIST_HEAD
mlxsw: spectrum: drop useless LIST_HEAD
net/mlx5e: drop useless LIST_HEAD
iptunnel: Set tun_flags in the iptunnel_metadata_reply from src
net/mlx5e: fix semicolon.cocci warnings
staging: octeon: fix build failure with XFRM enabled
net: Revert recent Spectre-v1 patches.
can: af_can: Fix Spectre v1 vulnerability
packet: validate address length if non-zero
nfc: af_nfc: Fix Spectre v1 vulnerability
phonet: af_phonet: Fix Spectre v1 vulnerability
net: core: Fix Spectre v1 vulnerability
net: minor cleanup in skb_ext_add()
net: drop the unused helper skb_ext_get()
...

show more ...

Merge tag 'v4.20-rc7' of https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux into fbdev-for-next

Linux 4.20-rc7

Sync with upstream (which now contains fbdev-v4.20 changes) to
prepare a b

Merge tag 'v4.20-rc7' of https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux into fbdev-for-next

Linux 4.20-rc7

Sync with upstream (which now contains fbdev-v4.20 changes) to
prepare a base for fbdev-v4.21 changes.

show more ...

Merge drm/drm-next into drm-intel-next-queued

Pull in v4.20-rc3 via drm-next.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>

Merge branch 'ncsi-Allow-enabling-multiple-packages-and-channels'

Samuel Mendoza-Jonas says:

====================
net/ncsi: Allow enabling multiple packages & channels

This series extends the NCSI

Merge branch 'ncsi-Allow-enabling-multiple-packages-and-channels'

Samuel Mendoza-Jonas says:

====================
net/ncsi: Allow enabling multiple packages & channels

This series extends the NCSI driver to configure multiple packages
and/or channels simultaneously. Since the RFC series this includes a few
extra changes to fix areas in the driver that either made this harder or
were roadblocks due to deviations from the NCSI specification.

Patches 1 & 2 fix two issues where the driver made assumptions about the
capabilities of the NCSI topology.
Patches 3 & 4 change some internal semantics slightly to make multi-mode
easier.
Patch 5 introduces a cleaner way of reconfiguring the NCSI configuration
and keeping track of channel states.
Patch 6 implements the main multi-package/multi-channel configuration,
configured via the Netlink interface.

Readers who have an interesting NCSI setup - especially multi-package
with HWA - please test! I think I've covered all permutations but I
don't have infinite hardware to test on.

Changes in v2:
- Updated use of the channel lock in ncsi_reset_dev(), making the
channel invisible and leaving the monitor check to
ncsi_stop_channel_monitor().
- Fixed ncsi_channel_is_tx() to consider the state of channels in other
packages.
Changes in v3:
- Fixed bisectability bug in patch 1
- Consider channels on all packages in a few places when multi-package
is enabled.
- Avoid doubling up reset operations, and check the current driver state
before reset to let any running operations complete.
- Reorganise the LSC handler slightly to avoid enabling Tx twice.
Changes in v4:
- Fix failover in the single-channel case
- Better handle ncsi_reset_dev() entry during a current config/suspend
operation.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

net/ncsi: Configure multi-package, multi-channel modes with failover

This patch extends the ncsi-netlink interface with two new commands and
three new attributes to configure multiple packages and/o

net/ncsi: Configure multi-package, multi-channel modes with failover

This patch extends the ncsi-netlink interface with two new commands and
three new attributes to configure multiple packages and/or channels at
once, and configure specific failover modes.

NCSI_CMD_SET_PACKAGE mask and NCSI_CMD_SET_CHANNEL_MASK set a whitelist
of packages or channels allowed to be configured with the
NCSI_ATTR_PACKAGE_MASK and NCSI_ATTR_CHANNEL_MASK attributes
respectively. If one of these whitelists is set only packages or
channels matching the whitelist are considered for the channel queue in
ncsi_choose_active_channel().

These commands may also use the NCSI_ATTR_MULTI_FLAG to signal that
multiple packages or channels may be configured simultaneously. NCSI
hardware arbitration (HWA) must be available in order to enable
multi-package mode. Multi-channel mode is always available.

If the NCSI_ATTR_CHANNEL_ID attribute is present in the
NCSI_CMD_SET_CHANNEL_MASK command the it sets the preferred channel as
with the NCSI_CMD_SET_INTERFACE command. The combination of preferred
channel and channel whitelist defines a primary channel and the allowed
failover channels.
If the NCSI_ATTR_MULTI_FLAG attribute is also present then the preferred
channel is configured for Tx/Rx and the other channels are enabled only
for Rx.

Signed-off-by: Samuel Mendoza-Jonas <sam@mendozajonas.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

Merge remote-tracking branch 'drm/drm-next' into drm-misc-next

drm-next is forwarded to v4.20-rc1, and we need this to make
a patch series apply.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst

Merge remote-tracking branch 'drm/drm-next' into drm-misc-next

drm-next is forwarded to v4.20-rc1, and we need this to make
a patch series apply.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>

show more ...

Merge tag 'v4.20-rc2' into next-general

Sync to Linux 4.20-rc2 for downstream developers.

Merge tag 'v4.20-rc1' into omap-for-v4.21/dt-ti-sysc

Linux 4.20-rc1

Merge branch 'fixes-dts' into omap-for-v4.20/fixes

Merge branch 'linus' into perf/urgent, to pick up fixes

Signed-off-by: Ingo Molnar <mingo@kernel.org>

Merge branch 'linus' into x86/urgent, to refresh the tree

Signed-off-by: Ingo Molnar <mingo@kernel.org>

Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

Pull networking updates from David Miller:

1) Add VF IPSEC offload support in ixgbe, from Shannon Nelson.

2) Add zero-copy AF_X

Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

Pull networking updates from David Miller:

1) Add VF IPSEC offload support in ixgbe, from Shannon Nelson.

2) Add zero-copy AF_XDP support to i40e, from Björn Töpel.

3) All in-tree drivers are converted to {g,s}et_link_ksettings() so we
can get rid of the {g,s}et_settings ethtool callbacks, from Michal
Kubecek.

4) Add software timestamping to veth driver, from Michael Walle.

5) More work to make packet classifiers and actions lockless, from Vlad
Buslov.

6) Support sticky FDB entries in bridge, from Nikolay Aleksandrov.

7) Add ipv6 version of IP_MULTICAST_ALL sockopt, from Andre Naujoks.

8) Support batching of XDP buffers in vhost_net, from Jason Wang.

9) Add flow dissector BPF hook, from Petar Penkov.

10) i40e vf --> generic iavf conversion, from Jesse Brandeburg.

11) Add NLA_REJECT netlink attribute policy type, to signal when users
provide attributes in situations which don't make sense. From
Johannes Berg.

12) Switch TCP and fair-queue scheduler over to earliest departure time
model. From Eric Dumazet.

13) Improve guest receive performance by doing rx busy polling in tx
path of vhost networking driver, from Tonghao Zhang.

14) Add per-cgroup local storage to bpf

15) Add reference tracking to BPF, from Joe Stringer. The verifier can
now make sure that references taken to objects are properly released
by the program.

16) Support in-place encryption in TLS, from Vakul Garg.

17) Add new taprio packet scheduler, from Vinicius Costa Gomes.

18) Lots of selftests additions, too numerous to mention one by one here
but all of which are very much appreciated.

19) Support offloading of eBPF programs containing BPF to BPF calls in
nfp driver, frm Quentin Monnet.

20) Move dpaa2_ptp driver out of staging, from Yangbo Lu.

21) Lots of u32 classifier cleanups and simplifications, from Al Viro.

22) Add new strict versions of netlink message parsers, and enable them
for some situations. From David Ahern.

23) Evict neighbour entries on carrier down, also from David Ahern.

24) Support BPF sk_msg verdict programs with kTLS, from Daniel Borkmann
and John Fastabend.

25) Add support for filtering route dumps, from David Ahern.

26) New igc Intel driver for 2.5G parts, from Sasha Neftin et al.

27) Allow vxlan enslavement to bridges in mlxsw driver, from Ido
Schimmel.

28) Add queue and stack map types to eBPF, from Mauricio Vasquez B.

29) Add back byte-queue-limit support to r8169, with all the bug fixes
in other areas of the driver it works now! From Florian Westphal and
Heiner Kallweit.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (2147 commits)
tcp: add tcp_reset_xmit_timer() helper
qed: Fix static checker warning
Revert "be2net: remove desc field from be_eq_obj"
Revert "net: simplify sock_poll_wait"
net: socionext: Reset tx queue in ndo_stop
net: socionext: Add dummy PHY register read in phy_write()
net: socionext: Stop PHY before resetting netsec
net: stmmac: Set OWN bit for jumbo frames
arm64: dts: stratix10: Support Ethernet Jumbo frame
tls: Add maintainers
net: ethernet: ti: cpsw: unsync mcast entries while switch promisc mode
octeontx2-af: Support for NIXLF's UCAST/PROMISC/ALLMULTI modes
octeontx2-af: Support for setting MAC address
octeontx2-af: Support for changing RSS algorithm
octeontx2-af: NIX Rx flowkey configuration for RSS
octeontx2-af: Install ucast and bcast pkt forwarding rules
octeontx2-af: Add LMAC channel info to NIXLF_ALLOC response
octeontx2-af: NPC MCAM and LDATA extract minimal configuration
octeontx2-af: Enable packet length and csum validation
octeontx2-af: Support for VTAG strip and capture
...

show more ...

net/ncsi: Extend NC-SI Netlink interface to allow user space to send NC-SI command

The new command (NCSI_CMD_SEND_CMD) is added to allow user space application
to send NC-SI command to the network c

net/ncsi: Extend NC-SI Netlink interface to allow user space to send NC-SI command

The new command (NCSI_CMD_SEND_CMD) is added to allow user space application
to send NC-SI command to the network card.
Also, add a new attribute (NCSI_ATTR_DATA) for transferring request and response.

The work flow is as below.

Request:
User space application
-> Netlink interface (msg)
-> new Netlink handler - ncsi_send_cmd_nl()
-> ncsi_xmit_cmd()

Response:
Response received - ncsi_rcv_rsp()
-> internal response handler - ncsi_rsp_handler_xxx()
-> ncsi_rsp_handler_netlink()
-> ncsi_send_netlink_rsp ()
-> Netlink interface (msg)
-> user space application

Command timeout - ncsi_request_timeout()
-> ncsi_send_netlink_timeout ()
-> Netlink interface (msg with zero data length)
-> user space application

Error:
Error detected
-> ncsi_send_netlink_err ()
-> Netlink interface (err msg)
-> user space application

Signed-off-by: Justin Lee <justin.lee1@dell.com>
Reviewed-by: Samuel Mendoza-Jonas <sam@mendozajonas.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

Merge branch 'next' into for-linus

Prepare input updates for 4.18 merge window.

Merge branches 'clk-warn', 'clk-core', 'clk-spear' and 'clk-qcom-msm8998' into clk-next

* clk-warn:
clk: Print the clock name and warning cause

* clk-core:
clk: Remove clk_init_cb typedef

* cl

Merge branches 'clk-warn', 'clk-core', 'clk-spear' and 'clk-qcom-msm8998' into clk-next

* clk-warn:
clk: Print the clock name and warning cause

* clk-core:
clk: Remove clk_init_cb typedef

* clk-spear:
clk: spear: fix WDT clock definition on SPEAr600

* clk-qcom-msm8998:
clk: qcom: Add MSM8998 Global Clock Control (GCC) driver

show more ...