Merge tag 'v5.18'

Linux 5.18

Merge tag 'v5.17-rc4' into for-linus

Merge with mainline to get the Intel ASoC generic helpers header and
other changes.

Merge tag 'v5.16' into next

Sync up with mainline to bring in the latest API changes.

Merge branch 'for-next' into for-linus

Pull 5.17 materials.

Signed-off-by: Takashi Iwai <tiwai@suse.de>

Merge drm/drm-next into drm-misc-next-fixes

Backmerging to bring drm-misc-next-fixes up to the latest state for
the current release cycle.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge branch 'reset/of-get-optional-exclusive' of git://git.pengutronix.de/pza/linux into timers/drivers/next

"Add optional variant of of_reset_control_get_exclusive(). If the
requested reset is not

Merge branch 'reset/of-get-optional-exclusive' of git://git.pengutronix.de/pza/linux into timers/drivers/next

"Add optional variant of of_reset_control_get_exclusive(). If the
requested reset is not specified in the device tree, this function
returns NULL instead of an error."

This dependency is needed for the Generic Timer Module (a.k.a OSTM)
support for RZ/G2L.

Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>

show more ...

Merge drm/drm-next into drm-intel-next

Sync up with drm-next to get v5.16-rc2.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>

Merge drm/drm-next into drm-intel-gt-next

Thomas needs the dma_resv_for_each_fence API for i915/ttm async migration
work.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>

Merge drm/drm-next into drm-misc-next

Backmerging from drm/drm-next for v5.16-rc1.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Merge drm/drm-fixes into drm-misc-fixes

We need -rc1 to address a breakage in drm/scheduler affecting panfrost.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>

Merge remote-tracking branch 'torvalds/master' into perf/core

To pick up some tools/perf/ patches that went via tip/perf/core, such
as:

tools/perf: Add mem_hops field in perf_mem_data_src structu

Merge remote-tracking branch 'torvalds/master' into perf/core

To pick up some tools/perf/ patches that went via tip/perf/core, such
as:

tools/perf: Add mem_hops field in perf_mem_data_src structure

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

show more ...

Merge tag 'net-next-for-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Jakub Kicinski:
"Core:

- Remove socket skb caches

- Add a SO_RESE

Merge tag 'net-next-for-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Jakub Kicinski:
"Core:

- Remove socket skb caches

- Add a SO_RESERVE_MEM socket op to forward allocate buffer space and
avoid memory accounting overhead on each message sent

- Introduce managed neighbor entries - added by control plane and
resolved by the kernel for use in acceleration paths (BPF / XDP
right now, HW offload users will benefit as well)

- Make neighbor eviction on link down controllable by userspace to
work around WiFi networks with bad roaming implementations

- vrf: Rework interaction with netfilter/conntrack

- fq_codel: implement L4S style ce_threshold_ect1 marking

- sch: Eliminate unnecessary RCU waits in mini_qdisc_pair_swap()

BPF:

- Add support for new btf kind BTF_KIND_TAG, arbitrary type tagging
as implemented in LLVM14

- Introduce bpf_get_branch_snapshot() to capture Last Branch Records

- Implement variadic trace_printk helper

- Add a new Bloomfilter map type

- Track <8-byte scalar spill and refill

- Access hw timestamp through BPF's __sk_buff

- Disallow unprivileged BPF by default

- Document BPF licensing

Netfilter:

- Introduce egress hook for looking at raw outgoing packets

- Allow matching on and modifying inner headers / payload data

- Add NFT_META_IFTYPE to match on the interface type either from
ingress or egress

Protocols:

- Multi-Path TCP:
- increase default max additional subflows to 2
- rework forward memory allocation
- add getsockopts: MPTCP_INFO, MPTCP_TCPINFO, MPTCP_SUBFLOW_ADDRS

- MCTP flow support allowing lower layer drivers to configure msg
muxing as needed

- Automatic Multicast Tunneling (AMT) driver based on RFC7450

- HSR support the redbox supervision frames (IEC-62439-3:2018)

- Support for the ip6ip6 encapsulation of IOAM

- Netlink interface for CAN-FD's Transmitter Delay Compensation

- Support SMC-Rv2 eliminating the current same-subnet restriction, by
exploiting the UDP encapsulation feature of RoCE adapters

- TLS: add SM4 GCM/CCM crypto support

- Bluetooth: initial support for link quality and audio/codec offload

Driver APIs:

- Add a batched interface for RX buffer allocation in AF_XDP buffer
pool

- ethtool: Add ability to control transceiver modules' power mode

- phy: Introduce supported interfaces bitmap to express MAC
capabilities and simplify PHY code

- Drop rtnl_lock from DSA .port_fdb_{add,del} callbacks

New drivers:

- WiFi driver for Realtek 8852AE 802.11ax devices (rtw89)

- Ethernet driver for ASIX AX88796C SPI device (x88796c)

Drivers:

- Broadcom PHYs
- support 72165, 7712 16nm PHYs
- support IDDQ-SR for additional power savings

- PHY support for QCA8081, QCA9561 PHYs

- NXP DPAA2: support for IRQ coalescing

- NXP Ethernet (enetc): support for software TCP segmentation

- Renesas Ethernet (ravb) - support DMAC and EMAC blocks of
Gigabit-capable IP found on RZ/G2L SoC

- Intel 100G Ethernet
- support for eswitch offload of TC/OvS flow API, including
offload of GRE, VxLAN, Geneve tunneling
- support application device queues - ability to assign Rx and Tx
queues to application threads
- PTP and PPS (pulse-per-second) extensions

- Broadcom Ethernet (bnxt)
- devlink health reporting and device reload extensions

- Mellanox Ethernet (mlx5)
- offload macvlan interfaces
- support HW offload of TC rules involving OVS internal ports
- support HW-GRO and header/data split
- support application device queues

- Marvell OcteonTx2:
- add XDP support for PF
- add PTP support for VF

- Qualcomm Ethernet switch (qca8k): support for QCA8328

- Realtek Ethernet DSA switch (rtl8366rb)
- support bridge offload
- support STP, fast aging, disabling address learning
- support for Realtek RTL8365MB-VC, a 4+1 port 10M/100M/1GE switch

- Mellanox Ethernet/IB switch (mlxsw)
- multi-level qdisc hierarchy offload (e.g. RED, prio and shaping)
- offload root TBF qdisc as port shaper
- support multiple routing interface MAC address prefixes
- support for IP-in-IP with IPv6 underlay

- MediaTek WiFi (mt76)
- mt7921 - ASPM, 6GHz, SDIO and testmode support
- mt7915 - LED and TWT support

- Qualcomm WiFi (ath11k)
- include channel rx and tx time in survey dump statistics
- support for 80P80 and 160 MHz bandwidths
- support channel 2 in 6 GHz band
- spectral scan support for QCN9074
- support for rx decapsulation offload (data frames in 802.3
format)

- Qualcomm phone SoC WiFi (wcn36xx)
- enable Idle Mode Power Save (IMPS) to reduce power consumption
during idle

- Bluetooth driver support for MediaTek MT7922 and MT7921

- Enable support for AOSP Bluetooth extension in Qualcomm WCN399x and
Realtek 8822C/8852A

- Microsoft vNIC driver (mana)
- support hibernation and kexec

- Google vNIC driver (gve)
- support for jumbo frames
- implement Rx page reuse

Refactor:

- Make all writes to netdev->dev_addr go thru helpers, so that we can
add this address to the address rbtree and handle the updates

- Various TCP cleanups and optimizations including improvements to
CPU cache use

- Simplify the gnet_stats, Qdisc stats' handling and remove
qdisc->running sequence counter

- Driver changes and API updates to address devlink locking
deficiencies"

* tag 'net-next-for-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2122 commits)
Revert "net: avoid double accounting for pure zerocopy skbs"
selftests: net: add arp_ndisc_evict_nocarrier
net: ndisc: introduce ndisc_evict_nocarrier sysctl parameter
net: arp: introduce arp_evict_nocarrier sysctl parameter
libbpf: Deprecate AF_XDP support
kbuild: Unify options for BTF generation for vmlinux and modules
selftests/bpf: Add a testcase for 64-bit bounds propagation issue.
bpf: Fix propagation of signed bounds from 64-bit min/max into 32-bit.
bpf: Fix propagation of bounds from 64-bit min/max into 32-bit and var_off.
net: vmxnet3: remove multiple false checks in vmxnet3_ethtool.c
net: avoid double accounting for pure zerocopy skbs
tcp: rename sk_wmem_free_skb
netdevsim: fix uninit value in nsim_drv_configure_vfs()
selftests/bpf: Fix also no-alu32 strobemeta selftest
bpf: Add missing map_delete_elem method to bloom filter map
selftests/bpf: Add bloom map success test for userspace calls
bpf: Add alignment padding for "map_extra" + consolidate holes
bpf: Bloom filter map naming fixups
selftests/bpf: Add test cases for struct_ops prog
bpf: Add dummy BPF STRUCT_OPS for test purpose
...

show more ...

Merge branch 'amt-driver'

Taehee Yoo says:

====================
amt: add initial driver for Automatic Multicast Tunneling (AMT)

This is an implementation of AMT(Automatic Multicast Tunneling), RFC

Merge branch 'amt-driver'

Taehee Yoo says:

====================
amt: add initial driver for Automatic Multicast Tunneling (AMT)

This is an implementation of AMT(Automatic Multicast Tunneling), RFC 7450.
https://datatracker.ietf.org/doc/html/rfc7450

This implementation supports IGMPv2, IGMPv3, MLDv1, MLDv2, and IPv4
underlay.

Summary of RFC 7450
The purpose of this protocol is to provide multicast tunneling.
The main use-case of this protocol is to provide delivery multicast
traffic from a multicast-enabled network to sites that lack multicast
connectivity to the source network.
There are two roles in AMT protocol, Gateway, and Relay.
The main purpose of Gateway mode is to forward multicast listening
information(IGMP, MLD) to the source.
The main purpose of Relay mode is to forward multicast data to listeners.
These multicast traffics(IGMP, MLD, multicast data packets) are tunneled.

Listeners are located behind Gateway endpoint.
But gateway itself can be a listener too.
Senders are located behind Relay endpoint.

___________ _________ _______ ________
| | | | | | | |
| Listeners <-----> Gateway <-----> Relay <-----> Source |
|___________| |_________| |_______| |________|
IGMP/MLD---------(encap)----------->
<-------------(decap)--------(encap)------Multicast Data

Usage of AMT interface
1. Create gateway interface
ip link add amtg type amt mode gateway local 10.0.0.1 discovery 10.0.0.2 \
dev gw1_rt gateway_port 2268 relay_port 2268

2. Create Relay interface
ip link add amtr type amt mode relay local 10.0.0.2 dev relay_rt \
relay_port 2268 max_tunnels 4

v1 -> v2:
- Eliminate sparse warnings.
- Use bool type instead of __be16 for identifying v4/v6 protocol.

v2 -> v3:
- Fix compile warning due to unsed variable.
- Add missing spinlock comment.
- Update help message of amt in Kconfig.

v3 -> v4:
- Split patch.
- Use CHECKSUM_NONE instead of CHECKSUM_UNNECESSARY.
- Fix compile error.

v4 -> v5:
- Remove unnecessary rcu_read_lock().
- Remove unnecessary amt_change_mtu().
- Change netlink error message.
- Add validation for IFLA_AMT_LOCAL_IP and IFLA_AMT_DISCOVERY_IP.
- Add comments in amt.h.
- Add missing dev_put() in error path of amt_newlink().
- Fix typo.
- Add BUILD_BUG_ON() in amt_smb_cb().
- Use macro instead of magic values.
- Use kzalloc() instead of kmalloc().
- Add selftest script.

v5 -> v6:
- Reset remote_ip in amt_dev_stop().

v6 -> v7:
- Fix compile error.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...

amt: add control plane of amt interface

It adds definitions and control plane code for AMT.
this is very similar to udp tunneling interfaces such as gtp, vxlan, etc.
In the next patch, data plane co

amt: add control plane of amt interface

It adds definitions and control plane code for AMT.
this is very similar to udp tunneling interfaces such as gtp, vxlan, etc.
In the next patch, data plane code will be added.

Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

show more ...