1#!/bin/bash 2# SPDX-License-Identifier: GPL-2.0 3 4# This test uses standard topology for testing gretap. See 5# mirror_gre_topo_lib.sh for more details. 6# 7# Test how mirrors to gretap and ip6gretap react to changes to relevant 8# configuration. 9 10ALL_TESTS=" 11 test_ttl 12 test_tun_up 13 test_egress_up 14 test_remote_ip 15 test_tun_del 16 test_route_del 17" 18 19NUM_NETIFS=6 20source lib.sh 21source mirror_lib.sh 22source mirror_gre_lib.sh 23source mirror_gre_topo_lib.sh 24 25setup_prepare() 26{ 27 h1=${NETIFS[p1]} 28 swp1=${NETIFS[p2]} 29 30 swp2=${NETIFS[p3]} 31 h2=${NETIFS[p4]} 32 33 swp3=${NETIFS[p5]} 34 h3=${NETIFS[p6]} 35 36 vrf_prepare 37 mirror_gre_topo_create 38 39 # This test downs $swp3, which deletes the configured IPv6 address 40 # unless this sysctl is set. 41 sysctl_set net.ipv6.conf.$swp3.keep_addr_on_down 1 42 43 ip address add dev $swp3 192.0.2.129/28 44 ip address add dev $h3 192.0.2.130/28 45 46 ip address add dev $swp3 2001:db8:2::1/64 47 ip address add dev $h3 2001:db8:2::2/64 48} 49 50cleanup() 51{ 52 pre_cleanup 53 54 ip address del dev $h3 2001:db8:2::2/64 55 ip address del dev $swp3 2001:db8:2::1/64 56 57 ip address del dev $h3 192.0.2.130/28 58 ip address del dev $swp3 192.0.2.129/28 59 60 sysctl_restore net.ipv6.conf.$swp3.keep_addr_on_down 61 62 mirror_gre_topo_destroy 63 vrf_cleanup 64} 65 66test_span_gre_ttl() 67{ 68 local tundev=$1; shift 69 local type=$1; shift 70 local prot=$1; shift 71 local what=$1; shift 72 73 RET=0 74 75 mirror_install $swp1 ingress $tundev "matchall $tcflags" 76 tc filter add dev $h3 ingress pref 77 prot $prot \ 77 flower skip_hw ip_ttl 50 action pass 78 79 mirror_test v$h1 192.0.2.1 192.0.2.2 $h3 77 0 80 81 ip link set dev $tundev type $type ttl 50 82 sleep 2 83 mirror_test v$h1 192.0.2.1 192.0.2.2 $h3 77 10 84 85 ip link set dev $tundev type $type ttl 100 86 tc filter del dev $h3 ingress pref 77 87 mirror_uninstall $swp1 ingress 88 89 log_test "$what: TTL change ($tcflags)" 90} 91 92test_span_gre_tun_up() 93{ 94 local tundev=$1; shift 95 local what=$1; shift 96 97 RET=0 98 99 ip link set dev $tundev down 100 mirror_install $swp1 ingress $tundev "matchall $tcflags" 101 fail_test_span_gre_dir $tundev ingress 102 103 ip link set dev $tundev up 104 105 quick_test_span_gre_dir $tundev ingress 106 mirror_uninstall $swp1 ingress 107 108 log_test "$what: tunnel down/up ($tcflags)" 109} 110 111test_span_gre_egress_up() 112{ 113 local tundev=$1; shift 114 local remote_ip=$1; shift 115 local what=$1; shift 116 117 RET=0 118 119 ip link set dev $swp3 down 120 mirror_install $swp1 ingress $tundev "matchall $tcflags" 121 fail_test_span_gre_dir $tundev ingress 122 123 # After setting the device up, wait for neighbor to get resolved so that 124 # we can expect mirroring to work. 125 ip link set dev $swp3 up 126 setup_wait_dev $swp3 127 ping -c 1 -I $swp3 $remote_ip &>/dev/null 128 129 quick_test_span_gre_dir $tundev ingress 130 mirror_uninstall $swp1 ingress 131 132 log_test "$what: egress down/up ($tcflags)" 133} 134 135test_span_gre_remote_ip() 136{ 137 local tundev=$1; shift 138 local type=$1; shift 139 local correct_ip=$1; shift 140 local wrong_ip=$1; shift 141 local what=$1; shift 142 143 RET=0 144 145 ip link set dev $tundev type $type remote $wrong_ip 146 mirror_install $swp1 ingress $tundev "matchall $tcflags" 147 fail_test_span_gre_dir $tundev ingress 148 149 ip link set dev $tundev type $type remote $correct_ip 150 quick_test_span_gre_dir $tundev ingress 151 mirror_uninstall $swp1 ingress 152 153 log_test "$what: remote address change ($tcflags)" 154} 155 156test_span_gre_tun_del() 157{ 158 local tundev=$1; shift 159 local type=$1; shift 160 local flags=$1; shift 161 local local_ip=$1; shift 162 local remote_ip=$1; shift 163 local what=$1; shift 164 165 RET=0 166 167 mirror_install $swp1 ingress $tundev "matchall $tcflags" 168 quick_test_span_gre_dir $tundev ingress 169 ip link del dev $tundev 170 fail_test_span_gre_dir $tundev ingress 171 172 tunnel_create $tundev $type $local_ip $remote_ip \ 173 ttl 100 tos inherit $flags 174 175 # Recreating the tunnel doesn't reestablish mirroring, so reinstall it 176 # and verify it works for the follow-up tests. 177 mirror_uninstall $swp1 ingress 178 mirror_install $swp1 ingress $tundev "matchall $tcflags" 179 quick_test_span_gre_dir $tundev ingress 180 mirror_uninstall $swp1 ingress 181 182 log_test "$what: tunnel deleted ($tcflags)" 183} 184 185test_span_gre_route_del() 186{ 187 local tundev=$1; shift 188 local edev=$1; shift 189 local route=$1; shift 190 local what=$1; shift 191 192 RET=0 193 194 mirror_install $swp1 ingress $tundev "matchall $tcflags" 195 quick_test_span_gre_dir $tundev ingress 196 197 ip route del $route dev $edev 198 fail_test_span_gre_dir $tundev ingress 199 200 ip route add $route dev $edev 201 quick_test_span_gre_dir $tundev ingress 202 203 mirror_uninstall $swp1 ingress 204 205 log_test "$what: underlay route removal ($tcflags)" 206} 207 208test_ttl() 209{ 210 test_span_gre_ttl gt4 gretap ip "mirror to gretap" 211 test_span_gre_ttl gt6 ip6gretap ipv6 "mirror to ip6gretap" 212} 213 214test_tun_up() 215{ 216 test_span_gre_tun_up gt4 "mirror to gretap" 217 test_span_gre_tun_up gt6 "mirror to ip6gretap" 218} 219 220test_egress_up() 221{ 222 test_span_gre_egress_up gt4 192.0.2.130 "mirror to gretap" 223 test_span_gre_egress_up gt6 2001:db8:2::2 "mirror to ip6gretap" 224} 225 226test_remote_ip() 227{ 228 test_span_gre_remote_ip gt4 gretap 192.0.2.130 192.0.2.132 "mirror to gretap" 229 test_span_gre_remote_ip gt6 ip6gretap 2001:db8:2::2 2001:db8:2::4 "mirror to ip6gretap" 230} 231 232test_tun_del() 233{ 234 test_span_gre_tun_del gt4 gretap "" \ 235 192.0.2.129 192.0.2.130 "mirror to gretap" 236 test_span_gre_tun_del gt6 ip6gretap allow-localremote \ 237 2001:db8:2::1 2001:db8:2::2 "mirror to ip6gretap" 238} 239 240test_route_del() 241{ 242 test_span_gre_route_del gt4 $swp3 192.0.2.128/28 "mirror to gretap" 243 test_span_gre_route_del gt6 $swp3 2001:db8:2::/64 "mirror to ip6gretap" 244} 245 246test_all() 247{ 248 slow_path_trap_install $swp1 ingress 249 slow_path_trap_install $swp1 egress 250 251 tests_run 252 253 slow_path_trap_uninstall $swp1 egress 254 slow_path_trap_uninstall $swp1 ingress 255} 256 257trap cleanup EXIT 258 259setup_prepare 260setup_wait 261 262tcflags="skip_hw" 263test_all 264 265if ! tc_offload_check; then 266 echo "WARN: Could not test offloaded functionality" 267else 268 tcflags="skip_sw" 269 test_all 270fi 271 272exit $EXIT_STATUS 273