1 /* SPDX-License-Identifier: ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) */ 2 /* 3 * include/uapi/linux/tipc_config.h: Header for TIPC configuration interface 4 * 5 * Copyright (c) 2003-2006, Ericsson AB 6 * Copyright (c) 2005-2007, 2010-2011, Wind River Systems 7 * All rights reserved. 8 * 9 * Redistribution and use in source and binary forms, with or without 10 * modification, are permitted provided that the following conditions are met: 11 * 12 * 1. Redistributions of source code must retain the above copyright 13 * notice, this list of conditions and the following disclaimer. 14 * 2. Redistributions in binary form must reproduce the above copyright 15 * notice, this list of conditions and the following disclaimer in the 16 * documentation and/or other materials provided with the distribution. 17 * 3. Neither the names of the copyright holders nor the names of its 18 * contributors may be used to endorse or promote products derived from 19 * this software without specific prior written permission. 20 * 21 * Alternatively, this software may be distributed under the terms of the 22 * GNU General Public License ("GPL") version 2 as published by the Free 23 * Software Foundation. 24 * 25 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" 26 * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 27 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 28 * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE 29 * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 30 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 31 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 32 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 33 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 34 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 35 * POSSIBILITY OF SUCH DAMAGE. 36 */ 37 38 #ifndef _LINUX_TIPC_CONFIG_H_ 39 #define _LINUX_TIPC_CONFIG_H_ 40 41 #include <linux/types.h> 42 #include <linux/string.h> 43 #include <linux/tipc.h> 44 #include <asm/byteorder.h> 45 46 #ifndef __KERNEL__ 47 #include <arpa/inet.h> /* for ntohs etc. */ 48 #endif 49 50 /* 51 * Configuration 52 * 53 * All configuration management messaging involves sending a request message 54 * to the TIPC configuration service on a node, which sends a reply message 55 * back. (In the future multi-message replies may be supported.) 56 * 57 * Both request and reply messages consist of a transport header and payload. 58 * The transport header contains info about the desired operation; 59 * the payload consists of zero or more type/length/value (TLV) items 60 * which specify parameters or results for the operation. 61 * 62 * For many operations, the request and reply messages have a fixed number 63 * of TLVs (usually zero or one); however, some reply messages may return 64 * a variable number of TLVs. A failed request is denoted by the presence 65 * of an "error string" TLV in the reply message instead of the TLV(s) the 66 * reply should contain if the request succeeds. 67 */ 68 69 /* 70 * Public commands: 71 * May be issued by any process. 72 * Accepted by own node, or by remote node only if remote management enabled. 73 */ 74 75 #define TIPC_CMD_NOOP 0x0000 /* tx none, rx none */ 76 #define TIPC_CMD_GET_NODES 0x0001 /* tx net_addr, rx node_info(s) */ 77 #define TIPC_CMD_GET_MEDIA_NAMES 0x0002 /* tx none, rx media_name(s) */ 78 #define TIPC_CMD_GET_BEARER_NAMES 0x0003 /* tx none, rx bearer_name(s) */ 79 #define TIPC_CMD_GET_LINKS 0x0004 /* tx net_addr, rx link_info(s) */ 80 #define TIPC_CMD_SHOW_NAME_TABLE 0x0005 /* tx name_tbl_query, rx ultra_string */ 81 #define TIPC_CMD_SHOW_PORTS 0x0006 /* tx none, rx ultra_string */ 82 #define TIPC_CMD_SHOW_LINK_STATS 0x000B /* tx link_name, rx ultra_string */ 83 #define TIPC_CMD_SHOW_STATS 0x000F /* tx unsigned, rx ultra_string */ 84 85 /* 86 * Protected commands: 87 * May only be issued by "network administration capable" process. 88 * Accepted by own node, or by remote node only if remote management enabled 89 * and this node is zone manager. 90 */ 91 92 #define TIPC_CMD_GET_REMOTE_MNG 0x4003 /* tx none, rx unsigned */ 93 #define TIPC_CMD_GET_MAX_PORTS 0x4004 /* tx none, rx unsigned */ 94 #define TIPC_CMD_GET_MAX_PUBL 0x4005 /* obsoleted */ 95 #define TIPC_CMD_GET_MAX_SUBSCR 0x4006 /* obsoleted */ 96 #define TIPC_CMD_GET_MAX_ZONES 0x4007 /* obsoleted */ 97 #define TIPC_CMD_GET_MAX_CLUSTERS 0x4008 /* obsoleted */ 98 #define TIPC_CMD_GET_MAX_NODES 0x4009 /* obsoleted */ 99 #define TIPC_CMD_GET_MAX_SLAVES 0x400A /* obsoleted */ 100 #define TIPC_CMD_GET_NETID 0x400B /* tx none, rx unsigned */ 101 102 #define TIPC_CMD_ENABLE_BEARER 0x4101 /* tx bearer_config, rx none */ 103 #define TIPC_CMD_DISABLE_BEARER 0x4102 /* tx bearer_name, rx none */ 104 #define TIPC_CMD_SET_LINK_TOL 0x4107 /* tx link_config, rx none */ 105 #define TIPC_CMD_SET_LINK_PRI 0x4108 /* tx link_config, rx none */ 106 #define TIPC_CMD_SET_LINK_WINDOW 0x4109 /* tx link_config, rx none */ 107 #define TIPC_CMD_SET_LOG_SIZE 0x410A /* obsoleted */ 108 #define TIPC_CMD_DUMP_LOG 0x410B /* obsoleted */ 109 #define TIPC_CMD_RESET_LINK_STATS 0x410C /* tx link_name, rx none */ 110 111 /* 112 * Private commands: 113 * May only be issued by "network administration capable" process. 114 * Accepted by own node only; cannot be used on a remote node. 115 */ 116 117 #define TIPC_CMD_SET_NODE_ADDR 0x8001 /* tx net_addr, rx none */ 118 #define TIPC_CMD_SET_REMOTE_MNG 0x8003 /* tx unsigned, rx none */ 119 #define TIPC_CMD_SET_MAX_PORTS 0x8004 /* tx unsigned, rx none */ 120 #define TIPC_CMD_SET_MAX_PUBL 0x8005 /* obsoleted */ 121 #define TIPC_CMD_SET_MAX_SUBSCR 0x8006 /* obsoleted */ 122 #define TIPC_CMD_SET_MAX_ZONES 0x8007 /* obsoleted */ 123 #define TIPC_CMD_SET_MAX_CLUSTERS 0x8008 /* obsoleted */ 124 #define TIPC_CMD_SET_MAX_NODES 0x8009 /* obsoleted */ 125 #define TIPC_CMD_SET_MAX_SLAVES 0x800A /* obsoleted */ 126 #define TIPC_CMD_SET_NETID 0x800B /* tx unsigned, rx none */ 127 128 /* 129 * Reserved commands: 130 * May not be issued by any process. 131 * Used internally by TIPC. 132 */ 133 134 #define TIPC_CMD_NOT_NET_ADMIN 0xC001 /* tx none, rx none */ 135 136 /* 137 * TLV types defined for TIPC 138 */ 139 140 #define TIPC_TLV_NONE 0 /* no TLV present */ 141 #define TIPC_TLV_VOID 1 /* empty TLV (0 data bytes)*/ 142 #define TIPC_TLV_UNSIGNED 2 /* 32-bit integer */ 143 #define TIPC_TLV_STRING 3 /* char[128] (max) */ 144 #define TIPC_TLV_LARGE_STRING 4 /* char[2048] (max) */ 145 #define TIPC_TLV_ULTRA_STRING 5 /* char[32768] (max) */ 146 147 #define TIPC_TLV_ERROR_STRING 16 /* char[128] containing "error code" */ 148 #define TIPC_TLV_NET_ADDR 17 /* 32-bit integer denoting <Z.C.N> */ 149 #define TIPC_TLV_MEDIA_NAME 18 /* char[TIPC_MAX_MEDIA_NAME] */ 150 #define TIPC_TLV_BEARER_NAME 19 /* char[TIPC_MAX_BEARER_NAME] */ 151 #define TIPC_TLV_LINK_NAME 20 /* char[TIPC_MAX_LINK_NAME] */ 152 #define TIPC_TLV_NODE_INFO 21 /* struct tipc_node_info */ 153 #define TIPC_TLV_LINK_INFO 22 /* struct tipc_link_info */ 154 #define TIPC_TLV_BEARER_CONFIG 23 /* struct tipc_bearer_config */ 155 #define TIPC_TLV_LINK_CONFIG 24 /* struct tipc_link_config */ 156 #define TIPC_TLV_NAME_TBL_QUERY 25 /* struct tipc_name_table_query */ 157 #define TIPC_TLV_PORT_REF 26 /* 32-bit port reference */ 158 159 /* 160 * Link priority limits (min, default, max, media default) 161 */ 162 163 #define TIPC_MIN_LINK_PRI 0 164 #define TIPC_DEF_LINK_PRI 10 165 #define TIPC_MAX_LINK_PRI 31 166 #define TIPC_MEDIA_LINK_PRI (TIPC_MAX_LINK_PRI + 1) 167 168 /* 169 * Link tolerance limits (min, default, max), in ms 170 */ 171 172 #define TIPC_MIN_LINK_TOL 50 173 #define TIPC_DEF_LINK_TOL 1500 174 #define TIPC_MAX_LINK_TOL 30000 175 176 #if (TIPC_MIN_LINK_TOL < 16) 177 #error "TIPC_MIN_LINK_TOL is too small (abort limit may be NaN)" 178 #endif 179 180 /* 181 * Link window limits (min, default, max), in packets 182 */ 183 184 #define TIPC_MIN_LINK_WIN 16 185 #define TIPC_DEF_LINK_WIN 50 186 #define TIPC_MAX_LINK_WIN 8191 187 188 /* 189 * Default MTU for UDP media 190 */ 191 192 #define TIPC_DEF_LINK_UDP_MTU 14000 193 194 struct tipc_node_info { 195 __be32 addr; /* network address of node */ 196 __be32 up; /* 0=down, 1= up */ 197 }; 198 199 struct tipc_link_info { 200 __be32 dest; /* network address of peer node */ 201 __be32 up; /* 0=down, 1=up */ 202 char str[TIPC_MAX_LINK_NAME]; /* link name */ 203 }; 204 205 struct tipc_bearer_config { 206 __be32 priority; /* Range [1,31]. Override per link */ 207 __be32 disc_domain; /* <Z.C.N> describing desired nodes */ 208 char name[TIPC_MAX_BEARER_NAME]; 209 }; 210 211 struct tipc_link_config { 212 __be32 value; 213 char name[TIPC_MAX_LINK_NAME]; 214 }; 215 216 #define TIPC_NTQ_ALLTYPES 0x80000000 217 218 struct tipc_name_table_query { 219 __be32 depth; /* 1:type, 2:+name info, 3:+port info, 4+:+debug info */ 220 __be32 type; /* {t,l,u} info ignored if high bit of "depth" is set */ 221 __be32 lowbound; /* (i.e. displays all entries of name table) */ 222 __be32 upbound; 223 }; 224 225 /* 226 * The error string TLV is a null-terminated string describing the cause 227 * of the request failure. To simplify error processing (and to save space) 228 * the first character of the string can be a special error code character 229 * (lying by the range 0x80 to 0xFF) which represents a pre-defined reason. 230 */ 231 232 #define TIPC_CFG_TLV_ERROR "\x80" /* request contains incorrect TLV(s) */ 233 #define TIPC_CFG_NOT_NET_ADMIN "\x81" /* must be network administrator */ 234 #define TIPC_CFG_NOT_ZONE_MSTR "\x82" /* must be zone master */ 235 #define TIPC_CFG_NO_REMOTE "\x83" /* remote management not enabled */ 236 #define TIPC_CFG_NOT_SUPPORTED "\x84" /* request is not supported by TIPC */ 237 #define TIPC_CFG_INVALID_VALUE "\x85" /* request has invalid argument value */ 238 239 /* 240 * A TLV consists of a descriptor, followed by the TLV value. 241 * TLV descriptor fields are stored in network byte order; 242 * TLV values must also be stored in network byte order (where applicable). 243 * TLV descriptors must be aligned to addresses which are multiple of 4, 244 * so up to 3 bytes of padding may exist at the end of the TLV value area. 245 * There must not be any padding between the TLV descriptor and its value. 246 */ 247 248 struct tlv_desc { 249 __be16 tlv_len; /* TLV length (descriptor + value) */ 250 __be16 tlv_type; /* TLV identifier */ 251 }; 252 253 #define TLV_ALIGNTO 4 254 255 #define TLV_ALIGN(datalen) (((datalen)+(TLV_ALIGNTO-1)) & ~(TLV_ALIGNTO-1)) 256 #define TLV_LENGTH(datalen) (sizeof(struct tlv_desc) + (datalen)) 257 #define TLV_SPACE(datalen) (TLV_ALIGN(TLV_LENGTH(datalen))) 258 #define TLV_DATA(tlv) ((void *)((char *)(tlv) + TLV_LENGTH(0))) 259 260 static inline int TLV_OK(const void *tlv, __u16 space) 261 { 262 /* 263 * Would also like to check that "tlv" is a multiple of 4, 264 * but don't know how to do this in a portable way. 265 * - Tried doing (!(tlv & (TLV_ALIGNTO-1))), but GCC compiler 266 * won't allow binary "&" with a pointer. 267 * - Tried casting "tlv" to integer type, but causes warning about size 268 * mismatch when pointer is bigger than chosen type (int, long, ...). 269 */ 270 271 return (space >= TLV_SPACE(0)) && 272 (ntohs(((struct tlv_desc *)tlv)->tlv_len) <= space); 273 } 274 275 static inline int TLV_CHECK(const void *tlv, __u16 space, __u16 exp_type) 276 { 277 return TLV_OK(tlv, space) && 278 (ntohs(((struct tlv_desc *)tlv)->tlv_type) == exp_type); 279 } 280 281 static inline int TLV_GET_LEN(struct tlv_desc *tlv) 282 { 283 return ntohs(tlv->tlv_len); 284 } 285 286 static inline void TLV_SET_LEN(struct tlv_desc *tlv, __u16 len) 287 { 288 tlv->tlv_len = htons(len); 289 } 290 291 static inline int TLV_CHECK_TYPE(struct tlv_desc *tlv, __u16 type) 292 { 293 return (ntohs(tlv->tlv_type) == type); 294 } 295 296 static inline void TLV_SET_TYPE(struct tlv_desc *tlv, __u16 type) 297 { 298 tlv->tlv_type = htons(type); 299 } 300 301 static inline int TLV_SET(void *tlv, __u16 type, void *data, __u16 len) 302 { 303 struct tlv_desc *tlv_ptr; 304 int tlv_len; 305 306 tlv_len = TLV_LENGTH(len); 307 tlv_ptr = (struct tlv_desc *)tlv; 308 tlv_ptr->tlv_type = htons(type); 309 tlv_ptr->tlv_len = htons(tlv_len); 310 if (len && data) { 311 memcpy(TLV_DATA(tlv_ptr), data, len); 312 memset(TLV_DATA(tlv_ptr) + len, 0, TLV_SPACE(len) - tlv_len); 313 } 314 return TLV_SPACE(len); 315 } 316 317 /* 318 * A TLV list descriptor simplifies processing of messages 319 * containing multiple TLVs. 320 */ 321 322 struct tlv_list_desc { 323 struct tlv_desc *tlv_ptr; /* ptr to current TLV */ 324 __u32 tlv_space; /* # bytes from curr TLV to list end */ 325 }; 326 327 static inline void TLV_LIST_INIT(struct tlv_list_desc *list, 328 void *data, __u32 space) 329 { 330 list->tlv_ptr = (struct tlv_desc *)data; 331 list->tlv_space = space; 332 } 333 334 static inline int TLV_LIST_EMPTY(struct tlv_list_desc *list) 335 { 336 return (list->tlv_space == 0); 337 } 338 339 static inline int TLV_LIST_CHECK(struct tlv_list_desc *list, __u16 exp_type) 340 { 341 return TLV_CHECK(list->tlv_ptr, list->tlv_space, exp_type); 342 } 343 344 static inline void *TLV_LIST_DATA(struct tlv_list_desc *list) 345 { 346 return TLV_DATA(list->tlv_ptr); 347 } 348 349 static inline void TLV_LIST_STEP(struct tlv_list_desc *list) 350 { 351 __u16 tlv_space = TLV_ALIGN(ntohs(list->tlv_ptr->tlv_len)); 352 353 list->tlv_ptr = (struct tlv_desc *)((char *)list->tlv_ptr + tlv_space); 354 list->tlv_space -= tlv_space; 355 } 356 357 /* 358 * Configuration messages exchanged via NETLINK_GENERIC use the following 359 * family id, name, version and command. 360 */ 361 #define TIPC_GENL_NAME "TIPC" 362 #define TIPC_GENL_VERSION 0x1 363 #define TIPC_GENL_CMD 0x1 364 365 /* 366 * TIPC specific header used in NETLINK_GENERIC requests. 367 */ 368 struct tipc_genlmsghdr { 369 __u32 dest; /* Destination address */ 370 __u16 cmd; /* Command */ 371 __u16 reserved; /* Unused */ 372 }; 373 374 #define TIPC_GENL_HDRLEN NLMSG_ALIGN(sizeof(struct tipc_genlmsghdr)) 375 376 /* 377 * Configuration messages exchanged via TIPC sockets use the TIPC configuration 378 * message header, which is defined below. This structure is analogous 379 * to the Netlink message header, but fields are stored in network byte order 380 * and no padding is permitted between the header and the message data 381 * that follows. 382 */ 383 384 struct tipc_cfg_msg_hdr { 385 __be32 tcm_len; /* Message length (including header) */ 386 __be16 tcm_type; /* Command type */ 387 __be16 tcm_flags; /* Additional flags */ 388 char tcm_reserved[8]; /* Unused */ 389 }; 390 391 #define TCM_F_REQUEST 0x1 /* Flag: Request message */ 392 #define TCM_F_MORE 0x2 /* Flag: Message to be continued */ 393 394 #define TCM_ALIGN(datalen) (((datalen)+3) & ~3) 395 #define TCM_LENGTH(datalen) (sizeof(struct tipc_cfg_msg_hdr) + datalen) 396 #define TCM_SPACE(datalen) (TCM_ALIGN(TCM_LENGTH(datalen))) 397 #define TCM_DATA(tcm_hdr) ((void *)((char *)(tcm_hdr) + TCM_LENGTH(0))) 398 399 static inline int TCM_SET(void *msg, __u16 cmd, __u16 flags, 400 void *data, __u16 data_len) 401 { 402 struct tipc_cfg_msg_hdr *tcm_hdr; 403 int msg_len; 404 405 msg_len = TCM_LENGTH(data_len); 406 tcm_hdr = (struct tipc_cfg_msg_hdr *)msg; 407 tcm_hdr->tcm_len = htonl(msg_len); 408 tcm_hdr->tcm_type = htons(cmd); 409 tcm_hdr->tcm_flags = htons(flags); 410 if (data_len && data) { 411 memcpy(TCM_DATA(msg), data, data_len); 412 memset(TCM_DATA(msg) + data_len, 0, TCM_SPACE(data_len) - msg_len); 413 } 414 return TCM_SPACE(data_len); 415 } 416 417 #endif 418