xref: /linux/include/linux/sunrpc/msg_prot.h (revision 60063497a95e716c9a689af3be2687d261f115b4)
1 /*
2  * linux/include/linux/sunrpc/msg_prot.h
3  *
4  * Copyright (C) 1996, Olaf Kirch <okir@monad.swb.de>
5  */
6 
7 #ifndef _LINUX_SUNRPC_MSGPROT_H_
8 #define _LINUX_SUNRPC_MSGPROT_H_
9 
10 #ifdef __KERNEL__ /* user programs should get these from the rpc header files */
11 
12 #define RPC_VERSION 2
13 
14 /* size of an XDR encoding unit in bytes, i.e. 32bit */
15 #define XDR_UNIT	(4)
16 
17 /* spec defines authentication flavor as an unsigned 32 bit integer */
18 typedef u32	rpc_authflavor_t;
19 
20 enum rpc_auth_flavors {
21 	RPC_AUTH_NULL  = 0,
22 	RPC_AUTH_UNIX  = 1,
23 	RPC_AUTH_SHORT = 2,
24 	RPC_AUTH_DES   = 3,
25 	RPC_AUTH_KRB   = 4,
26 	RPC_AUTH_GSS   = 6,
27 	RPC_AUTH_MAXFLAVOR = 8,
28 	/* pseudoflavors: */
29 	RPC_AUTH_GSS_KRB5  = 390003,
30 	RPC_AUTH_GSS_KRB5I = 390004,
31 	RPC_AUTH_GSS_KRB5P = 390005,
32 	RPC_AUTH_GSS_LKEY  = 390006,
33 	RPC_AUTH_GSS_LKEYI = 390007,
34 	RPC_AUTH_GSS_LKEYP = 390008,
35 	RPC_AUTH_GSS_SPKM  = 390009,
36 	RPC_AUTH_GSS_SPKMI = 390010,
37 	RPC_AUTH_GSS_SPKMP = 390011,
38 };
39 
40 /* Maximum size (in bytes) of an rpc credential or verifier */
41 #define RPC_MAX_AUTH_SIZE (400)
42 
43 enum rpc_msg_type {
44 	RPC_CALL = 0,
45 	RPC_REPLY = 1
46 };
47 
48 enum rpc_reply_stat {
49 	RPC_MSG_ACCEPTED = 0,
50 	RPC_MSG_DENIED = 1
51 };
52 
53 enum rpc_accept_stat {
54 	RPC_SUCCESS = 0,
55 	RPC_PROG_UNAVAIL = 1,
56 	RPC_PROG_MISMATCH = 2,
57 	RPC_PROC_UNAVAIL = 3,
58 	RPC_GARBAGE_ARGS = 4,
59 	RPC_SYSTEM_ERR = 5,
60 	/* internal use only */
61 	RPC_DROP_REPLY = 60000,
62 };
63 
64 enum rpc_reject_stat {
65 	RPC_MISMATCH = 0,
66 	RPC_AUTH_ERROR = 1
67 };
68 
69 enum rpc_auth_stat {
70 	RPC_AUTH_OK = 0,
71 	RPC_AUTH_BADCRED = 1,
72 	RPC_AUTH_REJECTEDCRED = 2,
73 	RPC_AUTH_BADVERF = 3,
74 	RPC_AUTH_REJECTEDVERF = 4,
75 	RPC_AUTH_TOOWEAK = 5,
76 	/* RPCSEC_GSS errors */
77 	RPCSEC_GSS_CREDPROBLEM = 13,
78 	RPCSEC_GSS_CTXPROBLEM = 14
79 };
80 
81 #define RPC_MAXNETNAMELEN	256
82 
83 /*
84  * From RFC 1831:
85  *
86  * "A record is composed of one or more record fragments.  A record
87  *  fragment is a four-byte header followed by 0 to (2**31) - 1 bytes of
88  *  fragment data.  The bytes encode an unsigned binary number; as with
89  *  XDR integers, the byte order is from highest to lowest.  The number
90  *  encodes two values -- a boolean which indicates whether the fragment
91  *  is the last fragment of the record (bit value 1 implies the fragment
92  *  is the last fragment) and a 31-bit unsigned binary value which is the
93  *  length in bytes of the fragment's data.  The boolean value is the
94  *  highest-order bit of the header; the length is the 31 low-order bits.
95  *  (Note that this record specification is NOT in XDR standard form!)"
96  *
97  * The Linux RPC client always sends its requests in a single record
98  * fragment, limiting the maximum payload size for stream transports to
99  * 2GB.
100  */
101 
102 typedef __be32	rpc_fraghdr;
103 
104 #define	RPC_LAST_STREAM_FRAGMENT	(1U << 31)
105 #define	RPC_FRAGMENT_SIZE_MASK		(~RPC_LAST_STREAM_FRAGMENT)
106 #define	RPC_MAX_FRAGMENT_SIZE		((1U << 31) - 1)
107 
108 /*
109  * RPC call and reply header size as number of 32bit words (verifier
110  * size computed separately, see below)
111  */
112 #define RPC_CALLHDRSIZE		(6)
113 #define RPC_REPHDRSIZE		(4)
114 
115 
116 /*
117  * Maximum RPC header size, including authentication,
118  * as number of 32bit words (see RFCs 1831, 1832).
119  *
120  *	xid			    1 xdr unit = 4 bytes
121  *	mtype			    1
122  *	rpc_version		    1
123  *	program			    1
124  *	prog_version		    1
125  *	procedure		    1
126  *	cred {
127  *	    flavor		    1
128  *	    length		    1
129  *	    body<RPC_MAX_AUTH_SIZE> 100 xdr units = 400 bytes
130  *	}
131  *	verf {
132  *	    flavor		    1
133  *	    length		    1
134  *	    body<RPC_MAX_AUTH_SIZE> 100 xdr units = 400 bytes
135  *	}
136  *	TOTAL			    210 xdr units = 840 bytes
137  */
138 #define RPC_MAX_HEADER_WITH_AUTH \
139 	(RPC_CALLHDRSIZE + 2*(2+RPC_MAX_AUTH_SIZE/4))
140 
141 /*
142  * RFC1833/RFC3530 rpcbind (v3+) well-known netid's.
143  */
144 #define RPCBIND_NETID_UDP	"udp"
145 #define RPCBIND_NETID_TCP	"tcp"
146 #define RPCBIND_NETID_UDP6	"udp6"
147 #define RPCBIND_NETID_TCP6	"tcp6"
148 #define RPCBIND_NETID_LOCAL	"local"
149 
150 /*
151  * Note that RFC 1833 does not put any size restrictions on the
152  * netid string, but all currently defined netid's fit in 4 bytes.
153  */
154 #define RPCBIND_MAXNETIDLEN	(4u)
155 
156 /*
157  * Universal addresses are introduced in RFC 1833 and further spelled
158  * out in RFC 3530.  RPCBIND_MAXUADDRLEN defines a maximum byte length
159  * of a universal address for use in allocating buffers and character
160  * arrays.
161  *
162  * Quoting RFC 3530, section 2.2:
163  *
164  * For TCP over IPv4 and for UDP over IPv4, the format of r_addr is the
165  * US-ASCII string:
166  *
167  *	h1.h2.h3.h4.p1.p2
168  *
169  * The prefix, "h1.h2.h3.h4", is the standard textual form for
170  * representing an IPv4 address, which is always four octets long.
171  * Assuming big-endian ordering, h1, h2, h3, and h4, are respectively,
172  * the first through fourth octets each converted to ASCII-decimal.
173  * Assuming big-endian ordering, p1 and p2 are, respectively, the first
174  * and second octets each converted to ASCII-decimal.  For example, if a
175  * host, in big-endian order, has an address of 0x0A010307 and there is
176  * a service listening on, in big endian order, port 0x020F (decimal
177  * 527), then the complete universal address is "10.1.3.7.2.15".
178  *
179  * ...
180  *
181  * For TCP over IPv6 and for UDP over IPv6, the format of r_addr is the
182  * US-ASCII string:
183  *
184  *	x1:x2:x3:x4:x5:x6:x7:x8.p1.p2
185  *
186  * The suffix "p1.p2" is the service port, and is computed the same way
187  * as with universal addresses for TCP and UDP over IPv4.  The prefix,
188  * "x1:x2:x3:x4:x5:x6:x7:x8", is the standard textual form for
189  * representing an IPv6 address as defined in Section 2.2 of [RFC2373].
190  * Additionally, the two alternative forms specified in Section 2.2 of
191  * [RFC2373] are also acceptable.
192  */
193 
194 #include <linux/inet.h>
195 
196 /* Maximum size of the port number part of a universal address */
197 #define RPCBIND_MAXUADDRPLEN	sizeof(".255.255")
198 
199 /* Maximum size of an IPv4 universal address */
200 #define RPCBIND_MAXUADDR4LEN	\
201 		(INET_ADDRSTRLEN + RPCBIND_MAXUADDRPLEN)
202 
203 /* Maximum size of an IPv6 universal address */
204 #define RPCBIND_MAXUADDR6LEN	\
205 		(INET6_ADDRSTRLEN + RPCBIND_MAXUADDRPLEN)
206 
207 /* Assume INET6_ADDRSTRLEN will always be larger than INET_ADDRSTRLEN... */
208 #define RPCBIND_MAXUADDRLEN	RPCBIND_MAXUADDR6LEN
209 
210 #endif /* __KERNEL__ */
211 #endif /* _LINUX_SUNRPC_MSGPROT_H_ */
212