1 /* 2 * Remote Processor Framework 3 * 4 * Copyright(c) 2011 Texas Instruments, Inc. 5 * Copyright(c) 2011 Google, Inc. 6 * All rights reserved. 7 * 8 * Redistribution and use in source and binary forms, with or without 9 * modification, are permitted provided that the following conditions 10 * are met: 11 * 12 * * Redistributions of source code must retain the above copyright 13 * notice, this list of conditions and the following disclaimer. 14 * * Redistributions in binary form must reproduce the above copyright 15 * notice, this list of conditions and the following disclaimer in 16 * the documentation and/or other materials provided with the 17 * distribution. 18 * * Neither the name Texas Instruments nor the names of its 19 * contributors may be used to endorse or promote products derived 20 * from this software without specific prior written permission. 21 * 22 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 23 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 24 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR 25 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT 26 * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 27 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT 28 * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, 29 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 30 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 31 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE 32 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 33 */ 34 35 #ifndef REMOTEPROC_H 36 #define REMOTEPROC_H 37 38 #include <linux/types.h> 39 #include <linux/mutex.h> 40 #include <linux/virtio.h> 41 #include <linux/completion.h> 42 #include <linux/idr.h> 43 #include <linux/of.h> 44 45 /** 46 * struct resource_table - firmware resource table header 47 * @ver: version number 48 * @num: number of resource entries 49 * @reserved: reserved (must be zero) 50 * @offset: array of offsets pointing at the various resource entries 51 * 52 * A resource table is essentially a list of system resources required 53 * by the remote processor. It may also include configuration entries. 54 * If needed, the remote processor firmware should contain this table 55 * as a dedicated ".resource_table" ELF section. 56 * 57 * Some resources entries are mere announcements, where the host is informed 58 * of specific remoteproc configuration. Other entries require the host to 59 * do something (e.g. allocate a system resource). Sometimes a negotiation 60 * is expected, where the firmware requests a resource, and once allocated, 61 * the host should provide back its details (e.g. address of an allocated 62 * memory region). 63 * 64 * The header of the resource table, as expressed by this structure, 65 * contains a version number (should we need to change this format in the 66 * future), the number of available resource entries, and their offsets 67 * in the table. 68 * 69 * Immediately following this header are the resource entries themselves, 70 * each of which begins with a resource entry header (as described below). 71 */ 72 struct resource_table { 73 u32 ver; 74 u32 num; 75 u32 reserved[2]; 76 u32 offset[]; 77 } __packed; 78 79 /** 80 * struct fw_rsc_hdr - firmware resource entry header 81 * @type: resource type 82 * @data: resource data 83 * 84 * Every resource entry begins with a 'struct fw_rsc_hdr' header providing 85 * its @type. The content of the entry itself will immediately follow 86 * this header, and it should be parsed according to the resource type. 87 */ 88 struct fw_rsc_hdr { 89 u32 type; 90 u8 data[]; 91 } __packed; 92 93 /** 94 * enum fw_resource_type - types of resource entries 95 * 96 * @RSC_CARVEOUT: request for allocation of a physically contiguous 97 * memory region. 98 * @RSC_DEVMEM: request to iommu_map a memory-based peripheral. 99 * @RSC_TRACE: announces the availability of a trace buffer into which 100 * the remote processor will be writing logs. 101 * @RSC_VDEV: declare support for a virtio device, and serve as its 102 * virtio header. 103 * @RSC_LAST: just keep this one at the end of standard resources 104 * @RSC_VENDOR_START: start of the vendor specific resource types range 105 * @RSC_VENDOR_END: end of the vendor specific resource types range 106 * 107 * For more details regarding a specific resource type, please see its 108 * dedicated structure below. 109 * 110 * Please note that these values are used as indices to the rproc_handle_rsc 111 * lookup table, so please keep them sane. Moreover, @RSC_LAST is used to 112 * check the validity of an index before the lookup table is accessed, so 113 * please update it as needed. 114 */ 115 enum fw_resource_type { 116 RSC_CARVEOUT = 0, 117 RSC_DEVMEM = 1, 118 RSC_TRACE = 2, 119 RSC_VDEV = 3, 120 RSC_LAST = 4, 121 RSC_VENDOR_START = 128, 122 RSC_VENDOR_END = 512, 123 }; 124 125 #define FW_RSC_ADDR_ANY (-1) 126 127 /** 128 * struct fw_rsc_carveout - physically contiguous memory request 129 * @da: device address 130 * @pa: physical address 131 * @len: length (in bytes) 132 * @flags: iommu protection flags 133 * @reserved: reserved (must be zero) 134 * @name: human-readable name of the requested memory region 135 * 136 * This resource entry requests the host to allocate a physically contiguous 137 * memory region. 138 * 139 * These request entries should precede other firmware resource entries, 140 * as other entries might request placing other data objects inside 141 * these memory regions (e.g. data/code segments, trace resource entries, ...). 142 * 143 * Allocating memory this way helps utilizing the reserved physical memory 144 * (e.g. CMA) more efficiently, and also minimizes the number of TLB entries 145 * needed to map it (in case @rproc is using an IOMMU). Reducing the TLB 146 * pressure is important; it may have a substantial impact on performance. 147 * 148 * If the firmware is compiled with static addresses, then @da should specify 149 * the expected device address of this memory region. If @da is set to 150 * FW_RSC_ADDR_ANY, then the host will dynamically allocate it, and then 151 * overwrite @da with the dynamically allocated address. 152 * 153 * We will always use @da to negotiate the device addresses, even if it 154 * isn't using an iommu. In that case, though, it will obviously contain 155 * physical addresses. 156 * 157 * Some remote processors needs to know the allocated physical address 158 * even if they do use an iommu. This is needed, e.g., if they control 159 * hardware accelerators which access the physical memory directly (this 160 * is the case with OMAP4 for instance). In that case, the host will 161 * overwrite @pa with the dynamically allocated physical address. 162 * Generally we don't want to expose physical addresses if we don't have to 163 * (remote processors are generally _not_ trusted), so we might want to 164 * change this to happen _only_ when explicitly required by the hardware. 165 * 166 * @flags is used to provide IOMMU protection flags, and @name should 167 * (optionally) contain a human readable name of this carveout region 168 * (mainly for debugging purposes). 169 */ 170 struct fw_rsc_carveout { 171 u32 da; 172 u32 pa; 173 u32 len; 174 u32 flags; 175 u32 reserved; 176 u8 name[32]; 177 } __packed; 178 179 /** 180 * struct fw_rsc_devmem - iommu mapping request 181 * @da: device address 182 * @pa: physical address 183 * @len: length (in bytes) 184 * @flags: iommu protection flags 185 * @reserved: reserved (must be zero) 186 * @name: human-readable name of the requested region to be mapped 187 * 188 * This resource entry requests the host to iommu map a physically contiguous 189 * memory region. This is needed in case the remote processor requires 190 * access to certain memory-based peripherals; _never_ use it to access 191 * regular memory. 192 * 193 * This is obviously only needed if the remote processor is accessing memory 194 * via an iommu. 195 * 196 * @da should specify the required device address, @pa should specify 197 * the physical address we want to map, @len should specify the size of 198 * the mapping and @flags is the IOMMU protection flags. As always, @name may 199 * (optionally) contain a human readable name of this mapping (mainly for 200 * debugging purposes). 201 * 202 * Note: at this point we just "trust" those devmem entries to contain valid 203 * physical addresses, but this isn't safe and will be changed: eventually we 204 * want remoteproc implementations to provide us ranges of physical addresses 205 * the firmware is allowed to request, and not allow firmwares to request 206 * access to physical addresses that are outside those ranges. 207 */ 208 struct fw_rsc_devmem { 209 u32 da; 210 u32 pa; 211 u32 len; 212 u32 flags; 213 u32 reserved; 214 u8 name[32]; 215 } __packed; 216 217 /** 218 * struct fw_rsc_trace - trace buffer declaration 219 * @da: device address 220 * @len: length (in bytes) 221 * @reserved: reserved (must be zero) 222 * @name: human-readable name of the trace buffer 223 * 224 * This resource entry provides the host information about a trace buffer 225 * into which the remote processor will write log messages. 226 * 227 * @da specifies the device address of the buffer, @len specifies 228 * its size, and @name may contain a human readable name of the trace buffer. 229 * 230 * After booting the remote processor, the trace buffers are exposed to the 231 * user via debugfs entries (called trace0, trace1, etc..). 232 */ 233 struct fw_rsc_trace { 234 u32 da; 235 u32 len; 236 u32 reserved; 237 u8 name[32]; 238 } __packed; 239 240 /** 241 * struct fw_rsc_vdev_vring - vring descriptor entry 242 * @da: device address 243 * @align: the alignment between the consumer and producer parts of the vring 244 * @num: num of buffers supported by this vring (must be power of two) 245 * @notifyid is a unique rproc-wide notify index for this vring. This notify 246 * index is used when kicking a remote processor, to let it know that this 247 * vring is triggered. 248 * @pa: physical address 249 * 250 * This descriptor is not a resource entry by itself; it is part of the 251 * vdev resource type (see below). 252 * 253 * Note that @da should either contain the device address where 254 * the remote processor is expecting the vring, or indicate that 255 * dynamically allocation of the vring's device address is supported. 256 */ 257 struct fw_rsc_vdev_vring { 258 u32 da; 259 u32 align; 260 u32 num; 261 u32 notifyid; 262 u32 pa; 263 } __packed; 264 265 /** 266 * struct fw_rsc_vdev - virtio device header 267 * @id: virtio device id (as in virtio_ids.h) 268 * @notifyid is a unique rproc-wide notify index for this vdev. This notify 269 * index is used when kicking a remote processor, to let it know that the 270 * status/features of this vdev have changes. 271 * @dfeatures specifies the virtio device features supported by the firmware 272 * @gfeatures is a place holder used by the host to write back the 273 * negotiated features that are supported by both sides. 274 * @config_len is the size of the virtio config space of this vdev. The config 275 * space lies in the resource table immediate after this vdev header. 276 * @status is a place holder where the host will indicate its virtio progress. 277 * @num_of_vrings indicates how many vrings are described in this vdev header 278 * @reserved: reserved (must be zero) 279 * @vring is an array of @num_of_vrings entries of 'struct fw_rsc_vdev_vring'. 280 * 281 * This resource is a virtio device header: it provides information about 282 * the vdev, and is then used by the host and its peer remote processors 283 * to negotiate and share certain virtio properties. 284 * 285 * By providing this resource entry, the firmware essentially asks remoteproc 286 * to statically allocate a vdev upon registration of the rproc (dynamic vdev 287 * allocation is not yet supported). 288 * 289 * Note: unlike virtualization systems, the term 'host' here means 290 * the Linux side which is running remoteproc to control the remote 291 * processors. We use the name 'gfeatures' to comply with virtio's terms, 292 * though there isn't really any virtualized guest OS here: it's the host 293 * which is responsible for negotiating the final features. 294 * Yeah, it's a bit confusing. 295 * 296 * Note: immediately following this structure is the virtio config space for 297 * this vdev (which is specific to the vdev; for more info, read the virtio 298 * spec). the size of the config space is specified by @config_len. 299 */ 300 struct fw_rsc_vdev { 301 u32 id; 302 u32 notifyid; 303 u32 dfeatures; 304 u32 gfeatures; 305 u32 config_len; 306 u8 status; 307 u8 num_of_vrings; 308 u8 reserved[2]; 309 struct fw_rsc_vdev_vring vring[]; 310 } __packed; 311 312 struct rproc; 313 314 /** 315 * struct rproc_mem_entry - memory entry descriptor 316 * @va: virtual address 317 * @dma: dma address 318 * @len: length, in bytes 319 * @da: device address 320 * @release: release associated memory 321 * @priv: associated data 322 * @name: associated memory region name (optional) 323 * @node: list node 324 * @rsc_offset: offset in resource table 325 * @flags: iommu protection flags 326 * @of_resm_idx: reserved memory phandle index 327 * @alloc: specific memory allocator function 328 */ 329 struct rproc_mem_entry { 330 void *va; 331 dma_addr_t dma; 332 size_t len; 333 u32 da; 334 void *priv; 335 char name[32]; 336 struct list_head node; 337 u32 rsc_offset; 338 u32 flags; 339 u32 of_resm_idx; 340 int (*alloc)(struct rproc *rproc, struct rproc_mem_entry *mem); 341 int (*release)(struct rproc *rproc, struct rproc_mem_entry *mem); 342 }; 343 344 struct firmware; 345 346 /** 347 * enum rsc_handling_status - return status of rproc_ops handle_rsc hook 348 * @RSC_HANDLED: resource was handled 349 * @RSC_IGNORED: resource was ignored 350 */ 351 enum rsc_handling_status { 352 RSC_HANDLED = 0, 353 RSC_IGNORED = 1, 354 }; 355 356 /** 357 * struct rproc_ops - platform-specific device handlers 358 * @prepare: prepare device for code loading 359 * @unprepare: unprepare device after stop 360 * @start: power on the device and boot it 361 * @stop: power off the device 362 * @kick: kick a virtqueue (virtqueue id given as a parameter) 363 * @da_to_va: optional platform hook to perform address translations 364 * @parse_fw: parse firmware to extract information (e.g. resource table) 365 * @handle_rsc: optional platform hook to handle vendor resources. Should return 366 * RSC_HANDLED if resource was handled, RSC_IGNORED if not handled and a 367 * negative value on error 368 * @load_rsc_table: load resource table from firmware image 369 * @find_loaded_rsc_table: find the loaded resouce table 370 * @load: load firmware to memory, where the remote processor 371 * expects to find it 372 * @sanity_check: sanity check the fw image 373 * @get_boot_addr: get boot address to entry point specified in firmware 374 * @panic: optional callback to react to system panic, core will delay 375 * panic at least the returned number of milliseconds 376 */ 377 struct rproc_ops { 378 int (*prepare)(struct rproc *rproc); 379 int (*unprepare)(struct rproc *rproc); 380 int (*start)(struct rproc *rproc); 381 int (*stop)(struct rproc *rproc); 382 void (*kick)(struct rproc *rproc, int vqid); 383 void * (*da_to_va)(struct rproc *rproc, u64 da, size_t len); 384 int (*parse_fw)(struct rproc *rproc, const struct firmware *fw); 385 int (*handle_rsc)(struct rproc *rproc, u32 rsc_type, void *rsc, 386 int offset, int avail); 387 struct resource_table *(*find_loaded_rsc_table)( 388 struct rproc *rproc, const struct firmware *fw); 389 int (*load)(struct rproc *rproc, const struct firmware *fw); 390 int (*sanity_check)(struct rproc *rproc, const struct firmware *fw); 391 u64 (*get_boot_addr)(struct rproc *rproc, const struct firmware *fw); 392 unsigned long (*panic)(struct rproc *rproc); 393 }; 394 395 /** 396 * enum rproc_state - remote processor states 397 * @RPROC_OFFLINE: device is powered off 398 * @RPROC_SUSPENDED: device is suspended; needs to be woken up to receive 399 * a message. 400 * @RPROC_RUNNING: device is up and running 401 * @RPROC_CRASHED: device has crashed; need to start recovery 402 * @RPROC_DELETED: device is deleted 403 * @RPROC_LAST: just keep this one at the end 404 * 405 * Please note that the values of these states are used as indices 406 * to rproc_state_string, a state-to-name lookup table, 407 * so please keep the two synchronized. @RPROC_LAST is used to check 408 * the validity of an index before the lookup table is accessed, so 409 * please update it as needed too. 410 */ 411 enum rproc_state { 412 RPROC_OFFLINE = 0, 413 RPROC_SUSPENDED = 1, 414 RPROC_RUNNING = 2, 415 RPROC_CRASHED = 3, 416 RPROC_DELETED = 4, 417 RPROC_LAST = 5, 418 }; 419 420 /** 421 * enum rproc_crash_type - remote processor crash types 422 * @RPROC_MMUFAULT: iommu fault 423 * @RPROC_WATCHDOG: watchdog bite 424 * @RPROC_FATAL_ERROR fatal error 425 * 426 * Each element of the enum is used as an array index. So that, the value of 427 * the elements should be always something sane. 428 * 429 * Feel free to add more types when needed. 430 */ 431 enum rproc_crash_type { 432 RPROC_MMUFAULT, 433 RPROC_WATCHDOG, 434 RPROC_FATAL_ERROR, 435 }; 436 437 /** 438 * struct rproc_dump_segment - segment info from ELF header 439 * @node: list node related to the rproc segment list 440 * @da: device address of the segment 441 * @size: size of the segment 442 * @priv: private data associated with the dump_segment 443 * @dump: custom dump function to fill device memory segment associated 444 * with coredump 445 */ 446 struct rproc_dump_segment { 447 struct list_head node; 448 449 dma_addr_t da; 450 size_t size; 451 452 void *priv; 453 void (*dump)(struct rproc *rproc, struct rproc_dump_segment *segment, 454 void *dest); 455 loff_t offset; 456 }; 457 458 /** 459 * struct rproc - represents a physical remote processor device 460 * @node: list node of this rproc object 461 * @domain: iommu domain 462 * @name: human readable name of the rproc 463 * @firmware: name of firmware file to be loaded 464 * @priv: private data which belongs to the platform-specific rproc module 465 * @ops: platform-specific start/stop rproc handlers 466 * @dev: virtual device for refcounting and common remoteproc behavior 467 * @power: refcount of users who need this rproc powered up 468 * @state: state of the device 469 * @lock: lock which protects concurrent manipulations of the rproc 470 * @dbg_dir: debugfs directory of this rproc device 471 * @traces: list of trace buffers 472 * @num_traces: number of trace buffers 473 * @carveouts: list of physically contiguous memory allocations 474 * @mappings: list of iommu mappings we initiated, needed on shutdown 475 * @bootaddr: address of first instruction to boot rproc with (optional) 476 * @rvdevs: list of remote virtio devices 477 * @subdevs: list of subdevices, to following the running state 478 * @notifyids: idr for dynamically assigning rproc-wide unique notify ids 479 * @index: index of this rproc device 480 * @crash_handler: workqueue for handling a crash 481 * @crash_cnt: crash counter 482 * @recovery_disabled: flag that state if recovery was disabled 483 * @max_notifyid: largest allocated notify id. 484 * @table_ptr: pointer to the resource table in effect 485 * @cached_table: copy of the resource table 486 * @table_sz: size of @cached_table 487 * @has_iommu: flag to indicate if remote processor is behind an MMU 488 * @auto_boot: flag to indicate if remote processor should be auto-started 489 * @dump_segments: list of segments in the firmware 490 * @nb_vdev: number of vdev currently handled by rproc 491 */ 492 struct rproc { 493 struct list_head node; 494 struct iommu_domain *domain; 495 const char *name; 496 const char *firmware; 497 void *priv; 498 struct rproc_ops *ops; 499 struct device dev; 500 atomic_t power; 501 unsigned int state; 502 struct mutex lock; 503 struct dentry *dbg_dir; 504 struct list_head traces; 505 int num_traces; 506 struct list_head carveouts; 507 struct list_head mappings; 508 u64 bootaddr; 509 struct list_head rvdevs; 510 struct list_head subdevs; 511 struct idr notifyids; 512 int index; 513 struct work_struct crash_handler; 514 unsigned int crash_cnt; 515 bool recovery_disabled; 516 int max_notifyid; 517 struct resource_table *table_ptr; 518 struct resource_table *cached_table; 519 size_t table_sz; 520 bool has_iommu; 521 bool auto_boot; 522 struct list_head dump_segments; 523 int nb_vdev; 524 u8 elf_class; 525 u16 elf_machine; 526 }; 527 528 /** 529 * struct rproc_subdev - subdevice tied to a remoteproc 530 * @node: list node related to the rproc subdevs list 531 * @prepare: prepare function, called before the rproc is started 532 * @start: start function, called after the rproc has been started 533 * @stop: stop function, called before the rproc is stopped; the @crashed 534 * parameter indicates if this originates from a recovery 535 * @unprepare: unprepare function, called after the rproc has been stopped 536 */ 537 struct rproc_subdev { 538 struct list_head node; 539 540 int (*prepare)(struct rproc_subdev *subdev); 541 int (*start)(struct rproc_subdev *subdev); 542 void (*stop)(struct rproc_subdev *subdev, bool crashed); 543 void (*unprepare)(struct rproc_subdev *subdev); 544 }; 545 546 /* we currently support only two vrings per rvdev */ 547 548 #define RVDEV_NUM_VRINGS 2 549 550 /** 551 * struct rproc_vring - remoteproc vring state 552 * @va: virtual address 553 * @len: length, in bytes 554 * @da: device address 555 * @align: vring alignment 556 * @notifyid: rproc-specific unique vring index 557 * @rvdev: remote vdev 558 * @vq: the virtqueue of this vring 559 */ 560 struct rproc_vring { 561 void *va; 562 int len; 563 u32 da; 564 u32 align; 565 int notifyid; 566 struct rproc_vdev *rvdev; 567 struct virtqueue *vq; 568 }; 569 570 /** 571 * struct rproc_vdev - remoteproc state for a supported virtio device 572 * @refcount: reference counter for the vdev and vring allocations 573 * @subdev: handle for registering the vdev as a rproc subdevice 574 * @id: virtio device id (as in virtio_ids.h) 575 * @node: list node 576 * @rproc: the rproc handle 577 * @vdev: the virio device 578 * @vring: the vrings for this vdev 579 * @rsc_offset: offset of the vdev's resource entry 580 * @index: vdev position versus other vdev declared in resource table 581 */ 582 struct rproc_vdev { 583 struct kref refcount; 584 585 struct rproc_subdev subdev; 586 struct device dev; 587 588 unsigned int id; 589 struct list_head node; 590 struct rproc *rproc; 591 struct rproc_vring vring[RVDEV_NUM_VRINGS]; 592 u32 rsc_offset; 593 u32 index; 594 }; 595 596 struct rproc *rproc_get_by_phandle(phandle phandle); 597 struct rproc *rproc_get_by_child(struct device *dev); 598 599 struct rproc *rproc_alloc(struct device *dev, const char *name, 600 const struct rproc_ops *ops, 601 const char *firmware, int len); 602 void rproc_put(struct rproc *rproc); 603 int rproc_add(struct rproc *rproc); 604 int rproc_del(struct rproc *rproc); 605 void rproc_free(struct rproc *rproc); 606 607 struct rproc *devm_rproc_alloc(struct device *dev, const char *name, 608 const struct rproc_ops *ops, 609 const char *firmware, int len); 610 int devm_rproc_add(struct device *dev, struct rproc *rproc); 611 612 void rproc_add_carveout(struct rproc *rproc, struct rproc_mem_entry *mem); 613 614 struct rproc_mem_entry * 615 rproc_mem_entry_init(struct device *dev, 616 void *va, dma_addr_t dma, size_t len, u32 da, 617 int (*alloc)(struct rproc *, struct rproc_mem_entry *), 618 int (*release)(struct rproc *, struct rproc_mem_entry *), 619 const char *name, ...); 620 621 struct rproc_mem_entry * 622 rproc_of_resm_mem_entry_init(struct device *dev, u32 of_resm_idx, size_t len, 623 u32 da, const char *name, ...); 624 625 int rproc_boot(struct rproc *rproc); 626 void rproc_shutdown(struct rproc *rproc); 627 void rproc_report_crash(struct rproc *rproc, enum rproc_crash_type type); 628 int rproc_coredump_add_segment(struct rproc *rproc, dma_addr_t da, size_t size); 629 int rproc_coredump_add_custom_segment(struct rproc *rproc, 630 dma_addr_t da, size_t size, 631 void (*dumpfn)(struct rproc *rproc, 632 struct rproc_dump_segment *segment, 633 void *dest), 634 void *priv); 635 int rproc_coredump_set_elf_info(struct rproc *rproc, u8 class, u16 machine); 636 637 static inline struct rproc_vdev *vdev_to_rvdev(struct virtio_device *vdev) 638 { 639 return container_of(vdev->dev.parent, struct rproc_vdev, dev); 640 } 641 642 static inline struct rproc *vdev_to_rproc(struct virtio_device *vdev) 643 { 644 struct rproc_vdev *rvdev = vdev_to_rvdev(vdev); 645 646 return rvdev->rproc; 647 } 648 649 void rproc_add_subdev(struct rproc *rproc, struct rproc_subdev *subdev); 650 651 void rproc_remove_subdev(struct rproc *rproc, struct rproc_subdev *subdev); 652 653 #endif /* REMOTEPROC_H */ 654