xref: /linux/drivers/watchdog/s3c2410_wdt.c (revision e5a52fd2b8cdb700b3c07b030e050a49ef3156b9)
1 // SPDX-License-Identifier: GPL-2.0-or-later
2 /*
3  * Copyright (c) 2004 Simtec Electronics
4  *	Ben Dooks <ben@simtec.co.uk>
5  *
6  * S3C2410 Watchdog Timer Support
7  *
8  * Based on, softdog.c by Alan Cox,
9  *     (c) Copyright 1996 Alan Cox <alan@lxorguk.ukuu.org.uk>
10  */
11 
12 #include <linux/module.h>
13 #include <linux/moduleparam.h>
14 #include <linux/types.h>
15 #include <linux/timer.h>
16 #include <linux/watchdog.h>
17 #include <linux/platform_device.h>
18 #include <linux/interrupt.h>
19 #include <linux/clk.h>
20 #include <linux/uaccess.h>
21 #include <linux/io.h>
22 #include <linux/cpufreq.h>
23 #include <linux/slab.h>
24 #include <linux/err.h>
25 #include <linux/of.h>
26 #include <linux/of_device.h>
27 #include <linux/mfd/syscon.h>
28 #include <linux/regmap.h>
29 #include <linux/delay.h>
30 
31 #define S3C2410_WTCON		0x00
32 #define S3C2410_WTDAT		0x04
33 #define S3C2410_WTCNT		0x08
34 #define S3C2410_WTCLRINT	0x0c
35 
36 #define S3C2410_WTCNT_MAXCNT	0xffff
37 
38 #define S3C2410_WTCON_RSTEN	(1 << 0)
39 #define S3C2410_WTCON_INTEN	(1 << 2)
40 #define S3C2410_WTCON_ENABLE	(1 << 5)
41 
42 #define S3C2410_WTCON_DIV16	(0 << 3)
43 #define S3C2410_WTCON_DIV32	(1 << 3)
44 #define S3C2410_WTCON_DIV64	(2 << 3)
45 #define S3C2410_WTCON_DIV128	(3 << 3)
46 
47 #define S3C2410_WTCON_MAXDIV	0x80
48 
49 #define S3C2410_WTCON_PRESCALE(x)	((x) << 8)
50 #define S3C2410_WTCON_PRESCALE_MASK	(0xff << 8)
51 #define S3C2410_WTCON_PRESCALE_MAX	0xff
52 
53 #define S3C2410_WATCHDOG_ATBOOT		(0)
54 #define S3C2410_WATCHDOG_DEFAULT_TIME	(15)
55 
56 #define EXYNOS5_RST_STAT_REG_OFFSET		0x0404
57 #define EXYNOS5_WDT_DISABLE_REG_OFFSET		0x0408
58 #define EXYNOS5_WDT_MASK_RESET_REG_OFFSET	0x040c
59 #define QUIRK_HAS_PMU_CONFIG			(1 << 0)
60 #define QUIRK_HAS_RST_STAT			(1 << 1)
61 #define QUIRK_HAS_WTCLRINT_REG			(1 << 2)
62 
63 /* These quirks require that we have a PMU register map */
64 #define QUIRKS_HAVE_PMUREG			(QUIRK_HAS_PMU_CONFIG | \
65 						 QUIRK_HAS_RST_STAT)
66 
67 static bool nowayout	= WATCHDOG_NOWAYOUT;
68 static int tmr_margin;
69 static int tmr_atboot	= S3C2410_WATCHDOG_ATBOOT;
70 static int soft_noboot;
71 
72 module_param(tmr_margin,  int, 0);
73 module_param(tmr_atboot,  int, 0);
74 module_param(nowayout,   bool, 0);
75 module_param(soft_noboot, int, 0);
76 
77 MODULE_PARM_DESC(tmr_margin, "Watchdog tmr_margin in seconds. (default="
78 		__MODULE_STRING(S3C2410_WATCHDOG_DEFAULT_TIME) ")");
79 MODULE_PARM_DESC(tmr_atboot,
80 		"Watchdog is started at boot time if set to 1, default="
81 			__MODULE_STRING(S3C2410_WATCHDOG_ATBOOT));
82 MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default="
83 			__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
84 MODULE_PARM_DESC(soft_noboot, "Watchdog action, set to 1 to ignore reboots, 0 to reboot (default 0)");
85 
86 /**
87  * struct s3c2410_wdt_variant - Per-variant config data
88  *
89  * @disable_reg: Offset in pmureg for the register that disables the watchdog
90  * timer reset functionality.
91  * @mask_reset_reg: Offset in pmureg for the register that masks the watchdog
92  * timer reset functionality.
93  * @mask_bit: Bit number for the watchdog timer in the disable register and the
94  * mask reset register.
95  * @rst_stat_reg: Offset in pmureg for the register that has the reset status.
96  * @rst_stat_bit: Bit number in the rst_stat register indicating a watchdog
97  * reset.
98  * @quirks: A bitfield of quirks.
99  */
100 
101 struct s3c2410_wdt_variant {
102 	int disable_reg;
103 	int mask_reset_reg;
104 	int mask_bit;
105 	int rst_stat_reg;
106 	int rst_stat_bit;
107 	u32 quirks;
108 };
109 
110 struct s3c2410_wdt {
111 	struct device		*dev;
112 	struct clk		*clock;
113 	void __iomem		*reg_base;
114 	unsigned int		count;
115 	spinlock_t		lock;
116 	unsigned long		wtcon_save;
117 	unsigned long		wtdat_save;
118 	struct watchdog_device	wdt_device;
119 	struct notifier_block	freq_transition;
120 	const struct s3c2410_wdt_variant *drv_data;
121 	struct regmap *pmureg;
122 };
123 
124 static const struct s3c2410_wdt_variant drv_data_s3c2410 = {
125 	.quirks = 0
126 };
127 
128 #ifdef CONFIG_OF
129 static const struct s3c2410_wdt_variant drv_data_s3c6410 = {
130 	.quirks = QUIRK_HAS_WTCLRINT_REG,
131 };
132 
133 static const struct s3c2410_wdt_variant drv_data_exynos5250  = {
134 	.disable_reg = EXYNOS5_WDT_DISABLE_REG_OFFSET,
135 	.mask_reset_reg = EXYNOS5_WDT_MASK_RESET_REG_OFFSET,
136 	.mask_bit = 20,
137 	.rst_stat_reg = EXYNOS5_RST_STAT_REG_OFFSET,
138 	.rst_stat_bit = 20,
139 	.quirks = QUIRK_HAS_PMU_CONFIG | QUIRK_HAS_RST_STAT \
140 		  | QUIRK_HAS_WTCLRINT_REG,
141 };
142 
143 static const struct s3c2410_wdt_variant drv_data_exynos5420 = {
144 	.disable_reg = EXYNOS5_WDT_DISABLE_REG_OFFSET,
145 	.mask_reset_reg = EXYNOS5_WDT_MASK_RESET_REG_OFFSET,
146 	.mask_bit = 0,
147 	.rst_stat_reg = EXYNOS5_RST_STAT_REG_OFFSET,
148 	.rst_stat_bit = 9,
149 	.quirks = QUIRK_HAS_PMU_CONFIG | QUIRK_HAS_RST_STAT \
150 		  | QUIRK_HAS_WTCLRINT_REG,
151 };
152 
153 static const struct s3c2410_wdt_variant drv_data_exynos7 = {
154 	.disable_reg = EXYNOS5_WDT_DISABLE_REG_OFFSET,
155 	.mask_reset_reg = EXYNOS5_WDT_MASK_RESET_REG_OFFSET,
156 	.mask_bit = 23,
157 	.rst_stat_reg = EXYNOS5_RST_STAT_REG_OFFSET,
158 	.rst_stat_bit = 23,	/* A57 WDTRESET */
159 	.quirks = QUIRK_HAS_PMU_CONFIG | QUIRK_HAS_RST_STAT \
160 		  | QUIRK_HAS_WTCLRINT_REG,
161 };
162 
163 static const struct of_device_id s3c2410_wdt_match[] = {
164 	{ .compatible = "samsung,s3c2410-wdt",
165 	  .data = &drv_data_s3c2410 },
166 	{ .compatible = "samsung,s3c6410-wdt",
167 	  .data = &drv_data_s3c6410 },
168 	{ .compatible = "samsung,exynos5250-wdt",
169 	  .data = &drv_data_exynos5250 },
170 	{ .compatible = "samsung,exynos5420-wdt",
171 	  .data = &drv_data_exynos5420 },
172 	{ .compatible = "samsung,exynos7-wdt",
173 	  .data = &drv_data_exynos7 },
174 	{},
175 };
176 MODULE_DEVICE_TABLE(of, s3c2410_wdt_match);
177 #endif
178 
179 static const struct platform_device_id s3c2410_wdt_ids[] = {
180 	{
181 		.name = "s3c2410-wdt",
182 		.driver_data = (unsigned long)&drv_data_s3c2410,
183 	},
184 	{}
185 };
186 MODULE_DEVICE_TABLE(platform, s3c2410_wdt_ids);
187 
188 /* functions */
189 
190 static inline unsigned int s3c2410wdt_max_timeout(struct clk *clock)
191 {
192 	unsigned long freq = clk_get_rate(clock);
193 
194 	return S3C2410_WTCNT_MAXCNT / (freq / (S3C2410_WTCON_PRESCALE_MAX + 1)
195 				       / S3C2410_WTCON_MAXDIV);
196 }
197 
198 static inline struct s3c2410_wdt *freq_to_wdt(struct notifier_block *nb)
199 {
200 	return container_of(nb, struct s3c2410_wdt, freq_transition);
201 }
202 
203 static int s3c2410wdt_mask_and_disable_reset(struct s3c2410_wdt *wdt, bool mask)
204 {
205 	int ret;
206 	u32 mask_val = 1 << wdt->drv_data->mask_bit;
207 	u32 val = 0;
208 
209 	/* No need to do anything if no PMU CONFIG needed */
210 	if (!(wdt->drv_data->quirks & QUIRK_HAS_PMU_CONFIG))
211 		return 0;
212 
213 	if (mask)
214 		val = mask_val;
215 
216 	ret = regmap_update_bits(wdt->pmureg,
217 			wdt->drv_data->disable_reg,
218 			mask_val, val);
219 	if (ret < 0)
220 		goto error;
221 
222 	ret = regmap_update_bits(wdt->pmureg,
223 			wdt->drv_data->mask_reset_reg,
224 			mask_val, val);
225  error:
226 	if (ret < 0)
227 		dev_err(wdt->dev, "failed to update reg(%d)\n", ret);
228 
229 	return ret;
230 }
231 
232 static int s3c2410wdt_keepalive(struct watchdog_device *wdd)
233 {
234 	struct s3c2410_wdt *wdt = watchdog_get_drvdata(wdd);
235 
236 	spin_lock(&wdt->lock);
237 	writel(wdt->count, wdt->reg_base + S3C2410_WTCNT);
238 	spin_unlock(&wdt->lock);
239 
240 	return 0;
241 }
242 
243 static void __s3c2410wdt_stop(struct s3c2410_wdt *wdt)
244 {
245 	unsigned long wtcon;
246 
247 	wtcon = readl(wdt->reg_base + S3C2410_WTCON);
248 	wtcon &= ~(S3C2410_WTCON_ENABLE | S3C2410_WTCON_RSTEN);
249 	writel(wtcon, wdt->reg_base + S3C2410_WTCON);
250 }
251 
252 static int s3c2410wdt_stop(struct watchdog_device *wdd)
253 {
254 	struct s3c2410_wdt *wdt = watchdog_get_drvdata(wdd);
255 
256 	spin_lock(&wdt->lock);
257 	__s3c2410wdt_stop(wdt);
258 	spin_unlock(&wdt->lock);
259 
260 	return 0;
261 }
262 
263 static int s3c2410wdt_start(struct watchdog_device *wdd)
264 {
265 	unsigned long wtcon;
266 	struct s3c2410_wdt *wdt = watchdog_get_drvdata(wdd);
267 
268 	spin_lock(&wdt->lock);
269 
270 	__s3c2410wdt_stop(wdt);
271 
272 	wtcon = readl(wdt->reg_base + S3C2410_WTCON);
273 	wtcon |= S3C2410_WTCON_ENABLE | S3C2410_WTCON_DIV128;
274 
275 	if (soft_noboot) {
276 		wtcon |= S3C2410_WTCON_INTEN;
277 		wtcon &= ~S3C2410_WTCON_RSTEN;
278 	} else {
279 		wtcon &= ~S3C2410_WTCON_INTEN;
280 		wtcon |= S3C2410_WTCON_RSTEN;
281 	}
282 
283 	dev_dbg(wdt->dev, "Starting watchdog: count=0x%08x, wtcon=%08lx\n",
284 		wdt->count, wtcon);
285 
286 	writel(wdt->count, wdt->reg_base + S3C2410_WTDAT);
287 	writel(wdt->count, wdt->reg_base + S3C2410_WTCNT);
288 	writel(wtcon, wdt->reg_base + S3C2410_WTCON);
289 	spin_unlock(&wdt->lock);
290 
291 	return 0;
292 }
293 
294 static inline int s3c2410wdt_is_running(struct s3c2410_wdt *wdt)
295 {
296 	return readl(wdt->reg_base + S3C2410_WTCON) & S3C2410_WTCON_ENABLE;
297 }
298 
299 static int s3c2410wdt_set_heartbeat(struct watchdog_device *wdd,
300 				    unsigned int timeout)
301 {
302 	struct s3c2410_wdt *wdt = watchdog_get_drvdata(wdd);
303 	unsigned long freq = clk_get_rate(wdt->clock);
304 	unsigned int count;
305 	unsigned int divisor = 1;
306 	unsigned long wtcon;
307 
308 	if (timeout < 1)
309 		return -EINVAL;
310 
311 	freq = DIV_ROUND_UP(freq, 128);
312 	count = timeout * freq;
313 
314 	dev_dbg(wdt->dev, "Heartbeat: count=%d, timeout=%d, freq=%lu\n",
315 		count, timeout, freq);
316 
317 	/* if the count is bigger than the watchdog register,
318 	   then work out what we need to do (and if) we can
319 	   actually make this value
320 	*/
321 
322 	if (count >= 0x10000) {
323 		divisor = DIV_ROUND_UP(count, 0xffff);
324 
325 		if (divisor > 0x100) {
326 			dev_err(wdt->dev, "timeout %d too big\n", timeout);
327 			return -EINVAL;
328 		}
329 	}
330 
331 	dev_dbg(wdt->dev, "Heartbeat: timeout=%d, divisor=%d, count=%d (%08x)\n",
332 		timeout, divisor, count, DIV_ROUND_UP(count, divisor));
333 
334 	count = DIV_ROUND_UP(count, divisor);
335 	wdt->count = count;
336 
337 	/* update the pre-scaler */
338 	wtcon = readl(wdt->reg_base + S3C2410_WTCON);
339 	wtcon &= ~S3C2410_WTCON_PRESCALE_MASK;
340 	wtcon |= S3C2410_WTCON_PRESCALE(divisor-1);
341 
342 	writel(count, wdt->reg_base + S3C2410_WTDAT);
343 	writel(wtcon, wdt->reg_base + S3C2410_WTCON);
344 
345 	wdd->timeout = (count * divisor) / freq;
346 
347 	return 0;
348 }
349 
350 static int s3c2410wdt_restart(struct watchdog_device *wdd, unsigned long action,
351 			      void *data)
352 {
353 	struct s3c2410_wdt *wdt = watchdog_get_drvdata(wdd);
354 	void __iomem *wdt_base = wdt->reg_base;
355 
356 	/* disable watchdog, to be safe  */
357 	writel(0, wdt_base + S3C2410_WTCON);
358 
359 	/* put initial values into count and data */
360 	writel(0x80, wdt_base + S3C2410_WTCNT);
361 	writel(0x80, wdt_base + S3C2410_WTDAT);
362 
363 	/* set the watchdog to go and reset... */
364 	writel(S3C2410_WTCON_ENABLE | S3C2410_WTCON_DIV16 |
365 		S3C2410_WTCON_RSTEN | S3C2410_WTCON_PRESCALE(0x20),
366 		wdt_base + S3C2410_WTCON);
367 
368 	/* wait for reset to assert... */
369 	mdelay(500);
370 
371 	return 0;
372 }
373 
374 #define OPTIONS (WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE)
375 
376 static const struct watchdog_info s3c2410_wdt_ident = {
377 	.options          =     OPTIONS,
378 	.firmware_version =	0,
379 	.identity         =	"S3C2410 Watchdog",
380 };
381 
382 static const struct watchdog_ops s3c2410wdt_ops = {
383 	.owner = THIS_MODULE,
384 	.start = s3c2410wdt_start,
385 	.stop = s3c2410wdt_stop,
386 	.ping = s3c2410wdt_keepalive,
387 	.set_timeout = s3c2410wdt_set_heartbeat,
388 	.restart = s3c2410wdt_restart,
389 };
390 
391 static const struct watchdog_device s3c2410_wdd = {
392 	.info = &s3c2410_wdt_ident,
393 	.ops = &s3c2410wdt_ops,
394 	.timeout = S3C2410_WATCHDOG_DEFAULT_TIME,
395 };
396 
397 /* interrupt handler code */
398 
399 static irqreturn_t s3c2410wdt_irq(int irqno, void *param)
400 {
401 	struct s3c2410_wdt *wdt = platform_get_drvdata(param);
402 
403 	dev_info(wdt->dev, "watchdog timer expired (irq)\n");
404 
405 	s3c2410wdt_keepalive(&wdt->wdt_device);
406 
407 	if (wdt->drv_data->quirks & QUIRK_HAS_WTCLRINT_REG)
408 		writel(0x1, wdt->reg_base + S3C2410_WTCLRINT);
409 
410 	return IRQ_HANDLED;
411 }
412 
413 #ifdef CONFIG_ARM_S3C24XX_CPUFREQ
414 
415 static int s3c2410wdt_cpufreq_transition(struct notifier_block *nb,
416 					  unsigned long val, void *data)
417 {
418 	int ret;
419 	struct s3c2410_wdt *wdt = freq_to_wdt(nb);
420 
421 	if (!s3c2410wdt_is_running(wdt))
422 		goto done;
423 
424 	if (val == CPUFREQ_PRECHANGE) {
425 		/* To ensure that over the change we don't cause the
426 		 * watchdog to trigger, we perform an keep-alive if
427 		 * the watchdog is running.
428 		 */
429 
430 		s3c2410wdt_keepalive(&wdt->wdt_device);
431 	} else if (val == CPUFREQ_POSTCHANGE) {
432 		s3c2410wdt_stop(&wdt->wdt_device);
433 
434 		ret = s3c2410wdt_set_heartbeat(&wdt->wdt_device,
435 						wdt->wdt_device.timeout);
436 
437 		if (ret >= 0)
438 			s3c2410wdt_start(&wdt->wdt_device);
439 		else
440 			goto err;
441 	}
442 
443 done:
444 	return 0;
445 
446  err:
447 	dev_err(wdt->dev, "cannot set new value for timeout %d\n",
448 				wdt->wdt_device.timeout);
449 	return ret;
450 }
451 
452 static inline int s3c2410wdt_cpufreq_register(struct s3c2410_wdt *wdt)
453 {
454 	wdt->freq_transition.notifier_call = s3c2410wdt_cpufreq_transition;
455 
456 	return cpufreq_register_notifier(&wdt->freq_transition,
457 					 CPUFREQ_TRANSITION_NOTIFIER);
458 }
459 
460 static inline void s3c2410wdt_cpufreq_deregister(struct s3c2410_wdt *wdt)
461 {
462 	wdt->freq_transition.notifier_call = s3c2410wdt_cpufreq_transition;
463 
464 	cpufreq_unregister_notifier(&wdt->freq_transition,
465 				    CPUFREQ_TRANSITION_NOTIFIER);
466 }
467 
468 #else
469 
470 static inline int s3c2410wdt_cpufreq_register(struct s3c2410_wdt *wdt)
471 {
472 	return 0;
473 }
474 
475 static inline void s3c2410wdt_cpufreq_deregister(struct s3c2410_wdt *wdt)
476 {
477 }
478 #endif
479 
480 static inline unsigned int s3c2410wdt_get_bootstatus(struct s3c2410_wdt *wdt)
481 {
482 	unsigned int rst_stat;
483 	int ret;
484 
485 	if (!(wdt->drv_data->quirks & QUIRK_HAS_RST_STAT))
486 		return 0;
487 
488 	ret = regmap_read(wdt->pmureg, wdt->drv_data->rst_stat_reg, &rst_stat);
489 	if (ret)
490 		dev_warn(wdt->dev, "Couldn't get RST_STAT register\n");
491 	else if (rst_stat & BIT(wdt->drv_data->rst_stat_bit))
492 		return WDIOF_CARDRESET;
493 
494 	return 0;
495 }
496 
497 static inline const struct s3c2410_wdt_variant *
498 s3c2410_get_wdt_drv_data(struct platform_device *pdev)
499 {
500 	const struct s3c2410_wdt_variant *variant;
501 
502 	variant = of_device_get_match_data(&pdev->dev);
503 	if (!variant) {
504 		/* Device matched by platform_device_id */
505 		variant = (struct s3c2410_wdt_variant *)
506 			   platform_get_device_id(pdev)->driver_data;
507 	}
508 
509 	return variant;
510 }
511 
512 static int s3c2410wdt_probe(struct platform_device *pdev)
513 {
514 	struct device *dev = &pdev->dev;
515 	struct s3c2410_wdt *wdt;
516 	struct resource *wdt_irq;
517 	unsigned int wtcon;
518 	int started = 0;
519 	int ret;
520 
521 	wdt = devm_kzalloc(dev, sizeof(*wdt), GFP_KERNEL);
522 	if (!wdt)
523 		return -ENOMEM;
524 
525 	wdt->dev = dev;
526 	spin_lock_init(&wdt->lock);
527 	wdt->wdt_device = s3c2410_wdd;
528 
529 	wdt->drv_data = s3c2410_get_wdt_drv_data(pdev);
530 	if (wdt->drv_data->quirks & QUIRKS_HAVE_PMUREG) {
531 		wdt->pmureg = syscon_regmap_lookup_by_phandle(dev->of_node,
532 						"samsung,syscon-phandle");
533 		if (IS_ERR(wdt->pmureg)) {
534 			dev_err(dev, "syscon regmap lookup failed.\n");
535 			return PTR_ERR(wdt->pmureg);
536 		}
537 	}
538 
539 	wdt_irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
540 	if (wdt_irq == NULL) {
541 		dev_err(dev, "no irq resource specified\n");
542 		ret = -ENOENT;
543 		goto err;
544 	}
545 
546 	/* get the memory region for the watchdog timer */
547 	wdt->reg_base = devm_platform_ioremap_resource(pdev, 0);
548 	if (IS_ERR(wdt->reg_base)) {
549 		ret = PTR_ERR(wdt->reg_base);
550 		goto err;
551 	}
552 
553 	wdt->clock = devm_clk_get(dev, "watchdog");
554 	if (IS_ERR(wdt->clock)) {
555 		dev_err(dev, "failed to find watchdog clock source\n");
556 		ret = PTR_ERR(wdt->clock);
557 		goto err;
558 	}
559 
560 	ret = clk_prepare_enable(wdt->clock);
561 	if (ret < 0) {
562 		dev_err(dev, "failed to enable clock\n");
563 		return ret;
564 	}
565 
566 	wdt->wdt_device.min_timeout = 1;
567 	wdt->wdt_device.max_timeout = s3c2410wdt_max_timeout(wdt->clock);
568 
569 	ret = s3c2410wdt_cpufreq_register(wdt);
570 	if (ret < 0) {
571 		dev_err(dev, "failed to register cpufreq\n");
572 		goto err_clk;
573 	}
574 
575 	watchdog_set_drvdata(&wdt->wdt_device, wdt);
576 
577 	/* see if we can actually set the requested timer margin, and if
578 	 * not, try the default value */
579 
580 	watchdog_init_timeout(&wdt->wdt_device, tmr_margin, dev);
581 	ret = s3c2410wdt_set_heartbeat(&wdt->wdt_device,
582 					wdt->wdt_device.timeout);
583 	if (ret) {
584 		started = s3c2410wdt_set_heartbeat(&wdt->wdt_device,
585 					S3C2410_WATCHDOG_DEFAULT_TIME);
586 
587 		if (started == 0)
588 			dev_info(dev,
589 				 "tmr_margin value out of range, default %d used\n",
590 				 S3C2410_WATCHDOG_DEFAULT_TIME);
591 		else
592 			dev_info(dev, "default timer value is out of range, cannot start\n");
593 	}
594 
595 	ret = devm_request_irq(dev, wdt_irq->start, s3c2410wdt_irq, 0,
596 				pdev->name, pdev);
597 	if (ret != 0) {
598 		dev_err(dev, "failed to install irq (%d)\n", ret);
599 		goto err_cpufreq;
600 	}
601 
602 	watchdog_set_nowayout(&wdt->wdt_device, nowayout);
603 	watchdog_set_restart_priority(&wdt->wdt_device, 128);
604 
605 	wdt->wdt_device.bootstatus = s3c2410wdt_get_bootstatus(wdt);
606 	wdt->wdt_device.parent = dev;
607 
608 	ret = watchdog_register_device(&wdt->wdt_device);
609 	if (ret)
610 		goto err_cpufreq;
611 
612 	ret = s3c2410wdt_mask_and_disable_reset(wdt, false);
613 	if (ret < 0)
614 		goto err_unregister;
615 
616 	if (tmr_atboot && started == 0) {
617 		dev_info(dev, "starting watchdog timer\n");
618 		s3c2410wdt_start(&wdt->wdt_device);
619 	} else if (!tmr_atboot) {
620 		/* if we're not enabling the watchdog, then ensure it is
621 		 * disabled if it has been left running from the bootloader
622 		 * or other source */
623 
624 		s3c2410wdt_stop(&wdt->wdt_device);
625 	}
626 
627 	platform_set_drvdata(pdev, wdt);
628 
629 	/* print out a statement of readiness */
630 
631 	wtcon = readl(wdt->reg_base + S3C2410_WTCON);
632 
633 	dev_info(dev, "watchdog %sactive, reset %sabled, irq %sabled\n",
634 		 (wtcon & S3C2410_WTCON_ENABLE) ?  "" : "in",
635 		 (wtcon & S3C2410_WTCON_RSTEN) ? "en" : "dis",
636 		 (wtcon & S3C2410_WTCON_INTEN) ? "en" : "dis");
637 
638 	return 0;
639 
640  err_unregister:
641 	watchdog_unregister_device(&wdt->wdt_device);
642 
643  err_cpufreq:
644 	s3c2410wdt_cpufreq_deregister(wdt);
645 
646  err_clk:
647 	clk_disable_unprepare(wdt->clock);
648 
649  err:
650 	return ret;
651 }
652 
653 static int s3c2410wdt_remove(struct platform_device *dev)
654 {
655 	int ret;
656 	struct s3c2410_wdt *wdt = platform_get_drvdata(dev);
657 
658 	ret = s3c2410wdt_mask_and_disable_reset(wdt, true);
659 	if (ret < 0)
660 		return ret;
661 
662 	watchdog_unregister_device(&wdt->wdt_device);
663 
664 	s3c2410wdt_cpufreq_deregister(wdt);
665 
666 	clk_disable_unprepare(wdt->clock);
667 
668 	return 0;
669 }
670 
671 static void s3c2410wdt_shutdown(struct platform_device *dev)
672 {
673 	struct s3c2410_wdt *wdt = platform_get_drvdata(dev);
674 
675 	s3c2410wdt_mask_and_disable_reset(wdt, true);
676 
677 	s3c2410wdt_stop(&wdt->wdt_device);
678 }
679 
680 #ifdef CONFIG_PM_SLEEP
681 
682 static int s3c2410wdt_suspend(struct device *dev)
683 {
684 	int ret;
685 	struct s3c2410_wdt *wdt = dev_get_drvdata(dev);
686 
687 	/* Save watchdog state, and turn it off. */
688 	wdt->wtcon_save = readl(wdt->reg_base + S3C2410_WTCON);
689 	wdt->wtdat_save = readl(wdt->reg_base + S3C2410_WTDAT);
690 
691 	ret = s3c2410wdt_mask_and_disable_reset(wdt, true);
692 	if (ret < 0)
693 		return ret;
694 
695 	/* Note that WTCNT doesn't need to be saved. */
696 	s3c2410wdt_stop(&wdt->wdt_device);
697 
698 	return 0;
699 }
700 
701 static int s3c2410wdt_resume(struct device *dev)
702 {
703 	int ret;
704 	struct s3c2410_wdt *wdt = dev_get_drvdata(dev);
705 
706 	/* Restore watchdog state. */
707 	writel(wdt->wtdat_save, wdt->reg_base + S3C2410_WTDAT);
708 	writel(wdt->wtdat_save, wdt->reg_base + S3C2410_WTCNT);/* Reset count */
709 	writel(wdt->wtcon_save, wdt->reg_base + S3C2410_WTCON);
710 
711 	ret = s3c2410wdt_mask_and_disable_reset(wdt, false);
712 	if (ret < 0)
713 		return ret;
714 
715 	dev_info(dev, "watchdog %sabled\n",
716 		(wdt->wtcon_save & S3C2410_WTCON_ENABLE) ? "en" : "dis");
717 
718 	return 0;
719 }
720 #endif
721 
722 static SIMPLE_DEV_PM_OPS(s3c2410wdt_pm_ops, s3c2410wdt_suspend,
723 			s3c2410wdt_resume);
724 
725 static struct platform_driver s3c2410wdt_driver = {
726 	.probe		= s3c2410wdt_probe,
727 	.remove		= s3c2410wdt_remove,
728 	.shutdown	= s3c2410wdt_shutdown,
729 	.id_table	= s3c2410_wdt_ids,
730 	.driver		= {
731 		.name	= "s3c2410-wdt",
732 		.pm	= &s3c2410wdt_pm_ops,
733 		.of_match_table	= of_match_ptr(s3c2410_wdt_match),
734 	},
735 };
736 
737 module_platform_driver(s3c2410wdt_driver);
738 
739 MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>, Dimitry Andric <dimitry.andric@tomtom.com>");
740 MODULE_DESCRIPTION("S3C2410 Watchdog Device Driver");
741 MODULE_LICENSE("GPL");
742