1 // SPDX-License-Identifier: GPL-2.0+ 2 /* 3 * Copyright (C) 2003-2008 Takahiro Hirofuchi 4 * Copyright (C) 2015-2016 Nobuo Iwata 5 */ 6 7 #include <linux/init.h> 8 #include <linux/file.h> 9 #include <linux/kernel.h> 10 #include <linux/kthread.h> 11 #include <linux/module.h> 12 #include <linux/platform_device.h> 13 #include <linux/slab.h> 14 15 #include "usbip_common.h" 16 #include "vhci.h" 17 18 #define DRIVER_AUTHOR "Takahiro Hirofuchi" 19 #define DRIVER_DESC "USB/IP 'Virtual' Host Controller (VHCI) Driver" 20 21 /* 22 * TODO 23 * - update root hub emulation 24 * - move the emulation code to userland ? 25 * porting to other operating systems 26 * minimize kernel code 27 * - add suspend/resume code 28 * - clean up everything 29 */ 30 31 /* See usb gadget dummy hcd */ 32 33 static int vhci_hub_status(struct usb_hcd *hcd, char *buff); 34 static int vhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, 35 u16 wIndex, char *buff, u16 wLength); 36 static int vhci_urb_enqueue(struct usb_hcd *hcd, struct urb *urb, 37 gfp_t mem_flags); 38 static int vhci_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status); 39 static int vhci_start(struct usb_hcd *vhci_hcd); 40 static void vhci_stop(struct usb_hcd *hcd); 41 static int vhci_get_frame_number(struct usb_hcd *hcd); 42 43 static const char driver_name[] = "vhci_hcd"; 44 static const char driver_desc[] = "USB/IP Virtual Host Controller"; 45 46 int vhci_num_controllers = VHCI_NR_HCS; 47 struct vhci *vhcis; 48 49 static const char * const bit_desc[] = { 50 "CONNECTION", /*0*/ 51 "ENABLE", /*1*/ 52 "SUSPEND", /*2*/ 53 "OVER_CURRENT", /*3*/ 54 "RESET", /*4*/ 55 "L1", /*5*/ 56 "R6", /*6*/ 57 "R7", /*7*/ 58 "POWER", /*8*/ 59 "LOWSPEED", /*9*/ 60 "HIGHSPEED", /*10*/ 61 "PORT_TEST", /*11*/ 62 "INDICATOR", /*12*/ 63 "R13", /*13*/ 64 "R14", /*14*/ 65 "R15", /*15*/ 66 "C_CONNECTION", /*16*/ 67 "C_ENABLE", /*17*/ 68 "C_SUSPEND", /*18*/ 69 "C_OVER_CURRENT", /*19*/ 70 "C_RESET", /*20*/ 71 "C_L1", /*21*/ 72 "R22", /*22*/ 73 "R23", /*23*/ 74 "R24", /*24*/ 75 "R25", /*25*/ 76 "R26", /*26*/ 77 "R27", /*27*/ 78 "R28", /*28*/ 79 "R29", /*29*/ 80 "R30", /*30*/ 81 "R31", /*31*/ 82 }; 83 84 static const char * const bit_desc_ss[] = { 85 "CONNECTION", /*0*/ 86 "ENABLE", /*1*/ 87 "SUSPEND", /*2*/ 88 "OVER_CURRENT", /*3*/ 89 "RESET", /*4*/ 90 "L1", /*5*/ 91 "R6", /*6*/ 92 "R7", /*7*/ 93 "R8", /*8*/ 94 "POWER", /*9*/ 95 "HIGHSPEED", /*10*/ 96 "PORT_TEST", /*11*/ 97 "INDICATOR", /*12*/ 98 "R13", /*13*/ 99 "R14", /*14*/ 100 "R15", /*15*/ 101 "C_CONNECTION", /*16*/ 102 "C_ENABLE", /*17*/ 103 "C_SUSPEND", /*18*/ 104 "C_OVER_CURRENT", /*19*/ 105 "C_RESET", /*20*/ 106 "C_BH_RESET", /*21*/ 107 "C_LINK_STATE", /*22*/ 108 "C_CONFIG_ERROR", /*23*/ 109 "R24", /*24*/ 110 "R25", /*25*/ 111 "R26", /*26*/ 112 "R27", /*27*/ 113 "R28", /*28*/ 114 "R29", /*29*/ 115 "R30", /*30*/ 116 "R31", /*31*/ 117 }; 118 119 static void dump_port_status_diff(u32 prev_status, u32 new_status, bool usb3) 120 { 121 int i = 0; 122 u32 bit = 1; 123 const char * const *desc = bit_desc; 124 125 if (usb3) 126 desc = bit_desc_ss; 127 128 pr_debug("status prev -> new: %08x -> %08x\n", prev_status, new_status); 129 while (bit) { 130 u32 prev = prev_status & bit; 131 u32 new = new_status & bit; 132 char change; 133 134 if (!prev && new) 135 change = '+'; 136 else if (prev && !new) 137 change = '-'; 138 else 139 change = ' '; 140 141 if (prev || new) { 142 pr_debug(" %c%s\n", change, desc[i]); 143 144 if (bit == 1) /* USB_PORT_STAT_CONNECTION */ 145 pr_debug(" %c%s\n", change, "USB_PORT_STAT_SPEED_5GBPS"); 146 } 147 bit <<= 1; 148 i++; 149 } 150 pr_debug("\n"); 151 } 152 153 void rh_port_connect(struct vhci_device *vdev, enum usb_device_speed speed) 154 { 155 struct vhci_hcd *vhci_hcd = vdev_to_vhci_hcd(vdev); 156 struct vhci *vhci = vhci_hcd->vhci; 157 int rhport = vdev->rhport; 158 u32 status; 159 unsigned long flags; 160 161 usbip_dbg_vhci_rh("rh_port_connect %d\n", rhport); 162 163 spin_lock_irqsave(&vhci->lock, flags); 164 165 status = vhci_hcd->port_status[rhport]; 166 167 status |= USB_PORT_STAT_CONNECTION | (1 << USB_PORT_FEAT_C_CONNECTION); 168 169 switch (speed) { 170 case USB_SPEED_HIGH: 171 status |= USB_PORT_STAT_HIGH_SPEED; 172 break; 173 case USB_SPEED_LOW: 174 status |= USB_PORT_STAT_LOW_SPEED; 175 break; 176 default: 177 break; 178 } 179 180 vhci_hcd->port_status[rhport] = status; 181 182 spin_unlock_irqrestore(&vhci->lock, flags); 183 184 usb_hcd_poll_rh_status(vhci_hcd_to_hcd(vhci_hcd)); 185 } 186 187 static void rh_port_disconnect(struct vhci_device *vdev) 188 { 189 struct vhci_hcd *vhci_hcd = vdev_to_vhci_hcd(vdev); 190 struct vhci *vhci = vhci_hcd->vhci; 191 int rhport = vdev->rhport; 192 u32 status; 193 unsigned long flags; 194 195 usbip_dbg_vhci_rh("rh_port_disconnect %d\n", rhport); 196 197 spin_lock_irqsave(&vhci->lock, flags); 198 199 status = vhci_hcd->port_status[rhport]; 200 201 status &= ~USB_PORT_STAT_CONNECTION; 202 status |= (1 << USB_PORT_FEAT_C_CONNECTION); 203 204 vhci_hcd->port_status[rhport] = status; 205 206 spin_unlock_irqrestore(&vhci->lock, flags); 207 usb_hcd_poll_rh_status(vhci_hcd_to_hcd(vhci_hcd)); 208 } 209 210 #define PORT_C_MASK \ 211 ((USB_PORT_STAT_C_CONNECTION \ 212 | USB_PORT_STAT_C_ENABLE \ 213 | USB_PORT_STAT_C_SUSPEND \ 214 | USB_PORT_STAT_C_OVERCURRENT \ 215 | USB_PORT_STAT_C_RESET) << 16) 216 217 /* 218 * Returns 0 if the status hasn't changed, or the number of bytes in buf. 219 * Ports are 0-indexed from the HCD point of view, 220 * and 1-indexed from the USB core pointer of view. 221 * 222 * @buf: a bitmap to show which port status has been changed. 223 * bit 0: reserved 224 * bit 1: the status of port 0 has been changed. 225 * bit 2: the status of port 1 has been changed. 226 * ... 227 */ 228 static int vhci_hub_status(struct usb_hcd *hcd, char *buf) 229 { 230 struct vhci_hcd *vhci_hcd = hcd_to_vhci_hcd(hcd); 231 struct vhci *vhci = vhci_hcd->vhci; 232 int retval = DIV_ROUND_UP(VHCI_HC_PORTS + 1, 8); 233 int rhport; 234 int changed = 0; 235 unsigned long flags; 236 237 memset(buf, 0, retval); 238 239 spin_lock_irqsave(&vhci->lock, flags); 240 if (!HCD_HW_ACCESSIBLE(hcd)) { 241 usbip_dbg_vhci_rh("hw accessible flag not on?\n"); 242 goto done; 243 } 244 245 /* check pseudo status register for each port */ 246 for (rhport = 0; rhport < VHCI_HC_PORTS; rhport++) { 247 if ((vhci_hcd->port_status[rhport] & PORT_C_MASK)) { 248 /* The status of a port has been changed, */ 249 usbip_dbg_vhci_rh("port %d status changed\n", rhport); 250 251 buf[(rhport + 1) / 8] |= 1 << (rhport + 1) % 8; 252 changed = 1; 253 } 254 } 255 256 if ((hcd->state == HC_STATE_SUSPENDED) && (changed == 1)) 257 usb_hcd_resume_root_hub(hcd); 258 259 done: 260 spin_unlock_irqrestore(&vhci->lock, flags); 261 return changed ? retval : 0; 262 } 263 264 /* usb 3.0 root hub device descriptor */ 265 static struct { 266 struct usb_bos_descriptor bos; 267 struct usb_ss_cap_descriptor ss_cap; 268 } __packed usb3_bos_desc = { 269 270 .bos = { 271 .bLength = USB_DT_BOS_SIZE, 272 .bDescriptorType = USB_DT_BOS, 273 .wTotalLength = cpu_to_le16(sizeof(usb3_bos_desc)), 274 .bNumDeviceCaps = 1, 275 }, 276 .ss_cap = { 277 .bLength = USB_DT_USB_SS_CAP_SIZE, 278 .bDescriptorType = USB_DT_DEVICE_CAPABILITY, 279 .bDevCapabilityType = USB_SS_CAP_TYPE, 280 .wSpeedSupported = cpu_to_le16(USB_5GBPS_OPERATION), 281 .bFunctionalitySupport = ilog2(USB_5GBPS_OPERATION), 282 }, 283 }; 284 285 static inline void 286 ss_hub_descriptor(struct usb_hub_descriptor *desc) 287 { 288 memset(desc, 0, sizeof *desc); 289 desc->bDescriptorType = USB_DT_SS_HUB; 290 desc->bDescLength = 12; 291 desc->wHubCharacteristics = cpu_to_le16( 292 HUB_CHAR_INDV_PORT_LPSM | HUB_CHAR_COMMON_OCPM); 293 desc->bNbrPorts = VHCI_HC_PORTS; 294 desc->u.ss.bHubHdrDecLat = 0x04; /* Worst case: 0.4 micro sec*/ 295 desc->u.ss.DeviceRemovable = 0xffff; 296 } 297 298 static inline void hub_descriptor(struct usb_hub_descriptor *desc) 299 { 300 int width; 301 302 memset(desc, 0, sizeof(*desc)); 303 desc->bDescriptorType = USB_DT_HUB; 304 desc->wHubCharacteristics = cpu_to_le16( 305 HUB_CHAR_INDV_PORT_LPSM | HUB_CHAR_COMMON_OCPM); 306 307 desc->bNbrPorts = VHCI_HC_PORTS; 308 BUILD_BUG_ON(VHCI_HC_PORTS > USB_MAXCHILDREN); 309 width = desc->bNbrPorts / 8 + 1; 310 desc->bDescLength = USB_DT_HUB_NONVAR_SIZE + 2 * width; 311 memset(&desc->u.hs.DeviceRemovable[0], 0, width); 312 memset(&desc->u.hs.DeviceRemovable[width], 0xff, width); 313 } 314 315 static int vhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, 316 u16 wIndex, char *buf, u16 wLength) 317 { 318 struct vhci_hcd *vhci_hcd; 319 struct vhci *vhci; 320 int retval = 0; 321 int rhport = -1; 322 unsigned long flags; 323 bool invalid_rhport = false; 324 325 u32 prev_port_status[VHCI_HC_PORTS]; 326 327 if (!HCD_HW_ACCESSIBLE(hcd)) 328 return -ETIMEDOUT; 329 330 /* 331 * NOTE: 332 * wIndex (bits 0-7) shows the port number and begins from 1? 333 */ 334 wIndex = ((__u8)(wIndex & 0x00ff)); 335 usbip_dbg_vhci_rh("typeReq %x wValue %x wIndex %x\n", typeReq, wValue, 336 wIndex); 337 338 /* 339 * wIndex can be 0 for some request types (typeReq). rhport is 340 * in valid range when wIndex >= 1 and < VHCI_HC_PORTS. 341 * 342 * Reference port_status[] only with valid rhport when 343 * invalid_rhport is false. 344 */ 345 if (wIndex < 1 || wIndex > VHCI_HC_PORTS) { 346 invalid_rhport = true; 347 if (wIndex > VHCI_HC_PORTS) 348 pr_err("invalid port number %d\n", wIndex); 349 } else 350 rhport = wIndex - 1; 351 352 vhci_hcd = hcd_to_vhci_hcd(hcd); 353 vhci = vhci_hcd->vhci; 354 355 spin_lock_irqsave(&vhci->lock, flags); 356 357 /* store old status and compare now and old later */ 358 if (usbip_dbg_flag_vhci_rh) { 359 if (!invalid_rhport) 360 memcpy(prev_port_status, vhci_hcd->port_status, 361 sizeof(prev_port_status)); 362 } 363 364 switch (typeReq) { 365 case ClearHubFeature: 366 usbip_dbg_vhci_rh(" ClearHubFeature\n"); 367 break; 368 case ClearPortFeature: 369 if (invalid_rhport) { 370 pr_err("invalid port number %d\n", wIndex); 371 goto error; 372 } 373 switch (wValue) { 374 case USB_PORT_FEAT_SUSPEND: 375 if (hcd->speed == HCD_USB3) { 376 pr_err(" ClearPortFeature: USB_PORT_FEAT_SUSPEND req not " 377 "supported for USB 3.0 roothub\n"); 378 goto error; 379 } 380 usbip_dbg_vhci_rh( 381 " ClearPortFeature: USB_PORT_FEAT_SUSPEND\n"); 382 if (vhci_hcd->port_status[rhport] & USB_PORT_STAT_SUSPEND) { 383 /* 20msec signaling */ 384 vhci_hcd->resuming = 1; 385 vhci_hcd->re_timeout = jiffies + msecs_to_jiffies(20); 386 } 387 break; 388 case USB_PORT_FEAT_POWER: 389 usbip_dbg_vhci_rh( 390 " ClearPortFeature: USB_PORT_FEAT_POWER\n"); 391 if (hcd->speed == HCD_USB3) 392 vhci_hcd->port_status[rhport] &= ~USB_SS_PORT_STAT_POWER; 393 else 394 vhci_hcd->port_status[rhport] &= ~USB_PORT_STAT_POWER; 395 break; 396 default: 397 usbip_dbg_vhci_rh(" ClearPortFeature: default %x\n", 398 wValue); 399 if (wValue >= 32) 400 goto error; 401 vhci_hcd->port_status[rhport] &= ~(1 << wValue); 402 break; 403 } 404 break; 405 case GetHubDescriptor: 406 usbip_dbg_vhci_rh(" GetHubDescriptor\n"); 407 if (hcd->speed == HCD_USB3 && 408 (wLength < USB_DT_SS_HUB_SIZE || 409 wValue != (USB_DT_SS_HUB << 8))) { 410 pr_err("Wrong hub descriptor type for USB 3.0 roothub.\n"); 411 goto error; 412 } 413 if (hcd->speed == HCD_USB3) 414 ss_hub_descriptor((struct usb_hub_descriptor *) buf); 415 else 416 hub_descriptor((struct usb_hub_descriptor *) buf); 417 break; 418 case DeviceRequest | USB_REQ_GET_DESCRIPTOR: 419 if (hcd->speed != HCD_USB3) 420 goto error; 421 422 if ((wValue >> 8) != USB_DT_BOS) 423 goto error; 424 425 memcpy(buf, &usb3_bos_desc, sizeof(usb3_bos_desc)); 426 retval = sizeof(usb3_bos_desc); 427 break; 428 case GetHubStatus: 429 usbip_dbg_vhci_rh(" GetHubStatus\n"); 430 *(__le32 *) buf = cpu_to_le32(0); 431 break; 432 case GetPortStatus: 433 usbip_dbg_vhci_rh(" GetPortStatus port %x\n", wIndex); 434 if (invalid_rhport) { 435 pr_err("invalid port number %d\n", wIndex); 436 retval = -EPIPE; 437 goto error; 438 } 439 440 /* we do not care about resume. */ 441 442 /* whoever resets or resumes must GetPortStatus to 443 * complete it!! 444 */ 445 if (vhci_hcd->resuming && time_after(jiffies, vhci_hcd->re_timeout)) { 446 vhci_hcd->port_status[rhport] |= (1 << USB_PORT_FEAT_C_SUSPEND); 447 vhci_hcd->port_status[rhport] &= ~(1 << USB_PORT_FEAT_SUSPEND); 448 vhci_hcd->resuming = 0; 449 vhci_hcd->re_timeout = 0; 450 } 451 452 if ((vhci_hcd->port_status[rhport] & (1 << USB_PORT_FEAT_RESET)) != 453 0 && time_after(jiffies, vhci_hcd->re_timeout)) { 454 vhci_hcd->port_status[rhport] |= (1 << USB_PORT_FEAT_C_RESET); 455 vhci_hcd->port_status[rhport] &= ~(1 << USB_PORT_FEAT_RESET); 456 vhci_hcd->re_timeout = 0; 457 458 if (vhci_hcd->vdev[rhport].ud.status == 459 VDEV_ST_NOTASSIGNED) { 460 usbip_dbg_vhci_rh( 461 " enable rhport %d (status %u)\n", 462 rhport, 463 vhci_hcd->vdev[rhport].ud.status); 464 vhci_hcd->port_status[rhport] |= 465 USB_PORT_STAT_ENABLE; 466 } 467 468 if (hcd->speed < HCD_USB3) { 469 switch (vhci_hcd->vdev[rhport].speed) { 470 case USB_SPEED_HIGH: 471 vhci_hcd->port_status[rhport] |= 472 USB_PORT_STAT_HIGH_SPEED; 473 break; 474 case USB_SPEED_LOW: 475 vhci_hcd->port_status[rhport] |= 476 USB_PORT_STAT_LOW_SPEED; 477 break; 478 default: 479 pr_err("vhci_device speed not set\n"); 480 break; 481 } 482 } 483 } 484 ((__le16 *) buf)[0] = cpu_to_le16(vhci_hcd->port_status[rhport]); 485 ((__le16 *) buf)[1] = 486 cpu_to_le16(vhci_hcd->port_status[rhport] >> 16); 487 488 usbip_dbg_vhci_rh(" GetPortStatus bye %x %x\n", ((u16 *)buf)[0], 489 ((u16 *)buf)[1]); 490 break; 491 case SetHubFeature: 492 usbip_dbg_vhci_rh(" SetHubFeature\n"); 493 retval = -EPIPE; 494 break; 495 case SetPortFeature: 496 switch (wValue) { 497 case USB_PORT_FEAT_LINK_STATE: 498 usbip_dbg_vhci_rh( 499 " SetPortFeature: USB_PORT_FEAT_LINK_STATE\n"); 500 if (hcd->speed != HCD_USB3) { 501 pr_err("USB_PORT_FEAT_LINK_STATE req not " 502 "supported for USB 2.0 roothub\n"); 503 goto error; 504 } 505 /* 506 * Since this is dummy we don't have an actual link so 507 * there is nothing to do for the SET_LINK_STATE cmd 508 */ 509 break; 510 case USB_PORT_FEAT_U1_TIMEOUT: 511 usbip_dbg_vhci_rh( 512 " SetPortFeature: USB_PORT_FEAT_U1_TIMEOUT\n"); 513 fallthrough; 514 case USB_PORT_FEAT_U2_TIMEOUT: 515 usbip_dbg_vhci_rh( 516 " SetPortFeature: USB_PORT_FEAT_U2_TIMEOUT\n"); 517 /* TODO: add suspend/resume support! */ 518 if (hcd->speed != HCD_USB3) { 519 pr_err("USB_PORT_FEAT_U1/2_TIMEOUT req not " 520 "supported for USB 2.0 roothub\n"); 521 goto error; 522 } 523 break; 524 case USB_PORT_FEAT_SUSPEND: 525 usbip_dbg_vhci_rh( 526 " SetPortFeature: USB_PORT_FEAT_SUSPEND\n"); 527 /* Applicable only for USB2.0 hub */ 528 if (hcd->speed == HCD_USB3) { 529 pr_err("USB_PORT_FEAT_SUSPEND req not " 530 "supported for USB 3.0 roothub\n"); 531 goto error; 532 } 533 534 if (invalid_rhport) { 535 pr_err("invalid port number %d\n", wIndex); 536 goto error; 537 } 538 539 vhci_hcd->port_status[rhport] |= USB_PORT_STAT_SUSPEND; 540 break; 541 case USB_PORT_FEAT_POWER: 542 usbip_dbg_vhci_rh( 543 " SetPortFeature: USB_PORT_FEAT_POWER\n"); 544 if (invalid_rhport) { 545 pr_err("invalid port number %d\n", wIndex); 546 goto error; 547 } 548 if (hcd->speed == HCD_USB3) 549 vhci_hcd->port_status[rhport] |= USB_SS_PORT_STAT_POWER; 550 else 551 vhci_hcd->port_status[rhport] |= USB_PORT_STAT_POWER; 552 break; 553 case USB_PORT_FEAT_BH_PORT_RESET: 554 usbip_dbg_vhci_rh( 555 " SetPortFeature: USB_PORT_FEAT_BH_PORT_RESET\n"); 556 if (invalid_rhport) { 557 pr_err("invalid port number %d\n", wIndex); 558 goto error; 559 } 560 /* Applicable only for USB3.0 hub */ 561 if (hcd->speed != HCD_USB3) { 562 pr_err("USB_PORT_FEAT_BH_PORT_RESET req not " 563 "supported for USB 2.0 roothub\n"); 564 goto error; 565 } 566 fallthrough; 567 case USB_PORT_FEAT_RESET: 568 usbip_dbg_vhci_rh( 569 " SetPortFeature: USB_PORT_FEAT_RESET\n"); 570 if (invalid_rhport) { 571 pr_err("invalid port number %d\n", wIndex); 572 goto error; 573 } 574 /* if it's already enabled, disable */ 575 if (hcd->speed == HCD_USB3) { 576 vhci_hcd->port_status[rhport] = 0; 577 vhci_hcd->port_status[rhport] = 578 (USB_SS_PORT_STAT_POWER | 579 USB_PORT_STAT_CONNECTION | 580 USB_PORT_STAT_RESET); 581 } else if (vhci_hcd->port_status[rhport] & USB_PORT_STAT_ENABLE) { 582 vhci_hcd->port_status[rhport] &= ~(USB_PORT_STAT_ENABLE 583 | USB_PORT_STAT_LOW_SPEED 584 | USB_PORT_STAT_HIGH_SPEED); 585 } 586 587 /* 50msec reset signaling */ 588 vhci_hcd->re_timeout = jiffies + msecs_to_jiffies(50); 589 fallthrough; 590 default: 591 usbip_dbg_vhci_rh(" SetPortFeature: default %d\n", 592 wValue); 593 if (invalid_rhport) { 594 pr_err("invalid port number %d\n", wIndex); 595 goto error; 596 } 597 if (hcd->speed == HCD_USB3) { 598 if ((vhci_hcd->port_status[rhport] & 599 USB_SS_PORT_STAT_POWER) != 0) { 600 vhci_hcd->port_status[rhport] |= (1 << wValue); 601 } 602 } else 603 if ((vhci_hcd->port_status[rhport] & 604 USB_PORT_STAT_POWER) != 0) { 605 vhci_hcd->port_status[rhport] |= (1 << wValue); 606 } 607 } 608 break; 609 case GetPortErrorCount: 610 usbip_dbg_vhci_rh(" GetPortErrorCount\n"); 611 if (hcd->speed != HCD_USB3) { 612 pr_err("GetPortErrorCount req not " 613 "supported for USB 2.0 roothub\n"); 614 goto error; 615 } 616 /* We'll always return 0 since this is a dummy hub */ 617 *(__le32 *) buf = cpu_to_le32(0); 618 break; 619 case SetHubDepth: 620 usbip_dbg_vhci_rh(" SetHubDepth\n"); 621 if (hcd->speed != HCD_USB3) { 622 pr_err("SetHubDepth req not supported for " 623 "USB 2.0 roothub\n"); 624 goto error; 625 } 626 break; 627 default: 628 pr_err("default hub control req: %04x v%04x i%04x l%d\n", 629 typeReq, wValue, wIndex, wLength); 630 error: 631 /* "protocol stall" on error */ 632 retval = -EPIPE; 633 } 634 635 if (usbip_dbg_flag_vhci_rh) { 636 pr_debug("port %d\n", rhport); 637 /* Only dump valid port status */ 638 if (!invalid_rhport) { 639 dump_port_status_diff(prev_port_status[rhport], 640 vhci_hcd->port_status[rhport], 641 hcd->speed == HCD_USB3); 642 } 643 } 644 usbip_dbg_vhci_rh(" bye\n"); 645 646 spin_unlock_irqrestore(&vhci->lock, flags); 647 648 if (!invalid_rhport && 649 (vhci_hcd->port_status[rhport] & PORT_C_MASK) != 0) { 650 usb_hcd_poll_rh_status(hcd); 651 } 652 653 return retval; 654 } 655 656 static void vhci_tx_urb(struct urb *urb, struct vhci_device *vdev) 657 { 658 struct vhci_priv *priv; 659 struct vhci_hcd *vhci_hcd = vdev_to_vhci_hcd(vdev); 660 unsigned long flags; 661 662 priv = kzalloc(sizeof(struct vhci_priv), GFP_ATOMIC); 663 if (!priv) { 664 usbip_event_add(&vdev->ud, VDEV_EVENT_ERROR_MALLOC); 665 return; 666 } 667 668 spin_lock_irqsave(&vdev->priv_lock, flags); 669 670 priv->seqnum = atomic_inc_return(&vhci_hcd->seqnum); 671 if (priv->seqnum == 0xffff) 672 dev_info(&urb->dev->dev, "seqnum max\n"); 673 674 priv->vdev = vdev; 675 priv->urb = urb; 676 677 urb->hcpriv = (void *) priv; 678 679 list_add_tail(&priv->list, &vdev->priv_tx); 680 681 wake_up(&vdev->waitq_tx); 682 spin_unlock_irqrestore(&vdev->priv_lock, flags); 683 } 684 685 static int vhci_urb_enqueue(struct usb_hcd *hcd, struct urb *urb, gfp_t mem_flags) 686 { 687 struct vhci_hcd *vhci_hcd = hcd_to_vhci_hcd(hcd); 688 struct vhci *vhci = vhci_hcd->vhci; 689 struct device *dev = &urb->dev->dev; 690 u8 portnum = urb->dev->portnum; 691 int ret = 0; 692 struct vhci_device *vdev; 693 unsigned long flags; 694 695 if (portnum > VHCI_HC_PORTS) { 696 pr_err("invalid port number %d\n", portnum); 697 return -ENODEV; 698 } 699 vdev = &vhci_hcd->vdev[portnum-1]; 700 701 if (!urb->transfer_buffer && !urb->num_sgs && 702 urb->transfer_buffer_length) { 703 dev_dbg(dev, "Null URB transfer buffer\n"); 704 return -EINVAL; 705 } 706 707 spin_lock_irqsave(&vhci->lock, flags); 708 709 if (urb->status != -EINPROGRESS) { 710 dev_err(dev, "URB already unlinked!, status %d\n", urb->status); 711 spin_unlock_irqrestore(&vhci->lock, flags); 712 return urb->status; 713 } 714 715 /* refuse enqueue for dead connection */ 716 spin_lock(&vdev->ud.lock); 717 if (vdev->ud.status == VDEV_ST_NULL || 718 vdev->ud.status == VDEV_ST_ERROR) { 719 dev_err(dev, "enqueue for inactive port %d\n", vdev->rhport); 720 spin_unlock(&vdev->ud.lock); 721 spin_unlock_irqrestore(&vhci->lock, flags); 722 return -ENODEV; 723 } 724 spin_unlock(&vdev->ud.lock); 725 726 ret = usb_hcd_link_urb_to_ep(hcd, urb); 727 if (ret) 728 goto no_need_unlink; 729 730 /* 731 * The enumeration process is as follows; 732 * 733 * 1. Get_Descriptor request to DevAddrs(0) EndPoint(0) 734 * to get max packet length of default pipe 735 * 736 * 2. Set_Address request to DevAddr(0) EndPoint(0) 737 * 738 */ 739 if (usb_pipedevice(urb->pipe) == 0) { 740 __u8 type = usb_pipetype(urb->pipe); 741 struct usb_ctrlrequest *ctrlreq = 742 (struct usb_ctrlrequest *) urb->setup_packet; 743 744 if (type != PIPE_CONTROL || !ctrlreq) { 745 dev_err(dev, "invalid request to devnum 0\n"); 746 ret = -EINVAL; 747 goto no_need_xmit; 748 } 749 750 switch (ctrlreq->bRequest) { 751 case USB_REQ_SET_ADDRESS: 752 /* set_address may come when a device is reset */ 753 dev_info(dev, "SetAddress Request (%d) to port %d\n", 754 ctrlreq->wValue, vdev->rhport); 755 756 usb_put_dev(vdev->udev); 757 vdev->udev = usb_get_dev(urb->dev); 758 759 spin_lock(&vdev->ud.lock); 760 vdev->ud.status = VDEV_ST_USED; 761 spin_unlock(&vdev->ud.lock); 762 763 if (urb->status == -EINPROGRESS) { 764 /* This request is successfully completed. */ 765 /* If not -EINPROGRESS, possibly unlinked. */ 766 urb->status = 0; 767 } 768 769 goto no_need_xmit; 770 771 case USB_REQ_GET_DESCRIPTOR: 772 if (ctrlreq->wValue == cpu_to_le16(USB_DT_DEVICE << 8)) 773 usbip_dbg_vhci_hc( 774 "Not yet?:Get_Descriptor to device 0 (get max pipe size)\n"); 775 776 usb_put_dev(vdev->udev); 777 vdev->udev = usb_get_dev(urb->dev); 778 goto out; 779 780 default: 781 /* NOT REACHED */ 782 dev_err(dev, 783 "invalid request to devnum 0 bRequest %u, wValue %u\n", 784 ctrlreq->bRequest, 785 ctrlreq->wValue); 786 ret = -EINVAL; 787 goto no_need_xmit; 788 } 789 790 } 791 792 out: 793 vhci_tx_urb(urb, vdev); 794 spin_unlock_irqrestore(&vhci->lock, flags); 795 796 return 0; 797 798 no_need_xmit: 799 usb_hcd_unlink_urb_from_ep(hcd, urb); 800 no_need_unlink: 801 spin_unlock_irqrestore(&vhci->lock, flags); 802 if (!ret) { 803 /* usb_hcd_giveback_urb() should be called with 804 * irqs disabled 805 */ 806 local_irq_disable(); 807 usb_hcd_giveback_urb(hcd, urb, urb->status); 808 local_irq_enable(); 809 } 810 return ret; 811 } 812 813 /* 814 * vhci_rx gives back the urb after receiving the reply of the urb. If an 815 * unlink pdu is sent or not, vhci_rx receives a normal return pdu and gives 816 * back its urb. For the driver unlinking the urb, the content of the urb is 817 * not important, but the calling to its completion handler is important; the 818 * completion of unlinking is notified by the completion handler. 819 * 820 * 821 * CLIENT SIDE 822 * 823 * - When vhci_hcd receives RET_SUBMIT, 824 * 825 * - case 1a). the urb of the pdu is not unlinking. 826 * - normal case 827 * => just give back the urb 828 * 829 * - case 1b). the urb of the pdu is unlinking. 830 * - usbip.ko will return a reply of the unlinking request. 831 * => give back the urb now and go to case 2b). 832 * 833 * - When vhci_hcd receives RET_UNLINK, 834 * 835 * - case 2a). a submit request is still pending in vhci_hcd. 836 * - urb was really pending in usbip.ko and urb_unlink_urb() was 837 * completed there. 838 * => free a pending submit request 839 * => notify unlink completeness by giving back the urb 840 * 841 * - case 2b). a submit request is *not* pending in vhci_hcd. 842 * - urb was already given back to the core driver. 843 * => do not give back the urb 844 * 845 * 846 * SERVER SIDE 847 * 848 * - When usbip receives CMD_UNLINK, 849 * 850 * - case 3a). the urb of the unlink request is now in submission. 851 * => do usb_unlink_urb(). 852 * => after the unlink is completed, send RET_UNLINK. 853 * 854 * - case 3b). the urb of the unlink request is not in submission. 855 * - may be already completed or never be received 856 * => send RET_UNLINK 857 * 858 */ 859 static int vhci_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status) 860 { 861 struct vhci_hcd *vhci_hcd = hcd_to_vhci_hcd(hcd); 862 struct vhci *vhci = vhci_hcd->vhci; 863 struct vhci_priv *priv; 864 struct vhci_device *vdev; 865 unsigned long flags; 866 867 spin_lock_irqsave(&vhci->lock, flags); 868 869 priv = urb->hcpriv; 870 if (!priv) { 871 /* URB was never linked! or will be soon given back by 872 * vhci_rx. */ 873 spin_unlock_irqrestore(&vhci->lock, flags); 874 return -EIDRM; 875 } 876 877 { 878 int ret = 0; 879 880 ret = usb_hcd_check_unlink_urb(hcd, urb, status); 881 if (ret) { 882 spin_unlock_irqrestore(&vhci->lock, flags); 883 return ret; 884 } 885 } 886 887 /* send unlink request here? */ 888 vdev = priv->vdev; 889 890 if (!vdev->ud.tcp_socket) { 891 /* tcp connection is closed */ 892 spin_lock(&vdev->priv_lock); 893 894 list_del(&priv->list); 895 kfree(priv); 896 urb->hcpriv = NULL; 897 898 spin_unlock(&vdev->priv_lock); 899 900 /* 901 * If tcp connection is alive, we have sent CMD_UNLINK. 902 * vhci_rx will receive RET_UNLINK and give back the URB. 903 * Otherwise, we give back it here. 904 */ 905 usb_hcd_unlink_urb_from_ep(hcd, urb); 906 907 spin_unlock_irqrestore(&vhci->lock, flags); 908 usb_hcd_giveback_urb(hcd, urb, urb->status); 909 spin_lock_irqsave(&vhci->lock, flags); 910 911 } else { 912 /* tcp connection is alive */ 913 struct vhci_unlink *unlink; 914 915 spin_lock(&vdev->priv_lock); 916 917 /* setup CMD_UNLINK pdu */ 918 unlink = kzalloc(sizeof(struct vhci_unlink), GFP_ATOMIC); 919 if (!unlink) { 920 spin_unlock(&vdev->priv_lock); 921 spin_unlock_irqrestore(&vhci->lock, flags); 922 usbip_event_add(&vdev->ud, VDEV_EVENT_ERROR_MALLOC); 923 return -ENOMEM; 924 } 925 926 unlink->seqnum = atomic_inc_return(&vhci_hcd->seqnum); 927 if (unlink->seqnum == 0xffff) 928 pr_info("seqnum max\n"); 929 930 unlink->unlink_seqnum = priv->seqnum; 931 932 /* send cmd_unlink and try to cancel the pending URB in the 933 * peer */ 934 list_add_tail(&unlink->list, &vdev->unlink_tx); 935 wake_up(&vdev->waitq_tx); 936 937 spin_unlock(&vdev->priv_lock); 938 } 939 940 spin_unlock_irqrestore(&vhci->lock, flags); 941 942 usbip_dbg_vhci_hc("leave\n"); 943 return 0; 944 } 945 946 static void vhci_device_unlink_cleanup(struct vhci_device *vdev) 947 { 948 struct vhci_hcd *vhci_hcd = vdev_to_vhci_hcd(vdev); 949 struct usb_hcd *hcd = vhci_hcd_to_hcd(vhci_hcd); 950 struct vhci *vhci = vhci_hcd->vhci; 951 struct vhci_unlink *unlink, *tmp; 952 unsigned long flags; 953 954 spin_lock_irqsave(&vhci->lock, flags); 955 spin_lock(&vdev->priv_lock); 956 957 list_for_each_entry_safe(unlink, tmp, &vdev->unlink_tx, list) { 958 pr_info("unlink cleanup tx %lu\n", unlink->unlink_seqnum); 959 list_del(&unlink->list); 960 kfree(unlink); 961 } 962 963 while (!list_empty(&vdev->unlink_rx)) { 964 struct urb *urb; 965 966 unlink = list_first_entry(&vdev->unlink_rx, struct vhci_unlink, 967 list); 968 969 /* give back URB of unanswered unlink request */ 970 pr_info("unlink cleanup rx %lu\n", unlink->unlink_seqnum); 971 972 urb = pickup_urb_and_free_priv(vdev, unlink->unlink_seqnum); 973 if (!urb) { 974 pr_info("the urb (seqnum %lu) was already given back\n", 975 unlink->unlink_seqnum); 976 list_del(&unlink->list); 977 kfree(unlink); 978 continue; 979 } 980 981 urb->status = -ENODEV; 982 983 usb_hcd_unlink_urb_from_ep(hcd, urb); 984 985 list_del(&unlink->list); 986 987 spin_unlock(&vdev->priv_lock); 988 spin_unlock_irqrestore(&vhci->lock, flags); 989 990 usb_hcd_giveback_urb(hcd, urb, urb->status); 991 992 spin_lock_irqsave(&vhci->lock, flags); 993 spin_lock(&vdev->priv_lock); 994 995 kfree(unlink); 996 } 997 998 spin_unlock(&vdev->priv_lock); 999 spin_unlock_irqrestore(&vhci->lock, flags); 1000 } 1001 1002 /* 1003 * The important thing is that only one context begins cleanup. 1004 * This is why error handling and cleanup become simple. 1005 * We do not want to consider race condition as possible. 1006 */ 1007 static void vhci_shutdown_connection(struct usbip_device *ud) 1008 { 1009 struct vhci_device *vdev = container_of(ud, struct vhci_device, ud); 1010 1011 /* need this? see stub_dev.c */ 1012 if (ud->tcp_socket) { 1013 pr_debug("shutdown tcp_socket %d\n", ud->sockfd); 1014 kernel_sock_shutdown(ud->tcp_socket, SHUT_RDWR); 1015 } 1016 1017 /* kill threads related to this sdev */ 1018 if (vdev->ud.tcp_rx) { 1019 kthread_stop_put(vdev->ud.tcp_rx); 1020 vdev->ud.tcp_rx = NULL; 1021 } 1022 if (vdev->ud.tcp_tx) { 1023 kthread_stop_put(vdev->ud.tcp_tx); 1024 vdev->ud.tcp_tx = NULL; 1025 } 1026 pr_info("stop threads\n"); 1027 1028 /* active connection is closed */ 1029 if (vdev->ud.tcp_socket) { 1030 sockfd_put(vdev->ud.tcp_socket); 1031 vdev->ud.tcp_socket = NULL; 1032 vdev->ud.sockfd = -1; 1033 } 1034 pr_info("release socket\n"); 1035 1036 vhci_device_unlink_cleanup(vdev); 1037 1038 /* 1039 * rh_port_disconnect() is a trigger of ... 1040 * usb_disable_device(): 1041 * disable all the endpoints for a USB device. 1042 * usb_disable_endpoint(): 1043 * disable endpoints. pending urbs are unlinked(dequeued). 1044 * 1045 * NOTE: After calling rh_port_disconnect(), the USB device drivers of a 1046 * detached device should release used urbs in a cleanup function (i.e. 1047 * xxx_disconnect()). Therefore, vhci_hcd does not need to release 1048 * pushed urbs and their private data in this function. 1049 * 1050 * NOTE: vhci_dequeue() must be considered carefully. When shutting down 1051 * a connection, vhci_shutdown_connection() expects vhci_dequeue() 1052 * gives back pushed urbs and frees their private data by request of 1053 * the cleanup function of a USB driver. When unlinking a urb with an 1054 * active connection, vhci_dequeue() does not give back the urb which 1055 * is actually given back by vhci_rx after receiving its return pdu. 1056 * 1057 */ 1058 rh_port_disconnect(vdev); 1059 1060 pr_info("disconnect device\n"); 1061 } 1062 1063 static void vhci_device_reset(struct usbip_device *ud) 1064 { 1065 struct vhci_device *vdev = container_of(ud, struct vhci_device, ud); 1066 unsigned long flags; 1067 1068 spin_lock_irqsave(&ud->lock, flags); 1069 1070 vdev->speed = 0; 1071 vdev->devid = 0; 1072 1073 usb_put_dev(vdev->udev); 1074 vdev->udev = NULL; 1075 1076 if (ud->tcp_socket) { 1077 sockfd_put(ud->tcp_socket); 1078 ud->tcp_socket = NULL; 1079 ud->sockfd = -1; 1080 } 1081 ud->status = VDEV_ST_NULL; 1082 1083 spin_unlock_irqrestore(&ud->lock, flags); 1084 } 1085 1086 static void vhci_device_unusable(struct usbip_device *ud) 1087 { 1088 unsigned long flags; 1089 1090 spin_lock_irqsave(&ud->lock, flags); 1091 ud->status = VDEV_ST_ERROR; 1092 spin_unlock_irqrestore(&ud->lock, flags); 1093 } 1094 1095 static void vhci_device_init(struct vhci_device *vdev) 1096 { 1097 memset(vdev, 0, sizeof(struct vhci_device)); 1098 1099 vdev->ud.side = USBIP_VHCI; 1100 vdev->ud.status = VDEV_ST_NULL; 1101 spin_lock_init(&vdev->ud.lock); 1102 1103 INIT_LIST_HEAD(&vdev->priv_rx); 1104 INIT_LIST_HEAD(&vdev->priv_tx); 1105 INIT_LIST_HEAD(&vdev->unlink_tx); 1106 INIT_LIST_HEAD(&vdev->unlink_rx); 1107 spin_lock_init(&vdev->priv_lock); 1108 1109 init_waitqueue_head(&vdev->waitq_tx); 1110 1111 vdev->ud.eh_ops.shutdown = vhci_shutdown_connection; 1112 vdev->ud.eh_ops.reset = vhci_device_reset; 1113 vdev->ud.eh_ops.unusable = vhci_device_unusable; 1114 1115 usbip_start_eh(&vdev->ud); 1116 } 1117 1118 static int hcd_name_to_id(const char *name) 1119 { 1120 char *c; 1121 long val; 1122 int ret; 1123 1124 c = strchr(name, '.'); 1125 if (c == NULL) 1126 return 0; 1127 1128 ret = kstrtol(c+1, 10, &val); 1129 if (ret < 0) 1130 return ret; 1131 1132 return val; 1133 } 1134 1135 static int vhci_setup(struct usb_hcd *hcd) 1136 { 1137 struct vhci *vhci = *((void **)dev_get_platdata(hcd->self.controller)); 1138 if (usb_hcd_is_primary_hcd(hcd)) { 1139 vhci->vhci_hcd_hs = hcd_to_vhci_hcd(hcd); 1140 vhci->vhci_hcd_hs->vhci = vhci; 1141 /* 1142 * Mark the first roothub as being USB 2.0. 1143 * The USB 3.0 roothub will be registered later by 1144 * vhci_hcd_probe() 1145 */ 1146 hcd->speed = HCD_USB2; 1147 hcd->self.root_hub->speed = USB_SPEED_HIGH; 1148 } else { 1149 vhci->vhci_hcd_ss = hcd_to_vhci_hcd(hcd); 1150 vhci->vhci_hcd_ss->vhci = vhci; 1151 hcd->speed = HCD_USB3; 1152 hcd->self.root_hub->speed = USB_SPEED_SUPER; 1153 } 1154 1155 /* 1156 * Support SG. 1157 * sg_tablesize is an arbitrary value to alleviate memory pressure 1158 * on the host. 1159 */ 1160 hcd->self.sg_tablesize = 32; 1161 hcd->self.no_sg_constraint = 1; 1162 1163 return 0; 1164 } 1165 1166 static int vhci_start(struct usb_hcd *hcd) 1167 { 1168 struct vhci_hcd *vhci_hcd = hcd_to_vhci_hcd(hcd); 1169 int id, rhport; 1170 int err; 1171 1172 usbip_dbg_vhci_hc("enter vhci_start\n"); 1173 1174 if (usb_hcd_is_primary_hcd(hcd)) 1175 spin_lock_init(&vhci_hcd->vhci->lock); 1176 1177 /* initialize private data of usb_hcd */ 1178 1179 for (rhport = 0; rhport < VHCI_HC_PORTS; rhport++) { 1180 struct vhci_device *vdev = &vhci_hcd->vdev[rhport]; 1181 1182 vhci_device_init(vdev); 1183 vdev->rhport = rhport; 1184 } 1185 1186 atomic_set(&vhci_hcd->seqnum, 0); 1187 1188 hcd->power_budget = 0; /* no limit */ 1189 hcd->uses_new_polling = 1; 1190 1191 #ifdef CONFIG_USB_OTG 1192 hcd->self.otg_port = 1; 1193 #endif 1194 1195 id = hcd_name_to_id(hcd_name(hcd)); 1196 if (id < 0) { 1197 pr_err("invalid vhci name %s\n", hcd_name(hcd)); 1198 return -EINVAL; 1199 } 1200 1201 /* vhci_hcd is now ready to be controlled through sysfs */ 1202 if (id == 0 && usb_hcd_is_primary_hcd(hcd)) { 1203 err = vhci_init_attr_group(); 1204 if (err) { 1205 dev_err(hcd_dev(hcd), "init attr group failed, err = %d\n", err); 1206 return err; 1207 } 1208 err = sysfs_create_group(&hcd_dev(hcd)->kobj, &vhci_attr_group); 1209 if (err) { 1210 dev_err(hcd_dev(hcd), "create sysfs files failed, err = %d\n", err); 1211 vhci_finish_attr_group(); 1212 return err; 1213 } 1214 pr_info("created sysfs %s\n", hcd_name(hcd)); 1215 } 1216 1217 return 0; 1218 } 1219 1220 static void vhci_stop(struct usb_hcd *hcd) 1221 { 1222 struct vhci_hcd *vhci_hcd = hcd_to_vhci_hcd(hcd); 1223 int id, rhport; 1224 1225 usbip_dbg_vhci_hc("stop VHCI controller\n"); 1226 1227 /* 1. remove the userland interface of vhci_hcd */ 1228 id = hcd_name_to_id(hcd_name(hcd)); 1229 if (id == 0 && usb_hcd_is_primary_hcd(hcd)) { 1230 sysfs_remove_group(&hcd_dev(hcd)->kobj, &vhci_attr_group); 1231 vhci_finish_attr_group(); 1232 } 1233 1234 /* 2. shutdown all the ports of vhci_hcd */ 1235 for (rhport = 0; rhport < VHCI_HC_PORTS; rhport++) { 1236 struct vhci_device *vdev = &vhci_hcd->vdev[rhport]; 1237 1238 usbip_event_add(&vdev->ud, VDEV_EVENT_REMOVED); 1239 usbip_stop_eh(&vdev->ud); 1240 } 1241 } 1242 1243 static int vhci_get_frame_number(struct usb_hcd *hcd) 1244 { 1245 dev_err_ratelimited(&hcd->self.root_hub->dev, "Not yet implemented\n"); 1246 return 0; 1247 } 1248 1249 #ifdef CONFIG_PM 1250 1251 /* FIXME: suspend/resume */ 1252 static int vhci_bus_suspend(struct usb_hcd *hcd) 1253 { 1254 struct vhci *vhci = *((void **)dev_get_platdata(hcd->self.controller)); 1255 unsigned long flags; 1256 1257 dev_dbg(&hcd->self.root_hub->dev, "%s\n", __func__); 1258 1259 spin_lock_irqsave(&vhci->lock, flags); 1260 hcd->state = HC_STATE_SUSPENDED; 1261 spin_unlock_irqrestore(&vhci->lock, flags); 1262 1263 return 0; 1264 } 1265 1266 static int vhci_bus_resume(struct usb_hcd *hcd) 1267 { 1268 struct vhci *vhci = *((void **)dev_get_platdata(hcd->self.controller)); 1269 int rc = 0; 1270 unsigned long flags; 1271 1272 dev_dbg(&hcd->self.root_hub->dev, "%s\n", __func__); 1273 1274 spin_lock_irqsave(&vhci->lock, flags); 1275 if (!HCD_HW_ACCESSIBLE(hcd)) 1276 rc = -ESHUTDOWN; 1277 else 1278 hcd->state = HC_STATE_RUNNING; 1279 spin_unlock_irqrestore(&vhci->lock, flags); 1280 1281 return rc; 1282 } 1283 1284 #else 1285 1286 #define vhci_bus_suspend NULL 1287 #define vhci_bus_resume NULL 1288 #endif 1289 1290 /* Change a group of bulk endpoints to support multiple stream IDs */ 1291 static int vhci_alloc_streams(struct usb_hcd *hcd, struct usb_device *udev, 1292 struct usb_host_endpoint **eps, unsigned int num_eps, 1293 unsigned int num_streams, gfp_t mem_flags) 1294 { 1295 dev_dbg(&hcd->self.root_hub->dev, "vhci_alloc_streams not implemented\n"); 1296 return 0; 1297 } 1298 1299 /* Reverts a group of bulk endpoints back to not using stream IDs. */ 1300 static int vhci_free_streams(struct usb_hcd *hcd, struct usb_device *udev, 1301 struct usb_host_endpoint **eps, unsigned int num_eps, 1302 gfp_t mem_flags) 1303 { 1304 dev_dbg(&hcd->self.root_hub->dev, "vhci_free_streams not implemented\n"); 1305 return 0; 1306 } 1307 1308 static const struct hc_driver vhci_hc_driver = { 1309 .description = driver_name, 1310 .product_desc = driver_desc, 1311 .hcd_priv_size = sizeof(struct vhci_hcd), 1312 1313 .flags = HCD_USB3 | HCD_SHARED, 1314 1315 .reset = vhci_setup, 1316 .start = vhci_start, 1317 .stop = vhci_stop, 1318 1319 .urb_enqueue = vhci_urb_enqueue, 1320 .urb_dequeue = vhci_urb_dequeue, 1321 1322 .get_frame_number = vhci_get_frame_number, 1323 1324 .hub_status_data = vhci_hub_status, 1325 .hub_control = vhci_hub_control, 1326 .bus_suspend = vhci_bus_suspend, 1327 .bus_resume = vhci_bus_resume, 1328 1329 .alloc_streams = vhci_alloc_streams, 1330 .free_streams = vhci_free_streams, 1331 }; 1332 1333 static int vhci_hcd_probe(struct platform_device *pdev) 1334 { 1335 struct vhci *vhci = *((void **)dev_get_platdata(&pdev->dev)); 1336 struct usb_hcd *hcd_hs; 1337 struct usb_hcd *hcd_ss; 1338 int ret; 1339 1340 usbip_dbg_vhci_hc("name %s id %d\n", pdev->name, pdev->id); 1341 1342 /* 1343 * Allocate and initialize hcd. 1344 * Our private data is also allocated automatically. 1345 */ 1346 hcd_hs = usb_create_hcd(&vhci_hc_driver, &pdev->dev, dev_name(&pdev->dev)); 1347 if (!hcd_hs) { 1348 pr_err("create primary hcd failed\n"); 1349 return -ENOMEM; 1350 } 1351 hcd_hs->has_tt = 1; 1352 1353 /* 1354 * Finish generic HCD structure initialization and register. 1355 * Call the driver's reset() and start() routines. 1356 */ 1357 ret = usb_add_hcd(hcd_hs, 0, 0); 1358 if (ret != 0) { 1359 pr_err("usb_add_hcd hs failed %d\n", ret); 1360 goto put_usb2_hcd; 1361 } 1362 1363 hcd_ss = usb_create_shared_hcd(&vhci_hc_driver, &pdev->dev, 1364 dev_name(&pdev->dev), hcd_hs); 1365 if (!hcd_ss) { 1366 ret = -ENOMEM; 1367 pr_err("create shared hcd failed\n"); 1368 goto remove_usb2_hcd; 1369 } 1370 1371 ret = usb_add_hcd(hcd_ss, 0, 0); 1372 if (ret) { 1373 pr_err("usb_add_hcd ss failed %d\n", ret); 1374 goto put_usb3_hcd; 1375 } 1376 1377 usbip_dbg_vhci_hc("bye\n"); 1378 return 0; 1379 1380 put_usb3_hcd: 1381 usb_put_hcd(hcd_ss); 1382 remove_usb2_hcd: 1383 usb_remove_hcd(hcd_hs); 1384 put_usb2_hcd: 1385 usb_put_hcd(hcd_hs); 1386 vhci->vhci_hcd_hs = NULL; 1387 vhci->vhci_hcd_ss = NULL; 1388 return ret; 1389 } 1390 1391 static int vhci_hcd_remove(struct platform_device *pdev) 1392 { 1393 struct vhci *vhci = *((void **)dev_get_platdata(&pdev->dev)); 1394 1395 /* 1396 * Disconnects the root hub, 1397 * then reverses the effects of usb_add_hcd(), 1398 * invoking the HCD's stop() methods. 1399 */ 1400 usb_remove_hcd(vhci_hcd_to_hcd(vhci->vhci_hcd_ss)); 1401 usb_put_hcd(vhci_hcd_to_hcd(vhci->vhci_hcd_ss)); 1402 1403 usb_remove_hcd(vhci_hcd_to_hcd(vhci->vhci_hcd_hs)); 1404 usb_put_hcd(vhci_hcd_to_hcd(vhci->vhci_hcd_hs)); 1405 1406 vhci->vhci_hcd_hs = NULL; 1407 vhci->vhci_hcd_ss = NULL; 1408 1409 return 0; 1410 } 1411 1412 #ifdef CONFIG_PM 1413 1414 /* what should happen for USB/IP under suspend/resume? */ 1415 static int vhci_hcd_suspend(struct platform_device *pdev, pm_message_t state) 1416 { 1417 struct usb_hcd *hcd; 1418 struct vhci *vhci; 1419 int rhport; 1420 int connected = 0; 1421 int ret = 0; 1422 unsigned long flags; 1423 1424 dev_dbg(&pdev->dev, "%s\n", __func__); 1425 1426 hcd = platform_get_drvdata(pdev); 1427 if (!hcd) 1428 return 0; 1429 1430 vhci = *((void **)dev_get_platdata(hcd->self.controller)); 1431 1432 spin_lock_irqsave(&vhci->lock, flags); 1433 1434 for (rhport = 0; rhport < VHCI_HC_PORTS; rhport++) { 1435 if (vhci->vhci_hcd_hs->port_status[rhport] & 1436 USB_PORT_STAT_CONNECTION) 1437 connected += 1; 1438 1439 if (vhci->vhci_hcd_ss->port_status[rhport] & 1440 USB_PORT_STAT_CONNECTION) 1441 connected += 1; 1442 } 1443 1444 spin_unlock_irqrestore(&vhci->lock, flags); 1445 1446 if (connected > 0) { 1447 dev_info(&pdev->dev, 1448 "We have %d active connection%s. Do not suspend.\n", 1449 connected, (connected == 1 ? "" : "s")); 1450 ret = -EBUSY; 1451 } else { 1452 dev_info(&pdev->dev, "suspend vhci_hcd"); 1453 clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags); 1454 } 1455 1456 return ret; 1457 } 1458 1459 static int vhci_hcd_resume(struct platform_device *pdev) 1460 { 1461 struct usb_hcd *hcd; 1462 1463 dev_dbg(&pdev->dev, "%s\n", __func__); 1464 1465 hcd = platform_get_drvdata(pdev); 1466 if (!hcd) 1467 return 0; 1468 set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags); 1469 usb_hcd_poll_rh_status(hcd); 1470 1471 return 0; 1472 } 1473 1474 #else 1475 1476 #define vhci_hcd_suspend NULL 1477 #define vhci_hcd_resume NULL 1478 1479 #endif 1480 1481 static struct platform_driver vhci_driver = { 1482 .probe = vhci_hcd_probe, 1483 .remove = vhci_hcd_remove, 1484 .suspend = vhci_hcd_suspend, 1485 .resume = vhci_hcd_resume, 1486 .driver = { 1487 .name = driver_name, 1488 }, 1489 }; 1490 1491 static void del_platform_devices(void) 1492 { 1493 struct platform_device *pdev; 1494 int i; 1495 1496 for (i = 0; i < vhci_num_controllers; i++) { 1497 pdev = vhcis[i].pdev; 1498 if (pdev != NULL) 1499 platform_device_unregister(pdev); 1500 vhcis[i].pdev = NULL; 1501 } 1502 sysfs_remove_link(&platform_bus.kobj, driver_name); 1503 } 1504 1505 static int __init vhci_hcd_init(void) 1506 { 1507 int i, ret; 1508 1509 if (usb_disabled()) 1510 return -ENODEV; 1511 1512 if (vhci_num_controllers < 1) 1513 vhci_num_controllers = 1; 1514 1515 vhcis = kcalloc(vhci_num_controllers, sizeof(struct vhci), GFP_KERNEL); 1516 if (vhcis == NULL) 1517 return -ENOMEM; 1518 1519 for (i = 0; i < vhci_num_controllers; i++) { 1520 vhcis[i].pdev = platform_device_alloc(driver_name, i); 1521 if (!vhcis[i].pdev) { 1522 i--; 1523 while (i >= 0) 1524 platform_device_put(vhcis[i--].pdev); 1525 ret = -ENOMEM; 1526 goto err_device_alloc; 1527 } 1528 } 1529 for (i = 0; i < vhci_num_controllers; i++) { 1530 void *vhci = &vhcis[i]; 1531 ret = platform_device_add_data(vhcis[i].pdev, &vhci, sizeof(void *)); 1532 if (ret) 1533 goto err_driver_register; 1534 } 1535 1536 ret = platform_driver_register(&vhci_driver); 1537 if (ret) 1538 goto err_driver_register; 1539 1540 for (i = 0; i < vhci_num_controllers; i++) { 1541 ret = platform_device_add(vhcis[i].pdev); 1542 if (ret < 0) { 1543 i--; 1544 while (i >= 0) 1545 platform_device_del(vhcis[i--].pdev); 1546 goto err_add_hcd; 1547 } 1548 } 1549 1550 return ret; 1551 1552 err_add_hcd: 1553 platform_driver_unregister(&vhci_driver); 1554 err_driver_register: 1555 for (i = 0; i < vhci_num_controllers; i++) 1556 platform_device_put(vhcis[i].pdev); 1557 err_device_alloc: 1558 kfree(vhcis); 1559 return ret; 1560 } 1561 1562 static void __exit vhci_hcd_exit(void) 1563 { 1564 del_platform_devices(); 1565 platform_driver_unregister(&vhci_driver); 1566 kfree(vhcis); 1567 } 1568 1569 module_init(vhci_hcd_init); 1570 module_exit(vhci_hcd_exit); 1571 1572 MODULE_AUTHOR(DRIVER_AUTHOR); 1573 MODULE_DESCRIPTION(DRIVER_DESC); 1574 MODULE_LICENSE("GPL"); 1575