1 /* Driver for USB Mass Storage compliant devices 2 * 3 * Current development and maintenance by: 4 * (c) 1999-2003 Matthew Dharm (mdharm-usb@one-eyed-alien.net) 5 * 6 * Developed with the assistance of: 7 * (c) 2000 David L. Brown, Jr. (usb-storage@davidb.org) 8 * (c) 2003-2009 Alan Stern (stern@rowland.harvard.edu) 9 * 10 * Initial work by: 11 * (c) 1999 Michael Gee (michael@linuxspecific.com) 12 * 13 * usb_device_id support by Adam J. Richter (adam@yggdrasil.com): 14 * (c) 2000 Yggdrasil Computing, Inc. 15 * 16 * This driver is based on the 'USB Mass Storage Class' document. This 17 * describes in detail the protocol used to communicate with such 18 * devices. Clearly, the designers had SCSI and ATAPI commands in 19 * mind when they created this document. The commands are all very 20 * similar to commands in the SCSI-II and ATAPI specifications. 21 * 22 * It is important to note that in a number of cases this class 23 * exhibits class-specific exemptions from the USB specification. 24 * Notably the usage of NAK, STALL and ACK differs from the norm, in 25 * that they are used to communicate wait, failed and OK on commands. 26 * 27 * Also, for certain devices, the interrupt endpoint is used to convey 28 * status of a command. 29 * 30 * Please see http://www.one-eyed-alien.net/~mdharm/linux-usb for more 31 * information about this driver. 32 * 33 * This program is free software; you can redistribute it and/or modify it 34 * under the terms of the GNU General Public License as published by the 35 * Free Software Foundation; either version 2, or (at your option) any 36 * later version. 37 * 38 * This program is distributed in the hope that it will be useful, but 39 * WITHOUT ANY WARRANTY; without even the implied warranty of 40 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU 41 * General Public License for more details. 42 * 43 * You should have received a copy of the GNU General Public License along 44 * with this program; if not, write to the Free Software Foundation, Inc., 45 * 675 Mass Ave, Cambridge, MA 02139, USA. 46 */ 47 48 #ifdef CONFIG_USB_STORAGE_DEBUG 49 #define DEBUG 50 #endif 51 52 #include <linux/sched.h> 53 #include <linux/errno.h> 54 #include <linux/freezer.h> 55 #include <linux/module.h> 56 #include <linux/init.h> 57 #include <linux/slab.h> 58 #include <linux/kthread.h> 59 #include <linux/mutex.h> 60 #include <linux/utsname.h> 61 62 #include <scsi/scsi.h> 63 #include <scsi/scsi_cmnd.h> 64 #include <scsi/scsi_device.h> 65 66 #include "usb.h" 67 #include "scsiglue.h" 68 #include "transport.h" 69 #include "protocol.h" 70 #include "debug.h" 71 #include "initializers.h" 72 73 #include "sierra_ms.h" 74 #include "option_ms.h" 75 76 /* Some informational data */ 77 MODULE_AUTHOR("Matthew Dharm <mdharm-usb@one-eyed-alien.net>"); 78 MODULE_DESCRIPTION("USB Mass Storage driver for Linux"); 79 MODULE_LICENSE("GPL"); 80 81 static unsigned int delay_use = 1; 82 module_param(delay_use, uint, S_IRUGO | S_IWUSR); 83 MODULE_PARM_DESC(delay_use, "seconds to delay before using a new device"); 84 85 static char quirks[128]; 86 module_param_string(quirks, quirks, sizeof(quirks), S_IRUGO | S_IWUSR); 87 MODULE_PARM_DESC(quirks, "supplemental list of device IDs and their quirks"); 88 89 90 /* 91 * The entries in this table correspond, line for line, 92 * with the entries in usb_storage_usb_ids[], defined in usual-tables.c. 93 */ 94 95 /* The vendor name should be kept at eight characters or less, and 96 * the product name should be kept at 16 characters or less. If a device 97 * has the US_FL_FIX_INQUIRY flag, then the vendor and product names 98 * normally generated by a device thorugh the INQUIRY response will be 99 * taken from this list, and this is the reason for the above size 100 * restriction. However, if the flag is not present, then you 101 * are free to use as many characters as you like. 102 */ 103 104 #define UNUSUAL_DEV(idVendor, idProduct, bcdDeviceMin, bcdDeviceMax, \ 105 vendor_name, product_name, use_protocol, use_transport, \ 106 init_function, Flags) \ 107 { \ 108 .vendorName = vendor_name, \ 109 .productName = product_name, \ 110 .useProtocol = use_protocol, \ 111 .useTransport = use_transport, \ 112 .initFunction = init_function, \ 113 } 114 115 #define COMPLIANT_DEV UNUSUAL_DEV 116 117 #define USUAL_DEV(use_protocol, use_transport, use_type) \ 118 { \ 119 .useProtocol = use_protocol, \ 120 .useTransport = use_transport, \ 121 } 122 123 static struct us_unusual_dev us_unusual_dev_list[] = { 124 # include "unusual_devs.h" 125 { } /* Terminating entry */ 126 }; 127 128 #undef UNUSUAL_DEV 129 #undef COMPLIANT_DEV 130 #undef USUAL_DEV 131 132 133 #ifdef CONFIG_PM /* Minimal support for suspend and resume */ 134 135 int usb_stor_suspend(struct usb_interface *iface, pm_message_t message) 136 { 137 struct us_data *us = usb_get_intfdata(iface); 138 139 /* Wait until no command is running */ 140 mutex_lock(&us->dev_mutex); 141 142 US_DEBUGP("%s\n", __func__); 143 if (us->suspend_resume_hook) 144 (us->suspend_resume_hook)(us, US_SUSPEND); 145 146 /* When runtime PM is working, we'll set a flag to indicate 147 * whether we should autoresume when a SCSI request arrives. */ 148 149 mutex_unlock(&us->dev_mutex); 150 return 0; 151 } 152 EXPORT_SYMBOL_GPL(usb_stor_suspend); 153 154 int usb_stor_resume(struct usb_interface *iface) 155 { 156 struct us_data *us = usb_get_intfdata(iface); 157 158 mutex_lock(&us->dev_mutex); 159 160 US_DEBUGP("%s\n", __func__); 161 if (us->suspend_resume_hook) 162 (us->suspend_resume_hook)(us, US_RESUME); 163 164 mutex_unlock(&us->dev_mutex); 165 return 0; 166 } 167 EXPORT_SYMBOL_GPL(usb_stor_resume); 168 169 int usb_stor_reset_resume(struct usb_interface *iface) 170 { 171 struct us_data *us = usb_get_intfdata(iface); 172 173 US_DEBUGP("%s\n", __func__); 174 175 /* Report the reset to the SCSI core */ 176 usb_stor_report_bus_reset(us); 177 178 /* FIXME: Notify the subdrivers that they need to reinitialize 179 * the device */ 180 return 0; 181 } 182 EXPORT_SYMBOL_GPL(usb_stor_reset_resume); 183 184 #endif /* CONFIG_PM */ 185 186 /* 187 * The next two routines get called just before and just after 188 * a USB port reset, whether from this driver or a different one. 189 */ 190 191 int usb_stor_pre_reset(struct usb_interface *iface) 192 { 193 struct us_data *us = usb_get_intfdata(iface); 194 195 US_DEBUGP("%s\n", __func__); 196 197 /* Make sure no command runs during the reset */ 198 mutex_lock(&us->dev_mutex); 199 return 0; 200 } 201 EXPORT_SYMBOL_GPL(usb_stor_pre_reset); 202 203 int usb_stor_post_reset(struct usb_interface *iface) 204 { 205 struct us_data *us = usb_get_intfdata(iface); 206 207 US_DEBUGP("%s\n", __func__); 208 209 /* Report the reset to the SCSI core */ 210 usb_stor_report_bus_reset(us); 211 212 /* FIXME: Notify the subdrivers that they need to reinitialize 213 * the device */ 214 215 mutex_unlock(&us->dev_mutex); 216 return 0; 217 } 218 EXPORT_SYMBOL_GPL(usb_stor_post_reset); 219 220 /* 221 * fill_inquiry_response takes an unsigned char array (which must 222 * be at least 36 characters) and populates the vendor name, 223 * product name, and revision fields. Then the array is copied 224 * into the SCSI command's response buffer (oddly enough 225 * called request_buffer). data_len contains the length of the 226 * data array, which again must be at least 36. 227 */ 228 229 void fill_inquiry_response(struct us_data *us, unsigned char *data, 230 unsigned int data_len) 231 { 232 if (data_len<36) // You lose. 233 return; 234 235 memset(data+8, ' ', 28); 236 if(data[0]&0x20) { /* USB device currently not connected. Return 237 peripheral qualifier 001b ("...however, the 238 physical device is not currently connected 239 to this logical unit") and leave vendor and 240 product identification empty. ("If the target 241 does store some of the INQUIRY data on the 242 device, it may return zeros or ASCII spaces 243 (20h) in those fields until the data is 244 available from the device."). */ 245 } else { 246 u16 bcdDevice = le16_to_cpu(us->pusb_dev->descriptor.bcdDevice); 247 int n; 248 249 n = strlen(us->unusual_dev->vendorName); 250 memcpy(data+8, us->unusual_dev->vendorName, min(8, n)); 251 n = strlen(us->unusual_dev->productName); 252 memcpy(data+16, us->unusual_dev->productName, min(16, n)); 253 254 data[32] = 0x30 + ((bcdDevice>>12) & 0x0F); 255 data[33] = 0x30 + ((bcdDevice>>8) & 0x0F); 256 data[34] = 0x30 + ((bcdDevice>>4) & 0x0F); 257 data[35] = 0x30 + ((bcdDevice) & 0x0F); 258 } 259 260 usb_stor_set_xfer_buf(data, data_len, us->srb); 261 } 262 EXPORT_SYMBOL_GPL(fill_inquiry_response); 263 264 static int usb_stor_control_thread(void * __us) 265 { 266 struct us_data *us = (struct us_data *)__us; 267 struct Scsi_Host *host = us_to_host(us); 268 269 for(;;) { 270 US_DEBUGP("*** thread sleeping.\n"); 271 if (wait_for_completion_interruptible(&us->cmnd_ready)) 272 break; 273 274 US_DEBUGP("*** thread awakened.\n"); 275 276 /* lock the device pointers */ 277 mutex_lock(&(us->dev_mutex)); 278 279 /* lock access to the state */ 280 scsi_lock(host); 281 282 /* When we are called with no command pending, we're done */ 283 if (us->srb == NULL) { 284 scsi_unlock(host); 285 mutex_unlock(&us->dev_mutex); 286 US_DEBUGP("-- exiting\n"); 287 break; 288 } 289 290 /* has the command timed out *already* ? */ 291 if (test_bit(US_FLIDX_TIMED_OUT, &us->dflags)) { 292 us->srb->result = DID_ABORT << 16; 293 goto SkipForAbort; 294 } 295 296 scsi_unlock(host); 297 298 /* reject the command if the direction indicator 299 * is UNKNOWN 300 */ 301 if (us->srb->sc_data_direction == DMA_BIDIRECTIONAL) { 302 US_DEBUGP("UNKNOWN data direction\n"); 303 us->srb->result = DID_ERROR << 16; 304 } 305 306 /* reject if target != 0 or if LUN is higher than 307 * the maximum known LUN 308 */ 309 else if (us->srb->device->id && 310 !(us->fflags & US_FL_SCM_MULT_TARG)) { 311 US_DEBUGP("Bad target number (%d:%d)\n", 312 us->srb->device->id, us->srb->device->lun); 313 us->srb->result = DID_BAD_TARGET << 16; 314 } 315 316 else if (us->srb->device->lun > us->max_lun) { 317 US_DEBUGP("Bad LUN (%d:%d)\n", 318 us->srb->device->id, us->srb->device->lun); 319 us->srb->result = DID_BAD_TARGET << 16; 320 } 321 322 /* Handle those devices which need us to fake 323 * their inquiry data */ 324 else if ((us->srb->cmnd[0] == INQUIRY) && 325 (us->fflags & US_FL_FIX_INQUIRY)) { 326 unsigned char data_ptr[36] = { 327 0x00, 0x80, 0x02, 0x02, 328 0x1F, 0x00, 0x00, 0x00}; 329 330 US_DEBUGP("Faking INQUIRY command\n"); 331 fill_inquiry_response(us, data_ptr, 36); 332 us->srb->result = SAM_STAT_GOOD; 333 } 334 335 /* we've got a command, let's do it! */ 336 else { 337 US_DEBUG(usb_stor_show_command(us->srb)); 338 us->proto_handler(us->srb, us); 339 usb_mark_last_busy(us->pusb_dev); 340 } 341 342 /* lock access to the state */ 343 scsi_lock(host); 344 345 /* indicate that the command is done */ 346 if (us->srb->result != DID_ABORT << 16) { 347 US_DEBUGP("scsi cmd done, result=0x%x\n", 348 us->srb->result); 349 us->srb->scsi_done(us->srb); 350 } else { 351 SkipForAbort: 352 US_DEBUGP("scsi command aborted\n"); 353 } 354 355 /* If an abort request was received we need to signal that 356 * the abort has finished. The proper test for this is 357 * the TIMED_OUT flag, not srb->result == DID_ABORT, because 358 * the timeout might have occurred after the command had 359 * already completed with a different result code. */ 360 if (test_bit(US_FLIDX_TIMED_OUT, &us->dflags)) { 361 complete(&(us->notify)); 362 363 /* Allow USB transfers to resume */ 364 clear_bit(US_FLIDX_ABORTING, &us->dflags); 365 clear_bit(US_FLIDX_TIMED_OUT, &us->dflags); 366 } 367 368 /* finished working on this command */ 369 us->srb = NULL; 370 scsi_unlock(host); 371 372 /* unlock the device pointers */ 373 mutex_unlock(&us->dev_mutex); 374 } /* for (;;) */ 375 376 /* Wait until we are told to stop */ 377 for (;;) { 378 set_current_state(TASK_INTERRUPTIBLE); 379 if (kthread_should_stop()) 380 break; 381 schedule(); 382 } 383 __set_current_state(TASK_RUNNING); 384 return 0; 385 } 386 387 /*********************************************************************** 388 * Device probing and disconnecting 389 ***********************************************************************/ 390 391 /* Associate our private data with the USB device */ 392 static int associate_dev(struct us_data *us, struct usb_interface *intf) 393 { 394 US_DEBUGP("-- %s\n", __func__); 395 396 /* Fill in the device-related fields */ 397 us->pusb_dev = interface_to_usbdev(intf); 398 us->pusb_intf = intf; 399 us->ifnum = intf->cur_altsetting->desc.bInterfaceNumber; 400 US_DEBUGP("Vendor: 0x%04x, Product: 0x%04x, Revision: 0x%04x\n", 401 le16_to_cpu(us->pusb_dev->descriptor.idVendor), 402 le16_to_cpu(us->pusb_dev->descriptor.idProduct), 403 le16_to_cpu(us->pusb_dev->descriptor.bcdDevice)); 404 US_DEBUGP("Interface Subclass: 0x%02x, Protocol: 0x%02x\n", 405 intf->cur_altsetting->desc.bInterfaceSubClass, 406 intf->cur_altsetting->desc.bInterfaceProtocol); 407 408 /* Store our private data in the interface */ 409 usb_set_intfdata(intf, us); 410 411 /* Allocate the control/setup and DMA-mapped buffers */ 412 us->cr = kmalloc(sizeof(*us->cr), GFP_KERNEL); 413 if (!us->cr) { 414 US_DEBUGP("usb_ctrlrequest allocation failed\n"); 415 return -ENOMEM; 416 } 417 418 us->iobuf = usb_alloc_coherent(us->pusb_dev, US_IOBUF_SIZE, 419 GFP_KERNEL, &us->iobuf_dma); 420 if (!us->iobuf) { 421 US_DEBUGP("I/O buffer allocation failed\n"); 422 return -ENOMEM; 423 } 424 return 0; 425 } 426 427 /* Works only for digits and letters, but small and fast */ 428 #define TOLOWER(x) ((x) | 0x20) 429 430 /* Adjust device flags based on the "quirks=" module parameter */ 431 static void adjust_quirks(struct us_data *us) 432 { 433 char *p; 434 u16 vid = le16_to_cpu(us->pusb_dev->descriptor.idVendor); 435 u16 pid = le16_to_cpu(us->pusb_dev->descriptor.idProduct); 436 unsigned f = 0; 437 unsigned int mask = (US_FL_SANE_SENSE | US_FL_BAD_SENSE | 438 US_FL_FIX_CAPACITY | 439 US_FL_CAPACITY_HEURISTICS | US_FL_IGNORE_DEVICE | 440 US_FL_NOT_LOCKABLE | US_FL_MAX_SECTORS_64 | 441 US_FL_CAPACITY_OK | US_FL_IGNORE_RESIDUE | 442 US_FL_SINGLE_LUN | US_FL_NO_WP_DETECT | 443 US_FL_NO_READ_DISC_INFO | US_FL_NO_READ_CAPACITY_16 | 444 US_FL_INITIAL_READ10); 445 446 p = quirks; 447 while (*p) { 448 /* Each entry consists of VID:PID:flags */ 449 if (vid == simple_strtoul(p, &p, 16) && 450 *p == ':' && 451 pid == simple_strtoul(p+1, &p, 16) && 452 *p == ':') 453 break; 454 455 /* Move forward to the next entry */ 456 while (*p) { 457 if (*p++ == ',') 458 break; 459 } 460 } 461 if (!*p) /* No match */ 462 return; 463 464 /* Collect the flags */ 465 while (*++p && *p != ',') { 466 switch (TOLOWER(*p)) { 467 case 'a': 468 f |= US_FL_SANE_SENSE; 469 break; 470 case 'b': 471 f |= US_FL_BAD_SENSE; 472 break; 473 case 'c': 474 f |= US_FL_FIX_CAPACITY; 475 break; 476 case 'd': 477 f |= US_FL_NO_READ_DISC_INFO; 478 break; 479 case 'e': 480 f |= US_FL_NO_READ_CAPACITY_16; 481 break; 482 case 'h': 483 f |= US_FL_CAPACITY_HEURISTICS; 484 break; 485 case 'i': 486 f |= US_FL_IGNORE_DEVICE; 487 break; 488 case 'l': 489 f |= US_FL_NOT_LOCKABLE; 490 break; 491 case 'm': 492 f |= US_FL_MAX_SECTORS_64; 493 break; 494 case 'n': 495 f |= US_FL_INITIAL_READ10; 496 break; 497 case 'o': 498 f |= US_FL_CAPACITY_OK; 499 break; 500 case 'r': 501 f |= US_FL_IGNORE_RESIDUE; 502 break; 503 case 's': 504 f |= US_FL_SINGLE_LUN; 505 break; 506 case 'w': 507 f |= US_FL_NO_WP_DETECT; 508 break; 509 /* Ignore unrecognized flag characters */ 510 } 511 } 512 us->fflags = (us->fflags & ~mask) | f; 513 } 514 515 /* Get the unusual_devs entries and the string descriptors */ 516 static int get_device_info(struct us_data *us, const struct usb_device_id *id, 517 struct us_unusual_dev *unusual_dev) 518 { 519 struct usb_device *dev = us->pusb_dev; 520 struct usb_interface_descriptor *idesc = 521 &us->pusb_intf->cur_altsetting->desc; 522 struct device *pdev = &us->pusb_intf->dev; 523 524 /* Store the entries */ 525 us->unusual_dev = unusual_dev; 526 us->subclass = (unusual_dev->useProtocol == USB_SC_DEVICE) ? 527 idesc->bInterfaceSubClass : 528 unusual_dev->useProtocol; 529 us->protocol = (unusual_dev->useTransport == USB_PR_DEVICE) ? 530 idesc->bInterfaceProtocol : 531 unusual_dev->useTransport; 532 us->fflags = USB_US_ORIG_FLAGS(id->driver_info); 533 adjust_quirks(us); 534 535 if (us->fflags & US_FL_IGNORE_DEVICE) { 536 dev_info(pdev, "device ignored\n"); 537 return -ENODEV; 538 } 539 540 /* 541 * This flag is only needed when we're in high-speed, so let's 542 * disable it if we're in full-speed 543 */ 544 if (dev->speed != USB_SPEED_HIGH) 545 us->fflags &= ~US_FL_GO_SLOW; 546 547 if (us->fflags) 548 dev_info(pdev, "Quirks match for vid %04x pid %04x: %lx\n", 549 le16_to_cpu(dev->descriptor.idVendor), 550 le16_to_cpu(dev->descriptor.idProduct), 551 us->fflags); 552 553 /* Log a message if a non-generic unusual_dev entry contains an 554 * unnecessary subclass or protocol override. This may stimulate 555 * reports from users that will help us remove unneeded entries 556 * from the unusual_devs.h table. 557 */ 558 if (id->idVendor || id->idProduct) { 559 static const char *msgs[3] = { 560 "an unneeded SubClass entry", 561 "an unneeded Protocol entry", 562 "unneeded SubClass and Protocol entries"}; 563 struct usb_device_descriptor *ddesc = &dev->descriptor; 564 int msg = -1; 565 566 if (unusual_dev->useProtocol != USB_SC_DEVICE && 567 us->subclass == idesc->bInterfaceSubClass) 568 msg += 1; 569 if (unusual_dev->useTransport != USB_PR_DEVICE && 570 us->protocol == idesc->bInterfaceProtocol) 571 msg += 2; 572 if (msg >= 0 && !(us->fflags & US_FL_NEED_OVERRIDE)) 573 dev_notice(pdev, "This device " 574 "(%04x,%04x,%04x S %02x P %02x)" 575 " has %s in unusual_devs.h (kernel" 576 " %s)\n" 577 " Please send a copy of this message to " 578 "<linux-usb@vger.kernel.org> and " 579 "<usb-storage@lists.one-eyed-alien.net>\n", 580 le16_to_cpu(ddesc->idVendor), 581 le16_to_cpu(ddesc->idProduct), 582 le16_to_cpu(ddesc->bcdDevice), 583 idesc->bInterfaceSubClass, 584 idesc->bInterfaceProtocol, 585 msgs[msg], 586 utsname()->release); 587 } 588 589 return 0; 590 } 591 592 /* Get the transport settings */ 593 static void get_transport(struct us_data *us) 594 { 595 switch (us->protocol) { 596 case USB_PR_CB: 597 us->transport_name = "Control/Bulk"; 598 us->transport = usb_stor_CB_transport; 599 us->transport_reset = usb_stor_CB_reset; 600 us->max_lun = 7; 601 break; 602 603 case USB_PR_CBI: 604 us->transport_name = "Control/Bulk/Interrupt"; 605 us->transport = usb_stor_CB_transport; 606 us->transport_reset = usb_stor_CB_reset; 607 us->max_lun = 7; 608 break; 609 610 case USB_PR_BULK: 611 us->transport_name = "Bulk"; 612 us->transport = usb_stor_Bulk_transport; 613 us->transport_reset = usb_stor_Bulk_reset; 614 break; 615 } 616 } 617 618 /* Get the protocol settings */ 619 static void get_protocol(struct us_data *us) 620 { 621 switch (us->subclass) { 622 case USB_SC_RBC: 623 us->protocol_name = "Reduced Block Commands (RBC)"; 624 us->proto_handler = usb_stor_transparent_scsi_command; 625 break; 626 627 case USB_SC_8020: 628 us->protocol_name = "8020i"; 629 us->proto_handler = usb_stor_pad12_command; 630 us->max_lun = 0; 631 break; 632 633 case USB_SC_QIC: 634 us->protocol_name = "QIC-157"; 635 us->proto_handler = usb_stor_pad12_command; 636 us->max_lun = 0; 637 break; 638 639 case USB_SC_8070: 640 us->protocol_name = "8070i"; 641 us->proto_handler = usb_stor_pad12_command; 642 us->max_lun = 0; 643 break; 644 645 case USB_SC_SCSI: 646 us->protocol_name = "Transparent SCSI"; 647 us->proto_handler = usb_stor_transparent_scsi_command; 648 break; 649 650 case USB_SC_UFI: 651 us->protocol_name = "Uniform Floppy Interface (UFI)"; 652 us->proto_handler = usb_stor_ufi_command; 653 break; 654 } 655 } 656 657 /* Get the pipe settings */ 658 static int get_pipes(struct us_data *us) 659 { 660 struct usb_host_interface *altsetting = 661 us->pusb_intf->cur_altsetting; 662 int i; 663 struct usb_endpoint_descriptor *ep; 664 struct usb_endpoint_descriptor *ep_in = NULL; 665 struct usb_endpoint_descriptor *ep_out = NULL; 666 struct usb_endpoint_descriptor *ep_int = NULL; 667 668 /* 669 * Find the first endpoint of each type we need. 670 * We are expecting a minimum of 2 endpoints - in and out (bulk). 671 * An optional interrupt-in is OK (necessary for CBI protocol). 672 * We will ignore any others. 673 */ 674 for (i = 0; i < altsetting->desc.bNumEndpoints; i++) { 675 ep = &altsetting->endpoint[i].desc; 676 677 if (usb_endpoint_xfer_bulk(ep)) { 678 if (usb_endpoint_dir_in(ep)) { 679 if (!ep_in) 680 ep_in = ep; 681 } else { 682 if (!ep_out) 683 ep_out = ep; 684 } 685 } 686 687 else if (usb_endpoint_is_int_in(ep)) { 688 if (!ep_int) 689 ep_int = ep; 690 } 691 } 692 693 if (!ep_in || !ep_out || (us->protocol == USB_PR_CBI && !ep_int)) { 694 US_DEBUGP("Endpoint sanity check failed! Rejecting dev.\n"); 695 return -EIO; 696 } 697 698 /* Calculate and store the pipe values */ 699 us->send_ctrl_pipe = usb_sndctrlpipe(us->pusb_dev, 0); 700 us->recv_ctrl_pipe = usb_rcvctrlpipe(us->pusb_dev, 0); 701 us->send_bulk_pipe = usb_sndbulkpipe(us->pusb_dev, 702 usb_endpoint_num(ep_out)); 703 us->recv_bulk_pipe = usb_rcvbulkpipe(us->pusb_dev, 704 usb_endpoint_num(ep_in)); 705 if (ep_int) { 706 us->recv_intr_pipe = usb_rcvintpipe(us->pusb_dev, 707 usb_endpoint_num(ep_int)); 708 us->ep_bInterval = ep_int->bInterval; 709 } 710 return 0; 711 } 712 713 /* Initialize all the dynamic resources we need */ 714 static int usb_stor_acquire_resources(struct us_data *us) 715 { 716 int p; 717 struct task_struct *th; 718 719 us->current_urb = usb_alloc_urb(0, GFP_KERNEL); 720 if (!us->current_urb) { 721 US_DEBUGP("URB allocation failed\n"); 722 return -ENOMEM; 723 } 724 725 /* Just before we start our control thread, initialize 726 * the device if it needs initialization */ 727 if (us->unusual_dev->initFunction) { 728 p = us->unusual_dev->initFunction(us); 729 if (p) 730 return p; 731 } 732 733 /* Start up our control thread */ 734 th = kthread_run(usb_stor_control_thread, us, "usb-storage"); 735 if (IS_ERR(th)) { 736 dev_warn(&us->pusb_intf->dev, 737 "Unable to start control thread\n"); 738 return PTR_ERR(th); 739 } 740 us->ctl_thread = th; 741 742 return 0; 743 } 744 745 /* Release all our dynamic resources */ 746 static void usb_stor_release_resources(struct us_data *us) 747 { 748 US_DEBUGP("-- %s\n", __func__); 749 750 /* Tell the control thread to exit. The SCSI host must 751 * already have been removed and the DISCONNECTING flag set 752 * so that we won't accept any more commands. 753 */ 754 US_DEBUGP("-- sending exit command to thread\n"); 755 complete(&us->cmnd_ready); 756 if (us->ctl_thread) 757 kthread_stop(us->ctl_thread); 758 759 /* Call the destructor routine, if it exists */ 760 if (us->extra_destructor) { 761 US_DEBUGP("-- calling extra_destructor()\n"); 762 us->extra_destructor(us->extra); 763 } 764 765 /* Free the extra data and the URB */ 766 kfree(us->extra); 767 usb_free_urb(us->current_urb); 768 } 769 770 /* Dissociate from the USB device */ 771 static void dissociate_dev(struct us_data *us) 772 { 773 US_DEBUGP("-- %s\n", __func__); 774 775 /* Free the buffers */ 776 kfree(us->cr); 777 usb_free_coherent(us->pusb_dev, US_IOBUF_SIZE, us->iobuf, us->iobuf_dma); 778 779 /* Remove our private data from the interface */ 780 usb_set_intfdata(us->pusb_intf, NULL); 781 } 782 783 /* First stage of disconnect processing: stop SCSI scanning, 784 * remove the host, and stop accepting new commands 785 */ 786 static void quiesce_and_remove_host(struct us_data *us) 787 { 788 struct Scsi_Host *host = us_to_host(us); 789 790 /* If the device is really gone, cut short reset delays */ 791 if (us->pusb_dev->state == USB_STATE_NOTATTACHED) 792 set_bit(US_FLIDX_DISCONNECTING, &us->dflags); 793 794 /* Prevent SCSI-scanning (if it hasn't started yet) 795 * and wait for the SCSI-scanning thread to stop. 796 */ 797 set_bit(US_FLIDX_DONT_SCAN, &us->dflags); 798 wake_up(&us->delay_wait); 799 wait_for_completion(&us->scanning_done); 800 801 /* Removing the host will perform an orderly shutdown: caches 802 * synchronized, disks spun down, etc. 803 */ 804 scsi_remove_host(host); 805 806 /* Prevent any new commands from being accepted and cut short 807 * reset delays. 808 */ 809 scsi_lock(host); 810 set_bit(US_FLIDX_DISCONNECTING, &us->dflags); 811 scsi_unlock(host); 812 wake_up(&us->delay_wait); 813 } 814 815 /* Second stage of disconnect processing: deallocate all resources */ 816 static void release_everything(struct us_data *us) 817 { 818 usb_stor_release_resources(us); 819 dissociate_dev(us); 820 821 /* Drop our reference to the host; the SCSI core will free it 822 * (and "us" along with it) when the refcount becomes 0. */ 823 scsi_host_put(us_to_host(us)); 824 } 825 826 /* Thread to carry out delayed SCSI-device scanning */ 827 static int usb_stor_scan_thread(void * __us) 828 { 829 struct us_data *us = (struct us_data *)__us; 830 struct device *dev = &us->pusb_intf->dev; 831 832 dev_dbg(dev, "device found\n"); 833 834 set_freezable(); 835 /* Wait for the timeout to expire or for a disconnect */ 836 if (delay_use > 0) { 837 dev_dbg(dev, "waiting for device to settle " 838 "before scanning\n"); 839 wait_event_freezable_timeout(us->delay_wait, 840 test_bit(US_FLIDX_DONT_SCAN, &us->dflags), 841 delay_use * HZ); 842 } 843 844 /* If the device is still connected, perform the scanning */ 845 if (!test_bit(US_FLIDX_DONT_SCAN, &us->dflags)) { 846 847 /* For bulk-only devices, determine the max LUN value */ 848 if (us->protocol == USB_PR_BULK && 849 !(us->fflags & US_FL_SINGLE_LUN)) { 850 mutex_lock(&us->dev_mutex); 851 us->max_lun = usb_stor_Bulk_max_lun(us); 852 mutex_unlock(&us->dev_mutex); 853 } 854 scsi_scan_host(us_to_host(us)); 855 dev_dbg(dev, "scan complete\n"); 856 857 /* Should we unbind if no devices were detected? */ 858 } 859 860 usb_autopm_put_interface(us->pusb_intf); 861 complete_and_exit(&us->scanning_done, 0); 862 } 863 864 static unsigned int usb_stor_sg_tablesize(struct usb_interface *intf) 865 { 866 struct usb_device *usb_dev = interface_to_usbdev(intf); 867 868 if (usb_dev->bus->sg_tablesize) { 869 return usb_dev->bus->sg_tablesize; 870 } 871 return SG_ALL; 872 } 873 874 /* First part of general USB mass-storage probing */ 875 int usb_stor_probe1(struct us_data **pus, 876 struct usb_interface *intf, 877 const struct usb_device_id *id, 878 struct us_unusual_dev *unusual_dev) 879 { 880 struct Scsi_Host *host; 881 struct us_data *us; 882 int result; 883 884 US_DEBUGP("USB Mass Storage device detected\n"); 885 886 /* 887 * Ask the SCSI layer to allocate a host structure, with extra 888 * space at the end for our private us_data structure. 889 */ 890 host = scsi_host_alloc(&usb_stor_host_template, sizeof(*us)); 891 if (!host) { 892 dev_warn(&intf->dev, 893 "Unable to allocate the scsi host\n"); 894 return -ENOMEM; 895 } 896 897 /* 898 * Allow 16-byte CDBs and thus > 2TB 899 */ 900 host->max_cmd_len = 16; 901 host->sg_tablesize = usb_stor_sg_tablesize(intf); 902 *pus = us = host_to_us(host); 903 memset(us, 0, sizeof(struct us_data)); 904 mutex_init(&(us->dev_mutex)); 905 init_completion(&us->cmnd_ready); 906 init_completion(&(us->notify)); 907 init_waitqueue_head(&us->delay_wait); 908 init_completion(&us->scanning_done); 909 910 /* Associate the us_data structure with the USB device */ 911 result = associate_dev(us, intf); 912 if (result) 913 goto BadDevice; 914 915 /* Get the unusual_devs entries and the descriptors */ 916 result = get_device_info(us, id, unusual_dev); 917 if (result) 918 goto BadDevice; 919 920 /* Get standard transport and protocol settings */ 921 get_transport(us); 922 get_protocol(us); 923 924 /* Give the caller a chance to fill in specialized transport 925 * or protocol settings. 926 */ 927 return 0; 928 929 BadDevice: 930 US_DEBUGP("storage_probe() failed\n"); 931 release_everything(us); 932 return result; 933 } 934 EXPORT_SYMBOL_GPL(usb_stor_probe1); 935 936 /* Second part of general USB mass-storage probing */ 937 int usb_stor_probe2(struct us_data *us) 938 { 939 struct task_struct *th; 940 int result; 941 struct device *dev = &us->pusb_intf->dev; 942 943 /* Make sure the transport and protocol have both been set */ 944 if (!us->transport || !us->proto_handler) { 945 result = -ENXIO; 946 goto BadDevice; 947 } 948 US_DEBUGP("Transport: %s\n", us->transport_name); 949 US_DEBUGP("Protocol: %s\n", us->protocol_name); 950 951 /* fix for single-lun devices */ 952 if (us->fflags & US_FL_SINGLE_LUN) 953 us->max_lun = 0; 954 955 /* Find the endpoints and calculate pipe values */ 956 result = get_pipes(us); 957 if (result) 958 goto BadDevice; 959 960 /* 961 * If the device returns invalid data for the first READ(10) 962 * command, indicate the command should be retried. 963 */ 964 if (us->fflags & US_FL_INITIAL_READ10) 965 set_bit(US_FLIDX_REDO_READ10, &us->dflags); 966 967 /* Acquire all the other resources and add the host */ 968 result = usb_stor_acquire_resources(us); 969 if (result) 970 goto BadDevice; 971 snprintf(us->scsi_name, sizeof(us->scsi_name), "usb-storage %s", 972 dev_name(&us->pusb_intf->dev)); 973 result = scsi_add_host(us_to_host(us), dev); 974 if (result) { 975 dev_warn(dev, 976 "Unable to add the scsi host\n"); 977 goto BadDevice; 978 } 979 980 /* Start up the thread for delayed SCSI-device scanning */ 981 th = kthread_create(usb_stor_scan_thread, us, "usb-stor-scan"); 982 if (IS_ERR(th)) { 983 dev_warn(dev, 984 "Unable to start the device-scanning thread\n"); 985 complete(&us->scanning_done); 986 quiesce_and_remove_host(us); 987 result = PTR_ERR(th); 988 goto BadDevice; 989 } 990 991 usb_autopm_get_interface_no_resume(us->pusb_intf); 992 wake_up_process(th); 993 994 return 0; 995 996 /* We come here if there are any problems */ 997 BadDevice: 998 US_DEBUGP("storage_probe() failed\n"); 999 release_everything(us); 1000 return result; 1001 } 1002 EXPORT_SYMBOL_GPL(usb_stor_probe2); 1003 1004 /* Handle a USB mass-storage disconnect */ 1005 void usb_stor_disconnect(struct usb_interface *intf) 1006 { 1007 struct us_data *us = usb_get_intfdata(intf); 1008 1009 US_DEBUGP("storage_disconnect() called\n"); 1010 quiesce_and_remove_host(us); 1011 release_everything(us); 1012 } 1013 EXPORT_SYMBOL_GPL(usb_stor_disconnect); 1014 1015 /* The main probe routine for standard devices */ 1016 static int storage_probe(struct usb_interface *intf, 1017 const struct usb_device_id *id) 1018 { 1019 struct us_data *us; 1020 int result; 1021 1022 /* 1023 * If libusual is configured, let it decide whether a standard 1024 * device should be handled by usb-storage or by ub. 1025 * If the device isn't standard (is handled by a subdriver 1026 * module) then don't accept it. 1027 */ 1028 if (usb_usual_check_type(id, USB_US_TYPE_STOR) || 1029 usb_usual_ignore_device(intf)) 1030 return -ENXIO; 1031 1032 /* 1033 * Call the general probe procedures. 1034 * 1035 * The unusual_dev_list array is parallel to the usb_storage_usb_ids 1036 * table, so we use the index of the id entry to find the 1037 * corresponding unusual_devs entry. 1038 */ 1039 result = usb_stor_probe1(&us, intf, id, 1040 (id - usb_storage_usb_ids) + us_unusual_dev_list); 1041 if (result) 1042 return result; 1043 1044 /* No special transport or protocol settings in the main module */ 1045 1046 result = usb_stor_probe2(us); 1047 return result; 1048 } 1049 1050 /*********************************************************************** 1051 * Initialization and registration 1052 ***********************************************************************/ 1053 1054 static struct usb_driver usb_storage_driver = { 1055 .name = "usb-storage", 1056 .probe = storage_probe, 1057 .disconnect = usb_stor_disconnect, 1058 .suspend = usb_stor_suspend, 1059 .resume = usb_stor_resume, 1060 .reset_resume = usb_stor_reset_resume, 1061 .pre_reset = usb_stor_pre_reset, 1062 .post_reset = usb_stor_post_reset, 1063 .id_table = usb_storage_usb_ids, 1064 .supports_autosuspend = 1, 1065 .soft_unbind = 1, 1066 }; 1067 1068 static int __init usb_stor_init(void) 1069 { 1070 int retval; 1071 1072 pr_info("Initializing USB Mass Storage driver...\n"); 1073 1074 /* register the driver, return usb_register return code if error */ 1075 retval = usb_register(&usb_storage_driver); 1076 if (retval == 0) { 1077 pr_info("USB Mass Storage support registered.\n"); 1078 usb_usual_set_present(USB_US_TYPE_STOR); 1079 } 1080 return retval; 1081 } 1082 1083 static void __exit usb_stor_exit(void) 1084 { 1085 US_DEBUGP("usb_stor_exit() called\n"); 1086 1087 /* Deregister the driver 1088 * This will cause disconnect() to be called for each 1089 * attached unit 1090 */ 1091 US_DEBUGP("-- calling usb_deregister()\n"); 1092 usb_deregister(&usb_storage_driver) ; 1093 1094 usb_usual_clear_present(USB_US_TYPE_STOR); 1095 } 1096 1097 module_init(usb_stor_init); 1098 module_exit(usb_stor_exit); 1099