1 /* 2 * Universal Host Controller Interface driver for USB. 3 * 4 * Maintainer: Alan Stern <stern@rowland.harvard.edu> 5 * 6 * (C) Copyright 1999 Linus Torvalds 7 * (C) Copyright 1999-2002 Johannes Erdfelt, johannes@erdfelt.com 8 * (C) Copyright 1999 Randy Dunlap 9 * (C) Copyright 1999 Georg Acher, acher@in.tum.de 10 * (C) Copyright 1999 Deti Fliegl, deti@fliegl.de 11 * (C) Copyright 1999 Thomas Sailer, sailer@ife.ee.ethz.ch 12 * (C) Copyright 2004 Alan Stern, stern@rowland.harvard.edu 13 */ 14 15 static const __u8 root_hub_hub_des[] = 16 { 17 0x09, /* __u8 bLength; */ 18 0x29, /* __u8 bDescriptorType; Hub-descriptor */ 19 0x02, /* __u8 bNbrPorts; */ 20 0x0a, /* __u16 wHubCharacteristics; */ 21 0x00, /* (per-port OC, no power switching) */ 22 0x01, /* __u8 bPwrOn2pwrGood; 2ms */ 23 0x00, /* __u8 bHubContrCurrent; 0 mA */ 24 0x00, /* __u8 DeviceRemovable; *** 7 Ports max *** */ 25 0xff /* __u8 PortPwrCtrlMask; *** 7 ports max *** */ 26 }; 27 28 #define UHCI_RH_MAXCHILD 7 29 30 /* must write as zeroes */ 31 #define WZ_BITS (USBPORTSC_RES2 | USBPORTSC_RES3 | USBPORTSC_RES4) 32 33 /* status change bits: nonzero writes will clear */ 34 #define RWC_BITS (USBPORTSC_OCC | USBPORTSC_PEC | USBPORTSC_CSC) 35 36 /* suspend/resume bits: port suspended or port resuming */ 37 #define SUSPEND_BITS (USBPORTSC_SUSP | USBPORTSC_RD) 38 39 /* A port that either is connected or has a changed-bit set will prevent 40 * us from AUTO_STOPPING. 41 */ 42 static int any_ports_active(struct uhci_hcd *uhci) 43 { 44 int port; 45 46 for (port = 0; port < uhci->rh_numports; ++port) { 47 if ((uhci_readw(uhci, USBPORTSC1 + port * 2) & 48 (USBPORTSC_CCS | RWC_BITS)) || 49 test_bit(port, &uhci->port_c_suspend)) 50 return 1; 51 } 52 return 0; 53 } 54 55 static inline int get_hub_status_data(struct uhci_hcd *uhci, char *buf) 56 { 57 int port; 58 int mask = RWC_BITS; 59 60 /* Some boards (both VIA and Intel apparently) report bogus 61 * overcurrent indications, causing massive log spam unless 62 * we completely ignore them. This doesn't seem to be a problem 63 * with the chipset so much as with the way it is connected on 64 * the motherboard; if the overcurrent input is left to float 65 * then it may constantly register false positives. */ 66 if (ignore_oc) 67 mask &= ~USBPORTSC_OCC; 68 69 *buf = 0; 70 for (port = 0; port < uhci->rh_numports; ++port) { 71 if ((uhci_readw(uhci, USBPORTSC1 + port * 2) & mask) || 72 test_bit(port, &uhci->port_c_suspend)) 73 *buf |= (1 << (port + 1)); 74 } 75 return !!*buf; 76 } 77 78 #define OK(x) len = (x); break 79 80 #define CLR_RH_PORTSTAT(x) \ 81 status = uhci_readw(uhci, port_addr); \ 82 status &= ~(RWC_BITS|WZ_BITS); \ 83 status &= ~(x); \ 84 status |= RWC_BITS & (x); \ 85 uhci_writew(uhci, status, port_addr) 86 87 #define SET_RH_PORTSTAT(x) \ 88 status = uhci_readw(uhci, port_addr); \ 89 status |= (x); \ 90 status &= ~(RWC_BITS|WZ_BITS); \ 91 uhci_writew(uhci, status, port_addr) 92 93 /* UHCI controllers don't automatically stop resume signalling after 20 msec, 94 * so we have to poll and check timeouts in order to take care of it. 95 */ 96 static void uhci_finish_suspend(struct uhci_hcd *uhci, int port, 97 unsigned long port_addr) 98 { 99 int status; 100 int i; 101 102 if (uhci_readw(uhci, port_addr) & SUSPEND_BITS) { 103 CLR_RH_PORTSTAT(SUSPEND_BITS); 104 if (test_bit(port, &uhci->resuming_ports)) 105 set_bit(port, &uhci->port_c_suspend); 106 107 /* The controller won't actually turn off the RD bit until 108 * it has had a chance to send a low-speed EOP sequence, 109 * which is supposed to take 3 bit times (= 2 microseconds). 110 * Experiments show that some controllers take longer, so 111 * we'll poll for completion. */ 112 for (i = 0; i < 10; ++i) { 113 if (!(uhci_readw(uhci, port_addr) & SUSPEND_BITS)) 114 break; 115 udelay(1); 116 } 117 } 118 clear_bit(port, &uhci->resuming_ports); 119 } 120 121 /* Wait for the UHCI controller in HP's iLO2 server management chip. 122 * It can take up to 250 us to finish a reset and set the CSC bit. 123 */ 124 static void wait_for_HP(struct uhci_hcd *uhci, unsigned long port_addr) 125 { 126 int i; 127 128 for (i = 10; i < 250; i += 10) { 129 if (uhci_readw(uhci, port_addr) & USBPORTSC_CSC) 130 return; 131 udelay(10); 132 } 133 /* Log a warning? */ 134 } 135 136 static void uhci_check_ports(struct uhci_hcd *uhci) 137 { 138 unsigned int port; 139 unsigned long port_addr; 140 int status; 141 142 for (port = 0; port < uhci->rh_numports; ++port) { 143 port_addr = USBPORTSC1 + 2 * port; 144 status = uhci_readw(uhci, port_addr); 145 if (unlikely(status & USBPORTSC_PR)) { 146 if (time_after_eq(jiffies, uhci->ports_timeout)) { 147 CLR_RH_PORTSTAT(USBPORTSC_PR); 148 udelay(10); 149 150 /* HP's server management chip requires 151 * a longer delay. */ 152 if (uhci->wait_for_hp) 153 wait_for_HP(uhci, port_addr); 154 155 /* If the port was enabled before, turning 156 * reset on caused a port enable change. 157 * Turning reset off causes a port connect 158 * status change. Clear these changes. */ 159 CLR_RH_PORTSTAT(USBPORTSC_CSC | USBPORTSC_PEC); 160 SET_RH_PORTSTAT(USBPORTSC_PE); 161 } 162 } 163 if (unlikely(status & USBPORTSC_RD)) { 164 if (!test_bit(port, &uhci->resuming_ports)) { 165 166 /* Port received a wakeup request */ 167 set_bit(port, &uhci->resuming_ports); 168 uhci->ports_timeout = jiffies + 169 msecs_to_jiffies(25); 170 171 /* Make sure we see the port again 172 * after the resuming period is over. */ 173 mod_timer(&uhci_to_hcd(uhci)->rh_timer, 174 uhci->ports_timeout); 175 } else if (time_after_eq(jiffies, 176 uhci->ports_timeout)) { 177 uhci_finish_suspend(uhci, port, port_addr); 178 } 179 } 180 } 181 } 182 183 static int uhci_hub_status_data(struct usb_hcd *hcd, char *buf) 184 { 185 struct uhci_hcd *uhci = hcd_to_uhci(hcd); 186 unsigned long flags; 187 int status = 0; 188 189 spin_lock_irqsave(&uhci->lock, flags); 190 191 uhci_scan_schedule(uhci); 192 if (!HCD_HW_ACCESSIBLE(hcd) || uhci->dead) 193 goto done; 194 uhci_check_ports(uhci); 195 196 status = get_hub_status_data(uhci, buf); 197 198 switch (uhci->rh_state) { 199 case UHCI_RH_SUSPENDED: 200 /* if port change, ask to be resumed */ 201 if (status || uhci->resuming_ports) { 202 status = 1; 203 usb_hcd_resume_root_hub(hcd); 204 } 205 break; 206 207 case UHCI_RH_AUTO_STOPPED: 208 /* if port change, auto start */ 209 if (status) 210 wakeup_rh(uhci); 211 break; 212 213 case UHCI_RH_RUNNING: 214 /* are any devices attached? */ 215 if (!any_ports_active(uhci)) { 216 uhci->rh_state = UHCI_RH_RUNNING_NODEVS; 217 uhci->auto_stop_time = jiffies + HZ; 218 } 219 break; 220 221 case UHCI_RH_RUNNING_NODEVS: 222 /* auto-stop if nothing connected for 1 second */ 223 if (any_ports_active(uhci)) 224 uhci->rh_state = UHCI_RH_RUNNING; 225 else if (time_after_eq(jiffies, uhci->auto_stop_time)) 226 suspend_rh(uhci, UHCI_RH_AUTO_STOPPED); 227 break; 228 229 default: 230 break; 231 } 232 233 done: 234 spin_unlock_irqrestore(&uhci->lock, flags); 235 return status; 236 } 237 238 /* size of returned buffer is part of USB spec */ 239 static int uhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, 240 u16 wIndex, char *buf, u16 wLength) 241 { 242 struct uhci_hcd *uhci = hcd_to_uhci(hcd); 243 int status, lstatus, retval = 0, len = 0; 244 unsigned int port = wIndex - 1; 245 unsigned long port_addr = USBPORTSC1 + 2 * port; 246 u16 wPortChange, wPortStatus; 247 unsigned long flags; 248 249 if (!HCD_HW_ACCESSIBLE(hcd) || uhci->dead) 250 return -ETIMEDOUT; 251 252 spin_lock_irqsave(&uhci->lock, flags); 253 switch (typeReq) { 254 255 case GetHubStatus: 256 *(__le32 *)buf = cpu_to_le32(0); 257 OK(4); /* hub power */ 258 case GetPortStatus: 259 if (port >= uhci->rh_numports) 260 goto err; 261 262 uhci_check_ports(uhci); 263 status = uhci_readw(uhci, port_addr); 264 265 /* Intel controllers report the OverCurrent bit active on. 266 * VIA controllers report it active off, so we'll adjust the 267 * bit value. (It's not standardized in the UHCI spec.) 268 */ 269 if (uhci->oc_low) 270 status ^= USBPORTSC_OC; 271 272 /* UHCI doesn't support C_RESET (always false) */ 273 wPortChange = lstatus = 0; 274 if (status & USBPORTSC_CSC) 275 wPortChange |= USB_PORT_STAT_C_CONNECTION; 276 if (status & USBPORTSC_PEC) 277 wPortChange |= USB_PORT_STAT_C_ENABLE; 278 if ((status & USBPORTSC_OCC) && !ignore_oc) 279 wPortChange |= USB_PORT_STAT_C_OVERCURRENT; 280 281 if (test_bit(port, &uhci->port_c_suspend)) { 282 wPortChange |= USB_PORT_STAT_C_SUSPEND; 283 lstatus |= 1; 284 } 285 if (test_bit(port, &uhci->resuming_ports)) 286 lstatus |= 4; 287 288 /* UHCI has no power switching (always on) */ 289 wPortStatus = USB_PORT_STAT_POWER; 290 if (status & USBPORTSC_CCS) 291 wPortStatus |= USB_PORT_STAT_CONNECTION; 292 if (status & USBPORTSC_PE) { 293 wPortStatus |= USB_PORT_STAT_ENABLE; 294 if (status & SUSPEND_BITS) 295 wPortStatus |= USB_PORT_STAT_SUSPEND; 296 } 297 if (status & USBPORTSC_OC) 298 wPortStatus |= USB_PORT_STAT_OVERCURRENT; 299 if (status & USBPORTSC_PR) 300 wPortStatus |= USB_PORT_STAT_RESET; 301 if (status & USBPORTSC_LSDA) 302 wPortStatus |= USB_PORT_STAT_LOW_SPEED; 303 304 if (wPortChange) 305 dev_dbg(uhci_dev(uhci), "port %d portsc %04x,%02x\n", 306 wIndex, status, lstatus); 307 308 *(__le16 *)buf = cpu_to_le16(wPortStatus); 309 *(__le16 *)(buf + 2) = cpu_to_le16(wPortChange); 310 OK(4); 311 case SetHubFeature: /* We don't implement these */ 312 case ClearHubFeature: 313 switch (wValue) { 314 case C_HUB_OVER_CURRENT: 315 case C_HUB_LOCAL_POWER: 316 OK(0); 317 default: 318 goto err; 319 } 320 break; 321 case SetPortFeature: 322 if (port >= uhci->rh_numports) 323 goto err; 324 325 switch (wValue) { 326 case USB_PORT_FEAT_SUSPEND: 327 SET_RH_PORTSTAT(USBPORTSC_SUSP); 328 OK(0); 329 case USB_PORT_FEAT_RESET: 330 SET_RH_PORTSTAT(USBPORTSC_PR); 331 332 /* Reset terminates Resume signalling */ 333 uhci_finish_suspend(uhci, port, port_addr); 334 335 /* USB v2.0 7.1.7.5 */ 336 uhci->ports_timeout = jiffies + msecs_to_jiffies(50); 337 OK(0); 338 case USB_PORT_FEAT_POWER: 339 /* UHCI has no power switching */ 340 OK(0); 341 default: 342 goto err; 343 } 344 break; 345 case ClearPortFeature: 346 if (port >= uhci->rh_numports) 347 goto err; 348 349 switch (wValue) { 350 case USB_PORT_FEAT_ENABLE: 351 CLR_RH_PORTSTAT(USBPORTSC_PE); 352 353 /* Disable terminates Resume signalling */ 354 uhci_finish_suspend(uhci, port, port_addr); 355 OK(0); 356 case USB_PORT_FEAT_C_ENABLE: 357 CLR_RH_PORTSTAT(USBPORTSC_PEC); 358 OK(0); 359 case USB_PORT_FEAT_SUSPEND: 360 if (!(uhci_readw(uhci, port_addr) & USBPORTSC_SUSP)) { 361 362 /* Make certain the port isn't suspended */ 363 uhci_finish_suspend(uhci, port, port_addr); 364 } else if (!test_and_set_bit(port, 365 &uhci->resuming_ports)) { 366 SET_RH_PORTSTAT(USBPORTSC_RD); 367 368 /* The controller won't allow RD to be set 369 * if the port is disabled. When this happens 370 * just skip the Resume signalling. 371 */ 372 if (!(uhci_readw(uhci, port_addr) & 373 USBPORTSC_RD)) 374 uhci_finish_suspend(uhci, port, 375 port_addr); 376 else 377 /* USB v2.0 7.1.7.7 */ 378 uhci->ports_timeout = jiffies + 379 msecs_to_jiffies(20); 380 } 381 OK(0); 382 case USB_PORT_FEAT_C_SUSPEND: 383 clear_bit(port, &uhci->port_c_suspend); 384 OK(0); 385 case USB_PORT_FEAT_POWER: 386 /* UHCI has no power switching */ 387 goto err; 388 case USB_PORT_FEAT_C_CONNECTION: 389 CLR_RH_PORTSTAT(USBPORTSC_CSC); 390 OK(0); 391 case USB_PORT_FEAT_C_OVER_CURRENT: 392 CLR_RH_PORTSTAT(USBPORTSC_OCC); 393 OK(0); 394 case USB_PORT_FEAT_C_RESET: 395 /* this driver won't report these */ 396 OK(0); 397 default: 398 goto err; 399 } 400 break; 401 case GetHubDescriptor: 402 len = min_t(unsigned int, sizeof(root_hub_hub_des), wLength); 403 memcpy(buf, root_hub_hub_des, len); 404 if (len > 2) 405 buf[2] = uhci->rh_numports; 406 OK(len); 407 default: 408 err: 409 retval = -EPIPE; 410 } 411 spin_unlock_irqrestore(&uhci->lock, flags); 412 413 return retval; 414 } 415