1 /* 2 * 3 * Includes for cdc-acm.c 4 * 5 * Mainly take from usbnet's cdc-ether part 6 * 7 */ 8 9 /* 10 * CMSPAR, some architectures can't have space and mark parity. 11 */ 12 13 #ifndef CMSPAR 14 #define CMSPAR 0 15 #endif 16 17 /* 18 * Major and minor numbers. 19 */ 20 21 #define ACM_TTY_MAJOR 166 22 #define ACM_TTY_MINORS 32 23 24 /* 25 * Requests. 26 */ 27 28 #define USB_RT_ACM (USB_TYPE_CLASS | USB_RECIP_INTERFACE) 29 30 /* 31 * Output control lines. 32 */ 33 34 #define ACM_CTRL_DTR 0x01 35 #define ACM_CTRL_RTS 0x02 36 37 /* 38 * Input control lines and line errors. 39 */ 40 41 #define ACM_CTRL_DCD 0x01 42 #define ACM_CTRL_DSR 0x02 43 #define ACM_CTRL_BRK 0x04 44 #define ACM_CTRL_RI 0x08 45 46 #define ACM_CTRL_FRAMING 0x10 47 #define ACM_CTRL_PARITY 0x20 48 #define ACM_CTRL_OVERRUN 0x40 49 50 /* 51 * Internal driver structures. 52 */ 53 54 /* 55 * The only reason to have several buffers is to accommodate assumptions 56 * in line disciplines. They ask for empty space amount, receive our URB size, 57 * and proceed to issue several 1-character writes, assuming they will fit. 58 * The very first write takes a complete URB. Fortunately, this only happens 59 * when processing onlcr, so we only need 2 buffers. These values must be 60 * powers of 2. 61 */ 62 #define ACM_NW 16 63 #define ACM_NR 16 64 65 struct acm_wb { 66 unsigned char *buf; 67 dma_addr_t dmah; 68 int len; 69 int use; 70 struct urb *urb; 71 struct acm *instance; 72 }; 73 74 struct acm_rb { 75 int size; 76 unsigned char *base; 77 dma_addr_t dma; 78 int index; 79 struct acm *instance; 80 }; 81 82 struct acm { 83 struct usb_device *dev; /* the corresponding usb device */ 84 struct usb_interface *control; /* control interface */ 85 struct usb_interface *data; /* data interface */ 86 struct tty_port port; /* our tty port data */ 87 struct urb *ctrlurb; /* urbs */ 88 u8 *ctrl_buffer; /* buffers of urbs */ 89 dma_addr_t ctrl_dma; /* dma handles of buffers */ 90 u8 *country_codes; /* country codes from device */ 91 unsigned int country_code_size; /* size of this buffer */ 92 unsigned int country_rel_date; /* release date of version */ 93 struct acm_wb wb[ACM_NW]; 94 unsigned long read_urbs_free; 95 struct urb *read_urbs[ACM_NR]; 96 struct acm_rb read_buffers[ACM_NR]; 97 int rx_buflimit; 98 int rx_endpoint; 99 spinlock_t read_lock; 100 int write_used; /* number of non-empty write buffers */ 101 int transmitting; 102 spinlock_t write_lock; 103 struct mutex mutex; 104 bool disconnected; 105 struct usb_cdc_line_coding line; /* bits, stop, parity */ 106 struct work_struct work; /* work queue entry for line discipline waking up */ 107 unsigned int ctrlin; /* input control lines (DCD, DSR, RI, break, overruns) */ 108 unsigned int ctrlout; /* output control lines (DTR, RTS) */ 109 unsigned int writesize; /* max packet size for the output bulk endpoint */ 110 unsigned int readsize,ctrlsize; /* buffer sizes for freeing */ 111 unsigned int minor; /* acm minor number */ 112 unsigned char clocal; /* termios CLOCAL */ 113 unsigned int ctrl_caps; /* control capabilities from the class specific header */ 114 unsigned int susp_count; /* number of suspended interfaces */ 115 unsigned int combined_interfaces:1; /* control and data collapsed */ 116 unsigned int is_int_ep:1; /* interrupt endpoints contrary to spec used */ 117 unsigned int throttled:1; /* actually throttled */ 118 unsigned int throttle_req:1; /* throttle requested */ 119 u8 bInterval; 120 struct acm_wb *delayed_wb; /* write queued for a device about to be woken */ 121 }; 122 123 #define CDC_DATA_INTERFACE_TYPE 0x0a 124 125 /* constants describing various quirks and errors */ 126 #define NO_UNION_NORMAL 1 127 #define SINGLE_RX_URB 2 128 #define NO_CAP_LINE 4 129 #define NOT_A_MODEM 8 130 #define NO_DATA_INTERFACE 16 131 #define IGNORE_DEVICE 32 132