xref: /linux/drivers/uio/uio_pdrv_genirq.c (revision d2912cb15bdda8ba4a5dd73396ad62641af2f520)
1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3  * drivers/uio/uio_pdrv_genirq.c
4  *
5  * Userspace I/O platform driver with generic IRQ handling code.
6  *
7  * Copyright (C) 2008 Magnus Damm
8  *
9  * Based on uio_pdrv.c by Uwe Kleine-Koenig,
10  * Copyright (C) 2008 by Digi International Inc.
11  * All rights reserved.
12  */
13 
14 #include <linux/platform_device.h>
15 #include <linux/uio_driver.h>
16 #include <linux/spinlock.h>
17 #include <linux/bitops.h>
18 #include <linux/module.h>
19 #include <linux/interrupt.h>
20 #include <linux/stringify.h>
21 #include <linux/pm_runtime.h>
22 #include <linux/slab.h>
23 
24 #include <linux/of.h>
25 #include <linux/of_platform.h>
26 #include <linux/of_address.h>
27 
28 #define DRIVER_NAME "uio_pdrv_genirq"
29 
30 struct uio_pdrv_genirq_platdata {
31 	struct uio_info *uioinfo;
32 	spinlock_t lock;
33 	unsigned long flags;
34 	struct platform_device *pdev;
35 };
36 
37 /* Bits in uio_pdrv_genirq_platdata.flags */
38 enum {
39 	UIO_IRQ_DISABLED = 0,
40 };
41 
42 static int uio_pdrv_genirq_open(struct uio_info *info, struct inode *inode)
43 {
44 	struct uio_pdrv_genirq_platdata *priv = info->priv;
45 
46 	/* Wait until the Runtime PM code has woken up the device */
47 	pm_runtime_get_sync(&priv->pdev->dev);
48 	return 0;
49 }
50 
51 static int uio_pdrv_genirq_release(struct uio_info *info, struct inode *inode)
52 {
53 	struct uio_pdrv_genirq_platdata *priv = info->priv;
54 
55 	/* Tell the Runtime PM code that the device has become idle */
56 	pm_runtime_put_sync(&priv->pdev->dev);
57 	return 0;
58 }
59 
60 static irqreturn_t uio_pdrv_genirq_handler(int irq, struct uio_info *dev_info)
61 {
62 	struct uio_pdrv_genirq_platdata *priv = dev_info->priv;
63 
64 	/* Just disable the interrupt in the interrupt controller, and
65 	 * remember the state so we can allow user space to enable it later.
66 	 */
67 
68 	spin_lock(&priv->lock);
69 	if (!__test_and_set_bit(UIO_IRQ_DISABLED, &priv->flags))
70 		disable_irq_nosync(irq);
71 	spin_unlock(&priv->lock);
72 
73 	return IRQ_HANDLED;
74 }
75 
76 static int uio_pdrv_genirq_irqcontrol(struct uio_info *dev_info, s32 irq_on)
77 {
78 	struct uio_pdrv_genirq_platdata *priv = dev_info->priv;
79 	unsigned long flags;
80 
81 	/* Allow user space to enable and disable the interrupt
82 	 * in the interrupt controller, but keep track of the
83 	 * state to prevent per-irq depth damage.
84 	 *
85 	 * Serialize this operation to support multiple tasks and concurrency
86 	 * with irq handler on SMP systems.
87 	 */
88 
89 	spin_lock_irqsave(&priv->lock, flags);
90 	if (irq_on) {
91 		if (__test_and_clear_bit(UIO_IRQ_DISABLED, &priv->flags))
92 			enable_irq(dev_info->irq);
93 	} else {
94 		if (!__test_and_set_bit(UIO_IRQ_DISABLED, &priv->flags))
95 			disable_irq_nosync(dev_info->irq);
96 	}
97 	spin_unlock_irqrestore(&priv->lock, flags);
98 
99 	return 0;
100 }
101 
102 static int uio_pdrv_genirq_probe(struct platform_device *pdev)
103 {
104 	struct uio_info *uioinfo = dev_get_platdata(&pdev->dev);
105 	struct uio_pdrv_genirq_platdata *priv;
106 	struct uio_mem *uiomem;
107 	int ret = -EINVAL;
108 	int i;
109 
110 	if (pdev->dev.of_node) {
111 		/* alloc uioinfo for one device */
112 		uioinfo = devm_kzalloc(&pdev->dev, sizeof(*uioinfo),
113 				       GFP_KERNEL);
114 		if (!uioinfo) {
115 			dev_err(&pdev->dev, "unable to kmalloc\n");
116 			return -ENOMEM;
117 		}
118 		uioinfo->name = devm_kasprintf(&pdev->dev, GFP_KERNEL, "%pOFn",
119 					       pdev->dev.of_node);
120 		uioinfo->version = "devicetree";
121 		/* Multiple IRQs are not supported */
122 	}
123 
124 	if (!uioinfo || !uioinfo->name || !uioinfo->version) {
125 		dev_err(&pdev->dev, "missing platform_data\n");
126 		return ret;
127 	}
128 
129 	if (uioinfo->handler || uioinfo->irqcontrol ||
130 	    uioinfo->irq_flags & IRQF_SHARED) {
131 		dev_err(&pdev->dev, "interrupt configuration error\n");
132 		return ret;
133 	}
134 
135 	priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
136 	if (!priv) {
137 		dev_err(&pdev->dev, "unable to kmalloc\n");
138 		return -ENOMEM;
139 	}
140 
141 	priv->uioinfo = uioinfo;
142 	spin_lock_init(&priv->lock);
143 	priv->flags = 0; /* interrupt is enabled to begin with */
144 	priv->pdev = pdev;
145 
146 	if (!uioinfo->irq) {
147 		ret = platform_get_irq(pdev, 0);
148 		uioinfo->irq = ret;
149 		if (ret == -ENXIO && pdev->dev.of_node)
150 			uioinfo->irq = UIO_IRQ_NONE;
151 		else if (ret < 0) {
152 			dev_err(&pdev->dev, "failed to get IRQ\n");
153 			return ret;
154 		}
155 	}
156 
157 	uiomem = &uioinfo->mem[0];
158 
159 	for (i = 0; i < pdev->num_resources; ++i) {
160 		struct resource *r = &pdev->resource[i];
161 
162 		if (r->flags != IORESOURCE_MEM)
163 			continue;
164 
165 		if (uiomem >= &uioinfo->mem[MAX_UIO_MAPS]) {
166 			dev_warn(&pdev->dev, "device has more than "
167 					__stringify(MAX_UIO_MAPS)
168 					" I/O memory resources.\n");
169 			break;
170 		}
171 
172 		uiomem->memtype = UIO_MEM_PHYS;
173 		uiomem->addr = r->start;
174 		uiomem->size = resource_size(r);
175 		uiomem->name = r->name;
176 		++uiomem;
177 	}
178 
179 	while (uiomem < &uioinfo->mem[MAX_UIO_MAPS]) {
180 		uiomem->size = 0;
181 		++uiomem;
182 	}
183 
184 	/* This driver requires no hardware specific kernel code to handle
185 	 * interrupts. Instead, the interrupt handler simply disables the
186 	 * interrupt in the interrupt controller. User space is responsible
187 	 * for performing hardware specific acknowledge and re-enabling of
188 	 * the interrupt in the interrupt controller.
189 	 *
190 	 * Interrupt sharing is not supported.
191 	 */
192 
193 	uioinfo->handler = uio_pdrv_genirq_handler;
194 	uioinfo->irqcontrol = uio_pdrv_genirq_irqcontrol;
195 	uioinfo->open = uio_pdrv_genirq_open;
196 	uioinfo->release = uio_pdrv_genirq_release;
197 	uioinfo->priv = priv;
198 
199 	/* Enable Runtime PM for this device:
200 	 * The device starts in suspended state to allow the hardware to be
201 	 * turned off by default. The Runtime PM bus code should power on the
202 	 * hardware and enable clocks at open().
203 	 */
204 	pm_runtime_enable(&pdev->dev);
205 
206 	ret = uio_register_device(&pdev->dev, priv->uioinfo);
207 	if (ret) {
208 		dev_err(&pdev->dev, "unable to register uio device\n");
209 		pm_runtime_disable(&pdev->dev);
210 		return ret;
211 	}
212 
213 	platform_set_drvdata(pdev, priv);
214 	return 0;
215 }
216 
217 static int uio_pdrv_genirq_remove(struct platform_device *pdev)
218 {
219 	struct uio_pdrv_genirq_platdata *priv = platform_get_drvdata(pdev);
220 
221 	uio_unregister_device(priv->uioinfo);
222 	pm_runtime_disable(&pdev->dev);
223 
224 	priv->uioinfo->handler = NULL;
225 	priv->uioinfo->irqcontrol = NULL;
226 
227 	return 0;
228 }
229 
230 static int uio_pdrv_genirq_runtime_nop(struct device *dev)
231 {
232 	/* Runtime PM callback shared between ->runtime_suspend()
233 	 * and ->runtime_resume(). Simply returns success.
234 	 *
235 	 * In this driver pm_runtime_get_sync() and pm_runtime_put_sync()
236 	 * are used at open() and release() time. This allows the
237 	 * Runtime PM code to turn off power to the device while the
238 	 * device is unused, ie before open() and after release().
239 	 *
240 	 * This Runtime PM callback does not need to save or restore
241 	 * any registers since user space is responsbile for hardware
242 	 * register reinitialization after open().
243 	 */
244 	return 0;
245 }
246 
247 static const struct dev_pm_ops uio_pdrv_genirq_dev_pm_ops = {
248 	.runtime_suspend = uio_pdrv_genirq_runtime_nop,
249 	.runtime_resume = uio_pdrv_genirq_runtime_nop,
250 };
251 
252 #ifdef CONFIG_OF
253 static struct of_device_id uio_of_genirq_match[] = {
254 	{ /* This is filled with module_parm */ },
255 	{ /* Sentinel */ },
256 };
257 MODULE_DEVICE_TABLE(of, uio_of_genirq_match);
258 module_param_string(of_id, uio_of_genirq_match[0].compatible, 128, 0);
259 MODULE_PARM_DESC(of_id, "Openfirmware id of the device to be handled by uio");
260 #endif
261 
262 static struct platform_driver uio_pdrv_genirq = {
263 	.probe = uio_pdrv_genirq_probe,
264 	.remove = uio_pdrv_genirq_remove,
265 	.driver = {
266 		.name = DRIVER_NAME,
267 		.pm = &uio_pdrv_genirq_dev_pm_ops,
268 		.of_match_table = of_match_ptr(uio_of_genirq_match),
269 	},
270 };
271 
272 module_platform_driver(uio_pdrv_genirq);
273 
274 MODULE_AUTHOR("Magnus Damm");
275 MODULE_DESCRIPTION("Userspace I/O platform driver with generic IRQ handling");
276 MODULE_LICENSE("GPL v2");
277 MODULE_ALIAS("platform:" DRIVER_NAME);
278