1menu "SCSI device support" 2 3config SCSI_MOD 4 tristate 5 default y if SCSI=n || SCSI=y 6 default m if SCSI=m 7 8config RAID_ATTRS 9 tristate "RAID Transport Class" 10 default n 11 depends on BLOCK 12 depends on SCSI_MOD 13 ---help--- 14 Provides RAID 15 16config SCSI 17 tristate "SCSI device support" 18 depends on BLOCK 19 select SCSI_DMA if HAS_DMA 20 select SG_POOL 21 select BLK_SCSI_REQUEST 22 ---help--- 23 If you want to use a SCSI hard disk, SCSI tape drive, SCSI CD-ROM or 24 any other SCSI device under Linux, say Y and make sure that you know 25 the name of your SCSI host adapter (the card inside your computer 26 that "speaks" the SCSI protocol, also called SCSI controller), 27 because you will be asked for it. 28 29 You also need to say Y here if you have a device which speaks 30 the SCSI protocol. Examples of this include the parallel port 31 version of the IOMEGA ZIP drive, USB storage devices, Fibre 32 Channel, and FireWire storage. 33 34 To compile this driver as a module, choose M here and read 35 <file:Documentation/scsi/scsi.txt>. 36 The module will be called scsi_mod. 37 38 However, do not compile this as a module if your root file system 39 (the one containing the directory /) is located on a SCSI device. 40 41config SCSI_DMA 42 bool 43 default n 44 45config SCSI_NETLINK 46 bool 47 default n 48 depends on NET 49 50config SCSI_MQ_DEFAULT 51 bool "SCSI: use blk-mq I/O path by default" 52 depends on SCSI 53 ---help--- 54 This option enables the new blk-mq based I/O path for SCSI 55 devices by default. With the option the scsi_mod.use_blk_mq 56 module/boot option defaults to Y, without it to N, but it can 57 still be overridden either way. 58 59 If unsure say N. 60 61config SCSI_PROC_FS 62 bool "legacy /proc/scsi/ support" 63 depends on SCSI && PROC_FS 64 default y 65 ---help--- 66 This option enables support for the various files in 67 /proc/scsi. In Linux 2.6 this has been superseded by 68 files in sysfs but many legacy applications rely on this. 69 70 If unsure say Y. 71 72comment "SCSI support type (disk, tape, CD-ROM)" 73 depends on SCSI 74 75config BLK_DEV_SD 76 tristate "SCSI disk support" 77 depends on SCSI 78 ---help--- 79 If you want to use SCSI hard disks, Fibre Channel disks, 80 Serial ATA (SATA) or Parallel ATA (PATA) hard disks, 81 USB storage or the SCSI or parallel port version of 82 the IOMEGA ZIP drive, say Y and read the SCSI-HOWTO, 83 the Disk-HOWTO and the Multi-Disk-HOWTO, available from 84 <http://www.tldp.org/docs.html#howto>. This is NOT for SCSI 85 CD-ROMs. 86 87 To compile this driver as a module, choose M here and read 88 <file:Documentation/scsi/scsi.txt>. 89 The module will be called sd_mod. 90 91 Do not compile this driver as a module if your root file system 92 (the one containing the directory /) is located on a SCSI disk. 93 In this case, do not compile the driver for your SCSI host adapter 94 (below) as a module either. 95 96config CHR_DEV_ST 97 tristate "SCSI tape support" 98 depends on SCSI 99 ---help--- 100 If you want to use a SCSI tape drive under Linux, say Y and read the 101 SCSI-HOWTO, available from 102 <http://www.tldp.org/docs.html#howto>, and 103 <file:Documentation/scsi/st.txt> in the kernel source. This is NOT 104 for SCSI CD-ROMs. 105 106 To compile this driver as a module, choose M here and read 107 <file:Documentation/scsi/scsi.txt>. The module will be called st. 108 109config CHR_DEV_OSST 110 tristate "SCSI OnStream SC-x0 tape support" 111 depends on SCSI 112 ---help--- 113 The OnStream SC-x0 SCSI tape drives cannot be driven by the 114 standard st driver, but instead need this special osst driver and 115 use the /dev/osstX char device nodes (major 206). Via usb-storage, 116 you may be able to drive the USB-x0 and DI-x0 drives as well. 117 Note that there is also a second generation of OnStream 118 tape drives (ADR-x0) that supports the standard SCSI-2 commands for 119 tapes (QIC-157) and can be driven by the standard driver st. 120 For more information, you may have a look at the SCSI-HOWTO 121 <http://www.tldp.org/docs.html#howto> and 122 <file:Documentation/scsi/osst.txt> in the kernel source. 123 More info on the OnStream driver may be found on 124 <http://sourceforge.net/projects/osst/> 125 Please also have a look at the standard st docu, as most of it 126 applies to osst as well. 127 128 To compile this driver as a module, choose M here and read 129 <file:Documentation/scsi/scsi.txt>. The module will be called osst. 130 131config BLK_DEV_SR 132 tristate "SCSI CDROM support" 133 depends on SCSI && BLK_DEV 134 select CDROM 135 ---help--- 136 If you want to use a CD or DVD drive attached to your computer 137 by SCSI, FireWire, USB or ATAPI, say Y and read the SCSI-HOWTO 138 and the CDROM-HOWTO at <http://www.tldp.org/docs.html#howto>. 139 140 Make sure to say Y or M to "ISO 9660 CD-ROM file system support". 141 142 To compile this driver as a module, choose M here and read 143 <file:Documentation/scsi/scsi.txt>. 144 The module will be called sr_mod. 145 146config BLK_DEV_SR_VENDOR 147 bool "Enable vendor-specific extensions (for SCSI CDROM)" 148 depends on BLK_DEV_SR 149 help 150 This enables the usage of vendor specific SCSI commands. This is 151 required to support multisession CDs with old NEC/TOSHIBA cdrom 152 drives (and HP Writers). If you have such a drive and get the first 153 session only, try saying Y here; everybody else says N. 154 155config CHR_DEV_SG 156 tristate "SCSI generic support" 157 depends on SCSI 158 ---help--- 159 If you want to use SCSI scanners, synthesizers or CD-writers or just 160 about anything having "SCSI" in its name other than hard disks, 161 CD-ROMs or tapes, say Y here. These won't be supported by the kernel 162 directly, so you need some additional software which knows how to 163 talk to these devices using the SCSI protocol: 164 165 For scanners, look at SANE (<http://www.sane-project.org/>). For CD 166 writer software look at Cdrtools 167 (<http://cdrecord.berlios.de/private/cdrecord.html>) 168 and for burning a "disk at once": CDRDAO 169 (<http://cdrdao.sourceforge.net/>). Cdparanoia is a high 170 quality digital reader of audio CDs (<http://www.xiph.org/paranoia/>). 171 For other devices, it's possible that you'll have to write the 172 driver software yourself. Please read the file 173 <file:Documentation/scsi/scsi-generic.txt> for more information. 174 175 To compile this driver as a module, choose M here and read 176 <file:Documentation/scsi/scsi.txt>. The module will be called sg. 177 178 If unsure, say N. 179 180config CHR_DEV_SCH 181 tristate "SCSI media changer support" 182 depends on SCSI 183 ---help--- 184 This is a driver for SCSI media changers. Most common devices are 185 tape libraries and MOD/CDROM jukeboxes. *Real* jukeboxes, you 186 don't need this for those tiny 6-slot cdrom changers. Media 187 changers are listed as "Type: Medium Changer" in /proc/scsi/scsi. 188 If you have such hardware and want to use it with linux, say Y 189 here. Check <file:Documentation/scsi/scsi-changer.txt> for details. 190 191 If you want to compile this as a module ( = code which can be 192 inserted in and removed from the running kernel whenever you want), 193 say M here and read <file:Documentation/kbuild/modules.txt> and 194 <file:Documentation/scsi/scsi.txt>. The module will be called ch.o. 195 If unsure, say N. 196 197config SCSI_ENCLOSURE 198 tristate "SCSI Enclosure Support" 199 depends on SCSI && ENCLOSURE_SERVICES 200 depends on m || SCSI_SAS_ATTRS != m 201 help 202 Enclosures are devices sitting on or in SCSI backplanes that 203 manage devices. If you have a disk cage, the chances are that 204 it has an enclosure device. Selecting this option will just allow 205 certain enclosure conditions to be reported and is not required. 206 207config SCSI_CONSTANTS 208 bool "Verbose SCSI error reporting (kernel size += 36K)" 209 depends on SCSI 210 help 211 The error messages regarding your SCSI hardware will be easier to 212 understand if you say Y here; it will enlarge your kernel by about 213 36 KB. If in doubt, say Y. 214 215config SCSI_LOGGING 216 bool "SCSI logging facility" 217 depends on SCSI 218 ---help--- 219 This turns on a logging facility that can be used to debug a number 220 of SCSI related problems. 221 222 If you say Y here, no logging output will appear by default, but you 223 can enable logging by saying Y to "/proc file system support" and 224 "Sysctl support" below and executing the command 225 226 echo <bitmask> > /proc/sys/dev/scsi/logging_level 227 228 where <bitmask> is a four byte value representing the logging type 229 and logging level for each type of logging selected. 230 231 There are a number of logging types and you can find them in the 232 source at <file:drivers/scsi/scsi_logging.h>. The logging levels 233 are also described in that file and they determine the verbosity of 234 the logging for each logging type. 235 236 If you say N here, it may be harder to track down some types of SCSI 237 problems. If you say Y here your kernel will be somewhat larger, but 238 there should be no noticeable performance impact as long as you have 239 logging turned off. 240 241config SCSI_SCAN_ASYNC 242 bool "Asynchronous SCSI scanning" 243 depends on SCSI 244 help 245 The SCSI subsystem can probe for devices while the rest of the 246 system continues booting, and even probe devices on different 247 busses in parallel, leading to a significant speed-up. 248 249 You can override this choice by specifying "scsi_mod.scan=sync" 250 or async on the kernel's command line. 251 252 Note that this setting also affects whether resuming from 253 system suspend will be performed asynchronously. 254 255menu "SCSI Transports" 256 depends on SCSI 257 258config SCSI_SPI_ATTRS 259 tristate "Parallel SCSI (SPI) Transport Attributes" 260 depends on SCSI 261 help 262 If you wish to export transport-specific information about 263 each attached SCSI device to sysfs, say Y. Otherwise, say N. 264 265config SCSI_FC_ATTRS 266 tristate "FiberChannel Transport Attributes" 267 depends on SCSI && NET 268 select BLK_DEV_BSGLIB 269 select SCSI_NETLINK 270 help 271 If you wish to export transport-specific information about 272 each attached FiberChannel device to sysfs, say Y. 273 Otherwise, say N. 274 275config SCSI_ISCSI_ATTRS 276 tristate "iSCSI Transport Attributes" 277 depends on SCSI && NET 278 select BLK_DEV_BSGLIB 279 help 280 If you wish to export transport-specific information about 281 each attached iSCSI device to sysfs, say Y. 282 Otherwise, say N. 283 284config SCSI_SAS_ATTRS 285 tristate "SAS Transport Attributes" 286 depends on SCSI 287 select BLK_DEV_BSGLIB 288 help 289 If you wish to export transport-specific information about 290 each attached SAS device to sysfs, say Y. 291 292source "drivers/scsi/libsas/Kconfig" 293 294config SCSI_SRP_ATTRS 295 tristate "SRP Transport Attributes" 296 depends on SCSI 297 help 298 If you wish to export transport-specific information about 299 each attached SRP device to sysfs, say Y. 300 301endmenu 302 303menuconfig SCSI_LOWLEVEL 304 bool "SCSI low-level drivers" 305 depends on SCSI!=n 306 default y 307 308if SCSI_LOWLEVEL && SCSI 309 310config ISCSI_TCP 311 tristate "iSCSI Initiator over TCP/IP" 312 depends on SCSI && INET 313 select CRYPTO 314 select CRYPTO_MD5 315 select CRYPTO_CRC32C 316 select SCSI_ISCSI_ATTRS 317 help 318 The iSCSI Driver provides a host with the ability to access storage 319 through an IP network. The driver uses the iSCSI protocol to transport 320 SCSI requests and responses over a TCP/IP network between the host 321 (the "initiator") and "targets". Architecturally, the iSCSI driver 322 combines with the host's TCP/IP stack, network drivers, and Network 323 Interface Card (NIC) to provide the same functions as a SCSI or a 324 Fibre Channel (FC) adapter driver with a Host Bus Adapter (HBA). 325 326 To compile this driver as a module, choose M here: the 327 module will be called iscsi_tcp. 328 329 The userspace component needed to initialize the driver, documentation, 330 and sample configuration files can be found here: 331 332 http://open-iscsi.org 333 334config ISCSI_BOOT_SYSFS 335 tristate "iSCSI Boot Sysfs Interface" 336 default n 337 help 338 This option enables support for exposing iSCSI boot information 339 via sysfs to userspace. If you wish to export this information, 340 say Y. Otherwise, say N. 341 342source "drivers/scsi/cxgbi/Kconfig" 343source "drivers/scsi/bnx2i/Kconfig" 344source "drivers/scsi/bnx2fc/Kconfig" 345source "drivers/scsi/be2iscsi/Kconfig" 346source "drivers/scsi/cxlflash/Kconfig" 347 348config SGIWD93_SCSI 349 tristate "SGI WD93C93 SCSI Driver" 350 depends on SGI_HAS_WD93 && SCSI 351 help 352 If you have a Western Digital WD93 SCSI controller on 353 an SGI MIPS system, say Y. Otherwise, say N. 354 355config BLK_DEV_3W_XXXX_RAID 356 tristate "3ware 5/6/7/8xxx ATA-RAID support" 357 depends on PCI && SCSI 358 help 359 3ware is the only hardware ATA-Raid product in Linux to date. 360 This card is 2,4, or 8 channel master mode support only. 361 SCSI support required!!! 362 363 <http://www.3ware.com/> 364 365 Please read the comments at the top of 366 <file:drivers/scsi/3w-xxxx.c>. 367 368config SCSI_HPSA 369 tristate "HP Smart Array SCSI driver" 370 depends on PCI && SCSI 371 select CHECK_SIGNATURE 372 select SCSI_SAS_ATTRS 373 help 374 This driver supports HP Smart Array Controllers (circa 2009). 375 It is a SCSI alternative to the cciss driver, which is a block 376 driver. Anyone wishing to use HP Smart Array controllers who 377 would prefer the devices be presented to linux as SCSI devices, 378 rather than as generic block devices should say Y here. 379 380config SCSI_3W_9XXX 381 tristate "3ware 9xxx SATA-RAID support" 382 depends on PCI && SCSI 383 help 384 This driver supports the 9000 series 3ware SATA-RAID cards. 385 386 <http://www.amcc.com> 387 388 Please read the comments at the top of 389 <file:drivers/scsi/3w-9xxx.c>. 390 391config SCSI_3W_SAS 392 tristate "3ware 97xx SAS/SATA-RAID support" 393 depends on PCI && SCSI 394 help 395 This driver supports the LSI 3ware 9750 6Gb/s SAS/SATA-RAID cards. 396 397 <http://www.lsi.com> 398 399 Please read the comments at the top of 400 <file:drivers/scsi/3w-sas.c>. 401 402config SCSI_ACARD 403 tristate "ACARD SCSI support" 404 depends on PCI && SCSI 405 help 406 This driver supports the ACARD SCSI host adapter. 407 Support Chip <ATP870 ATP876 ATP880 ATP885> 408 To compile this driver as a module, choose M here: the 409 module will be called atp870u. 410 411config SCSI_AHA152X 412 tristate "Adaptec AHA152X/2825 support" 413 depends on ISA && SCSI 414 select SCSI_SPI_ATTRS 415 select CHECK_SIGNATURE 416 ---help--- 417 This is a driver for the AHA-1510, AHA-1520, AHA-1522, and AHA-2825 418 SCSI host adapters. It also works for the AVA-1505, but the IRQ etc. 419 must be manually specified in this case. 420 421 It is explained in section 3.3 of the SCSI-HOWTO, available from 422 <http://www.tldp.org/docs.html#howto>. You might also want to 423 read the file <file:Documentation/scsi/aha152x.txt>. 424 425 To compile this driver as a module, choose M here: the 426 module will be called aha152x. 427 428config SCSI_AHA1542 429 tristate "Adaptec AHA1542 support" 430 depends on ISA && SCSI && ISA_DMA_API 431 ---help--- 432 This is support for a SCSI host adapter. It is explained in section 433 3.4 of the SCSI-HOWTO, available from 434 <http://www.tldp.org/docs.html#howto>. Note that Trantor was 435 purchased by Adaptec, and some former Trantor products are being 436 sold under the Adaptec name. If it doesn't work out of the box, you 437 may have to change some settings in <file:drivers/scsi/aha1542.h>. 438 439 To compile this driver as a module, choose M here: the 440 module will be called aha1542. 441 442config SCSI_AHA1740 443 tristate "Adaptec AHA1740 support" 444 depends on EISA && SCSI 445 ---help--- 446 This is support for a SCSI host adapter. It is explained in section 447 3.5 of the SCSI-HOWTO, available from 448 <http://www.tldp.org/docs.html#howto>. If it doesn't work out 449 of the box, you may have to change some settings in 450 <file:drivers/scsi/aha1740.h>. 451 452 To compile this driver as a module, choose M here: the 453 module will be called aha1740. 454 455config SCSI_AACRAID 456 tristate "Adaptec AACRAID support" 457 depends on SCSI && PCI 458 help 459 This driver supports a variety of Dell, HP, Adaptec, IBM and 460 ICP storage products. For a list of supported products, refer 461 to <file:Documentation/scsi/aacraid.txt>. 462 463 To compile this driver as a module, choose M here: the module 464 will be called aacraid. 465 466 467source "drivers/scsi/aic7xxx/Kconfig.aic7xxx" 468source "drivers/scsi/aic7xxx/Kconfig.aic79xx" 469source "drivers/scsi/aic94xx/Kconfig" 470source "drivers/scsi/hisi_sas/Kconfig" 471source "drivers/scsi/mvsas/Kconfig" 472 473config SCSI_MVUMI 474 tristate "Marvell UMI driver" 475 depends on SCSI && PCI 476 help 477 Module for Marvell Universal Message Interface(UMI) driver 478 479 To compile this driver as a module, choose M here: the 480 module will be called mvumi. 481 482config SCSI_DPT_I2O 483 tristate "Adaptec I2O RAID support " 484 depends on SCSI && PCI && VIRT_TO_BUS 485 help 486 This driver supports all of Adaptec's I2O based RAID controllers as 487 well as the DPT SmartRaid V cards. This is an Adaptec maintained 488 driver by Deanna Bonds. See <file:Documentation/scsi/dpti.txt>. 489 490 To compile this driver as a module, choose M here: the 491 module will be called dpt_i2o. 492 493config SCSI_ADVANSYS 494 tristate "AdvanSys SCSI support" 495 depends on SCSI 496 depends on ISA || EISA || PCI 497 depends on ISA_DMA_API || !ISA 498 help 499 This is a driver for all SCSI host adapters manufactured by 500 AdvanSys. It is documented in the kernel source in 501 <file:drivers/scsi/advansys.c>. 502 503 To compile this driver as a module, choose M here: the 504 module will be called advansys. 505 506config SCSI_ARCMSR 507 tristate "ARECA (ARC11xx/12xx/13xx/16xx) SATA/SAS RAID Host Adapter" 508 depends on PCI && SCSI 509 help 510 This driver supports all of ARECA's SATA/SAS RAID controller cards. 511 This is an ARECA-maintained driver by Erich Chen. 512 If you have any problems, please mail to: <erich@areca.com.tw>. 513 Areca supports Linux RAID config tools. 514 Please link <http://www.areca.com.tw> 515 516 To compile this driver as a module, choose M here: the 517 module will be called arcmsr (modprobe arcmsr). 518 519source "drivers/scsi/esas2r/Kconfig" 520source "drivers/scsi/megaraid/Kconfig.megaraid" 521source "drivers/scsi/mpt3sas/Kconfig" 522source "drivers/scsi/smartpqi/Kconfig" 523source "drivers/scsi/ufs/Kconfig" 524 525config SCSI_HPTIOP 526 tristate "HighPoint RocketRAID 3xxx/4xxx Controller support" 527 depends on SCSI && PCI 528 help 529 This option enables support for HighPoint RocketRAID 3xxx/4xxx 530 controllers. 531 532 To compile this driver as a module, choose M here; the module 533 will be called hptiop. If unsure, say N. 534 535config SCSI_BUSLOGIC 536 tristate "BusLogic SCSI support" 537 depends on (PCI || ISA || MCA) && SCSI && ISA_DMA_API && VIRT_TO_BUS 538 ---help--- 539 This is support for BusLogic MultiMaster and FlashPoint SCSI Host 540 Adapters. Consult the SCSI-HOWTO, available from 541 <http://www.tldp.org/docs.html#howto>, and the files 542 <file:Documentation/scsi/BusLogic.txt> and 543 <file:Documentation/scsi/FlashPoint.txt> for more information. 544 Note that support for FlashPoint is only available for 32-bit 545 x86 configurations. 546 547 To compile this driver as a module, choose M here: the 548 module will be called BusLogic. 549 550config SCSI_FLASHPOINT 551 bool "FlashPoint support" 552 depends on SCSI_BUSLOGIC && PCI 553 help 554 This option allows you to add FlashPoint support to the 555 BusLogic SCSI driver. The FlashPoint SCCB Manager code is 556 substantial, so users of MultiMaster Host Adapters may not 557 wish to include it. 558 559config VMWARE_PVSCSI 560 tristate "VMware PVSCSI driver support" 561 depends on PCI && SCSI && X86 562 help 563 This driver supports VMware's para virtualized SCSI HBA. 564 To compile this driver as a module, choose M here: the 565 module will be called vmw_pvscsi. 566 567config XEN_SCSI_FRONTEND 568 tristate "XEN SCSI frontend driver" 569 depends on SCSI && XEN 570 select XEN_XENBUS_FRONTEND 571 help 572 The XEN SCSI frontend driver allows the kernel to access SCSI Devices 573 within another guest OS (usually Dom0). 574 Only needed if the kernel is running in a XEN guest and generic 575 SCSI access to a device is needed. 576 577config HYPERV_STORAGE 578 tristate "Microsoft Hyper-V virtual storage driver" 579 depends on SCSI && HYPERV 580 depends on m || SCSI_FC_ATTRS != m 581 default HYPERV 582 help 583 Select this option to enable the Hyper-V virtual storage driver. 584 585config LIBFC 586 tristate "LibFC module" 587 depends on SCSI_FC_ATTRS 588 select CRC32 589 ---help--- 590 Fibre Channel library module 591 592config LIBFCOE 593 tristate "LibFCoE module" 594 depends on LIBFC 595 ---help--- 596 Library for Fibre Channel over Ethernet module 597 598config FCOE 599 tristate "FCoE module" 600 depends on PCI 601 depends on LIBFCOE 602 ---help--- 603 Fibre Channel over Ethernet module 604 605config FCOE_FNIC 606 tristate "Cisco FNIC Driver" 607 depends on PCI && X86 608 depends on LIBFCOE 609 help 610 This is support for the Cisco PCI-Express FCoE HBA. 611 612 To compile this driver as a module, choose M here and read 613 <file:Documentation/scsi/scsi.txt>. 614 The module will be called fnic. 615 616config SCSI_SNIC 617 tristate "Cisco SNIC Driver" 618 depends on PCI && SCSI 619 help 620 This is support for the Cisco PCI-Express SCSI HBA. 621 622 To compile this driver as a module, choose M here and read 623 <file:Documentation/scsi/scsi.txt>. 624 The module will be called snic. 625 626config SCSI_SNIC_DEBUG_FS 627 bool "Cisco SNIC Driver Debugfs Support" 628 depends on SCSI_SNIC && DEBUG_FS 629 help 630 This enables to list debugging information from SNIC Driver 631 available via debugfs file system 632 633config SCSI_DMX3191D 634 tristate "DMX3191D SCSI support" 635 depends on PCI && SCSI 636 select SCSI_SPI_ATTRS 637 help 638 This is support for Domex DMX3191D SCSI Host Adapters. 639 640 To compile this driver as a module, choose M here: the 641 module will be called dmx3191d. 642 643config SCSI_GDTH 644 tristate "Intel/ICP (former GDT SCSI Disk Array) RAID Controller support" 645 depends on (ISA || EISA || PCI) && SCSI && ISA_DMA_API 646 ---help--- 647 Formerly called GDT SCSI Disk Array Controller Support. 648 649 This is a driver for RAID/SCSI Disk Array Controllers (EISA/ISA/PCI) 650 manufactured by Intel Corporation/ICP vortex GmbH. It is documented 651 in the kernel source in <file:drivers/scsi/gdth.c> and 652 <file:drivers/scsi/gdth.h>. 653 654 To compile this driver as a module, choose M here: the 655 module will be called gdth. 656 657config SCSI_ISCI 658 tristate "Intel(R) C600 Series Chipset SAS Controller" 659 depends on PCI && SCSI 660 depends on X86 661 select SCSI_SAS_LIBSAS 662 ---help--- 663 This driver supports the 6Gb/s SAS capabilities of the storage 664 control unit found in the Intel(R) C600 series chipset. 665 666config SCSI_GENERIC_NCR5380 667 tristate "Generic NCR5380/53c400 SCSI ISA card support" 668 depends on ISA && SCSI && HAS_IOPORT_MAP 669 select SCSI_SPI_ATTRS 670 ---help--- 671 This is a driver for old ISA card SCSI controllers based on a 672 NCR 5380, 53C80, 53C400, 53C400A, or DTC 436 device. 673 Most boards such as the Trantor T130 fit this category, as do 674 various 8-bit and 16-bit ISA cards bundled with SCSI scanners. 675 676 To compile this driver as a module, choose M here: the 677 module will be called g_NCR5380. 678 679config SCSI_IPS 680 tristate "IBM ServeRAID support" 681 depends on PCI && SCSI 682 ---help--- 683 This is support for the IBM ServeRAID hardware RAID controllers. 684 See <http://www.developer.ibm.com/welcome/netfinity/serveraid.html> 685 and <http://www-947.ibm.com/support/entry/portal/docdisplay?brand=5000008&lndocid=SERV-RAID> 686 for more information. If this driver does not work correctly 687 without modification please contact the author by email at 688 <ipslinux@adaptec.com>. 689 690 To compile this driver as a module, choose M here: the 691 module will be called ips. 692 693config SCSI_IBMVSCSI 694 tristate "IBM Virtual SCSI support" 695 depends on PPC_PSERIES 696 select SCSI_SRP_ATTRS 697 help 698 This is the IBM POWER Virtual SCSI Client 699 700 To compile this driver as a module, choose M here: the 701 module will be called ibmvscsi. 702 703config SCSI_IBMVSCSIS 704 tristate "IBM Virtual SCSI Server support" 705 depends on PPC_PSERIES && TARGET_CORE && SCSI && PCI 706 help 707 This is the IBM POWER Virtual SCSI Target Server 708 This driver uses the SRP protocol for communication between servers 709 guest and/or the host that run on the same server. 710 More information on VSCSI protocol can be found at www.power.org 711 712 The userspace configuration needed to initialize the driver can be 713 be found here: 714 715 https://github.com/powervm/ibmvscsis/wiki/Configuration 716 717 To compile this driver as a module, choose M here: the 718 module will be called ibmvscsis. 719 720config SCSI_IBMVFC 721 tristate "IBM Virtual FC support" 722 depends on PPC_PSERIES && SCSI 723 depends on SCSI_FC_ATTRS 724 help 725 This is the IBM POWER Virtual FC Client 726 727 To compile this driver as a module, choose M here: the 728 module will be called ibmvfc. 729 730config SCSI_IBMVFC_TRACE 731 bool "enable driver internal trace" 732 depends on SCSI_IBMVFC 733 default y 734 help 735 If you say Y here, the driver will trace all commands issued 736 to the adapter. Performance impact is minimal. Trace can be 737 dumped using /sys/class/scsi_host/hostXX/trace. 738 739config SCSI_INITIO 740 tristate "Initio 9100U(W) support" 741 depends on PCI && SCSI 742 help 743 This is support for the Initio 91XXU(W) SCSI host adapter. Please 744 read the SCSI-HOWTO, available from 745 <http://www.tldp.org/docs.html#howto>. 746 747 To compile this driver as a module, choose M here: the 748 module will be called initio. 749 750config SCSI_INIA100 751 tristate "Initio INI-A100U2W support" 752 depends on PCI && SCSI 753 help 754 This is support for the Initio INI-A100U2W SCSI host adapter. 755 Please read the SCSI-HOWTO, available from 756 <http://www.tldp.org/docs.html#howto>. 757 758 To compile this driver as a module, choose M here: the 759 module will be called a100u2w. 760 761config SCSI_PPA 762 tristate "IOMEGA parallel port (ppa - older drives)" 763 depends on SCSI && PARPORT_PC 764 ---help--- 765 This driver supports older versions of IOMEGA's parallel port ZIP 766 drive (a 100 MB removable media device). 767 768 Note that you can say N here if you have the SCSI version of the ZIP 769 drive: it will be supported automatically if you said Y to the 770 generic "SCSI disk support", above. 771 772 If you have the ZIP Plus drive or a more recent parallel port ZIP 773 drive (if the supplied cable with the drive is labeled "AutoDetect") 774 then you should say N here and Y to "IOMEGA parallel port (imm - 775 newer drives)", below. 776 777 For more information about this driver and how to use it you should 778 read the file <file:Documentation/scsi/ppa.txt>. You should also read 779 the SCSI-HOWTO, which is available from 780 <http://www.tldp.org/docs.html#howto>. If you use this driver, 781 you will still be able to use the parallel port for other tasks, 782 such as a printer; it is safe to compile both drivers into the 783 kernel. 784 785 To compile this driver as a module, choose M here: the 786 module will be called ppa. 787 788config SCSI_IMM 789 tristate "IOMEGA parallel port (imm - newer drives)" 790 depends on SCSI && PARPORT_PC 791 ---help--- 792 This driver supports newer versions of IOMEGA's parallel port ZIP 793 drive (a 100 MB removable media device). 794 795 Note that you can say N here if you have the SCSI version of the ZIP 796 drive: it will be supported automatically if you said Y to the 797 generic "SCSI disk support", above. 798 799 If you have the ZIP Plus drive or a more recent parallel port ZIP 800 drive (if the supplied cable with the drive is labeled "AutoDetect") 801 then you should say Y here; if you have an older ZIP drive, say N 802 here and Y to "IOMEGA Parallel Port (ppa - older drives)", above. 803 804 For more information about this driver and how to use it you should 805 read the file <file:Documentation/scsi/ppa.txt>. You should also read 806 the SCSI-HOWTO, which is available from 807 <http://www.tldp.org/docs.html#howto>. If you use this driver, 808 you will still be able to use the parallel port for other tasks, 809 such as a printer; it is safe to compile both drivers into the 810 kernel. 811 812 To compile this driver as a module, choose M here: the 813 module will be called imm. 814 815config SCSI_IZIP_EPP16 816 bool "ppa/imm option - Use slow (but safe) EPP-16" 817 depends on SCSI_PPA || SCSI_IMM 818 ---help--- 819 EPP (Enhanced Parallel Port) is a standard for parallel ports which 820 allows them to act as expansion buses that can handle up to 64 821 peripheral devices. 822 823 Some parallel port chipsets are slower than their motherboard, and 824 so we have to control the state of the chipset's FIFO queue every 825 now and then to avoid data loss. This will be done if you say Y 826 here. 827 828 Generally, saying Y is the safe option and slows things down a bit. 829 830config SCSI_IZIP_SLOW_CTR 831 bool "ppa/imm option - Assume slow parport control register" 832 depends on SCSI_PPA || SCSI_IMM 833 help 834 Some parallel ports are known to have excessive delays between 835 changing the parallel port control register and good data being 836 available on the parallel port data/status register. This option 837 forces a small delay (1.0 usec to be exact) after changing the 838 control register to let things settle out. Enabling this option may 839 result in a big drop in performance but some very old parallel ports 840 (found in 386 vintage machines) will not work properly. 841 842 Generally, saying N is fine. 843 844config SCSI_NCR_D700 845 tristate "NCR Dual 700 MCA SCSI support" 846 depends on MCA && SCSI 847 select SCSI_SPI_ATTRS 848 help 849 This is a driver for the MicroChannel Dual 700 card produced by 850 NCR and commonly used in 345x/35xx/4100 class machines. It always 851 tries to negotiate sync and uses tag command queueing. 852 853 Unless you have an NCR manufactured machine, the chances are that 854 you do not have this SCSI card, so say N. 855 856config SCSI_LASI700 857 tristate "HP Lasi SCSI support for 53c700/710" 858 depends on GSC && SCSI 859 select SCSI_SPI_ATTRS 860 help 861 This is a driver for the SCSI controller in the Lasi chip found in 862 many PA-RISC workstations & servers. If you do not know whether you 863 have a Lasi chip, it is safe to say "Y" here. 864 865config SCSI_SNI_53C710 866 tristate "SNI RM SCSI support for 53c710" 867 depends on SNI_RM && SCSI 868 select SCSI_SPI_ATTRS 869 select 53C700_LE_ON_BE 870 help 871 This is a driver for the onboard SCSI controller found in older 872 SNI RM workstations & servers. 873 874config 53C700_LE_ON_BE 875 bool 876 depends on SCSI_LASI700 877 default y 878 879config SCSI_STEX 880 tristate "Promise SuperTrak EX Series support" 881 depends on PCI && SCSI 882 ---help--- 883 This driver supports Promise SuperTrak EX series storage controllers. 884 885 Promise provides Linux RAID configuration utility for these 886 controllers. Please visit <http://www.promise.com> to download. 887 888 To compile this driver as a module, choose M here: the 889 module will be called stex. 890 891config 53C700_BE_BUS 892 bool 893 depends on SCSI_A4000T || SCSI_ZORRO7XX || MVME16x_SCSI || BVME6000_SCSI 894 default y 895 896config SCSI_SYM53C8XX_2 897 tristate "SYM53C8XX Version 2 SCSI support" 898 depends on PCI && SCSI 899 select SCSI_SPI_ATTRS 900 ---help--- 901 This driver supports the whole NCR53C8XX/SYM53C8XX family of 902 PCI-SCSI controllers. It also supports the subset of LSI53C10XX 903 Ultra-160 controllers that are based on the SYM53C8XX SCRIPTS 904 language. It does not support LSI53C10XX Ultra-320 PCI-X SCSI 905 controllers; you need to use the Fusion MPT driver for that. 906 907 Please read <file:Documentation/scsi/sym53c8xx_2.txt> for more 908 information. 909 910config SCSI_SYM53C8XX_DMA_ADDRESSING_MODE 911 int "DMA addressing mode" 912 depends on SCSI_SYM53C8XX_2 913 default "1" 914 ---help--- 915 This option only applies to PCI-SCSI chips that are PCI DAC 916 capable (875A, 895A, 896, 1010-33, 1010-66, 1000). 917 918 When set to 0, the driver will program the chip to only perform 919 32-bit DMA. When set to 1, the chip will be able to perform DMA 920 to addresses up to 1TB. When set to 2, the driver supports the 921 full 64-bit DMA address range, but can only address 16 segments 922 of 4 GB each. This limits the total addressable range to 64 GB. 923 924 Most machines with less than 4GB of memory should use a setting 925 of 0 for best performance. If your machine has 4GB of memory 926 or more, you should set this option to 1 (the default). 927 928 The still experimental value 2 (64 bit DMA addressing with 16 929 x 4GB segments limitation) can be used on systems that require 930 PCI address bits past bit 39 to be set for the addressing of 931 memory using PCI DAC cycles. 932 933config SCSI_SYM53C8XX_DEFAULT_TAGS 934 int "Default tagged command queue depth" 935 depends on SCSI_SYM53C8XX_2 936 default "16" 937 help 938 This is the default value of the command queue depth the 939 driver will announce to the generic SCSI layer for devices 940 that support tagged command queueing. This value can be changed 941 from the boot command line. This is a soft limit that cannot 942 exceed CONFIG_SCSI_SYM53C8XX_MAX_TAGS. 943 944config SCSI_SYM53C8XX_MAX_TAGS 945 int "Maximum number of queued commands" 946 depends on SCSI_SYM53C8XX_2 947 default "64" 948 help 949 This option allows you to specify the maximum number of commands 950 that can be queued to any device, when tagged command queuing is 951 possible. The driver supports up to 256 queued commands per device. 952 This value is used as a compiled-in hard limit. 953 954config SCSI_SYM53C8XX_MMIO 955 bool "Use memory mapped IO" 956 depends on SCSI_SYM53C8XX_2 957 default y 958 help 959 Memory mapped IO is faster than Port IO. Most people should 960 answer Y here, but some machines may have problems. If you have 961 to answer N here, please report the problem to the maintainer. 962 963config SCSI_IPR 964 tristate "IBM Power Linux RAID adapter support" 965 depends on PCI && SCSI && ATA 966 select FW_LOADER 967 select IRQ_POLL 968 select SGL_ALLOC 969 ---help--- 970 This driver supports the IBM Power Linux family RAID adapters. 971 This includes IBM pSeries 5712, 5703, 5709, and 570A, as well 972 as IBM iSeries 5702, 5703, 5709, and 570A. 973 974config SCSI_IPR_TRACE 975 bool "enable driver internal trace" 976 depends on SCSI_IPR 977 default y 978 help 979 If you say Y here, the driver will trace all commands issued 980 to the adapter. Performance impact is minimal. Trace can be 981 dumped using /sys/bus/class/scsi_host/hostXX/trace. 982 983config SCSI_IPR_DUMP 984 bool "enable adapter dump support" 985 depends on SCSI_IPR 986 default y 987 help 988 If you say Y here, the driver will support adapter crash dump. 989 If you enable this support, the iprdump daemon can be used 990 to capture adapter failure analysis information. 991 992config SCSI_ZALON 993 tristate "Zalon SCSI support" 994 depends on GSC && SCSI 995 select SCSI_SPI_ATTRS 996 help 997 The Zalon is a GSC/HSC bus interface chip that sits between the 998 PA-RISC processor and the NCR 53c720 SCSI controller on C100, 999 C110, J200, J210 and some D, K & R-class machines. It's also 1000 used on the add-in Bluefish, Barracuda & Shrike SCSI cards. 1001 Say Y here if you have one of these machines or cards. 1002 1003config SCSI_NCR_Q720 1004 tristate "NCR Quad 720 MCA SCSI support" 1005 depends on MCA && SCSI 1006 select SCSI_SPI_ATTRS 1007 help 1008 This is a driver for the MicroChannel Quad 720 card produced by 1009 NCR and commonly used in 345x/35xx/4100 class machines. It always 1010 tries to negotiate sync and uses tag command queueing. 1011 1012 Unless you have an NCR manufactured machine, the chances are that 1013 you do not have this SCSI card, so say N. 1014 1015config SCSI_NCR53C8XX_DEFAULT_TAGS 1016 int "default tagged command queue depth" 1017 depends on SCSI_ZALON || SCSI_NCR_Q720 1018 default "8" 1019 ---help--- 1020 "Tagged command queuing" is a feature of SCSI-2 which improves 1021 performance: the host adapter can send several SCSI commands to a 1022 device's queue even if previous commands haven't finished yet. 1023 Because the device is intelligent, it can optimize its operations 1024 (like head positioning) based on its own request queue. Some SCSI 1025 devices don't implement this properly; if you want to disable this 1026 feature, enter 0 or 1 here (it doesn't matter which). 1027 1028 The default value is 8 and should be supported by most hard disks. 1029 This value can be overridden from the boot command line using the 1030 'tags' option as follows (example): 1031 'ncr53c8xx=tags:4/t2t3q16/t0u2q10' will set default queue depth to 1032 4, set queue depth to 16 for target 2 and target 3 on controller 0 1033 and set queue depth to 10 for target 0 / lun 2 on controller 1. 1034 1035 The normal answer therefore is to go with the default 8 and to use 1036 a boot command line option for devices that need to use a different 1037 command queue depth. 1038 1039 There is no safe option other than using good SCSI devices. 1040 1041config SCSI_NCR53C8XX_MAX_TAGS 1042 int "maximum number of queued commands" 1043 depends on SCSI_ZALON || SCSI_NCR_Q720 1044 default "32" 1045 ---help--- 1046 This option allows you to specify the maximum number of commands 1047 that can be queued to any device, when tagged command queuing is 1048 possible. The default value is 32. Minimum is 2, maximum is 64. 1049 Modern hard disks are able to support 64 tags and even more, but 1050 do not seem to be faster when more than 32 tags are being used. 1051 1052 So, the normal answer here is to go with the default value 32 unless 1053 you are using very large hard disks with large cache (>= 1 MB) that 1054 are able to take advantage of more than 32 tagged commands. 1055 1056 There is no safe option and the default answer is recommended. 1057 1058config SCSI_NCR53C8XX_SYNC 1059 int "synchronous transfers frequency in MHz" 1060 depends on SCSI_ZALON || SCSI_NCR_Q720 1061 default "20" 1062 ---help--- 1063 The SCSI Parallel Interface-2 Standard defines 5 classes of transfer 1064 rates: FAST-5, FAST-10, FAST-20, FAST-40 and FAST-80. The numbers 1065 are respectively the maximum data transfer rates in mega-transfers 1066 per second for each class. For example, a FAST-20 Wide 16 device is 1067 able to transfer data at 20 million 16 bit packets per second for a 1068 total rate of 40 MB/s. 1069 1070 You may specify 0 if you want to only use asynchronous data 1071 transfers. This is the safest and slowest option. Otherwise, specify 1072 a value between 5 and 80, depending on the capability of your SCSI 1073 controller. The higher the number, the faster the data transfer. 1074 Note that 80 should normally be ok since the driver decreases the 1075 value automatically according to the controller's capabilities. 1076 1077 Your answer to this question is ignored for controllers with NVRAM, 1078 since the driver will get this information from the user set-up. It 1079 also can be overridden using a boot setup option, as follows 1080 (example): 'ncr53c8xx=sync:12' will allow the driver to negotiate 1081 for FAST-20 synchronous data transfer (20 mega-transfers per 1082 second). 1083 1084 The normal answer therefore is not to go with the default but to 1085 select the maximum value 80 allowing the driver to use the maximum 1086 value supported by each controller. If this causes problems with 1087 your SCSI devices, you should come back and decrease the value. 1088 1089 There is no safe option other than using good cabling, right 1090 terminations and SCSI conformant devices. 1091 1092config SCSI_NCR53C8XX_NO_DISCONNECT 1093 bool "not allow targets to disconnect" 1094 depends on (SCSI_ZALON || SCSI_NCR_Q720) && SCSI_NCR53C8XX_DEFAULT_TAGS=0 1095 help 1096 This option is only provided for safety if you suspect some SCSI 1097 device of yours to not support properly the target-disconnect 1098 feature. In that case, you would say Y here. In general however, to 1099 not allow targets to disconnect is not reasonable if there is more 1100 than 1 device on a SCSI bus. The normal answer therefore is N. 1101 1102config SCSI_QLOGIC_FAS 1103 tristate "Qlogic FAS SCSI support" 1104 depends on ISA && SCSI 1105 ---help--- 1106 This is a driver for the ISA, VLB, and PCMCIA versions of the Qlogic 1107 FastSCSI! cards as well as any other card based on the FASXX chip 1108 (including the Control Concepts SCSI/IDE/SIO/PIO/FDC cards). 1109 1110 This driver does NOT support the PCI versions of these cards. The 1111 PCI versions are supported by the Qlogic ISP driver ("Qlogic ISP 1112 SCSI support"), below. 1113 1114 Information about this driver is contained in 1115 <file:Documentation/scsi/qlogicfas.txt>. You should also read the 1116 SCSI-HOWTO, available from 1117 <http://www.tldp.org/docs.html#howto>. 1118 1119 To compile this driver as a module, choose M here: the 1120 module will be called qlogicfas. 1121 1122config SCSI_QLOGIC_1280 1123 tristate "Qlogic QLA 1240/1x80/1x160 SCSI support" 1124 depends on PCI && SCSI 1125 help 1126 Say Y if you have a QLogic ISP1240/1x80/1x160 SCSI host adapter. 1127 1128 To compile this driver as a module, choose M here: the 1129 module will be called qla1280. 1130 1131config SCSI_QLOGICPTI 1132 tristate "PTI Qlogic, ISP Driver" 1133 depends on SBUS && SCSI 1134 help 1135 This driver supports SBUS SCSI controllers from PTI or QLogic. These 1136 controllers are known under Solaris as qpti and in the openprom as 1137 PTI,ptisp or QLGC,isp. Note that PCI QLogic SCSI controllers are 1138 driven by a different driver. 1139 1140 To compile this driver as a module, choose M here: the 1141 module will be called qlogicpti. 1142 1143source "drivers/scsi/qla2xxx/Kconfig" 1144source "drivers/scsi/qla4xxx/Kconfig" 1145source "drivers/scsi/qedi/Kconfig" 1146source "drivers/scsi/qedf/Kconfig" 1147 1148config SCSI_LPFC 1149 tristate "Emulex LightPulse Fibre Channel Support" 1150 depends on PCI && SCSI 1151 depends on SCSI_FC_ATTRS 1152 depends on NVME_TARGET_FC || NVME_TARGET_FC=n 1153 depends on NVME_FC || NVME_FC=n 1154 select CRC_T10DIF 1155 ---help--- 1156 This lpfc driver supports the Emulex LightPulse 1157 Family of Fibre Channel PCI host adapters. 1158 1159config SCSI_LPFC_DEBUG_FS 1160 bool "Emulex LightPulse Fibre Channel debugfs Support" 1161 depends on SCSI_LPFC && DEBUG_FS 1162 ---help--- 1163 This makes debugging information from the lpfc driver 1164 available via the debugfs filesystem. 1165 1166config SCSI_SIM710 1167 tristate "Simple 53c710 SCSI support (Compaq, NCR machines)" 1168 depends on (EISA || MCA) && SCSI 1169 select SCSI_SPI_ATTRS 1170 ---help--- 1171 This driver is for NCR53c710 based SCSI host adapters. 1172 1173 It currently supports Compaq EISA cards and NCR MCA cards 1174 1175config SCSI_DC395x 1176 tristate "Tekram DC395(U/UW/F) and DC315(U) SCSI support" 1177 depends on PCI && SCSI 1178 ---help--- 1179 This driver supports PCI SCSI host adapters based on the ASIC 1180 TRM-S1040 chip, e.g Tekram DC395(U/UW/F) and DC315(U) variants. 1181 1182 This driver works, but is still in experimental status. So better 1183 have a bootable disk and a backup in case of emergency. 1184 1185 Documentation can be found in <file:Documentation/scsi/dc395x.txt>. 1186 1187 To compile this driver as a module, choose M here: the 1188 module will be called dc395x. 1189 1190config SCSI_AM53C974 1191 tristate "Tekram DC390(T) and Am53/79C974 SCSI support (new driver)" 1192 depends on PCI && SCSI 1193 select SCSI_SPI_ATTRS 1194 ---help--- 1195 This driver supports PCI SCSI host adapters based on the Am53C974A 1196 chip, e.g. Tekram DC390(T), DawiControl 2974 and some onboard 1197 PCscsi/PCnet (Am53/79C974) solutions. 1198 This is a new implementation base on the generic esp_scsi driver. 1199 1200 Documentation can be found in <file:Documentation/scsi/tmscsim.txt>. 1201 1202 Note that this driver does NOT support Tekram DC390W/U/F, which are 1203 based on NCR/Symbios chips. Use "NCR53C8XX SCSI support" for those. 1204 1205 To compile this driver as a module, choose M here: the 1206 module will be called am53c974. 1207 1208config SCSI_NSP32 1209 tristate "Workbit NinjaSCSI-32Bi/UDE support" 1210 depends on PCI && SCSI && !64BIT 1211 help 1212 This is support for the Workbit NinjaSCSI-32Bi/UDE PCI/Cardbus 1213 SCSI host adapter. Please read the SCSI-HOWTO, available from 1214 <http://www.tldp.org/docs.html#howto>. 1215 1216 To compile this driver as a module, choose M here: the 1217 module will be called nsp32. 1218 1219config SCSI_WD719X 1220 tristate "Western Digital WD7193/7197/7296 support" 1221 depends on PCI && SCSI 1222 select EEPROM_93CX6 1223 ---help--- 1224 This is a driver for Western Digital WD7193, WD7197 and WD7296 PCI 1225 SCSI controllers (based on WD33C296A chip). 1226 1227config SCSI_DEBUG 1228 tristate "SCSI debugging host and device simulator" 1229 depends on SCSI 1230 select CRC_T10DIF 1231 help 1232 This pseudo driver simulates one or more hosts (SCSI initiators), 1233 each with one or more targets, each with one or more logical units. 1234 Defaults to one of each, creating a small RAM disk device. Many 1235 parameters found in the /sys/bus/pseudo/drivers/scsi_debug 1236 directory can be tweaked at run time. 1237 See <http://sg.danny.cz/sg/sdebug26.html> for more information. 1238 Mainly used for testing and best as a module. If unsure, say N. 1239 1240config SCSI_MESH 1241 tristate "MESH (Power Mac internal SCSI) support" 1242 depends on PPC32 && PPC_PMAC && SCSI 1243 help 1244 Many Power Macintoshes and clones have a MESH (Macintosh Enhanced 1245 SCSI Hardware) SCSI bus adaptor (the 7200 doesn't, but all of the 1246 other Power Macintoshes do). Say Y to include support for this SCSI 1247 adaptor. 1248 1249 To compile this driver as a module, choose M here: the 1250 module will be called mesh. 1251 1252config SCSI_MESH_SYNC_RATE 1253 int "maximum synchronous transfer rate (MB/s) (0 = async)" 1254 depends on SCSI_MESH 1255 default "5" 1256 help 1257 On Power Macintoshes (and clones) where the MESH SCSI bus adaptor 1258 drives a bus which is entirely internal to the machine (such as the 1259 7500, 7600, 8500, etc.), the MESH is capable of synchronous 1260 operation at up to 10 MB/s. On machines where the SCSI bus 1261 controlled by the MESH can have external devices connected, it is 1262 usually rated at 5 MB/s. 5 is a safe value here unless you know the 1263 MESH SCSI bus is internal only; in that case you can say 10. Say 0 1264 to disable synchronous operation. 1265 1266config SCSI_MESH_RESET_DELAY_MS 1267 int "initial bus reset delay (ms) (0 = no reset)" 1268 depends on SCSI_MESH 1269 default "4000" 1270 1271config SCSI_MAC53C94 1272 tristate "53C94 (Power Mac external SCSI) support" 1273 depends on PPC32 && PPC_PMAC && SCSI 1274 help 1275 On Power Macintoshes (and clones) with two SCSI buses, the external 1276 SCSI bus is usually controlled by a 53C94 SCSI bus adaptor. Older 1277 machines which only have one SCSI bus, such as the 7200, also use 1278 the 53C94. Say Y to include support for the 53C94. 1279 1280 To compile this driver as a module, choose M here: the 1281 module will be called mac53c94. 1282 1283source "drivers/scsi/arm/Kconfig" 1284 1285config JAZZ_ESP 1286 bool "MIPS JAZZ FAS216 SCSI support" 1287 depends on MACH_JAZZ && SCSI 1288 select SCSI_SPI_ATTRS 1289 help 1290 This is the driver for the onboard SCSI host adapter of MIPS Magnum 1291 4000, Acer PICA, Olivetti M700-10 and a few other identical OEM 1292 systems. 1293 1294config A3000_SCSI 1295 tristate "A3000 WD33C93A support" 1296 depends on AMIGA && SCSI 1297 help 1298 If you have an Amiga 3000 and have SCSI devices connected to the 1299 built-in SCSI controller, say Y. Otherwise, say N. 1300 1301 To compile this driver as a module, choose M here: the 1302 module will be called a3000. 1303 1304config A2091_SCSI 1305 tristate "A2091/A590 WD33C93A support" 1306 depends on ZORRO && SCSI 1307 help 1308 If you have a Commodore A2091 SCSI controller, say Y. Otherwise, 1309 say N. 1310 1311 To compile this driver as a module, choose M here: the 1312 module will be called a2091. 1313 1314config GVP11_SCSI 1315 tristate "GVP Series II WD33C93A support" 1316 depends on ZORRO && SCSI 1317 ---help--- 1318 If you have a Great Valley Products Series II SCSI controller, 1319 answer Y. Also say Y if you have a later model of GVP SCSI 1320 controller (such as the GVP A4008 or a Combo board). Otherwise, 1321 answer N. This driver does NOT work for the T-Rex series of 1322 accelerators from TekMagic and GVP-M. 1323 1324 To compile this driver as a module, choose M here: the 1325 module will be called gvp11. 1326 1327config SCSI_A4000T 1328 tristate "A4000T NCR53c710 SCSI support" 1329 depends on AMIGA && SCSI 1330 select SCSI_SPI_ATTRS 1331 help 1332 If you have an Amiga 4000T and have SCSI devices connected to the 1333 built-in SCSI controller, say Y. Otherwise, say N. 1334 1335 To compile this driver as a module, choose M here: the 1336 module will be called a4000t. 1337 1338config SCSI_ZORRO7XX 1339 tristate "Zorro NCR53c710 SCSI support" 1340 depends on ZORRO && SCSI 1341 select SCSI_SPI_ATTRS 1342 help 1343 Support for various NCR53c710-based SCSI controllers on Zorro 1344 expansion boards for the Amiga. 1345 This includes: 1346 - the Amiga 4091 Zorro III SCSI-2 controller, 1347 - the MacroSystem Development's WarpEngine Amiga SCSI-2 controller 1348 (info at 1349 <http://www.lysator.liu.se/amiga/ar/guide/ar310.guide?FEATURE5>), 1350 - the SCSI controller on the Phase5 Blizzard PowerUP 603e+ 1351 accelerator card for the Amiga 1200, 1352 - the SCSI controller on the GVP Turbo 040/060 accelerator. 1353 1354config ATARI_SCSI 1355 tristate "Atari native SCSI support" 1356 depends on ATARI && SCSI 1357 select SCSI_SPI_ATTRS 1358 select NVRAM 1359 ---help--- 1360 If you have an Atari with built-in NCR5380 SCSI controller (TT, 1361 Falcon, ...) say Y to get it supported. Of course also, if you have 1362 a compatible SCSI controller (e.g. for Medusa). 1363 1364 To compile this driver as a module, choose M here: the 1365 module will be called atari_scsi. 1366 1367 This driver supports both styles of NCR integration into the 1368 system: the TT style (separate DMA), and the Falcon style (via 1369 ST-DMA, replacing ACSI). It does NOT support other schemes, like 1370 in the Hades (without DMA). 1371 1372config MAC_SCSI 1373 tristate "Macintosh NCR5380 SCSI" 1374 depends on MAC && SCSI 1375 select SCSI_SPI_ATTRS 1376 help 1377 This is the NCR 5380 SCSI controller included on most of the 68030 1378 based Macintoshes. If you have one of these say Y and read the 1379 SCSI-HOWTO, available from 1380 <http://www.tldp.org/docs.html#howto>. 1381 1382config SCSI_MAC_ESP 1383 tristate "Macintosh NCR53c9[46] SCSI" 1384 depends on MAC && SCSI 1385 select SCSI_SPI_ATTRS 1386 help 1387 This is the NCR 53c9x SCSI controller found on most of the 68040 1388 based Macintoshes. 1389 1390 To compile this driver as a module, choose M here: the module 1391 will be called mac_esp. 1392 1393config MVME147_SCSI 1394 bool "WD33C93 SCSI driver for MVME147" 1395 depends on MVME147 && SCSI=y 1396 select SCSI_SPI_ATTRS 1397 help 1398 Support for the on-board SCSI controller on the Motorola MVME147 1399 single-board computer. 1400 1401config MVME16x_SCSI 1402 tristate "NCR53C710 SCSI driver for MVME16x" 1403 depends on MVME16x && SCSI 1404 select SCSI_SPI_ATTRS 1405 help 1406 The Motorola MVME162, 166, 167, 172 and 177 boards use the NCR53C710 1407 SCSI controller chip. Almost everyone using one of these boards 1408 will want to say Y to this question. 1409 1410config BVME6000_SCSI 1411 tristate "NCR53C710 SCSI driver for BVME6000" 1412 depends on BVME6000 && SCSI 1413 select SCSI_SPI_ATTRS 1414 help 1415 The BVME4000 and BVME6000 boards from BVM Ltd use the NCR53C710 1416 SCSI controller chip. Almost everyone using one of these boards 1417 will want to say Y to this question. 1418 1419config SUN3_SCSI 1420 tristate "Sun3 NCR5380 SCSI" 1421 depends on SUN3 && SCSI 1422 select SCSI_SPI_ATTRS 1423 help 1424 This option will enable support for the OBIO (onboard io) NCR5380 1425 SCSI controller found in the Sun 3/50 and 3/60, as well as for 1426 "Sun3" type VME scsi controllers also based on the NCR5380. 1427 General Linux information on the Sun 3 series (now discontinued) 1428 is at <http://www.angelfire.com/ca2/tech68k/sun3.html>. 1429 1430config SUN3X_ESP 1431 bool "Sun3x ESP SCSI" 1432 depends on SUN3X && SCSI=y 1433 select SCSI_SPI_ATTRS 1434 help 1435 The ESP was an on-board SCSI controller used on Sun 3/80 1436 machines. Say Y here to compile in support for it. 1437 1438config SCSI_SUNESP 1439 tristate "Sparc ESP Scsi Driver" 1440 depends on SBUS && SCSI 1441 select SCSI_SPI_ATTRS 1442 help 1443 This is the driver for the Sun ESP SCSI host adapter. The ESP 1444 chipset is present in most SPARC SBUS-based computers and 1445 supports the Emulex family of ESP SCSI chips (esp100, esp100A, 1446 esp236, fas101, fas236) as well as the Qlogic fas366 SCSI chip. 1447 1448 To compile this driver as a module, choose M here: the 1449 module will be called sun_esp. 1450 1451config ZFCP 1452 tristate "FCP host bus adapter driver for IBM eServer zSeries" 1453 depends on S390 && QDIO && SCSI 1454 depends on SCSI_FC_ATTRS 1455 help 1456 If you want to access SCSI devices attached to your IBM eServer 1457 zSeries by means of Fibre Channel interfaces say Y. 1458 For details please refer to the documentation provided by IBM at 1459 <http://oss.software.ibm.com/developerworks/opensource/linux390> 1460 1461 This driver is also available as a module. This module will be 1462 called zfcp. If you want to compile it as a module, say M here 1463 and read <file:Documentation/kbuild/modules.txt>. 1464 1465config SCSI_PMCRAID 1466 tristate "PMC SIERRA Linux MaxRAID adapter support" 1467 depends on PCI && SCSI && NET 1468 select SGL_ALLOC 1469 ---help--- 1470 This driver supports the PMC SIERRA MaxRAID adapters. 1471 1472config SCSI_PM8001 1473 tristate "PMC-Sierra SPC 8001 SAS/SATA Based Host Adapter driver" 1474 depends on PCI && SCSI 1475 select SCSI_SAS_LIBSAS 1476 help 1477 This driver supports PMC-Sierra PCIE SAS/SATA 8x6G SPC 8001 chip 1478 based host adapters. 1479 1480config SCSI_BFA_FC 1481 tristate "Brocade BFA Fibre Channel Support" 1482 depends on PCI && SCSI 1483 depends on SCSI_FC_ATTRS 1484 help 1485 This bfa driver supports all Brocade PCIe FC/FCOE host adapters. 1486 1487 To compile this driver as a module, choose M here. The module will 1488 be called bfa. 1489 1490config SCSI_VIRTIO 1491 tristate "virtio-scsi support" 1492 depends on VIRTIO 1493 help 1494 This is the virtual HBA driver for virtio. If the kernel will 1495 be used in a virtual machine, say Y or M. 1496 1497source "drivers/scsi/csiostor/Kconfig" 1498 1499endif # SCSI_LOWLEVEL 1500 1501source "drivers/scsi/pcmcia/Kconfig" 1502 1503source "drivers/scsi/device_handler/Kconfig" 1504 1505source "drivers/scsi/osd/Kconfig" 1506 1507endmenu 1508