1 /* 2 Copyright (C) 2004 - 2009 Ivo van Doorn <IvDoorn@gmail.com> 3 <http://rt2x00.serialmonkey.com> 4 5 This program is free software; you can redistribute it and/or modify 6 it under the terms of the GNU General Public License as published by 7 the Free Software Foundation; either version 2 of the License, or 8 (at your option) any later version. 9 10 This program is distributed in the hope that it will be useful, 11 but WITHOUT ANY WARRANTY; without even the implied warranty of 12 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 13 GNU General Public License for more details. 14 15 You should have received a copy of the GNU General Public License 16 along with this program; if not, see <http://www.gnu.org/licenses/>. 17 */ 18 19 /* 20 Module: rt2x00usb 21 Abstract: Data structures for the rt2x00usb module. 22 */ 23 24 #ifndef RT2X00USB_H 25 #define RT2X00USB_H 26 27 #include <linux/usb.h> 28 29 #define to_usb_device_intf(d) \ 30 ({ \ 31 struct usb_interface *intf = to_usb_interface(d); \ 32 interface_to_usbdev(intf); \ 33 }) 34 35 /* 36 * For USB vendor requests we need to pass a timeout time in ms, for this we 37 * use the REGISTER_TIMEOUT, however when loading firmware or read EEPROM 38 * a higher value is required. In that case we use the REGISTER_TIMEOUT_FIRMWARE 39 * and EEPROM_TIMEOUT. 40 */ 41 #define REGISTER_TIMEOUT 100 42 #define REGISTER_TIMEOUT_FIRMWARE 1000 43 #define EEPROM_TIMEOUT 2000 44 45 /* 46 * Cache size 47 */ 48 #define CSR_CACHE_SIZE 64 49 50 /* 51 * USB request types. 52 */ 53 #define USB_VENDOR_REQUEST ( USB_TYPE_VENDOR | USB_RECIP_DEVICE ) 54 #define USB_VENDOR_REQUEST_IN ( USB_DIR_IN | USB_VENDOR_REQUEST ) 55 #define USB_VENDOR_REQUEST_OUT ( USB_DIR_OUT | USB_VENDOR_REQUEST ) 56 57 /** 58 * enum rt2x00usb_vendor_request: USB vendor commands. 59 */ 60 enum rt2x00usb_vendor_request { 61 USB_DEVICE_MODE = 1, 62 USB_SINGLE_WRITE = 2, 63 USB_SINGLE_READ = 3, 64 USB_MULTI_WRITE = 6, 65 USB_MULTI_READ = 7, 66 USB_EEPROM_WRITE = 8, 67 USB_EEPROM_READ = 9, 68 USB_LED_CONTROL = 10, /* RT73USB */ 69 USB_RX_CONTROL = 12, 70 }; 71 72 /** 73 * enum rt2x00usb_mode_offset: Device modes offset. 74 */ 75 enum rt2x00usb_mode_offset { 76 USB_MODE_RESET = 1, 77 USB_MODE_UNPLUG = 2, 78 USB_MODE_FUNCTION = 3, 79 USB_MODE_TEST = 4, 80 USB_MODE_SLEEP = 7, /* RT73USB */ 81 USB_MODE_FIRMWARE = 8, /* RT73USB */ 82 USB_MODE_WAKEUP = 9, /* RT73USB */ 83 USB_MODE_AUTORUN = 17, /* RT2800USB */ 84 }; 85 86 /** 87 * rt2x00usb_vendor_request - Send register command to device 88 * @rt2x00dev: Pointer to &struct rt2x00_dev 89 * @request: USB vendor command (See &enum rt2x00usb_vendor_request) 90 * @requesttype: Request type &USB_VENDOR_REQUEST_* 91 * @offset: Register offset to perform action on 92 * @value: Value to write to device 93 * @buffer: Buffer where information will be read/written to by device 94 * @buffer_length: Size of &buffer 95 * @timeout: Operation timeout 96 * 97 * This is the main function to communicate with the device, 98 * the &buffer argument _must_ either be NULL or point to 99 * a buffer allocated by kmalloc. Failure to do so can lead 100 * to unexpected behavior depending on the architecture. 101 */ 102 int rt2x00usb_vendor_request(struct rt2x00_dev *rt2x00dev, 103 const u8 request, const u8 requesttype, 104 const u16 offset, const u16 value, 105 void *buffer, const u16 buffer_length, 106 const int timeout); 107 108 /** 109 * rt2x00usb_vendor_request_buff - Send register command to device (buffered) 110 * @rt2x00dev: Pointer to &struct rt2x00_dev 111 * @request: USB vendor command (See &enum rt2x00usb_vendor_request) 112 * @requesttype: Request type &USB_VENDOR_REQUEST_* 113 * @offset: Register offset to perform action on 114 * @buffer: Buffer where information will be read/written to by device 115 * @buffer_length: Size of &buffer 116 * 117 * This function will use a previously with kmalloc allocated cache 118 * to communicate with the device. The contents of the buffer pointer 119 * will be copied to this cache when writing, or read from the cache 120 * when reading. 121 * Buffers send to &rt2x00usb_vendor_request _must_ be allocated with 122 * kmalloc. Hence the reason for using a previously allocated cache 123 * which has been allocated properly. 124 */ 125 int rt2x00usb_vendor_request_buff(struct rt2x00_dev *rt2x00dev, 126 const u8 request, const u8 requesttype, 127 const u16 offset, void *buffer, 128 const u16 buffer_length); 129 130 /** 131 * rt2x00usb_vendor_request_buff - Send register command to device (buffered) 132 * @rt2x00dev: Pointer to &struct rt2x00_dev 133 * @request: USB vendor command (See &enum rt2x00usb_vendor_request) 134 * @requesttype: Request type &USB_VENDOR_REQUEST_* 135 * @offset: Register offset to perform action on 136 * @buffer: Buffer where information will be read/written to by device 137 * @buffer_length: Size of &buffer 138 * @timeout: Operation timeout 139 * 140 * A version of &rt2x00usb_vendor_request_buff which must be called 141 * if the usb_cache_mutex is already held. 142 */ 143 int rt2x00usb_vendor_req_buff_lock(struct rt2x00_dev *rt2x00dev, 144 const u8 request, const u8 requesttype, 145 const u16 offset, void *buffer, 146 const u16 buffer_length, const int timeout); 147 148 /** 149 * rt2x00usb_vendor_request_sw - Send single register command to device 150 * @rt2x00dev: Pointer to &struct rt2x00_dev 151 * @request: USB vendor command (See &enum rt2x00usb_vendor_request) 152 * @offset: Register offset to perform action on 153 * @value: Value to write to device 154 * @timeout: Operation timeout 155 * 156 * Simple wrapper around rt2x00usb_vendor_request to write a single 157 * command to the device. Since we don't use the buffer argument we 158 * don't have to worry about kmalloc here. 159 */ 160 static inline int rt2x00usb_vendor_request_sw(struct rt2x00_dev *rt2x00dev, 161 const u8 request, 162 const u16 offset, 163 const u16 value, 164 const int timeout) 165 { 166 return rt2x00usb_vendor_request(rt2x00dev, request, 167 USB_VENDOR_REQUEST_OUT, offset, 168 value, NULL, 0, timeout); 169 } 170 171 /** 172 * rt2x00usb_eeprom_read - Read eeprom from device 173 * @rt2x00dev: Pointer to &struct rt2x00_dev 174 * @eeprom: Pointer to eeprom array to store the information in 175 * @length: Number of bytes to read from the eeprom 176 * 177 * Simple wrapper around rt2x00usb_vendor_request to read the eeprom 178 * from the device. Note that the eeprom argument _must_ be allocated using 179 * kmalloc for correct handling inside the kernel USB layer. 180 */ 181 static inline int rt2x00usb_eeprom_read(struct rt2x00_dev *rt2x00dev, 182 __le16 *eeprom, const u16 length) 183 { 184 return rt2x00usb_vendor_request(rt2x00dev, USB_EEPROM_READ, 185 USB_VENDOR_REQUEST_IN, 0, 0, 186 eeprom, length, EEPROM_TIMEOUT); 187 } 188 189 /** 190 * rt2x00usb_register_read - Read 32bit register word 191 * @rt2x00dev: Device pointer, see &struct rt2x00_dev. 192 * @offset: Register offset 193 * @value: Pointer to where register contents should be stored 194 * 195 * This function is a simple wrapper for 32bit register access 196 * through rt2x00usb_vendor_request_buff(). 197 */ 198 static inline void rt2x00usb_register_read(struct rt2x00_dev *rt2x00dev, 199 const unsigned int offset, 200 u32 *value) 201 { 202 __le32 reg = 0; 203 rt2x00usb_vendor_request_buff(rt2x00dev, USB_MULTI_READ, 204 USB_VENDOR_REQUEST_IN, offset, 205 ®, sizeof(reg)); 206 *value = le32_to_cpu(reg); 207 } 208 209 /** 210 * rt2x00usb_register_read_lock - Read 32bit register word 211 * @rt2x00dev: Device pointer, see &struct rt2x00_dev. 212 * @offset: Register offset 213 * @value: Pointer to where register contents should be stored 214 * 215 * This function is a simple wrapper for 32bit register access 216 * through rt2x00usb_vendor_req_buff_lock(). 217 */ 218 static inline void rt2x00usb_register_read_lock(struct rt2x00_dev *rt2x00dev, 219 const unsigned int offset, 220 u32 *value) 221 { 222 __le32 reg = 0; 223 rt2x00usb_vendor_req_buff_lock(rt2x00dev, USB_MULTI_READ, 224 USB_VENDOR_REQUEST_IN, offset, 225 ®, sizeof(reg), REGISTER_TIMEOUT); 226 *value = le32_to_cpu(reg); 227 } 228 229 /** 230 * rt2x00usb_register_multiread - Read 32bit register words 231 * @rt2x00dev: Device pointer, see &struct rt2x00_dev. 232 * @offset: Register offset 233 * @value: Pointer to where register contents should be stored 234 * @length: Length of the data 235 * 236 * This function is a simple wrapper for 32bit register access 237 * through rt2x00usb_vendor_request_buff(). 238 */ 239 static inline void rt2x00usb_register_multiread(struct rt2x00_dev *rt2x00dev, 240 const unsigned int offset, 241 void *value, const u32 length) 242 { 243 rt2x00usb_vendor_request_buff(rt2x00dev, USB_MULTI_READ, 244 USB_VENDOR_REQUEST_IN, offset, 245 value, length); 246 } 247 248 /** 249 * rt2x00usb_register_write - Write 32bit register word 250 * @rt2x00dev: Device pointer, see &struct rt2x00_dev. 251 * @offset: Register offset 252 * @value: Data which should be written 253 * 254 * This function is a simple wrapper for 32bit register access 255 * through rt2x00usb_vendor_request_buff(). 256 */ 257 static inline void rt2x00usb_register_write(struct rt2x00_dev *rt2x00dev, 258 const unsigned int offset, 259 u32 value) 260 { 261 __le32 reg = cpu_to_le32(value); 262 rt2x00usb_vendor_request_buff(rt2x00dev, USB_MULTI_WRITE, 263 USB_VENDOR_REQUEST_OUT, offset, 264 ®, sizeof(reg)); 265 } 266 267 /** 268 * rt2x00usb_register_write_lock - Write 32bit register word 269 * @rt2x00dev: Device pointer, see &struct rt2x00_dev. 270 * @offset: Register offset 271 * @value: Data which should be written 272 * 273 * This function is a simple wrapper for 32bit register access 274 * through rt2x00usb_vendor_req_buff_lock(). 275 */ 276 static inline void rt2x00usb_register_write_lock(struct rt2x00_dev *rt2x00dev, 277 const unsigned int offset, 278 u32 value) 279 { 280 __le32 reg = cpu_to_le32(value); 281 rt2x00usb_vendor_req_buff_lock(rt2x00dev, USB_MULTI_WRITE, 282 USB_VENDOR_REQUEST_OUT, offset, 283 ®, sizeof(reg), REGISTER_TIMEOUT); 284 } 285 286 /** 287 * rt2x00usb_register_multiwrite - Write 32bit register words 288 * @rt2x00dev: Device pointer, see &struct rt2x00_dev. 289 * @offset: Register offset 290 * @value: Data which should be written 291 * @length: Length of the data 292 * 293 * This function is a simple wrapper for 32bit register access 294 * through rt2x00usb_vendor_request_buff(). 295 */ 296 static inline void rt2x00usb_register_multiwrite(struct rt2x00_dev *rt2x00dev, 297 const unsigned int offset, 298 const void *value, 299 const u32 length) 300 { 301 rt2x00usb_vendor_request_buff(rt2x00dev, USB_MULTI_WRITE, 302 USB_VENDOR_REQUEST_OUT, offset, 303 (void *)value, length); 304 } 305 306 /** 307 * rt2x00usb_regbusy_read - Read from register with busy check 308 * @rt2x00dev: Device pointer, see &struct rt2x00_dev. 309 * @offset: Register offset 310 * @field: Field to check if register is busy 311 * @reg: Pointer to where register contents should be stored 312 * 313 * This function will read the given register, and checks if the 314 * register is busy. If it is, it will sleep for a couple of 315 * microseconds before reading the register again. If the register 316 * is not read after a certain timeout, this function will return 317 * FALSE. 318 */ 319 int rt2x00usb_regbusy_read(struct rt2x00_dev *rt2x00dev, 320 const unsigned int offset, 321 const struct rt2x00_field32 field, 322 u32 *reg); 323 324 /** 325 * rt2x00usb_register_read_async - Asynchronously read 32bit register word 326 * @rt2x00dev: Device pointer, see &struct rt2x00_dev. 327 * @offset: Register offset 328 * @callback: Functon to call when read completes. 329 * 330 * Submit a control URB to read a 32bit register. This safe to 331 * be called from atomic context. The callback will be called 332 * when the URB completes. Otherwise the function is similar 333 * to rt2x00usb_register_read(). 334 * When the callback function returns false, the memory will be cleaned up, 335 * when it returns true, the urb will be fired again. 336 */ 337 void rt2x00usb_register_read_async(struct rt2x00_dev *rt2x00dev, 338 const unsigned int offset, 339 bool (*callback)(struct rt2x00_dev*, int, u32)); 340 341 /* 342 * Radio handlers 343 */ 344 void rt2x00usb_disable_radio(struct rt2x00_dev *rt2x00dev); 345 346 /** 347 * struct queue_entry_priv_usb: Per entry USB specific information 348 * 349 * @urb: Urb structure used for device communication. 350 */ 351 struct queue_entry_priv_usb { 352 struct urb *urb; 353 }; 354 355 /** 356 * struct queue_entry_priv_usb_bcn: Per TX entry USB specific information 357 * 358 * The first section should match &struct queue_entry_priv_usb exactly. 359 * rt2500usb can use this structure to send a guardian byte when working 360 * with beacons. 361 * 362 * @urb: Urb structure used for device communication. 363 * @guardian_data: Set to 0, used for sending the guardian data. 364 * @guardian_urb: Urb structure used to send the guardian data. 365 */ 366 struct queue_entry_priv_usb_bcn { 367 struct urb *urb; 368 369 unsigned int guardian_data; 370 struct urb *guardian_urb; 371 }; 372 373 /** 374 * rt2x00usb_kick_queue - Kick data queue 375 * @queue: Data queue to kick 376 * 377 * This will walk through all entries of the queue and push all pending 378 * frames to the hardware as a single burst. 379 */ 380 void rt2x00usb_kick_queue(struct data_queue *queue); 381 382 /** 383 * rt2x00usb_flush_queue - Flush data queue 384 * @queue: Data queue to stop 385 * @drop: True to drop all pending frames. 386 * 387 * This will walk through all entries of the queue and will optionally 388 * kill all URB's which were send to the device, or at least wait until 389 * they have been returned from the device.. 390 */ 391 void rt2x00usb_flush_queue(struct data_queue *queue, bool drop); 392 393 /** 394 * rt2x00usb_watchdog - Watchdog for USB communication 395 * @rt2x00dev: Pointer to &struct rt2x00_dev 396 * 397 * Check the health of the USB communication and determine 398 * if timeouts have occurred. If this is the case, this function 399 * will reset all communication to restore functionality again. 400 */ 401 void rt2x00usb_watchdog(struct rt2x00_dev *rt2x00dev); 402 403 /* 404 * Device initialization handlers. 405 */ 406 void rt2x00usb_clear_entry(struct queue_entry *entry); 407 int rt2x00usb_initialize(struct rt2x00_dev *rt2x00dev); 408 void rt2x00usb_uninitialize(struct rt2x00_dev *rt2x00dev); 409 410 /* 411 * USB driver handlers. 412 */ 413 int rt2x00usb_probe(struct usb_interface *usb_intf, 414 const struct rt2x00_ops *ops); 415 void rt2x00usb_disconnect(struct usb_interface *usb_intf); 416 #ifdef CONFIG_PM 417 int rt2x00usb_suspend(struct usb_interface *usb_intf, pm_message_t state); 418 int rt2x00usb_resume(struct usb_interface *usb_intf); 419 #else 420 #define rt2x00usb_suspend NULL 421 #define rt2x00usb_resume NULL 422 #endif /* CONFIG_PM */ 423 424 #endif /* RT2X00USB_H */ 425