xref: /linux/drivers/net/wireless/broadcom/brcm80211/brcmsmac/mac80211_if.c (revision 3ad0876554cafa368f574d4d408468510543e9ff)
1 /*
2  * Copyright (c) 2010 Broadcom Corporation
3  * Copyright (c) 2013 Hauke Mehrtens <hauke@hauke-m.de>
4  *
5  * Permission to use, copy, modify, and/or distribute this software for any
6  * purpose with or without fee is hereby granted, provided that the above
7  * copyright notice and this permission notice appear in all copies.
8  *
9  * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
10  * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
11  * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY
12  * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
13  * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION
14  * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN
15  * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
16  */
17 
18 #define __UNDEF_NO_VERSION__
19 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
20 
21 #include <linux/etherdevice.h>
22 #include <linux/sched.h>
23 #include <linux/firmware.h>
24 #include <linux/interrupt.h>
25 #include <linux/module.h>
26 #include <linux/bcma/bcma.h>
27 #include <net/mac80211.h>
28 #include <defs.h>
29 #include "phy/phy_int.h"
30 #include "d11.h"
31 #include "channel.h"
32 #include "scb.h"
33 #include "pub.h"
34 #include "ucode_loader.h"
35 #include "mac80211_if.h"
36 #include "main.h"
37 #include "debug.h"
38 #include "led.h"
39 
40 #define N_TX_QUEUES	4 /* #tx queues on mac80211<->driver interface */
41 #define BRCMS_FLUSH_TIMEOUT	500 /* msec */
42 
43 /* Flags we support */
44 #define MAC_FILTERS (FIF_ALLMULTI | \
45 	FIF_FCSFAIL | \
46 	FIF_CONTROL | \
47 	FIF_OTHER_BSS | \
48 	FIF_BCN_PRBRESP_PROMISC | \
49 	FIF_PSPOLL)
50 
51 #define CHAN2GHZ(channel, freqency, chflags)  { \
52 	.band = NL80211_BAND_2GHZ, \
53 	.center_freq = (freqency), \
54 	.hw_value = (channel), \
55 	.flags = chflags, \
56 	.max_antenna_gain = 0, \
57 	.max_power = 19, \
58 }
59 
60 #define CHAN5GHZ(channel, chflags)  { \
61 	.band = NL80211_BAND_5GHZ, \
62 	.center_freq = 5000 + 5*(channel), \
63 	.hw_value = (channel), \
64 	.flags = chflags, \
65 	.max_antenna_gain = 0, \
66 	.max_power = 21, \
67 }
68 
69 #define RATE(rate100m, _flags) { \
70 	.bitrate = (rate100m), \
71 	.flags = (_flags), \
72 	.hw_value = (rate100m / 5), \
73 }
74 
75 struct firmware_hdr {
76 	__le32 offset;
77 	__le32 len;
78 	__le32 idx;
79 };
80 
81 static const char * const brcms_firmwares[MAX_FW_IMAGES] = {
82 	"brcm/bcm43xx",
83 	NULL
84 };
85 
86 static int n_adapters_found;
87 
88 MODULE_AUTHOR("Broadcom Corporation");
89 MODULE_DESCRIPTION("Broadcom 802.11n wireless LAN driver.");
90 MODULE_SUPPORTED_DEVICE("Broadcom 802.11n WLAN cards");
91 MODULE_LICENSE("Dual BSD/GPL");
92 /* This needs to be adjusted when brcms_firmwares changes */
93 MODULE_FIRMWARE("brcm/bcm43xx-0.fw");
94 MODULE_FIRMWARE("brcm/bcm43xx_hdr-0.fw");
95 
96 /* recognized BCMA Core IDs */
97 static struct bcma_device_id brcms_coreid_table[] = {
98 	BCMA_CORE(BCMA_MANUF_BCM, BCMA_CORE_80211, 17, BCMA_ANY_CLASS),
99 	BCMA_CORE(BCMA_MANUF_BCM, BCMA_CORE_80211, 23, BCMA_ANY_CLASS),
100 	BCMA_CORE(BCMA_MANUF_BCM, BCMA_CORE_80211, 24, BCMA_ANY_CLASS),
101 	{},
102 };
103 MODULE_DEVICE_TABLE(bcma, brcms_coreid_table);
104 
105 #if defined(CONFIG_BRCMDBG)
106 /*
107  * Module parameter for setting the debug message level. Available
108  * flags are specified by the BRCM_DL_* macros in
109  * drivers/net/wireless/brcm80211/include/defs.h.
110  */
111 module_param_named(debug, brcm_msg_level, uint, 0644);
112 #endif
113 
114 static struct ieee80211_channel brcms_2ghz_chantable[] = {
115 	CHAN2GHZ(1, 2412, IEEE80211_CHAN_NO_HT40MINUS),
116 	CHAN2GHZ(2, 2417, IEEE80211_CHAN_NO_HT40MINUS),
117 	CHAN2GHZ(3, 2422, IEEE80211_CHAN_NO_HT40MINUS),
118 	CHAN2GHZ(4, 2427, IEEE80211_CHAN_NO_HT40MINUS),
119 	CHAN2GHZ(5, 2432, 0),
120 	CHAN2GHZ(6, 2437, 0),
121 	CHAN2GHZ(7, 2442, 0),
122 	CHAN2GHZ(8, 2447, IEEE80211_CHAN_NO_HT40PLUS),
123 	CHAN2GHZ(9, 2452, IEEE80211_CHAN_NO_HT40PLUS),
124 	CHAN2GHZ(10, 2457, IEEE80211_CHAN_NO_HT40PLUS),
125 	CHAN2GHZ(11, 2462, IEEE80211_CHAN_NO_HT40PLUS),
126 	CHAN2GHZ(12, 2467,
127 		 IEEE80211_CHAN_NO_IR |
128 		 IEEE80211_CHAN_NO_HT40PLUS),
129 	CHAN2GHZ(13, 2472,
130 		 IEEE80211_CHAN_NO_IR |
131 		 IEEE80211_CHAN_NO_HT40PLUS),
132 	CHAN2GHZ(14, 2484,
133 		 IEEE80211_CHAN_NO_IR |
134 		 IEEE80211_CHAN_NO_HT40PLUS | IEEE80211_CHAN_NO_HT40MINUS |
135 		 IEEE80211_CHAN_NO_OFDM)
136 };
137 
138 static struct ieee80211_channel brcms_5ghz_nphy_chantable[] = {
139 	/* UNII-1 */
140 	CHAN5GHZ(36, IEEE80211_CHAN_NO_HT40MINUS),
141 	CHAN5GHZ(40, IEEE80211_CHAN_NO_HT40PLUS),
142 	CHAN5GHZ(44, IEEE80211_CHAN_NO_HT40MINUS),
143 	CHAN5GHZ(48, IEEE80211_CHAN_NO_HT40PLUS),
144 	/* UNII-2 */
145 	CHAN5GHZ(52,
146 		 IEEE80211_CHAN_RADAR |
147 		 IEEE80211_CHAN_NO_IR | IEEE80211_CHAN_NO_HT40MINUS),
148 	CHAN5GHZ(56,
149 		 IEEE80211_CHAN_RADAR |
150 		 IEEE80211_CHAN_NO_IR | IEEE80211_CHAN_NO_HT40PLUS),
151 	CHAN5GHZ(60,
152 		 IEEE80211_CHAN_RADAR |
153 		 IEEE80211_CHAN_NO_IR | IEEE80211_CHAN_NO_HT40MINUS),
154 	CHAN5GHZ(64,
155 		 IEEE80211_CHAN_RADAR |
156 		 IEEE80211_CHAN_NO_IR | IEEE80211_CHAN_NO_HT40PLUS),
157 	/* MID */
158 	CHAN5GHZ(100,
159 		 IEEE80211_CHAN_RADAR |
160 		 IEEE80211_CHAN_NO_IR | IEEE80211_CHAN_NO_HT40MINUS),
161 	CHAN5GHZ(104,
162 		 IEEE80211_CHAN_RADAR |
163 		 IEEE80211_CHAN_NO_IR | IEEE80211_CHAN_NO_HT40PLUS),
164 	CHAN5GHZ(108,
165 		 IEEE80211_CHAN_RADAR |
166 		 IEEE80211_CHAN_NO_IR | IEEE80211_CHAN_NO_HT40MINUS),
167 	CHAN5GHZ(112,
168 		 IEEE80211_CHAN_RADAR |
169 		 IEEE80211_CHAN_NO_IR | IEEE80211_CHAN_NO_HT40PLUS),
170 	CHAN5GHZ(116,
171 		 IEEE80211_CHAN_RADAR |
172 		 IEEE80211_CHAN_NO_IR | IEEE80211_CHAN_NO_HT40MINUS),
173 	CHAN5GHZ(120,
174 		 IEEE80211_CHAN_RADAR |
175 		 IEEE80211_CHAN_NO_IR | IEEE80211_CHAN_NO_HT40PLUS),
176 	CHAN5GHZ(124,
177 		 IEEE80211_CHAN_RADAR |
178 		 IEEE80211_CHAN_NO_IR | IEEE80211_CHAN_NO_HT40MINUS),
179 	CHAN5GHZ(128,
180 		 IEEE80211_CHAN_RADAR |
181 		 IEEE80211_CHAN_NO_IR | IEEE80211_CHAN_NO_HT40PLUS),
182 	CHAN5GHZ(132,
183 		 IEEE80211_CHAN_RADAR |
184 		 IEEE80211_CHAN_NO_IR | IEEE80211_CHAN_NO_HT40MINUS),
185 	CHAN5GHZ(136,
186 		 IEEE80211_CHAN_RADAR |
187 		 IEEE80211_CHAN_NO_IR | IEEE80211_CHAN_NO_HT40PLUS),
188 	CHAN5GHZ(140,
189 		 IEEE80211_CHAN_RADAR |
190 		 IEEE80211_CHAN_NO_IR | IEEE80211_CHAN_NO_HT40PLUS |
191 		 IEEE80211_CHAN_NO_HT40MINUS),
192 	/* UNII-3 */
193 	CHAN5GHZ(149, IEEE80211_CHAN_NO_HT40MINUS),
194 	CHAN5GHZ(153, IEEE80211_CHAN_NO_HT40PLUS),
195 	CHAN5GHZ(157, IEEE80211_CHAN_NO_HT40MINUS),
196 	CHAN5GHZ(161, IEEE80211_CHAN_NO_HT40PLUS),
197 	CHAN5GHZ(165, IEEE80211_CHAN_NO_HT40PLUS | IEEE80211_CHAN_NO_HT40MINUS)
198 };
199 
200 /*
201  * The rate table is used for both 2.4G and 5G rates. The
202  * latter being a subset as it does not support CCK rates.
203  */
204 static struct ieee80211_rate legacy_ratetable[] = {
205 	RATE(10, 0),
206 	RATE(20, IEEE80211_RATE_SHORT_PREAMBLE),
207 	RATE(55, IEEE80211_RATE_SHORT_PREAMBLE),
208 	RATE(110, IEEE80211_RATE_SHORT_PREAMBLE),
209 	RATE(60, 0),
210 	RATE(90, 0),
211 	RATE(120, 0),
212 	RATE(180, 0),
213 	RATE(240, 0),
214 	RATE(360, 0),
215 	RATE(480, 0),
216 	RATE(540, 0),
217 };
218 
219 static const struct ieee80211_supported_band brcms_band_2GHz_nphy_template = {
220 	.band = NL80211_BAND_2GHZ,
221 	.channels = brcms_2ghz_chantable,
222 	.n_channels = ARRAY_SIZE(brcms_2ghz_chantable),
223 	.bitrates = legacy_ratetable,
224 	.n_bitrates = ARRAY_SIZE(legacy_ratetable),
225 	.ht_cap = {
226 		   /* from include/linux/ieee80211.h */
227 		   .cap = IEEE80211_HT_CAP_GRN_FLD |
228 			  IEEE80211_HT_CAP_SGI_20 | IEEE80211_HT_CAP_SGI_40,
229 		   .ht_supported = true,
230 		   .ampdu_factor = IEEE80211_HT_MAX_AMPDU_64K,
231 		   .ampdu_density = AMPDU_DEF_MPDU_DENSITY,
232 		   .mcs = {
233 			   /* placeholders for now */
234 			   .rx_mask = {0xff, 0xff, 0, 0, 0, 0, 0, 0, 0, 0},
235 			   .rx_highest = cpu_to_le16(500),
236 			   .tx_params = IEEE80211_HT_MCS_TX_DEFINED}
237 		   }
238 };
239 
240 static const struct ieee80211_supported_band brcms_band_5GHz_nphy_template = {
241 	.band = NL80211_BAND_5GHZ,
242 	.channels = brcms_5ghz_nphy_chantable,
243 	.n_channels = ARRAY_SIZE(brcms_5ghz_nphy_chantable),
244 	.bitrates = legacy_ratetable + BRCMS_LEGACY_5G_RATE_OFFSET,
245 	.n_bitrates = ARRAY_SIZE(legacy_ratetable) -
246 			BRCMS_LEGACY_5G_RATE_OFFSET,
247 	.ht_cap = {
248 		   .cap = IEEE80211_HT_CAP_GRN_FLD | IEEE80211_HT_CAP_SGI_20 |
249 			  IEEE80211_HT_CAP_SGI_40,
250 		   .ht_supported = true,
251 		   .ampdu_factor = IEEE80211_HT_MAX_AMPDU_64K,
252 		   .ampdu_density = AMPDU_DEF_MPDU_DENSITY,
253 		   .mcs = {
254 			   /* placeholders for now */
255 			   .rx_mask = {0xff, 0xff, 0, 0, 0, 0, 0, 0, 0, 0},
256 			   .rx_highest = cpu_to_le16(500),
257 			   .tx_params = IEEE80211_HT_MCS_TX_DEFINED}
258 		   }
259 };
260 
261 /* flags the given rate in rateset as requested */
262 static void brcms_set_basic_rate(struct brcm_rateset *rs, u16 rate, bool is_br)
263 {
264 	u32 i;
265 
266 	for (i = 0; i < rs->count; i++) {
267 		if (rate != (rs->rates[i] & 0x7f))
268 			continue;
269 
270 		if (is_br)
271 			rs->rates[i] |= BRCMS_RATE_FLAG;
272 		else
273 			rs->rates[i] &= BRCMS_RATE_MASK;
274 		return;
275 	}
276 }
277 
278 /**
279  * This function frees the WL per-device resources.
280  *
281  * This function frees resources owned by the WL device pointed to
282  * by the wl parameter.
283  *
284  * precondition: can both be called locked and unlocked
285  *
286  */
287 static void brcms_free(struct brcms_info *wl)
288 {
289 	struct brcms_timer *t, *next;
290 
291 	/* free ucode data */
292 	if (wl->fw.fw_cnt)
293 		brcms_ucode_data_free(&wl->ucode);
294 	if (wl->irq)
295 		free_irq(wl->irq, wl);
296 
297 	/* kill dpc */
298 	tasklet_kill(&wl->tasklet);
299 
300 	if (wl->pub) {
301 		brcms_debugfs_detach(wl->pub);
302 		brcms_c_module_unregister(wl->pub, "linux", wl);
303 	}
304 
305 	/* free common resources */
306 	if (wl->wlc) {
307 		brcms_c_detach(wl->wlc);
308 		wl->wlc = NULL;
309 		wl->pub = NULL;
310 	}
311 
312 	/* virtual interface deletion is deferred so we cannot spinwait */
313 
314 	/* wait for all pending callbacks to complete */
315 	while (atomic_read(&wl->callbacks) > 0)
316 		schedule();
317 
318 	/* free timers */
319 	for (t = wl->timers; t; t = next) {
320 		next = t->next;
321 #ifdef DEBUG
322 		kfree(t->name);
323 #endif
324 		kfree(t);
325 	}
326 }
327 
328 /*
329 * called from both kernel as from this kernel module (error flow on attach)
330 * precondition: perimeter lock is not acquired.
331 */
332 static void brcms_remove(struct bcma_device *pdev)
333 {
334 	struct ieee80211_hw *hw = bcma_get_drvdata(pdev);
335 	struct brcms_info *wl = hw->priv;
336 
337 	if (wl->wlc) {
338 		brcms_led_unregister(wl);
339 		wiphy_rfkill_set_hw_state(wl->pub->ieee_hw->wiphy, false);
340 		wiphy_rfkill_stop_polling(wl->pub->ieee_hw->wiphy);
341 		ieee80211_unregister_hw(hw);
342 	}
343 
344 	brcms_free(wl);
345 
346 	bcma_set_drvdata(pdev, NULL);
347 	ieee80211_free_hw(hw);
348 }
349 
350 /*
351  * Precondition: Since this function is called in brcms_pci_probe() context,
352  * no locking is required.
353  */
354 static void brcms_release_fw(struct brcms_info *wl)
355 {
356 	int i;
357 	for (i = 0; i < MAX_FW_IMAGES; i++) {
358 		release_firmware(wl->fw.fw_bin[i]);
359 		release_firmware(wl->fw.fw_hdr[i]);
360 	}
361 }
362 
363 /*
364  * Precondition: Since this function is called in brcms_pci_probe() context,
365  * no locking is required.
366  */
367 static int brcms_request_fw(struct brcms_info *wl, struct bcma_device *pdev)
368 {
369 	int status;
370 	struct device *device = &pdev->dev;
371 	char fw_name[100];
372 	int i;
373 
374 	memset(&wl->fw, 0, sizeof(struct brcms_firmware));
375 	for (i = 0; i < MAX_FW_IMAGES; i++) {
376 		if (brcms_firmwares[i] == NULL)
377 			break;
378 		sprintf(fw_name, "%s-%d.fw", brcms_firmwares[i],
379 			UCODE_LOADER_API_VER);
380 		status = request_firmware(&wl->fw.fw_bin[i], fw_name, device);
381 		if (status) {
382 			wiphy_err(wl->wiphy, "%s: fail to load firmware %s\n",
383 				  KBUILD_MODNAME, fw_name);
384 			return status;
385 		}
386 		sprintf(fw_name, "%s_hdr-%d.fw", brcms_firmwares[i],
387 			UCODE_LOADER_API_VER);
388 		status = request_firmware(&wl->fw.fw_hdr[i], fw_name, device);
389 		if (status) {
390 			wiphy_err(wl->wiphy, "%s: fail to load firmware %s\n",
391 				  KBUILD_MODNAME, fw_name);
392 			return status;
393 		}
394 		wl->fw.hdr_num_entries[i] =
395 		    wl->fw.fw_hdr[i]->size / (sizeof(struct firmware_hdr));
396 	}
397 	wl->fw.fw_cnt = i;
398 	status = brcms_ucode_data_init(wl, &wl->ucode);
399 	brcms_release_fw(wl);
400 	return status;
401 }
402 
403 static void brcms_ops_tx(struct ieee80211_hw *hw,
404 			 struct ieee80211_tx_control *control,
405 			 struct sk_buff *skb)
406 {
407 	struct brcms_info *wl = hw->priv;
408 	struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(skb);
409 
410 	spin_lock_bh(&wl->lock);
411 	if (!wl->pub->up) {
412 		brcms_err(wl->wlc->hw->d11core, "ops->tx called while down\n");
413 		kfree_skb(skb);
414 		goto done;
415 	}
416 	if (brcms_c_sendpkt_mac80211(wl->wlc, skb, hw))
417 		tx_info->rate_driver_data[0] = control->sta;
418  done:
419 	spin_unlock_bh(&wl->lock);
420 }
421 
422 static int brcms_ops_start(struct ieee80211_hw *hw)
423 {
424 	struct brcms_info *wl = hw->priv;
425 	bool blocked;
426 	int err;
427 
428 	if (!wl->ucode.bcm43xx_bomminor) {
429 		err = brcms_request_fw(wl, wl->wlc->hw->d11core);
430 		if (err)
431 			return -ENOENT;
432 	}
433 
434 	ieee80211_wake_queues(hw);
435 	spin_lock_bh(&wl->lock);
436 	blocked = brcms_rfkill_set_hw_state(wl);
437 	spin_unlock_bh(&wl->lock);
438 	if (!blocked)
439 		wiphy_rfkill_stop_polling(wl->pub->ieee_hw->wiphy);
440 
441 	spin_lock_bh(&wl->lock);
442 	/* avoid acknowledging frames before a non-monitor device is added */
443 	wl->mute_tx = true;
444 
445 	if (!wl->pub->up)
446 		if (!blocked)
447 			err = brcms_up(wl);
448 		else
449 			err = -ERFKILL;
450 	else
451 		err = -ENODEV;
452 	spin_unlock_bh(&wl->lock);
453 
454 	if (err != 0)
455 		brcms_err(wl->wlc->hw->d11core, "%s: brcms_up() returned %d\n",
456 			  __func__, err);
457 
458 	bcma_core_pci_power_save(wl->wlc->hw->d11core->bus, true);
459 	return err;
460 }
461 
462 static void brcms_ops_stop(struct ieee80211_hw *hw)
463 {
464 	struct brcms_info *wl = hw->priv;
465 	int status;
466 
467 	ieee80211_stop_queues(hw);
468 
469 	if (wl->wlc == NULL)
470 		return;
471 
472 	spin_lock_bh(&wl->lock);
473 	status = brcms_c_chipmatch(wl->wlc->hw->d11core);
474 	spin_unlock_bh(&wl->lock);
475 	if (!status) {
476 		brcms_err(wl->wlc->hw->d11core,
477 			  "wl: brcms_ops_stop: chipmatch failed\n");
478 		return;
479 	}
480 
481 	bcma_core_pci_power_save(wl->wlc->hw->d11core->bus, false);
482 
483 	/* put driver in down state */
484 	spin_lock_bh(&wl->lock);
485 	brcms_down(wl);
486 	spin_unlock_bh(&wl->lock);
487 }
488 
489 static int
490 brcms_ops_add_interface(struct ieee80211_hw *hw, struct ieee80211_vif *vif)
491 {
492 	struct brcms_info *wl = hw->priv;
493 
494 	/* Just STA, AP and ADHOC for now */
495 	if (vif->type != NL80211_IFTYPE_STATION &&
496 	    vif->type != NL80211_IFTYPE_AP &&
497 	    vif->type != NL80211_IFTYPE_ADHOC) {
498 		brcms_err(wl->wlc->hw->d11core,
499 			  "%s: Attempt to add type %d, only STA, AP and AdHoc for now\n",
500 			  __func__, vif->type);
501 		return -EOPNOTSUPP;
502 	}
503 
504 	spin_lock_bh(&wl->lock);
505 	wl->mute_tx = false;
506 	brcms_c_mute(wl->wlc, false);
507 	if (vif->type == NL80211_IFTYPE_STATION)
508 		brcms_c_start_station(wl->wlc, vif->addr);
509 	else if (vif->type == NL80211_IFTYPE_AP)
510 		brcms_c_start_ap(wl->wlc, vif->addr, vif->bss_conf.bssid,
511 				 vif->bss_conf.ssid, vif->bss_conf.ssid_len);
512 	else if (vif->type == NL80211_IFTYPE_ADHOC)
513 		brcms_c_start_adhoc(wl->wlc, vif->addr);
514 	spin_unlock_bh(&wl->lock);
515 
516 	return 0;
517 }
518 
519 static void
520 brcms_ops_remove_interface(struct ieee80211_hw *hw, struct ieee80211_vif *vif)
521 {
522 }
523 
524 static int brcms_ops_config(struct ieee80211_hw *hw, u32 changed)
525 {
526 	struct ieee80211_conf *conf = &hw->conf;
527 	struct brcms_info *wl = hw->priv;
528 	struct bcma_device *core = wl->wlc->hw->d11core;
529 	int err = 0;
530 	int new_int;
531 
532 	spin_lock_bh(&wl->lock);
533 	if (changed & IEEE80211_CONF_CHANGE_LISTEN_INTERVAL) {
534 		brcms_c_set_beacon_listen_interval(wl->wlc,
535 						   conf->listen_interval);
536 	}
537 	if (changed & IEEE80211_CONF_CHANGE_MONITOR)
538 		brcms_dbg_info(core, "%s: change monitor mode: %s\n",
539 			       __func__, conf->flags & IEEE80211_CONF_MONITOR ?
540 			       "true" : "false");
541 	if (changed & IEEE80211_CONF_CHANGE_PS)
542 		brcms_err(core, "%s: change power-save mode: %s (implement)\n",
543 			  __func__, conf->flags & IEEE80211_CONF_PS ?
544 			  "true" : "false");
545 
546 	if (changed & IEEE80211_CONF_CHANGE_POWER) {
547 		err = brcms_c_set_tx_power(wl->wlc, conf->power_level);
548 		if (err < 0) {
549 			brcms_err(core, "%s: Error setting power_level\n",
550 				  __func__);
551 			goto config_out;
552 		}
553 		new_int = brcms_c_get_tx_power(wl->wlc);
554 		if (new_int != conf->power_level)
555 			brcms_err(core,
556 				  "%s: Power level req != actual, %d %d\n",
557 				  __func__, conf->power_level,
558 				  new_int);
559 	}
560 	if (changed & IEEE80211_CONF_CHANGE_CHANNEL) {
561 		if (conf->chandef.width == NL80211_CHAN_WIDTH_20 ||
562 		    conf->chandef.width == NL80211_CHAN_WIDTH_20_NOHT)
563 			err = brcms_c_set_channel(wl->wlc,
564 						  conf->chandef.chan->hw_value);
565 		else
566 			err = -ENOTSUPP;
567 	}
568 	if (changed & IEEE80211_CONF_CHANGE_RETRY_LIMITS)
569 		err = brcms_c_set_rate_limit(wl->wlc,
570 					     conf->short_frame_max_tx_count,
571 					     conf->long_frame_max_tx_count);
572 
573  config_out:
574 	spin_unlock_bh(&wl->lock);
575 	return err;
576 }
577 
578 static void
579 brcms_ops_bss_info_changed(struct ieee80211_hw *hw,
580 			struct ieee80211_vif *vif,
581 			struct ieee80211_bss_conf *info, u32 changed)
582 {
583 	struct brcms_info *wl = hw->priv;
584 	struct bcma_device *core = wl->wlc->hw->d11core;
585 
586 	if (changed & BSS_CHANGED_ASSOC) {
587 		/* association status changed (associated/disassociated)
588 		 * also implies a change in the AID.
589 		 */
590 		brcms_err(core, "%s: %s: %sassociated\n", KBUILD_MODNAME,
591 			  __func__, info->assoc ? "" : "dis");
592 		spin_lock_bh(&wl->lock);
593 		brcms_c_associate_upd(wl->wlc, info->assoc);
594 		spin_unlock_bh(&wl->lock);
595 	}
596 	if (changed & BSS_CHANGED_ERP_SLOT) {
597 		s8 val;
598 
599 		/* slot timing changed */
600 		if (info->use_short_slot)
601 			val = 1;
602 		else
603 			val = 0;
604 		spin_lock_bh(&wl->lock);
605 		brcms_c_set_shortslot_override(wl->wlc, val);
606 		spin_unlock_bh(&wl->lock);
607 	}
608 
609 	if (changed & BSS_CHANGED_HT) {
610 		/* 802.11n parameters changed */
611 		u16 mode = info->ht_operation_mode;
612 
613 		spin_lock_bh(&wl->lock);
614 		brcms_c_protection_upd(wl->wlc, BRCMS_PROT_N_CFG,
615 			mode & IEEE80211_HT_OP_MODE_PROTECTION);
616 		brcms_c_protection_upd(wl->wlc, BRCMS_PROT_N_NONGF,
617 			mode & IEEE80211_HT_OP_MODE_NON_GF_STA_PRSNT);
618 		brcms_c_protection_upd(wl->wlc, BRCMS_PROT_N_OBSS,
619 			mode & IEEE80211_HT_OP_MODE_NON_HT_STA_PRSNT);
620 		spin_unlock_bh(&wl->lock);
621 	}
622 	if (changed & BSS_CHANGED_BASIC_RATES) {
623 		struct ieee80211_supported_band *bi;
624 		u32 br_mask, i;
625 		u16 rate;
626 		struct brcm_rateset rs;
627 		int error;
628 
629 		/* retrieve the current rates */
630 		spin_lock_bh(&wl->lock);
631 		brcms_c_get_current_rateset(wl->wlc, &rs);
632 		spin_unlock_bh(&wl->lock);
633 
634 		br_mask = info->basic_rates;
635 		bi = hw->wiphy->bands[brcms_c_get_curband(wl->wlc)];
636 		for (i = 0; i < bi->n_bitrates; i++) {
637 			/* convert to internal rate value */
638 			rate = (bi->bitrates[i].bitrate << 1) / 10;
639 
640 			/* set/clear basic rate flag */
641 			brcms_set_basic_rate(&rs, rate, br_mask & 1);
642 			br_mask >>= 1;
643 		}
644 
645 		/* update the rate set */
646 		spin_lock_bh(&wl->lock);
647 		error = brcms_c_set_rateset(wl->wlc, &rs);
648 		spin_unlock_bh(&wl->lock);
649 		if (error)
650 			brcms_err(core, "changing basic rates failed: %d\n",
651 				  error);
652 	}
653 	if (changed & BSS_CHANGED_BEACON_INT) {
654 		/* Beacon interval changed */
655 		spin_lock_bh(&wl->lock);
656 		brcms_c_set_beacon_period(wl->wlc, info->beacon_int);
657 		spin_unlock_bh(&wl->lock);
658 	}
659 	if (changed & BSS_CHANGED_BSSID) {
660 		/* BSSID changed, for whatever reason (IBSS and managed mode) */
661 		spin_lock_bh(&wl->lock);
662 		brcms_c_set_addrmatch(wl->wlc, RCM_BSSID_OFFSET, info->bssid);
663 		spin_unlock_bh(&wl->lock);
664 	}
665 	if (changed & BSS_CHANGED_SSID) {
666 		/* BSSID changed, for whatever reason (IBSS and managed mode) */
667 		spin_lock_bh(&wl->lock);
668 		brcms_c_set_ssid(wl->wlc, info->ssid, info->ssid_len);
669 		spin_unlock_bh(&wl->lock);
670 	}
671 	if (changed & BSS_CHANGED_BEACON) {
672 		/* Beacon data changed, retrieve new beacon (beaconing modes) */
673 		struct sk_buff *beacon;
674 		u16 tim_offset = 0;
675 
676 		spin_lock_bh(&wl->lock);
677 		beacon = ieee80211_beacon_get_tim(hw, vif, &tim_offset, NULL);
678 		brcms_c_set_new_beacon(wl->wlc, beacon, tim_offset,
679 				       info->dtim_period);
680 		spin_unlock_bh(&wl->lock);
681 	}
682 
683 	if (changed & BSS_CHANGED_AP_PROBE_RESP) {
684 		struct sk_buff *probe_resp;
685 
686 		spin_lock_bh(&wl->lock);
687 		probe_resp = ieee80211_proberesp_get(hw, vif);
688 		brcms_c_set_new_probe_resp(wl->wlc, probe_resp);
689 		spin_unlock_bh(&wl->lock);
690 	}
691 
692 	if (changed & BSS_CHANGED_BEACON_ENABLED) {
693 		/* Beaconing should be enabled/disabled (beaconing modes) */
694 		brcms_err(core, "%s: Beacon enabled: %s\n", __func__,
695 			  info->enable_beacon ? "true" : "false");
696 		if (info->enable_beacon &&
697 		    hw->wiphy->flags & WIPHY_FLAG_AP_PROBE_RESP_OFFLOAD) {
698 			brcms_c_enable_probe_resp(wl->wlc, true);
699 		} else {
700 			brcms_c_enable_probe_resp(wl->wlc, false);
701 		}
702 	}
703 
704 	if (changed & BSS_CHANGED_CQM) {
705 		/* Connection quality monitor config changed */
706 		brcms_err(core, "%s: cqm change: threshold %d, hys %d "
707 			  " (implement)\n", __func__, info->cqm_rssi_thold,
708 			  info->cqm_rssi_hyst);
709 	}
710 
711 	if (changed & BSS_CHANGED_IBSS) {
712 		/* IBSS join status changed */
713 		brcms_err(core, "%s: IBSS joined: %s (implement)\n",
714 			  __func__, info->ibss_joined ? "true" : "false");
715 	}
716 
717 	if (changed & BSS_CHANGED_ARP_FILTER) {
718 		/* Hardware ARP filter address list or state changed */
719 		brcms_err(core, "%s: arp filtering: %d addresses"
720 			  " (implement)\n", __func__, info->arp_addr_cnt);
721 	}
722 
723 	if (changed & BSS_CHANGED_QOS) {
724 		/*
725 		 * QoS for this association was enabled/disabled.
726 		 * Note that it is only ever disabled for station mode.
727 		 */
728 		brcms_err(core, "%s: qos enabled: %s (implement)\n",
729 			  __func__, info->qos ? "true" : "false");
730 	}
731 	return;
732 }
733 
734 static void
735 brcms_ops_configure_filter(struct ieee80211_hw *hw,
736 			unsigned int changed_flags,
737 			unsigned int *total_flags, u64 multicast)
738 {
739 	struct brcms_info *wl = hw->priv;
740 	struct bcma_device *core = wl->wlc->hw->d11core;
741 
742 	changed_flags &= MAC_FILTERS;
743 	*total_flags &= MAC_FILTERS;
744 
745 	if (changed_flags & FIF_ALLMULTI)
746 		brcms_dbg_info(core, "FIF_ALLMULTI\n");
747 	if (changed_flags & FIF_FCSFAIL)
748 		brcms_dbg_info(core, "FIF_FCSFAIL\n");
749 	if (changed_flags & FIF_CONTROL)
750 		brcms_dbg_info(core, "FIF_CONTROL\n");
751 	if (changed_flags & FIF_OTHER_BSS)
752 		brcms_dbg_info(core, "FIF_OTHER_BSS\n");
753 	if (changed_flags & FIF_PSPOLL)
754 		brcms_dbg_info(core, "FIF_PSPOLL\n");
755 	if (changed_flags & FIF_BCN_PRBRESP_PROMISC)
756 		brcms_dbg_info(core, "FIF_BCN_PRBRESP_PROMISC\n");
757 
758 	spin_lock_bh(&wl->lock);
759 	brcms_c_mac_promisc(wl->wlc, *total_flags);
760 	spin_unlock_bh(&wl->lock);
761 	return;
762 }
763 
764 static void brcms_ops_sw_scan_start(struct ieee80211_hw *hw,
765 				    struct ieee80211_vif *vif,
766 				    const u8 *mac_addr)
767 {
768 	struct brcms_info *wl = hw->priv;
769 	spin_lock_bh(&wl->lock);
770 	brcms_c_scan_start(wl->wlc);
771 	spin_unlock_bh(&wl->lock);
772 	return;
773 }
774 
775 static void brcms_ops_sw_scan_complete(struct ieee80211_hw *hw,
776 				       struct ieee80211_vif *vif)
777 {
778 	struct brcms_info *wl = hw->priv;
779 	spin_lock_bh(&wl->lock);
780 	brcms_c_scan_stop(wl->wlc);
781 	spin_unlock_bh(&wl->lock);
782 	return;
783 }
784 
785 static int
786 brcms_ops_conf_tx(struct ieee80211_hw *hw, struct ieee80211_vif *vif, u16 queue,
787 		  const struct ieee80211_tx_queue_params *params)
788 {
789 	struct brcms_info *wl = hw->priv;
790 
791 	spin_lock_bh(&wl->lock);
792 	brcms_c_wme_setparams(wl->wlc, queue, params, true);
793 	spin_unlock_bh(&wl->lock);
794 
795 	return 0;
796 }
797 
798 static int
799 brcms_ops_sta_add(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
800 	       struct ieee80211_sta *sta)
801 {
802 	struct brcms_info *wl = hw->priv;
803 	struct scb *scb = &wl->wlc->pri_scb;
804 
805 	brcms_c_init_scb(scb);
806 
807 	wl->pub->global_ampdu = &(scb->scb_ampdu);
808 	wl->pub->global_ampdu->scb = scb;
809 	wl->pub->global_ampdu->max_pdu = 16;
810 
811 	/*
812 	 * minstrel_ht initiates addBA on our behalf by calling
813 	 * ieee80211_start_tx_ba_session()
814 	 */
815 	return 0;
816 }
817 
818 static int
819 brcms_ops_ampdu_action(struct ieee80211_hw *hw,
820 		    struct ieee80211_vif *vif,
821 		    struct ieee80211_ampdu_params *params)
822 {
823 	struct brcms_info *wl = hw->priv;
824 	struct scb *scb = &wl->wlc->pri_scb;
825 	int status;
826 	struct ieee80211_sta *sta = params->sta;
827 	enum ieee80211_ampdu_mlme_action action = params->action;
828 	u16 tid = params->tid;
829 	u8 buf_size = params->buf_size;
830 
831 	if (WARN_ON(scb->magic != SCB_MAGIC))
832 		return -EIDRM;
833 	switch (action) {
834 	case IEEE80211_AMPDU_RX_START:
835 		break;
836 	case IEEE80211_AMPDU_RX_STOP:
837 		break;
838 	case IEEE80211_AMPDU_TX_START:
839 		spin_lock_bh(&wl->lock);
840 		status = brcms_c_aggregatable(wl->wlc, tid);
841 		spin_unlock_bh(&wl->lock);
842 		if (!status) {
843 			brcms_err(wl->wlc->hw->d11core,
844 				  "START: tid %d is not agg\'able\n", tid);
845 			return -EINVAL;
846 		}
847 		ieee80211_start_tx_ba_cb_irqsafe(vif, sta->addr, tid);
848 		break;
849 
850 	case IEEE80211_AMPDU_TX_STOP_CONT:
851 	case IEEE80211_AMPDU_TX_STOP_FLUSH:
852 	case IEEE80211_AMPDU_TX_STOP_FLUSH_CONT:
853 		spin_lock_bh(&wl->lock);
854 		brcms_c_ampdu_flush(wl->wlc, sta, tid);
855 		spin_unlock_bh(&wl->lock);
856 		ieee80211_stop_tx_ba_cb_irqsafe(vif, sta->addr, tid);
857 		break;
858 	case IEEE80211_AMPDU_TX_OPERATIONAL:
859 		/*
860 		 * BA window size from ADDBA response ('buf_size') defines how
861 		 * many outstanding MPDUs are allowed for the BA stream by
862 		 * recipient and traffic class. 'ampdu_factor' gives maximum
863 		 * AMPDU size.
864 		 */
865 		spin_lock_bh(&wl->lock);
866 		brcms_c_ampdu_tx_operational(wl->wlc, tid, buf_size,
867 			(1 << (IEEE80211_HT_MAX_AMPDU_FACTOR +
868 			 sta->ht_cap.ampdu_factor)) - 1);
869 		spin_unlock_bh(&wl->lock);
870 		/* Power save wakeup */
871 		break;
872 	default:
873 		brcms_err(wl->wlc->hw->d11core,
874 			  "%s: Invalid command, ignoring\n", __func__);
875 	}
876 
877 	return 0;
878 }
879 
880 static void brcms_ops_rfkill_poll(struct ieee80211_hw *hw)
881 {
882 	struct brcms_info *wl = hw->priv;
883 	bool blocked;
884 
885 	spin_lock_bh(&wl->lock);
886 	blocked = brcms_c_check_radio_disabled(wl->wlc);
887 	spin_unlock_bh(&wl->lock);
888 
889 	wiphy_rfkill_set_hw_state(wl->pub->ieee_hw->wiphy, blocked);
890 }
891 
892 static bool brcms_tx_flush_completed(struct brcms_info *wl)
893 {
894 	bool result;
895 
896 	spin_lock_bh(&wl->lock);
897 	result = brcms_c_tx_flush_completed(wl->wlc);
898 	spin_unlock_bh(&wl->lock);
899 	return result;
900 }
901 
902 static void brcms_ops_flush(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
903 			    u32 queues, bool drop)
904 {
905 	struct brcms_info *wl = hw->priv;
906 	int ret;
907 
908 	no_printk("%s: drop = %s\n", __func__, drop ? "true" : "false");
909 
910 	ret = wait_event_timeout(wl->tx_flush_wq,
911 				 brcms_tx_flush_completed(wl),
912 				 msecs_to_jiffies(BRCMS_FLUSH_TIMEOUT));
913 
914 	brcms_dbg_mac80211(wl->wlc->hw->d11core,
915 			   "ret=%d\n", jiffies_to_msecs(ret));
916 }
917 
918 static u64 brcms_ops_get_tsf(struct ieee80211_hw *hw, struct ieee80211_vif *vif)
919 {
920 	struct brcms_info *wl = hw->priv;
921 	u64 tsf;
922 
923 	spin_lock_bh(&wl->lock);
924 	tsf = brcms_c_tsf_get(wl->wlc);
925 	spin_unlock_bh(&wl->lock);
926 
927 	return tsf;
928 }
929 
930 static void brcms_ops_set_tsf(struct ieee80211_hw *hw,
931 			   struct ieee80211_vif *vif, u64 tsf)
932 {
933 	struct brcms_info *wl = hw->priv;
934 
935 	spin_lock_bh(&wl->lock);
936 	brcms_c_tsf_set(wl->wlc, tsf);
937 	spin_unlock_bh(&wl->lock);
938 }
939 
940 static const struct ieee80211_ops brcms_ops = {
941 	.tx = brcms_ops_tx,
942 	.start = brcms_ops_start,
943 	.stop = brcms_ops_stop,
944 	.add_interface = brcms_ops_add_interface,
945 	.remove_interface = brcms_ops_remove_interface,
946 	.config = brcms_ops_config,
947 	.bss_info_changed = brcms_ops_bss_info_changed,
948 	.configure_filter = brcms_ops_configure_filter,
949 	.sw_scan_start = brcms_ops_sw_scan_start,
950 	.sw_scan_complete = brcms_ops_sw_scan_complete,
951 	.conf_tx = brcms_ops_conf_tx,
952 	.sta_add = brcms_ops_sta_add,
953 	.ampdu_action = brcms_ops_ampdu_action,
954 	.rfkill_poll = brcms_ops_rfkill_poll,
955 	.flush = brcms_ops_flush,
956 	.get_tsf = brcms_ops_get_tsf,
957 	.set_tsf = brcms_ops_set_tsf,
958 };
959 
960 void brcms_dpc(unsigned long data)
961 {
962 	struct brcms_info *wl;
963 
964 	wl = (struct brcms_info *) data;
965 
966 	spin_lock_bh(&wl->lock);
967 
968 	/* call the common second level interrupt handler */
969 	if (wl->pub->up) {
970 		if (wl->resched) {
971 			unsigned long flags;
972 
973 			spin_lock_irqsave(&wl->isr_lock, flags);
974 			brcms_c_intrsupd(wl->wlc);
975 			spin_unlock_irqrestore(&wl->isr_lock, flags);
976 		}
977 
978 		wl->resched = brcms_c_dpc(wl->wlc, true);
979 	}
980 
981 	/* brcms_c_dpc() may bring the driver down */
982 	if (!wl->pub->up)
983 		goto done;
984 
985 	/* re-schedule dpc */
986 	if (wl->resched)
987 		tasklet_schedule(&wl->tasklet);
988 	else
989 		/* re-enable interrupts */
990 		brcms_intrson(wl);
991 
992  done:
993 	spin_unlock_bh(&wl->lock);
994 	wake_up(&wl->tx_flush_wq);
995 }
996 
997 static irqreturn_t brcms_isr(int irq, void *dev_id)
998 {
999 	struct brcms_info *wl;
1000 	irqreturn_t ret = IRQ_NONE;
1001 
1002 	wl = (struct brcms_info *) dev_id;
1003 
1004 	spin_lock(&wl->isr_lock);
1005 
1006 	/* call common first level interrupt handler */
1007 	if (brcms_c_isr(wl->wlc)) {
1008 		/* schedule second level handler */
1009 		tasklet_schedule(&wl->tasklet);
1010 		ret = IRQ_HANDLED;
1011 	}
1012 
1013 	spin_unlock(&wl->isr_lock);
1014 
1015 	return ret;
1016 }
1017 
1018 /*
1019  * is called in brcms_pci_probe() context, therefore no locking required.
1020  */
1021 static int ieee_hw_rate_init(struct ieee80211_hw *hw)
1022 {
1023 	struct brcms_info *wl = hw->priv;
1024 	struct brcms_c_info *wlc = wl->wlc;
1025 	struct ieee80211_supported_band *band;
1026 	int has_5g = 0;
1027 	u16 phy_type;
1028 
1029 	hw->wiphy->bands[NL80211_BAND_2GHZ] = NULL;
1030 	hw->wiphy->bands[NL80211_BAND_5GHZ] = NULL;
1031 
1032 	phy_type = brcms_c_get_phy_type(wl->wlc, 0);
1033 	if (phy_type == PHY_TYPE_N || phy_type == PHY_TYPE_LCN) {
1034 		band = &wlc->bandstate[BAND_2G_INDEX]->band;
1035 		*band = brcms_band_2GHz_nphy_template;
1036 		if (phy_type == PHY_TYPE_LCN) {
1037 			/* Single stream */
1038 			band->ht_cap.mcs.rx_mask[1] = 0;
1039 			band->ht_cap.mcs.rx_highest = cpu_to_le16(72);
1040 		}
1041 		hw->wiphy->bands[NL80211_BAND_2GHZ] = band;
1042 	} else {
1043 		return -EPERM;
1044 	}
1045 
1046 	/* Assume all bands use the same phy.  True for 11n devices. */
1047 	if (wl->pub->_nbands > 1) {
1048 		has_5g++;
1049 		if (phy_type == PHY_TYPE_N || phy_type == PHY_TYPE_LCN) {
1050 			band = &wlc->bandstate[BAND_5G_INDEX]->band;
1051 			*band = brcms_band_5GHz_nphy_template;
1052 			hw->wiphy->bands[NL80211_BAND_5GHZ] = band;
1053 		} else {
1054 			return -EPERM;
1055 		}
1056 	}
1057 	return 0;
1058 }
1059 
1060 /*
1061  * is called in brcms_pci_probe() context, therefore no locking required.
1062  */
1063 static int ieee_hw_init(struct ieee80211_hw *hw)
1064 {
1065 	ieee80211_hw_set(hw, AMPDU_AGGREGATION);
1066 	ieee80211_hw_set(hw, SIGNAL_DBM);
1067 	ieee80211_hw_set(hw, REPORTS_TX_ACK_STATUS);
1068 
1069 	hw->extra_tx_headroom = brcms_c_get_header_len();
1070 	hw->queues = N_TX_QUEUES;
1071 	hw->max_rates = 2;	/* Primary rate and 1 fallback rate */
1072 
1073 	/* channel change time is dependent on chip and band  */
1074 	hw->wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION) |
1075 				     BIT(NL80211_IFTYPE_AP) |
1076 				     BIT(NL80211_IFTYPE_ADHOC);
1077 
1078 	/*
1079 	 * deactivate sending probe responses by ucude, because this will
1080 	 * cause problems when WPS is used.
1081 	 *
1082 	 * hw->wiphy->flags |= WIPHY_FLAG_AP_PROBE_RESP_OFFLOAD;
1083 	 */
1084 
1085 	wiphy_ext_feature_set(hw->wiphy, NL80211_EXT_FEATURE_CQM_RSSI_LIST);
1086 
1087 	hw->rate_control_algorithm = "minstrel_ht";
1088 
1089 	hw->sta_data_size = 0;
1090 	return ieee_hw_rate_init(hw);
1091 }
1092 
1093 /**
1094  * attach to the WL device.
1095  *
1096  * Attach to the WL device identified by vendor and device parameters.
1097  * regs is a host accessible memory address pointing to WL device registers.
1098  *
1099  * is called in brcms_bcma_probe() context, therefore no locking required.
1100  */
1101 static struct brcms_info *brcms_attach(struct bcma_device *pdev)
1102 {
1103 	struct brcms_info *wl = NULL;
1104 	int unit, err;
1105 	struct ieee80211_hw *hw;
1106 	u8 perm[ETH_ALEN];
1107 
1108 	unit = n_adapters_found;
1109 	err = 0;
1110 
1111 	if (unit < 0)
1112 		return NULL;
1113 
1114 	/* allocate private info */
1115 	hw = bcma_get_drvdata(pdev);
1116 	if (hw != NULL)
1117 		wl = hw->priv;
1118 	if (WARN_ON(hw == NULL) || WARN_ON(wl == NULL))
1119 		return NULL;
1120 	wl->wiphy = hw->wiphy;
1121 
1122 	atomic_set(&wl->callbacks, 0);
1123 
1124 	init_waitqueue_head(&wl->tx_flush_wq);
1125 
1126 	/* setup the bottom half handler */
1127 	tasklet_init(&wl->tasklet, brcms_dpc, (unsigned long) wl);
1128 
1129 	spin_lock_init(&wl->lock);
1130 	spin_lock_init(&wl->isr_lock);
1131 
1132 	/* common load-time initialization */
1133 	wl->wlc = brcms_c_attach((void *)wl, pdev, unit, false, &err);
1134 	if (!wl->wlc) {
1135 		wiphy_err(wl->wiphy, "%s: attach() failed with code %d\n",
1136 			  KBUILD_MODNAME, err);
1137 		goto fail;
1138 	}
1139 	wl->pub = brcms_c_pub(wl->wlc);
1140 
1141 	wl->pub->ieee_hw = hw;
1142 
1143 	/* register our interrupt handler */
1144 	if (request_irq(pdev->irq, brcms_isr,
1145 			IRQF_SHARED, KBUILD_MODNAME, wl)) {
1146 		wiphy_err(wl->wiphy, "wl%d: request_irq() failed\n", unit);
1147 		goto fail;
1148 	}
1149 	wl->irq = pdev->irq;
1150 
1151 	/* register module */
1152 	brcms_c_module_register(wl->pub, "linux", wl, NULL);
1153 
1154 	if (ieee_hw_init(hw)) {
1155 		wiphy_err(wl->wiphy, "wl%d: %s: ieee_hw_init failed!\n", unit,
1156 			  __func__);
1157 		goto fail;
1158 	}
1159 
1160 	brcms_c_regd_init(wl->wlc);
1161 
1162 	memcpy(perm, &wl->pub->cur_etheraddr, ETH_ALEN);
1163 	if (WARN_ON(!is_valid_ether_addr(perm)))
1164 		goto fail;
1165 	SET_IEEE80211_PERM_ADDR(hw, perm);
1166 
1167 	err = ieee80211_register_hw(hw);
1168 	if (err)
1169 		wiphy_err(wl->wiphy, "%s: ieee80211_register_hw failed, status"
1170 			  "%d\n", __func__, err);
1171 
1172 	if (wl->pub->srom_ccode[0] &&
1173 	    regulatory_hint(wl->wiphy, wl->pub->srom_ccode))
1174 		wiphy_err(wl->wiphy, "%s: regulatory hint failed\n", __func__);
1175 
1176 	brcms_debugfs_attach(wl->pub);
1177 	brcms_debugfs_create_files(wl->pub);
1178 	n_adapters_found++;
1179 	return wl;
1180 
1181 fail:
1182 	brcms_free(wl);
1183 	return NULL;
1184 }
1185 
1186 
1187 
1188 /**
1189  * determines if a device is a WL device, and if so, attaches it.
1190  *
1191  * This function determines if a device pointed to by pdev is a WL device,
1192  * and if so, performs a brcms_attach() on it.
1193  *
1194  * Perimeter lock is initialized in the course of this function.
1195  */
1196 static int brcms_bcma_probe(struct bcma_device *pdev)
1197 {
1198 	struct brcms_info *wl;
1199 	struct ieee80211_hw *hw;
1200 
1201 	dev_info(&pdev->dev, "mfg %x core %x rev %d class %d irq %d\n",
1202 		 pdev->id.manuf, pdev->id.id, pdev->id.rev, pdev->id.class,
1203 		 pdev->irq);
1204 
1205 	if ((pdev->id.manuf != BCMA_MANUF_BCM) ||
1206 	    (pdev->id.id != BCMA_CORE_80211))
1207 		return -ENODEV;
1208 
1209 	hw = ieee80211_alloc_hw(sizeof(struct brcms_info), &brcms_ops);
1210 	if (!hw) {
1211 		pr_err("%s: ieee80211_alloc_hw failed\n", __func__);
1212 		return -ENOMEM;
1213 	}
1214 
1215 	SET_IEEE80211_DEV(hw, &pdev->dev);
1216 
1217 	bcma_set_drvdata(pdev, hw);
1218 
1219 	memset(hw->priv, 0, sizeof(*wl));
1220 
1221 	wl = brcms_attach(pdev);
1222 	if (!wl) {
1223 		pr_err("%s: brcms_attach failed!\n", __func__);
1224 		return -ENODEV;
1225 	}
1226 	brcms_led_register(wl);
1227 
1228 	return 0;
1229 }
1230 
1231 static int brcms_suspend(struct bcma_device *pdev)
1232 {
1233 	struct brcms_info *wl;
1234 	struct ieee80211_hw *hw;
1235 
1236 	hw = bcma_get_drvdata(pdev);
1237 	wl = hw->priv;
1238 	if (!wl) {
1239 		pr_err("%s: %s: no driver private struct!\n", KBUILD_MODNAME,
1240 		       __func__);
1241 		return -ENODEV;
1242 	}
1243 
1244 	/* only need to flag hw is down for proper resume */
1245 	spin_lock_bh(&wl->lock);
1246 	wl->pub->hw_up = false;
1247 	spin_unlock_bh(&wl->lock);
1248 
1249 	brcms_dbg_info(wl->wlc->hw->d11core, "brcms_suspend ok\n");
1250 
1251 	return 0;
1252 }
1253 
1254 static int brcms_resume(struct bcma_device *pdev)
1255 {
1256 	return 0;
1257 }
1258 
1259 static struct bcma_driver brcms_bcma_driver = {
1260 	.name     = KBUILD_MODNAME,
1261 	.probe    = brcms_bcma_probe,
1262 	.suspend  = brcms_suspend,
1263 	.resume   = brcms_resume,
1264 	.remove   = brcms_remove,
1265 	.id_table = brcms_coreid_table,
1266 };
1267 
1268 /**
1269  * This is the main entry point for the brcmsmac driver.
1270  *
1271  * This function is scheduled upon module initialization and
1272  * does the driver registration, which result in brcms_bcma_probe()
1273  * call resulting in the driver bringup.
1274  */
1275 static void brcms_driver_init(struct work_struct *work)
1276 {
1277 	int error;
1278 
1279 	error = bcma_driver_register(&brcms_bcma_driver);
1280 	if (error)
1281 		pr_err("%s: register returned %d\n", __func__, error);
1282 }
1283 
1284 static DECLARE_WORK(brcms_driver_work, brcms_driver_init);
1285 
1286 static int __init brcms_module_init(void)
1287 {
1288 	brcms_debugfs_init();
1289 	if (!schedule_work(&brcms_driver_work))
1290 		return -EBUSY;
1291 
1292 	return 0;
1293 }
1294 
1295 /**
1296  * This function unloads the brcmsmac driver from the system.
1297  *
1298  * This function unconditionally unloads the brcmsmac driver module from the
1299  * system.
1300  *
1301  */
1302 static void __exit brcms_module_exit(void)
1303 {
1304 	cancel_work_sync(&brcms_driver_work);
1305 	bcma_driver_unregister(&brcms_bcma_driver);
1306 	brcms_debugfs_exit();
1307 }
1308 
1309 module_init(brcms_module_init);
1310 module_exit(brcms_module_exit);
1311 
1312 /*
1313  * precondition: perimeter lock has been acquired
1314  */
1315 void brcms_txflowcontrol(struct brcms_info *wl, struct brcms_if *wlif,
1316 			 bool state, int prio)
1317 {
1318 	brcms_err(wl->wlc->hw->d11core, "Shouldn't be here %s\n", __func__);
1319 }
1320 
1321 /*
1322  * precondition: perimeter lock has been acquired
1323  */
1324 void brcms_init(struct brcms_info *wl)
1325 {
1326 	brcms_dbg_info(wl->wlc->hw->d11core, "Initializing wl%d\n",
1327 		       wl->pub->unit);
1328 	brcms_reset(wl);
1329 	brcms_c_init(wl->wlc, wl->mute_tx);
1330 }
1331 
1332 /*
1333  * precondition: perimeter lock has been acquired
1334  */
1335 uint brcms_reset(struct brcms_info *wl)
1336 {
1337 	brcms_dbg_info(wl->wlc->hw->d11core, "Resetting wl%d\n", wl->pub->unit);
1338 	brcms_c_reset(wl->wlc);
1339 
1340 	/* dpc will not be rescheduled */
1341 	wl->resched = false;
1342 
1343 	/* inform publicly that interface is down */
1344 	wl->pub->up = false;
1345 
1346 	return 0;
1347 }
1348 
1349 void brcms_fatal_error(struct brcms_info *wl)
1350 {
1351 	brcms_err(wl->wlc->hw->d11core, "wl%d: fatal error, reinitializing\n",
1352 		  wl->wlc->pub->unit);
1353 	brcms_reset(wl);
1354 	ieee80211_restart_hw(wl->pub->ieee_hw);
1355 }
1356 
1357 /*
1358  * These are interrupt on/off entry points. Disable interrupts
1359  * during interrupt state transition.
1360  */
1361 void brcms_intrson(struct brcms_info *wl)
1362 {
1363 	unsigned long flags;
1364 
1365 	spin_lock_irqsave(&wl->isr_lock, flags);
1366 	brcms_c_intrson(wl->wlc);
1367 	spin_unlock_irqrestore(&wl->isr_lock, flags);
1368 }
1369 
1370 u32 brcms_intrsoff(struct brcms_info *wl)
1371 {
1372 	unsigned long flags;
1373 	u32 status;
1374 
1375 	spin_lock_irqsave(&wl->isr_lock, flags);
1376 	status = brcms_c_intrsoff(wl->wlc);
1377 	spin_unlock_irqrestore(&wl->isr_lock, flags);
1378 	return status;
1379 }
1380 
1381 void brcms_intrsrestore(struct brcms_info *wl, u32 macintmask)
1382 {
1383 	unsigned long flags;
1384 
1385 	spin_lock_irqsave(&wl->isr_lock, flags);
1386 	brcms_c_intrsrestore(wl->wlc, macintmask);
1387 	spin_unlock_irqrestore(&wl->isr_lock, flags);
1388 }
1389 
1390 /*
1391  * precondition: perimeter lock has been acquired
1392  */
1393 int brcms_up(struct brcms_info *wl)
1394 {
1395 	int error = 0;
1396 
1397 	if (wl->pub->up)
1398 		return 0;
1399 
1400 	error = brcms_c_up(wl->wlc);
1401 
1402 	return error;
1403 }
1404 
1405 /*
1406  * precondition: perimeter lock has been acquired
1407  */
1408 void brcms_down(struct brcms_info *wl)
1409 {
1410 	uint callbacks, ret_val = 0;
1411 
1412 	/* call common down function */
1413 	ret_val = brcms_c_down(wl->wlc);
1414 	callbacks = atomic_read(&wl->callbacks) - ret_val;
1415 
1416 	/* wait for down callbacks to complete */
1417 	spin_unlock_bh(&wl->lock);
1418 
1419 	/* For HIGH_only driver, it's important to actually schedule other work,
1420 	 * not just spin wait since everything runs at schedule level
1421 	 */
1422 	SPINWAIT((atomic_read(&wl->callbacks) > callbacks), 100 * 1000);
1423 
1424 	spin_lock_bh(&wl->lock);
1425 }
1426 
1427 /*
1428 * precondition: perimeter lock is not acquired
1429  */
1430 static void _brcms_timer(struct work_struct *work)
1431 {
1432 	struct brcms_timer *t = container_of(work, struct brcms_timer,
1433 					     dly_wrk.work);
1434 
1435 	spin_lock_bh(&t->wl->lock);
1436 
1437 	if (t->set) {
1438 		if (t->periodic) {
1439 			atomic_inc(&t->wl->callbacks);
1440 			ieee80211_queue_delayed_work(t->wl->pub->ieee_hw,
1441 						     &t->dly_wrk,
1442 						     msecs_to_jiffies(t->ms));
1443 		} else {
1444 			t->set = false;
1445 		}
1446 
1447 		t->fn(t->arg);
1448 	}
1449 
1450 	atomic_dec(&t->wl->callbacks);
1451 
1452 	spin_unlock_bh(&t->wl->lock);
1453 }
1454 
1455 /*
1456  * Adds a timer to the list. Caller supplies a timer function.
1457  * Is called from wlc.
1458  *
1459  * precondition: perimeter lock has been acquired
1460  */
1461 struct brcms_timer *brcms_init_timer(struct brcms_info *wl,
1462 				     void (*fn) (void *arg),
1463 				     void *arg, const char *name)
1464 {
1465 	struct brcms_timer *t;
1466 
1467 	t = kzalloc(sizeof(struct brcms_timer), GFP_ATOMIC);
1468 	if (!t)
1469 		return NULL;
1470 
1471 	INIT_DELAYED_WORK(&t->dly_wrk, _brcms_timer);
1472 	t->wl = wl;
1473 	t->fn = fn;
1474 	t->arg = arg;
1475 	t->next = wl->timers;
1476 	wl->timers = t;
1477 
1478 #ifdef DEBUG
1479 	t->name = kstrdup(name, GFP_ATOMIC);
1480 #endif
1481 
1482 	return t;
1483 }
1484 
1485 /*
1486  * adds only the kernel timer since it's going to be more accurate
1487  * as well as it's easier to make it periodic
1488  *
1489  * precondition: perimeter lock has been acquired
1490  */
1491 void brcms_add_timer(struct brcms_timer *t, uint ms, int periodic)
1492 {
1493 	struct ieee80211_hw *hw = t->wl->pub->ieee_hw;
1494 
1495 #ifdef DEBUG
1496 	if (t->set)
1497 		brcms_dbg_info(t->wl->wlc->hw->d11core,
1498 			       "%s: Already set. Name: %s, per %d\n",
1499 			       __func__, t->name, periodic);
1500 #endif
1501 	t->ms = ms;
1502 	t->periodic = (bool) periodic;
1503 	if (!t->set) {
1504 		t->set = true;
1505 		atomic_inc(&t->wl->callbacks);
1506 	}
1507 
1508 	ieee80211_queue_delayed_work(hw, &t->dly_wrk, msecs_to_jiffies(ms));
1509 }
1510 
1511 /*
1512  * return true if timer successfully deleted, false if still pending
1513  *
1514  * precondition: perimeter lock has been acquired
1515  */
1516 bool brcms_del_timer(struct brcms_timer *t)
1517 {
1518 	if (t->set) {
1519 		t->set = false;
1520 		if (!cancel_delayed_work(&t->dly_wrk))
1521 			return false;
1522 
1523 		atomic_dec(&t->wl->callbacks);
1524 	}
1525 
1526 	return true;
1527 }
1528 
1529 /*
1530  * precondition: perimeter lock has been acquired
1531  */
1532 void brcms_free_timer(struct brcms_timer *t)
1533 {
1534 	struct brcms_info *wl = t->wl;
1535 	struct brcms_timer *tmp;
1536 
1537 	/* delete the timer in case it is active */
1538 	brcms_del_timer(t);
1539 
1540 	if (wl->timers == t) {
1541 		wl->timers = wl->timers->next;
1542 #ifdef DEBUG
1543 		kfree(t->name);
1544 #endif
1545 		kfree(t);
1546 		return;
1547 
1548 	}
1549 
1550 	tmp = wl->timers;
1551 	while (tmp) {
1552 		if (tmp->next == t) {
1553 			tmp->next = t->next;
1554 #ifdef DEBUG
1555 			kfree(t->name);
1556 #endif
1557 			kfree(t);
1558 			return;
1559 		}
1560 		tmp = tmp->next;
1561 	}
1562 
1563 }
1564 
1565 /*
1566  * precondition: no locking required
1567  */
1568 int brcms_ucode_init_buf(struct brcms_info *wl, void **pbuf, u32 idx)
1569 {
1570 	int i, entry;
1571 	const u8 *pdata;
1572 	struct firmware_hdr *hdr;
1573 	for (i = 0; i < wl->fw.fw_cnt; i++) {
1574 		hdr = (struct firmware_hdr *)wl->fw.fw_hdr[i]->data;
1575 		for (entry = 0; entry < wl->fw.hdr_num_entries[i];
1576 		     entry++, hdr++) {
1577 			u32 len = le32_to_cpu(hdr->len);
1578 			if (le32_to_cpu(hdr->idx) == idx) {
1579 				pdata = wl->fw.fw_bin[i]->data +
1580 					le32_to_cpu(hdr->offset);
1581 				*pbuf = kmemdup(pdata, len, GFP_KERNEL);
1582 				if (*pbuf == NULL)
1583 					goto fail;
1584 
1585 				return 0;
1586 			}
1587 		}
1588 	}
1589 	brcms_err(wl->wlc->hw->d11core,
1590 		  "ERROR: ucode buf tag:%d can not be found!\n", idx);
1591 	*pbuf = NULL;
1592 fail:
1593 	return -ENODATA;
1594 }
1595 
1596 /*
1597  * Precondition: Since this function is called in brcms_bcma_probe() context,
1598  * no locking is required.
1599  */
1600 int brcms_ucode_init_uint(struct brcms_info *wl, size_t *n_bytes, u32 idx)
1601 {
1602 	int i, entry;
1603 	const u8 *pdata;
1604 	struct firmware_hdr *hdr;
1605 	for (i = 0; i < wl->fw.fw_cnt; i++) {
1606 		hdr = (struct firmware_hdr *)wl->fw.fw_hdr[i]->data;
1607 		for (entry = 0; entry < wl->fw.hdr_num_entries[i];
1608 		     entry++, hdr++) {
1609 			if (le32_to_cpu(hdr->idx) == idx) {
1610 				pdata = wl->fw.fw_bin[i]->data +
1611 					le32_to_cpu(hdr->offset);
1612 				if (le32_to_cpu(hdr->len) != 4) {
1613 					brcms_err(wl->wlc->hw->d11core,
1614 						  "ERROR: fw hdr len\n");
1615 					return -ENOMSG;
1616 				}
1617 				*n_bytes = le32_to_cpu(*((__le32 *) pdata));
1618 				return 0;
1619 			}
1620 		}
1621 	}
1622 	brcms_err(wl->wlc->hw->d11core,
1623 		  "ERROR: ucode tag:%d can not be found!\n", idx);
1624 	return -ENOMSG;
1625 }
1626 
1627 /*
1628  * precondition: can both be called locked and unlocked
1629  */
1630 void brcms_ucode_free_buf(void *p)
1631 {
1632 	kfree(p);
1633 }
1634 
1635 /*
1636  * checks validity of all firmware images loaded from user space
1637  *
1638  * Precondition: Since this function is called in brcms_bcma_probe() context,
1639  * no locking is required.
1640  */
1641 int brcms_check_firmwares(struct brcms_info *wl)
1642 {
1643 	int i;
1644 	int entry;
1645 	int rc = 0;
1646 	const struct firmware *fw;
1647 	const struct firmware *fw_hdr;
1648 	struct firmware_hdr *ucode_hdr;
1649 	for (i = 0; i < MAX_FW_IMAGES && rc == 0; i++) {
1650 		fw =  wl->fw.fw_bin[i];
1651 		fw_hdr = wl->fw.fw_hdr[i];
1652 		if (fw == NULL && fw_hdr == NULL) {
1653 			break;
1654 		} else if (fw == NULL || fw_hdr == NULL) {
1655 			wiphy_err(wl->wiphy, "%s: invalid bin/hdr fw\n",
1656 				  __func__);
1657 			rc = -EBADF;
1658 		} else if (fw_hdr->size % sizeof(struct firmware_hdr)) {
1659 			wiphy_err(wl->wiphy, "%s: non integral fw hdr file "
1660 				"size %zu/%zu\n", __func__, fw_hdr->size,
1661 				sizeof(struct firmware_hdr));
1662 			rc = -EBADF;
1663 		} else if (fw->size < MIN_FW_SIZE || fw->size > MAX_FW_SIZE) {
1664 			wiphy_err(wl->wiphy, "%s: out of bounds fw file size %zu\n",
1665 				  __func__, fw->size);
1666 			rc = -EBADF;
1667 		} else {
1668 			/* check if ucode section overruns firmware image */
1669 			ucode_hdr = (struct firmware_hdr *)fw_hdr->data;
1670 			for (entry = 0; entry < wl->fw.hdr_num_entries[i] &&
1671 			     !rc; entry++, ucode_hdr++) {
1672 				if (le32_to_cpu(ucode_hdr->offset) +
1673 				    le32_to_cpu(ucode_hdr->len) >
1674 				    fw->size) {
1675 					wiphy_err(wl->wiphy,
1676 						  "%s: conflicting bin/hdr\n",
1677 						  __func__);
1678 					rc = -EBADF;
1679 				}
1680 			}
1681 		}
1682 	}
1683 	if (rc == 0 && wl->fw.fw_cnt != i) {
1684 		wiphy_err(wl->wiphy, "%s: invalid fw_cnt=%d\n", __func__,
1685 			wl->fw.fw_cnt);
1686 		rc = -EBADF;
1687 	}
1688 	return rc;
1689 }
1690 
1691 /*
1692  * precondition: perimeter lock has been acquired
1693  */
1694 bool brcms_rfkill_set_hw_state(struct brcms_info *wl)
1695 {
1696 	bool blocked = brcms_c_check_radio_disabled(wl->wlc);
1697 
1698 	spin_unlock_bh(&wl->lock);
1699 	wiphy_rfkill_set_hw_state(wl->pub->ieee_hw->wiphy, blocked);
1700 	if (blocked)
1701 		wiphy_rfkill_start_polling(wl->pub->ieee_hw->wiphy);
1702 	spin_lock_bh(&wl->lock);
1703 	return blocked;
1704 }
1705