1 /*====================================================================== 2 3 A PCMCIA ethernet driver for SMC91c92-based cards. 4 5 This driver supports Megahertz PCMCIA ethernet cards; and 6 Megahertz, Motorola, Ositech, and Psion Dacom ethernet/modem 7 multifunction cards. 8 9 Copyright (C) 1999 David A. Hinds -- dahinds@users.sourceforge.net 10 11 smc91c92_cs.c 1.122 2002/10/25 06:26:39 12 13 This driver contains code written by Donald Becker 14 (becker@scyld.com), Rowan Hughes (x-csrdh@jcu.edu.au), 15 David Hinds (dahinds@users.sourceforge.net), and Erik Stahlman 16 (erik@vt.edu). Donald wrote the SMC 91c92 code using parts of 17 Erik's SMC 91c94 driver. Rowan wrote a similar driver, and I've 18 incorporated some parts of his driver here. I (Dave) wrote most 19 of the PCMCIA glue code, and the Ositech support code. Kelly 20 Stephens (kstephen@holli.com) added support for the Motorola 21 Mariner, with help from Allen Brost. 22 23 This software may be used and distributed according to the terms of 24 the GNU General Public License, incorporated herein by reference. 25 26 ======================================================================*/ 27 28 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt 29 30 #include <linux/module.h> 31 #include <linux/kernel.h> 32 #include <linux/init.h> 33 #include <linux/slab.h> 34 #include <linux/string.h> 35 #include <linux/timer.h> 36 #include <linux/interrupt.h> 37 #include <linux/delay.h> 38 #include <linux/crc32.h> 39 #include <linux/netdevice.h> 40 #include <linux/etherdevice.h> 41 #include <linux/skbuff.h> 42 #include <linux/if_arp.h> 43 #include <linux/ioport.h> 44 #include <linux/ethtool.h> 45 #include <linux/mii.h> 46 #include <linux/jiffies.h> 47 #include <linux/firmware.h> 48 49 #include <pcmcia/cistpl.h> 50 #include <pcmcia/cisreg.h> 51 #include <pcmcia/ciscode.h> 52 #include <pcmcia/ds.h> 53 #include <pcmcia/ss.h> 54 55 #include <asm/io.h> 56 #include <asm/uaccess.h> 57 58 /*====================================================================*/ 59 60 static const char *if_names[] = { "auto", "10baseT", "10base2"}; 61 62 /* Firmware name */ 63 #define FIRMWARE_NAME "ositech/Xilinx7OD.bin" 64 65 /* Module parameters */ 66 67 MODULE_DESCRIPTION("SMC 91c92 series PCMCIA ethernet driver"); 68 MODULE_LICENSE("GPL"); 69 MODULE_FIRMWARE(FIRMWARE_NAME); 70 71 #define INT_MODULE_PARM(n, v) static int n = v; module_param(n, int, 0) 72 73 /* 74 Transceiver/media type. 75 0 = auto 76 1 = 10baseT (and autoselect if #define AUTOSELECT), 77 2 = AUI/10base2, 78 */ 79 INT_MODULE_PARM(if_port, 0); 80 81 82 #define DRV_NAME "smc91c92_cs" 83 #define DRV_VERSION "1.123" 84 85 /*====================================================================*/ 86 87 /* Operational parameter that usually are not changed. */ 88 89 /* Time in jiffies before concluding Tx hung */ 90 #define TX_TIMEOUT ((400*HZ)/1000) 91 92 /* Maximum events (Rx packets, etc.) to handle at each interrupt. */ 93 #define INTR_WORK 4 94 95 /* Times to check the check the chip before concluding that it doesn't 96 currently have room for another Tx packet. */ 97 #define MEMORY_WAIT_TIME 8 98 99 struct smc_private { 100 struct pcmcia_device *p_dev; 101 spinlock_t lock; 102 u_short manfid; 103 u_short cardid; 104 105 struct sk_buff *saved_skb; 106 int packets_waiting; 107 void __iomem *base; 108 u_short cfg; 109 struct timer_list media; 110 int watchdog, tx_err; 111 u_short media_status; 112 u_short fast_poll; 113 u_short link_status; 114 struct mii_if_info mii_if; 115 int duplex; 116 int rx_ovrn; 117 }; 118 119 /* Special definitions for Megahertz multifunction cards */ 120 #define MEGAHERTZ_ISR 0x0380 121 122 /* Special function registers for Motorola Mariner */ 123 #define MOT_LAN 0x0000 124 #define MOT_UART 0x0020 125 #define MOT_EEPROM 0x20 126 127 #define MOT_NORMAL \ 128 (COR_LEVEL_REQ | COR_FUNC_ENA | COR_ADDR_DECODE | COR_IREQ_ENA) 129 130 /* Special function registers for Ositech cards */ 131 #define OSITECH_AUI_CTL 0x0c 132 #define OSITECH_PWRDOWN 0x0d 133 #define OSITECH_RESET 0x0e 134 #define OSITECH_ISR 0x0f 135 #define OSITECH_AUI_PWR 0x0c 136 #define OSITECH_RESET_ISR 0x0e 137 138 #define OSI_AUI_PWR 0x40 139 #define OSI_LAN_PWRDOWN 0x02 140 #define OSI_MODEM_PWRDOWN 0x01 141 #define OSI_LAN_RESET 0x02 142 #define OSI_MODEM_RESET 0x01 143 144 /* Symbolic constants for the SMC91c9* series chips, from Erik Stahlman. */ 145 #define BANK_SELECT 14 /* Window select register. */ 146 #define SMC_SELECT_BANK(x) { outw(x, ioaddr + BANK_SELECT); } 147 148 /* Bank 0 registers. */ 149 #define TCR 0 /* transmit control register */ 150 #define TCR_CLEAR 0 /* do NOTHING */ 151 #define TCR_ENABLE 0x0001 /* if this is 1, we can transmit */ 152 #define TCR_PAD_EN 0x0080 /* pads short packets to 64 bytes */ 153 #define TCR_MONCSN 0x0400 /* Monitor Carrier. */ 154 #define TCR_FDUPLX 0x0800 /* Full duplex mode. */ 155 #define TCR_NORMAL TCR_ENABLE | TCR_PAD_EN 156 157 #define EPH 2 /* Ethernet Protocol Handler report. */ 158 #define EPH_TX_SUC 0x0001 159 #define EPH_SNGLCOL 0x0002 160 #define EPH_MULCOL 0x0004 161 #define EPH_LTX_MULT 0x0008 162 #define EPH_16COL 0x0010 163 #define EPH_SQET 0x0020 164 #define EPH_LTX_BRD 0x0040 165 #define EPH_TX_DEFR 0x0080 166 #define EPH_LAT_COL 0x0200 167 #define EPH_LOST_CAR 0x0400 168 #define EPH_EXC_DEF 0x0800 169 #define EPH_CTR_ROL 0x1000 170 #define EPH_RX_OVRN 0x2000 171 #define EPH_LINK_OK 0x4000 172 #define EPH_TX_UNRN 0x8000 173 #define MEMINFO 8 /* Memory Information Register */ 174 #define MEMCFG 10 /* Memory Configuration Register */ 175 176 /* Bank 1 registers. */ 177 #define CONFIG 0 178 #define CFG_MII_SELECT 0x8000 /* 91C100 only */ 179 #define CFG_NO_WAIT 0x1000 180 #define CFG_FULL_STEP 0x0400 181 #define CFG_SET_SQLCH 0x0200 182 #define CFG_AUI_SELECT 0x0100 183 #define CFG_16BIT 0x0080 184 #define CFG_DIS_LINK 0x0040 185 #define CFG_STATIC 0x0030 186 #define CFG_IRQ_SEL_1 0x0004 187 #define CFG_IRQ_SEL_0 0x0002 188 #define BASE_ADDR 2 189 #define ADDR0 4 190 #define GENERAL 10 191 #define CONTROL 12 192 #define CTL_STORE 0x0001 193 #define CTL_RELOAD 0x0002 194 #define CTL_EE_SELECT 0x0004 195 #define CTL_TE_ENABLE 0x0020 196 #define CTL_CR_ENABLE 0x0040 197 #define CTL_LE_ENABLE 0x0080 198 #define CTL_AUTO_RELEASE 0x0800 199 #define CTL_POWERDOWN 0x2000 200 201 /* Bank 2 registers. */ 202 #define MMU_CMD 0 203 #define MC_ALLOC 0x20 /* or with number of 256 byte packets */ 204 #define MC_RESET 0x40 205 #define MC_RELEASE 0x80 /* remove and release the current rx packet */ 206 #define MC_FREEPKT 0xA0 /* Release packet in PNR register */ 207 #define MC_ENQUEUE 0xC0 /* Enqueue the packet for transmit */ 208 #define PNR_ARR 2 209 #define FIFO_PORTS 4 210 #define FP_RXEMPTY 0x8000 211 #define POINTER 6 212 #define PTR_AUTO_INC 0x0040 213 #define PTR_READ 0x2000 214 #define PTR_AUTOINC 0x4000 215 #define PTR_RCV 0x8000 216 #define DATA_1 8 217 #define INTERRUPT 12 218 #define IM_RCV_INT 0x1 219 #define IM_TX_INT 0x2 220 #define IM_TX_EMPTY_INT 0x4 221 #define IM_ALLOC_INT 0x8 222 #define IM_RX_OVRN_INT 0x10 223 #define IM_EPH_INT 0x20 224 225 #define RCR 4 226 enum RxCfg { RxAllMulti = 0x0004, RxPromisc = 0x0002, 227 RxEnable = 0x0100, RxStripCRC = 0x0200}; 228 #define RCR_SOFTRESET 0x8000 /* resets the chip */ 229 #define RCR_STRIP_CRC 0x200 /* strips CRC */ 230 #define RCR_ENABLE 0x100 /* IFF this is set, we can receive packets */ 231 #define RCR_ALMUL 0x4 /* receive all multicast packets */ 232 #define RCR_PROMISC 0x2 /* enable promiscuous mode */ 233 234 /* the normal settings for the RCR register : */ 235 #define RCR_NORMAL (RCR_STRIP_CRC | RCR_ENABLE) 236 #define RCR_CLEAR 0x0 /* set it to a base state */ 237 #define COUNTER 6 238 239 /* BANK 3 -- not the same values as in smc9194! */ 240 #define MULTICAST0 0 241 #define MULTICAST2 2 242 #define MULTICAST4 4 243 #define MULTICAST6 6 244 #define MGMT 8 245 #define REVISION 0x0a 246 247 /* Transmit status bits. */ 248 #define TS_SUCCESS 0x0001 249 #define TS_16COL 0x0010 250 #define TS_LATCOL 0x0200 251 #define TS_LOSTCAR 0x0400 252 253 /* Receive status bits. */ 254 #define RS_ALGNERR 0x8000 255 #define RS_BADCRC 0x2000 256 #define RS_ODDFRAME 0x1000 257 #define RS_TOOLONG 0x0800 258 #define RS_TOOSHORT 0x0400 259 #define RS_MULTICAST 0x0001 260 #define RS_ERRORS (RS_ALGNERR | RS_BADCRC | RS_TOOLONG | RS_TOOSHORT) 261 262 #define set_bits(v, p) outw(inw(p)|(v), (p)) 263 #define mask_bits(v, p) outw(inw(p)&(v), (p)) 264 265 /*====================================================================*/ 266 267 static void smc91c92_detach(struct pcmcia_device *p_dev); 268 static int smc91c92_config(struct pcmcia_device *link); 269 static void smc91c92_release(struct pcmcia_device *link); 270 271 static int smc_open(struct net_device *dev); 272 static int smc_close(struct net_device *dev); 273 static int smc_ioctl(struct net_device *dev, struct ifreq *rq, int cmd); 274 static void smc_tx_timeout(struct net_device *dev); 275 static netdev_tx_t smc_start_xmit(struct sk_buff *skb, 276 struct net_device *dev); 277 static irqreturn_t smc_interrupt(int irq, void *dev_id); 278 static void smc_rx(struct net_device *dev); 279 static void set_rx_mode(struct net_device *dev); 280 static int s9k_config(struct net_device *dev, struct ifmap *map); 281 static void smc_set_xcvr(struct net_device *dev, int if_port); 282 static void smc_reset(struct net_device *dev); 283 static void media_check(u_long arg); 284 static void mdio_sync(unsigned int addr); 285 static int mdio_read(struct net_device *dev, int phy_id, int loc); 286 static void mdio_write(struct net_device *dev, int phy_id, int loc, int value); 287 static int smc_link_ok(struct net_device *dev); 288 static const struct ethtool_ops ethtool_ops; 289 290 static const struct net_device_ops smc_netdev_ops = { 291 .ndo_open = smc_open, 292 .ndo_stop = smc_close, 293 .ndo_start_xmit = smc_start_xmit, 294 .ndo_tx_timeout = smc_tx_timeout, 295 .ndo_set_config = s9k_config, 296 .ndo_set_rx_mode = set_rx_mode, 297 .ndo_do_ioctl = smc_ioctl, 298 .ndo_change_mtu = eth_change_mtu, 299 .ndo_set_mac_address = eth_mac_addr, 300 .ndo_validate_addr = eth_validate_addr, 301 }; 302 303 static int smc91c92_probe(struct pcmcia_device *link) 304 { 305 struct smc_private *smc; 306 struct net_device *dev; 307 308 dev_dbg(&link->dev, "smc91c92_attach()\n"); 309 310 /* Create new ethernet device */ 311 dev = alloc_etherdev(sizeof(struct smc_private)); 312 if (!dev) 313 return -ENOMEM; 314 smc = netdev_priv(dev); 315 smc->p_dev = link; 316 link->priv = dev; 317 318 spin_lock_init(&smc->lock); 319 320 /* The SMC91c92-specific entries in the device structure. */ 321 dev->netdev_ops = &smc_netdev_ops; 322 SET_ETHTOOL_OPS(dev, ðtool_ops); 323 dev->watchdog_timeo = TX_TIMEOUT; 324 325 smc->mii_if.dev = dev; 326 smc->mii_if.mdio_read = mdio_read; 327 smc->mii_if.mdio_write = mdio_write; 328 smc->mii_if.phy_id_mask = 0x1f; 329 smc->mii_if.reg_num_mask = 0x1f; 330 331 return smc91c92_config(link); 332 } /* smc91c92_attach */ 333 334 static void smc91c92_detach(struct pcmcia_device *link) 335 { 336 struct net_device *dev = link->priv; 337 338 dev_dbg(&link->dev, "smc91c92_detach\n"); 339 340 unregister_netdev(dev); 341 342 smc91c92_release(link); 343 344 free_netdev(dev); 345 } /* smc91c92_detach */ 346 347 /*====================================================================*/ 348 349 static int cvt_ascii_address(struct net_device *dev, char *s) 350 { 351 int i, j, da, c; 352 353 if (strlen(s) != 12) 354 return -1; 355 for (i = 0; i < 6; i++) { 356 da = 0; 357 for (j = 0; j < 2; j++) { 358 c = *s++; 359 da <<= 4; 360 da += ((c >= '0') && (c <= '9')) ? 361 (c - '0') : ((c & 0x0f) + 9); 362 } 363 dev->dev_addr[i] = da; 364 } 365 return 0; 366 } 367 368 /*==================================================================== 369 370 Configuration stuff for Megahertz cards 371 372 mhz_3288_power() is used to power up a 3288's ethernet chip. 373 mhz_mfc_config() handles socket setup for multifunction (1144 374 and 3288) cards. mhz_setup() gets a card's hardware ethernet 375 address. 376 377 ======================================================================*/ 378 379 static int mhz_3288_power(struct pcmcia_device *link) 380 { 381 struct net_device *dev = link->priv; 382 struct smc_private *smc = netdev_priv(dev); 383 u_char tmp; 384 385 /* Read the ISR twice... */ 386 readb(smc->base+MEGAHERTZ_ISR); 387 udelay(5); 388 readb(smc->base+MEGAHERTZ_ISR); 389 390 /* Pause 200ms... */ 391 mdelay(200); 392 393 /* Now read and write the COR... */ 394 tmp = readb(smc->base + link->config_base + CISREG_COR); 395 udelay(5); 396 writeb(tmp, smc->base + link->config_base + CISREG_COR); 397 398 return 0; 399 } 400 401 static int mhz_mfc_config_check(struct pcmcia_device *p_dev, void *priv_data) 402 { 403 int k; 404 p_dev->io_lines = 16; 405 p_dev->resource[1]->start = p_dev->resource[0]->start; 406 p_dev->resource[1]->end = 8; 407 p_dev->resource[1]->flags &= ~IO_DATA_PATH_WIDTH; 408 p_dev->resource[1]->flags |= IO_DATA_PATH_WIDTH_8; 409 p_dev->resource[0]->end = 16; 410 p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; 411 p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO; 412 for (k = 0; k < 0x400; k += 0x10) { 413 if (k & 0x80) 414 continue; 415 p_dev->resource[0]->start = k ^ 0x300; 416 if (!pcmcia_request_io(p_dev)) 417 return 0; 418 } 419 return -ENODEV; 420 } 421 422 static int mhz_mfc_config(struct pcmcia_device *link) 423 { 424 struct net_device *dev = link->priv; 425 struct smc_private *smc = netdev_priv(dev); 426 unsigned int offset; 427 int i; 428 429 link->config_flags |= CONF_ENABLE_SPKR | CONF_ENABLE_IRQ | 430 CONF_AUTO_SET_IO; 431 432 /* The Megahertz combo cards have modem-like CIS entries, so 433 we have to explicitly try a bunch of port combinations. */ 434 if (pcmcia_loop_config(link, mhz_mfc_config_check, NULL)) 435 return -ENODEV; 436 437 dev->base_addr = link->resource[0]->start; 438 439 /* Allocate a memory window, for accessing the ISR */ 440 link->resource[2]->flags = WIN_DATA_WIDTH_8|WIN_MEMORY_TYPE_AM|WIN_ENABLE; 441 link->resource[2]->start = link->resource[2]->end = 0; 442 i = pcmcia_request_window(link, link->resource[2], 0); 443 if (i != 0) 444 return -ENODEV; 445 446 smc->base = ioremap(link->resource[2]->start, 447 resource_size(link->resource[2])); 448 offset = (smc->manfid == MANFID_MOTOROLA) ? link->config_base : 0; 449 i = pcmcia_map_mem_page(link, link->resource[2], offset); 450 if ((i == 0) && 451 (smc->manfid == MANFID_MEGAHERTZ) && 452 (smc->cardid == PRODID_MEGAHERTZ_EM3288)) 453 mhz_3288_power(link); 454 455 return 0; 456 } 457 458 static int pcmcia_get_versmac(struct pcmcia_device *p_dev, 459 tuple_t *tuple, 460 void *priv) 461 { 462 struct net_device *dev = priv; 463 cisparse_t parse; 464 u8 *buf; 465 466 if (pcmcia_parse_tuple(tuple, &parse)) 467 return -EINVAL; 468 469 buf = parse.version_1.str + parse.version_1.ofs[3]; 470 471 if ((parse.version_1.ns > 3) && (cvt_ascii_address(dev, buf) == 0)) 472 return 0; 473 474 return -EINVAL; 475 }; 476 477 static int mhz_setup(struct pcmcia_device *link) 478 { 479 struct net_device *dev = link->priv; 480 size_t len; 481 u8 *buf; 482 int rc; 483 484 /* Read the station address from the CIS. It is stored as the last 485 (fourth) string in the Version 1 Version/ID tuple. */ 486 if ((link->prod_id[3]) && 487 (cvt_ascii_address(dev, link->prod_id[3]) == 0)) 488 return 0; 489 490 /* Workarounds for broken cards start here. */ 491 /* Ugh -- the EM1144 card has two VERS_1 tuples!?! */ 492 if (!pcmcia_loop_tuple(link, CISTPL_VERS_1, pcmcia_get_versmac, dev)) 493 return 0; 494 495 /* Another possibility: for the EM3288, in a special tuple */ 496 rc = -1; 497 len = pcmcia_get_tuple(link, 0x81, &buf); 498 if (buf && len >= 13) { 499 buf[12] = '\0'; 500 if (cvt_ascii_address(dev, buf) == 0) 501 rc = 0; 502 } 503 kfree(buf); 504 505 return rc; 506 }; 507 508 /*====================================================================== 509 510 Configuration stuff for the Motorola Mariner 511 512 mot_config() writes directly to the Mariner configuration 513 registers because the CIS is just bogus. 514 515 ======================================================================*/ 516 517 static void mot_config(struct pcmcia_device *link) 518 { 519 struct net_device *dev = link->priv; 520 struct smc_private *smc = netdev_priv(dev); 521 unsigned int ioaddr = dev->base_addr; 522 unsigned int iouart = link->resource[1]->start; 523 524 /* Set UART base address and force map with COR bit 1 */ 525 writeb(iouart & 0xff, smc->base + MOT_UART + CISREG_IOBASE_0); 526 writeb((iouart >> 8) & 0xff, smc->base + MOT_UART + CISREG_IOBASE_1); 527 writeb(MOT_NORMAL, smc->base + MOT_UART + CISREG_COR); 528 529 /* Set SMC base address and force map with COR bit 1 */ 530 writeb(ioaddr & 0xff, smc->base + MOT_LAN + CISREG_IOBASE_0); 531 writeb((ioaddr >> 8) & 0xff, smc->base + MOT_LAN + CISREG_IOBASE_1); 532 writeb(MOT_NORMAL, smc->base + MOT_LAN + CISREG_COR); 533 534 /* Wait for things to settle down */ 535 mdelay(100); 536 } 537 538 static int mot_setup(struct pcmcia_device *link) 539 { 540 struct net_device *dev = link->priv; 541 unsigned int ioaddr = dev->base_addr; 542 int i, wait, loop; 543 u_int addr; 544 545 /* Read Ethernet address from Serial EEPROM */ 546 547 for (i = 0; i < 3; i++) { 548 SMC_SELECT_BANK(2); 549 outw(MOT_EEPROM + i, ioaddr + POINTER); 550 SMC_SELECT_BANK(1); 551 outw((CTL_RELOAD | CTL_EE_SELECT), ioaddr + CONTROL); 552 553 for (loop = wait = 0; loop < 200; loop++) { 554 udelay(10); 555 wait = ((CTL_RELOAD | CTL_STORE) & inw(ioaddr + CONTROL)); 556 if (wait == 0) break; 557 } 558 559 if (wait) 560 return -1; 561 562 addr = inw(ioaddr + GENERAL); 563 dev->dev_addr[2*i] = addr & 0xff; 564 dev->dev_addr[2*i+1] = (addr >> 8) & 0xff; 565 } 566 567 return 0; 568 } 569 570 /*====================================================================*/ 571 572 static int smc_configcheck(struct pcmcia_device *p_dev, void *priv_data) 573 { 574 p_dev->resource[0]->end = 16; 575 p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH; 576 p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_AUTO; 577 578 return pcmcia_request_io(p_dev); 579 } 580 581 static int smc_config(struct pcmcia_device *link) 582 { 583 struct net_device *dev = link->priv; 584 int i; 585 586 link->config_flags |= CONF_ENABLE_IRQ | CONF_AUTO_SET_IO; 587 588 i = pcmcia_loop_config(link, smc_configcheck, NULL); 589 if (!i) 590 dev->base_addr = link->resource[0]->start; 591 592 return i; 593 } 594 595 596 static int smc_setup(struct pcmcia_device *link) 597 { 598 struct net_device *dev = link->priv; 599 600 /* Check for a LAN function extension tuple */ 601 if (!pcmcia_get_mac_from_cis(link, dev)) 602 return 0; 603 604 /* Try the third string in the Version 1 Version/ID tuple. */ 605 if (link->prod_id[2]) { 606 if (cvt_ascii_address(dev, link->prod_id[2]) == 0) 607 return 0; 608 } 609 return -1; 610 } 611 612 /*====================================================================*/ 613 614 static int osi_config(struct pcmcia_device *link) 615 { 616 struct net_device *dev = link->priv; 617 static const unsigned int com[4] = { 0x3f8, 0x2f8, 0x3e8, 0x2e8 }; 618 int i, j; 619 620 link->config_flags |= CONF_ENABLE_SPKR | CONF_ENABLE_IRQ; 621 link->resource[0]->end = 64; 622 link->resource[1]->flags |= IO_DATA_PATH_WIDTH_8; 623 link->resource[1]->end = 8; 624 625 /* Enable Hard Decode, LAN, Modem */ 626 link->io_lines = 16; 627 link->config_index = 0x23; 628 629 for (i = j = 0; j < 4; j++) { 630 link->resource[1]->start = com[j]; 631 i = pcmcia_request_io(link); 632 if (i == 0) 633 break; 634 } 635 if (i != 0) { 636 /* Fallback: turn off hard decode */ 637 link->config_index = 0x03; 638 link->resource[1]->end = 0; 639 i = pcmcia_request_io(link); 640 } 641 dev->base_addr = link->resource[0]->start + 0x10; 642 return i; 643 } 644 645 static int osi_load_firmware(struct pcmcia_device *link) 646 { 647 const struct firmware *fw; 648 int i, err; 649 650 err = request_firmware(&fw, FIRMWARE_NAME, &link->dev); 651 if (err) { 652 pr_err("Failed to load firmware \"%s\"\n", FIRMWARE_NAME); 653 return err; 654 } 655 656 /* Download the Seven of Diamonds firmware */ 657 for (i = 0; i < fw->size; i++) { 658 outb(fw->data[i], link->resource[0]->start + 2); 659 udelay(50); 660 } 661 release_firmware(fw); 662 return err; 663 } 664 665 static int pcmcia_osi_mac(struct pcmcia_device *p_dev, 666 tuple_t *tuple, 667 void *priv) 668 { 669 struct net_device *dev = priv; 670 int i; 671 672 if (tuple->TupleDataLen < 8) 673 return -EINVAL; 674 if (tuple->TupleData[0] != 0x04) 675 return -EINVAL; 676 for (i = 0; i < 6; i++) 677 dev->dev_addr[i] = tuple->TupleData[i+2]; 678 return 0; 679 }; 680 681 682 static int osi_setup(struct pcmcia_device *link, u_short manfid, u_short cardid) 683 { 684 struct net_device *dev = link->priv; 685 int rc; 686 687 /* Read the station address from tuple 0x90, subtuple 0x04 */ 688 if (pcmcia_loop_tuple(link, 0x90, pcmcia_osi_mac, dev)) 689 return -1; 690 691 if (((manfid == MANFID_OSITECH) && 692 (cardid == PRODID_OSITECH_SEVEN)) || 693 ((manfid == MANFID_PSION) && 694 (cardid == PRODID_PSION_NET100))) { 695 rc = osi_load_firmware(link); 696 if (rc) 697 return rc; 698 } else if (manfid == MANFID_OSITECH) { 699 /* Make sure both functions are powered up */ 700 set_bits(0x300, link->resource[0]->start + OSITECH_AUI_PWR); 701 /* Now, turn on the interrupt for both card functions */ 702 set_bits(0x300, link->resource[0]->start + OSITECH_RESET_ISR); 703 dev_dbg(&link->dev, "AUI/PWR: %4.4x RESET/ISR: %4.4x\n", 704 inw(link->resource[0]->start + OSITECH_AUI_PWR), 705 inw(link->resource[0]->start + OSITECH_RESET_ISR)); 706 } 707 return 0; 708 } 709 710 static int smc91c92_suspend(struct pcmcia_device *link) 711 { 712 struct net_device *dev = link->priv; 713 714 if (link->open) 715 netif_device_detach(dev); 716 717 return 0; 718 } 719 720 static int smc91c92_resume(struct pcmcia_device *link) 721 { 722 struct net_device *dev = link->priv; 723 struct smc_private *smc = netdev_priv(dev); 724 int i; 725 726 if ((smc->manfid == MANFID_MEGAHERTZ) && 727 (smc->cardid == PRODID_MEGAHERTZ_EM3288)) 728 mhz_3288_power(link); 729 if (smc->manfid == MANFID_MOTOROLA) 730 mot_config(link); 731 if ((smc->manfid == MANFID_OSITECH) && 732 (smc->cardid != PRODID_OSITECH_SEVEN)) { 733 /* Power up the card and enable interrupts */ 734 set_bits(0x0300, dev->base_addr-0x10+OSITECH_AUI_PWR); 735 set_bits(0x0300, dev->base_addr-0x10+OSITECH_RESET_ISR); 736 } 737 if (((smc->manfid == MANFID_OSITECH) && 738 (smc->cardid == PRODID_OSITECH_SEVEN)) || 739 ((smc->manfid == MANFID_PSION) && 740 (smc->cardid == PRODID_PSION_NET100))) { 741 i = osi_load_firmware(link); 742 if (i) { 743 netdev_err(dev, "Failed to load firmware\n"); 744 return i; 745 } 746 } 747 if (link->open) { 748 smc_reset(dev); 749 netif_device_attach(dev); 750 } 751 752 return 0; 753 } 754 755 756 /*====================================================================== 757 758 This verifies that the chip is some SMC91cXX variant, and returns 759 the revision code if successful. Otherwise, it returns -ENODEV. 760 761 ======================================================================*/ 762 763 static int check_sig(struct pcmcia_device *link) 764 { 765 struct net_device *dev = link->priv; 766 unsigned int ioaddr = dev->base_addr; 767 int width; 768 u_short s; 769 770 SMC_SELECT_BANK(1); 771 if (inw(ioaddr + BANK_SELECT) >> 8 != 0x33) { 772 /* Try powering up the chip */ 773 outw(0, ioaddr + CONTROL); 774 mdelay(55); 775 } 776 777 /* Try setting bus width */ 778 width = (link->resource[0]->flags == IO_DATA_PATH_WIDTH_AUTO); 779 s = inb(ioaddr + CONFIG); 780 if (width) 781 s |= CFG_16BIT; 782 else 783 s &= ~CFG_16BIT; 784 outb(s, ioaddr + CONFIG); 785 786 /* Check Base Address Register to make sure bus width is OK */ 787 s = inw(ioaddr + BASE_ADDR); 788 if ((inw(ioaddr + BANK_SELECT) >> 8 == 0x33) && 789 ((s >> 8) != (s & 0xff))) { 790 SMC_SELECT_BANK(3); 791 s = inw(ioaddr + REVISION); 792 return s & 0xff; 793 } 794 795 if (width) { 796 netdev_info(dev, "using 8-bit IO window\n"); 797 798 smc91c92_suspend(link); 799 pcmcia_fixup_iowidth(link); 800 smc91c92_resume(link); 801 return check_sig(link); 802 } 803 return -ENODEV; 804 } 805 806 static int smc91c92_config(struct pcmcia_device *link) 807 { 808 struct net_device *dev = link->priv; 809 struct smc_private *smc = netdev_priv(dev); 810 char *name; 811 int i, rev, j = 0; 812 unsigned int ioaddr; 813 u_long mir; 814 815 dev_dbg(&link->dev, "smc91c92_config\n"); 816 817 smc->manfid = link->manf_id; 818 smc->cardid = link->card_id; 819 820 if ((smc->manfid == MANFID_OSITECH) && 821 (smc->cardid != PRODID_OSITECH_SEVEN)) { 822 i = osi_config(link); 823 } else if ((smc->manfid == MANFID_MOTOROLA) || 824 ((smc->manfid == MANFID_MEGAHERTZ) && 825 ((smc->cardid == PRODID_MEGAHERTZ_VARIOUS) || 826 (smc->cardid == PRODID_MEGAHERTZ_EM3288)))) { 827 i = mhz_mfc_config(link); 828 } else { 829 i = smc_config(link); 830 } 831 if (i) 832 goto config_failed; 833 834 i = pcmcia_request_irq(link, smc_interrupt); 835 if (i) 836 goto config_failed; 837 i = pcmcia_enable_device(link); 838 if (i) 839 goto config_failed; 840 841 if (smc->manfid == MANFID_MOTOROLA) 842 mot_config(link); 843 844 dev->irq = link->irq; 845 846 if ((if_port >= 0) && (if_port <= 2)) 847 dev->if_port = if_port; 848 else 849 dev_notice(&link->dev, "invalid if_port requested\n"); 850 851 switch (smc->manfid) { 852 case MANFID_OSITECH: 853 case MANFID_PSION: 854 i = osi_setup(link, smc->manfid, smc->cardid); break; 855 case MANFID_SMC: 856 case MANFID_NEW_MEDIA: 857 i = smc_setup(link); break; 858 case 0x128: /* For broken Megahertz cards */ 859 case MANFID_MEGAHERTZ: 860 i = mhz_setup(link); break; 861 case MANFID_MOTOROLA: 862 default: /* get the hw address from EEPROM */ 863 i = mot_setup(link); break; 864 } 865 866 if (i != 0) { 867 dev_notice(&link->dev, "Unable to find hardware address.\n"); 868 goto config_failed; 869 } 870 871 smc->duplex = 0; 872 smc->rx_ovrn = 0; 873 874 rev = check_sig(link); 875 name = "???"; 876 if (rev > 0) 877 switch (rev >> 4) { 878 case 3: name = "92"; break; 879 case 4: name = ((rev & 15) >= 6) ? "96" : "94"; break; 880 case 5: name = "95"; break; 881 case 7: name = "100"; break; 882 case 8: name = "100-FD"; break; 883 case 9: name = "110"; break; 884 } 885 886 ioaddr = dev->base_addr; 887 if (rev > 0) { 888 u_long mcr; 889 SMC_SELECT_BANK(0); 890 mir = inw(ioaddr + MEMINFO) & 0xff; 891 if (mir == 0xff) mir++; 892 /* Get scale factor for memory size */ 893 mcr = ((rev >> 4) > 3) ? inw(ioaddr + MEMCFG) : 0x0200; 894 mir *= 128 * (1<<((mcr >> 9) & 7)); 895 SMC_SELECT_BANK(1); 896 smc->cfg = inw(ioaddr + CONFIG) & ~CFG_AUI_SELECT; 897 smc->cfg |= CFG_NO_WAIT | CFG_16BIT | CFG_STATIC; 898 if (smc->manfid == MANFID_OSITECH) 899 smc->cfg |= CFG_IRQ_SEL_1 | CFG_IRQ_SEL_0; 900 if ((rev >> 4) >= 7) 901 smc->cfg |= CFG_MII_SELECT; 902 } else 903 mir = 0; 904 905 if (smc->cfg & CFG_MII_SELECT) { 906 SMC_SELECT_BANK(3); 907 908 for (i = 0; i < 32; i++) { 909 j = mdio_read(dev, i, 1); 910 if ((j != 0) && (j != 0xffff)) break; 911 } 912 smc->mii_if.phy_id = (i < 32) ? i : -1; 913 914 SMC_SELECT_BANK(0); 915 } 916 917 SET_NETDEV_DEV(dev, &link->dev); 918 919 if (register_netdev(dev) != 0) { 920 dev_err(&link->dev, "register_netdev() failed\n"); 921 goto config_undo; 922 } 923 924 netdev_info(dev, "smc91c%s rev %d: io %#3lx, irq %d, hw_addr %pM\n", 925 name, (rev & 0x0f), dev->base_addr, dev->irq, dev->dev_addr); 926 927 if (rev > 0) { 928 if (mir & 0x3ff) 929 netdev_info(dev, " %lu byte", mir); 930 else 931 netdev_info(dev, " %lu kb", mir>>10); 932 pr_cont(" buffer, %s xcvr\n", 933 (smc->cfg & CFG_MII_SELECT) ? "MII" : if_names[dev->if_port]); 934 } 935 936 if (smc->cfg & CFG_MII_SELECT) { 937 if (smc->mii_if.phy_id != -1) { 938 netdev_dbg(dev, " MII transceiver at index %d, status %x\n", 939 smc->mii_if.phy_id, j); 940 } else { 941 netdev_notice(dev, " No MII transceivers found!\n"); 942 } 943 } 944 return 0; 945 946 config_undo: 947 unregister_netdev(dev); 948 config_failed: 949 smc91c92_release(link); 950 free_netdev(dev); 951 return -ENODEV; 952 } /* smc91c92_config */ 953 954 static void smc91c92_release(struct pcmcia_device *link) 955 { 956 dev_dbg(&link->dev, "smc91c92_release\n"); 957 if (link->resource[2]->end) { 958 struct net_device *dev = link->priv; 959 struct smc_private *smc = netdev_priv(dev); 960 iounmap(smc->base); 961 } 962 pcmcia_disable_device(link); 963 } 964 965 /*====================================================================== 966 967 MII interface support for SMC91cXX based cards 968 ======================================================================*/ 969 970 #define MDIO_SHIFT_CLK 0x04 971 #define MDIO_DATA_OUT 0x01 972 #define MDIO_DIR_WRITE 0x08 973 #define MDIO_DATA_WRITE0 (MDIO_DIR_WRITE) 974 #define MDIO_DATA_WRITE1 (MDIO_DIR_WRITE | MDIO_DATA_OUT) 975 #define MDIO_DATA_READ 0x02 976 977 static void mdio_sync(unsigned int addr) 978 { 979 int bits; 980 for (bits = 0; bits < 32; bits++) { 981 outb(MDIO_DATA_WRITE1, addr); 982 outb(MDIO_DATA_WRITE1 | MDIO_SHIFT_CLK, addr); 983 } 984 } 985 986 static int mdio_read(struct net_device *dev, int phy_id, int loc) 987 { 988 unsigned int addr = dev->base_addr + MGMT; 989 u_int cmd = (0x06<<10)|(phy_id<<5)|loc; 990 int i, retval = 0; 991 992 mdio_sync(addr); 993 for (i = 13; i >= 0; i--) { 994 int dat = (cmd&(1<<i)) ? MDIO_DATA_WRITE1 : MDIO_DATA_WRITE0; 995 outb(dat, addr); 996 outb(dat | MDIO_SHIFT_CLK, addr); 997 } 998 for (i = 19; i > 0; i--) { 999 outb(0, addr); 1000 retval = (retval << 1) | ((inb(addr) & MDIO_DATA_READ) != 0); 1001 outb(MDIO_SHIFT_CLK, addr); 1002 } 1003 return (retval>>1) & 0xffff; 1004 } 1005 1006 static void mdio_write(struct net_device *dev, int phy_id, int loc, int value) 1007 { 1008 unsigned int addr = dev->base_addr + MGMT; 1009 u_int cmd = (0x05<<28)|(phy_id<<23)|(loc<<18)|(1<<17)|value; 1010 int i; 1011 1012 mdio_sync(addr); 1013 for (i = 31; i >= 0; i--) { 1014 int dat = (cmd&(1<<i)) ? MDIO_DATA_WRITE1 : MDIO_DATA_WRITE0; 1015 outb(dat, addr); 1016 outb(dat | MDIO_SHIFT_CLK, addr); 1017 } 1018 for (i = 1; i >= 0; i--) { 1019 outb(0, addr); 1020 outb(MDIO_SHIFT_CLK, addr); 1021 } 1022 } 1023 1024 /*====================================================================== 1025 1026 The driver core code, most of which should be common with a 1027 non-PCMCIA implementation. 1028 1029 ======================================================================*/ 1030 1031 #ifdef PCMCIA_DEBUG 1032 static void smc_dump(struct net_device *dev) 1033 { 1034 unsigned int ioaddr = dev->base_addr; 1035 u_short i, w, save; 1036 save = inw(ioaddr + BANK_SELECT); 1037 for (w = 0; w < 4; w++) { 1038 SMC_SELECT_BANK(w); 1039 netdev_dbg(dev, "bank %d: ", w); 1040 for (i = 0; i < 14; i += 2) 1041 pr_cont(" %04x", inw(ioaddr + i)); 1042 pr_cont("\n"); 1043 } 1044 outw(save, ioaddr + BANK_SELECT); 1045 } 1046 #endif 1047 1048 static int smc_open(struct net_device *dev) 1049 { 1050 struct smc_private *smc = netdev_priv(dev); 1051 struct pcmcia_device *link = smc->p_dev; 1052 1053 dev_dbg(&link->dev, "%s: smc_open(%p), ID/Window %4.4x.\n", 1054 dev->name, dev, inw(dev->base_addr + BANK_SELECT)); 1055 #ifdef PCMCIA_DEBUG 1056 smc_dump(dev); 1057 #endif 1058 1059 /* Check that the PCMCIA card is still here. */ 1060 if (!pcmcia_dev_present(link)) 1061 return -ENODEV; 1062 /* Physical device present signature. */ 1063 if (check_sig(link) < 0) { 1064 netdev_info(dev, "Yikes! Bad chip signature!\n"); 1065 return -ENODEV; 1066 } 1067 link->open++; 1068 1069 netif_start_queue(dev); 1070 smc->saved_skb = NULL; 1071 smc->packets_waiting = 0; 1072 1073 smc_reset(dev); 1074 init_timer(&smc->media); 1075 smc->media.function = media_check; 1076 smc->media.data = (u_long) dev; 1077 smc->media.expires = jiffies + HZ; 1078 add_timer(&smc->media); 1079 1080 return 0; 1081 } /* smc_open */ 1082 1083 /*====================================================================*/ 1084 1085 static int smc_close(struct net_device *dev) 1086 { 1087 struct smc_private *smc = netdev_priv(dev); 1088 struct pcmcia_device *link = smc->p_dev; 1089 unsigned int ioaddr = dev->base_addr; 1090 1091 dev_dbg(&link->dev, "%s: smc_close(), status %4.4x.\n", 1092 dev->name, inw(ioaddr + BANK_SELECT)); 1093 1094 netif_stop_queue(dev); 1095 1096 /* Shut off all interrupts, and turn off the Tx and Rx sections. 1097 Don't bother to check for chip present. */ 1098 SMC_SELECT_BANK(2); /* Nominally paranoia, but do no assume... */ 1099 outw(0, ioaddr + INTERRUPT); 1100 SMC_SELECT_BANK(0); 1101 mask_bits(0xff00, ioaddr + RCR); 1102 mask_bits(0xff00, ioaddr + TCR); 1103 1104 /* Put the chip into power-down mode. */ 1105 SMC_SELECT_BANK(1); 1106 outw(CTL_POWERDOWN, ioaddr + CONTROL ); 1107 1108 link->open--; 1109 del_timer_sync(&smc->media); 1110 1111 return 0; 1112 } /* smc_close */ 1113 1114 /*====================================================================== 1115 1116 Transfer a packet to the hardware and trigger the packet send. 1117 This may be called at either from either the Tx queue code 1118 or the interrupt handler. 1119 1120 ======================================================================*/ 1121 1122 static void smc_hardware_send_packet(struct net_device * dev) 1123 { 1124 struct smc_private *smc = netdev_priv(dev); 1125 struct sk_buff *skb = smc->saved_skb; 1126 unsigned int ioaddr = dev->base_addr; 1127 u_char packet_no; 1128 1129 if (!skb) { 1130 netdev_err(dev, "In XMIT with no packet to send\n"); 1131 return; 1132 } 1133 1134 /* There should be a packet slot waiting. */ 1135 packet_no = inw(ioaddr + PNR_ARR) >> 8; 1136 if (packet_no & 0x80) { 1137 /* If not, there is a hardware problem! Likely an ejected card. */ 1138 netdev_warn(dev, "hardware Tx buffer allocation failed, status %#2.2x\n", 1139 packet_no); 1140 dev_kfree_skb_irq(skb); 1141 smc->saved_skb = NULL; 1142 netif_start_queue(dev); 1143 return; 1144 } 1145 1146 dev->stats.tx_bytes += skb->len; 1147 /* The card should use the just-allocated buffer. */ 1148 outw(packet_no, ioaddr + PNR_ARR); 1149 /* point to the beginning of the packet */ 1150 outw(PTR_AUTOINC , ioaddr + POINTER); 1151 1152 /* Send the packet length (+6 for status, length and ctl byte) 1153 and the status word (set to zeros). */ 1154 { 1155 u_char *buf = skb->data; 1156 u_int length = skb->len; /* The chip will pad to ethernet min. */ 1157 1158 netdev_dbg(dev, "Trying to xmit packet of length %d\n", length); 1159 1160 /* send the packet length: +6 for status word, length, and ctl */ 1161 outw(0, ioaddr + DATA_1); 1162 outw(length + 6, ioaddr + DATA_1); 1163 outsw(ioaddr + DATA_1, buf, length >> 1); 1164 1165 /* The odd last byte, if there is one, goes in the control word. */ 1166 outw((length & 1) ? 0x2000 | buf[length-1] : 0, ioaddr + DATA_1); 1167 } 1168 1169 /* Enable the Tx interrupts, both Tx (TxErr) and TxEmpty. */ 1170 outw(((IM_TX_INT|IM_TX_EMPTY_INT)<<8) | 1171 (inw(ioaddr + INTERRUPT) & 0xff00), 1172 ioaddr + INTERRUPT); 1173 1174 /* The chip does the rest of the work. */ 1175 outw(MC_ENQUEUE , ioaddr + MMU_CMD); 1176 1177 smc->saved_skb = NULL; 1178 dev_kfree_skb_irq(skb); 1179 dev->trans_start = jiffies; 1180 netif_start_queue(dev); 1181 } 1182 1183 /*====================================================================*/ 1184 1185 static void smc_tx_timeout(struct net_device *dev) 1186 { 1187 struct smc_private *smc = netdev_priv(dev); 1188 unsigned int ioaddr = dev->base_addr; 1189 1190 netdev_notice(dev, "transmit timed out, Tx_status %2.2x status %4.4x.\n", 1191 inw(ioaddr)&0xff, inw(ioaddr + 2)); 1192 dev->stats.tx_errors++; 1193 smc_reset(dev); 1194 dev->trans_start = jiffies; /* prevent tx timeout */ 1195 smc->saved_skb = NULL; 1196 netif_wake_queue(dev); 1197 } 1198 1199 static netdev_tx_t smc_start_xmit(struct sk_buff *skb, 1200 struct net_device *dev) 1201 { 1202 struct smc_private *smc = netdev_priv(dev); 1203 unsigned int ioaddr = dev->base_addr; 1204 u_short num_pages; 1205 short time_out, ir; 1206 unsigned long flags; 1207 1208 netif_stop_queue(dev); 1209 1210 netdev_dbg(dev, "smc_start_xmit(length = %d) called, status %04x\n", 1211 skb->len, inw(ioaddr + 2)); 1212 1213 if (smc->saved_skb) { 1214 /* THIS SHOULD NEVER HAPPEN. */ 1215 dev->stats.tx_aborted_errors++; 1216 netdev_dbg(dev, "Internal error -- sent packet while busy\n"); 1217 return NETDEV_TX_BUSY; 1218 } 1219 smc->saved_skb = skb; 1220 1221 num_pages = skb->len >> 8; 1222 1223 if (num_pages > 7) { 1224 netdev_err(dev, "Far too big packet error: %d pages\n", num_pages); 1225 dev_kfree_skb (skb); 1226 smc->saved_skb = NULL; 1227 dev->stats.tx_dropped++; 1228 return NETDEV_TX_OK; /* Do not re-queue this packet. */ 1229 } 1230 /* A packet is now waiting. */ 1231 smc->packets_waiting++; 1232 1233 spin_lock_irqsave(&smc->lock, flags); 1234 SMC_SELECT_BANK(2); /* Paranoia, we should always be in window 2 */ 1235 1236 /* need MC_RESET to keep the memory consistent. errata? */ 1237 if (smc->rx_ovrn) { 1238 outw(MC_RESET, ioaddr + MMU_CMD); 1239 smc->rx_ovrn = 0; 1240 } 1241 1242 /* Allocate the memory; send the packet now if we win. */ 1243 outw(MC_ALLOC | num_pages, ioaddr + MMU_CMD); 1244 for (time_out = MEMORY_WAIT_TIME; time_out >= 0; time_out--) { 1245 ir = inw(ioaddr+INTERRUPT); 1246 if (ir & IM_ALLOC_INT) { 1247 /* Acknowledge the interrupt, send the packet. */ 1248 outw((ir&0xff00) | IM_ALLOC_INT, ioaddr + INTERRUPT); 1249 smc_hardware_send_packet(dev); /* Send the packet now.. */ 1250 spin_unlock_irqrestore(&smc->lock, flags); 1251 return NETDEV_TX_OK; 1252 } 1253 } 1254 1255 /* Otherwise defer until the Tx-space-allocated interrupt. */ 1256 netdev_dbg(dev, "memory allocation deferred.\n"); 1257 outw((IM_ALLOC_INT << 8) | (ir & 0xff00), ioaddr + INTERRUPT); 1258 spin_unlock_irqrestore(&smc->lock, flags); 1259 1260 return NETDEV_TX_OK; 1261 } 1262 1263 /*====================================================================== 1264 1265 Handle a Tx anomalous event. Entered while in Window 2. 1266 1267 ======================================================================*/ 1268 1269 static void smc_tx_err(struct net_device * dev) 1270 { 1271 struct smc_private *smc = netdev_priv(dev); 1272 unsigned int ioaddr = dev->base_addr; 1273 int saved_packet = inw(ioaddr + PNR_ARR) & 0xff; 1274 int packet_no = inw(ioaddr + FIFO_PORTS) & 0x7f; 1275 int tx_status; 1276 1277 /* select this as the packet to read from */ 1278 outw(packet_no, ioaddr + PNR_ARR); 1279 1280 /* read the first word from this packet */ 1281 outw(PTR_AUTOINC | PTR_READ | 0, ioaddr + POINTER); 1282 1283 tx_status = inw(ioaddr + DATA_1); 1284 1285 dev->stats.tx_errors++; 1286 if (tx_status & TS_LOSTCAR) dev->stats.tx_carrier_errors++; 1287 if (tx_status & TS_LATCOL) dev->stats.tx_window_errors++; 1288 if (tx_status & TS_16COL) { 1289 dev->stats.tx_aborted_errors++; 1290 smc->tx_err++; 1291 } 1292 1293 if (tx_status & TS_SUCCESS) { 1294 netdev_notice(dev, "Successful packet caused error interrupt?\n"); 1295 } 1296 /* re-enable transmit */ 1297 SMC_SELECT_BANK(0); 1298 outw(inw(ioaddr + TCR) | TCR_ENABLE | smc->duplex, ioaddr + TCR); 1299 SMC_SELECT_BANK(2); 1300 1301 outw(MC_FREEPKT, ioaddr + MMU_CMD); /* Free the packet memory. */ 1302 1303 /* one less packet waiting for me */ 1304 smc->packets_waiting--; 1305 1306 outw(saved_packet, ioaddr + PNR_ARR); 1307 } 1308 1309 /*====================================================================*/ 1310 1311 static void smc_eph_irq(struct net_device *dev) 1312 { 1313 struct smc_private *smc = netdev_priv(dev); 1314 unsigned int ioaddr = dev->base_addr; 1315 u_short card_stats, ephs; 1316 1317 SMC_SELECT_BANK(0); 1318 ephs = inw(ioaddr + EPH); 1319 netdev_dbg(dev, "Ethernet protocol handler interrupt, status %4.4x.\n", 1320 ephs); 1321 /* Could be a counter roll-over warning: update stats. */ 1322 card_stats = inw(ioaddr + COUNTER); 1323 /* single collisions */ 1324 dev->stats.collisions += card_stats & 0xF; 1325 card_stats >>= 4; 1326 /* multiple collisions */ 1327 dev->stats.collisions += card_stats & 0xF; 1328 #if 0 /* These are for when linux supports these statistics */ 1329 card_stats >>= 4; /* deferred */ 1330 card_stats >>= 4; /* excess deferred */ 1331 #endif 1332 /* If we had a transmit error we must re-enable the transmitter. */ 1333 outw(inw(ioaddr + TCR) | TCR_ENABLE | smc->duplex, ioaddr + TCR); 1334 1335 /* Clear a link error interrupt. */ 1336 SMC_SELECT_BANK(1); 1337 outw(CTL_AUTO_RELEASE | 0x0000, ioaddr + CONTROL); 1338 outw(CTL_AUTO_RELEASE | CTL_TE_ENABLE | CTL_CR_ENABLE, 1339 ioaddr + CONTROL); 1340 SMC_SELECT_BANK(2); 1341 } 1342 1343 /*====================================================================*/ 1344 1345 static irqreturn_t smc_interrupt(int irq, void *dev_id) 1346 { 1347 struct net_device *dev = dev_id; 1348 struct smc_private *smc = netdev_priv(dev); 1349 unsigned int ioaddr; 1350 u_short saved_bank, saved_pointer, mask, status; 1351 unsigned int handled = 1; 1352 char bogus_cnt = INTR_WORK; /* Work we are willing to do. */ 1353 1354 if (!netif_device_present(dev)) 1355 return IRQ_NONE; 1356 1357 ioaddr = dev->base_addr; 1358 1359 netdev_dbg(dev, "SMC91c92 interrupt %d at %#x.\n", 1360 irq, ioaddr); 1361 1362 spin_lock(&smc->lock); 1363 smc->watchdog = 0; 1364 saved_bank = inw(ioaddr + BANK_SELECT); 1365 if ((saved_bank & 0xff00) != 0x3300) { 1366 /* The device does not exist -- the card could be off-line, or 1367 maybe it has been ejected. */ 1368 netdev_dbg(dev, "SMC91c92 interrupt %d for non-existent/ejected device.\n", 1369 irq); 1370 handled = 0; 1371 goto irq_done; 1372 } 1373 1374 SMC_SELECT_BANK(2); 1375 saved_pointer = inw(ioaddr + POINTER); 1376 mask = inw(ioaddr + INTERRUPT) >> 8; 1377 /* clear all interrupts */ 1378 outw(0, ioaddr + INTERRUPT); 1379 1380 do { /* read the status flag, and mask it */ 1381 status = inw(ioaddr + INTERRUPT) & 0xff; 1382 netdev_dbg(dev, "Status is %#2.2x (mask %#2.2x).\n", 1383 status, mask); 1384 if ((status & mask) == 0) { 1385 if (bogus_cnt == INTR_WORK) 1386 handled = 0; 1387 break; 1388 } 1389 if (status & IM_RCV_INT) { 1390 /* Got a packet(s). */ 1391 smc_rx(dev); 1392 } 1393 if (status & IM_TX_INT) { 1394 smc_tx_err(dev); 1395 outw(IM_TX_INT, ioaddr + INTERRUPT); 1396 } 1397 status &= mask; 1398 if (status & IM_TX_EMPTY_INT) { 1399 outw(IM_TX_EMPTY_INT, ioaddr + INTERRUPT); 1400 mask &= ~IM_TX_EMPTY_INT; 1401 dev->stats.tx_packets += smc->packets_waiting; 1402 smc->packets_waiting = 0; 1403 } 1404 if (status & IM_ALLOC_INT) { 1405 /* Clear this interrupt so it doesn't happen again */ 1406 mask &= ~IM_ALLOC_INT; 1407 1408 smc_hardware_send_packet(dev); 1409 1410 /* enable xmit interrupts based on this */ 1411 mask |= (IM_TX_EMPTY_INT | IM_TX_INT); 1412 1413 /* and let the card send more packets to me */ 1414 netif_wake_queue(dev); 1415 } 1416 if (status & IM_RX_OVRN_INT) { 1417 dev->stats.rx_errors++; 1418 dev->stats.rx_fifo_errors++; 1419 if (smc->duplex) 1420 smc->rx_ovrn = 1; /* need MC_RESET outside smc_interrupt */ 1421 outw(IM_RX_OVRN_INT, ioaddr + INTERRUPT); 1422 } 1423 if (status & IM_EPH_INT) 1424 smc_eph_irq(dev); 1425 } while (--bogus_cnt); 1426 1427 netdev_dbg(dev, " Restoring saved registers mask %2.2x bank %4.4x pointer %4.4x.\n", 1428 mask, saved_bank, saved_pointer); 1429 1430 /* restore state register */ 1431 outw((mask<<8), ioaddr + INTERRUPT); 1432 outw(saved_pointer, ioaddr + POINTER); 1433 SMC_SELECT_BANK(saved_bank); 1434 1435 netdev_dbg(dev, "Exiting interrupt IRQ%d.\n", irq); 1436 1437 irq_done: 1438 1439 if ((smc->manfid == MANFID_OSITECH) && 1440 (smc->cardid != PRODID_OSITECH_SEVEN)) { 1441 /* Retrigger interrupt if needed */ 1442 mask_bits(0x00ff, ioaddr-0x10+OSITECH_RESET_ISR); 1443 set_bits(0x0300, ioaddr-0x10+OSITECH_RESET_ISR); 1444 } 1445 if (smc->manfid == MANFID_MOTOROLA) { 1446 u_char cor; 1447 cor = readb(smc->base + MOT_UART + CISREG_COR); 1448 writeb(cor & ~COR_IREQ_ENA, smc->base + MOT_UART + CISREG_COR); 1449 writeb(cor, smc->base + MOT_UART + CISREG_COR); 1450 cor = readb(smc->base + MOT_LAN + CISREG_COR); 1451 writeb(cor & ~COR_IREQ_ENA, smc->base + MOT_LAN + CISREG_COR); 1452 writeb(cor, smc->base + MOT_LAN + CISREG_COR); 1453 } 1454 1455 if ((smc->base != NULL) && /* Megahertz MFC's */ 1456 (smc->manfid == MANFID_MEGAHERTZ) && 1457 (smc->cardid == PRODID_MEGAHERTZ_EM3288)) { 1458 1459 u_char tmp; 1460 tmp = readb(smc->base+MEGAHERTZ_ISR); 1461 tmp = readb(smc->base+MEGAHERTZ_ISR); 1462 1463 /* Retrigger interrupt if needed */ 1464 writeb(tmp, smc->base + MEGAHERTZ_ISR); 1465 writeb(tmp, smc->base + MEGAHERTZ_ISR); 1466 } 1467 1468 spin_unlock(&smc->lock); 1469 return IRQ_RETVAL(handled); 1470 } 1471 1472 /*====================================================================*/ 1473 1474 static void smc_rx(struct net_device *dev) 1475 { 1476 unsigned int ioaddr = dev->base_addr; 1477 int rx_status; 1478 int packet_length; /* Caution: not frame length, rather words 1479 to transfer from the chip. */ 1480 1481 /* Assertion: we are in Window 2. */ 1482 1483 if (inw(ioaddr + FIFO_PORTS) & FP_RXEMPTY) { 1484 netdev_err(dev, "smc_rx() with nothing on Rx FIFO\n"); 1485 return; 1486 } 1487 1488 /* Reset the read pointer, and read the status and packet length. */ 1489 outw(PTR_READ | PTR_RCV | PTR_AUTOINC, ioaddr + POINTER); 1490 rx_status = inw(ioaddr + DATA_1); 1491 packet_length = inw(ioaddr + DATA_1) & 0x07ff; 1492 1493 netdev_dbg(dev, "Receive status %4.4x length %d.\n", 1494 rx_status, packet_length); 1495 1496 if (!(rx_status & RS_ERRORS)) { 1497 /* do stuff to make a new packet */ 1498 struct sk_buff *skb; 1499 1500 /* Note: packet_length adds 5 or 6 extra bytes here! */ 1501 skb = netdev_alloc_skb(dev, packet_length+2); 1502 1503 if (skb == NULL) { 1504 netdev_dbg(dev, "Low memory, packet dropped.\n"); 1505 dev->stats.rx_dropped++; 1506 outw(MC_RELEASE, ioaddr + MMU_CMD); 1507 return; 1508 } 1509 1510 packet_length -= (rx_status & RS_ODDFRAME ? 5 : 6); 1511 skb_reserve(skb, 2); 1512 insw(ioaddr+DATA_1, skb_put(skb, packet_length), 1513 (packet_length+1)>>1); 1514 skb->protocol = eth_type_trans(skb, dev); 1515 1516 netif_rx(skb); 1517 dev->last_rx = jiffies; 1518 dev->stats.rx_packets++; 1519 dev->stats.rx_bytes += packet_length; 1520 if (rx_status & RS_MULTICAST) 1521 dev->stats.multicast++; 1522 } else { 1523 /* error ... */ 1524 dev->stats.rx_errors++; 1525 1526 if (rx_status & RS_ALGNERR) dev->stats.rx_frame_errors++; 1527 if (rx_status & (RS_TOOSHORT | RS_TOOLONG)) 1528 dev->stats.rx_length_errors++; 1529 if (rx_status & RS_BADCRC) dev->stats.rx_crc_errors++; 1530 } 1531 /* Let the MMU free the memory of this packet. */ 1532 outw(MC_RELEASE, ioaddr + MMU_CMD); 1533 } 1534 1535 /*====================================================================== 1536 1537 Set the receive mode. 1538 1539 This routine is used by both the protocol level to notify us of 1540 promiscuous/multicast mode changes, and by the open/reset code to 1541 initialize the Rx registers. We always set the multicast list and 1542 leave the receiver running. 1543 1544 ======================================================================*/ 1545 1546 static void set_rx_mode(struct net_device *dev) 1547 { 1548 unsigned int ioaddr = dev->base_addr; 1549 struct smc_private *smc = netdev_priv(dev); 1550 unsigned char multicast_table[8]; 1551 unsigned long flags; 1552 u_short rx_cfg_setting; 1553 int i; 1554 1555 memset(multicast_table, 0, sizeof(multicast_table)); 1556 1557 if (dev->flags & IFF_PROMISC) { 1558 rx_cfg_setting = RxStripCRC | RxEnable | RxPromisc | RxAllMulti; 1559 } else if (dev->flags & IFF_ALLMULTI) 1560 rx_cfg_setting = RxStripCRC | RxEnable | RxAllMulti; 1561 else { 1562 if (!netdev_mc_empty(dev)) { 1563 struct netdev_hw_addr *ha; 1564 1565 netdev_for_each_mc_addr(ha, dev) { 1566 u_int position = ether_crc(6, ha->addr); 1567 multicast_table[position >> 29] |= 1 << ((position >> 26) & 7); 1568 } 1569 } 1570 rx_cfg_setting = RxStripCRC | RxEnable; 1571 } 1572 1573 /* Load MC table and Rx setting into the chip without interrupts. */ 1574 spin_lock_irqsave(&smc->lock, flags); 1575 SMC_SELECT_BANK(3); 1576 for (i = 0; i < 8; i++) 1577 outb(multicast_table[i], ioaddr + MULTICAST0 + i); 1578 SMC_SELECT_BANK(0); 1579 outw(rx_cfg_setting, ioaddr + RCR); 1580 SMC_SELECT_BANK(2); 1581 spin_unlock_irqrestore(&smc->lock, flags); 1582 } 1583 1584 /*====================================================================== 1585 1586 Senses when a card's config changes. Here, it's coax or TP. 1587 1588 ======================================================================*/ 1589 1590 static int s9k_config(struct net_device *dev, struct ifmap *map) 1591 { 1592 struct smc_private *smc = netdev_priv(dev); 1593 if ((map->port != (u_char)(-1)) && (map->port != dev->if_port)) { 1594 if (smc->cfg & CFG_MII_SELECT) 1595 return -EOPNOTSUPP; 1596 else if (map->port > 2) 1597 return -EINVAL; 1598 dev->if_port = map->port; 1599 netdev_info(dev, "switched to %s port\n", if_names[dev->if_port]); 1600 smc_reset(dev); 1601 } 1602 return 0; 1603 } 1604 1605 /*====================================================================== 1606 1607 Reset the chip, reloading every register that might be corrupted. 1608 1609 ======================================================================*/ 1610 1611 /* 1612 Set transceiver type, perhaps to something other than what the user 1613 specified in dev->if_port. 1614 */ 1615 static void smc_set_xcvr(struct net_device *dev, int if_port) 1616 { 1617 struct smc_private *smc = netdev_priv(dev); 1618 unsigned int ioaddr = dev->base_addr; 1619 u_short saved_bank; 1620 1621 saved_bank = inw(ioaddr + BANK_SELECT); 1622 SMC_SELECT_BANK(1); 1623 if (if_port == 2) { 1624 outw(smc->cfg | CFG_AUI_SELECT, ioaddr + CONFIG); 1625 if ((smc->manfid == MANFID_OSITECH) && 1626 (smc->cardid != PRODID_OSITECH_SEVEN)) 1627 set_bits(OSI_AUI_PWR, ioaddr - 0x10 + OSITECH_AUI_PWR); 1628 smc->media_status = ((dev->if_port == 0) ? 0x0001 : 0x0002); 1629 } else { 1630 outw(smc->cfg, ioaddr + CONFIG); 1631 if ((smc->manfid == MANFID_OSITECH) && 1632 (smc->cardid != PRODID_OSITECH_SEVEN)) 1633 mask_bits(~OSI_AUI_PWR, ioaddr - 0x10 + OSITECH_AUI_PWR); 1634 smc->media_status = ((dev->if_port == 0) ? 0x0012 : 0x4001); 1635 } 1636 SMC_SELECT_BANK(saved_bank); 1637 } 1638 1639 static void smc_reset(struct net_device *dev) 1640 { 1641 unsigned int ioaddr = dev->base_addr; 1642 struct smc_private *smc = netdev_priv(dev); 1643 int i; 1644 1645 netdev_dbg(dev, "smc91c92 reset called.\n"); 1646 1647 /* The first interaction must be a write to bring the chip out 1648 of sleep mode. */ 1649 SMC_SELECT_BANK(0); 1650 /* Reset the chip. */ 1651 outw(RCR_SOFTRESET, ioaddr + RCR); 1652 udelay(10); 1653 1654 /* Clear the transmit and receive configuration registers. */ 1655 outw(RCR_CLEAR, ioaddr + RCR); 1656 outw(TCR_CLEAR, ioaddr + TCR); 1657 1658 /* Set the Window 1 control, configuration and station addr registers. 1659 No point in writing the I/O base register ;-> */ 1660 SMC_SELECT_BANK(1); 1661 /* Automatically release successfully transmitted packets, 1662 Accept link errors, counter and Tx error interrupts. */ 1663 outw(CTL_AUTO_RELEASE | CTL_TE_ENABLE | CTL_CR_ENABLE, 1664 ioaddr + CONTROL); 1665 smc_set_xcvr(dev, dev->if_port); 1666 if ((smc->manfid == MANFID_OSITECH) && 1667 (smc->cardid != PRODID_OSITECH_SEVEN)) 1668 outw((dev->if_port == 2 ? OSI_AUI_PWR : 0) | 1669 (inw(ioaddr-0x10+OSITECH_AUI_PWR) & 0xff00), 1670 ioaddr - 0x10 + OSITECH_AUI_PWR); 1671 1672 /* Fill in the physical address. The databook is wrong about the order! */ 1673 for (i = 0; i < 6; i += 2) 1674 outw((dev->dev_addr[i+1]<<8)+dev->dev_addr[i], 1675 ioaddr + ADDR0 + i); 1676 1677 /* Reset the MMU */ 1678 SMC_SELECT_BANK(2); 1679 outw(MC_RESET, ioaddr + MMU_CMD); 1680 outw(0, ioaddr + INTERRUPT); 1681 1682 /* Re-enable the chip. */ 1683 SMC_SELECT_BANK(0); 1684 outw(((smc->cfg & CFG_MII_SELECT) ? 0 : TCR_MONCSN) | 1685 TCR_ENABLE | TCR_PAD_EN | smc->duplex, ioaddr + TCR); 1686 set_rx_mode(dev); 1687 1688 if (smc->cfg & CFG_MII_SELECT) { 1689 SMC_SELECT_BANK(3); 1690 1691 /* Reset MII */ 1692 mdio_write(dev, smc->mii_if.phy_id, 0, 0x8000); 1693 1694 /* Advertise 100F, 100H, 10F, 10H */ 1695 mdio_write(dev, smc->mii_if.phy_id, 4, 0x01e1); 1696 1697 /* Restart MII autonegotiation */ 1698 mdio_write(dev, smc->mii_if.phy_id, 0, 0x0000); 1699 mdio_write(dev, smc->mii_if.phy_id, 0, 0x1200); 1700 } 1701 1702 /* Enable interrupts. */ 1703 SMC_SELECT_BANK(2); 1704 outw((IM_EPH_INT | IM_RX_OVRN_INT | IM_RCV_INT) << 8, 1705 ioaddr + INTERRUPT); 1706 } 1707 1708 /*====================================================================== 1709 1710 Media selection timer routine 1711 1712 ======================================================================*/ 1713 1714 static void media_check(u_long arg) 1715 { 1716 struct net_device *dev = (struct net_device *) arg; 1717 struct smc_private *smc = netdev_priv(dev); 1718 unsigned int ioaddr = dev->base_addr; 1719 u_short i, media, saved_bank; 1720 u_short link; 1721 unsigned long flags; 1722 1723 spin_lock_irqsave(&smc->lock, flags); 1724 1725 saved_bank = inw(ioaddr + BANK_SELECT); 1726 1727 if (!netif_device_present(dev)) 1728 goto reschedule; 1729 1730 SMC_SELECT_BANK(2); 1731 1732 /* need MC_RESET to keep the memory consistent. errata? */ 1733 if (smc->rx_ovrn) { 1734 outw(MC_RESET, ioaddr + MMU_CMD); 1735 smc->rx_ovrn = 0; 1736 } 1737 i = inw(ioaddr + INTERRUPT); 1738 SMC_SELECT_BANK(0); 1739 media = inw(ioaddr + EPH) & EPH_LINK_OK; 1740 SMC_SELECT_BANK(1); 1741 media |= (inw(ioaddr + CONFIG) & CFG_AUI_SELECT) ? 2 : 1; 1742 1743 SMC_SELECT_BANK(saved_bank); 1744 spin_unlock_irqrestore(&smc->lock, flags); 1745 1746 /* Check for pending interrupt with watchdog flag set: with 1747 this, we can limp along even if the interrupt is blocked */ 1748 if (smc->watchdog++ && ((i>>8) & i)) { 1749 if (!smc->fast_poll) 1750 netdev_info(dev, "interrupt(s) dropped!\n"); 1751 local_irq_save(flags); 1752 smc_interrupt(dev->irq, dev); 1753 local_irq_restore(flags); 1754 smc->fast_poll = HZ; 1755 } 1756 if (smc->fast_poll) { 1757 smc->fast_poll--; 1758 smc->media.expires = jiffies + HZ/100; 1759 add_timer(&smc->media); 1760 return; 1761 } 1762 1763 spin_lock_irqsave(&smc->lock, flags); 1764 1765 saved_bank = inw(ioaddr + BANK_SELECT); 1766 1767 if (smc->cfg & CFG_MII_SELECT) { 1768 if (smc->mii_if.phy_id < 0) 1769 goto reschedule; 1770 1771 SMC_SELECT_BANK(3); 1772 link = mdio_read(dev, smc->mii_if.phy_id, 1); 1773 if (!link || (link == 0xffff)) { 1774 netdev_info(dev, "MII is missing!\n"); 1775 smc->mii_if.phy_id = -1; 1776 goto reschedule; 1777 } 1778 1779 link &= 0x0004; 1780 if (link != smc->link_status) { 1781 u_short p = mdio_read(dev, smc->mii_if.phy_id, 5); 1782 netdev_info(dev, "%s link beat\n", link ? "found" : "lost"); 1783 smc->duplex = (((p & 0x0100) || ((p & 0x1c0) == 0x40)) 1784 ? TCR_FDUPLX : 0); 1785 if (link) { 1786 netdev_info(dev, "autonegotiation complete: " 1787 "%dbaseT-%cD selected\n", 1788 (p & 0x0180) ? 100 : 10, smc->duplex ? 'F' : 'H'); 1789 } 1790 SMC_SELECT_BANK(0); 1791 outw(inw(ioaddr + TCR) | smc->duplex, ioaddr + TCR); 1792 smc->link_status = link; 1793 } 1794 goto reschedule; 1795 } 1796 1797 /* Ignore collisions unless we've had no rx's recently */ 1798 if (time_after(jiffies, dev->last_rx + HZ)) { 1799 if (smc->tx_err || (smc->media_status & EPH_16COL)) 1800 media |= EPH_16COL; 1801 } 1802 smc->tx_err = 0; 1803 1804 if (media != smc->media_status) { 1805 if ((media & smc->media_status & 1) && 1806 ((smc->media_status ^ media) & EPH_LINK_OK)) 1807 netdev_info(dev, "%s link beat\n", 1808 smc->media_status & EPH_LINK_OK ? "lost" : "found"); 1809 else if ((media & smc->media_status & 2) && 1810 ((smc->media_status ^ media) & EPH_16COL)) 1811 netdev_info(dev, "coax cable %s\n", 1812 media & EPH_16COL ? "problem" : "ok"); 1813 if (dev->if_port == 0) { 1814 if (media & 1) { 1815 if (media & EPH_LINK_OK) 1816 netdev_info(dev, "flipped to 10baseT\n"); 1817 else 1818 smc_set_xcvr(dev, 2); 1819 } else { 1820 if (media & EPH_16COL) 1821 smc_set_xcvr(dev, 1); 1822 else 1823 netdev_info(dev, "flipped to 10base2\n"); 1824 } 1825 } 1826 smc->media_status = media; 1827 } 1828 1829 reschedule: 1830 smc->media.expires = jiffies + HZ; 1831 add_timer(&smc->media); 1832 SMC_SELECT_BANK(saved_bank); 1833 spin_unlock_irqrestore(&smc->lock, flags); 1834 } 1835 1836 static int smc_link_ok(struct net_device *dev) 1837 { 1838 unsigned int ioaddr = dev->base_addr; 1839 struct smc_private *smc = netdev_priv(dev); 1840 1841 if (smc->cfg & CFG_MII_SELECT) { 1842 return mii_link_ok(&smc->mii_if); 1843 } else { 1844 SMC_SELECT_BANK(0); 1845 return inw(ioaddr + EPH) & EPH_LINK_OK; 1846 } 1847 } 1848 1849 static int smc_netdev_get_ecmd(struct net_device *dev, struct ethtool_cmd *ecmd) 1850 { 1851 u16 tmp; 1852 unsigned int ioaddr = dev->base_addr; 1853 1854 ecmd->supported = (SUPPORTED_TP | SUPPORTED_AUI | 1855 SUPPORTED_10baseT_Half | SUPPORTED_10baseT_Full); 1856 1857 SMC_SELECT_BANK(1); 1858 tmp = inw(ioaddr + CONFIG); 1859 ecmd->port = (tmp & CFG_AUI_SELECT) ? PORT_AUI : PORT_TP; 1860 ecmd->transceiver = XCVR_INTERNAL; 1861 ethtool_cmd_speed_set(ecmd, SPEED_10); 1862 ecmd->phy_address = ioaddr + MGMT; 1863 1864 SMC_SELECT_BANK(0); 1865 tmp = inw(ioaddr + TCR); 1866 ecmd->duplex = (tmp & TCR_FDUPLX) ? DUPLEX_FULL : DUPLEX_HALF; 1867 1868 return 0; 1869 } 1870 1871 static int smc_netdev_set_ecmd(struct net_device *dev, struct ethtool_cmd *ecmd) 1872 { 1873 u16 tmp; 1874 unsigned int ioaddr = dev->base_addr; 1875 1876 if (ethtool_cmd_speed(ecmd) != SPEED_10) 1877 return -EINVAL; 1878 if (ecmd->duplex != DUPLEX_HALF && ecmd->duplex != DUPLEX_FULL) 1879 return -EINVAL; 1880 if (ecmd->port != PORT_TP && ecmd->port != PORT_AUI) 1881 return -EINVAL; 1882 if (ecmd->transceiver != XCVR_INTERNAL) 1883 return -EINVAL; 1884 1885 if (ecmd->port == PORT_AUI) 1886 smc_set_xcvr(dev, 1); 1887 else 1888 smc_set_xcvr(dev, 0); 1889 1890 SMC_SELECT_BANK(0); 1891 tmp = inw(ioaddr + TCR); 1892 if (ecmd->duplex == DUPLEX_FULL) 1893 tmp |= TCR_FDUPLX; 1894 else 1895 tmp &= ~TCR_FDUPLX; 1896 outw(tmp, ioaddr + TCR); 1897 1898 return 0; 1899 } 1900 1901 static int check_if_running(struct net_device *dev) 1902 { 1903 if (!netif_running(dev)) 1904 return -EINVAL; 1905 return 0; 1906 } 1907 1908 static void smc_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info) 1909 { 1910 strlcpy(info->driver, DRV_NAME, sizeof(info->driver)); 1911 strlcpy(info->version, DRV_VERSION, sizeof(info->version)); 1912 } 1913 1914 static int smc_get_settings(struct net_device *dev, struct ethtool_cmd *ecmd) 1915 { 1916 struct smc_private *smc = netdev_priv(dev); 1917 unsigned int ioaddr = dev->base_addr; 1918 u16 saved_bank = inw(ioaddr + BANK_SELECT); 1919 int ret; 1920 unsigned long flags; 1921 1922 spin_lock_irqsave(&smc->lock, flags); 1923 SMC_SELECT_BANK(3); 1924 if (smc->cfg & CFG_MII_SELECT) 1925 ret = mii_ethtool_gset(&smc->mii_if, ecmd); 1926 else 1927 ret = smc_netdev_get_ecmd(dev, ecmd); 1928 SMC_SELECT_BANK(saved_bank); 1929 spin_unlock_irqrestore(&smc->lock, flags); 1930 return ret; 1931 } 1932 1933 static int smc_set_settings(struct net_device *dev, struct ethtool_cmd *ecmd) 1934 { 1935 struct smc_private *smc = netdev_priv(dev); 1936 unsigned int ioaddr = dev->base_addr; 1937 u16 saved_bank = inw(ioaddr + BANK_SELECT); 1938 int ret; 1939 unsigned long flags; 1940 1941 spin_lock_irqsave(&smc->lock, flags); 1942 SMC_SELECT_BANK(3); 1943 if (smc->cfg & CFG_MII_SELECT) 1944 ret = mii_ethtool_sset(&smc->mii_if, ecmd); 1945 else 1946 ret = smc_netdev_set_ecmd(dev, ecmd); 1947 SMC_SELECT_BANK(saved_bank); 1948 spin_unlock_irqrestore(&smc->lock, flags); 1949 return ret; 1950 } 1951 1952 static u32 smc_get_link(struct net_device *dev) 1953 { 1954 struct smc_private *smc = netdev_priv(dev); 1955 unsigned int ioaddr = dev->base_addr; 1956 u16 saved_bank = inw(ioaddr + BANK_SELECT); 1957 u32 ret; 1958 unsigned long flags; 1959 1960 spin_lock_irqsave(&smc->lock, flags); 1961 SMC_SELECT_BANK(3); 1962 ret = smc_link_ok(dev); 1963 SMC_SELECT_BANK(saved_bank); 1964 spin_unlock_irqrestore(&smc->lock, flags); 1965 return ret; 1966 } 1967 1968 static int smc_nway_reset(struct net_device *dev) 1969 { 1970 struct smc_private *smc = netdev_priv(dev); 1971 if (smc->cfg & CFG_MII_SELECT) { 1972 unsigned int ioaddr = dev->base_addr; 1973 u16 saved_bank = inw(ioaddr + BANK_SELECT); 1974 int res; 1975 1976 SMC_SELECT_BANK(3); 1977 res = mii_nway_restart(&smc->mii_if); 1978 SMC_SELECT_BANK(saved_bank); 1979 1980 return res; 1981 } else 1982 return -EOPNOTSUPP; 1983 } 1984 1985 static const struct ethtool_ops ethtool_ops = { 1986 .begin = check_if_running, 1987 .get_drvinfo = smc_get_drvinfo, 1988 .get_settings = smc_get_settings, 1989 .set_settings = smc_set_settings, 1990 .get_link = smc_get_link, 1991 .nway_reset = smc_nway_reset, 1992 }; 1993 1994 static int smc_ioctl (struct net_device *dev, struct ifreq *rq, int cmd) 1995 { 1996 struct smc_private *smc = netdev_priv(dev); 1997 struct mii_ioctl_data *mii = if_mii(rq); 1998 int rc = 0; 1999 u16 saved_bank; 2000 unsigned int ioaddr = dev->base_addr; 2001 unsigned long flags; 2002 2003 if (!netif_running(dev)) 2004 return -EINVAL; 2005 2006 spin_lock_irqsave(&smc->lock, flags); 2007 saved_bank = inw(ioaddr + BANK_SELECT); 2008 SMC_SELECT_BANK(3); 2009 rc = generic_mii_ioctl(&smc->mii_if, mii, cmd, NULL); 2010 SMC_SELECT_BANK(saved_bank); 2011 spin_unlock_irqrestore(&smc->lock, flags); 2012 return rc; 2013 } 2014 2015 static const struct pcmcia_device_id smc91c92_ids[] = { 2016 PCMCIA_PFC_DEVICE_MANF_CARD(0, 0x0109, 0x0501), 2017 PCMCIA_PFC_DEVICE_MANF_CARD(0, 0x0140, 0x000a), 2018 PCMCIA_PFC_DEVICE_PROD_ID123(0, "MEGAHERTZ", "CC/XJEM3288", "DATA/FAX/CELL ETHERNET MODEM", 0xf510db04, 0x04cd2988, 0x46a52d63), 2019 PCMCIA_PFC_DEVICE_PROD_ID123(0, "MEGAHERTZ", "CC/XJEM3336", "DATA/FAX/CELL ETHERNET MODEM", 0xf510db04, 0x0143b773, 0x46a52d63), 2020 PCMCIA_PFC_DEVICE_PROD_ID123(0, "MEGAHERTZ", "EM1144T", "PCMCIA MODEM", 0xf510db04, 0x856d66c8, 0xbd6c43ef), 2021 PCMCIA_PFC_DEVICE_PROD_ID123(0, "MEGAHERTZ", "XJEM1144/CCEM1144", "PCMCIA MODEM", 0xf510db04, 0x52d21e1e, 0xbd6c43ef), 2022 PCMCIA_PFC_DEVICE_PROD_ID12(0, "Gateway 2000", "XJEM3336", 0xdd9989be, 0x662c394c), 2023 PCMCIA_PFC_DEVICE_PROD_ID12(0, "MEGAHERTZ", "XJEM1144/CCEM1144", 0xf510db04, 0x52d21e1e), 2024 PCMCIA_PFC_DEVICE_PROD_ID12(0, "Ositech", "Trumpcard:Jack of Diamonds Modem+Ethernet", 0xc2f80cd, 0x656947b9), 2025 PCMCIA_PFC_DEVICE_PROD_ID12(0, "Ositech", "Trumpcard:Jack of Hearts Modem+Ethernet", 0xc2f80cd, 0xdc9ba5ed), 2026 PCMCIA_MFC_DEVICE_MANF_CARD(0, 0x016c, 0x0020), 2027 PCMCIA_DEVICE_MANF_CARD(0x016c, 0x0023), 2028 PCMCIA_DEVICE_PROD_ID123("BASICS by New Media Corporation", "Ethernet", "SMC91C94", 0x23c78a9d, 0x00b2e941, 0xcef397fb), 2029 PCMCIA_DEVICE_PROD_ID12("ARGOSY", "Fast Ethernet PCCard", 0x78f308dc, 0xdcea68bc), 2030 PCMCIA_DEVICE_PROD_ID12("dit Co., Ltd.", "PC Card-10/100BTX", 0xe59365c8, 0x6a2161d1), 2031 PCMCIA_DEVICE_PROD_ID12("DYNALINK", "L100C", 0x6a26d1cf, 0xc16ce9c5), 2032 PCMCIA_DEVICE_PROD_ID12("Farallon", "Farallon Enet", 0x58d93fc4, 0x244734e9), 2033 PCMCIA_DEVICE_PROD_ID12("Megahertz", "CC10BT/2", 0x33234748, 0x3c95b953), 2034 PCMCIA_DEVICE_PROD_ID12("MELCO/SMC", "LPC-TX", 0xa2cd8e6d, 0x42da662a), 2035 PCMCIA_DEVICE_PROD_ID12("Ositech", "Trumpcard:Four of Diamonds Ethernet", 0xc2f80cd, 0xb3466314), 2036 PCMCIA_DEVICE_PROD_ID12("Ositech", "Trumpcard:Seven of Diamonds Ethernet", 0xc2f80cd, 0x194b650a), 2037 PCMCIA_DEVICE_PROD_ID12("PCMCIA", "Fast Ethernet PCCard", 0x281f1c5d, 0xdcea68bc), 2038 PCMCIA_DEVICE_PROD_ID12("Psion", "10Mb Ethernet", 0x4ef00b21, 0x844be9e9), 2039 PCMCIA_DEVICE_PROD_ID12("SMC", "EtherEZ Ethernet 8020", 0xc4f8b18b, 0x4a0eeb2d), 2040 /* These conflict with other cards! */ 2041 /* PCMCIA_DEVICE_MANF_CARD(0x0186, 0x0100), */ 2042 /* PCMCIA_DEVICE_MANF_CARD(0x8a01, 0xc1ab), */ 2043 PCMCIA_DEVICE_NULL, 2044 }; 2045 MODULE_DEVICE_TABLE(pcmcia, smc91c92_ids); 2046 2047 static struct pcmcia_driver smc91c92_cs_driver = { 2048 .owner = THIS_MODULE, 2049 .name = "smc91c92_cs", 2050 .probe = smc91c92_probe, 2051 .remove = smc91c92_detach, 2052 .id_table = smc91c92_ids, 2053 .suspend = smc91c92_suspend, 2054 .resume = smc91c92_resume, 2055 }; 2056 module_pcmcia_driver(smc91c92_cs_driver); 2057