1 /******************************************************************************* 2 3 Intel 10 Gigabit PCI Express Linux driver 4 Copyright(c) 1999 - 2014 Intel Corporation. 5 6 This program is free software; you can redistribute it and/or modify it 7 under the terms and conditions of the GNU General Public License, 8 version 2, as published by the Free Software Foundation. 9 10 This program is distributed in the hope it will be useful, but WITHOUT 11 ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 12 FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for 13 more details. 14 15 You should have received a copy of the GNU General Public License along with 16 this program; if not, write to the Free Software Foundation, Inc., 17 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. 18 19 The full GNU General Public License is included in this distribution in 20 the file called "COPYING". 21 22 Contact Information: 23 Linux NICS <linux.nics@intel.com> 24 e1000-devel Mailing List <e1000-devel@lists.sourceforge.net> 25 Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497 26 27 *******************************************************************************/ 28 29 #include <linux/pci.h> 30 #include <linux/delay.h> 31 #include <linux/sched.h> 32 33 #include "ixgbe.h" 34 #include "ixgbe_phy.h" 35 #include "ixgbe_x540.h" 36 37 #define IXGBE_X540_MAX_TX_QUEUES 128 38 #define IXGBE_X540_MAX_RX_QUEUES 128 39 #define IXGBE_X540_RAR_ENTRIES 128 40 #define IXGBE_X540_MC_TBL_SIZE 128 41 #define IXGBE_X540_VFT_TBL_SIZE 128 42 #define IXGBE_X540_RX_PB_SIZE 384 43 44 static s32 ixgbe_update_flash_X540(struct ixgbe_hw *hw); 45 static s32 ixgbe_poll_flash_update_done_X540(struct ixgbe_hw *hw); 46 static s32 ixgbe_get_swfw_sync_semaphore(struct ixgbe_hw *hw); 47 static void ixgbe_release_swfw_sync_semaphore(struct ixgbe_hw *hw); 48 49 enum ixgbe_media_type ixgbe_get_media_type_X540(struct ixgbe_hw *hw) 50 { 51 return ixgbe_media_type_copper; 52 } 53 54 s32 ixgbe_get_invariants_X540(struct ixgbe_hw *hw) 55 { 56 struct ixgbe_mac_info *mac = &hw->mac; 57 struct ixgbe_phy_info *phy = &hw->phy; 58 59 /* set_phy_power was set by default to NULL */ 60 if (!ixgbe_mng_present(hw)) 61 phy->ops.set_phy_power = ixgbe_set_copper_phy_power; 62 63 mac->mcft_size = IXGBE_X540_MC_TBL_SIZE; 64 mac->vft_size = IXGBE_X540_VFT_TBL_SIZE; 65 mac->num_rar_entries = IXGBE_X540_RAR_ENTRIES; 66 mac->rx_pb_size = IXGBE_X540_RX_PB_SIZE; 67 mac->max_rx_queues = IXGBE_X540_MAX_RX_QUEUES; 68 mac->max_tx_queues = IXGBE_X540_MAX_TX_QUEUES; 69 mac->max_msix_vectors = ixgbe_get_pcie_msix_count_generic(hw); 70 71 return 0; 72 } 73 74 /** 75 * ixgbe_setup_mac_link_X540 - Set the auto advertised capabilitires 76 * @hw: pointer to hardware structure 77 * @speed: new link speed 78 * @autoneg_wait_to_complete: true when waiting for completion is needed 79 **/ 80 s32 ixgbe_setup_mac_link_X540(struct ixgbe_hw *hw, ixgbe_link_speed speed, 81 bool autoneg_wait_to_complete) 82 { 83 return hw->phy.ops.setup_link_speed(hw, speed, 84 autoneg_wait_to_complete); 85 } 86 87 /** 88 * ixgbe_reset_hw_X540 - Perform hardware reset 89 * @hw: pointer to hardware structure 90 * 91 * Resets the hardware by resetting the transmit and receive units, masks 92 * and clears all interrupts, perform a PHY reset, and perform a link (MAC) 93 * reset. 94 **/ 95 s32 ixgbe_reset_hw_X540(struct ixgbe_hw *hw) 96 { 97 s32 status; 98 u32 ctrl, i; 99 100 /* Call adapter stop to disable tx/rx and clear interrupts */ 101 status = hw->mac.ops.stop_adapter(hw); 102 if (status) 103 return status; 104 105 /* flush pending Tx transactions */ 106 ixgbe_clear_tx_pending(hw); 107 108 mac_reset_top: 109 ctrl = IXGBE_CTRL_RST; 110 ctrl |= IXGBE_READ_REG(hw, IXGBE_CTRL); 111 IXGBE_WRITE_REG(hw, IXGBE_CTRL, ctrl); 112 IXGBE_WRITE_FLUSH(hw); 113 114 /* Poll for reset bit to self-clear indicating reset is complete */ 115 for (i = 0; i < 10; i++) { 116 udelay(1); 117 ctrl = IXGBE_READ_REG(hw, IXGBE_CTRL); 118 if (!(ctrl & IXGBE_CTRL_RST_MASK)) 119 break; 120 } 121 122 if (ctrl & IXGBE_CTRL_RST_MASK) { 123 status = IXGBE_ERR_RESET_FAILED; 124 hw_dbg(hw, "Reset polling failed to complete.\n"); 125 } 126 msleep(100); 127 128 /* 129 * Double resets are required for recovery from certain error 130 * conditions. Between resets, it is necessary to stall to allow time 131 * for any pending HW events to complete. 132 */ 133 if (hw->mac.flags & IXGBE_FLAGS_DOUBLE_RESET_REQUIRED) { 134 hw->mac.flags &= ~IXGBE_FLAGS_DOUBLE_RESET_REQUIRED; 135 goto mac_reset_top; 136 } 137 138 /* Set the Rx packet buffer size. */ 139 IXGBE_WRITE_REG(hw, IXGBE_RXPBSIZE(0), 384 << IXGBE_RXPBSIZE_SHIFT); 140 141 /* Store the permanent mac address */ 142 hw->mac.ops.get_mac_addr(hw, hw->mac.perm_addr); 143 144 /* 145 * Store MAC address from RAR0, clear receive address registers, and 146 * clear the multicast table. Also reset num_rar_entries to 128, 147 * since we modify this value when programming the SAN MAC address. 148 */ 149 hw->mac.num_rar_entries = IXGBE_X540_MAX_TX_QUEUES; 150 hw->mac.ops.init_rx_addrs(hw); 151 152 /* Store the permanent SAN mac address */ 153 hw->mac.ops.get_san_mac_addr(hw, hw->mac.san_addr); 154 155 /* Add the SAN MAC address to the RAR only if it's a valid address */ 156 if (is_valid_ether_addr(hw->mac.san_addr)) { 157 hw->mac.ops.set_rar(hw, hw->mac.num_rar_entries - 1, 158 hw->mac.san_addr, 0, IXGBE_RAH_AV); 159 160 /* Save the SAN MAC RAR index */ 161 hw->mac.san_mac_rar_index = hw->mac.num_rar_entries - 1; 162 163 /* Reserve the last RAR for the SAN MAC address */ 164 hw->mac.num_rar_entries--; 165 } 166 167 /* Store the alternative WWNN/WWPN prefix */ 168 hw->mac.ops.get_wwn_prefix(hw, &hw->mac.wwnn_prefix, 169 &hw->mac.wwpn_prefix); 170 171 return status; 172 } 173 174 /** 175 * ixgbe_start_hw_X540 - Prepare hardware for Tx/Rx 176 * @hw: pointer to hardware structure 177 * 178 * Starts the hardware using the generic start_hw function 179 * and the generation start_hw function. 180 * Then performs revision-specific operations, if any. 181 **/ 182 s32 ixgbe_start_hw_X540(struct ixgbe_hw *hw) 183 { 184 s32 ret_val; 185 186 ret_val = ixgbe_start_hw_generic(hw); 187 if (ret_val) 188 return ret_val; 189 190 return ixgbe_start_hw_gen2(hw); 191 } 192 193 /** 194 * ixgbe_init_eeprom_params_X540 - Initialize EEPROM params 195 * @hw: pointer to hardware structure 196 * 197 * Initializes the EEPROM parameters ixgbe_eeprom_info within the 198 * ixgbe_hw struct in order to set up EEPROM access. 199 **/ 200 s32 ixgbe_init_eeprom_params_X540(struct ixgbe_hw *hw) 201 { 202 struct ixgbe_eeprom_info *eeprom = &hw->eeprom; 203 u32 eec; 204 u16 eeprom_size; 205 206 if (eeprom->type == ixgbe_eeprom_uninitialized) { 207 eeprom->semaphore_delay = 10; 208 eeprom->type = ixgbe_flash; 209 210 eec = IXGBE_READ_REG(hw, IXGBE_EEC(hw)); 211 eeprom_size = (u16)((eec & IXGBE_EEC_SIZE) >> 212 IXGBE_EEC_SIZE_SHIFT); 213 eeprom->word_size = 1 << (eeprom_size + 214 IXGBE_EEPROM_WORD_SIZE_SHIFT); 215 216 hw_dbg(hw, "Eeprom params: type = %d, size = %d\n", 217 eeprom->type, eeprom->word_size); 218 } 219 220 return 0; 221 } 222 223 /** 224 * ixgbe_read_eerd_X540- Read EEPROM word using EERD 225 * @hw: pointer to hardware structure 226 * @offset: offset of word in the EEPROM to read 227 * @data: word read from the EEPROM 228 * 229 * Reads a 16 bit word from the EEPROM using the EERD register. 230 **/ 231 static s32 ixgbe_read_eerd_X540(struct ixgbe_hw *hw, u16 offset, u16 *data) 232 { 233 s32 status; 234 235 if (hw->mac.ops.acquire_swfw_sync(hw, IXGBE_GSSR_EEP_SM)) 236 return IXGBE_ERR_SWFW_SYNC; 237 238 status = ixgbe_read_eerd_generic(hw, offset, data); 239 240 hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_EEP_SM); 241 return status; 242 } 243 244 /** 245 * ixgbe_read_eerd_buffer_X540 - Read EEPROM word(s) using EERD 246 * @hw: pointer to hardware structure 247 * @offset: offset of word in the EEPROM to read 248 * @words: number of words 249 * @data: word(s) read from the EEPROM 250 * 251 * Reads a 16 bit word(s) from the EEPROM using the EERD register. 252 **/ 253 static s32 ixgbe_read_eerd_buffer_X540(struct ixgbe_hw *hw, 254 u16 offset, u16 words, u16 *data) 255 { 256 s32 status; 257 258 if (hw->mac.ops.acquire_swfw_sync(hw, IXGBE_GSSR_EEP_SM)) 259 return IXGBE_ERR_SWFW_SYNC; 260 261 status = ixgbe_read_eerd_buffer_generic(hw, offset, words, data); 262 263 hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_EEP_SM); 264 return status; 265 } 266 267 /** 268 * ixgbe_write_eewr_X540 - Write EEPROM word using EEWR 269 * @hw: pointer to hardware structure 270 * @offset: offset of word in the EEPROM to write 271 * @data: word write to the EEPROM 272 * 273 * Write a 16 bit word to the EEPROM using the EEWR register. 274 **/ 275 static s32 ixgbe_write_eewr_X540(struct ixgbe_hw *hw, u16 offset, u16 data) 276 { 277 s32 status; 278 279 if (hw->mac.ops.acquire_swfw_sync(hw, IXGBE_GSSR_EEP_SM)) 280 return IXGBE_ERR_SWFW_SYNC; 281 282 status = ixgbe_write_eewr_generic(hw, offset, data); 283 284 hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_EEP_SM); 285 return status; 286 } 287 288 /** 289 * ixgbe_write_eewr_buffer_X540 - Write EEPROM word(s) using EEWR 290 * @hw: pointer to hardware structure 291 * @offset: offset of word in the EEPROM to write 292 * @words: number of words 293 * @data: word(s) write to the EEPROM 294 * 295 * Write a 16 bit word(s) to the EEPROM using the EEWR register. 296 **/ 297 static s32 ixgbe_write_eewr_buffer_X540(struct ixgbe_hw *hw, 298 u16 offset, u16 words, u16 *data) 299 { 300 s32 status; 301 302 if (hw->mac.ops.acquire_swfw_sync(hw, IXGBE_GSSR_EEP_SM)) 303 return IXGBE_ERR_SWFW_SYNC; 304 305 status = ixgbe_write_eewr_buffer_generic(hw, offset, words, data); 306 307 hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_EEP_SM); 308 return status; 309 } 310 311 /** 312 * ixgbe_calc_eeprom_checksum_X540 - Calculates and returns the checksum 313 * 314 * This function does not use synchronization for EERD and EEWR. It can 315 * be used internally by function which utilize ixgbe_acquire_swfw_sync_X540. 316 * 317 * @hw: pointer to hardware structure 318 **/ 319 static s32 ixgbe_calc_eeprom_checksum_X540(struct ixgbe_hw *hw) 320 { 321 u16 i; 322 u16 j; 323 u16 checksum = 0; 324 u16 length = 0; 325 u16 pointer = 0; 326 u16 word = 0; 327 u16 checksum_last_word = IXGBE_EEPROM_CHECKSUM; 328 u16 ptr_start = IXGBE_PCIE_ANALOG_PTR; 329 330 /* 331 * Do not use hw->eeprom.ops.read because we do not want to take 332 * the synchronization semaphores here. Instead use 333 * ixgbe_read_eerd_generic 334 */ 335 336 /* Include 0x0-0x3F in the checksum */ 337 for (i = 0; i < checksum_last_word; i++) { 338 if (ixgbe_read_eerd_generic(hw, i, &word)) { 339 hw_dbg(hw, "EEPROM read failed\n"); 340 return IXGBE_ERR_EEPROM; 341 } 342 checksum += word; 343 } 344 345 /* 346 * Include all data from pointers 0x3, 0x6-0xE. This excludes the 347 * FW, PHY module, and PCIe Expansion/Option ROM pointers. 348 */ 349 for (i = ptr_start; i < IXGBE_FW_PTR; i++) { 350 if (i == IXGBE_PHY_PTR || i == IXGBE_OPTION_ROM_PTR) 351 continue; 352 353 if (ixgbe_read_eerd_generic(hw, i, &pointer)) { 354 hw_dbg(hw, "EEPROM read failed\n"); 355 break; 356 } 357 358 /* Skip pointer section if the pointer is invalid. */ 359 if (pointer == 0xFFFF || pointer == 0 || 360 pointer >= hw->eeprom.word_size) 361 continue; 362 363 if (ixgbe_read_eerd_generic(hw, pointer, &length)) { 364 hw_dbg(hw, "EEPROM read failed\n"); 365 return IXGBE_ERR_EEPROM; 366 break; 367 } 368 369 /* Skip pointer section if length is invalid. */ 370 if (length == 0xFFFF || length == 0 || 371 (pointer + length) >= hw->eeprom.word_size) 372 continue; 373 374 for (j = pointer + 1; j <= pointer + length; j++) { 375 if (ixgbe_read_eerd_generic(hw, j, &word)) { 376 hw_dbg(hw, "EEPROM read failed\n"); 377 return IXGBE_ERR_EEPROM; 378 } 379 checksum += word; 380 } 381 } 382 383 checksum = (u16)IXGBE_EEPROM_SUM - checksum; 384 385 return (s32)checksum; 386 } 387 388 /** 389 * ixgbe_validate_eeprom_checksum_X540 - Validate EEPROM checksum 390 * @hw: pointer to hardware structure 391 * @checksum_val: calculated checksum 392 * 393 * Performs checksum calculation and validates the EEPROM checksum. If the 394 * caller does not need checksum_val, the value can be NULL. 395 **/ 396 static s32 ixgbe_validate_eeprom_checksum_X540(struct ixgbe_hw *hw, 397 u16 *checksum_val) 398 { 399 s32 status; 400 u16 checksum; 401 u16 read_checksum = 0; 402 403 /* Read the first word from the EEPROM. If this times out or fails, do 404 * not continue or we could be in for a very long wait while every 405 * EEPROM read fails 406 */ 407 status = hw->eeprom.ops.read(hw, 0, &checksum); 408 if (status) { 409 hw_dbg(hw, "EEPROM read failed\n"); 410 return status; 411 } 412 413 if (hw->mac.ops.acquire_swfw_sync(hw, IXGBE_GSSR_EEP_SM)) 414 return IXGBE_ERR_SWFW_SYNC; 415 416 status = hw->eeprom.ops.calc_checksum(hw); 417 if (status < 0) 418 goto out; 419 420 checksum = (u16)(status & 0xffff); 421 422 /* Do not use hw->eeprom.ops.read because we do not want to take 423 * the synchronization semaphores twice here. 424 */ 425 status = ixgbe_read_eerd_generic(hw, IXGBE_EEPROM_CHECKSUM, 426 &read_checksum); 427 if (status) 428 goto out; 429 430 /* Verify read checksum from EEPROM is the same as 431 * calculated checksum 432 */ 433 if (read_checksum != checksum) { 434 hw_dbg(hw, "Invalid EEPROM checksum"); 435 status = IXGBE_ERR_EEPROM_CHECKSUM; 436 } 437 438 /* If the user cares, return the calculated checksum */ 439 if (checksum_val) 440 *checksum_val = checksum; 441 442 out: 443 hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_EEP_SM); 444 445 return status; 446 } 447 448 /** 449 * ixgbe_update_eeprom_checksum_X540 - Updates the EEPROM checksum and flash 450 * @hw: pointer to hardware structure 451 * 452 * After writing EEPROM to shadow RAM using EEWR register, software calculates 453 * checksum and updates the EEPROM and instructs the hardware to update 454 * the flash. 455 **/ 456 static s32 ixgbe_update_eeprom_checksum_X540(struct ixgbe_hw *hw) 457 { 458 s32 status; 459 u16 checksum; 460 461 /* Read the first word from the EEPROM. If this times out or fails, do 462 * not continue or we could be in for a very long wait while every 463 * EEPROM read fails 464 */ 465 status = hw->eeprom.ops.read(hw, 0, &checksum); 466 if (status) { 467 hw_dbg(hw, "EEPROM read failed\n"); 468 return status; 469 } 470 471 if (hw->mac.ops.acquire_swfw_sync(hw, IXGBE_GSSR_EEP_SM)) 472 return IXGBE_ERR_SWFW_SYNC; 473 474 status = hw->eeprom.ops.calc_checksum(hw); 475 if (status < 0) 476 goto out; 477 478 checksum = (u16)(status & 0xffff); 479 480 /* Do not use hw->eeprom.ops.write because we do not want to 481 * take the synchronization semaphores twice here. 482 */ 483 status = ixgbe_write_eewr_generic(hw, IXGBE_EEPROM_CHECKSUM, checksum); 484 if (status) 485 goto out; 486 487 status = ixgbe_update_flash_X540(hw); 488 489 out: 490 hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_EEP_SM); 491 return status; 492 } 493 494 /** 495 * ixgbe_update_flash_X540 - Instruct HW to copy EEPROM to Flash device 496 * @hw: pointer to hardware structure 497 * 498 * Set FLUP (bit 23) of the EEC register to instruct Hardware to copy 499 * EEPROM from shadow RAM to the flash device. 500 **/ 501 static s32 ixgbe_update_flash_X540(struct ixgbe_hw *hw) 502 { 503 u32 flup; 504 s32 status; 505 506 status = ixgbe_poll_flash_update_done_X540(hw); 507 if (status == IXGBE_ERR_EEPROM) { 508 hw_dbg(hw, "Flash update time out\n"); 509 return status; 510 } 511 512 flup = IXGBE_READ_REG(hw, IXGBE_EEC(hw)) | IXGBE_EEC_FLUP; 513 IXGBE_WRITE_REG(hw, IXGBE_EEC(hw), flup); 514 515 status = ixgbe_poll_flash_update_done_X540(hw); 516 if (status == 0) 517 hw_dbg(hw, "Flash update complete\n"); 518 else 519 hw_dbg(hw, "Flash update time out\n"); 520 521 if (hw->revision_id == 0) { 522 flup = IXGBE_READ_REG(hw, IXGBE_EEC(hw)); 523 524 if (flup & IXGBE_EEC_SEC1VAL) { 525 flup |= IXGBE_EEC_FLUP; 526 IXGBE_WRITE_REG(hw, IXGBE_EEC(hw), flup); 527 } 528 529 status = ixgbe_poll_flash_update_done_X540(hw); 530 if (status == 0) 531 hw_dbg(hw, "Flash update complete\n"); 532 else 533 hw_dbg(hw, "Flash update time out\n"); 534 } 535 536 return status; 537 } 538 539 /** 540 * ixgbe_poll_flash_update_done_X540 - Poll flash update status 541 * @hw: pointer to hardware structure 542 * 543 * Polls the FLUDONE (bit 26) of the EEC Register to determine when the 544 * flash update is done. 545 **/ 546 static s32 ixgbe_poll_flash_update_done_X540(struct ixgbe_hw *hw) 547 { 548 u32 i; 549 u32 reg; 550 551 for (i = 0; i < IXGBE_FLUDONE_ATTEMPTS; i++) { 552 reg = IXGBE_READ_REG(hw, IXGBE_EEC(hw)); 553 if (reg & IXGBE_EEC_FLUDONE) 554 return 0; 555 udelay(5); 556 } 557 return IXGBE_ERR_EEPROM; 558 } 559 560 /** 561 * ixgbe_acquire_swfw_sync_X540 - Acquire SWFW semaphore 562 * @hw: pointer to hardware structure 563 * @mask: Mask to specify which semaphore to acquire 564 * 565 * Acquires the SWFW semaphore thought the SW_FW_SYNC register for 566 * the specified function (CSR, PHY0, PHY1, NVM, Flash) 567 **/ 568 s32 ixgbe_acquire_swfw_sync_X540(struct ixgbe_hw *hw, u32 mask) 569 { 570 u32 swfw_sync; 571 u32 swmask = mask; 572 u32 fwmask = mask << 5; 573 u32 hwmask = 0; 574 u32 timeout = 200; 575 u32 i; 576 577 if (swmask == IXGBE_GSSR_EEP_SM) 578 hwmask = IXGBE_GSSR_FLASH_SM; 579 580 for (i = 0; i < timeout; i++) { 581 /* 582 * SW NVM semaphore bit is used for access to all 583 * SW_FW_SYNC bits (not just NVM) 584 */ 585 if (ixgbe_get_swfw_sync_semaphore(hw)) 586 return IXGBE_ERR_SWFW_SYNC; 587 588 swfw_sync = IXGBE_READ_REG(hw, IXGBE_SWFW_SYNC(hw)); 589 if (!(swfw_sync & (fwmask | swmask | hwmask))) { 590 swfw_sync |= swmask; 591 IXGBE_WRITE_REG(hw, IXGBE_SWFW_SYNC(hw), swfw_sync); 592 ixgbe_release_swfw_sync_semaphore(hw); 593 break; 594 } else { 595 /* 596 * Firmware currently using resource (fwmask), 597 * hardware currently using resource (hwmask), 598 * or other software thread currently using 599 * resource (swmask) 600 */ 601 ixgbe_release_swfw_sync_semaphore(hw); 602 usleep_range(5000, 10000); 603 } 604 } 605 606 /* 607 * If the resource is not released by the FW/HW the SW can assume that 608 * the FW/HW malfunctions. In that case the SW should sets the 609 * SW bit(s) of the requested resource(s) while ignoring the 610 * corresponding FW/HW bits in the SW_FW_SYNC register. 611 */ 612 if (i >= timeout) { 613 swfw_sync = IXGBE_READ_REG(hw, IXGBE_SWFW_SYNC(hw)); 614 if (swfw_sync & (fwmask | hwmask)) { 615 if (ixgbe_get_swfw_sync_semaphore(hw)) 616 return IXGBE_ERR_SWFW_SYNC; 617 618 swfw_sync |= swmask; 619 IXGBE_WRITE_REG(hw, IXGBE_SWFW_SYNC(hw), swfw_sync); 620 ixgbe_release_swfw_sync_semaphore(hw); 621 } 622 } 623 624 usleep_range(5000, 10000); 625 return 0; 626 } 627 628 /** 629 * ixgbe_release_swfw_sync_X540 - Release SWFW semaphore 630 * @hw: pointer to hardware structure 631 * @mask: Mask to specify which semaphore to release 632 * 633 * Releases the SWFW semaphore through the SW_FW_SYNC register 634 * for the specified function (CSR, PHY0, PHY1, EVM, Flash) 635 **/ 636 void ixgbe_release_swfw_sync_X540(struct ixgbe_hw *hw, u32 mask) 637 { 638 u32 swfw_sync; 639 u32 swmask = mask; 640 641 ixgbe_get_swfw_sync_semaphore(hw); 642 643 swfw_sync = IXGBE_READ_REG(hw, IXGBE_SWFW_SYNC(hw)); 644 swfw_sync &= ~swmask; 645 IXGBE_WRITE_REG(hw, IXGBE_SWFW_SYNC(hw), swfw_sync); 646 647 ixgbe_release_swfw_sync_semaphore(hw); 648 usleep_range(5000, 10000); 649 } 650 651 /** 652 * ixgbe_get_swfw_sync_semaphore - Get hardware semaphore 653 * @hw: pointer to hardware structure 654 * 655 * Sets the hardware semaphores so SW/FW can gain control of shared resources 656 */ 657 static s32 ixgbe_get_swfw_sync_semaphore(struct ixgbe_hw *hw) 658 { 659 u32 timeout = 2000; 660 u32 i; 661 u32 swsm; 662 663 /* Get SMBI software semaphore between device drivers first */ 664 for (i = 0; i < timeout; i++) { 665 /* If the SMBI bit is 0 when we read it, then the bit will be 666 * set and we have the semaphore 667 */ 668 swsm = IXGBE_READ_REG(hw, IXGBE_SWSM(hw)); 669 if (!(swsm & IXGBE_SWSM_SMBI)) 670 break; 671 usleep_range(50, 100); 672 } 673 674 if (i == timeout) { 675 hw_dbg(hw, 676 "Software semaphore SMBI between device drivers not granted.\n"); 677 return IXGBE_ERR_EEPROM; 678 } 679 680 /* Now get the semaphore between SW/FW through the REGSMP bit */ 681 for (i = 0; i < timeout; i++) { 682 swsm = IXGBE_READ_REG(hw, IXGBE_SWFW_SYNC(hw)); 683 if (!(swsm & IXGBE_SWFW_REGSMP)) 684 return 0; 685 686 usleep_range(50, 100); 687 } 688 689 return IXGBE_ERR_EEPROM; 690 } 691 692 /** 693 * ixgbe_release_nvm_semaphore - Release hardware semaphore 694 * @hw: pointer to hardware structure 695 * 696 * This function clears hardware semaphore bits. 697 **/ 698 static void ixgbe_release_swfw_sync_semaphore(struct ixgbe_hw *hw) 699 { 700 u32 swsm; 701 702 /* Release both semaphores by writing 0 to the bits REGSMP and SMBI */ 703 704 swsm = IXGBE_READ_REG(hw, IXGBE_SWFW_SYNC(hw)); 705 swsm &= ~IXGBE_SWFW_REGSMP; 706 IXGBE_WRITE_REG(hw, IXGBE_SWFW_SYNC(hw), swsm); 707 708 swsm = IXGBE_READ_REG(hw, IXGBE_SWSM(hw)); 709 swsm &= ~IXGBE_SWSM_SMBI; 710 IXGBE_WRITE_REG(hw, IXGBE_SWSM(hw), swsm); 711 712 IXGBE_WRITE_FLUSH(hw); 713 } 714 715 /** 716 * ixgbe_blink_led_start_X540 - Blink LED based on index. 717 * @hw: pointer to hardware structure 718 * @index: led number to blink 719 * 720 * Devices that implement the version 2 interface: 721 * X540 722 **/ 723 s32 ixgbe_blink_led_start_X540(struct ixgbe_hw *hw, u32 index) 724 { 725 u32 macc_reg; 726 u32 ledctl_reg; 727 ixgbe_link_speed speed; 728 bool link_up; 729 730 /* 731 * Link should be up in order for the blink bit in the LED control 732 * register to work. Force link and speed in the MAC if link is down. 733 * This will be reversed when we stop the blinking. 734 */ 735 hw->mac.ops.check_link(hw, &speed, &link_up, false); 736 if (!link_up) { 737 macc_reg = IXGBE_READ_REG(hw, IXGBE_MACC); 738 macc_reg |= IXGBE_MACC_FLU | IXGBE_MACC_FSV_10G | IXGBE_MACC_FS; 739 IXGBE_WRITE_REG(hw, IXGBE_MACC, macc_reg); 740 } 741 /* Set the LED to LINK_UP + BLINK. */ 742 ledctl_reg = IXGBE_READ_REG(hw, IXGBE_LEDCTL); 743 ledctl_reg &= ~IXGBE_LED_MODE_MASK(index); 744 ledctl_reg |= IXGBE_LED_BLINK(index); 745 IXGBE_WRITE_REG(hw, IXGBE_LEDCTL, ledctl_reg); 746 IXGBE_WRITE_FLUSH(hw); 747 748 return 0; 749 } 750 751 /** 752 * ixgbe_blink_led_stop_X540 - Stop blinking LED based on index. 753 * @hw: pointer to hardware structure 754 * @index: led number to stop blinking 755 * 756 * Devices that implement the version 2 interface: 757 * X540 758 **/ 759 s32 ixgbe_blink_led_stop_X540(struct ixgbe_hw *hw, u32 index) 760 { 761 u32 macc_reg; 762 u32 ledctl_reg; 763 764 /* Restore the LED to its default value. */ 765 ledctl_reg = IXGBE_READ_REG(hw, IXGBE_LEDCTL); 766 ledctl_reg &= ~IXGBE_LED_MODE_MASK(index); 767 ledctl_reg |= IXGBE_LED_LINK_ACTIVE << IXGBE_LED_MODE_SHIFT(index); 768 ledctl_reg &= ~IXGBE_LED_BLINK(index); 769 IXGBE_WRITE_REG(hw, IXGBE_LEDCTL, ledctl_reg); 770 771 /* Unforce link and speed in the MAC. */ 772 macc_reg = IXGBE_READ_REG(hw, IXGBE_MACC); 773 macc_reg &= ~(IXGBE_MACC_FLU | IXGBE_MACC_FSV_10G | IXGBE_MACC_FS); 774 IXGBE_WRITE_REG(hw, IXGBE_MACC, macc_reg); 775 IXGBE_WRITE_FLUSH(hw); 776 777 return 0; 778 } 779 static struct ixgbe_mac_operations mac_ops_X540 = { 780 .init_hw = &ixgbe_init_hw_generic, 781 .reset_hw = &ixgbe_reset_hw_X540, 782 .start_hw = &ixgbe_start_hw_X540, 783 .clear_hw_cntrs = &ixgbe_clear_hw_cntrs_generic, 784 .get_media_type = &ixgbe_get_media_type_X540, 785 .enable_rx_dma = &ixgbe_enable_rx_dma_generic, 786 .get_mac_addr = &ixgbe_get_mac_addr_generic, 787 .get_san_mac_addr = &ixgbe_get_san_mac_addr_generic, 788 .get_device_caps = &ixgbe_get_device_caps_generic, 789 .get_wwn_prefix = &ixgbe_get_wwn_prefix_generic, 790 .stop_adapter = &ixgbe_stop_adapter_generic, 791 .get_bus_info = &ixgbe_get_bus_info_generic, 792 .set_lan_id = &ixgbe_set_lan_id_multi_port_pcie, 793 .read_analog_reg8 = NULL, 794 .write_analog_reg8 = NULL, 795 .setup_link = &ixgbe_setup_mac_link_X540, 796 .set_rxpba = &ixgbe_set_rxpba_generic, 797 .check_link = &ixgbe_check_mac_link_generic, 798 .get_link_capabilities = &ixgbe_get_copper_link_capabilities_generic, 799 .led_on = &ixgbe_led_on_generic, 800 .led_off = &ixgbe_led_off_generic, 801 .blink_led_start = &ixgbe_blink_led_start_X540, 802 .blink_led_stop = &ixgbe_blink_led_stop_X540, 803 .set_rar = &ixgbe_set_rar_generic, 804 .clear_rar = &ixgbe_clear_rar_generic, 805 .set_vmdq = &ixgbe_set_vmdq_generic, 806 .set_vmdq_san_mac = &ixgbe_set_vmdq_san_mac_generic, 807 .clear_vmdq = &ixgbe_clear_vmdq_generic, 808 .init_rx_addrs = &ixgbe_init_rx_addrs_generic, 809 .update_mc_addr_list = &ixgbe_update_mc_addr_list_generic, 810 .enable_mc = &ixgbe_enable_mc_generic, 811 .disable_mc = &ixgbe_disable_mc_generic, 812 .clear_vfta = &ixgbe_clear_vfta_generic, 813 .set_vfta = &ixgbe_set_vfta_generic, 814 .fc_enable = &ixgbe_fc_enable_generic, 815 .set_fw_drv_ver = &ixgbe_set_fw_drv_ver_generic, 816 .init_uta_tables = &ixgbe_init_uta_tables_generic, 817 .setup_sfp = NULL, 818 .set_mac_anti_spoofing = &ixgbe_set_mac_anti_spoofing, 819 .set_vlan_anti_spoofing = &ixgbe_set_vlan_anti_spoofing, 820 .acquire_swfw_sync = &ixgbe_acquire_swfw_sync_X540, 821 .release_swfw_sync = &ixgbe_release_swfw_sync_X540, 822 .disable_rx_buff = &ixgbe_disable_rx_buff_generic, 823 .enable_rx_buff = &ixgbe_enable_rx_buff_generic, 824 .get_thermal_sensor_data = NULL, 825 .init_thermal_sensor_thresh = NULL, 826 .prot_autoc_read = &prot_autoc_read_generic, 827 .prot_autoc_write = &prot_autoc_write_generic, 828 .enable_rx = &ixgbe_enable_rx_generic, 829 .disable_rx = &ixgbe_disable_rx_generic, 830 }; 831 832 static struct ixgbe_eeprom_operations eeprom_ops_X540 = { 833 .init_params = &ixgbe_init_eeprom_params_X540, 834 .read = &ixgbe_read_eerd_X540, 835 .read_buffer = &ixgbe_read_eerd_buffer_X540, 836 .write = &ixgbe_write_eewr_X540, 837 .write_buffer = &ixgbe_write_eewr_buffer_X540, 838 .calc_checksum = &ixgbe_calc_eeprom_checksum_X540, 839 .validate_checksum = &ixgbe_validate_eeprom_checksum_X540, 840 .update_checksum = &ixgbe_update_eeprom_checksum_X540, 841 }; 842 843 static struct ixgbe_phy_operations phy_ops_X540 = { 844 .identify = &ixgbe_identify_phy_generic, 845 .identify_sfp = &ixgbe_identify_sfp_module_generic, 846 .init = NULL, 847 .reset = NULL, 848 .read_reg = &ixgbe_read_phy_reg_generic, 849 .write_reg = &ixgbe_write_phy_reg_generic, 850 .setup_link = &ixgbe_setup_phy_link_generic, 851 .setup_link_speed = &ixgbe_setup_phy_link_speed_generic, 852 .read_i2c_byte = &ixgbe_read_i2c_byte_generic, 853 .write_i2c_byte = &ixgbe_write_i2c_byte_generic, 854 .read_i2c_sff8472 = &ixgbe_read_i2c_sff8472_generic, 855 .read_i2c_eeprom = &ixgbe_read_i2c_eeprom_generic, 856 .write_i2c_eeprom = &ixgbe_write_i2c_eeprom_generic, 857 .check_overtemp = &ixgbe_tn_check_overtemp, 858 .set_phy_power = &ixgbe_set_copper_phy_power, 859 .get_firmware_version = &ixgbe_get_phy_firmware_version_generic, 860 }; 861 862 static const u32 ixgbe_mvals_X540[IXGBE_MVALS_IDX_LIMIT] = { 863 IXGBE_MVALS_INIT(X540) 864 }; 865 866 struct ixgbe_info ixgbe_X540_info = { 867 .mac = ixgbe_mac_X540, 868 .get_invariants = &ixgbe_get_invariants_X540, 869 .mac_ops = &mac_ops_X540, 870 .eeprom_ops = &eeprom_ops_X540, 871 .phy_ops = &phy_ops_X540, 872 .mbx_ops = &mbx_ops_generic, 873 .mvals = ixgbe_mvals_X540, 874 }; 875