xref: /linux/drivers/mtd/ftl.c (revision cdb138080b78146d1cdadba9f5dadbeb97445b91)
1 /* This version ported to the Linux-MTD system by dwmw2@infradead.org
2  *
3  * Fixes: Arnaldo Carvalho de Melo <acme@conectiva.com.br>
4  * - fixes some leaks on failure in build_maps and ftl_notify_add, cleanups
5  *
6  * Based on:
7  */
8 /*======================================================================
9 
10     A Flash Translation Layer memory card driver
11 
12     This driver implements a disk-like block device driver with an
13     apparent block size of 512 bytes for flash memory cards.
14 
15     ftl_cs.c 1.62 2000/02/01 00:59:04
16 
17     The contents of this file are subject to the Mozilla Public
18     License Version 1.1 (the "License"); you may not use this file
19     except in compliance with the License. You may obtain a copy of
20     the License at http://www.mozilla.org/MPL/
21 
22     Software distributed under the License is distributed on an "AS
23     IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
24     implied. See the License for the specific language governing
25     rights and limitations under the License.
26 
27     The initial developer of the original code is David A. Hinds
28     <dahinds@users.sourceforge.net>.  Portions created by David A. Hinds
29     are Copyright © 1999 David A. Hinds.  All Rights Reserved.
30 
31     Alternatively, the contents of this file may be used under the
32     terms of the GNU General Public License version 2 (the "GPL"), in
33     which case the provisions of the GPL are applicable instead of the
34     above.  If you wish to allow the use of your version of this file
35     only under the terms of the GPL and not to allow others to use
36     your version of this file under the MPL, indicate your decision
37     by deleting the provisions above and replace them with the notice
38     and other provisions required by the GPL.  If you do not delete
39     the provisions above, a recipient may use your version of this
40     file under either the MPL or the GPL.
41 
42     LEGAL NOTE: The FTL format is patented by M-Systems.  They have
43     granted a license for its use with PCMCIA devices:
44 
45      "M-Systems grants a royalty-free, non-exclusive license under
46       any presently existing M-Systems intellectual property rights
47       necessary for the design and development of FTL-compatible
48       drivers, file systems and utilities using the data formats with
49       PCMCIA PC Cards as described in the PCMCIA Flash Translation
50       Layer (FTL) Specification."
51 
52     Use of the FTL format for non-PCMCIA applications may be an
53     infringement of these patents.  For additional information,
54     contact M-Systems (http://www.m-sys.com) directly.
55 
56 ======================================================================*/
57 #include <linux/mtd/blktrans.h>
58 #include <linux/module.h>
59 #include <linux/mtd/mtd.h>
60 /*#define PSYCHO_DEBUG */
61 
62 #include <linux/kernel.h>
63 #include <linux/ptrace.h>
64 #include <linux/slab.h>
65 #include <linux/string.h>
66 #include <linux/timer.h>
67 #include <linux/major.h>
68 #include <linux/fs.h>
69 #include <linux/init.h>
70 #include <linux/hdreg.h>
71 #include <linux/vmalloc.h>
72 #include <linux/blkpg.h>
73 #include <asm/uaccess.h>
74 
75 #include <linux/mtd/ftl.h>
76 
77 /*====================================================================*/
78 
79 /* Parameters that can be set with 'insmod' */
80 static int shuffle_freq = 50;
81 module_param(shuffle_freq, int, 0);
82 
83 /*====================================================================*/
84 
85 /* Major device # for FTL device */
86 #ifndef FTL_MAJOR
87 #define FTL_MAJOR	44
88 #endif
89 
90 
91 /*====================================================================*/
92 
93 /* Maximum number of separate memory devices we'll allow */
94 #define MAX_DEV		4
95 
96 /* Maximum number of regions per device */
97 #define MAX_REGION	4
98 
99 /* Maximum number of partitions in an FTL region */
100 #define PART_BITS	4
101 
102 /* Maximum number of outstanding erase requests per socket */
103 #define MAX_ERASE	8
104 
105 /* Sector size -- shouldn't need to change */
106 #define SECTOR_SIZE	512
107 
108 
109 /* Each memory region corresponds to a minor device */
110 typedef struct partition_t {
111     struct mtd_blktrans_dev mbd;
112     uint32_t		state;
113     uint32_t		*VirtualBlockMap;
114     uint32_t		*VirtualPageMap;
115     uint32_t		FreeTotal;
116     struct eun_info_t {
117 	uint32_t		Offset;
118 	uint32_t		EraseCount;
119 	uint32_t		Free;
120 	uint32_t		Deleted;
121     } *EUNInfo;
122     struct xfer_info_t {
123 	uint32_t		Offset;
124 	uint32_t		EraseCount;
125 	uint16_t		state;
126     } *XferInfo;
127     uint16_t		bam_index;
128     uint32_t		*bam_cache;
129     uint16_t		DataUnits;
130     uint32_t		BlocksPerUnit;
131     erase_unit_header_t	header;
132 } partition_t;
133 
134 /* Partition state flags */
135 #define FTL_FORMATTED	0x01
136 
137 /* Transfer unit states */
138 #define XFER_UNKNOWN	0x00
139 #define XFER_ERASING	0x01
140 #define XFER_ERASED	0x02
141 #define XFER_PREPARED	0x03
142 #define XFER_FAILED	0x04
143 
144 /*====================================================================*/
145 
146 
147 static void ftl_erase_callback(struct erase_info *done);
148 
149 
150 /*======================================================================
151 
152     Scan_header() checks to see if a memory region contains an FTL
153     partition.  build_maps() reads all the erase unit headers, builds
154     the erase unit map, and then builds the virtual page map.
155 
156 ======================================================================*/
157 
158 static int scan_header(partition_t *part)
159 {
160     erase_unit_header_t header;
161     loff_t offset, max_offset;
162     size_t ret;
163     int err;
164     part->header.FormattedSize = 0;
165     max_offset = (0x100000<part->mbd.mtd->size)?0x100000:part->mbd.mtd->size;
166     /* Search first megabyte for a valid FTL header */
167     for (offset = 0;
168 	 (offset + sizeof(header)) < max_offset;
169 	 offset += part->mbd.mtd->erasesize ? : 0x2000) {
170 
171 	err = part->mbd.mtd->read(part->mbd.mtd, offset, sizeof(header), &ret,
172 			      (unsigned char *)&header);
173 
174 	if (err)
175 	    return err;
176 
177 	if (strcmp(header.DataOrgTuple+3, "FTL100") == 0) break;
178     }
179 
180     if (offset == max_offset) {
181 	printk(KERN_NOTICE "ftl_cs: FTL header not found.\n");
182 	return -ENOENT;
183     }
184     if (header.BlockSize != 9 ||
185 	(header.EraseUnitSize < 10) || (header.EraseUnitSize > 31) ||
186 	(header.NumTransferUnits >= le16_to_cpu(header.NumEraseUnits))) {
187 	printk(KERN_NOTICE "ftl_cs: FTL header corrupt!\n");
188 	return -1;
189     }
190     if ((1 << header.EraseUnitSize) != part->mbd.mtd->erasesize) {
191 	printk(KERN_NOTICE "ftl: FTL EraseUnitSize %x != MTD erasesize %x\n",
192 	       1 << header.EraseUnitSize,part->mbd.mtd->erasesize);
193 	return -1;
194     }
195     part->header = header;
196     return 0;
197 }
198 
199 static int build_maps(partition_t *part)
200 {
201     erase_unit_header_t header;
202     uint16_t xvalid, xtrans, i;
203     unsigned blocks, j;
204     int hdr_ok, ret = -1;
205     ssize_t retval;
206     loff_t offset;
207 
208     /* Set up erase unit maps */
209     part->DataUnits = le16_to_cpu(part->header.NumEraseUnits) -
210 	part->header.NumTransferUnits;
211     part->EUNInfo = kmalloc(part->DataUnits * sizeof(struct eun_info_t),
212 			    GFP_KERNEL);
213     if (!part->EUNInfo)
214 	    goto out;
215     for (i = 0; i < part->DataUnits; i++)
216 	part->EUNInfo[i].Offset = 0xffffffff;
217     part->XferInfo =
218 	kmalloc(part->header.NumTransferUnits * sizeof(struct xfer_info_t),
219 		GFP_KERNEL);
220     if (!part->XferInfo)
221 	    goto out_EUNInfo;
222 
223     xvalid = xtrans = 0;
224     for (i = 0; i < le16_to_cpu(part->header.NumEraseUnits); i++) {
225 	offset = ((i + le16_to_cpu(part->header.FirstPhysicalEUN))
226 		      << part->header.EraseUnitSize);
227 	ret = part->mbd.mtd->read(part->mbd.mtd, offset, sizeof(header), &retval,
228 			      (unsigned char *)&header);
229 
230 	if (ret)
231 	    goto out_XferInfo;
232 
233 	ret = -1;
234 	/* Is this a transfer partition? */
235 	hdr_ok = (strcmp(header.DataOrgTuple+3, "FTL100") == 0);
236 	if (hdr_ok && (le16_to_cpu(header.LogicalEUN) < part->DataUnits) &&
237 	    (part->EUNInfo[le16_to_cpu(header.LogicalEUN)].Offset == 0xffffffff)) {
238 	    part->EUNInfo[le16_to_cpu(header.LogicalEUN)].Offset = offset;
239 	    part->EUNInfo[le16_to_cpu(header.LogicalEUN)].EraseCount =
240 		le32_to_cpu(header.EraseCount);
241 	    xvalid++;
242 	} else {
243 	    if (xtrans == part->header.NumTransferUnits) {
244 		printk(KERN_NOTICE "ftl_cs: format error: too many "
245 		       "transfer units!\n");
246 		goto out_XferInfo;
247 	    }
248 	    if (hdr_ok && (le16_to_cpu(header.LogicalEUN) == 0xffff)) {
249 		part->XferInfo[xtrans].state = XFER_PREPARED;
250 		part->XferInfo[xtrans].EraseCount = le32_to_cpu(header.EraseCount);
251 	    } else {
252 		part->XferInfo[xtrans].state = XFER_UNKNOWN;
253 		/* Pick anything reasonable for the erase count */
254 		part->XferInfo[xtrans].EraseCount =
255 		    le32_to_cpu(part->header.EraseCount);
256 	    }
257 	    part->XferInfo[xtrans].Offset = offset;
258 	    xtrans++;
259 	}
260     }
261     /* Check for format trouble */
262     header = part->header;
263     if ((xtrans != header.NumTransferUnits) ||
264 	(xvalid+xtrans != le16_to_cpu(header.NumEraseUnits))) {
265 	printk(KERN_NOTICE "ftl_cs: format error: erase units "
266 	       "don't add up!\n");
267 	goto out_XferInfo;
268     }
269 
270     /* Set up virtual page map */
271     blocks = le32_to_cpu(header.FormattedSize) >> header.BlockSize;
272     part->VirtualBlockMap = vmalloc(blocks * sizeof(uint32_t));
273     if (!part->VirtualBlockMap)
274 	    goto out_XferInfo;
275 
276     memset(part->VirtualBlockMap, 0xff, blocks * sizeof(uint32_t));
277     part->BlocksPerUnit = (1 << header.EraseUnitSize) >> header.BlockSize;
278 
279     part->bam_cache = kmalloc(part->BlocksPerUnit * sizeof(uint32_t),
280 			      GFP_KERNEL);
281     if (!part->bam_cache)
282 	    goto out_VirtualBlockMap;
283 
284     part->bam_index = 0xffff;
285     part->FreeTotal = 0;
286 
287     for (i = 0; i < part->DataUnits; i++) {
288 	part->EUNInfo[i].Free = 0;
289 	part->EUNInfo[i].Deleted = 0;
290 	offset = part->EUNInfo[i].Offset + le32_to_cpu(header.BAMOffset);
291 
292 	ret = part->mbd.mtd->read(part->mbd.mtd, offset,
293 			      part->BlocksPerUnit * sizeof(uint32_t), &retval,
294 			      (unsigned char *)part->bam_cache);
295 
296 	if (ret)
297 		goto out_bam_cache;
298 
299 	for (j = 0; j < part->BlocksPerUnit; j++) {
300 	    if (BLOCK_FREE(le32_to_cpu(part->bam_cache[j]))) {
301 		part->EUNInfo[i].Free++;
302 		part->FreeTotal++;
303 	    } else if ((BLOCK_TYPE(le32_to_cpu(part->bam_cache[j])) == BLOCK_DATA) &&
304 		     (BLOCK_NUMBER(le32_to_cpu(part->bam_cache[j])) < blocks))
305 		part->VirtualBlockMap[BLOCK_NUMBER(le32_to_cpu(part->bam_cache[j]))] =
306 		    (i << header.EraseUnitSize) + (j << header.BlockSize);
307 	    else if (BLOCK_DELETED(le32_to_cpu(part->bam_cache[j])))
308 		part->EUNInfo[i].Deleted++;
309 	}
310     }
311 
312     ret = 0;
313     goto out;
314 
315 out_bam_cache:
316     kfree(part->bam_cache);
317 out_VirtualBlockMap:
318     vfree(part->VirtualBlockMap);
319 out_XferInfo:
320     kfree(part->XferInfo);
321 out_EUNInfo:
322     kfree(part->EUNInfo);
323 out:
324     return ret;
325 } /* build_maps */
326 
327 /*======================================================================
328 
329     Erase_xfer() schedules an asynchronous erase operation for a
330     transfer unit.
331 
332 ======================================================================*/
333 
334 static int erase_xfer(partition_t *part,
335 		      uint16_t xfernum)
336 {
337     int ret;
338     struct xfer_info_t *xfer;
339     struct erase_info *erase;
340 
341     xfer = &part->XferInfo[xfernum];
342     DEBUG(1, "ftl_cs: erasing xfer unit at 0x%x\n", xfer->Offset);
343     xfer->state = XFER_ERASING;
344 
345     /* Is there a free erase slot? Always in MTD. */
346 
347 
348     erase=kmalloc(sizeof(struct erase_info), GFP_KERNEL);
349     if (!erase)
350             return -ENOMEM;
351 
352     erase->mtd = part->mbd.mtd;
353     erase->callback = ftl_erase_callback;
354     erase->addr = xfer->Offset;
355     erase->len = 1 << part->header.EraseUnitSize;
356     erase->priv = (u_long)part;
357 
358     ret = part->mbd.mtd->erase(part->mbd.mtd, erase);
359 
360     if (!ret)
361 	    xfer->EraseCount++;
362     else
363 	    kfree(erase);
364 
365     return ret;
366 } /* erase_xfer */
367 
368 /*======================================================================
369 
370     Prepare_xfer() takes a freshly erased transfer unit and gives
371     it an appropriate header.
372 
373 ======================================================================*/
374 
375 static void ftl_erase_callback(struct erase_info *erase)
376 {
377     partition_t *part;
378     struct xfer_info_t *xfer;
379     int i;
380 
381     /* Look up the transfer unit */
382     part = (partition_t *)(erase->priv);
383 
384     for (i = 0; i < part->header.NumTransferUnits; i++)
385 	if (part->XferInfo[i].Offset == erase->addr) break;
386 
387     if (i == part->header.NumTransferUnits) {
388 	printk(KERN_NOTICE "ftl_cs: internal error: "
389 	       "erase lookup failed!\n");
390 	return;
391     }
392 
393     xfer = &part->XferInfo[i];
394     if (erase->state == MTD_ERASE_DONE)
395 	xfer->state = XFER_ERASED;
396     else {
397 	xfer->state = XFER_FAILED;
398 	printk(KERN_NOTICE "ftl_cs: erase failed: state = %d\n",
399 	       erase->state);
400     }
401 
402     kfree(erase);
403 
404 } /* ftl_erase_callback */
405 
406 static int prepare_xfer(partition_t *part, int i)
407 {
408     erase_unit_header_t header;
409     struct xfer_info_t *xfer;
410     int nbam, ret;
411     uint32_t ctl;
412     ssize_t retlen;
413     loff_t offset;
414 
415     xfer = &part->XferInfo[i];
416     xfer->state = XFER_FAILED;
417 
418     DEBUG(1, "ftl_cs: preparing xfer unit at 0x%x\n", xfer->Offset);
419 
420     /* Write the transfer unit header */
421     header = part->header;
422     header.LogicalEUN = cpu_to_le16(0xffff);
423     header.EraseCount = cpu_to_le32(xfer->EraseCount);
424 
425     ret = part->mbd.mtd->write(part->mbd.mtd, xfer->Offset, sizeof(header),
426 			   &retlen, (u_char *)&header);
427 
428     if (ret) {
429 	return ret;
430     }
431 
432     /* Write the BAM stub */
433     nbam = (part->BlocksPerUnit * sizeof(uint32_t) +
434 	    le32_to_cpu(part->header.BAMOffset) + SECTOR_SIZE - 1) / SECTOR_SIZE;
435 
436     offset = xfer->Offset + le32_to_cpu(part->header.BAMOffset);
437     ctl = cpu_to_le32(BLOCK_CONTROL);
438 
439     for (i = 0; i < nbam; i++, offset += sizeof(uint32_t)) {
440 
441 	ret = part->mbd.mtd->write(part->mbd.mtd, offset, sizeof(uint32_t),
442 			       &retlen, (u_char *)&ctl);
443 
444 	if (ret)
445 	    return ret;
446     }
447     xfer->state = XFER_PREPARED;
448     return 0;
449 
450 } /* prepare_xfer */
451 
452 /*======================================================================
453 
454     Copy_erase_unit() takes a full erase block and a transfer unit,
455     copies everything to the transfer unit, then swaps the block
456     pointers.
457 
458     All data blocks are copied to the corresponding blocks in the
459     target unit, so the virtual block map does not need to be
460     updated.
461 
462 ======================================================================*/
463 
464 static int copy_erase_unit(partition_t *part, uint16_t srcunit,
465 			   uint16_t xferunit)
466 {
467     u_char buf[SECTOR_SIZE];
468     struct eun_info_t *eun;
469     struct xfer_info_t *xfer;
470     uint32_t src, dest, free, i;
471     uint16_t unit;
472     int ret;
473     ssize_t retlen;
474     loff_t offset;
475     uint16_t srcunitswap = cpu_to_le16(srcunit);
476 
477     eun = &part->EUNInfo[srcunit];
478     xfer = &part->XferInfo[xferunit];
479     DEBUG(2, "ftl_cs: copying block 0x%x to 0x%x\n",
480 	  eun->Offset, xfer->Offset);
481 
482 
483     /* Read current BAM */
484     if (part->bam_index != srcunit) {
485 
486 	offset = eun->Offset + le32_to_cpu(part->header.BAMOffset);
487 
488 	ret = part->mbd.mtd->read(part->mbd.mtd, offset,
489 			      part->BlocksPerUnit * sizeof(uint32_t),
490 			      &retlen, (u_char *) (part->bam_cache));
491 
492 	/* mark the cache bad, in case we get an error later */
493 	part->bam_index = 0xffff;
494 
495 	if (ret) {
496 	    printk( KERN_WARNING "ftl: Failed to read BAM cache in copy_erase_unit()!\n");
497 	    return ret;
498 	}
499     }
500 
501     /* Write the LogicalEUN for the transfer unit */
502     xfer->state = XFER_UNKNOWN;
503     offset = xfer->Offset + 20; /* Bad! */
504     unit = cpu_to_le16(0x7fff);
505 
506     ret = part->mbd.mtd->write(part->mbd.mtd, offset, sizeof(uint16_t),
507 			   &retlen, (u_char *) &unit);
508 
509     if (ret) {
510 	printk( KERN_WARNING "ftl: Failed to write back to BAM cache in copy_erase_unit()!\n");
511 	return ret;
512     }
513 
514     /* Copy all data blocks from source unit to transfer unit */
515     src = eun->Offset; dest = xfer->Offset;
516 
517     free = 0;
518     ret = 0;
519     for (i = 0; i < part->BlocksPerUnit; i++) {
520 	switch (BLOCK_TYPE(le32_to_cpu(part->bam_cache[i]))) {
521 	case BLOCK_CONTROL:
522 	    /* This gets updated later */
523 	    break;
524 	case BLOCK_DATA:
525 	case BLOCK_REPLACEMENT:
526 	    ret = part->mbd.mtd->read(part->mbd.mtd, src, SECTOR_SIZE,
527                         &retlen, (u_char *) buf);
528 	    if (ret) {
529 		printk(KERN_WARNING "ftl: Error reading old xfer unit in copy_erase_unit\n");
530 		return ret;
531             }
532 
533 
534 	    ret = part->mbd.mtd->write(part->mbd.mtd, dest, SECTOR_SIZE,
535                         &retlen, (u_char *) buf);
536 	    if (ret)  {
537 		printk(KERN_WARNING "ftl: Error writing new xfer unit in copy_erase_unit\n");
538 		return ret;
539             }
540 
541 	    break;
542 	default:
543 	    /* All other blocks must be free */
544 	    part->bam_cache[i] = cpu_to_le32(0xffffffff);
545 	    free++;
546 	    break;
547 	}
548 	src += SECTOR_SIZE;
549 	dest += SECTOR_SIZE;
550     }
551 
552     /* Write the BAM to the transfer unit */
553     ret = part->mbd.mtd->write(part->mbd.mtd, xfer->Offset + le32_to_cpu(part->header.BAMOffset),
554                     part->BlocksPerUnit * sizeof(int32_t), &retlen,
555 		    (u_char *)part->bam_cache);
556     if (ret) {
557 	printk( KERN_WARNING "ftl: Error writing BAM in copy_erase_unit\n");
558 	return ret;
559     }
560 
561 
562     /* All clear? Then update the LogicalEUN again */
563     ret = part->mbd.mtd->write(part->mbd.mtd, xfer->Offset + 20, sizeof(uint16_t),
564 			   &retlen, (u_char *)&srcunitswap);
565 
566     if (ret) {
567 	printk(KERN_WARNING "ftl: Error writing new LogicalEUN in copy_erase_unit\n");
568 	return ret;
569     }
570 
571 
572     /* Update the maps and usage stats*/
573     i = xfer->EraseCount;
574     xfer->EraseCount = eun->EraseCount;
575     eun->EraseCount = i;
576     i = xfer->Offset;
577     xfer->Offset = eun->Offset;
578     eun->Offset = i;
579     part->FreeTotal -= eun->Free;
580     part->FreeTotal += free;
581     eun->Free = free;
582     eun->Deleted = 0;
583 
584     /* Now, the cache should be valid for the new block */
585     part->bam_index = srcunit;
586 
587     return 0;
588 } /* copy_erase_unit */
589 
590 /*======================================================================
591 
592     reclaim_block() picks a full erase unit and a transfer unit and
593     then calls copy_erase_unit() to copy one to the other.  Then, it
594     schedules an erase on the expired block.
595 
596     What's a good way to decide which transfer unit and which erase
597     unit to use?  Beats me.  My way is to always pick the transfer
598     unit with the fewest erases, and usually pick the data unit with
599     the most deleted blocks.  But with a small probability, pick the
600     oldest data unit instead.  This means that we generally postpone
601     the next reclaimation as long as possible, but shuffle static
602     stuff around a bit for wear leveling.
603 
604 ======================================================================*/
605 
606 static int reclaim_block(partition_t *part)
607 {
608     uint16_t i, eun, xfer;
609     uint32_t best;
610     int queued, ret;
611 
612     DEBUG(0, "ftl_cs: reclaiming space...\n");
613     DEBUG(3, "NumTransferUnits == %x\n", part->header.NumTransferUnits);
614     /* Pick the least erased transfer unit */
615     best = 0xffffffff; xfer = 0xffff;
616     do {
617 	queued = 0;
618 	for (i = 0; i < part->header.NumTransferUnits; i++) {
619 	    int n=0;
620 	    if (part->XferInfo[i].state == XFER_UNKNOWN) {
621 		DEBUG(3,"XferInfo[%d].state == XFER_UNKNOWN\n",i);
622 		n=1;
623 		erase_xfer(part, i);
624 	    }
625 	    if (part->XferInfo[i].state == XFER_ERASING) {
626 		DEBUG(3,"XferInfo[%d].state == XFER_ERASING\n",i);
627 		n=1;
628 		queued = 1;
629 	    }
630 	    else if (part->XferInfo[i].state == XFER_ERASED) {
631 		DEBUG(3,"XferInfo[%d].state == XFER_ERASED\n",i);
632 		n=1;
633 		prepare_xfer(part, i);
634 	    }
635 	    if (part->XferInfo[i].state == XFER_PREPARED) {
636 		DEBUG(3,"XferInfo[%d].state == XFER_PREPARED\n",i);
637 		n=1;
638 		if (part->XferInfo[i].EraseCount <= best) {
639 		    best = part->XferInfo[i].EraseCount;
640 		    xfer = i;
641 		}
642 	    }
643 		if (!n)
644 		    DEBUG(3,"XferInfo[%d].state == %x\n",i, part->XferInfo[i].state);
645 
646 	}
647 	if (xfer == 0xffff) {
648 	    if (queued) {
649 		DEBUG(1, "ftl_cs: waiting for transfer "
650 		      "unit to be prepared...\n");
651 		if (part->mbd.mtd->sync)
652 			part->mbd.mtd->sync(part->mbd.mtd);
653 	    } else {
654 		static int ne = 0;
655 		if (++ne < 5)
656 		    printk(KERN_NOTICE "ftl_cs: reclaim failed: no "
657 			   "suitable transfer units!\n");
658 		else
659 		    DEBUG(1, "ftl_cs: reclaim failed: no "
660 			  "suitable transfer units!\n");
661 
662 		return -EIO;
663 	    }
664 	}
665     } while (xfer == 0xffff);
666 
667     eun = 0;
668     if ((jiffies % shuffle_freq) == 0) {
669 	DEBUG(1, "ftl_cs: recycling freshest block...\n");
670 	best = 0xffffffff;
671 	for (i = 0; i < part->DataUnits; i++)
672 	    if (part->EUNInfo[i].EraseCount <= best) {
673 		best = part->EUNInfo[i].EraseCount;
674 		eun = i;
675 	    }
676     } else {
677 	best = 0;
678 	for (i = 0; i < part->DataUnits; i++)
679 	    if (part->EUNInfo[i].Deleted >= best) {
680 		best = part->EUNInfo[i].Deleted;
681 		eun = i;
682 	    }
683 	if (best == 0) {
684 	    static int ne = 0;
685 	    if (++ne < 5)
686 		printk(KERN_NOTICE "ftl_cs: reclaim failed: "
687 		       "no free blocks!\n");
688 	    else
689 		DEBUG(1,"ftl_cs: reclaim failed: "
690 		       "no free blocks!\n");
691 
692 	    return -EIO;
693 	}
694     }
695     ret = copy_erase_unit(part, eun, xfer);
696     if (!ret)
697 	erase_xfer(part, xfer);
698     else
699 	printk(KERN_NOTICE "ftl_cs: copy_erase_unit failed!\n");
700     return ret;
701 } /* reclaim_block */
702 
703 /*======================================================================
704 
705     Find_free() searches for a free block.  If necessary, it updates
706     the BAM cache for the erase unit containing the free block.  It
707     returns the block index -- the erase unit is just the currently
708     cached unit.  If there are no free blocks, it returns 0 -- this
709     is never a valid data block because it contains the header.
710 
711 ======================================================================*/
712 
713 #ifdef PSYCHO_DEBUG
714 static void dump_lists(partition_t *part)
715 {
716     int i;
717     printk(KERN_DEBUG "ftl_cs: Free total = %d\n", part->FreeTotal);
718     for (i = 0; i < part->DataUnits; i++)
719 	printk(KERN_DEBUG "ftl_cs:   unit %d: %d phys, %d free, "
720 	       "%d deleted\n", i,
721 	       part->EUNInfo[i].Offset >> part->header.EraseUnitSize,
722 	       part->EUNInfo[i].Free, part->EUNInfo[i].Deleted);
723 }
724 #endif
725 
726 static uint32_t find_free(partition_t *part)
727 {
728     uint16_t stop, eun;
729     uint32_t blk;
730     size_t retlen;
731     int ret;
732 
733     /* Find an erase unit with some free space */
734     stop = (part->bam_index == 0xffff) ? 0 : part->bam_index;
735     eun = stop;
736     do {
737 	if (part->EUNInfo[eun].Free != 0) break;
738 	/* Wrap around at end of table */
739 	if (++eun == part->DataUnits) eun = 0;
740     } while (eun != stop);
741 
742     if (part->EUNInfo[eun].Free == 0)
743 	return 0;
744 
745     /* Is this unit's BAM cached? */
746     if (eun != part->bam_index) {
747 	/* Invalidate cache */
748 	part->bam_index = 0xffff;
749 
750 	ret = part->mbd.mtd->read(part->mbd.mtd,
751 		       part->EUNInfo[eun].Offset + le32_to_cpu(part->header.BAMOffset),
752 		       part->BlocksPerUnit * sizeof(uint32_t),
753 		       &retlen, (u_char *) (part->bam_cache));
754 
755 	if (ret) {
756 	    printk(KERN_WARNING"ftl: Error reading BAM in find_free\n");
757 	    return 0;
758 	}
759 	part->bam_index = eun;
760     }
761 
762     /* Find a free block */
763     for (blk = 0; blk < part->BlocksPerUnit; blk++)
764 	if (BLOCK_FREE(le32_to_cpu(part->bam_cache[blk]))) break;
765     if (blk == part->BlocksPerUnit) {
766 #ifdef PSYCHO_DEBUG
767 	static int ne = 0;
768 	if (++ne == 1)
769 	    dump_lists(part);
770 #endif
771 	printk(KERN_NOTICE "ftl_cs: bad free list!\n");
772 	return 0;
773     }
774     DEBUG(2, "ftl_cs: found free block at %d in %d\n", blk, eun);
775     return blk;
776 
777 } /* find_free */
778 
779 
780 /*======================================================================
781 
782     Read a series of sectors from an FTL partition.
783 
784 ======================================================================*/
785 
786 static int ftl_read(partition_t *part, caddr_t buffer,
787 		    u_long sector, u_long nblocks)
788 {
789     uint32_t log_addr, bsize;
790     u_long i;
791     int ret;
792     size_t offset, retlen;
793 
794     DEBUG(2, "ftl_cs: ftl_read(0x%p, 0x%lx, %ld)\n",
795 	  part, sector, nblocks);
796     if (!(part->state & FTL_FORMATTED)) {
797 	printk(KERN_NOTICE "ftl_cs: bad partition\n");
798 	return -EIO;
799     }
800     bsize = 1 << part->header.EraseUnitSize;
801 
802     for (i = 0; i < nblocks; i++) {
803 	if (((sector+i) * SECTOR_SIZE) >= le32_to_cpu(part->header.FormattedSize)) {
804 	    printk(KERN_NOTICE "ftl_cs: bad read offset\n");
805 	    return -EIO;
806 	}
807 	log_addr = part->VirtualBlockMap[sector+i];
808 	if (log_addr == 0xffffffff)
809 	    memset(buffer, 0, SECTOR_SIZE);
810 	else {
811 	    offset = (part->EUNInfo[log_addr / bsize].Offset
812 			  + (log_addr % bsize));
813 	    ret = part->mbd.mtd->read(part->mbd.mtd, offset, SECTOR_SIZE,
814 			   &retlen, (u_char *) buffer);
815 
816 	    if (ret) {
817 		printk(KERN_WARNING "Error reading MTD device in ftl_read()\n");
818 		return ret;
819 	    }
820 	}
821 	buffer += SECTOR_SIZE;
822     }
823     return 0;
824 } /* ftl_read */
825 
826 /*======================================================================
827 
828     Write a series of sectors to an FTL partition
829 
830 ======================================================================*/
831 
832 static int set_bam_entry(partition_t *part, uint32_t log_addr,
833 			 uint32_t virt_addr)
834 {
835     uint32_t bsize, blk, le_virt_addr;
836 #ifdef PSYCHO_DEBUG
837     uint32_t old_addr;
838 #endif
839     uint16_t eun;
840     int ret;
841     size_t retlen, offset;
842 
843     DEBUG(2, "ftl_cs: set_bam_entry(0x%p, 0x%x, 0x%x)\n",
844 	  part, log_addr, virt_addr);
845     bsize = 1 << part->header.EraseUnitSize;
846     eun = log_addr / bsize;
847     blk = (log_addr % bsize) / SECTOR_SIZE;
848     offset = (part->EUNInfo[eun].Offset + blk * sizeof(uint32_t) +
849 		  le32_to_cpu(part->header.BAMOffset));
850 
851 #ifdef PSYCHO_DEBUG
852     ret = part->mbd.mtd->read(part->mbd.mtd, offset, sizeof(uint32_t),
853                         &retlen, (u_char *)&old_addr);
854     if (ret) {
855 	printk(KERN_WARNING"ftl: Error reading old_addr in set_bam_entry: %d\n",ret);
856 	return ret;
857     }
858     old_addr = le32_to_cpu(old_addr);
859 
860     if (((virt_addr == 0xfffffffe) && !BLOCK_FREE(old_addr)) ||
861 	((virt_addr == 0) && (BLOCK_TYPE(old_addr) != BLOCK_DATA)) ||
862 	(!BLOCK_DELETED(virt_addr) && (old_addr != 0xfffffffe))) {
863 	static int ne = 0;
864 	if (++ne < 5) {
865 	    printk(KERN_NOTICE "ftl_cs: set_bam_entry() inconsistency!\n");
866 	    printk(KERN_NOTICE "ftl_cs:   log_addr = 0x%x, old = 0x%x"
867 		   ", new = 0x%x\n", log_addr, old_addr, virt_addr);
868 	}
869 	return -EIO;
870     }
871 #endif
872     le_virt_addr = cpu_to_le32(virt_addr);
873     if (part->bam_index == eun) {
874 #ifdef PSYCHO_DEBUG
875 	if (le32_to_cpu(part->bam_cache[blk]) != old_addr) {
876 	    static int ne = 0;
877 	    if (++ne < 5) {
878 		printk(KERN_NOTICE "ftl_cs: set_bam_entry() "
879 		       "inconsistency!\n");
880 		printk(KERN_NOTICE "ftl_cs:   log_addr = 0x%x, cache"
881 		       " = 0x%x\n",
882 		       le32_to_cpu(part->bam_cache[blk]), old_addr);
883 	    }
884 	    return -EIO;
885 	}
886 #endif
887 	part->bam_cache[blk] = le_virt_addr;
888     }
889     ret = part->mbd.mtd->write(part->mbd.mtd, offset, sizeof(uint32_t),
890                             &retlen, (u_char *)&le_virt_addr);
891 
892     if (ret) {
893 	printk(KERN_NOTICE "ftl_cs: set_bam_entry() failed!\n");
894 	printk(KERN_NOTICE "ftl_cs:   log_addr = 0x%x, new = 0x%x\n",
895 	       log_addr, virt_addr);
896     }
897     return ret;
898 } /* set_bam_entry */
899 
900 static int ftl_write(partition_t *part, caddr_t buffer,
901 		     u_long sector, u_long nblocks)
902 {
903     uint32_t bsize, log_addr, virt_addr, old_addr, blk;
904     u_long i;
905     int ret;
906     size_t retlen, offset;
907 
908     DEBUG(2, "ftl_cs: ftl_write(0x%p, %ld, %ld)\n",
909 	  part, sector, nblocks);
910     if (!(part->state & FTL_FORMATTED)) {
911 	printk(KERN_NOTICE "ftl_cs: bad partition\n");
912 	return -EIO;
913     }
914     /* See if we need to reclaim space, before we start */
915     while (part->FreeTotal < nblocks) {
916 	ret = reclaim_block(part);
917 	if (ret)
918 	    return ret;
919     }
920 
921     bsize = 1 << part->header.EraseUnitSize;
922 
923     virt_addr = sector * SECTOR_SIZE | BLOCK_DATA;
924     for (i = 0; i < nblocks; i++) {
925 	if (virt_addr >= le32_to_cpu(part->header.FormattedSize)) {
926 	    printk(KERN_NOTICE "ftl_cs: bad write offset\n");
927 	    return -EIO;
928 	}
929 
930 	/* Grab a free block */
931 	blk = find_free(part);
932 	if (blk == 0) {
933 	    static int ne = 0;
934 	    if (++ne < 5)
935 		printk(KERN_NOTICE "ftl_cs: internal error: "
936 		       "no free blocks!\n");
937 	    return -ENOSPC;
938 	}
939 
940 	/* Tag the BAM entry, and write the new block */
941 	log_addr = part->bam_index * bsize + blk * SECTOR_SIZE;
942 	part->EUNInfo[part->bam_index].Free--;
943 	part->FreeTotal--;
944 	if (set_bam_entry(part, log_addr, 0xfffffffe))
945 	    return -EIO;
946 	part->EUNInfo[part->bam_index].Deleted++;
947 	offset = (part->EUNInfo[part->bam_index].Offset +
948 		      blk * SECTOR_SIZE);
949 	ret = part->mbd.mtd->write(part->mbd.mtd, offset, SECTOR_SIZE, &retlen,
950                                      buffer);
951 
952 	if (ret) {
953 	    printk(KERN_NOTICE "ftl_cs: block write failed!\n");
954 	    printk(KERN_NOTICE "ftl_cs:   log_addr = 0x%x, virt_addr"
955 		   " = 0x%x, Offset = 0x%zx\n", log_addr, virt_addr,
956 		   offset);
957 	    return -EIO;
958 	}
959 
960 	/* Only delete the old entry when the new entry is ready */
961 	old_addr = part->VirtualBlockMap[sector+i];
962 	if (old_addr != 0xffffffff) {
963 	    part->VirtualBlockMap[sector+i] = 0xffffffff;
964 	    part->EUNInfo[old_addr/bsize].Deleted++;
965 	    if (set_bam_entry(part, old_addr, 0))
966 		return -EIO;
967 	}
968 
969 	/* Finally, set up the new pointers */
970 	if (set_bam_entry(part, log_addr, virt_addr))
971 	    return -EIO;
972 	part->VirtualBlockMap[sector+i] = log_addr;
973 	part->EUNInfo[part->bam_index].Deleted--;
974 
975 	buffer += SECTOR_SIZE;
976 	virt_addr += SECTOR_SIZE;
977     }
978     return 0;
979 } /* ftl_write */
980 
981 static int ftl_getgeo(struct mtd_blktrans_dev *dev, struct hd_geometry *geo)
982 {
983 	partition_t *part = (void *)dev;
984 	u_long sect;
985 
986 	/* Sort of arbitrary: round size down to 4KiB boundary */
987 	sect = le32_to_cpu(part->header.FormattedSize)/SECTOR_SIZE;
988 
989 	geo->heads = 1;
990 	geo->sectors = 8;
991 	geo->cylinders = sect >> 3;
992 
993 	return 0;
994 }
995 
996 static int ftl_readsect(struct mtd_blktrans_dev *dev,
997 			      unsigned long block, char *buf)
998 {
999 	return ftl_read((void *)dev, buf, block, 1);
1000 }
1001 
1002 static int ftl_writesect(struct mtd_blktrans_dev *dev,
1003 			      unsigned long block, char *buf)
1004 {
1005 	return ftl_write((void *)dev, buf, block, 1);
1006 }
1007 
1008 static int ftl_discardsect(struct mtd_blktrans_dev *dev,
1009 			   unsigned long sector, unsigned nr_sects)
1010 {
1011 	partition_t *part = (void *)dev;
1012 	uint32_t bsize = 1 << part->header.EraseUnitSize;
1013 
1014 	DEBUG(1, "FTL erase sector %ld for %d sectors\n",
1015 	      sector, nr_sects);
1016 
1017 	while (nr_sects) {
1018 		uint32_t old_addr = part->VirtualBlockMap[sector];
1019 		if (old_addr != 0xffffffff) {
1020 			part->VirtualBlockMap[sector] = 0xffffffff;
1021 			part->EUNInfo[old_addr/bsize].Deleted++;
1022 			if (set_bam_entry(part, old_addr, 0))
1023 				return -EIO;
1024 		}
1025 		nr_sects--;
1026 		sector++;
1027 	}
1028 
1029 	return 0;
1030 }
1031 /*====================================================================*/
1032 
1033 static void ftl_freepart(partition_t *part)
1034 {
1035 	vfree(part->VirtualBlockMap);
1036 	part->VirtualBlockMap = NULL;
1037 	kfree(part->VirtualPageMap);
1038 	part->VirtualPageMap = NULL;
1039 	kfree(part->EUNInfo);
1040 	part->EUNInfo = NULL;
1041 	kfree(part->XferInfo);
1042 	part->XferInfo = NULL;
1043 	kfree(part->bam_cache);
1044 	part->bam_cache = NULL;
1045 } /* ftl_freepart */
1046 
1047 static void ftl_add_mtd(struct mtd_blktrans_ops *tr, struct mtd_info *mtd)
1048 {
1049 	partition_t *partition;
1050 
1051 	partition = kzalloc(sizeof(partition_t), GFP_KERNEL);
1052 
1053 	if (!partition) {
1054 		printk(KERN_WARNING "No memory to scan for FTL on %s\n",
1055 		       mtd->name);
1056 		return;
1057 	}
1058 
1059 	partition->mbd.mtd = mtd;
1060 
1061 	if ((scan_header(partition) == 0) &&
1062 	    (build_maps(partition) == 0)) {
1063 
1064 		partition->state = FTL_FORMATTED;
1065 #ifdef PCMCIA_DEBUG
1066 		printk(KERN_INFO "ftl_cs: opening %d KiB FTL partition\n",
1067 		       le32_to_cpu(partition->header.FormattedSize) >> 10);
1068 #endif
1069 		partition->mbd.size = le32_to_cpu(partition->header.FormattedSize) >> 9;
1070 
1071 		partition->mbd.tr = tr;
1072 		partition->mbd.devnum = -1;
1073 		if (!add_mtd_blktrans_dev((void *)partition))
1074 			return;
1075 	}
1076 
1077 	ftl_freepart(partition);
1078 	kfree(partition);
1079 }
1080 
1081 static void ftl_remove_dev(struct mtd_blktrans_dev *dev)
1082 {
1083 	del_mtd_blktrans_dev(dev);
1084 	ftl_freepart((partition_t *)dev);
1085 }
1086 
1087 static struct mtd_blktrans_ops ftl_tr = {
1088 	.name		= "ftl",
1089 	.major		= FTL_MAJOR,
1090 	.part_bits	= PART_BITS,
1091 	.blksize 	= SECTOR_SIZE,
1092 	.readsect	= ftl_readsect,
1093 	.writesect	= ftl_writesect,
1094 	.discard	= ftl_discardsect,
1095 	.getgeo		= ftl_getgeo,
1096 	.add_mtd	= ftl_add_mtd,
1097 	.remove_dev	= ftl_remove_dev,
1098 	.owner		= THIS_MODULE,
1099 };
1100 
1101 static int __init init_ftl(void)
1102 {
1103 	return register_mtd_blktrans(&ftl_tr);
1104 }
1105 
1106 static void __exit cleanup_ftl(void)
1107 {
1108 	deregister_mtd_blktrans(&ftl_tr);
1109 }
1110 
1111 module_init(init_ftl);
1112 module_exit(cleanup_ftl);
1113 
1114 
1115 MODULE_LICENSE("Dual MPL/GPL");
1116 MODULE_AUTHOR("David Hinds <dahinds@users.sourceforge.net>");
1117 MODULE_DESCRIPTION("Support code for Flash Translation Layer, used on PCMCIA devices");
1118