xref: /linux/drivers/message/fusion/mptspi.c (revision 4413e16d9d21673bb5048a2e542f1aaa00015c2e)
1 /*
2  *  linux/drivers/message/fusion/mptspi.c
3  *      For use with LSI PCI chip/adapter(s)
4  *      running LSI Fusion MPT (Message Passing Technology) firmware.
5  *
6  *  Copyright (c) 1999-2008 LSI Corporation
7  *  (mailto:DL-MPTFusionLinux@lsi.com)
8  *
9  */
10 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
11 /*
12     This program is free software; you can redistribute it and/or modify
13     it under the terms of the GNU General Public License as published by
14     the Free Software Foundation; version 2 of the License.
15 
16     This program is distributed in the hope that it will be useful,
17     but WITHOUT ANY WARRANTY; without even the implied warranty of
18     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
19     GNU General Public License for more details.
20 
21     NO WARRANTY
22     THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR
23     CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT
24     LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT,
25     MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is
26     solely responsible for determining the appropriateness of using and
27     distributing the Program and assumes all risks associated with its
28     exercise of rights under this Agreement, including but not limited to
29     the risks and costs of program errors, damage to or loss of data,
30     programs or equipment, and unavailability or interruption of operations.
31 
32     DISCLAIMER OF LIABILITY
33     NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY
34     DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
35     DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND
36     ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
37     TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
38     USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED
39     HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES
40 
41     You should have received a copy of the GNU General Public License
42     along with this program; if not, write to the Free Software
43     Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
44 */
45 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
46 
47 #include <linux/module.h>
48 #include <linux/kernel.h>
49 #include <linux/slab.h>
50 #include <linux/init.h>
51 #include <linux/errno.h>
52 #include <linux/kdev_t.h>
53 #include <linux/blkdev.h>
54 #include <linux/delay.h>	/* for mdelay */
55 #include <linux/interrupt.h>	/* needed for in_interrupt() proto */
56 #include <linux/reboot.h>	/* notifier code */
57 #include <linux/workqueue.h>
58 #include <linux/raid_class.h>
59 
60 #include <scsi/scsi.h>
61 #include <scsi/scsi_cmnd.h>
62 #include <scsi/scsi_device.h>
63 #include <scsi/scsi_host.h>
64 #include <scsi/scsi_tcq.h>
65 #include <scsi/scsi_transport.h>
66 #include <scsi/scsi_transport_spi.h>
67 #include <scsi/scsi_dbg.h>
68 
69 #include "mptbase.h"
70 #include "mptscsih.h"
71 
72 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
73 #define my_NAME		"Fusion MPT SPI Host driver"
74 #define my_VERSION	MPT_LINUX_VERSION_COMMON
75 #define MYNAM		"mptspi"
76 
77 MODULE_AUTHOR(MODULEAUTHOR);
78 MODULE_DESCRIPTION(my_NAME);
79 MODULE_LICENSE("GPL");
80 MODULE_VERSION(my_VERSION);
81 
82 /* Command line args */
83 static int mpt_saf_te = MPTSCSIH_SAF_TE;
84 module_param(mpt_saf_te, int, 0);
85 MODULE_PARM_DESC(mpt_saf_te, " Force enabling SEP Processor: enable=1  (default=MPTSCSIH_SAF_TE=0)");
86 
87 static void mptspi_write_offset(struct scsi_target *, int);
88 static void mptspi_write_width(struct scsi_target *, int);
89 static int mptspi_write_spi_device_pg1(struct scsi_target *,
90 				       struct _CONFIG_PAGE_SCSI_DEVICE_1 *);
91 
92 static struct scsi_transport_template *mptspi_transport_template = NULL;
93 
94 static u8	mptspiDoneCtx = MPT_MAX_PROTOCOL_DRIVERS;
95 static u8	mptspiTaskCtx = MPT_MAX_PROTOCOL_DRIVERS;
96 static u8	mptspiInternalCtx = MPT_MAX_PROTOCOL_DRIVERS; /* Used only for internal commands */
97 
98 /**
99  * 	mptspi_setTargetNegoParms  - Update the target negotiation parameters
100  *	@hd: Pointer to a SCSI Host Structure
101  *	@target: per target private data
102  *	@sdev: SCSI device
103  *
104  * 	Update the target negotiation parameters based on the the Inquiry
105  *	data, adapter capabilities, and NVRAM settings.
106  **/
107 static void
108 mptspi_setTargetNegoParms(MPT_SCSI_HOST *hd, VirtTarget *target,
109 			    struct scsi_device *sdev)
110 {
111 	MPT_ADAPTER *ioc = hd->ioc;
112 	SpiCfgData *pspi_data = &ioc->spi_data;
113 	int  id = (int) target->id;
114 	int  nvram;
115 	u8 width = MPT_NARROW;
116 	u8 factor = MPT_ASYNC;
117 	u8 offset = 0;
118 	u8 nfactor;
119 	u8 noQas = 1;
120 
121 	target->negoFlags = pspi_data->noQas;
122 
123 	if (sdev->scsi_level < SCSI_2) {
124 		width = 0;
125 		factor = MPT_ULTRA2;
126 		offset = pspi_data->maxSyncOffset;
127 		target->tflags &= ~MPT_TARGET_FLAGS_Q_YES;
128 	} else {
129 		if (scsi_device_wide(sdev))
130 			width = 1;
131 
132 		if (scsi_device_sync(sdev)) {
133 			factor = pspi_data->minSyncFactor;
134 			if (!scsi_device_dt(sdev))
135 					factor = MPT_ULTRA2;
136 			else {
137 				if (!scsi_device_ius(sdev) &&
138 				    !scsi_device_qas(sdev))
139 					factor = MPT_ULTRA160;
140 				else {
141 					factor = MPT_ULTRA320;
142 					if (scsi_device_qas(sdev)) {
143 						ddvprintk(ioc,
144 						printk(MYIOC_s_DEBUG_FMT "Enabling QAS due to "
145 						"byte56=%02x on id=%d!\n", ioc->name,
146 						scsi_device_qas(sdev), id));
147 						noQas = 0;
148 					}
149 					if (sdev->type == TYPE_TAPE &&
150 					    scsi_device_ius(sdev))
151 						target->negoFlags |= MPT_TAPE_NEGO_IDP;
152 				}
153 			}
154 			offset = pspi_data->maxSyncOffset;
155 
156 			/* If RAID, never disable QAS
157 			 * else if non RAID, do not disable
158 			 *   QAS if bit 1 is set
159 			 * bit 1 QAS support, non-raid only
160 			 * bit 0 IU support
161 			 */
162 			if (target->raidVolume == 1)
163 				noQas = 0;
164 		} else {
165 			factor = MPT_ASYNC;
166 			offset = 0;
167 		}
168 	}
169 
170 	if (!sdev->tagged_supported)
171 		target->tflags &= ~MPT_TARGET_FLAGS_Q_YES;
172 
173 	/* Update tflags based on NVRAM settings. (SCSI only)
174 	 */
175 	if (pspi_data->nvram && (pspi_data->nvram[id] != MPT_HOST_NVRAM_INVALID)) {
176 		nvram = pspi_data->nvram[id];
177 		nfactor = (nvram & MPT_NVRAM_SYNC_MASK) >> 8;
178 
179 		if (width)
180 			width = nvram & MPT_NVRAM_WIDE_DISABLE ? 0 : 1;
181 
182 		if (offset > 0) {
183 			/* Ensure factor is set to the
184 			 * maximum of: adapter, nvram, inquiry
185 			 */
186 			if (nfactor) {
187 				if (nfactor < pspi_data->minSyncFactor )
188 					nfactor = pspi_data->minSyncFactor;
189 
190 				factor = max(factor, nfactor);
191 				if (factor == MPT_ASYNC)
192 					offset = 0;
193 			} else {
194 				offset = 0;
195 				factor = MPT_ASYNC;
196 		}
197 		} else {
198 			factor = MPT_ASYNC;
199 		}
200 	}
201 
202 	/* Make sure data is consistent
203 	 */
204 	if ((!width) && (factor < MPT_ULTRA2))
205 		factor = MPT_ULTRA2;
206 
207 	/* Save the data to the target structure.
208 	 */
209 	target->minSyncFactor = factor;
210 	target->maxOffset = offset;
211 	target->maxWidth = width;
212 
213 	spi_min_period(scsi_target(sdev)) = factor;
214 	spi_max_offset(scsi_target(sdev)) = offset;
215 	spi_max_width(scsi_target(sdev)) = width;
216 
217 	target->tflags |= MPT_TARGET_FLAGS_VALID_NEGO;
218 
219 	/* Disable unused features.
220 	 */
221 	if (!width)
222 		target->negoFlags |= MPT_TARGET_NO_NEGO_WIDE;
223 
224 	if (!offset)
225 		target->negoFlags |= MPT_TARGET_NO_NEGO_SYNC;
226 
227 	if ( factor > MPT_ULTRA320 )
228 		noQas = 0;
229 
230 	if (noQas && (pspi_data->noQas == 0)) {
231 		pspi_data->noQas |= MPT_TARGET_NO_NEGO_QAS;
232 		target->negoFlags |= MPT_TARGET_NO_NEGO_QAS;
233 
234 		/* Disable QAS in a mixed configuration case
235 		 */
236 
237 		ddvprintk(ioc, printk(MYIOC_s_DEBUG_FMT
238 			"Disabling QAS due to noQas=%02x on id=%d!\n", ioc->name, noQas, id));
239 	}
240 }
241 
242 /**
243  * 	mptspi_writeIOCPage4  - write IOC Page 4
244  *	@hd: Pointer to a SCSI Host Structure
245  *	@channel: channel number
246  *	@id: write IOC Page4 for this ID & Bus
247  *
248  *	Return: -EAGAIN if unable to obtain a Message Frame
249  *		or 0 if success.
250  *
251  *	Remark: We do not wait for a return, write pages sequentially.
252  **/
253 static int
254 mptspi_writeIOCPage4(MPT_SCSI_HOST *hd, u8 channel , u8 id)
255 {
256 	MPT_ADAPTER		*ioc = hd->ioc;
257 	Config_t		*pReq;
258 	IOCPage4_t		*IOCPage4Ptr;
259 	MPT_FRAME_HDR		*mf;
260 	dma_addr_t		 dataDma;
261 	u16			 req_idx;
262 	u32			 frameOffset;
263 	u32			 flagsLength;
264 	int			 ii;
265 
266 	/* Get a MF for this command.
267 	 */
268 	if ((mf = mpt_get_msg_frame(ioc->DoneCtx, ioc)) == NULL) {
269 		dfailprintk(ioc, printk(MYIOC_s_WARN_FMT
270 				"writeIOCPage4 : no msg frames!\n",ioc->name));
271 		return -EAGAIN;
272 	}
273 
274 	/* Set the request and the data pointers.
275 	 * Place data at end of MF.
276 	 */
277 	pReq = (Config_t *)mf;
278 
279 	req_idx = le16_to_cpu(mf->u.frame.hwhdr.msgctxu.fld.req_idx);
280 	frameOffset = ioc->req_sz - sizeof(IOCPage4_t);
281 
282 	/* Complete the request frame (same for all requests).
283 	 */
284 	pReq->Action = MPI_CONFIG_ACTION_PAGE_WRITE_CURRENT;
285 	pReq->Reserved = 0;
286 	pReq->ChainOffset = 0;
287 	pReq->Function = MPI_FUNCTION_CONFIG;
288 	pReq->ExtPageLength = 0;
289 	pReq->ExtPageType = 0;
290 	pReq->MsgFlags = 0;
291 	for (ii=0; ii < 8; ii++) {
292 		pReq->Reserved2[ii] = 0;
293 	}
294 
295 	IOCPage4Ptr = ioc->spi_data.pIocPg4;
296 	dataDma = ioc->spi_data.IocPg4_dma;
297 	ii = IOCPage4Ptr->ActiveSEP++;
298 	IOCPage4Ptr->SEP[ii].SEPTargetID = id;
299 	IOCPage4Ptr->SEP[ii].SEPBus = channel;
300 	pReq->Header = IOCPage4Ptr->Header;
301 	pReq->PageAddress = cpu_to_le32(id | (channel << 8 ));
302 
303 	/* Add a SGE to the config request.
304 	 */
305 	flagsLength = MPT_SGE_FLAGS_SSIMPLE_WRITE |
306 		(IOCPage4Ptr->Header.PageLength + ii) * 4;
307 
308 	ioc->add_sge((char *)&pReq->PageBufferSGE, flagsLength, dataDma);
309 
310 	ddvprintk(ioc, printk(MYIOC_s_DEBUG_FMT
311 		"writeIOCPage4: MaxSEP=%d ActiveSEP=%d id=%d bus=%d\n",
312 		ioc->name, IOCPage4Ptr->MaxSEP, IOCPage4Ptr->ActiveSEP, id, channel));
313 
314 	mpt_put_msg_frame(ioc->DoneCtx, ioc, mf);
315 
316 	return 0;
317 }
318 
319 /**
320  *	mptspi_initTarget - Target, LUN alloc/free functionality.
321  *	@hd: Pointer to MPT_SCSI_HOST structure
322  *	@vtarget: per target private data
323  *	@sdev: SCSI device
324  *
325  *	NOTE: It's only SAFE to call this routine if data points to
326  *	sane & valid STANDARD INQUIRY data!
327  *
328  *	Allocate and initialize memory for this target.
329  *	Save inquiry data.
330  *
331  **/
332 static void
333 mptspi_initTarget(MPT_SCSI_HOST *hd, VirtTarget *vtarget,
334 		    struct scsi_device *sdev)
335 {
336 
337 	/* Is LUN supported? If so, upper 2 bits will be 0
338 	* in first byte of inquiry data.
339 	*/
340 	if (sdev->inq_periph_qual != 0)
341 		return;
342 
343 	if (vtarget == NULL)
344 		return;
345 
346 	vtarget->type = sdev->type;
347 
348 	if ((sdev->type == TYPE_PROCESSOR) && (hd->ioc->spi_data.Saf_Te)) {
349 		/* Treat all Processors as SAF-TE if
350 		 * command line option is set */
351 		vtarget->tflags |= MPT_TARGET_FLAGS_SAF_TE_ISSUED;
352 		mptspi_writeIOCPage4(hd, vtarget->channel, vtarget->id);
353 	}else if ((sdev->type == TYPE_PROCESSOR) &&
354 		!(vtarget->tflags & MPT_TARGET_FLAGS_SAF_TE_ISSUED )) {
355 		if (sdev->inquiry_len > 49 ) {
356 			if (sdev->inquiry[44] == 'S' &&
357 			    sdev->inquiry[45] == 'A' &&
358 			    sdev->inquiry[46] == 'F' &&
359 			    sdev->inquiry[47] == '-' &&
360 			    sdev->inquiry[48] == 'T' &&
361 			    sdev->inquiry[49] == 'E' ) {
362 				vtarget->tflags |= MPT_TARGET_FLAGS_SAF_TE_ISSUED;
363 				mptspi_writeIOCPage4(hd, vtarget->channel, vtarget->id);
364 			}
365 		}
366 	}
367 	mptspi_setTargetNegoParms(hd, vtarget, sdev);
368 }
369 
370 /**
371  *	mptspi_is_raid - Determines whether target is belonging to volume
372  *	@hd: Pointer to a SCSI HOST structure
373  *	@id: target device id
374  *
375  *	Return:
376  *		non-zero = true
377  *		zero = false
378  *
379  */
380 static int
381 mptspi_is_raid(struct _MPT_SCSI_HOST *hd, u32 id)
382 {
383 	int i, rc = 0;
384 	MPT_ADAPTER *ioc = hd->ioc;
385 
386 	if (!ioc->raid_data.pIocPg2)
387 		goto out;
388 
389 	if (!ioc->raid_data.pIocPg2->NumActiveVolumes)
390 		goto out;
391 	for (i=0; i < ioc->raid_data.pIocPg2->NumActiveVolumes; i++) {
392 		if (ioc->raid_data.pIocPg2->RaidVolume[i].VolumeID == id) {
393 			rc = 1;
394 			goto out;
395 		}
396 	}
397 
398  out:
399 	return rc;
400 }
401 
402 static int mptspi_target_alloc(struct scsi_target *starget)
403 {
404 	struct Scsi_Host *shost = dev_to_shost(&starget->dev);
405 	struct _MPT_SCSI_HOST *hd = shost_priv(shost);
406 	VirtTarget		*vtarget;
407 	MPT_ADAPTER *ioc;
408 
409 	if (hd == NULL)
410 		return -ENODEV;
411 
412 	ioc = hd->ioc;
413 	vtarget = kzalloc(sizeof(VirtTarget), GFP_KERNEL);
414 	if (!vtarget)
415 		return -ENOMEM;
416 
417 	vtarget->ioc_id = ioc->id;
418 	vtarget->tflags = MPT_TARGET_FLAGS_Q_YES;
419 	vtarget->id = (u8)starget->id;
420 	vtarget->channel = (u8)starget->channel;
421 	vtarget->starget = starget;
422 	starget->hostdata = vtarget;
423 
424 	if (starget->channel == 1) {
425 		if (mptscsih_is_phys_disk(ioc, 0, starget->id) == 0)
426 			return 0;
427 		vtarget->tflags |= MPT_TARGET_FLAGS_RAID_COMPONENT;
428 		/* The real channel for this device is zero */
429 		vtarget->channel = 0;
430 		/* The actual physdisknum (for RAID passthrough) */
431 		vtarget->id = mptscsih_raid_id_to_num(ioc, 0,
432 		    starget->id);
433 	}
434 
435 	if (starget->channel == 0 &&
436 	    mptspi_is_raid(hd, starget->id)) {
437 		vtarget->raidVolume = 1;
438 		ddvprintk(ioc, printk(MYIOC_s_DEBUG_FMT
439 		    "RAID Volume @ channel=%d id=%d\n", ioc->name, starget->channel,
440 		    starget->id));
441 	}
442 
443 	if (ioc->spi_data.nvram &&
444 	    ioc->spi_data.nvram[starget->id] != MPT_HOST_NVRAM_INVALID) {
445 		u32 nvram = ioc->spi_data.nvram[starget->id];
446 		spi_min_period(starget) = (nvram & MPT_NVRAM_SYNC_MASK) >> MPT_NVRAM_SYNC_SHIFT;
447 		spi_max_width(starget) = nvram & MPT_NVRAM_WIDE_DISABLE ? 0 : 1;
448 	} else {
449 		spi_min_period(starget) = ioc->spi_data.minSyncFactor;
450 		spi_max_width(starget) = ioc->spi_data.maxBusWidth;
451 	}
452 	spi_max_offset(starget) = ioc->spi_data.maxSyncOffset;
453 
454 	spi_offset(starget) = 0;
455 	spi_period(starget) = 0xFF;
456 	mptspi_write_width(starget, 0);
457 
458 	return 0;
459 }
460 
461 static void
462 mptspi_target_destroy(struct scsi_target *starget)
463 {
464 	if (starget->hostdata)
465 		kfree(starget->hostdata);
466 	starget->hostdata = NULL;
467 }
468 
469 /**
470  *	mptspi_print_write_nego - negotiation parameters debug info that is being sent
471  *	@hd: Pointer to a SCSI HOST structure
472  *	@starget: SCSI target
473  *	@ii: negotiation parameters
474  *
475  */
476 static void
477 mptspi_print_write_nego(struct _MPT_SCSI_HOST *hd, struct scsi_target *starget, u32 ii)
478 {
479 	ddvprintk(hd->ioc, printk(MYIOC_s_DEBUG_FMT "id=%d Requested = 0x%08x"
480 	    " ( %s factor = 0x%02x @ offset = 0x%02x %s%s%s%s%s%s%s%s)\n",
481 	    hd->ioc->name, starget->id, ii,
482 	    ii & MPI_SCSIDEVPAGE0_NP_WIDE ? "Wide ": "",
483 	    ((ii >> 8) & 0xFF), ((ii >> 16) & 0xFF),
484 	    ii & MPI_SCSIDEVPAGE0_NP_IU ? "IU ": "",
485 	    ii & MPI_SCSIDEVPAGE0_NP_DT ? "DT ": "",
486 	    ii & MPI_SCSIDEVPAGE0_NP_QAS ? "QAS ": "",
487 	    ii & MPI_SCSIDEVPAGE0_NP_HOLD_MCS ? "HOLDMCS ": "",
488 	    ii & MPI_SCSIDEVPAGE0_NP_WR_FLOW ? "WRFLOW ": "",
489 	    ii & MPI_SCSIDEVPAGE0_NP_RD_STRM ? "RDSTRM ": "",
490 	    ii & MPI_SCSIDEVPAGE0_NP_RTI ? "RTI ": "",
491 	    ii & MPI_SCSIDEVPAGE0_NP_PCOMP_EN ? "PCOMP ": ""));
492 }
493 
494 /**
495  *	mptspi_print_read_nego - negotiation parameters debug info that is being read
496  *	@hd: Pointer to a SCSI HOST structure
497  *	@starget: SCSI target
498  *	@ii: negotiation parameters
499  *
500  */
501 static void
502 mptspi_print_read_nego(struct _MPT_SCSI_HOST *hd, struct scsi_target *starget, u32 ii)
503 {
504 	ddvprintk(hd->ioc, printk(MYIOC_s_DEBUG_FMT "id=%d Read = 0x%08x"
505 	    " ( %s factor = 0x%02x @ offset = 0x%02x %s%s%s%s%s%s%s%s)\n",
506 	    hd->ioc->name, starget->id, ii,
507 	    ii & MPI_SCSIDEVPAGE0_NP_WIDE ? "Wide ": "",
508 	    ((ii >> 8) & 0xFF), ((ii >> 16) & 0xFF),
509 	    ii & MPI_SCSIDEVPAGE0_NP_IU ? "IU ": "",
510 	    ii & MPI_SCSIDEVPAGE0_NP_DT ? "DT ": "",
511 	    ii & MPI_SCSIDEVPAGE0_NP_QAS ? "QAS ": "",
512 	    ii & MPI_SCSIDEVPAGE0_NP_HOLD_MCS ? "HOLDMCS ": "",
513 	    ii & MPI_SCSIDEVPAGE0_NP_WR_FLOW ? "WRFLOW ": "",
514 	    ii & MPI_SCSIDEVPAGE0_NP_RD_STRM ? "RDSTRM ": "",
515 	    ii & MPI_SCSIDEVPAGE0_NP_RTI ? "RTI ": "",
516 	    ii & MPI_SCSIDEVPAGE0_NP_PCOMP_EN ? "PCOMP ": ""));
517 }
518 
519 static int mptspi_read_spi_device_pg0(struct scsi_target *starget,
520 			     struct _CONFIG_PAGE_SCSI_DEVICE_0 *pass_pg0)
521 {
522 	struct Scsi_Host *shost = dev_to_shost(&starget->dev);
523 	struct _MPT_SCSI_HOST *hd = shost_priv(shost);
524 	struct _MPT_ADAPTER *ioc = hd->ioc;
525 	struct _CONFIG_PAGE_SCSI_DEVICE_0 *spi_dev_pg0;
526 	dma_addr_t spi_dev_pg0_dma;
527 	int size;
528 	struct _x_config_parms cfg;
529 	struct _CONFIG_PAGE_HEADER hdr;
530 	int err = -EBUSY;
531 
532 	/* No SPI parameters for RAID devices */
533 	if (starget->channel == 0 &&
534 	    mptspi_is_raid(hd, starget->id))
535 		return -1;
536 
537 	size = ioc->spi_data.sdp0length * 4;
538 	/*
539 	if (ioc->spi_data.sdp0length & 1)
540 		size += size + 4;
541 	size += 2048;
542 	*/
543 
544 	spi_dev_pg0 = dma_alloc_coherent(&ioc->pcidev->dev, size, &spi_dev_pg0_dma, GFP_KERNEL);
545 	if (spi_dev_pg0 == NULL) {
546 		starget_printk(KERN_ERR, starget, MYIOC_s_FMT
547 		    "dma_alloc_coherent for parameters failed\n", ioc->name);
548 		return -EINVAL;
549 	}
550 
551 	memset(&hdr, 0, sizeof(hdr));
552 
553 	hdr.PageVersion = ioc->spi_data.sdp0version;
554 	hdr.PageLength = ioc->spi_data.sdp0length;
555 	hdr.PageNumber = 0;
556 	hdr.PageType = MPI_CONFIG_PAGETYPE_SCSI_DEVICE;
557 
558 	memset(&cfg, 0, sizeof(cfg));
559 
560 	cfg.cfghdr.hdr = &hdr;
561 	cfg.physAddr = spi_dev_pg0_dma;
562 	cfg.action = MPI_CONFIG_ACTION_PAGE_READ_CURRENT;
563 	cfg.dir = 0;
564 	cfg.pageAddr = starget->id;
565 	cfg.timeout = 60;
566 
567 	if (mpt_config(ioc, &cfg)) {
568 		starget_printk(KERN_ERR, starget, MYIOC_s_FMT "mpt_config failed\n", ioc->name);
569 		goto out_free;
570 	}
571 	err = 0;
572 	memcpy(pass_pg0, spi_dev_pg0, size);
573 
574 	mptspi_print_read_nego(hd, starget, le32_to_cpu(spi_dev_pg0->NegotiatedParameters));
575 
576  out_free:
577 	dma_free_coherent(&ioc->pcidev->dev, size, spi_dev_pg0, spi_dev_pg0_dma);
578 	return err;
579 }
580 
581 static u32 mptspi_getRP(struct scsi_target *starget)
582 {
583 	u32 nego = 0;
584 
585 	nego |= spi_iu(starget) ? MPI_SCSIDEVPAGE1_RP_IU : 0;
586 	nego |= spi_dt(starget) ? MPI_SCSIDEVPAGE1_RP_DT : 0;
587 	nego |= spi_qas(starget) ? MPI_SCSIDEVPAGE1_RP_QAS : 0;
588 	nego |= spi_hold_mcs(starget) ? MPI_SCSIDEVPAGE1_RP_HOLD_MCS : 0;
589 	nego |= spi_wr_flow(starget) ? MPI_SCSIDEVPAGE1_RP_WR_FLOW : 0;
590 	nego |= spi_rd_strm(starget) ? MPI_SCSIDEVPAGE1_RP_RD_STRM : 0;
591 	nego |= spi_rti(starget) ? MPI_SCSIDEVPAGE1_RP_RTI : 0;
592 	nego |= spi_pcomp_en(starget) ? MPI_SCSIDEVPAGE1_RP_PCOMP_EN : 0;
593 
594 	nego |= (spi_period(starget) <<  MPI_SCSIDEVPAGE1_RP_SHIFT_MIN_SYNC_PERIOD) & MPI_SCSIDEVPAGE1_RP_MIN_SYNC_PERIOD_MASK;
595 	nego |= (spi_offset(starget) << MPI_SCSIDEVPAGE1_RP_SHIFT_MAX_SYNC_OFFSET) & MPI_SCSIDEVPAGE1_RP_MAX_SYNC_OFFSET_MASK;
596 	nego |= spi_width(starget) ?  MPI_SCSIDEVPAGE1_RP_WIDE : 0;
597 
598 	return nego;
599 }
600 
601 static void mptspi_read_parameters(struct scsi_target *starget)
602 {
603 	int nego;
604 	struct _CONFIG_PAGE_SCSI_DEVICE_0 spi_dev_pg0;
605 
606 	mptspi_read_spi_device_pg0(starget, &spi_dev_pg0);
607 
608 	nego = le32_to_cpu(spi_dev_pg0.NegotiatedParameters);
609 
610 	spi_iu(starget) = (nego & MPI_SCSIDEVPAGE0_NP_IU) ? 1 : 0;
611 	spi_dt(starget) = (nego & MPI_SCSIDEVPAGE0_NP_DT) ? 1 : 0;
612 	spi_qas(starget) = (nego & MPI_SCSIDEVPAGE0_NP_QAS) ? 1 : 0;
613 	spi_wr_flow(starget) = (nego & MPI_SCSIDEVPAGE0_NP_WR_FLOW) ? 1 : 0;
614 	spi_rd_strm(starget) = (nego & MPI_SCSIDEVPAGE0_NP_RD_STRM) ? 1 : 0;
615 	spi_rti(starget) = (nego & MPI_SCSIDEVPAGE0_NP_RTI) ? 1 : 0;
616 	spi_pcomp_en(starget) = (nego & MPI_SCSIDEVPAGE0_NP_PCOMP_EN) ? 1 : 0;
617 	spi_hold_mcs(starget) = (nego & MPI_SCSIDEVPAGE0_NP_HOLD_MCS) ? 1 : 0;
618 	spi_period(starget) = (nego & MPI_SCSIDEVPAGE0_NP_NEG_SYNC_PERIOD_MASK) >> MPI_SCSIDEVPAGE0_NP_SHIFT_SYNC_PERIOD;
619 	spi_offset(starget) = (nego & MPI_SCSIDEVPAGE0_NP_NEG_SYNC_OFFSET_MASK) >> MPI_SCSIDEVPAGE0_NP_SHIFT_SYNC_OFFSET;
620 	spi_width(starget) = (nego & MPI_SCSIDEVPAGE0_NP_WIDE) ? 1 : 0;
621 }
622 
623 int
624 mptscsih_quiesce_raid(MPT_SCSI_HOST *hd, int quiesce, u8 channel, u8 id)
625 {
626 	MPT_ADAPTER	*ioc = hd->ioc;
627 	MpiRaidActionRequest_t	*pReq;
628 	MPT_FRAME_HDR		*mf;
629 	int			ret;
630 	unsigned long 	 	timeleft;
631 
632 	mutex_lock(&ioc->internal_cmds.mutex);
633 
634 	/* Get and Populate a free Frame
635 	 */
636 	if ((mf = mpt_get_msg_frame(ioc->InternalCtx, ioc)) == NULL) {
637 		dfailprintk(hd->ioc, printk(MYIOC_s_WARN_FMT
638 			"%s: no msg frames!\n", ioc->name, __func__));
639 		ret = -EAGAIN;
640 		goto out;
641 	}
642 	pReq = (MpiRaidActionRequest_t *)mf;
643 	if (quiesce)
644 		pReq->Action = MPI_RAID_ACTION_QUIESCE_PHYS_IO;
645 	else
646 		pReq->Action = MPI_RAID_ACTION_ENABLE_PHYS_IO;
647 	pReq->Reserved1 = 0;
648 	pReq->ChainOffset = 0;
649 	pReq->Function = MPI_FUNCTION_RAID_ACTION;
650 	pReq->VolumeID = id;
651 	pReq->VolumeBus = channel;
652 	pReq->PhysDiskNum = 0;
653 	pReq->MsgFlags = 0;
654 	pReq->Reserved2 = 0;
655 	pReq->ActionDataWord = 0; /* Reserved for this action */
656 
657 	ioc->add_sge((char *)&pReq->ActionDataSGE,
658 		MPT_SGE_FLAGS_SSIMPLE_READ | 0, (dma_addr_t) -1);
659 
660 	ddvprintk(ioc, printk(MYIOC_s_DEBUG_FMT "RAID Volume action=%x channel=%d id=%d\n",
661 			ioc->name, pReq->Action, channel, id));
662 
663 	INITIALIZE_MGMT_STATUS(ioc->internal_cmds.status)
664 	mpt_put_msg_frame(ioc->InternalCtx, ioc, mf);
665 	timeleft = wait_for_completion_timeout(&ioc->internal_cmds.done, 10*HZ);
666 	if (!(ioc->internal_cmds.status & MPT_MGMT_STATUS_COMMAND_GOOD)) {
667 		ret = -ETIME;
668 		dfailprintk(ioc, printk(MYIOC_s_DEBUG_FMT "%s: TIMED OUT!\n",
669 		    ioc->name, __func__));
670 		if (ioc->internal_cmds.status & MPT_MGMT_STATUS_DID_IOCRESET)
671 			goto out;
672 		if (!timeleft) {
673 			printk(MYIOC_s_WARN_FMT "Issuing Reset from %s!!\n",
674 			    ioc->name, __func__);
675 			mpt_HardResetHandler(ioc, CAN_SLEEP);
676 			mpt_free_msg_frame(ioc, mf);
677 		}
678 		goto out;
679 	}
680 
681 	ret = ioc->internal_cmds.completion_code;
682 
683  out:
684 	CLEAR_MGMT_STATUS(ioc->internal_cmds.status)
685 	mutex_unlock(&ioc->internal_cmds.mutex);
686 	return ret;
687 }
688 
689 static void mptspi_dv_device(struct _MPT_SCSI_HOST *hd,
690 			     struct scsi_device *sdev)
691 {
692 	VirtTarget *vtarget = scsi_target(sdev)->hostdata;
693 	MPT_ADAPTER *ioc = hd->ioc;
694 
695 	/* no DV on RAID devices */
696 	if (sdev->channel == 0 &&
697 	    mptspi_is_raid(hd, sdev->id))
698 		return;
699 
700 	/* If this is a piece of a RAID, then quiesce first */
701 	if (sdev->channel == 1 &&
702 	    mptscsih_quiesce_raid(hd, 1, vtarget->channel, vtarget->id) < 0) {
703 		starget_printk(KERN_ERR, scsi_target(sdev), MYIOC_s_FMT
704 		    "Integrated RAID quiesce failed\n", ioc->name);
705 		return;
706 	}
707 
708 	hd->spi_pending |= (1 << sdev->id);
709 	spi_dv_device(sdev);
710 	hd->spi_pending &= ~(1 << sdev->id);
711 
712 	if (sdev->channel == 1 &&
713 	    mptscsih_quiesce_raid(hd, 0, vtarget->channel, vtarget->id) < 0)
714 		starget_printk(KERN_ERR, scsi_target(sdev), MYIOC_s_FMT
715 		    "Integrated RAID resume failed\n", ioc->name);
716 
717 	mptspi_read_parameters(sdev->sdev_target);
718 	spi_display_xfer_agreement(sdev->sdev_target);
719 	mptspi_read_parameters(sdev->sdev_target);
720 }
721 
722 static int mptspi_slave_alloc(struct scsi_device *sdev)
723 {
724 	MPT_SCSI_HOST *hd = shost_priv(sdev->host);
725 	VirtTarget		*vtarget;
726 	VirtDevice		*vdevice;
727 	struct scsi_target 	*starget;
728 	MPT_ADAPTER *ioc = hd->ioc;
729 
730 	if (sdev->channel == 1 &&
731 		mptscsih_is_phys_disk(ioc, 0, sdev->id) == 0)
732 			return -ENXIO;
733 
734 	vdevice = kzalloc(sizeof(VirtDevice), GFP_KERNEL);
735 	if (!vdevice) {
736 		printk(MYIOC_s_ERR_FMT "slave_alloc kmalloc(%zd) FAILED!\n",
737 				ioc->name, sizeof(VirtDevice));
738 		return -ENOMEM;
739 	}
740 
741 	vdevice->lun = sdev->lun;
742 	sdev->hostdata = vdevice;
743 
744 	starget = scsi_target(sdev);
745 	vtarget = starget->hostdata;
746 	vdevice->vtarget = vtarget;
747 	vtarget->num_luns++;
748 
749 	if (sdev->channel == 1)
750 		sdev->no_uld_attach = 1;
751 
752 	return 0;
753 }
754 
755 static int mptspi_slave_configure(struct scsi_device *sdev)
756 {
757 	struct _MPT_SCSI_HOST *hd = shost_priv(sdev->host);
758 	VirtTarget *vtarget = scsi_target(sdev)->hostdata;
759 	int ret;
760 
761 	mptspi_initTarget(hd, vtarget, sdev);
762 
763 	ret = mptscsih_slave_configure(sdev);
764 
765 	if (ret)
766 		return ret;
767 
768 	ddvprintk(hd->ioc, printk(MYIOC_s_DEBUG_FMT "id=%d min_period=0x%02x"
769 		" max_offset=0x%02x max_width=%d\n", hd->ioc->name,
770 		sdev->id, spi_min_period(scsi_target(sdev)),
771 		spi_max_offset(scsi_target(sdev)),
772 		spi_max_width(scsi_target(sdev))));
773 
774 	if ((sdev->channel == 1 ||
775 	     !(mptspi_is_raid(hd, sdev->id))) &&
776 	    !spi_initial_dv(sdev->sdev_target))
777 		mptspi_dv_device(hd, sdev);
778 
779 	return 0;
780 }
781 
782 static int
783 mptspi_qcmd_lck(struct scsi_cmnd *SCpnt, void (*done)(struct scsi_cmnd *))
784 {
785 	struct _MPT_SCSI_HOST *hd = shost_priv(SCpnt->device->host);
786 	VirtDevice	*vdevice = SCpnt->device->hostdata;
787 	MPT_ADAPTER *ioc = hd->ioc;
788 
789 	if (!vdevice || !vdevice->vtarget) {
790 		SCpnt->result = DID_NO_CONNECT << 16;
791 		done(SCpnt);
792 		return 0;
793 	}
794 
795 	if (SCpnt->device->channel == 1 &&
796 		mptscsih_is_phys_disk(ioc, 0, SCpnt->device->id) == 0) {
797 		SCpnt->result = DID_NO_CONNECT << 16;
798 		done(SCpnt);
799 		return 0;
800 	}
801 
802 	if (spi_dv_pending(scsi_target(SCpnt->device)))
803 		ddvprintk(ioc, scsi_print_command(SCpnt));
804 
805 	return mptscsih_qcmd(SCpnt,done);
806 }
807 
808 static DEF_SCSI_QCMD(mptspi_qcmd)
809 
810 static void mptspi_slave_destroy(struct scsi_device *sdev)
811 {
812 	struct scsi_target *starget = scsi_target(sdev);
813 	VirtTarget *vtarget = starget->hostdata;
814 	VirtDevice *vdevice = sdev->hostdata;
815 
816 	/* Will this be the last lun on a non-raid device? */
817 	if (vtarget->num_luns == 1 && vdevice->configured_lun) {
818 		struct _CONFIG_PAGE_SCSI_DEVICE_1 pg1;
819 
820 		/* Async Narrow */
821 		pg1.RequestedParameters = 0;
822 		pg1.Reserved = 0;
823 		pg1.Configuration = 0;
824 
825 		mptspi_write_spi_device_pg1(starget, &pg1);
826 	}
827 
828 	mptscsih_slave_destroy(sdev);
829 }
830 
831 static struct scsi_host_template mptspi_driver_template = {
832 	.module				= THIS_MODULE,
833 	.proc_name			= "mptspi",
834 	.proc_info			= mptscsih_proc_info,
835 	.name				= "MPT SPI Host",
836 	.info				= mptscsih_info,
837 	.queuecommand			= mptspi_qcmd,
838 	.target_alloc			= mptspi_target_alloc,
839 	.slave_alloc			= mptspi_slave_alloc,
840 	.slave_configure		= mptspi_slave_configure,
841 	.target_destroy			= mptspi_target_destroy,
842 	.slave_destroy			= mptspi_slave_destroy,
843 	.change_queue_depth 		= mptscsih_change_queue_depth,
844 	.eh_abort_handler		= mptscsih_abort,
845 	.eh_device_reset_handler	= mptscsih_dev_reset,
846 	.eh_bus_reset_handler		= mptscsih_bus_reset,
847 	.eh_host_reset_handler		= mptscsih_host_reset,
848 	.bios_param			= mptscsih_bios_param,
849 	.can_queue			= MPT_SCSI_CAN_QUEUE,
850 	.this_id			= -1,
851 	.sg_tablesize			= MPT_SCSI_SG_DEPTH,
852 	.max_sectors			= 8192,
853 	.cmd_per_lun			= 7,
854 	.use_clustering			= ENABLE_CLUSTERING,
855 	.shost_attrs			= mptscsih_host_attrs,
856 };
857 
858 static int mptspi_write_spi_device_pg1(struct scsi_target *starget,
859 			       struct _CONFIG_PAGE_SCSI_DEVICE_1 *pass_pg1)
860 {
861 	struct Scsi_Host *shost = dev_to_shost(&starget->dev);
862 	struct _MPT_SCSI_HOST *hd = shost_priv(shost);
863 	struct _MPT_ADAPTER *ioc = hd->ioc;
864 	struct _CONFIG_PAGE_SCSI_DEVICE_1 *pg1;
865 	dma_addr_t pg1_dma;
866 	int size;
867 	struct _x_config_parms cfg;
868 	struct _CONFIG_PAGE_HEADER hdr;
869 	int err = -EBUSY;
870 	u32 nego_parms;
871 	u32 period;
872 	struct scsi_device *sdev;
873 	int i;
874 
875 	/* don't allow updating nego parameters on RAID devices */
876 	if (starget->channel == 0 &&
877 	    mptspi_is_raid(hd, starget->id))
878 		return -1;
879 
880 	size = ioc->spi_data.sdp1length * 4;
881 
882 	pg1 = dma_alloc_coherent(&ioc->pcidev->dev, size, &pg1_dma, GFP_KERNEL);
883 	if (pg1 == NULL) {
884 		starget_printk(KERN_ERR, starget, MYIOC_s_FMT
885 		    "dma_alloc_coherent for parameters failed\n", ioc->name);
886 		return -EINVAL;
887 	}
888 
889 	memset(&hdr, 0, sizeof(hdr));
890 
891 	hdr.PageVersion = ioc->spi_data.sdp1version;
892 	hdr.PageLength = ioc->spi_data.sdp1length;
893 	hdr.PageNumber = 1;
894 	hdr.PageType = MPI_CONFIG_PAGETYPE_SCSI_DEVICE;
895 
896 	memset(&cfg, 0, sizeof(cfg));
897 
898 	cfg.cfghdr.hdr = &hdr;
899 	cfg.physAddr = pg1_dma;
900 	cfg.action = MPI_CONFIG_ACTION_PAGE_WRITE_CURRENT;
901 	cfg.dir = 1;
902 	cfg.pageAddr = starget->id;
903 
904 	memcpy(pg1, pass_pg1, size);
905 
906 	pg1->Header.PageVersion = hdr.PageVersion;
907 	pg1->Header.PageLength = hdr.PageLength;
908 	pg1->Header.PageNumber = hdr.PageNumber;
909 	pg1->Header.PageType = hdr.PageType;
910 
911 	nego_parms = le32_to_cpu(pg1->RequestedParameters);
912 	period = (nego_parms & MPI_SCSIDEVPAGE1_RP_MIN_SYNC_PERIOD_MASK) >>
913 		MPI_SCSIDEVPAGE1_RP_SHIFT_MIN_SYNC_PERIOD;
914 	if (period == 8) {
915 		/* Turn on inline data padding for TAPE when running U320 */
916 		for (i = 0 ; i < 16; i++) {
917 			sdev = scsi_device_lookup_by_target(starget, i);
918 			if (sdev && sdev->type == TYPE_TAPE) {
919 				sdev_printk(KERN_DEBUG, sdev, MYIOC_s_FMT
920 					    "IDP:ON\n", ioc->name);
921 				nego_parms |= MPI_SCSIDEVPAGE1_RP_IDP;
922 				pg1->RequestedParameters =
923 				    cpu_to_le32(nego_parms);
924 				break;
925 			}
926 		}
927 	}
928 
929 	mptspi_print_write_nego(hd, starget, le32_to_cpu(pg1->RequestedParameters));
930 
931 	if (mpt_config(ioc, &cfg)) {
932 		starget_printk(KERN_ERR, starget, MYIOC_s_FMT
933 		    "mpt_config failed\n", ioc->name);
934 		goto out_free;
935 	}
936 	err = 0;
937 
938  out_free:
939 	dma_free_coherent(&ioc->pcidev->dev, size, pg1, pg1_dma);
940 	return err;
941 }
942 
943 static void mptspi_write_offset(struct scsi_target *starget, int offset)
944 {
945 	struct _CONFIG_PAGE_SCSI_DEVICE_1 pg1;
946 	u32 nego;
947 
948 	if (offset < 0)
949 		offset = 0;
950 
951 	if (offset > 255)
952 		offset = 255;
953 
954 	if (spi_offset(starget) == -1)
955 		mptspi_read_parameters(starget);
956 
957 	spi_offset(starget) = offset;
958 
959 	nego = mptspi_getRP(starget);
960 
961 	pg1.RequestedParameters = cpu_to_le32(nego);
962 	pg1.Reserved = 0;
963 	pg1.Configuration = 0;
964 
965 	mptspi_write_spi_device_pg1(starget, &pg1);
966 }
967 
968 static void mptspi_write_period(struct scsi_target *starget, int period)
969 {
970 	struct _CONFIG_PAGE_SCSI_DEVICE_1 pg1;
971 	u32 nego;
972 
973 	if (period < 8)
974 		period = 8;
975 
976 	if (period > 255)
977 		period = 255;
978 
979 	if (spi_period(starget) == -1)
980 		mptspi_read_parameters(starget);
981 
982 	if (period == 8) {
983 		spi_iu(starget) = 1;
984 		spi_dt(starget) = 1;
985 	} else if (period == 9) {
986 		spi_dt(starget) = 1;
987 	}
988 
989 	spi_period(starget) = period;
990 
991 	nego = mptspi_getRP(starget);
992 
993 	pg1.RequestedParameters = cpu_to_le32(nego);
994 	pg1.Reserved = 0;
995 	pg1.Configuration = 0;
996 
997 	mptspi_write_spi_device_pg1(starget, &pg1);
998 }
999 
1000 static void mptspi_write_dt(struct scsi_target *starget, int dt)
1001 {
1002 	struct _CONFIG_PAGE_SCSI_DEVICE_1 pg1;
1003 	u32 nego;
1004 
1005 	if (spi_period(starget) == -1)
1006 		mptspi_read_parameters(starget);
1007 
1008 	if (!dt && spi_period(starget) < 10)
1009 		spi_period(starget) = 10;
1010 
1011 	spi_dt(starget) = dt;
1012 
1013 	nego = mptspi_getRP(starget);
1014 
1015 
1016 	pg1.RequestedParameters = cpu_to_le32(nego);
1017 	pg1.Reserved = 0;
1018 	pg1.Configuration = 0;
1019 
1020 	mptspi_write_spi_device_pg1(starget, &pg1);
1021 }
1022 
1023 static void mptspi_write_iu(struct scsi_target *starget, int iu)
1024 {
1025 	struct _CONFIG_PAGE_SCSI_DEVICE_1 pg1;
1026 	u32 nego;
1027 
1028 	if (spi_period(starget) == -1)
1029 		mptspi_read_parameters(starget);
1030 
1031 	if (!iu && spi_period(starget) < 9)
1032 		spi_period(starget) = 9;
1033 
1034 	spi_iu(starget) = iu;
1035 
1036 	nego = mptspi_getRP(starget);
1037 
1038 	pg1.RequestedParameters = cpu_to_le32(nego);
1039 	pg1.Reserved = 0;
1040 	pg1.Configuration = 0;
1041 
1042 	mptspi_write_spi_device_pg1(starget, &pg1);
1043 }
1044 
1045 #define MPTSPI_SIMPLE_TRANSPORT_PARM(parm) 				\
1046 static void mptspi_write_##parm(struct scsi_target *starget, int parm)\
1047 {									\
1048 	struct _CONFIG_PAGE_SCSI_DEVICE_1 pg1;				\
1049 	u32 nego;							\
1050 									\
1051 	spi_##parm(starget) = parm;					\
1052 									\
1053 	nego = mptspi_getRP(starget);					\
1054 									\
1055 	pg1.RequestedParameters = cpu_to_le32(nego);			\
1056 	pg1.Reserved = 0;						\
1057 	pg1.Configuration = 0;						\
1058 									\
1059 	mptspi_write_spi_device_pg1(starget, &pg1);				\
1060 }
1061 
1062 MPTSPI_SIMPLE_TRANSPORT_PARM(rd_strm)
1063 MPTSPI_SIMPLE_TRANSPORT_PARM(wr_flow)
1064 MPTSPI_SIMPLE_TRANSPORT_PARM(rti)
1065 MPTSPI_SIMPLE_TRANSPORT_PARM(hold_mcs)
1066 MPTSPI_SIMPLE_TRANSPORT_PARM(pcomp_en)
1067 
1068 static void mptspi_write_qas(struct scsi_target *starget, int qas)
1069 {
1070 	struct _CONFIG_PAGE_SCSI_DEVICE_1 pg1;
1071 	struct Scsi_Host *shost = dev_to_shost(&starget->dev);
1072 	struct _MPT_SCSI_HOST *hd = shost_priv(shost);
1073 	VirtTarget *vtarget = starget->hostdata;
1074 	u32 nego;
1075 
1076 	if ((vtarget->negoFlags & MPT_TARGET_NO_NEGO_QAS) ||
1077 	    hd->ioc->spi_data.noQas)
1078 		spi_qas(starget) = 0;
1079 	else
1080 		spi_qas(starget) = qas;
1081 
1082 	nego = mptspi_getRP(starget);
1083 
1084 	pg1.RequestedParameters = cpu_to_le32(nego);
1085 	pg1.Reserved = 0;
1086 	pg1.Configuration = 0;
1087 
1088 	mptspi_write_spi_device_pg1(starget, &pg1);
1089 }
1090 
1091 static void mptspi_write_width(struct scsi_target *starget, int width)
1092 {
1093 	struct _CONFIG_PAGE_SCSI_DEVICE_1 pg1;
1094 	u32 nego;
1095 
1096 	if (!width) {
1097 		spi_dt(starget) = 0;
1098 		if (spi_period(starget) < 10)
1099 			spi_period(starget) = 10;
1100 	}
1101 
1102 	spi_width(starget) = width;
1103 
1104 	nego = mptspi_getRP(starget);
1105 
1106 	pg1.RequestedParameters = cpu_to_le32(nego);
1107 	pg1.Reserved = 0;
1108 	pg1.Configuration = 0;
1109 
1110 	mptspi_write_spi_device_pg1(starget, &pg1);
1111 }
1112 
1113 struct work_queue_wrapper {
1114 	struct work_struct	work;
1115 	struct _MPT_SCSI_HOST	*hd;
1116 	int			disk;
1117 };
1118 
1119 static void mpt_work_wrapper(struct work_struct *work)
1120 {
1121 	struct work_queue_wrapper *wqw =
1122 		container_of(work, struct work_queue_wrapper, work);
1123 	struct _MPT_SCSI_HOST *hd = wqw->hd;
1124 	MPT_ADAPTER *ioc = hd->ioc;
1125 	struct Scsi_Host *shost = ioc->sh;
1126 	struct scsi_device *sdev;
1127 	int disk = wqw->disk;
1128 	struct _CONFIG_PAGE_IOC_3 *pg3;
1129 
1130 	kfree(wqw);
1131 
1132 	mpt_findImVolumes(ioc);
1133 	pg3 = ioc->raid_data.pIocPg3;
1134 	if (!pg3)
1135 		return;
1136 
1137 	shost_for_each_device(sdev,shost) {
1138 		struct scsi_target *starget = scsi_target(sdev);
1139 		VirtTarget *vtarget = starget->hostdata;
1140 
1141 		/* only want to search RAID components */
1142 		if (sdev->channel != 1)
1143 			continue;
1144 
1145 		/* The id is the raid PhysDiskNum, even if
1146 		 * starget->id is the actual target address */
1147 		if(vtarget->id != disk)
1148 			continue;
1149 
1150 		starget_printk(KERN_INFO, vtarget->starget, MYIOC_s_FMT
1151 		    "Integrated RAID requests DV of new device\n", ioc->name);
1152 		mptspi_dv_device(hd, sdev);
1153 	}
1154 	shost_printk(KERN_INFO, shost, MYIOC_s_FMT
1155 	    "Integrated RAID detects new device %d\n", ioc->name, disk);
1156 	scsi_scan_target(&ioc->sh->shost_gendev, 1, disk, 0, 1);
1157 }
1158 
1159 
1160 static void mpt_dv_raid(struct _MPT_SCSI_HOST *hd, int disk)
1161 {
1162 	struct work_queue_wrapper *wqw = kmalloc(sizeof(*wqw), GFP_ATOMIC);
1163 	MPT_ADAPTER *ioc = hd->ioc;
1164 
1165 	if (!wqw) {
1166 		shost_printk(KERN_ERR, ioc->sh, MYIOC_s_FMT
1167 		    "Failed to act on RAID event for physical disk %d\n",
1168 		    ioc->name, disk);
1169 		return;
1170 	}
1171 	INIT_WORK(&wqw->work, mpt_work_wrapper);
1172 	wqw->hd = hd;
1173 	wqw->disk = disk;
1174 
1175 	schedule_work(&wqw->work);
1176 }
1177 
1178 static int
1179 mptspi_event_process(MPT_ADAPTER *ioc, EventNotificationReply_t *pEvReply)
1180 {
1181 	u8 event = le32_to_cpu(pEvReply->Event) & 0xFF;
1182 	struct _MPT_SCSI_HOST *hd = shost_priv(ioc->sh);
1183 
1184 	if (ioc->bus_type != SPI)
1185 		return 0;
1186 
1187 	if (hd && event ==  MPI_EVENT_INTEGRATED_RAID) {
1188 		int reason
1189 			= (le32_to_cpu(pEvReply->Data[0]) & 0x00FF0000) >> 16;
1190 
1191 		if (reason == MPI_EVENT_RAID_RC_DOMAIN_VAL_NEEDED) {
1192 			int disk = (le32_to_cpu(pEvReply->Data[0]) & 0xFF000000) >> 24;
1193 			mpt_dv_raid(hd, disk);
1194 		}
1195 	}
1196 	return mptscsih_event_process(ioc, pEvReply);
1197 }
1198 
1199 static int
1200 mptspi_deny_binding(struct scsi_target *starget)
1201 {
1202 	struct _MPT_SCSI_HOST *hd =
1203 		(struct _MPT_SCSI_HOST *)dev_to_shost(starget->dev.parent)->hostdata;
1204 	return ((mptspi_is_raid(hd, starget->id)) &&
1205 		starget->channel == 0) ? 1 : 0;
1206 }
1207 
1208 static struct spi_function_template mptspi_transport_functions = {
1209 	.get_offset	= mptspi_read_parameters,
1210 	.set_offset	= mptspi_write_offset,
1211 	.show_offset	= 1,
1212 	.get_period	= mptspi_read_parameters,
1213 	.set_period	= mptspi_write_period,
1214 	.show_period	= 1,
1215 	.get_width	= mptspi_read_parameters,
1216 	.set_width	= mptspi_write_width,
1217 	.show_width	= 1,
1218 	.get_iu		= mptspi_read_parameters,
1219 	.set_iu		= mptspi_write_iu,
1220 	.show_iu	= 1,
1221 	.get_dt		= mptspi_read_parameters,
1222 	.set_dt		= mptspi_write_dt,
1223 	.show_dt	= 1,
1224 	.get_qas	= mptspi_read_parameters,
1225 	.set_qas	= mptspi_write_qas,
1226 	.show_qas	= 1,
1227 	.get_wr_flow	= mptspi_read_parameters,
1228 	.set_wr_flow	= mptspi_write_wr_flow,
1229 	.show_wr_flow	= 1,
1230 	.get_rd_strm	= mptspi_read_parameters,
1231 	.set_rd_strm	= mptspi_write_rd_strm,
1232 	.show_rd_strm	= 1,
1233 	.get_rti	= mptspi_read_parameters,
1234 	.set_rti	= mptspi_write_rti,
1235 	.show_rti	= 1,
1236 	.get_pcomp_en	= mptspi_read_parameters,
1237 	.set_pcomp_en	= mptspi_write_pcomp_en,
1238 	.show_pcomp_en	= 1,
1239 	.get_hold_mcs	= mptspi_read_parameters,
1240 	.set_hold_mcs	= mptspi_write_hold_mcs,
1241 	.show_hold_mcs	= 1,
1242 	.deny_binding	= mptspi_deny_binding,
1243 };
1244 
1245 /****************************************************************************
1246  * Supported hardware
1247  */
1248 
1249 static struct pci_device_id mptspi_pci_table[] = {
1250 	{ PCI_VENDOR_ID_LSI_LOGIC, MPI_MANUFACTPAGE_DEVID_53C1030,
1251 		PCI_ANY_ID, PCI_ANY_ID },
1252 	{ PCI_VENDOR_ID_ATTO, MPI_MANUFACTPAGE_DEVID_53C1030,
1253 		PCI_ANY_ID, PCI_ANY_ID },
1254 	{ PCI_VENDOR_ID_LSI_LOGIC, MPI_MANUFACTPAGE_DEVID_53C1035,
1255 		PCI_ANY_ID, PCI_ANY_ID },
1256 	{0}	/* Terminating entry */
1257 };
1258 MODULE_DEVICE_TABLE(pci, mptspi_pci_table);
1259 
1260 
1261 /*
1262  * renegotiate for a given target
1263  */
1264 static void
1265 mptspi_dv_renegotiate_work(struct work_struct *work)
1266 {
1267 	struct work_queue_wrapper *wqw =
1268 		container_of(work, struct work_queue_wrapper, work);
1269 	struct _MPT_SCSI_HOST *hd = wqw->hd;
1270 	struct scsi_device *sdev;
1271 	struct scsi_target *starget;
1272 	struct _CONFIG_PAGE_SCSI_DEVICE_1 pg1;
1273 	u32 nego;
1274 	MPT_ADAPTER *ioc = hd->ioc;
1275 
1276 	kfree(wqw);
1277 
1278 	if (hd->spi_pending) {
1279 		shost_for_each_device(sdev, ioc->sh) {
1280 			if  (hd->spi_pending & (1 << sdev->id))
1281 				continue;
1282 			starget = scsi_target(sdev);
1283 			nego = mptspi_getRP(starget);
1284 			pg1.RequestedParameters = cpu_to_le32(nego);
1285 			pg1.Reserved = 0;
1286 			pg1.Configuration = 0;
1287 			mptspi_write_spi_device_pg1(starget, &pg1);
1288 		}
1289 	} else {
1290 		shost_for_each_device(sdev, ioc->sh)
1291 			mptspi_dv_device(hd, sdev);
1292 	}
1293 }
1294 
1295 static void
1296 mptspi_dv_renegotiate(struct _MPT_SCSI_HOST *hd)
1297 {
1298 	struct work_queue_wrapper *wqw = kmalloc(sizeof(*wqw), GFP_ATOMIC);
1299 
1300 	if (!wqw)
1301 		return;
1302 
1303 	INIT_WORK(&wqw->work, mptspi_dv_renegotiate_work);
1304 	wqw->hd = hd;
1305 
1306 	schedule_work(&wqw->work);
1307 }
1308 
1309 /*
1310  * spi module reset handler
1311  */
1312 static int
1313 mptspi_ioc_reset(MPT_ADAPTER *ioc, int reset_phase)
1314 {
1315 	int rc;
1316 
1317 	rc = mptscsih_ioc_reset(ioc, reset_phase);
1318 	if ((ioc->bus_type != SPI) || (!rc))
1319 		return rc;
1320 
1321 	/* only try to do a renegotiation if we're properly set up
1322 	 * if we get an ioc fault on bringup, ioc->sh will be NULL */
1323 	if (reset_phase == MPT_IOC_POST_RESET &&
1324 	    ioc->sh) {
1325 		struct _MPT_SCSI_HOST *hd = shost_priv(ioc->sh);
1326 
1327 		mptspi_dv_renegotiate(hd);
1328 	}
1329 
1330 	return rc;
1331 }
1332 
1333 #ifdef CONFIG_PM
1334 /*
1335  * spi module resume handler
1336  */
1337 static int
1338 mptspi_resume(struct pci_dev *pdev)
1339 {
1340 	MPT_ADAPTER 	*ioc = pci_get_drvdata(pdev);
1341 	struct _MPT_SCSI_HOST *hd = shost_priv(ioc->sh);
1342 	int rc;
1343 
1344 	rc = mptscsih_resume(pdev);
1345 	mptspi_dv_renegotiate(hd);
1346 
1347 	return rc;
1348 }
1349 #endif
1350 
1351 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1352 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1353 /*
1354  *	mptspi_probe - Installs scsi devices per bus.
1355  *	@pdev: Pointer to pci_dev structure
1356  *
1357  *	Returns 0 for success, non-zero for failure.
1358  *
1359  */
1360 static int
1361 mptspi_probe(struct pci_dev *pdev, const struct pci_device_id *id)
1362 {
1363 	struct Scsi_Host	*sh;
1364 	MPT_SCSI_HOST		*hd;
1365 	MPT_ADAPTER 		*ioc;
1366 	unsigned long		 flags;
1367 	int			 ii;
1368 	int			 numSGE = 0;
1369 	int			 scale;
1370 	int			 ioc_cap;
1371 	int			error=0;
1372 	int			r;
1373 
1374 	if ((r = mpt_attach(pdev,id)) != 0)
1375 		return r;
1376 
1377 	ioc = pci_get_drvdata(pdev);
1378 	ioc->DoneCtx = mptspiDoneCtx;
1379 	ioc->TaskCtx = mptspiTaskCtx;
1380 	ioc->InternalCtx = mptspiInternalCtx;
1381 
1382 	/*  Added sanity check on readiness of the MPT adapter.
1383 	 */
1384 	if (ioc->last_state != MPI_IOC_STATE_OPERATIONAL) {
1385 		printk(MYIOC_s_WARN_FMT
1386 		  "Skipping because it's not operational!\n",
1387 		  ioc->name);
1388 		error = -ENODEV;
1389 		goto out_mptspi_probe;
1390 	}
1391 
1392 	if (!ioc->active) {
1393 		printk(MYIOC_s_WARN_FMT "Skipping because it's disabled!\n",
1394 		  ioc->name);
1395 		error = -ENODEV;
1396 		goto out_mptspi_probe;
1397 	}
1398 
1399 	/*  Sanity check - ensure at least 1 port is INITIATOR capable
1400 	 */
1401 	ioc_cap = 0;
1402 	for (ii=0; ii < ioc->facts.NumberOfPorts; ii++) {
1403 		if (ioc->pfacts[ii].ProtocolFlags &
1404 		    MPI_PORTFACTS_PROTOCOL_INITIATOR)
1405 			ioc_cap ++;
1406 	}
1407 
1408 	if (!ioc_cap) {
1409 		printk(MYIOC_s_WARN_FMT
1410 			"Skipping ioc=%p because SCSI Initiator mode is NOT enabled!\n",
1411 			ioc->name, ioc);
1412 		return 0;
1413 	}
1414 
1415 	sh = scsi_host_alloc(&mptspi_driver_template, sizeof(MPT_SCSI_HOST));
1416 
1417 	if (!sh) {
1418 		printk(MYIOC_s_WARN_FMT
1419 			"Unable to register controller with SCSI subsystem\n",
1420 			ioc->name);
1421 		error = -1;
1422 		goto out_mptspi_probe;
1423         }
1424 
1425 	spin_lock_irqsave(&ioc->FreeQlock, flags);
1426 
1427 	/* Attach the SCSI Host to the IOC structure
1428 	 */
1429 	ioc->sh = sh;
1430 
1431 	sh->io_port = 0;
1432 	sh->n_io_port = 0;
1433 	sh->irq = 0;
1434 
1435 	/* set 16 byte cdb's */
1436 	sh->max_cmd_len = 16;
1437 
1438 	/* Yikes!  This is important!
1439 	 * Otherwise, by default, linux
1440 	 * only scans target IDs 0-7!
1441 	 * pfactsN->MaxDevices unreliable
1442 	 * (not supported in early
1443 	 *	versions of the FW).
1444 	 * max_id = 1 + actual max id,
1445 	 * max_lun = 1 + actual last lun,
1446 	 *	see hosts.h :o(
1447 	 */
1448 	sh->max_id = ioc->devices_per_bus;
1449 
1450 	sh->max_lun = MPT_LAST_LUN + 1;
1451 	/*
1452 	 * If RAID Firmware Detected, setup virtual channel
1453 	 */
1454 	if (ioc->ir_firmware)
1455 		sh->max_channel = 1;
1456 	else
1457 		sh->max_channel = 0;
1458 	sh->this_id = ioc->pfacts[0].PortSCSIID;
1459 
1460 	/* Required entry.
1461 	 */
1462 	sh->unique_id = ioc->id;
1463 
1464 	/* Verify that we won't exceed the maximum
1465 	 * number of chain buffers
1466 	 * We can optimize:  ZZ = req_sz/sizeof(SGE)
1467 	 * For 32bit SGE's:
1468 	 *  numSGE = 1 + (ZZ-1)*(maxChain -1) + ZZ
1469 	 *               + (req_sz - 64)/sizeof(SGE)
1470 	 * A slightly different algorithm is required for
1471 	 * 64bit SGEs.
1472 	 */
1473 	scale = ioc->req_sz/ioc->SGE_size;
1474 	if (ioc->sg_addr_size == sizeof(u64)) {
1475 		numSGE = (scale - 1) *
1476 		  (ioc->facts.MaxChainDepth-1) + scale +
1477 		  (ioc->req_sz - 60) / ioc->SGE_size;
1478 	} else {
1479 		numSGE = 1 + (scale - 1) *
1480 		  (ioc->facts.MaxChainDepth-1) + scale +
1481 		  (ioc->req_sz - 64) / ioc->SGE_size;
1482 	}
1483 
1484 	if (numSGE < sh->sg_tablesize) {
1485 		/* Reset this value */
1486 		dprintk(ioc, printk(MYIOC_s_DEBUG_FMT
1487 		  "Resetting sg_tablesize to %d from %d\n",
1488 		  ioc->name, numSGE, sh->sg_tablesize));
1489 		sh->sg_tablesize = numSGE;
1490 	}
1491 
1492 	spin_unlock_irqrestore(&ioc->FreeQlock, flags);
1493 
1494 	hd = shost_priv(sh);
1495 	hd->ioc = ioc;
1496 
1497 	/* SCSI needs scsi_cmnd lookup table!
1498 	 * (with size equal to req_depth*PtrSz!)
1499 	 */
1500 	ioc->ScsiLookup = kcalloc(ioc->req_depth, sizeof(void *), GFP_ATOMIC);
1501 	if (!ioc->ScsiLookup) {
1502 		error = -ENOMEM;
1503 		goto out_mptspi_probe;
1504 	}
1505 	spin_lock_init(&ioc->scsi_lookup_lock);
1506 
1507 	dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "ScsiLookup @ %p\n",
1508 		 ioc->name, ioc->ScsiLookup));
1509 
1510 	ioc->spi_data.Saf_Te = mpt_saf_te;
1511 	ddvprintk(ioc, printk(MYIOC_s_DEBUG_FMT
1512 		"saf_te %x\n",
1513 		ioc->name,
1514 		mpt_saf_te));
1515 	ioc->spi_data.noQas = 0;
1516 
1517 	hd->last_queue_full = 0;
1518 	hd->spi_pending = 0;
1519 
1520 	/* Some versions of the firmware don't support page 0; without
1521 	 * that we can't get the parameters */
1522 	if (ioc->spi_data.sdp0length != 0)
1523 		sh->transportt = mptspi_transport_template;
1524 
1525 	error = scsi_add_host (sh, &ioc->pcidev->dev);
1526 	if(error) {
1527 		dprintk(ioc, printk(MYIOC_s_ERR_FMT
1528 		  "scsi_add_host failed\n", ioc->name));
1529 		goto out_mptspi_probe;
1530 	}
1531 
1532 	/*
1533 	 * issue internal bus reset
1534 	 */
1535 	if (ioc->spi_data.bus_reset)
1536 		mptscsih_IssueTaskMgmt(hd,
1537 		    MPI_SCSITASKMGMT_TASKTYPE_RESET_BUS,
1538 		    0, 0, 0, 0, 5);
1539 
1540 	scsi_scan_host(sh);
1541 	return 0;
1542 
1543 out_mptspi_probe:
1544 
1545 	mptscsih_remove(pdev);
1546 	return error;
1547 }
1548 
1549 static struct pci_driver mptspi_driver = {
1550 	.name		= "mptspi",
1551 	.id_table	= mptspi_pci_table,
1552 	.probe		= mptspi_probe,
1553 	.remove		= __devexit_p(mptscsih_remove),
1554 	.shutdown	= mptscsih_shutdown,
1555 #ifdef CONFIG_PM
1556 	.suspend	= mptscsih_suspend,
1557 	.resume		= mptspi_resume,
1558 #endif
1559 };
1560 
1561 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1562 /**
1563  *	mptspi_init - Register MPT adapter(s) as SCSI host(s) with SCSI mid-layer.
1564  *
1565  *	Returns 0 for success, non-zero for failure.
1566  */
1567 static int __init
1568 mptspi_init(void)
1569 {
1570 	int error;
1571 
1572 	show_mptmod_ver(my_NAME, my_VERSION);
1573 
1574 	mptspi_transport_template = spi_attach_transport(&mptspi_transport_functions);
1575 	if (!mptspi_transport_template)
1576 		return -ENODEV;
1577 
1578 	mptspiDoneCtx = mpt_register(mptscsih_io_done, MPTSPI_DRIVER,
1579 	    "mptscsih_io_done");
1580 	mptspiTaskCtx = mpt_register(mptscsih_taskmgmt_complete, MPTSPI_DRIVER,
1581 	    "mptscsih_taskmgmt_complete");
1582 	mptspiInternalCtx = mpt_register(mptscsih_scandv_complete,
1583 	    MPTSPI_DRIVER, "mptscsih_scandv_complete");
1584 
1585 	mpt_event_register(mptspiDoneCtx, mptspi_event_process);
1586 	mpt_reset_register(mptspiDoneCtx, mptspi_ioc_reset);
1587 
1588 	error = pci_register_driver(&mptspi_driver);
1589 	if (error)
1590 		spi_release_transport(mptspi_transport_template);
1591 
1592 	return error;
1593 }
1594 
1595 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1596 /*=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=*/
1597 /**
1598  *	mptspi_exit - Unregisters MPT adapter(s)
1599  */
1600 static void __exit
1601 mptspi_exit(void)
1602 {
1603 	pci_unregister_driver(&mptspi_driver);
1604 
1605 	mpt_reset_deregister(mptspiDoneCtx);
1606 	mpt_event_deregister(mptspiDoneCtx);
1607 
1608 	mpt_deregister(mptspiInternalCtx);
1609 	mpt_deregister(mptspiTaskCtx);
1610 	mpt_deregister(mptspiDoneCtx);
1611 	spi_release_transport(mptspi_transport_template);
1612 }
1613 
1614 module_init(mptspi_init);
1615 module_exit(mptspi_exit);
1616