1 /* 2 * DVB USB framework 3 * 4 * Copyright (C) 2004-6 Patrick Boettcher <patrick.boettcher@posteo.de> 5 * Copyright (C) 2012 Antti Palosaari <crope@iki.fi> 6 * 7 * This program is free software; you can redistribute it and/or modify 8 * it under the terms of the GNU General Public License as published by 9 * the Free Software Foundation; either version 2 of the License, or 10 * (at your option) any later version. 11 * 12 * This program is distributed in the hope that it will be useful, 13 * but WITHOUT ANY WARRANTY; without even the implied warranty of 14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 15 * GNU General Public License for more details. 16 * 17 * You should have received a copy of the GNU General Public License along 18 * with this program; if not, write to the Free Software Foundation, Inc., 19 * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. 20 */ 21 22 #ifndef DVB_USB_H 23 #define DVB_USB_H 24 25 #include <linux/usb/input.h> 26 #include <linux/firmware.h> 27 #include <media/rc-core.h> 28 #include <media/media-device.h> 29 30 #include "dvb_frontend.h" 31 #include "dvb_demux.h" 32 #include "dvb_net.h" 33 #include "dmxdev.h" 34 #include "dvb-usb-ids.h" 35 36 /* 37 * device file: /dev/dvb/adapter[0-1]/frontend[0-2] 38 * 39 * |-- device 40 * | |-- adapter0 41 * | | |-- frontend0 42 * | | |-- frontend1 43 * | | `-- frontend2 44 * | `-- adapter1 45 * | |-- frontend0 46 * | |-- frontend1 47 * | `-- frontend2 48 * 49 * 50 * Commonly used variable names: 51 * d = pointer to device (struct dvb_usb_device *) 52 * adap = pointer to adapter (struct dvb_usb_adapter *) 53 * fe = pointer to frontend (struct dvb_frontend *) 54 * 55 * Use macros defined in that file to resolve needed pointers. 56 */ 57 58 /* helper macros for every DVB USB driver use */ 59 #define adap_to_d(adap) (container_of(adap, struct dvb_usb_device, \ 60 adapter[adap->id])) 61 #define adap_to_priv(adap) (adap_to_d(adap)->priv) 62 #define fe_to_adap(fe) ((struct dvb_usb_adapter *) ((fe)->dvb->priv)) 63 #define fe_to_d(fe) (adap_to_d(fe_to_adap(fe))) 64 #define fe_to_priv(fe) (fe_to_d(fe)->priv) 65 #define d_to_priv(d) (d->priv) 66 67 #define dvb_usb_dbg_usb_control_msg(udev, r, t, v, i, b, l) { \ 68 char *direction; \ 69 if (t == (USB_TYPE_VENDOR | USB_DIR_OUT)) \ 70 direction = ">>>"; \ 71 else \ 72 direction = "<<<"; \ 73 dev_dbg(&udev->dev, "%s: %02x %02x %02x %02x %02x %02x %02x %02x " \ 74 "%s %*ph\n", __func__, t, r, v & 0xff, v >> 8, \ 75 i & 0xff, i >> 8, l & 0xff, l >> 8, direction, l, b); \ 76 } 77 78 #define DVB_USB_STREAM_BULK(endpoint_, count_, size_) { \ 79 .type = USB_BULK, \ 80 .count = count_, \ 81 .endpoint = endpoint_, \ 82 .u = { \ 83 .bulk = { \ 84 .buffersize = size_, \ 85 } \ 86 } \ 87 } 88 89 #define DVB_USB_STREAM_ISOC(endpoint_, count_, frames_, size_, interval_) { \ 90 .type = USB_ISOC, \ 91 .count = count_, \ 92 .endpoint = endpoint_, \ 93 .u = { \ 94 .isoc = { \ 95 .framesperurb = frames_, \ 96 .framesize = size_,\ 97 .interval = interval_, \ 98 } \ 99 } \ 100 } 101 102 #define DVB_USB_DEVICE(vend, prod, props_, name_, rc) \ 103 .match_flags = USB_DEVICE_ID_MATCH_DEVICE, \ 104 .idVendor = (vend), \ 105 .idProduct = (prod), \ 106 .driver_info = (kernel_ulong_t) &((const struct dvb_usb_driver_info) { \ 107 .props = (props_), \ 108 .name = (name_), \ 109 .rc_map = (rc), \ 110 }) 111 112 struct dvb_usb_device; 113 struct dvb_usb_adapter; 114 115 /** 116 * structure for carrying all needed data from the device driver to the general 117 * dvb usb routines 118 * @name: device name 119 * @rc_map: name of rc codes table 120 * @props: structure containing all device properties 121 */ 122 struct dvb_usb_driver_info { 123 const char *name; 124 const char *rc_map; 125 const struct dvb_usb_device_properties *props; 126 }; 127 128 /** 129 * structure for remote controller configuration 130 * @map_name: name of rc codes table 131 * @allowed_protos: protocol(s) supported by the driver 132 * @change_protocol: callback to change protocol 133 * @query: called to query an event from the device 134 * @interval: time in ms between two queries 135 * @driver_type: used to point if a device supports raw mode 136 * @bulk_mode: device supports bulk mode for rc (disable polling mode) 137 */ 138 struct dvb_usb_rc { 139 const char *map_name; 140 u64 allowed_protos; 141 int (*change_protocol)(struct rc_dev *dev, u64 *rc_proto); 142 int (*query) (struct dvb_usb_device *d); 143 unsigned int interval; 144 enum rc_driver_type driver_type; 145 bool bulk_mode; 146 }; 147 148 /** 149 * usb streaming configration for adapter 150 * @type: urb type 151 * @count: count of used urbs 152 * @endpoint: stream usb endpoint number 153 */ 154 struct usb_data_stream_properties { 155 #define USB_BULK 1 156 #define USB_ISOC 2 157 u8 type; 158 u8 count; 159 u8 endpoint; 160 161 union { 162 struct { 163 unsigned int buffersize; /* per URB */ 164 } bulk; 165 struct { 166 int framesperurb; 167 int framesize; 168 int interval; 169 } isoc; 170 } u; 171 }; 172 173 /** 174 * properties of dvb usb device adapter 175 * @caps: adapter capabilities 176 * @pid_filter_count: pid count of adapter pid-filter 177 * @pid_filter_ctrl: called to enable/disable pid-filter 178 * @pid_filter: called to set/unset pid for filtering 179 * @stream: adapter usb stream configuration 180 */ 181 #define MAX_NO_OF_FE_PER_ADAP 3 182 struct dvb_usb_adapter_properties { 183 #define DVB_USB_ADAP_HAS_PID_FILTER 0x01 184 #define DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF 0x02 185 #define DVB_USB_ADAP_NEED_PID_FILTERING 0x04 186 u8 caps; 187 188 u8 pid_filter_count; 189 int (*pid_filter_ctrl) (struct dvb_usb_adapter *, int); 190 int (*pid_filter) (struct dvb_usb_adapter *, int, u16, int); 191 192 struct usb_data_stream_properties stream; 193 }; 194 195 /** 196 * struct dvb_usb_device_properties - properties of a dvb-usb-device 197 * @driver_name: name of the owning driver module 198 * @owner: owner of the dvb_adapter 199 * @adapter_nr: values from the DVB_DEFINE_MOD_OPT_ADAPTER_NR() macro 200 * @bInterfaceNumber: usb interface number driver binds 201 * @size_of_priv: bytes allocated for the driver private data 202 * @generic_bulk_ctrl_endpoint: bulk control endpoint number for sent 203 * @generic_bulk_ctrl_endpoint_response: bulk control endpoint number for 204 * receive 205 * @generic_bulk_ctrl_delay: delay between bulk control sent and receive message 206 * @identify_state: called to determine the firmware state (cold or warm) and 207 * return possible firmware file name to be loaded 208 * @firmware: name of the firmware file to be loaded 209 * @download_firmware: called to download the firmware 210 * @i2c_algo: i2c_algorithm if the device has i2c-adapter 211 * @num_adapters: dvb usb device adapter count 212 * @get_adapter_count: called to resolve adapter count 213 * @adapter: array of all adapter properties of device 214 * @power_ctrl: called to enable/disable power of the device 215 * @read_config: called to resolve device configuration 216 * @read_mac_address: called to resolve adapter mac-address 217 * @frontend_attach: called to attach the possible frontends 218 * @frontend_detach: called to detach the possible frontends 219 * @tuner_attach: called to attach the possible tuners 220 * @frontend_ctrl: called to power on/off active frontend 221 * @streaming_ctrl: called to start/stop the usb streaming of adapter 222 * @init: called after adapters are created in order to finalize device 223 * configuration 224 * @exit: called when driver is unloaded 225 * @get_rc_config: called to resolve used remote controller configuration 226 * @get_stream_config: called to resolve input and output stream configuration 227 * of the adapter just before streaming is started. input stream is transport 228 * stream from the demodulator and output stream is usb stream to host. 229 */ 230 #define MAX_NO_OF_ADAPTER_PER_DEVICE 2 231 struct dvb_usb_device_properties { 232 const char *driver_name; 233 struct module *owner; 234 short *adapter_nr; 235 236 u8 bInterfaceNumber; 237 unsigned int size_of_priv; 238 u8 generic_bulk_ctrl_endpoint; 239 u8 generic_bulk_ctrl_endpoint_response; 240 unsigned int generic_bulk_ctrl_delay; 241 242 #define WARM 0 243 #define COLD 1 244 int (*identify_state) (struct dvb_usb_device *, const char **); 245 const char *firmware; 246 #define RECONNECTS_USB 1 247 int (*download_firmware) (struct dvb_usb_device *, 248 const struct firmware *); 249 250 struct i2c_algorithm *i2c_algo; 251 252 unsigned int num_adapters; 253 int (*get_adapter_count) (struct dvb_usb_device *); 254 struct dvb_usb_adapter_properties adapter[MAX_NO_OF_ADAPTER_PER_DEVICE]; 255 int (*power_ctrl) (struct dvb_usb_device *, int); 256 int (*read_config) (struct dvb_usb_device *d); 257 int (*read_mac_address) (struct dvb_usb_adapter *, u8 []); 258 int (*frontend_attach) (struct dvb_usb_adapter *); 259 int (*frontend_detach)(struct dvb_usb_adapter *); 260 int (*tuner_attach) (struct dvb_usb_adapter *); 261 int (*tuner_detach)(struct dvb_usb_adapter *); 262 int (*frontend_ctrl) (struct dvb_frontend *, int); 263 int (*streaming_ctrl) (struct dvb_frontend *, int); 264 int (*init) (struct dvb_usb_device *); 265 void (*exit) (struct dvb_usb_device *); 266 int (*get_rc_config) (struct dvb_usb_device *, struct dvb_usb_rc *); 267 #define DVB_USB_FE_TS_TYPE_188 0 268 #define DVB_USB_FE_TS_TYPE_204 1 269 #define DVB_USB_FE_TS_TYPE_RAW 2 270 int (*get_stream_config) (struct dvb_frontend *, u8 *, 271 struct usb_data_stream_properties *); 272 }; 273 274 /** 275 * generic object of an usb stream 276 * @buf_num: number of buffer allocated 277 * @buf_size: size of each buffer in buf_list 278 * @buf_list: array containing all allocate buffers for streaming 279 * @dma_addr: list of dma_addr_t for each buffer in buf_list 280 * 281 * @urbs_initialized: number of URBs initialized 282 * @urbs_submitted: number of URBs submitted 283 */ 284 #define MAX_NO_URBS_FOR_DATA_STREAM 10 285 struct usb_data_stream { 286 struct usb_device *udev; 287 struct usb_data_stream_properties props; 288 289 #define USB_STATE_INIT 0x00 290 #define USB_STATE_URB_BUF 0x01 291 u8 state; 292 293 void (*complete) (struct usb_data_stream *, u8 *, size_t); 294 295 struct urb *urb_list[MAX_NO_URBS_FOR_DATA_STREAM]; 296 int buf_num; 297 unsigned long buf_size; 298 u8 *buf_list[MAX_NO_URBS_FOR_DATA_STREAM]; 299 dma_addr_t dma_addr[MAX_NO_URBS_FOR_DATA_STREAM]; 300 301 int urbs_initialized; 302 int urbs_submitted; 303 304 void *user_priv; 305 }; 306 307 /** 308 * dvb adapter object on dvb usb device 309 * @props: pointer to adapter properties 310 * @stream: adapter the usb data stream 311 * @id: index of this adapter (starting with 0) 312 * @ts_type: transport stream, input stream, type 313 * @suspend_resume_active: set when there is ongoing suspend / resume 314 * @pid_filtering: is hardware pid_filtering used or not 315 * @feed_count: current feed count 316 * @max_feed_count: maimum feed count device can handle 317 * @dvb_adap: adapter dvb_adapter 318 * @dmxdev: adapter dmxdev 319 * @demux: adapter software demuxer 320 * @dvb_net: adapter dvb_net interfaces 321 * @sync_mutex: mutex used to sync control and streaming of the adapter 322 * @fe: adapter frontends 323 * @fe_init: rerouted frontend-init function 324 * @fe_sleep: rerouted frontend-sleep function 325 */ 326 struct dvb_usb_adapter { 327 const struct dvb_usb_adapter_properties *props; 328 struct usb_data_stream stream; 329 u8 id; 330 u8 ts_type; 331 bool suspend_resume_active; 332 bool pid_filtering; 333 u8 feed_count; 334 u8 max_feed_count; 335 s8 active_fe; 336 #define ADAP_INIT 0 337 #define ADAP_SLEEP 1 338 #define ADAP_STREAMING 2 339 unsigned long state_bits; 340 341 /* dvb */ 342 struct dvb_adapter dvb_adap; 343 struct dmxdev dmxdev; 344 struct dvb_demux demux; 345 struct dvb_net dvb_net; 346 347 struct dvb_frontend *fe[MAX_NO_OF_FE_PER_ADAP]; 348 int (*fe_init[MAX_NO_OF_FE_PER_ADAP]) (struct dvb_frontend *); 349 int (*fe_sleep[MAX_NO_OF_FE_PER_ADAP]) (struct dvb_frontend *); 350 }; 351 352 /** 353 * dvb usb device object 354 * @props: device properties 355 * @name: device name 356 * @rc_map: name of rc codes table 357 * @rc_polling_active: set when RC polling is active 358 * @intf: pointer to the device's struct usb_interface 359 * @udev: pointer to the device's struct usb_device 360 * @rc: remote controller configuration 361 * @powered: indicated whether the device is power or not 362 * @usb_mutex: mutex for usb control messages 363 * @i2c_mutex: mutex for i2c-transfers 364 * @i2c_adap: device's i2c-adapter 365 * @rc_dev: rc device for the remote control 366 * @rc_query_work: work for polling remote 367 * @priv: private data of the actual driver (allocate by dvb usb, size defined 368 * in size_of_priv of dvb_usb_properties). 369 */ 370 struct dvb_usb_device { 371 const struct dvb_usb_device_properties *props; 372 const char *name; 373 const char *rc_map; 374 bool rc_polling_active; 375 struct usb_interface *intf; 376 struct usb_device *udev; 377 struct dvb_usb_rc rc; 378 int powered; 379 380 /* locking */ 381 struct mutex usb_mutex; 382 383 /* i2c */ 384 struct mutex i2c_mutex; 385 struct i2c_adapter i2c_adap; 386 387 struct dvb_usb_adapter adapter[MAX_NO_OF_ADAPTER_PER_DEVICE]; 388 389 /* remote control */ 390 struct rc_dev *rc_dev; 391 char rc_phys[64]; 392 struct delayed_work rc_query_work; 393 394 void *priv; 395 }; 396 397 extern int dvb_usbv2_probe(struct usb_interface *, 398 const struct usb_device_id *); 399 extern void dvb_usbv2_disconnect(struct usb_interface *); 400 extern int dvb_usbv2_suspend(struct usb_interface *, pm_message_t); 401 extern int dvb_usbv2_resume(struct usb_interface *); 402 extern int dvb_usbv2_reset_resume(struct usb_interface *); 403 404 /* the generic read/write method for device control */ 405 extern int dvb_usbv2_generic_rw(struct dvb_usb_device *, u8 *, u16, u8 *, u16); 406 extern int dvb_usbv2_generic_write(struct dvb_usb_device *, u8 *, u16); 407 /* caller must hold lock when locked versions are called */ 408 extern int dvb_usbv2_generic_rw_locked(struct dvb_usb_device *, 409 u8 *, u16, u8 *, u16); 410 extern int dvb_usbv2_generic_write_locked(struct dvb_usb_device *, u8 *, u16); 411 412 #endif 413