1 // SPDX-License-Identifier: GPL-2.0+ 2 // ir-imon-decoder.c - handle iMon protocol 3 // 4 // Copyright (C) 2018 by Sean Young <sean@mess.org> 5 6 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt 7 8 #include <linux/module.h> 9 #include "rc-core-priv.h" 10 11 #define IMON_UNIT 416 /* us */ 12 #define IMON_BITS 30 13 #define IMON_CHKBITS (BIT(30) | BIT(25) | BIT(24) | BIT(22) | \ 14 BIT(21) | BIT(20) | BIT(19) | BIT(18) | \ 15 BIT(17) | BIT(16) | BIT(14) | BIT(13) | \ 16 BIT(12) | BIT(11) | BIT(10) | BIT(9)) 17 18 /* 19 * This protocol has 30 bits. The format is one IMON_UNIT header pulse, 20 * followed by 30 bits. Each bit is one IMON_UNIT check field, and then 21 * one IMON_UNIT field with the actual bit (1=space, 0=pulse). 22 * The check field is always space for some bits, for others it is pulse if 23 * both the preceding and current bit are zero, else space. IMON_CHKBITS 24 * defines which bits are of type check. 25 * 26 * There is no way to distinguish an incomplete message from one where 27 * the lower bits are all set, iow. the last pulse is for the lowest 28 * bit which is 0. 29 */ 30 enum imon_state { 31 STATE_INACTIVE, 32 STATE_BIT_CHK, 33 STATE_BIT_START, 34 STATE_FINISHED, 35 STATE_ERROR, 36 }; 37 38 static void ir_imon_decode_scancode(struct rc_dev *dev) 39 { 40 struct imon_dec *imon = &dev->raw->imon; 41 42 /* Keyboard/Mouse toggle */ 43 if (imon->bits == 0x299115b7) 44 imon->stick_keyboard = !imon->stick_keyboard; 45 46 if ((imon->bits & 0xfc0000ff) == 0x680000b7) { 47 int rel_x, rel_y; 48 u8 buf; 49 50 buf = imon->bits >> 16; 51 rel_x = (buf & 0x08) | (buf & 0x10) >> 2 | 52 (buf & 0x20) >> 4 | (buf & 0x40) >> 6; 53 if (imon->bits & 0x02000000) 54 rel_x |= ~0x0f; 55 buf = imon->bits >> 8; 56 rel_y = (buf & 0x08) | (buf & 0x10) >> 2 | 57 (buf & 0x20) >> 4 | (buf & 0x40) >> 6; 58 if (imon->bits & 0x01000000) 59 rel_y |= ~0x0f; 60 61 if (rel_x && rel_y && imon->stick_keyboard) { 62 if (abs(rel_y) > abs(rel_x)) 63 imon->bits = rel_y > 0 ? 64 0x289515b7 : /* KEY_DOWN */ 65 0x2aa515b7; /* KEY_UP */ 66 else 67 imon->bits = rel_x > 0 ? 68 0x2ba515b7 : /* KEY_RIGHT */ 69 0x29a515b7; /* KEY_LEFT */ 70 } 71 72 if (!imon->stick_keyboard) { 73 input_report_rel(dev->input_dev, REL_X, rel_x); 74 input_report_rel(dev->input_dev, REL_Y, rel_y); 75 76 input_report_key(dev->input_dev, BTN_LEFT, 77 (imon->bits & 0x00010000) != 0); 78 input_report_key(dev->input_dev, BTN_RIGHT, 79 (imon->bits & 0x00040000) != 0); 80 } 81 } 82 83 rc_keydown(dev, RC_PROTO_IMON, imon->bits, 0); 84 } 85 86 /** 87 * ir_imon_decode() - Decode one iMON pulse or space 88 * @dev: the struct rc_dev descriptor of the device 89 * @ev: the struct ir_raw_event descriptor of the pulse/space 90 * 91 * This function returns -EINVAL if the pulse violates the state machine 92 */ 93 static int ir_imon_decode(struct rc_dev *dev, struct ir_raw_event ev) 94 { 95 struct imon_dec *data = &dev->raw->imon; 96 97 if (!is_timing_event(ev)) { 98 if (ev.reset) 99 data->state = STATE_INACTIVE; 100 return 0; 101 } 102 103 dev_dbg(&dev->dev, 104 "iMON decode started at state %d bitno %d (%uus %s)\n", 105 data->state, data->count, ev.duration, TO_STR(ev.pulse)); 106 107 /* 108 * Since iMON protocol is a series of bits, if at any point 109 * we encounter an error, make sure that any remaining bits 110 * aren't parsed as a scancode made up of less bits. 111 * 112 * Note that if the stick is held, then the remote repeats 113 * the scancode with about 12ms between them. So, make sure 114 * we have at least 10ms of space after an error. That way, 115 * we're at a new scancode. 116 */ 117 if (data->state == STATE_ERROR) { 118 if (!ev.pulse && ev.duration > MS_TO_US(10)) 119 data->state = STATE_INACTIVE; 120 return 0; 121 } 122 123 for (;;) { 124 if (!geq_margin(ev.duration, IMON_UNIT, IMON_UNIT / 2)) 125 return 0; 126 127 decrease_duration(&ev, IMON_UNIT); 128 129 switch (data->state) { 130 case STATE_INACTIVE: 131 if (ev.pulse) { 132 data->state = STATE_BIT_CHK; 133 data->bits = 0; 134 data->count = IMON_BITS; 135 } 136 break; 137 case STATE_BIT_CHK: 138 if (IMON_CHKBITS & BIT(data->count)) 139 data->last_chk = ev.pulse; 140 else if (ev.pulse) 141 goto err_out; 142 data->state = STATE_BIT_START; 143 break; 144 case STATE_BIT_START: 145 data->bits <<= 1; 146 if (!ev.pulse) 147 data->bits |= 1; 148 149 if (IMON_CHKBITS & BIT(data->count)) { 150 if (data->last_chk != !(data->bits & 3)) 151 goto err_out; 152 } 153 154 if (!data->count--) 155 data->state = STATE_FINISHED; 156 else 157 data->state = STATE_BIT_CHK; 158 break; 159 case STATE_FINISHED: 160 if (ev.pulse) 161 goto err_out; 162 ir_imon_decode_scancode(dev); 163 data->state = STATE_INACTIVE; 164 break; 165 } 166 } 167 168 err_out: 169 dev_dbg(&dev->dev, 170 "iMON decode failed at state %d bitno %d (%uus %s)\n", 171 data->state, data->count, ev.duration, TO_STR(ev.pulse)); 172 173 data->state = STATE_ERROR; 174 175 return -EINVAL; 176 } 177 178 /** 179 * ir_imon_encode() - Encode a scancode as a stream of raw events 180 * 181 * @protocol: protocol to encode 182 * @scancode: scancode to encode 183 * @events: array of raw ir events to write into 184 * @max: maximum size of @events 185 * 186 * Returns: The number of events written. 187 * -ENOBUFS if there isn't enough space in the array to fit the 188 * encoding. In this case all @max events will have been written. 189 */ 190 static int ir_imon_encode(enum rc_proto protocol, u32 scancode, 191 struct ir_raw_event *events, unsigned int max) 192 { 193 struct ir_raw_event *e = events; 194 int i, pulse; 195 196 if (!max--) 197 return -ENOBUFS; 198 init_ir_raw_event_duration(e, 1, IMON_UNIT); 199 200 for (i = IMON_BITS; i >= 0; i--) { 201 if (BIT(i) & IMON_CHKBITS) 202 pulse = !(scancode & (BIT(i) | BIT(i + 1))); 203 else 204 pulse = 0; 205 206 if (pulse == e->pulse) { 207 e->duration += IMON_UNIT; 208 } else { 209 if (!max--) 210 return -ENOBUFS; 211 init_ir_raw_event_duration(++e, pulse, IMON_UNIT); 212 } 213 214 pulse = !(scancode & BIT(i)); 215 216 if (pulse == e->pulse) { 217 e->duration += IMON_UNIT; 218 } else { 219 if (!max--) 220 return -ENOBUFS; 221 init_ir_raw_event_duration(++e, pulse, IMON_UNIT); 222 } 223 } 224 225 if (e->pulse) 226 e++; 227 228 return e - events; 229 } 230 231 static int ir_imon_register(struct rc_dev *dev) 232 { 233 struct imon_dec *imon = &dev->raw->imon; 234 235 imon->stick_keyboard = false; 236 237 return 0; 238 } 239 240 static struct ir_raw_handler imon_handler = { 241 .protocols = RC_PROTO_BIT_IMON, 242 .decode = ir_imon_decode, 243 .encode = ir_imon_encode, 244 .carrier = 38000, 245 .raw_register = ir_imon_register, 246 .min_timeout = IMON_UNIT * IMON_BITS * 2, 247 }; 248 249 static int __init ir_imon_decode_init(void) 250 { 251 ir_raw_handler_register(&imon_handler); 252 253 pr_info("IR iMON protocol handler initialized\n"); 254 return 0; 255 } 256 257 static void __exit ir_imon_decode_exit(void) 258 { 259 ir_raw_handler_unregister(&imon_handler); 260 } 261 262 module_init(ir_imon_decode_init); 263 module_exit(ir_imon_decode_exit); 264 265 MODULE_LICENSE("GPL"); 266 MODULE_AUTHOR("Sean Young <sean@mess.org>"); 267 MODULE_DESCRIPTION("iMON IR protocol decoder"); 268