xref: /linux/drivers/input/touchscreen/pixcir_i2c_ts.c (revision fbc872c38c8fed31948c85683b5326ee5ab9fccc)
1 /*
2  * Driver for Pixcir I2C touchscreen controllers.
3  *
4  * Copyright (C) 2010-2011 Pixcir, Inc.
5  *
6  * This software is licensed under the terms of the GNU General Public
7  * License version 2, as published by the Free Software Foundation, and
8  * may be copied, distributed, and modified under those terms.
9  *
10  * This program is distributed in the hope that it will be useful,
11  * but WITHOUT ANY WARRANTY; without even the implied warranty of
12  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
13  * GNU General Public License for more details.
14  *
15  * You should have received a copy of the GNU General Public
16  * License along with this library; if not, write to the Free Software
17  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
18  */
19 
20 #include <linux/delay.h>
21 #include <linux/module.h>
22 #include <linux/interrupt.h>
23 #include <linux/slab.h>
24 #include <linux/i2c.h>
25 #include <linux/input.h>
26 #include <linux/input/mt.h>
27 #include <linux/input/touchscreen.h>
28 #include <linux/gpio.h>
29 #include <linux/gpio/consumer.h>
30 /*#include <linux/of.h>*/
31 #include <linux/of_device.h>
32 #include <linux/platform_data/pixcir_i2c_ts.h>
33 
34 #define PIXCIR_MAX_SLOTS       5 /* Max fingers supported by driver */
35 
36 struct pixcir_i2c_ts_data {
37 	struct i2c_client *client;
38 	struct input_dev *input;
39 	struct gpio_desc *gpio_attb;
40 	struct gpio_desc *gpio_reset;
41 	struct gpio_desc *gpio_enable;
42 	struct gpio_desc *gpio_wake;
43 	const struct pixcir_i2c_chip_data *chip;
44 	int max_fingers;	/* Max fingers supported in this instance */
45 	bool running;
46 };
47 
48 struct pixcir_touch {
49 	int x;
50 	int y;
51 	int id;
52 };
53 
54 struct pixcir_report_data {
55 	int num_touches;
56 	struct pixcir_touch touches[PIXCIR_MAX_SLOTS];
57 };
58 
59 static void pixcir_ts_parse(struct pixcir_i2c_ts_data *tsdata,
60 			    struct pixcir_report_data *report)
61 {
62 	u8 rdbuf[2 + PIXCIR_MAX_SLOTS * 5];
63 	u8 wrbuf[1] = { 0 };
64 	u8 *bufptr;
65 	u8 touch;
66 	int ret, i;
67 	int readsize;
68 	const struct pixcir_i2c_chip_data *chip = tsdata->chip;
69 
70 	memset(report, 0, sizeof(struct pixcir_report_data));
71 
72 	i = chip->has_hw_ids ? 1 : 0;
73 	readsize = 2 + tsdata->max_fingers * (4 + i);
74 	if (readsize > sizeof(rdbuf))
75 		readsize = sizeof(rdbuf);
76 
77 	ret = i2c_master_send(tsdata->client, wrbuf, sizeof(wrbuf));
78 	if (ret != sizeof(wrbuf)) {
79 		dev_err(&tsdata->client->dev,
80 			"%s: i2c_master_send failed(), ret=%d\n",
81 			__func__, ret);
82 		return;
83 	}
84 
85 	ret = i2c_master_recv(tsdata->client, rdbuf, readsize);
86 	if (ret != readsize) {
87 		dev_err(&tsdata->client->dev,
88 			"%s: i2c_master_recv failed(), ret=%d\n",
89 			__func__, ret);
90 		return;
91 	}
92 
93 	touch = rdbuf[0] & 0x7;
94 	if (touch > tsdata->max_fingers)
95 		touch = tsdata->max_fingers;
96 
97 	report->num_touches = touch;
98 	bufptr = &rdbuf[2];
99 
100 	for (i = 0; i < touch; i++) {
101 		report->touches[i].x = (bufptr[1] << 8) | bufptr[0];
102 		report->touches[i].y = (bufptr[3] << 8) | bufptr[2];
103 
104 		if (chip->has_hw_ids) {
105 			report->touches[i].id = bufptr[4];
106 			bufptr = bufptr + 5;
107 		} else {
108 			bufptr = bufptr + 4;
109 		}
110 	}
111 }
112 
113 static void pixcir_ts_report(struct pixcir_i2c_ts_data *ts,
114 			     struct pixcir_report_data *report)
115 {
116 	struct input_mt_pos pos[PIXCIR_MAX_SLOTS];
117 	int slots[PIXCIR_MAX_SLOTS];
118 	struct pixcir_touch *touch;
119 	int n, i, slot;
120 	struct device *dev = &ts->client->dev;
121 	const struct pixcir_i2c_chip_data *chip = ts->chip;
122 
123 	n = report->num_touches;
124 	if (n > PIXCIR_MAX_SLOTS)
125 		n = PIXCIR_MAX_SLOTS;
126 
127 	if (!ts->chip->has_hw_ids) {
128 		for (i = 0; i < n; i++) {
129 			touch = &report->touches[i];
130 			pos[i].x = touch->x;
131 			pos[i].y = touch->y;
132 		}
133 
134 		input_mt_assign_slots(ts->input, slots, pos, n, 0);
135 	}
136 
137 	for (i = 0; i < n; i++) {
138 		touch = &report->touches[i];
139 
140 		if (chip->has_hw_ids) {
141 			slot = input_mt_get_slot_by_key(ts->input, touch->id);
142 			if (slot < 0) {
143 				dev_dbg(dev, "no free slot for id 0x%x\n",
144 					touch->id);
145 				continue;
146 			}
147 		} else {
148 			slot = slots[i];
149 		}
150 
151 		input_mt_slot(ts->input, slot);
152 		input_mt_report_slot_state(ts->input,
153 					   MT_TOOL_FINGER, true);
154 
155 		input_event(ts->input, EV_ABS, ABS_MT_POSITION_X, touch->x);
156 		input_event(ts->input, EV_ABS, ABS_MT_POSITION_Y, touch->y);
157 
158 		dev_dbg(dev, "%d: slot %d, x %d, y %d\n",
159 			i, slot, touch->x, touch->y);
160 	}
161 
162 	input_mt_sync_frame(ts->input);
163 	input_sync(ts->input);
164 }
165 
166 static irqreturn_t pixcir_ts_isr(int irq, void *dev_id)
167 {
168 	struct pixcir_i2c_ts_data *tsdata = dev_id;
169 	struct pixcir_report_data report;
170 
171 	while (tsdata->running) {
172 		/* parse packet */
173 		pixcir_ts_parse(tsdata, &report);
174 
175 		/* report it */
176 		pixcir_ts_report(tsdata, &report);
177 
178 		if (gpiod_get_value_cansleep(tsdata->gpio_attb)) {
179 			if (report.num_touches) {
180 				/*
181 				 * Last report with no finger up?
182 				 * Do it now then.
183 				 */
184 				input_mt_sync_frame(tsdata->input);
185 				input_sync(tsdata->input);
186 			}
187 			break;
188 		}
189 
190 		msleep(20);
191 	}
192 
193 	return IRQ_HANDLED;
194 }
195 
196 static void pixcir_reset(struct pixcir_i2c_ts_data *tsdata)
197 {
198 	if (!IS_ERR_OR_NULL(tsdata->gpio_reset)) {
199 		gpiod_set_value_cansleep(tsdata->gpio_reset, 1);
200 		ndelay(100);	/* datasheet section 1.2.3 says 80ns min. */
201 		gpiod_set_value_cansleep(tsdata->gpio_reset, 0);
202 		/* wait for controller ready. 100ms guess. */
203 		msleep(100);
204 	}
205 }
206 
207 static int pixcir_set_power_mode(struct pixcir_i2c_ts_data *ts,
208 				 enum pixcir_power_mode mode)
209 {
210 	struct device *dev = &ts->client->dev;
211 	int ret;
212 
213 	if (mode == PIXCIR_POWER_ACTIVE || mode == PIXCIR_POWER_IDLE) {
214 		if (ts->gpio_wake)
215 			gpiod_set_value_cansleep(ts->gpio_wake, 1);
216 	}
217 
218 	ret = i2c_smbus_read_byte_data(ts->client, PIXCIR_REG_POWER_MODE);
219 	if (ret < 0) {
220 		dev_err(dev, "%s: can't read reg 0x%x : %d\n",
221 			__func__, PIXCIR_REG_POWER_MODE, ret);
222 		return ret;
223 	}
224 
225 	ret &= ~PIXCIR_POWER_MODE_MASK;
226 	ret |= mode;
227 
228 	/* Always AUTO_IDLE */
229 	ret |= PIXCIR_POWER_ALLOW_IDLE;
230 
231 	ret = i2c_smbus_write_byte_data(ts->client, PIXCIR_REG_POWER_MODE, ret);
232 	if (ret < 0) {
233 		dev_err(dev, "%s: can't write reg 0x%x : %d\n",
234 			__func__, PIXCIR_REG_POWER_MODE, ret);
235 		return ret;
236 	}
237 
238 	if (mode == PIXCIR_POWER_HALT) {
239 		if (ts->gpio_wake)
240 			gpiod_set_value_cansleep(ts->gpio_wake, 0);
241 	}
242 
243 	return 0;
244 }
245 
246 /*
247  * Set the interrupt mode for the device i.e. ATTB line behaviour
248  *
249  * @polarity : 1 for active high, 0 for active low.
250  */
251 static int pixcir_set_int_mode(struct pixcir_i2c_ts_data *ts,
252 			       enum pixcir_int_mode mode, bool polarity)
253 {
254 	struct device *dev = &ts->client->dev;
255 	int ret;
256 
257 	ret = i2c_smbus_read_byte_data(ts->client, PIXCIR_REG_INT_MODE);
258 	if (ret < 0) {
259 		dev_err(dev, "%s: can't read reg 0x%x : %d\n",
260 			__func__, PIXCIR_REG_INT_MODE, ret);
261 		return ret;
262 	}
263 
264 	ret &= ~PIXCIR_INT_MODE_MASK;
265 	ret |= mode;
266 
267 	if (polarity)
268 		ret |= PIXCIR_INT_POL_HIGH;
269 	else
270 		ret &= ~PIXCIR_INT_POL_HIGH;
271 
272 	ret = i2c_smbus_write_byte_data(ts->client, PIXCIR_REG_INT_MODE, ret);
273 	if (ret < 0) {
274 		dev_err(dev, "%s: can't write reg 0x%x : %d\n",
275 			__func__, PIXCIR_REG_INT_MODE, ret);
276 		return ret;
277 	}
278 
279 	return 0;
280 }
281 
282 /*
283  * Enable/disable interrupt generation
284  */
285 static int pixcir_int_enable(struct pixcir_i2c_ts_data *ts, bool enable)
286 {
287 	struct device *dev = &ts->client->dev;
288 	int ret;
289 
290 	ret = i2c_smbus_read_byte_data(ts->client, PIXCIR_REG_INT_MODE);
291 	if (ret < 0) {
292 		dev_err(dev, "%s: can't read reg 0x%x : %d\n",
293 			__func__, PIXCIR_REG_INT_MODE, ret);
294 		return ret;
295 	}
296 
297 	if (enable)
298 		ret |= PIXCIR_INT_ENABLE;
299 	else
300 		ret &= ~PIXCIR_INT_ENABLE;
301 
302 	ret = i2c_smbus_write_byte_data(ts->client, PIXCIR_REG_INT_MODE, ret);
303 	if (ret < 0) {
304 		dev_err(dev, "%s: can't write reg 0x%x : %d\n",
305 			__func__, PIXCIR_REG_INT_MODE, ret);
306 		return ret;
307 	}
308 
309 	return 0;
310 }
311 
312 static int pixcir_start(struct pixcir_i2c_ts_data *ts)
313 {
314 	struct device *dev = &ts->client->dev;
315 	int error;
316 
317 	if (ts->gpio_enable) {
318 		gpiod_set_value_cansleep(ts->gpio_enable, 1);
319 		msleep(100);
320 	}
321 
322 	/* LEVEL_TOUCH interrupt with active low polarity */
323 	error = pixcir_set_int_mode(ts, PIXCIR_INT_LEVEL_TOUCH, 0);
324 	if (error) {
325 		dev_err(dev, "Failed to set interrupt mode: %d\n", error);
326 		return error;
327 	}
328 
329 	ts->running = true;
330 	mb();	/* Update status before IRQ can fire */
331 
332 	/* enable interrupt generation */
333 	error = pixcir_int_enable(ts, true);
334 	if (error) {
335 		dev_err(dev, "Failed to enable interrupt generation: %d\n",
336 			error);
337 		return error;
338 	}
339 
340 	return 0;
341 }
342 
343 static int pixcir_stop(struct pixcir_i2c_ts_data *ts)
344 {
345 	int error;
346 
347 	/* Disable interrupt generation */
348 	error = pixcir_int_enable(ts, false);
349 	if (error) {
350 		dev_err(&ts->client->dev,
351 			"Failed to disable interrupt generation: %d\n",
352 			error);
353 		return error;
354 	}
355 
356 	/* Exit ISR if running, no more report parsing */
357 	ts->running = false;
358 	mb();	/* update status before we synchronize irq */
359 
360 	/* Wait till running ISR is complete */
361 	synchronize_irq(ts->client->irq);
362 
363 	if (ts->gpio_enable)
364 		gpiod_set_value_cansleep(ts->gpio_enable, 0);
365 
366 	return 0;
367 }
368 
369 static int pixcir_input_open(struct input_dev *dev)
370 {
371 	struct pixcir_i2c_ts_data *ts = input_get_drvdata(dev);
372 
373 	return pixcir_start(ts);
374 }
375 
376 static void pixcir_input_close(struct input_dev *dev)
377 {
378 	struct pixcir_i2c_ts_data *ts = input_get_drvdata(dev);
379 
380 	pixcir_stop(ts);
381 }
382 
383 static int __maybe_unused pixcir_i2c_ts_suspend(struct device *dev)
384 {
385 	struct i2c_client *client = to_i2c_client(dev);
386 	struct pixcir_i2c_ts_data *ts = i2c_get_clientdata(client);
387 	struct input_dev *input = ts->input;
388 	int ret = 0;
389 
390 	mutex_lock(&input->mutex);
391 
392 	if (device_may_wakeup(&client->dev)) {
393 		if (!input->users) {
394 			ret = pixcir_start(ts);
395 			if (ret) {
396 				dev_err(dev, "Failed to start\n");
397 				goto unlock;
398 			}
399 		}
400 	} else if (input->users) {
401 		ret = pixcir_stop(ts);
402 	}
403 
404 unlock:
405 	mutex_unlock(&input->mutex);
406 
407 	return ret;
408 }
409 
410 static int __maybe_unused pixcir_i2c_ts_resume(struct device *dev)
411 {
412 	struct i2c_client *client = to_i2c_client(dev);
413 	struct pixcir_i2c_ts_data *ts = i2c_get_clientdata(client);
414 	struct input_dev *input = ts->input;
415 	int ret = 0;
416 
417 	mutex_lock(&input->mutex);
418 
419 	if (device_may_wakeup(&client->dev)) {
420 
421 		if (!input->users) {
422 			ret = pixcir_stop(ts);
423 			if (ret) {
424 				dev_err(dev, "Failed to stop\n");
425 				goto unlock;
426 			}
427 		}
428 	} else if (input->users) {
429 		ret = pixcir_start(ts);
430 	}
431 
432 unlock:
433 	mutex_unlock(&input->mutex);
434 
435 	return ret;
436 }
437 
438 static SIMPLE_DEV_PM_OPS(pixcir_dev_pm_ops,
439 			 pixcir_i2c_ts_suspend, pixcir_i2c_ts_resume);
440 
441 #ifdef CONFIG_OF
442 static const struct of_device_id pixcir_of_match[];
443 
444 static int pixcir_parse_dt(struct device *dev,
445 			   struct pixcir_i2c_ts_data *tsdata)
446 {
447 	const struct of_device_id *match;
448 
449 	match = of_match_device(of_match_ptr(pixcir_of_match), dev);
450 	if (!match)
451 		return -EINVAL;
452 
453 	tsdata->chip = (const struct pixcir_i2c_chip_data *)match->data;
454 	if (!tsdata->chip)
455 		return -EINVAL;
456 
457 	return 0;
458 }
459 #else
460 static int pixcir_parse_dt(struct device *dev,
461 			   struct pixcir_i2c_ts_data *tsdata)
462 {
463 	return -EINVAL;
464 }
465 #endif
466 
467 static int pixcir_i2c_ts_probe(struct i2c_client *client,
468 			       const struct i2c_device_id *id)
469 {
470 	const struct pixcir_ts_platform_data *pdata =
471 			dev_get_platdata(&client->dev);
472 	struct device *dev = &client->dev;
473 	struct pixcir_i2c_ts_data *tsdata;
474 	struct input_dev *input;
475 	int error;
476 
477 	tsdata = devm_kzalloc(dev, sizeof(*tsdata), GFP_KERNEL);
478 	if (!tsdata)
479 		return -ENOMEM;
480 
481 	if (pdata) {
482 		tsdata->chip = &pdata->chip;
483 	} else if (dev->of_node) {
484 		error = pixcir_parse_dt(dev, tsdata);
485 		if (error)
486 			return error;
487 	} else {
488 		dev_err(&client->dev, "platform data not defined\n");
489 		return -EINVAL;
490 	}
491 
492 	if (!tsdata->chip->max_fingers) {
493 		dev_err(dev, "Invalid max_fingers in chip data\n");
494 		return -EINVAL;
495 	}
496 
497 	input = devm_input_allocate_device(dev);
498 	if (!input) {
499 		dev_err(dev, "Failed to allocate input device\n");
500 		return -ENOMEM;
501 	}
502 
503 	tsdata->client = client;
504 	tsdata->input = input;
505 
506 	input->name = client->name;
507 	input->id.bustype = BUS_I2C;
508 	input->open = pixcir_input_open;
509 	input->close = pixcir_input_close;
510 	input->dev.parent = &client->dev;
511 
512 	if (pdata) {
513 		input_set_abs_params(input, ABS_MT_POSITION_X, 0, pdata->x_max, 0, 0);
514 		input_set_abs_params(input, ABS_MT_POSITION_Y, 0, pdata->y_max, 0, 0);
515 	} else {
516 		input_set_capability(input, EV_ABS, ABS_MT_POSITION_X);
517 		input_set_capability(input, EV_ABS, ABS_MT_POSITION_Y);
518 		touchscreen_parse_properties(input, true);
519 		if (!input_abs_get_max(input, ABS_MT_POSITION_X) ||
520 		    !input_abs_get_max(input, ABS_MT_POSITION_Y)) {
521 			dev_err(dev, "Touchscreen size is not specified\n");
522 			return -EINVAL;
523 		}
524 	}
525 
526 	tsdata->max_fingers = tsdata->chip->max_fingers;
527 	if (tsdata->max_fingers > PIXCIR_MAX_SLOTS) {
528 		tsdata->max_fingers = PIXCIR_MAX_SLOTS;
529 		dev_info(dev, "Limiting maximum fingers to %d\n",
530 			 tsdata->max_fingers);
531 	}
532 
533 	error = input_mt_init_slots(input, tsdata->max_fingers,
534 				    INPUT_MT_DIRECT | INPUT_MT_DROP_UNUSED);
535 	if (error) {
536 		dev_err(dev, "Error initializing Multi-Touch slots\n");
537 		return error;
538 	}
539 
540 	input_set_drvdata(input, tsdata);
541 
542 	tsdata->gpio_attb = devm_gpiod_get(dev, "attb", GPIOD_IN);
543 	if (IS_ERR(tsdata->gpio_attb)) {
544 		error = PTR_ERR(tsdata->gpio_attb);
545 		dev_err(dev, "Failed to request ATTB gpio: %d\n", error);
546 		return error;
547 	}
548 
549 	tsdata->gpio_reset = devm_gpiod_get_optional(dev, "reset",
550 						     GPIOD_OUT_LOW);
551 	if (IS_ERR(tsdata->gpio_reset)) {
552 		error = PTR_ERR(tsdata->gpio_reset);
553 		dev_err(dev, "Failed to request RESET gpio: %d\n", error);
554 		return error;
555 	}
556 
557 	tsdata->gpio_wake = devm_gpiod_get_optional(dev, "wake",
558 						    GPIOD_OUT_HIGH);
559 	if (IS_ERR(tsdata->gpio_wake)) {
560 		error = PTR_ERR(tsdata->gpio_wake);
561 		if (error != -EPROBE_DEFER)
562 			dev_err(dev, "Failed to get wake gpio: %d\n", error);
563 		return error;
564 	}
565 
566 	tsdata->gpio_enable = devm_gpiod_get_optional(dev, "enable",
567 						      GPIOD_OUT_HIGH);
568 	if (IS_ERR(tsdata->gpio_enable)) {
569 		error = PTR_ERR(tsdata->gpio_enable);
570 		if (error != -EPROBE_DEFER)
571 			dev_err(dev, "Failed to get enable gpio: %d\n", error);
572 		return error;
573 	}
574 
575 	if (tsdata->gpio_enable)
576 		msleep(100);
577 
578 	error = devm_request_threaded_irq(dev, client->irq, NULL, pixcir_ts_isr,
579 					  IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
580 					  client->name, tsdata);
581 	if (error) {
582 		dev_err(dev, "failed to request irq %d\n", client->irq);
583 		return error;
584 	}
585 
586 	pixcir_reset(tsdata);
587 
588 	/* Always be in IDLE mode to save power, device supports auto wake */
589 	error = pixcir_set_power_mode(tsdata, PIXCIR_POWER_IDLE);
590 	if (error) {
591 		dev_err(dev, "Failed to set IDLE mode\n");
592 		return error;
593 	}
594 
595 	/* Stop device till opened */
596 	error = pixcir_stop(tsdata);
597 	if (error)
598 		return error;
599 
600 	error = input_register_device(input);
601 	if (error)
602 		return error;
603 
604 	i2c_set_clientdata(client, tsdata);
605 
606 	return 0;
607 }
608 
609 static const struct i2c_device_id pixcir_i2c_ts_id[] = {
610 	{ "pixcir_ts", 0 },
611 	{ "pixcir_tangoc", 0 },
612 	{ }
613 };
614 MODULE_DEVICE_TABLE(i2c, pixcir_i2c_ts_id);
615 
616 #ifdef CONFIG_OF
617 static const struct pixcir_i2c_chip_data pixcir_ts_data = {
618 	.max_fingers = 2,
619 	/* no hw id support */
620 };
621 
622 static const struct pixcir_i2c_chip_data pixcir_tangoc_data = {
623 	.max_fingers = 5,
624 	.has_hw_ids = true,
625 };
626 
627 static const struct of_device_id pixcir_of_match[] = {
628 	{ .compatible = "pixcir,pixcir_ts", .data = &pixcir_ts_data },
629 	{ .compatible = "pixcir,pixcir_tangoc", .data = &pixcir_tangoc_data },
630 	{ }
631 };
632 MODULE_DEVICE_TABLE(of, pixcir_of_match);
633 #endif
634 
635 static struct i2c_driver pixcir_i2c_ts_driver = {
636 	.driver = {
637 		.name	= "pixcir_ts",
638 		.pm	= &pixcir_dev_pm_ops,
639 		.of_match_table = of_match_ptr(pixcir_of_match),
640 	},
641 	.probe		= pixcir_i2c_ts_probe,
642 	.id_table	= pixcir_i2c_ts_id,
643 };
644 
645 module_i2c_driver(pixcir_i2c_ts_driver);
646 
647 MODULE_AUTHOR("Jianchun Bian <jcbian@pixcir.com.cn>, Dequan Meng <dqmeng@pixcir.com.cn>");
648 MODULE_DESCRIPTION("Pixcir I2C Touchscreen Driver");
649 MODULE_LICENSE("GPL");
650