xref: /linux/drivers/input/serio/xilinx_ps2.c (revision fcc8487d477a3452a1d0ccbdd4c5e0e1e3cb8bed)
1 /*
2  * Xilinx XPS PS/2 device driver
3  *
4  * (c) 2005 MontaVista Software, Inc.
5  * (c) 2008 Xilinx, Inc.
6  *
7  * This program is free software; you can redistribute it and/or modify it
8  * under the terms of the GNU General Public License as published by the
9  * Free Software Foundation; either version 2 of the License, or (at your
10  * option) any later version.
11  *
12  * You should have received a copy of the GNU General Public License along
13  * with this program; if not, write to the Free Software Foundation, Inc.,
14  * 675 Mass Ave, Cambridge, MA 02139, USA.
15  */
16 
17 
18 #include <linux/module.h>
19 #include <linux/serio.h>
20 #include <linux/interrupt.h>
21 #include <linux/errno.h>
22 #include <linux/slab.h>
23 #include <linux/list.h>
24 #include <linux/io.h>
25 #include <linux/of_address.h>
26 #include <linux/of_device.h>
27 #include <linux/of_irq.h>
28 #include <linux/of_platform.h>
29 
30 #define DRIVER_NAME		"xilinx_ps2"
31 
32 /* Register offsets for the xps2 device */
33 #define XPS2_SRST_OFFSET	0x00000000 /* Software Reset register */
34 #define XPS2_STATUS_OFFSET	0x00000004 /* Status register */
35 #define XPS2_RX_DATA_OFFSET	0x00000008 /* Receive Data register */
36 #define XPS2_TX_DATA_OFFSET	0x0000000C /* Transmit Data register */
37 #define XPS2_GIER_OFFSET	0x0000002C /* Global Interrupt Enable reg */
38 #define XPS2_IPISR_OFFSET	0x00000030 /* Interrupt Status register */
39 #define XPS2_IPIER_OFFSET	0x00000038 /* Interrupt Enable register */
40 
41 /* Reset Register Bit Definitions */
42 #define XPS2_SRST_RESET		0x0000000A /* Software Reset  */
43 
44 /* Status Register Bit Positions */
45 #define XPS2_STATUS_RX_FULL	0x00000001 /* Receive Full  */
46 #define XPS2_STATUS_TX_FULL	0x00000002 /* Transmit Full  */
47 
48 /* Bit definitions for ISR/IER registers. Both the registers have the same bit
49  * definitions and are only defined once. */
50 #define XPS2_IPIXR_WDT_TOUT	0x00000001 /* Watchdog Timeout Interrupt */
51 #define XPS2_IPIXR_TX_NOACK	0x00000002 /* Transmit No ACK Interrupt */
52 #define XPS2_IPIXR_TX_ACK	0x00000004 /* Transmit ACK (Data) Interrupt */
53 #define XPS2_IPIXR_RX_OVF	0x00000008 /* Receive Overflow Interrupt */
54 #define XPS2_IPIXR_RX_ERR	0x00000010 /* Receive Error Interrupt */
55 #define XPS2_IPIXR_RX_FULL	0x00000020 /* Receive Data Interrupt */
56 
57 /* Mask for all the Transmit Interrupts */
58 #define XPS2_IPIXR_TX_ALL	(XPS2_IPIXR_TX_NOACK | XPS2_IPIXR_TX_ACK)
59 
60 /* Mask for all the Receive Interrupts */
61 #define XPS2_IPIXR_RX_ALL	(XPS2_IPIXR_RX_OVF | XPS2_IPIXR_RX_ERR |  \
62 				 XPS2_IPIXR_RX_FULL)
63 
64 /* Mask for all the Interrupts */
65 #define XPS2_IPIXR_ALL		(XPS2_IPIXR_TX_ALL | XPS2_IPIXR_RX_ALL |  \
66 				 XPS2_IPIXR_WDT_TOUT)
67 
68 /* Global Interrupt Enable mask */
69 #define XPS2_GIER_GIE_MASK	0x80000000
70 
71 struct xps2data {
72 	int irq;
73 	spinlock_t lock;
74 	void __iomem *base_address;	/* virt. address of control registers */
75 	unsigned int flags;
76 	struct serio *serio;		/* serio */
77 	struct device *dev;
78 };
79 
80 /************************************/
81 /* XPS PS/2 data transmission calls */
82 /************************************/
83 
84 /**
85  * xps2_recv() - attempts to receive a byte from the PS/2 port.
86  * @drvdata:	pointer to ps2 device private data structure
87  * @byte:	address where the read data will be copied
88  *
89  * If there is any data available in the PS/2 receiver, this functions reads
90  * the data, otherwise it returns error.
91  */
92 static int xps2_recv(struct xps2data *drvdata, u8 *byte)
93 {
94 	u32 sr;
95 	int status = -1;
96 
97 	/* If there is data available in the PS/2 receiver, read it */
98 	sr = in_be32(drvdata->base_address + XPS2_STATUS_OFFSET);
99 	if (sr & XPS2_STATUS_RX_FULL) {
100 		*byte = in_be32(drvdata->base_address + XPS2_RX_DATA_OFFSET);
101 		status = 0;
102 	}
103 
104 	return status;
105 }
106 
107 /*********************/
108 /* Interrupt handler */
109 /*********************/
110 static irqreturn_t xps2_interrupt(int irq, void *dev_id)
111 {
112 	struct xps2data *drvdata = dev_id;
113 	u32 intr_sr;
114 	u8 c;
115 	int status;
116 
117 	/* Get the PS/2 interrupts and clear them */
118 	intr_sr = in_be32(drvdata->base_address + XPS2_IPISR_OFFSET);
119 	out_be32(drvdata->base_address + XPS2_IPISR_OFFSET, intr_sr);
120 
121 	/* Check which interrupt is active */
122 	if (intr_sr & XPS2_IPIXR_RX_OVF)
123 		dev_warn(drvdata->dev, "receive overrun error\n");
124 
125 	if (intr_sr & XPS2_IPIXR_RX_ERR)
126 		drvdata->flags |= SERIO_PARITY;
127 
128 	if (intr_sr & (XPS2_IPIXR_TX_NOACK | XPS2_IPIXR_WDT_TOUT))
129 		drvdata->flags |= SERIO_TIMEOUT;
130 
131 	if (intr_sr & XPS2_IPIXR_RX_FULL) {
132 		status = xps2_recv(drvdata, &c);
133 
134 		/* Error, if a byte is not received */
135 		if (status) {
136 			dev_err(drvdata->dev,
137 				"wrong rcvd byte count (%d)\n", status);
138 		} else {
139 			serio_interrupt(drvdata->serio, c, drvdata->flags);
140 			drvdata->flags = 0;
141 		}
142 	}
143 
144 	return IRQ_HANDLED;
145 }
146 
147 /*******************/
148 /* serio callbacks */
149 /*******************/
150 
151 /**
152  * sxps2_write() - sends a byte out through the PS/2 port.
153  * @pserio:	pointer to the serio structure of the PS/2 port
154  * @c:		data that needs to be written to the PS/2 port
155  *
156  * This function checks if the PS/2 transmitter is empty and sends a byte.
157  * Otherwise it returns error. Transmission fails only when nothing is connected
158  * to the PS/2 port. Thats why, we do not try to resend the data in case of a
159  * failure.
160  */
161 static int sxps2_write(struct serio *pserio, unsigned char c)
162 {
163 	struct xps2data *drvdata = pserio->port_data;
164 	unsigned long flags;
165 	u32 sr;
166 	int status = -1;
167 
168 	spin_lock_irqsave(&drvdata->lock, flags);
169 
170 	/* If the PS/2 transmitter is empty send a byte of data */
171 	sr = in_be32(drvdata->base_address + XPS2_STATUS_OFFSET);
172 	if (!(sr & XPS2_STATUS_TX_FULL)) {
173 		out_be32(drvdata->base_address + XPS2_TX_DATA_OFFSET, c);
174 		status = 0;
175 	}
176 
177 	spin_unlock_irqrestore(&drvdata->lock, flags);
178 
179 	return status;
180 }
181 
182 /**
183  * sxps2_open() - called when a port is opened by the higher layer.
184  * @pserio:	pointer to the serio structure of the PS/2 device
185  *
186  * This function requests irq and enables interrupts for the PS/2 device.
187  */
188 static int sxps2_open(struct serio *pserio)
189 {
190 	struct xps2data *drvdata = pserio->port_data;
191 	int error;
192 	u8 c;
193 
194 	error = request_irq(drvdata->irq, &xps2_interrupt, 0,
195 				DRIVER_NAME, drvdata);
196 	if (error) {
197 		dev_err(drvdata->dev,
198 			"Couldn't allocate interrupt %d\n", drvdata->irq);
199 		return error;
200 	}
201 
202 	/* start reception by enabling the interrupts */
203 	out_be32(drvdata->base_address + XPS2_GIER_OFFSET, XPS2_GIER_GIE_MASK);
204 	out_be32(drvdata->base_address + XPS2_IPIER_OFFSET, XPS2_IPIXR_RX_ALL);
205 	(void)xps2_recv(drvdata, &c);
206 
207 	return 0;		/* success */
208 }
209 
210 /**
211  * sxps2_close() - frees the interrupt.
212  * @pserio:	pointer to the serio structure of the PS/2 device
213  *
214  * This function frees the irq and disables interrupts for the PS/2 device.
215  */
216 static void sxps2_close(struct serio *pserio)
217 {
218 	struct xps2data *drvdata = pserio->port_data;
219 
220 	/* Disable the PS2 interrupts */
221 	out_be32(drvdata->base_address + XPS2_GIER_OFFSET, 0x00);
222 	out_be32(drvdata->base_address + XPS2_IPIER_OFFSET, 0x00);
223 	free_irq(drvdata->irq, drvdata);
224 }
225 
226 /**
227  * xps2_of_probe - probe method for the PS/2 device.
228  * @of_dev:	pointer to OF device structure
229  * @match:	pointer to the structure used for matching a device
230  *
231  * This function probes the PS/2 device in the device tree.
232  * It initializes the driver data structure and the hardware.
233  * It returns 0, if the driver is bound to the PS/2 device, or a negative
234  * value if there is an error.
235  */
236 static int xps2_of_probe(struct platform_device *ofdev)
237 {
238 	struct resource r_mem; /* IO mem resources */
239 	struct xps2data *drvdata;
240 	struct serio *serio;
241 	struct device *dev = &ofdev->dev;
242 	resource_size_t remap_size, phys_addr;
243 	unsigned int irq;
244 	int error;
245 
246 	dev_info(dev, "Device Tree Probing \'%s\'\n", dev->of_node->name);
247 
248 	/* Get iospace for the device */
249 	error = of_address_to_resource(dev->of_node, 0, &r_mem);
250 	if (error) {
251 		dev_err(dev, "invalid address\n");
252 		return error;
253 	}
254 
255 	/* Get IRQ for the device */
256 	irq = irq_of_parse_and_map(dev->of_node, 0);
257 	if (!irq) {
258 		dev_err(dev, "no IRQ found\n");
259 		return -ENODEV;
260 	}
261 
262 	drvdata = kzalloc(sizeof(struct xps2data), GFP_KERNEL);
263 	serio = kzalloc(sizeof(struct serio), GFP_KERNEL);
264 	if (!drvdata || !serio) {
265 		error = -ENOMEM;
266 		goto failed1;
267 	}
268 
269 	spin_lock_init(&drvdata->lock);
270 	drvdata->irq = irq;
271 	drvdata->serio = serio;
272 	drvdata->dev = dev;
273 
274 	phys_addr = r_mem.start;
275 	remap_size = resource_size(&r_mem);
276 	if (!request_mem_region(phys_addr, remap_size, DRIVER_NAME)) {
277 		dev_err(dev, "Couldn't lock memory region at 0x%08llX\n",
278 			(unsigned long long)phys_addr);
279 		error = -EBUSY;
280 		goto failed1;
281 	}
282 
283 	/* Fill in configuration data and add them to the list */
284 	drvdata->base_address = ioremap(phys_addr, remap_size);
285 	if (drvdata->base_address == NULL) {
286 		dev_err(dev, "Couldn't ioremap memory at 0x%08llX\n",
287 			(unsigned long long)phys_addr);
288 		error = -EFAULT;
289 		goto failed2;
290 	}
291 
292 	/* Disable all the interrupts, just in case */
293 	out_be32(drvdata->base_address + XPS2_IPIER_OFFSET, 0);
294 
295 	/* Reset the PS2 device and abort any current transaction, to make sure
296 	 * we have the PS2 in a good state */
297 	out_be32(drvdata->base_address + XPS2_SRST_OFFSET, XPS2_SRST_RESET);
298 
299 	dev_info(dev, "Xilinx PS2 at 0x%08llX mapped to 0x%p, irq=%d\n",
300 		 (unsigned long long)phys_addr, drvdata->base_address,
301 		 drvdata->irq);
302 
303 	serio->id.type = SERIO_8042;
304 	serio->write = sxps2_write;
305 	serio->open = sxps2_open;
306 	serio->close = sxps2_close;
307 	serio->port_data = drvdata;
308 	serio->dev.parent = dev;
309 	snprintf(serio->name, sizeof(serio->name),
310 		 "Xilinx XPS PS/2 at %08llX", (unsigned long long)phys_addr);
311 	snprintf(serio->phys, sizeof(serio->phys),
312 		 "xilinxps2/serio at %08llX", (unsigned long long)phys_addr);
313 
314 	serio_register_port(serio);
315 
316 	platform_set_drvdata(ofdev, drvdata);
317 	return 0;		/* success */
318 
319 failed2:
320 	release_mem_region(phys_addr, remap_size);
321 failed1:
322 	kfree(serio);
323 	kfree(drvdata);
324 
325 	return error;
326 }
327 
328 /**
329  * xps2_of_remove - unbinds the driver from the PS/2 device.
330  * @of_dev:	pointer to OF device structure
331  *
332  * This function is called if a device is physically removed from the system or
333  * if the driver module is being unloaded. It frees any resources allocated to
334  * the device.
335  */
336 static int xps2_of_remove(struct platform_device *of_dev)
337 {
338 	struct xps2data *drvdata = platform_get_drvdata(of_dev);
339 	struct resource r_mem; /* IO mem resources */
340 
341 	serio_unregister_port(drvdata->serio);
342 	iounmap(drvdata->base_address);
343 
344 	/* Get iospace of the device */
345 	if (of_address_to_resource(of_dev->dev.of_node, 0, &r_mem))
346 		dev_err(drvdata->dev, "invalid address\n");
347 	else
348 		release_mem_region(r_mem.start, resource_size(&r_mem));
349 
350 	kfree(drvdata);
351 
352 	return 0;
353 }
354 
355 /* Match table for of_platform binding */
356 static const struct of_device_id xps2_of_match[] = {
357 	{ .compatible = "xlnx,xps-ps2-1.00.a", },
358 	{ /* end of list */ },
359 };
360 MODULE_DEVICE_TABLE(of, xps2_of_match);
361 
362 static struct platform_driver xps2_of_driver = {
363 	.driver = {
364 		.name = DRIVER_NAME,
365 		.of_match_table = xps2_of_match,
366 	},
367 	.probe		= xps2_of_probe,
368 	.remove		= xps2_of_remove,
369 };
370 module_platform_driver(xps2_of_driver);
371 
372 MODULE_AUTHOR("Xilinx, Inc.");
373 MODULE_DESCRIPTION("Xilinx XPS PS/2 driver");
374 MODULE_LICENSE("GPL");
375 
376