1 // SPDX-License-Identifier: GPL-2.0 2 /* 3 * AD8366 and similar Gain Amplifiers 4 * This driver supports the following gain amplifiers: 5 * AD8366 Dual-Digital Variable Gain Amplifier (VGA) 6 * ADA4961 BiCMOS RF Digital Gain Amplifier (DGA) 7 * ADL5240 Digitally controlled variable gain amplifier (VGA) 8 * HMC1119 0.25 dB LSB, 7-Bit, Silicon Digital Attenuator 9 * 10 * Copyright 2012-2019 Analog Devices Inc. 11 */ 12 13 #include <linux/device.h> 14 #include <linux/kernel.h> 15 #include <linux/slab.h> 16 #include <linux/sysfs.h> 17 #include <linux/spi/spi.h> 18 #include <linux/regulator/consumer.h> 19 #include <linux/gpio/consumer.h> 20 #include <linux/err.h> 21 #include <linux/module.h> 22 #include <linux/bitrev.h> 23 24 #include <linux/iio/iio.h> 25 #include <linux/iio/sysfs.h> 26 27 enum ad8366_type { 28 ID_AD8366, 29 ID_ADA4961, 30 ID_ADL5240, 31 ID_HMC1119, 32 }; 33 34 struct ad8366_info { 35 int gain_min; 36 int gain_max; 37 }; 38 39 struct ad8366_state { 40 struct spi_device *spi; 41 struct regulator *reg; 42 struct mutex lock; /* protect sensor state */ 43 struct gpio_desc *reset_gpio; 44 unsigned char ch[2]; 45 enum ad8366_type type; 46 struct ad8366_info *info; 47 /* 48 * DMA (thus cache coherency maintenance) requires the 49 * transfer buffers to live in their own cache lines. 50 */ 51 unsigned char data[2] ____cacheline_aligned; 52 }; 53 54 static struct ad8366_info ad8366_infos[] = { 55 [ID_AD8366] = { 56 .gain_min = 4500, 57 .gain_max = 20500, 58 }, 59 [ID_ADA4961] = { 60 .gain_min = -6000, 61 .gain_max = 15000, 62 }, 63 [ID_ADL5240] = { 64 .gain_min = -11500, 65 .gain_max = 20000, 66 }, 67 [ID_HMC1119] = { 68 .gain_min = -31750, 69 .gain_max = 0, 70 }, 71 }; 72 73 static int ad8366_write(struct iio_dev *indio_dev, 74 unsigned char ch_a, unsigned char ch_b) 75 { 76 struct ad8366_state *st = iio_priv(indio_dev); 77 int ret; 78 79 switch (st->type) { 80 case ID_AD8366: 81 ch_a = bitrev8(ch_a & 0x3F); 82 ch_b = bitrev8(ch_b & 0x3F); 83 84 st->data[0] = ch_b >> 4; 85 st->data[1] = (ch_b << 4) | (ch_a >> 2); 86 break; 87 case ID_ADA4961: 88 st->data[0] = ch_a & 0x1F; 89 break; 90 case ID_ADL5240: 91 st->data[0] = (ch_a & 0x3F); 92 break; 93 case ID_HMC1119: 94 st->data[0] = ch_a; 95 break; 96 } 97 98 ret = spi_write(st->spi, st->data, indio_dev->num_channels); 99 if (ret < 0) 100 dev_err(&indio_dev->dev, "write failed (%d)", ret); 101 102 return ret; 103 } 104 105 static int ad8366_read_raw(struct iio_dev *indio_dev, 106 struct iio_chan_spec const *chan, 107 int *val, 108 int *val2, 109 long m) 110 { 111 struct ad8366_state *st = iio_priv(indio_dev); 112 int ret; 113 int code, gain = 0; 114 115 mutex_lock(&st->lock); 116 switch (m) { 117 case IIO_CHAN_INFO_HARDWAREGAIN: 118 code = st->ch[chan->channel]; 119 120 switch (st->type) { 121 case ID_AD8366: 122 gain = code * 253 + 4500; 123 break; 124 case ID_ADA4961: 125 gain = 15000 - code * 1000; 126 break; 127 case ID_ADL5240: 128 gain = 20000 - 31500 + code * 500; 129 break; 130 case ID_HMC1119: 131 gain = -1 * code * 250; 132 break; 133 } 134 135 /* Values in dB */ 136 *val = gain / 1000; 137 *val2 = (gain % 1000) * 1000; 138 139 ret = IIO_VAL_INT_PLUS_MICRO_DB; 140 break; 141 default: 142 ret = -EINVAL; 143 } 144 mutex_unlock(&st->lock); 145 146 return ret; 147 }; 148 149 static int ad8366_write_raw(struct iio_dev *indio_dev, 150 struct iio_chan_spec const *chan, 151 int val, 152 int val2, 153 long mask) 154 { 155 struct ad8366_state *st = iio_priv(indio_dev); 156 struct ad8366_info *inf = st->info; 157 int code = 0, gain; 158 int ret; 159 160 /* Values in dB */ 161 if (val < 0) 162 gain = (val * 1000) - (val2 / 1000); 163 else 164 gain = (val * 1000) + (val2 / 1000); 165 166 if (gain > inf->gain_max || gain < inf->gain_min) 167 return -EINVAL; 168 169 switch (st->type) { 170 case ID_AD8366: 171 code = (gain - 4500) / 253; 172 break; 173 case ID_ADA4961: 174 code = (15000 - gain) / 1000; 175 break; 176 case ID_ADL5240: 177 code = ((gain - 500 - 20000) / 500) & 0x3F; 178 break; 179 case ID_HMC1119: 180 code = (abs(gain) / 250) & 0x7F; 181 break; 182 } 183 184 mutex_lock(&st->lock); 185 switch (mask) { 186 case IIO_CHAN_INFO_HARDWAREGAIN: 187 st->ch[chan->channel] = code; 188 ret = ad8366_write(indio_dev, st->ch[0], st->ch[1]); 189 break; 190 default: 191 ret = -EINVAL; 192 } 193 mutex_unlock(&st->lock); 194 195 return ret; 196 } 197 198 static int ad8366_write_raw_get_fmt(struct iio_dev *indio_dev, 199 struct iio_chan_spec const *chan, 200 long mask) 201 { 202 switch (mask) { 203 case IIO_CHAN_INFO_HARDWAREGAIN: 204 return IIO_VAL_INT_PLUS_MICRO_DB; 205 default: 206 return -EINVAL; 207 } 208 } 209 210 static const struct iio_info ad8366_info = { 211 .read_raw = &ad8366_read_raw, 212 .write_raw = &ad8366_write_raw, 213 .write_raw_get_fmt = &ad8366_write_raw_get_fmt, 214 }; 215 216 #define AD8366_CHAN(_channel) { \ 217 .type = IIO_VOLTAGE, \ 218 .output = 1, \ 219 .indexed = 1, \ 220 .channel = _channel, \ 221 .info_mask_separate = BIT(IIO_CHAN_INFO_HARDWAREGAIN),\ 222 } 223 224 static const struct iio_chan_spec ad8366_channels[] = { 225 AD8366_CHAN(0), 226 AD8366_CHAN(1), 227 }; 228 229 static const struct iio_chan_spec ada4961_channels[] = { 230 AD8366_CHAN(0), 231 }; 232 233 static int ad8366_probe(struct spi_device *spi) 234 { 235 struct iio_dev *indio_dev; 236 struct ad8366_state *st; 237 int ret; 238 239 indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*st)); 240 if (indio_dev == NULL) 241 return -ENOMEM; 242 243 st = iio_priv(indio_dev); 244 245 st->reg = devm_regulator_get(&spi->dev, "vcc"); 246 if (!IS_ERR(st->reg)) { 247 ret = regulator_enable(st->reg); 248 if (ret) 249 return ret; 250 } 251 252 spi_set_drvdata(spi, indio_dev); 253 mutex_init(&st->lock); 254 st->spi = spi; 255 st->type = spi_get_device_id(spi)->driver_data; 256 257 switch (st->type) { 258 case ID_AD8366: 259 indio_dev->channels = ad8366_channels; 260 indio_dev->num_channels = ARRAY_SIZE(ad8366_channels); 261 break; 262 case ID_ADA4961: 263 case ID_ADL5240: 264 case ID_HMC1119: 265 st->reset_gpio = devm_gpiod_get_optional(&spi->dev, "reset", GPIOD_OUT_HIGH); 266 if (IS_ERR(st->reset_gpio)) { 267 ret = PTR_ERR(st->reset_gpio); 268 goto error_disable_reg; 269 } 270 indio_dev->channels = ada4961_channels; 271 indio_dev->num_channels = ARRAY_SIZE(ada4961_channels); 272 break; 273 default: 274 dev_err(&spi->dev, "Invalid device ID\n"); 275 ret = -EINVAL; 276 goto error_disable_reg; 277 } 278 279 st->info = &ad8366_infos[st->type]; 280 indio_dev->name = spi_get_device_id(spi)->name; 281 indio_dev->info = &ad8366_info; 282 indio_dev->modes = INDIO_DIRECT_MODE; 283 284 ret = ad8366_write(indio_dev, 0 , 0); 285 if (ret < 0) 286 goto error_disable_reg; 287 288 ret = iio_device_register(indio_dev); 289 if (ret) 290 goto error_disable_reg; 291 292 return 0; 293 294 error_disable_reg: 295 if (!IS_ERR(st->reg)) 296 regulator_disable(st->reg); 297 298 return ret; 299 } 300 301 static void ad8366_remove(struct spi_device *spi) 302 { 303 struct iio_dev *indio_dev = spi_get_drvdata(spi); 304 struct ad8366_state *st = iio_priv(indio_dev); 305 struct regulator *reg = st->reg; 306 307 iio_device_unregister(indio_dev); 308 309 if (!IS_ERR(reg)) 310 regulator_disable(reg); 311 } 312 313 static const struct spi_device_id ad8366_id[] = { 314 {"ad8366", ID_AD8366}, 315 {"ada4961", ID_ADA4961}, 316 {"adl5240", ID_ADL5240}, 317 {"hmc1119", ID_HMC1119}, 318 {} 319 }; 320 MODULE_DEVICE_TABLE(spi, ad8366_id); 321 322 static struct spi_driver ad8366_driver = { 323 .driver = { 324 .name = KBUILD_MODNAME, 325 }, 326 .probe = ad8366_probe, 327 .remove = ad8366_remove, 328 .id_table = ad8366_id, 329 }; 330 331 module_spi_driver(ad8366_driver); 332 333 MODULE_AUTHOR("Michael Hennerich <michael.hennerich@analog.com>"); 334 MODULE_DESCRIPTION("Analog Devices AD8366 and similar Gain Amplifiers"); 335 MODULE_LICENSE("GPL v2"); 336