1 // SPDX-License-Identifier: GPL-2.0-only 2 /* 3 * Copyright (C) 2017 Linus Walleij <linus.walleij@linaro.org> 4 * Parts of this file were based on sources as follows: 5 * 6 * Copyright (C) 2006-2008 Intel Corporation 7 * Copyright (C) 2007 Amos Lee <amos_lee@storlinksemi.com> 8 * Copyright (C) 2007 Dave Airlie <airlied@linux.ie> 9 * Copyright (C) 2011 Texas Instruments 10 * Copyright (C) 2017 Eric Anholt 11 */ 12 13 /** 14 * DOC: Faraday TV Encoder TVE200 DRM Driver 15 * 16 * The Faraday TV Encoder TVE200 is also known as the Gemini TV Interface 17 * Controller (TVC) and is found in the Gemini Chipset from Storlink 18 * Semiconductor (later Storm Semiconductor, later Cortina Systems) 19 * but also in the Grain Media GM8180 chipset. On the Gemini the module 20 * is connected to 8 data lines and a single clock line, comprising an 21 * 8-bit BT.656 interface. 22 * 23 * This is a very basic YUV display driver. The datasheet specifies that 24 * it supports the ITU BT.656 standard. It requires a 27 MHz clock which is 25 * the hallmark of any TV encoder supporting both PAL and NTSC. 26 * 27 * This driver exposes a standard KMS interface for this TV encoder. 28 */ 29 30 #include <linux/clk.h> 31 #include <linux/dma-buf.h> 32 #include <linux/irq.h> 33 #include <linux/io.h> 34 #include <linux/module.h> 35 #include <linux/platform_device.h> 36 #include <linux/shmem_fs.h> 37 #include <linux/slab.h> 38 39 #include <drm/drm_atomic_helper.h> 40 #include <drm/drm_bridge.h> 41 #include <drm/drm_drv.h> 42 #include <drm/drm_fb_cma_helper.h> 43 #include <drm/drm_fb_helper.h> 44 #include <drm/drm_gem_cma_helper.h> 45 #include <drm/drm_gem_framebuffer_helper.h> 46 #include <drm/drm_module.h> 47 #include <drm/drm_of.h> 48 #include <drm/drm_panel.h> 49 #include <drm/drm_probe_helper.h> 50 #include <drm/drm_vblank.h> 51 52 #include "tve200_drm.h" 53 54 #define DRIVER_DESC "DRM module for Faraday TVE200" 55 56 static const struct drm_mode_config_funcs mode_config_funcs = { 57 .fb_create = drm_gem_fb_create, 58 .atomic_check = drm_atomic_helper_check, 59 .atomic_commit = drm_atomic_helper_commit, 60 }; 61 62 static int tve200_modeset_init(struct drm_device *dev) 63 { 64 struct drm_mode_config *mode_config; 65 struct tve200_drm_dev_private *priv = dev->dev_private; 66 struct drm_panel *panel; 67 struct drm_bridge *bridge; 68 int ret = 0; 69 70 drm_mode_config_init(dev); 71 mode_config = &dev->mode_config; 72 mode_config->funcs = &mode_config_funcs; 73 mode_config->min_width = 352; 74 mode_config->max_width = 720; 75 mode_config->min_height = 240; 76 mode_config->max_height = 576; 77 78 ret = drm_of_find_panel_or_bridge(dev->dev->of_node, 79 0, 0, &panel, &bridge); 80 if (ret && ret != -ENODEV) 81 return ret; 82 if (panel) { 83 bridge = drm_panel_bridge_add_typed(panel, 84 DRM_MODE_CONNECTOR_Unknown); 85 if (IS_ERR(bridge)) { 86 ret = PTR_ERR(bridge); 87 goto out_bridge; 88 } 89 } else { 90 /* 91 * TODO: when we are using a different bridge than a panel 92 * (such as a dumb VGA connector) we need to devise a different 93 * method to get the connector out of the bridge. 94 */ 95 dev_err(dev->dev, "the bridge is not a panel\n"); 96 goto out_bridge; 97 } 98 99 ret = tve200_display_init(dev); 100 if (ret) { 101 dev_err(dev->dev, "failed to init display\n"); 102 goto out_bridge; 103 } 104 105 ret = drm_simple_display_pipe_attach_bridge(&priv->pipe, 106 bridge); 107 if (ret) { 108 dev_err(dev->dev, "failed to attach bridge\n"); 109 goto out_bridge; 110 } 111 112 priv->panel = panel; 113 priv->connector = drm_panel_bridge_connector(bridge); 114 priv->bridge = bridge; 115 116 dev_info(dev->dev, "attached to panel %s\n", 117 dev_name(panel->dev)); 118 119 ret = drm_vblank_init(dev, 1); 120 if (ret) { 121 dev_err(dev->dev, "failed to init vblank\n"); 122 goto out_bridge; 123 } 124 125 drm_mode_config_reset(dev); 126 drm_kms_helper_poll_init(dev); 127 128 goto finish; 129 130 out_bridge: 131 if (panel) 132 drm_panel_bridge_remove(bridge); 133 drm_mode_config_cleanup(dev); 134 finish: 135 return ret; 136 } 137 138 DEFINE_DRM_GEM_CMA_FOPS(drm_fops); 139 140 static const struct drm_driver tve200_drm_driver = { 141 .driver_features = DRIVER_MODESET | DRIVER_GEM | DRIVER_ATOMIC, 142 .ioctls = NULL, 143 .fops = &drm_fops, 144 .name = "tve200", 145 .desc = DRIVER_DESC, 146 .date = "20170703", 147 .major = 1, 148 .minor = 0, 149 .patchlevel = 0, 150 DRM_GEM_CMA_DRIVER_OPS, 151 }; 152 153 static int tve200_probe(struct platform_device *pdev) 154 { 155 struct device *dev = &pdev->dev; 156 struct tve200_drm_dev_private *priv; 157 struct drm_device *drm; 158 struct resource *res; 159 int irq; 160 int ret; 161 162 priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); 163 if (!priv) 164 return -ENOMEM; 165 166 drm = drm_dev_alloc(&tve200_drm_driver, dev); 167 if (IS_ERR(drm)) 168 return PTR_ERR(drm); 169 platform_set_drvdata(pdev, drm); 170 priv->drm = drm; 171 drm->dev_private = priv; 172 173 /* Clock the silicon so we can access the registers */ 174 priv->pclk = devm_clk_get(dev, "PCLK"); 175 if (IS_ERR(priv->pclk)) { 176 dev_err(dev, "unable to get PCLK\n"); 177 ret = PTR_ERR(priv->pclk); 178 goto dev_unref; 179 } 180 ret = clk_prepare_enable(priv->pclk); 181 if (ret) { 182 dev_err(dev, "failed to enable PCLK\n"); 183 goto dev_unref; 184 } 185 186 /* This clock is for the pixels (27MHz) */ 187 priv->clk = devm_clk_get(dev, "TVE"); 188 if (IS_ERR(priv->clk)) { 189 dev_err(dev, "unable to get TVE clock\n"); 190 ret = PTR_ERR(priv->clk); 191 goto clk_disable; 192 } 193 194 res = platform_get_resource(pdev, IORESOURCE_MEM, 0); 195 priv->regs = devm_ioremap_resource(dev, res); 196 if (IS_ERR(priv->regs)) { 197 dev_err(dev, "%s failed mmio\n", __func__); 198 ret = -EINVAL; 199 goto clk_disable; 200 } 201 202 irq = platform_get_irq(pdev, 0); 203 if (irq < 0) { 204 ret = irq; 205 goto clk_disable; 206 } 207 208 /* turn off interrupts before requesting the irq */ 209 writel(0, priv->regs + TVE200_INT_EN); 210 211 ret = devm_request_irq(dev, irq, tve200_irq, 0, "tve200", priv); 212 if (ret) { 213 dev_err(dev, "failed to request irq %d\n", ret); 214 goto clk_disable; 215 } 216 217 ret = tve200_modeset_init(drm); 218 if (ret) 219 goto clk_disable; 220 221 ret = drm_dev_register(drm, 0); 222 if (ret < 0) 223 goto clk_disable; 224 225 /* 226 * Passing in 16 here will make the RGB565 mode the default 227 * Passing in 32 will use XRGB8888 mode 228 */ 229 drm_fbdev_generic_setup(drm, 16); 230 231 return 0; 232 233 clk_disable: 234 clk_disable_unprepare(priv->pclk); 235 dev_unref: 236 drm_dev_put(drm); 237 return ret; 238 } 239 240 static int tve200_remove(struct platform_device *pdev) 241 { 242 struct drm_device *drm = platform_get_drvdata(pdev); 243 struct tve200_drm_dev_private *priv = drm->dev_private; 244 245 drm_dev_unregister(drm); 246 if (priv->panel) 247 drm_panel_bridge_remove(priv->bridge); 248 drm_mode_config_cleanup(drm); 249 clk_disable_unprepare(priv->pclk); 250 drm_dev_put(drm); 251 252 return 0; 253 } 254 255 static const struct of_device_id tve200_of_match[] = { 256 { 257 .compatible = "faraday,tve200", 258 }, 259 {}, 260 }; 261 262 static struct platform_driver tve200_driver = { 263 .driver = { 264 .name = "tve200", 265 .of_match_table = of_match_ptr(tve200_of_match), 266 }, 267 .probe = tve200_probe, 268 .remove = tve200_remove, 269 }; 270 drm_module_platform_driver(tve200_driver); 271 272 MODULE_DESCRIPTION(DRIVER_DESC); 273 MODULE_AUTHOR("Linus Walleij <linus.walleij@linaro.org>"); 274 MODULE_LICENSE("GPL"); 275