xref: /linux/drivers/gpu/drm/nouveau/nouveau_connector.c (revision e5a52fd2b8cdb700b3c07b030e050a49ef3156b9)
1 /*
2  * Copyright (C) 2008 Maarten Maathuis.
3  * All Rights Reserved.
4  *
5  * Permission is hereby granted, free of charge, to any person obtaining
6  * a copy of this software and associated documentation files (the
7  * "Software"), to deal in the Software without restriction, including
8  * without limitation the rights to use, copy, modify, merge, publish,
9  * distribute, sublicense, and/or sell copies of the Software, and to
10  * permit persons to whom the Software is furnished to do so, subject to
11  * the following conditions:
12  *
13  * The above copyright notice and this permission notice (including the
14  * next paragraph) shall be included in all copies or substantial
15  * portions of the Software.
16  *
17  * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
18  * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
19  * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
20  * IN NO EVENT SHALL THE COPYRIGHT OWNER(S) AND/OR ITS SUPPLIERS BE
21  * LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION
22  * OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION
23  * WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
24  *
25  */
26 
27 #include <acpi/button.h>
28 
29 #include <linux/pm_runtime.h>
30 #include <linux/vga_switcheroo.h>
31 
32 #include <drm/drm_atomic_helper.h>
33 #include <drm/drm_edid.h>
34 #include <drm/drm_crtc_helper.h>
35 #include <drm/drm_probe_helper.h>
36 #include <drm/drm_atomic.h>
37 
38 #include "nouveau_reg.h"
39 #include "nouveau_drv.h"
40 #include "dispnv04/hw.h"
41 #include "dispnv50/disp.h"
42 #include "nouveau_acpi.h"
43 
44 #include "nouveau_display.h"
45 #include "nouveau_connector.h"
46 #include "nouveau_encoder.h"
47 #include "nouveau_crtc.h"
48 
49 #include <nvif/class.h>
50 #include <nvif/cl0046.h>
51 #include <nvif/event.h>
52 
53 struct drm_display_mode *
54 nouveau_conn_native_mode(struct drm_connector *connector)
55 {
56 	const struct drm_connector_helper_funcs *helper = connector->helper_private;
57 	struct nouveau_drm *drm = nouveau_drm(connector->dev);
58 	struct drm_device *dev = connector->dev;
59 	struct drm_display_mode *mode, *largest = NULL;
60 	int high_w = 0, high_h = 0, high_v = 0;
61 
62 	list_for_each_entry(mode, &connector->probed_modes, head) {
63 		mode->vrefresh = drm_mode_vrefresh(mode);
64 		if (helper->mode_valid(connector, mode) != MODE_OK ||
65 		    (mode->flags & DRM_MODE_FLAG_INTERLACE))
66 			continue;
67 
68 		/* Use preferred mode if there is one.. */
69 		if (mode->type & DRM_MODE_TYPE_PREFERRED) {
70 			NV_DEBUG(drm, "native mode from preferred\n");
71 			return drm_mode_duplicate(dev, mode);
72 		}
73 
74 		/* Otherwise, take the resolution with the largest width, then
75 		 * height, then vertical refresh
76 		 */
77 		if (mode->hdisplay < high_w)
78 			continue;
79 
80 		if (mode->hdisplay == high_w && mode->vdisplay < high_h)
81 			continue;
82 
83 		if (mode->hdisplay == high_w && mode->vdisplay == high_h &&
84 		    mode->vrefresh < high_v)
85 			continue;
86 
87 		high_w = mode->hdisplay;
88 		high_h = mode->vdisplay;
89 		high_v = mode->vrefresh;
90 		largest = mode;
91 	}
92 
93 	NV_DEBUG(drm, "native mode from largest: %dx%d@%d\n",
94 		      high_w, high_h, high_v);
95 	return largest ? drm_mode_duplicate(dev, largest) : NULL;
96 }
97 
98 int
99 nouveau_conn_atomic_get_property(struct drm_connector *connector,
100 				 const struct drm_connector_state *state,
101 				 struct drm_property *property, u64 *val)
102 {
103 	struct nouveau_conn_atom *asyc = nouveau_conn_atom(state);
104 	struct nouveau_display *disp = nouveau_display(connector->dev);
105 	struct drm_device *dev = connector->dev;
106 
107 	if (property == dev->mode_config.scaling_mode_property)
108 		*val = asyc->scaler.mode;
109 	else if (property == disp->underscan_property)
110 		*val = asyc->scaler.underscan.mode;
111 	else if (property == disp->underscan_hborder_property)
112 		*val = asyc->scaler.underscan.hborder;
113 	else if (property == disp->underscan_vborder_property)
114 		*val = asyc->scaler.underscan.vborder;
115 	else if (property == disp->dithering_mode)
116 		*val = asyc->dither.mode;
117 	else if (property == disp->dithering_depth)
118 		*val = asyc->dither.depth;
119 	else if (property == disp->vibrant_hue_property)
120 		*val = asyc->procamp.vibrant_hue;
121 	else if (property == disp->color_vibrance_property)
122 		*val = asyc->procamp.color_vibrance;
123 	else
124 		return -EINVAL;
125 
126 	return 0;
127 }
128 
129 int
130 nouveau_conn_atomic_set_property(struct drm_connector *connector,
131 				 struct drm_connector_state *state,
132 				 struct drm_property *property, u64 val)
133 {
134 	struct drm_device *dev = connector->dev;
135 	struct nouveau_conn_atom *asyc = nouveau_conn_atom(state);
136 	struct nouveau_display *disp = nouveau_display(dev);
137 
138 	if (property == dev->mode_config.scaling_mode_property) {
139 		switch (val) {
140 		case DRM_MODE_SCALE_NONE:
141 			/* We allow 'None' for EDID modes, even on a fixed
142 			 * panel (some exist with support for lower refresh
143 			 * rates, which people might want to use for power-
144 			 * saving purposes).
145 			 *
146 			 * Non-EDID modes will force the use of GPU scaling
147 			 * to the native mode regardless of this setting.
148 			 */
149 			switch (connector->connector_type) {
150 			case DRM_MODE_CONNECTOR_LVDS:
151 			case DRM_MODE_CONNECTOR_eDP:
152 				/* ... except prior to G80, where the code
153 				 * doesn't support such things.
154 				 */
155 				if (disp->disp.object.oclass < NV50_DISP)
156 					return -EINVAL;
157 				break;
158 			default:
159 				break;
160 			}
161 		case DRM_MODE_SCALE_FULLSCREEN:
162 		case DRM_MODE_SCALE_CENTER:
163 		case DRM_MODE_SCALE_ASPECT:
164 			break;
165 		default:
166 			return -EINVAL;
167 		}
168 
169 		if (asyc->scaler.mode != val) {
170 			asyc->scaler.mode = val;
171 			asyc->set.scaler = true;
172 		}
173 	} else
174 	if (property == disp->underscan_property) {
175 		if (asyc->scaler.underscan.mode != val) {
176 			asyc->scaler.underscan.mode = val;
177 			asyc->set.scaler = true;
178 		}
179 	} else
180 	if (property == disp->underscan_hborder_property) {
181 		if (asyc->scaler.underscan.hborder != val) {
182 			asyc->scaler.underscan.hborder = val;
183 			asyc->set.scaler = true;
184 		}
185 	} else
186 	if (property == disp->underscan_vborder_property) {
187 		if (asyc->scaler.underscan.vborder != val) {
188 			asyc->scaler.underscan.vborder = val;
189 			asyc->set.scaler = true;
190 		}
191 	} else
192 	if (property == disp->dithering_mode) {
193 		if (asyc->dither.mode != val) {
194 			asyc->dither.mode = val;
195 			asyc->set.dither = true;
196 		}
197 	} else
198 	if (property == disp->dithering_depth) {
199 		if (asyc->dither.mode != val) {
200 			asyc->dither.depth = val;
201 			asyc->set.dither = true;
202 		}
203 	} else
204 	if (property == disp->vibrant_hue_property) {
205 		if (asyc->procamp.vibrant_hue != val) {
206 			asyc->procamp.vibrant_hue = val;
207 			asyc->set.procamp = true;
208 		}
209 	} else
210 	if (property == disp->color_vibrance_property) {
211 		if (asyc->procamp.color_vibrance != val) {
212 			asyc->procamp.color_vibrance = val;
213 			asyc->set.procamp = true;
214 		}
215 	} else {
216 		return -EINVAL;
217 	}
218 
219 	return 0;
220 }
221 
222 void
223 nouveau_conn_atomic_destroy_state(struct drm_connector *connector,
224 				  struct drm_connector_state *state)
225 {
226 	struct nouveau_conn_atom *asyc = nouveau_conn_atom(state);
227 	__drm_atomic_helper_connector_destroy_state(&asyc->state);
228 	kfree(asyc);
229 }
230 
231 struct drm_connector_state *
232 nouveau_conn_atomic_duplicate_state(struct drm_connector *connector)
233 {
234 	struct nouveau_conn_atom *armc = nouveau_conn_atom(connector->state);
235 	struct nouveau_conn_atom *asyc;
236 	if (!(asyc = kmalloc(sizeof(*asyc), GFP_KERNEL)))
237 		return NULL;
238 	__drm_atomic_helper_connector_duplicate_state(connector, &asyc->state);
239 	asyc->dither = armc->dither;
240 	asyc->scaler = armc->scaler;
241 	asyc->procamp = armc->procamp;
242 	asyc->set.mask = 0;
243 	return &asyc->state;
244 }
245 
246 void
247 nouveau_conn_reset(struct drm_connector *connector)
248 {
249 	struct nouveau_connector *nv_connector = nouveau_connector(connector);
250 	struct nouveau_conn_atom *asyc;
251 
252 	if (drm_drv_uses_atomic_modeset(connector->dev)) {
253 		if (WARN_ON(!(asyc = kzalloc(sizeof(*asyc), GFP_KERNEL))))
254 			return;
255 
256 		if (connector->state)
257 			nouveau_conn_atomic_destroy_state(connector,
258 							  connector->state);
259 
260 		__drm_atomic_helper_connector_reset(connector, &asyc->state);
261 	} else {
262 		asyc = &nv_connector->properties_state;
263 	}
264 
265 	asyc->dither.mode = DITHERING_MODE_AUTO;
266 	asyc->dither.depth = DITHERING_DEPTH_AUTO;
267 	asyc->scaler.mode = DRM_MODE_SCALE_NONE;
268 	asyc->scaler.underscan.mode = UNDERSCAN_OFF;
269 	asyc->procamp.color_vibrance = 150;
270 	asyc->procamp.vibrant_hue = 90;
271 
272 	if (nouveau_display(connector->dev)->disp.object.oclass < NV50_DISP) {
273 		switch (connector->connector_type) {
274 		case DRM_MODE_CONNECTOR_LVDS:
275 			/* See note in nouveau_conn_atomic_set_property(). */
276 			asyc->scaler.mode = DRM_MODE_SCALE_FULLSCREEN;
277 			break;
278 		default:
279 			break;
280 		}
281 	}
282 }
283 
284 void
285 nouveau_conn_attach_properties(struct drm_connector *connector)
286 {
287 	struct drm_device *dev = connector->dev;
288 	struct nouveau_display *disp = nouveau_display(dev);
289 	struct nouveau_connector *nv_connector = nouveau_connector(connector);
290 	struct nouveau_conn_atom *armc;
291 
292 	if (drm_drv_uses_atomic_modeset(connector->dev))
293 		armc = nouveau_conn_atom(connector->state);
294 	else
295 		armc = &nv_connector->properties_state;
296 
297 	/* Init DVI-I specific properties. */
298 	if (connector->connector_type == DRM_MODE_CONNECTOR_DVII)
299 		drm_object_attach_property(&connector->base, dev->mode_config.
300 					   dvi_i_subconnector_property, 0);
301 
302 	/* Add overscan compensation options to digital outputs. */
303 	if (disp->underscan_property &&
304 	    (connector->connector_type == DRM_MODE_CONNECTOR_DVID ||
305 	     connector->connector_type == DRM_MODE_CONNECTOR_DVII ||
306 	     connector->connector_type == DRM_MODE_CONNECTOR_HDMIA ||
307 	     connector->connector_type == DRM_MODE_CONNECTOR_DisplayPort)) {
308 		drm_object_attach_property(&connector->base,
309 					   disp->underscan_property,
310 					   UNDERSCAN_OFF);
311 		drm_object_attach_property(&connector->base,
312 					   disp->underscan_hborder_property, 0);
313 		drm_object_attach_property(&connector->base,
314 					   disp->underscan_vborder_property, 0);
315 	}
316 
317 	/* Add hue and saturation options. */
318 	if (disp->vibrant_hue_property)
319 		drm_object_attach_property(&connector->base,
320 					   disp->vibrant_hue_property,
321 					   armc->procamp.vibrant_hue);
322 	if (disp->color_vibrance_property)
323 		drm_object_attach_property(&connector->base,
324 					   disp->color_vibrance_property,
325 					   armc->procamp.color_vibrance);
326 
327 	/* Scaling mode property. */
328 	switch (connector->connector_type) {
329 	case DRM_MODE_CONNECTOR_TV:
330 		break;
331 	case DRM_MODE_CONNECTOR_VGA:
332 		if (disp->disp.object.oclass < NV50_DISP)
333 			break; /* Can only scale on DFPs. */
334 		/* Fall-through. */
335 	default:
336 		drm_object_attach_property(&connector->base, dev->mode_config.
337 					   scaling_mode_property,
338 					   armc->scaler.mode);
339 		break;
340 	}
341 
342 	/* Dithering properties. */
343 	switch (connector->connector_type) {
344 	case DRM_MODE_CONNECTOR_TV:
345 	case DRM_MODE_CONNECTOR_VGA:
346 		break;
347 	default:
348 		if (disp->dithering_mode) {
349 			drm_object_attach_property(&connector->base,
350 						   disp->dithering_mode,
351 						   armc->dither.mode);
352 		}
353 		if (disp->dithering_depth) {
354 			drm_object_attach_property(&connector->base,
355 						   disp->dithering_depth,
356 						   armc->dither.depth);
357 		}
358 		break;
359 	}
360 }
361 
362 MODULE_PARM_DESC(tv_disable, "Disable TV-out detection");
363 int nouveau_tv_disable = 0;
364 module_param_named(tv_disable, nouveau_tv_disable, int, 0400);
365 
366 MODULE_PARM_DESC(ignorelid, "Ignore ACPI lid status");
367 int nouveau_ignorelid = 0;
368 module_param_named(ignorelid, nouveau_ignorelid, int, 0400);
369 
370 MODULE_PARM_DESC(duallink, "Allow dual-link TMDS (default: enabled)");
371 int nouveau_duallink = 1;
372 module_param_named(duallink, nouveau_duallink, int, 0400);
373 
374 MODULE_PARM_DESC(hdmimhz, "Force a maximum HDMI pixel clock (in MHz)");
375 int nouveau_hdmimhz = 0;
376 module_param_named(hdmimhz, nouveau_hdmimhz, int, 0400);
377 
378 struct nouveau_encoder *
379 find_encoder(struct drm_connector *connector, int type)
380 {
381 	struct nouveau_encoder *nv_encoder;
382 	struct drm_encoder *enc;
383 
384 	drm_connector_for_each_possible_encoder(connector, enc) {
385 		nv_encoder = nouveau_encoder(enc);
386 
387 		if (type == DCB_OUTPUT_ANY ||
388 		    (nv_encoder->dcb && nv_encoder->dcb->type == type))
389 			return nv_encoder;
390 	}
391 
392 	return NULL;
393 }
394 
395 struct nouveau_connector *
396 nouveau_encoder_connector_get(struct nouveau_encoder *encoder)
397 {
398 	struct drm_device *dev = to_drm_encoder(encoder)->dev;
399 	struct drm_connector *drm_connector;
400 
401 	list_for_each_entry(drm_connector, &dev->mode_config.connector_list, head) {
402 		if (drm_connector->encoder == to_drm_encoder(encoder))
403 			return nouveau_connector(drm_connector);
404 	}
405 
406 	return NULL;
407 }
408 
409 static void
410 nouveau_connector_destroy(struct drm_connector *connector)
411 {
412 	struct nouveau_connector *nv_connector = nouveau_connector(connector);
413 	nvif_notify_fini(&nv_connector->hpd);
414 	kfree(nv_connector->edid);
415 	drm_connector_unregister(connector);
416 	drm_connector_cleanup(connector);
417 	if (nv_connector->aux.transfer) {
418 		drm_dp_cec_unregister_connector(&nv_connector->aux);
419 		drm_dp_aux_unregister(&nv_connector->aux);
420 		kfree(nv_connector->aux.name);
421 	}
422 	kfree(connector);
423 }
424 
425 static struct nouveau_encoder *
426 nouveau_connector_ddc_detect(struct drm_connector *connector)
427 {
428 	struct drm_device *dev = connector->dev;
429 	struct nouveau_encoder *nv_encoder = NULL, *found = NULL;
430 	struct drm_encoder *encoder;
431 	int ret;
432 	bool switcheroo_ddc = false;
433 
434 	drm_connector_for_each_possible_encoder(connector, encoder) {
435 		nv_encoder = nouveau_encoder(encoder);
436 
437 		switch (nv_encoder->dcb->type) {
438 		case DCB_OUTPUT_DP:
439 			ret = nouveau_dp_detect(nv_encoder);
440 			if (ret == NOUVEAU_DP_MST)
441 				return NULL;
442 			else if (ret == NOUVEAU_DP_SST)
443 				found = nv_encoder;
444 
445 			break;
446 		case DCB_OUTPUT_LVDS:
447 			switcheroo_ddc = !!(vga_switcheroo_handler_flags() &
448 					    VGA_SWITCHEROO_CAN_SWITCH_DDC);
449 		/* fall-through */
450 		default:
451 			if (!nv_encoder->i2c)
452 				break;
453 
454 			if (switcheroo_ddc)
455 				vga_switcheroo_lock_ddc(dev->pdev);
456 			if (nvkm_probe_i2c(nv_encoder->i2c, 0x50))
457 				found = nv_encoder;
458 			if (switcheroo_ddc)
459 				vga_switcheroo_unlock_ddc(dev->pdev);
460 
461 			break;
462 		}
463 		if (found)
464 			break;
465 	}
466 
467 	return found;
468 }
469 
470 static struct nouveau_encoder *
471 nouveau_connector_of_detect(struct drm_connector *connector)
472 {
473 #ifdef __powerpc__
474 	struct drm_device *dev = connector->dev;
475 	struct nouveau_connector *nv_connector = nouveau_connector(connector);
476 	struct nouveau_encoder *nv_encoder;
477 	struct device_node *cn, *dn = pci_device_to_OF_node(dev->pdev);
478 
479 	if (!dn ||
480 	    !((nv_encoder = find_encoder(connector, DCB_OUTPUT_TMDS)) ||
481 	      (nv_encoder = find_encoder(connector, DCB_OUTPUT_ANALOG))))
482 		return NULL;
483 
484 	for_each_child_of_node(dn, cn) {
485 		const char *name = of_get_property(cn, "name", NULL);
486 		const void *edid = of_get_property(cn, "EDID", NULL);
487 		int idx = name ? name[strlen(name) - 1] - 'A' : 0;
488 
489 		if (nv_encoder->dcb->i2c_index == idx && edid) {
490 			nv_connector->edid =
491 				kmemdup(edid, EDID_LENGTH, GFP_KERNEL);
492 			of_node_put(cn);
493 			return nv_encoder;
494 		}
495 	}
496 #endif
497 	return NULL;
498 }
499 
500 static void
501 nouveau_connector_set_encoder(struct drm_connector *connector,
502 			      struct nouveau_encoder *nv_encoder)
503 {
504 	struct nouveau_connector *nv_connector = nouveau_connector(connector);
505 	struct nouveau_drm *drm = nouveau_drm(connector->dev);
506 	struct drm_device *dev = connector->dev;
507 
508 	if (nv_connector->detected_encoder == nv_encoder)
509 		return;
510 	nv_connector->detected_encoder = nv_encoder;
511 
512 	if (drm->client.device.info.family >= NV_DEVICE_INFO_V0_TESLA) {
513 		if (nv_encoder->dcb->type == DCB_OUTPUT_DP)
514 			connector->interlace_allowed =
515 				nv_encoder->caps.dp_interlace;
516 		else
517 			connector->interlace_allowed = true;
518 		connector->doublescan_allowed = true;
519 	} else
520 	if (nv_encoder->dcb->type == DCB_OUTPUT_LVDS ||
521 	    nv_encoder->dcb->type == DCB_OUTPUT_TMDS) {
522 		connector->doublescan_allowed = false;
523 		connector->interlace_allowed = false;
524 	} else {
525 		connector->doublescan_allowed = true;
526 		if (drm->client.device.info.family == NV_DEVICE_INFO_V0_KELVIN ||
527 		    (drm->client.device.info.family == NV_DEVICE_INFO_V0_CELSIUS &&
528 		     (dev->pdev->device & 0x0ff0) != 0x0100 &&
529 		     (dev->pdev->device & 0x0ff0) != 0x0150))
530 			/* HW is broken */
531 			connector->interlace_allowed = false;
532 		else
533 			connector->interlace_allowed = true;
534 	}
535 
536 	if (nv_connector->type == DCB_CONNECTOR_DVI_I) {
537 		drm_object_property_set_value(&connector->base,
538 			dev->mode_config.dvi_i_subconnector_property,
539 			nv_encoder->dcb->type == DCB_OUTPUT_TMDS ?
540 			DRM_MODE_SUBCONNECTOR_DVID :
541 			DRM_MODE_SUBCONNECTOR_DVIA);
542 	}
543 }
544 
545 static enum drm_connector_status
546 nouveau_connector_detect(struct drm_connector *connector, bool force)
547 {
548 	struct drm_device *dev = connector->dev;
549 	struct nouveau_drm *drm = nouveau_drm(dev);
550 	struct nouveau_connector *nv_connector = nouveau_connector(connector);
551 	struct nouveau_encoder *nv_encoder = NULL;
552 	struct nouveau_encoder *nv_partner;
553 	struct i2c_adapter *i2c;
554 	int type;
555 	int ret;
556 	enum drm_connector_status conn_status = connector_status_disconnected;
557 
558 	/* Cleanup the previous EDID block. */
559 	if (nv_connector->edid) {
560 		drm_connector_update_edid_property(connector, NULL);
561 		kfree(nv_connector->edid);
562 		nv_connector->edid = NULL;
563 	}
564 
565 	/* Outputs are only polled while runtime active, so resuming the
566 	 * device here is unnecessary (and would deadlock upon runtime suspend
567 	 * because it waits for polling to finish). We do however, want to
568 	 * prevent the autosuspend timer from elapsing during this operation
569 	 * if possible.
570 	 */
571 	if (drm_kms_helper_is_poll_worker()) {
572 		pm_runtime_get_noresume(dev->dev);
573 	} else {
574 		ret = pm_runtime_get_sync(dev->dev);
575 		if (ret < 0 && ret != -EACCES)
576 			return conn_status;
577 	}
578 
579 	nv_encoder = nouveau_connector_ddc_detect(connector);
580 	if (nv_encoder && (i2c = nv_encoder->i2c) != NULL) {
581 		if ((vga_switcheroo_handler_flags() &
582 		     VGA_SWITCHEROO_CAN_SWITCH_DDC) &&
583 		    nv_connector->type == DCB_CONNECTOR_LVDS)
584 			nv_connector->edid = drm_get_edid_switcheroo(connector,
585 								     i2c);
586 		else
587 			nv_connector->edid = drm_get_edid(connector, i2c);
588 
589 		drm_connector_update_edid_property(connector,
590 							nv_connector->edid);
591 		if (!nv_connector->edid) {
592 			NV_ERROR(drm, "DDC responded, but no EDID for %s\n",
593 				 connector->name);
594 			goto detect_analog;
595 		}
596 
597 		/* Override encoder type for DVI-I based on whether EDID
598 		 * says the display is digital or analog, both use the
599 		 * same i2c channel so the value returned from ddc_detect
600 		 * isn't necessarily correct.
601 		 */
602 		nv_partner = NULL;
603 		if (nv_encoder->dcb->type == DCB_OUTPUT_TMDS)
604 			nv_partner = find_encoder(connector, DCB_OUTPUT_ANALOG);
605 		if (nv_encoder->dcb->type == DCB_OUTPUT_ANALOG)
606 			nv_partner = find_encoder(connector, DCB_OUTPUT_TMDS);
607 
608 		if (nv_partner && ((nv_encoder->dcb->type == DCB_OUTPUT_ANALOG &&
609 				    nv_partner->dcb->type == DCB_OUTPUT_TMDS) ||
610 				   (nv_encoder->dcb->type == DCB_OUTPUT_TMDS &&
611 				    nv_partner->dcb->type == DCB_OUTPUT_ANALOG))) {
612 			if (nv_connector->edid->input & DRM_EDID_INPUT_DIGITAL)
613 				type = DCB_OUTPUT_TMDS;
614 			else
615 				type = DCB_OUTPUT_ANALOG;
616 
617 			nv_encoder = find_encoder(connector, type);
618 		}
619 
620 		nouveau_connector_set_encoder(connector, nv_encoder);
621 		conn_status = connector_status_connected;
622 		drm_dp_cec_set_edid(&nv_connector->aux, nv_connector->edid);
623 		goto out;
624 	}
625 
626 	nv_encoder = nouveau_connector_of_detect(connector);
627 	if (nv_encoder) {
628 		nouveau_connector_set_encoder(connector, nv_encoder);
629 		conn_status = connector_status_connected;
630 		goto out;
631 	}
632 
633 detect_analog:
634 	nv_encoder = find_encoder(connector, DCB_OUTPUT_ANALOG);
635 	if (!nv_encoder && !nouveau_tv_disable)
636 		nv_encoder = find_encoder(connector, DCB_OUTPUT_TV);
637 	if (nv_encoder && force) {
638 		struct drm_encoder *encoder = to_drm_encoder(nv_encoder);
639 		const struct drm_encoder_helper_funcs *helper =
640 						encoder->helper_private;
641 
642 		if (helper->detect(encoder, connector) ==
643 						connector_status_connected) {
644 			nouveau_connector_set_encoder(connector, nv_encoder);
645 			conn_status = connector_status_connected;
646 			goto out;
647 		}
648 
649 	}
650 
651  out:
652 
653 	pm_runtime_mark_last_busy(dev->dev);
654 	pm_runtime_put_autosuspend(dev->dev);
655 
656 	return conn_status;
657 }
658 
659 static enum drm_connector_status
660 nouveau_connector_detect_lvds(struct drm_connector *connector, bool force)
661 {
662 	struct drm_device *dev = connector->dev;
663 	struct nouveau_drm *drm = nouveau_drm(dev);
664 	struct nouveau_connector *nv_connector = nouveau_connector(connector);
665 	struct nouveau_encoder *nv_encoder = NULL;
666 	enum drm_connector_status status = connector_status_disconnected;
667 
668 	/* Cleanup the previous EDID block. */
669 	if (nv_connector->edid) {
670 		drm_connector_update_edid_property(connector, NULL);
671 		kfree(nv_connector->edid);
672 		nv_connector->edid = NULL;
673 	}
674 
675 	nv_encoder = find_encoder(connector, DCB_OUTPUT_LVDS);
676 	if (!nv_encoder)
677 		return connector_status_disconnected;
678 
679 	/* Try retrieving EDID via DDC */
680 	if (!drm->vbios.fp_no_ddc) {
681 		status = nouveau_connector_detect(connector, force);
682 		if (status == connector_status_connected)
683 			goto out;
684 	}
685 
686 	/* On some laptops (Sony, i'm looking at you) there appears to
687 	 * be no direct way of accessing the panel's EDID.  The only
688 	 * option available to us appears to be to ask ACPI for help..
689 	 *
690 	 * It's important this check's before trying straps, one of the
691 	 * said manufacturer's laptops are configured in such a way
692 	 * the nouveau decides an entry in the VBIOS FP mode table is
693 	 * valid - it's not (rh#613284)
694 	 */
695 	if (nv_encoder->dcb->lvdsconf.use_acpi_for_edid) {
696 		if ((nv_connector->edid = nouveau_acpi_edid(dev, connector))) {
697 			status = connector_status_connected;
698 			goto out;
699 		}
700 	}
701 
702 	/* If no EDID found above, and the VBIOS indicates a hardcoded
703 	 * modeline is avalilable for the panel, set it as the panel's
704 	 * native mode and exit.
705 	 */
706 	if (nouveau_bios_fp_mode(dev, NULL) && (drm->vbios.fp_no_ddc ||
707 	    nv_encoder->dcb->lvdsconf.use_straps_for_mode)) {
708 		status = connector_status_connected;
709 		goto out;
710 	}
711 
712 	/* Still nothing, some VBIOS images have a hardcoded EDID block
713 	 * stored for the panel stored in them.
714 	 */
715 	if (!drm->vbios.fp_no_ddc) {
716 		struct edid *edid =
717 			(struct edid *)nouveau_bios_embedded_edid(dev);
718 		if (edid) {
719 			nv_connector->edid =
720 					kmemdup(edid, EDID_LENGTH, GFP_KERNEL);
721 			if (nv_connector->edid)
722 				status = connector_status_connected;
723 		}
724 	}
725 
726 out:
727 #if defined(CONFIG_ACPI_BUTTON) || \
728 	(defined(CONFIG_ACPI_BUTTON_MODULE) && defined(MODULE))
729 	if (status == connector_status_connected &&
730 	    !nouveau_ignorelid && !acpi_lid_open())
731 		status = connector_status_unknown;
732 #endif
733 
734 	drm_connector_update_edid_property(connector, nv_connector->edid);
735 	nouveau_connector_set_encoder(connector, nv_encoder);
736 	return status;
737 }
738 
739 static void
740 nouveau_connector_force(struct drm_connector *connector)
741 {
742 	struct nouveau_drm *drm = nouveau_drm(connector->dev);
743 	struct nouveau_connector *nv_connector = nouveau_connector(connector);
744 	struct nouveau_encoder *nv_encoder;
745 	int type;
746 
747 	if (nv_connector->type == DCB_CONNECTOR_DVI_I) {
748 		if (connector->force == DRM_FORCE_ON_DIGITAL)
749 			type = DCB_OUTPUT_TMDS;
750 		else
751 			type = DCB_OUTPUT_ANALOG;
752 	} else
753 		type = DCB_OUTPUT_ANY;
754 
755 	nv_encoder = find_encoder(connector, type);
756 	if (!nv_encoder) {
757 		NV_ERROR(drm, "can't find encoder to force %s on!\n",
758 			 connector->name);
759 		connector->status = connector_status_disconnected;
760 		return;
761 	}
762 
763 	nouveau_connector_set_encoder(connector, nv_encoder);
764 }
765 
766 static int
767 nouveau_connector_set_property(struct drm_connector *connector,
768 			       struct drm_property *property, uint64_t value)
769 {
770 	struct nouveau_connector *nv_connector = nouveau_connector(connector);
771 	struct nouveau_encoder *nv_encoder = nv_connector->detected_encoder;
772 	struct nouveau_conn_atom *asyc = &nv_connector->properties_state;
773 	struct drm_encoder *encoder = to_drm_encoder(nv_encoder);
774 	int ret;
775 
776 	ret = connector->funcs->atomic_set_property(&nv_connector->base,
777 						    &asyc->state,
778 						    property, value);
779 	if (ret) {
780 		if (nv_encoder && nv_encoder->dcb->type == DCB_OUTPUT_TV)
781 			return get_slave_funcs(encoder)->set_property(
782 				encoder, connector, property, value);
783 		return ret;
784 	}
785 
786 	nv_connector->scaling_mode = asyc->scaler.mode;
787 	nv_connector->dithering_mode = asyc->dither.mode;
788 
789 	if (connector->encoder && connector->encoder->crtc) {
790 		ret = drm_crtc_helper_set_mode(connector->encoder->crtc,
791 					      &connector->encoder->crtc->mode,
792 					       connector->encoder->crtc->x,
793 					       connector->encoder->crtc->y,
794 					       NULL);
795 		if (!ret)
796 			return -EINVAL;
797 	}
798 
799 	return 0;
800 }
801 
802 struct moderec {
803 	int hdisplay;
804 	int vdisplay;
805 };
806 
807 static struct moderec scaler_modes[] = {
808 	{ 1920, 1200 },
809 	{ 1920, 1080 },
810 	{ 1680, 1050 },
811 	{ 1600, 1200 },
812 	{ 1400, 1050 },
813 	{ 1280, 1024 },
814 	{ 1280, 960 },
815 	{ 1152, 864 },
816 	{ 1024, 768 },
817 	{ 800, 600 },
818 	{ 720, 400 },
819 	{ 640, 480 },
820 	{ 640, 400 },
821 	{ 640, 350 },
822 	{}
823 };
824 
825 static int
826 nouveau_connector_scaler_modes_add(struct drm_connector *connector)
827 {
828 	struct nouveau_connector *nv_connector = nouveau_connector(connector);
829 	struct drm_display_mode *native = nv_connector->native_mode, *m;
830 	struct drm_device *dev = connector->dev;
831 	struct moderec *mode = &scaler_modes[0];
832 	int modes = 0;
833 
834 	if (!native)
835 		return 0;
836 
837 	while (mode->hdisplay) {
838 		if (mode->hdisplay <= native->hdisplay &&
839 		    mode->vdisplay <= native->vdisplay &&
840 		    (mode->hdisplay != native->hdisplay ||
841 		     mode->vdisplay != native->vdisplay)) {
842 			m = drm_cvt_mode(dev, mode->hdisplay, mode->vdisplay,
843 					 drm_mode_vrefresh(native), false,
844 					 false, false);
845 			if (!m)
846 				continue;
847 
848 			drm_mode_probed_add(connector, m);
849 			modes++;
850 		}
851 
852 		mode++;
853 	}
854 
855 	return modes;
856 }
857 
858 static void
859 nouveau_connector_detect_depth(struct drm_connector *connector)
860 {
861 	struct nouveau_drm *drm = nouveau_drm(connector->dev);
862 	struct nouveau_connector *nv_connector = nouveau_connector(connector);
863 	struct nouveau_encoder *nv_encoder = nv_connector->detected_encoder;
864 	struct nvbios *bios = &drm->vbios;
865 	struct drm_display_mode *mode = nv_connector->native_mode;
866 	bool duallink;
867 
868 	/* if the edid is feeling nice enough to provide this info, use it */
869 	if (nv_connector->edid && connector->display_info.bpc)
870 		return;
871 
872 	/* EDID 1.4 is *supposed* to be supported on eDP, but, Apple... */
873 	if (nv_connector->type == DCB_CONNECTOR_eDP) {
874 		connector->display_info.bpc = 6;
875 		return;
876 	}
877 
878 	/* we're out of options unless we're LVDS, default to 8bpc */
879 	if (nv_encoder->dcb->type != DCB_OUTPUT_LVDS) {
880 		connector->display_info.bpc = 8;
881 		return;
882 	}
883 
884 	connector->display_info.bpc = 6;
885 
886 	/* LVDS: panel straps */
887 	if (bios->fp_no_ddc) {
888 		if (bios->fp.if_is_24bit)
889 			connector->display_info.bpc = 8;
890 		return;
891 	}
892 
893 	/* LVDS: DDC panel, need to first determine the number of links to
894 	 * know which if_is_24bit flag to check...
895 	 */
896 	if (nv_connector->edid &&
897 	    nv_connector->type == DCB_CONNECTOR_LVDS_SPWG)
898 		duallink = ((u8 *)nv_connector->edid)[121] == 2;
899 	else
900 		duallink = mode->clock >= bios->fp.duallink_transition_clk;
901 
902 	if ((!duallink && (bios->fp.strapless_is_24bit & 1)) ||
903 	    ( duallink && (bios->fp.strapless_is_24bit & 2)))
904 		connector->display_info.bpc = 8;
905 }
906 
907 static int
908 nouveau_connector_late_register(struct drm_connector *connector)
909 {
910 	int ret;
911 
912 	ret = nouveau_backlight_init(connector);
913 
914 	return ret;
915 }
916 
917 static void
918 nouveau_connector_early_unregister(struct drm_connector *connector)
919 {
920 	nouveau_backlight_fini(connector);
921 }
922 
923 static int
924 nouveau_connector_get_modes(struct drm_connector *connector)
925 {
926 	struct drm_device *dev = connector->dev;
927 	struct nouveau_drm *drm = nouveau_drm(dev);
928 	struct nouveau_connector *nv_connector = nouveau_connector(connector);
929 	struct nouveau_encoder *nv_encoder = nv_connector->detected_encoder;
930 	struct drm_encoder *encoder = to_drm_encoder(nv_encoder);
931 	int ret = 0;
932 
933 	/* destroy the native mode, the attached monitor could have changed.
934 	 */
935 	if (nv_connector->native_mode) {
936 		drm_mode_destroy(dev, nv_connector->native_mode);
937 		nv_connector->native_mode = NULL;
938 	}
939 
940 	if (nv_connector->edid)
941 		ret = drm_add_edid_modes(connector, nv_connector->edid);
942 	else
943 	if (nv_encoder->dcb->type == DCB_OUTPUT_LVDS &&
944 	    (nv_encoder->dcb->lvdsconf.use_straps_for_mode ||
945 	     drm->vbios.fp_no_ddc) && nouveau_bios_fp_mode(dev, NULL)) {
946 		struct drm_display_mode mode;
947 
948 		nouveau_bios_fp_mode(dev, &mode);
949 		nv_connector->native_mode = drm_mode_duplicate(dev, &mode);
950 	}
951 
952 	/* Determine display colour depth for everything except LVDS now,
953 	 * DP requires this before mode_valid() is called.
954 	 */
955 	if (connector->connector_type != DRM_MODE_CONNECTOR_LVDS)
956 		nouveau_connector_detect_depth(connector);
957 
958 	/* Find the native mode if this is a digital panel, if we didn't
959 	 * find any modes through DDC previously add the native mode to
960 	 * the list of modes.
961 	 */
962 	if (!nv_connector->native_mode)
963 		nv_connector->native_mode = nouveau_conn_native_mode(connector);
964 	if (ret == 0 && nv_connector->native_mode) {
965 		struct drm_display_mode *mode;
966 
967 		mode = drm_mode_duplicate(dev, nv_connector->native_mode);
968 		drm_mode_probed_add(connector, mode);
969 		ret = 1;
970 	}
971 
972 	/* Determine LVDS colour depth, must happen after determining
973 	 * "native" mode as some VBIOS tables require us to use the
974 	 * pixel clock as part of the lookup...
975 	 */
976 	if (connector->connector_type == DRM_MODE_CONNECTOR_LVDS)
977 		nouveau_connector_detect_depth(connector);
978 
979 	if (nv_encoder->dcb->type == DCB_OUTPUT_TV)
980 		ret = get_slave_funcs(encoder)->get_modes(encoder, connector);
981 
982 	if (nv_connector->type == DCB_CONNECTOR_LVDS ||
983 	    nv_connector->type == DCB_CONNECTOR_LVDS_SPWG ||
984 	    nv_connector->type == DCB_CONNECTOR_eDP)
985 		ret += nouveau_connector_scaler_modes_add(connector);
986 
987 	return ret;
988 }
989 
990 static unsigned
991 get_tmds_link_bandwidth(struct drm_connector *connector)
992 {
993 	struct nouveau_connector *nv_connector = nouveau_connector(connector);
994 	struct nouveau_encoder *nv_encoder = nv_connector->detected_encoder;
995 	struct nouveau_drm *drm = nouveau_drm(connector->dev);
996 	struct dcb_output *dcb = nv_connector->detected_encoder->dcb;
997 	struct drm_display_info *info = NULL;
998 	unsigned duallink_scale =
999 		nouveau_duallink && nv_encoder->dcb->duallink_possible ? 2 : 1;
1000 
1001 	if (drm_detect_hdmi_monitor(nv_connector->edid)) {
1002 		info = &nv_connector->base.display_info;
1003 		duallink_scale = 1;
1004 	}
1005 
1006 	if (info) {
1007 		if (nouveau_hdmimhz > 0)
1008 			return nouveau_hdmimhz * 1000;
1009 		/* Note: these limits are conservative, some Fermi's
1010 		 * can do 297 MHz. Unclear how this can be determined.
1011 		 */
1012 		if (drm->client.device.info.chipset >= 0x120) {
1013 			const int max_tmds_clock =
1014 				info->hdmi.scdc.scrambling.supported ?
1015 				594000 : 340000;
1016 			return info->max_tmds_clock ?
1017 				min(info->max_tmds_clock, max_tmds_clock) :
1018 				max_tmds_clock;
1019 		}
1020 		if (drm->client.device.info.family >= NV_DEVICE_INFO_V0_KEPLER)
1021 			return 297000;
1022 		if (drm->client.device.info.family >= NV_DEVICE_INFO_V0_FERMI)
1023 			return 225000;
1024 	}
1025 
1026 	if (dcb->location != DCB_LOC_ON_CHIP ||
1027 	    drm->client.device.info.chipset >= 0x46)
1028 		return 165000 * duallink_scale;
1029 	else if (drm->client.device.info.chipset >= 0x40)
1030 		return 155000 * duallink_scale;
1031 	else if (drm->client.device.info.chipset >= 0x18)
1032 		return 135000 * duallink_scale;
1033 	else
1034 		return 112000 * duallink_scale;
1035 }
1036 
1037 enum drm_mode_status
1038 nouveau_conn_mode_clock_valid(const struct drm_display_mode *mode,
1039 			      const unsigned min_clock,
1040 			      const unsigned max_clock,
1041 			      unsigned int *clock_out)
1042 {
1043 	unsigned int clock = mode->clock;
1044 
1045 	if ((mode->flags & DRM_MODE_FLAG_3D_MASK) ==
1046 	    DRM_MODE_FLAG_3D_FRAME_PACKING)
1047 		clock *= 2;
1048 
1049 	if (clock < min_clock)
1050 		return MODE_CLOCK_LOW;
1051 	if (clock > max_clock)
1052 		return MODE_CLOCK_HIGH;
1053 
1054 	if (clock_out)
1055 		*clock_out = clock;
1056 
1057 	return MODE_OK;
1058 }
1059 
1060 static enum drm_mode_status
1061 nouveau_connector_mode_valid(struct drm_connector *connector,
1062 			     struct drm_display_mode *mode)
1063 {
1064 	struct nouveau_connector *nv_connector = nouveau_connector(connector);
1065 	struct nouveau_encoder *nv_encoder = nv_connector->detected_encoder;
1066 	struct drm_encoder *encoder = to_drm_encoder(nv_encoder);
1067 	unsigned min_clock = 25000, max_clock = min_clock;
1068 
1069 	switch (nv_encoder->dcb->type) {
1070 	case DCB_OUTPUT_LVDS:
1071 		if (nv_connector->native_mode &&
1072 		    (mode->hdisplay > nv_connector->native_mode->hdisplay ||
1073 		     mode->vdisplay > nv_connector->native_mode->vdisplay))
1074 			return MODE_PANEL;
1075 
1076 		min_clock = 0;
1077 		max_clock = 400000;
1078 		break;
1079 	case DCB_OUTPUT_TMDS:
1080 		max_clock = get_tmds_link_bandwidth(connector);
1081 		break;
1082 	case DCB_OUTPUT_ANALOG:
1083 		max_clock = nv_encoder->dcb->crtconf.maxfreq;
1084 		if (!max_clock)
1085 			max_clock = 350000;
1086 		break;
1087 	case DCB_OUTPUT_TV:
1088 		return get_slave_funcs(encoder)->mode_valid(encoder, mode);
1089 	case DCB_OUTPUT_DP:
1090 		return nv50_dp_mode_valid(connector, nv_encoder, mode, NULL);
1091 	default:
1092 		BUG();
1093 		return MODE_BAD;
1094 	}
1095 
1096 	return nouveau_conn_mode_clock_valid(mode, min_clock, max_clock,
1097 					     NULL);
1098 }
1099 
1100 static struct drm_encoder *
1101 nouveau_connector_best_encoder(struct drm_connector *connector)
1102 {
1103 	struct nouveau_connector *nv_connector = nouveau_connector(connector);
1104 
1105 	if (nv_connector->detected_encoder)
1106 		return to_drm_encoder(nv_connector->detected_encoder);
1107 
1108 	return NULL;
1109 }
1110 
1111 static const struct drm_connector_helper_funcs
1112 nouveau_connector_helper_funcs = {
1113 	.get_modes = nouveau_connector_get_modes,
1114 	.mode_valid = nouveau_connector_mode_valid,
1115 	.best_encoder = nouveau_connector_best_encoder,
1116 };
1117 
1118 static const struct drm_connector_funcs
1119 nouveau_connector_funcs = {
1120 	.dpms = drm_helper_connector_dpms,
1121 	.reset = nouveau_conn_reset,
1122 	.detect = nouveau_connector_detect,
1123 	.force = nouveau_connector_force,
1124 	.fill_modes = drm_helper_probe_single_connector_modes,
1125 	.set_property = nouveau_connector_set_property,
1126 	.destroy = nouveau_connector_destroy,
1127 	.atomic_duplicate_state = nouveau_conn_atomic_duplicate_state,
1128 	.atomic_destroy_state = nouveau_conn_atomic_destroy_state,
1129 	.atomic_set_property = nouveau_conn_atomic_set_property,
1130 	.atomic_get_property = nouveau_conn_atomic_get_property,
1131 	.late_register = nouveau_connector_late_register,
1132 	.early_unregister = nouveau_connector_early_unregister,
1133 };
1134 
1135 static const struct drm_connector_funcs
1136 nouveau_connector_funcs_lvds = {
1137 	.dpms = drm_helper_connector_dpms,
1138 	.reset = nouveau_conn_reset,
1139 	.detect = nouveau_connector_detect_lvds,
1140 	.force = nouveau_connector_force,
1141 	.fill_modes = drm_helper_probe_single_connector_modes,
1142 	.set_property = nouveau_connector_set_property,
1143 	.destroy = nouveau_connector_destroy,
1144 	.atomic_duplicate_state = nouveau_conn_atomic_duplicate_state,
1145 	.atomic_destroy_state = nouveau_conn_atomic_destroy_state,
1146 	.atomic_set_property = nouveau_conn_atomic_set_property,
1147 	.atomic_get_property = nouveau_conn_atomic_get_property,
1148 	.late_register = nouveau_connector_late_register,
1149 	.early_unregister = nouveau_connector_early_unregister,
1150 };
1151 
1152 static int
1153 nouveau_connector_hotplug(struct nvif_notify *notify)
1154 {
1155 	struct nouveau_connector *nv_connector =
1156 		container_of(notify, typeof(*nv_connector), hpd);
1157 	struct drm_connector *connector = &nv_connector->base;
1158 	struct nouveau_drm *drm = nouveau_drm(connector->dev);
1159 	const struct nvif_notify_conn_rep_v0 *rep = notify->data;
1160 	const char *name = connector->name;
1161 	struct nouveau_encoder *nv_encoder;
1162 	int ret;
1163 	bool plugged = (rep->mask != NVIF_NOTIFY_CONN_V0_UNPLUG);
1164 
1165 	if (rep->mask & NVIF_NOTIFY_CONN_V0_IRQ) {
1166 		NV_DEBUG(drm, "service %s\n", name);
1167 		drm_dp_cec_irq(&nv_connector->aux);
1168 		if ((nv_encoder = find_encoder(connector, DCB_OUTPUT_DP)))
1169 			nv50_mstm_service(nv_encoder->dp.mstm);
1170 
1171 		return NVIF_NOTIFY_KEEP;
1172 	}
1173 
1174 	ret = pm_runtime_get(drm->dev->dev);
1175 	if (ret == 0) {
1176 		/* We can't block here if there's a pending PM request
1177 		 * running, as we'll deadlock nouveau_display_fini() when it
1178 		 * calls nvif_put() on our nvif_notify struct. So, simply
1179 		 * defer the hotplug event until the device finishes resuming
1180 		 */
1181 		NV_DEBUG(drm, "Deferring HPD on %s until runtime resume\n",
1182 			 name);
1183 		schedule_work(&drm->hpd_work);
1184 
1185 		pm_runtime_put_noidle(drm->dev->dev);
1186 		return NVIF_NOTIFY_KEEP;
1187 	} else if (ret != 1 && ret != -EACCES) {
1188 		NV_WARN(drm, "HPD on %s dropped due to RPM failure: %d\n",
1189 			name, ret);
1190 		return NVIF_NOTIFY_DROP;
1191 	}
1192 
1193 	if (!plugged)
1194 		drm_dp_cec_unset_edid(&nv_connector->aux);
1195 	NV_DEBUG(drm, "%splugged %s\n", plugged ? "" : "un", name);
1196 	if ((nv_encoder = find_encoder(connector, DCB_OUTPUT_DP))) {
1197 		if (!plugged)
1198 			nv50_mstm_remove(nv_encoder->dp.mstm);
1199 	}
1200 
1201 	drm_helper_hpd_irq_event(connector->dev);
1202 
1203 	pm_runtime_mark_last_busy(drm->dev->dev);
1204 	pm_runtime_put_autosuspend(drm->dev->dev);
1205 	return NVIF_NOTIFY_KEEP;
1206 }
1207 
1208 static ssize_t
1209 nouveau_connector_aux_xfer(struct drm_dp_aux *obj, struct drm_dp_aux_msg *msg)
1210 {
1211 	struct nouveau_connector *nv_connector =
1212 		container_of(obj, typeof(*nv_connector), aux);
1213 	struct nouveau_encoder *nv_encoder;
1214 	struct nvkm_i2c_aux *aux;
1215 	u8 size = msg->size;
1216 	int ret;
1217 
1218 	nv_encoder = find_encoder(&nv_connector->base, DCB_OUTPUT_DP);
1219 	if (!nv_encoder || !(aux = nv_encoder->aux))
1220 		return -ENODEV;
1221 	if (WARN_ON(msg->size > 16))
1222 		return -E2BIG;
1223 
1224 	ret = nvkm_i2c_aux_acquire(aux);
1225 	if (ret)
1226 		return ret;
1227 
1228 	ret = nvkm_i2c_aux_xfer(aux, false, msg->request, msg->address,
1229 				msg->buffer, &size);
1230 	nvkm_i2c_aux_release(aux);
1231 	if (ret >= 0) {
1232 		msg->reply = ret;
1233 		return size;
1234 	}
1235 
1236 	return ret;
1237 }
1238 
1239 static int
1240 drm_conntype_from_dcb(enum dcb_connector_type dcb)
1241 {
1242 	switch (dcb) {
1243 	case DCB_CONNECTOR_VGA      : return DRM_MODE_CONNECTOR_VGA;
1244 	case DCB_CONNECTOR_TV_0     :
1245 	case DCB_CONNECTOR_TV_1     :
1246 	case DCB_CONNECTOR_TV_3     : return DRM_MODE_CONNECTOR_TV;
1247 	case DCB_CONNECTOR_DMS59_0  :
1248 	case DCB_CONNECTOR_DMS59_1  :
1249 	case DCB_CONNECTOR_DVI_I    : return DRM_MODE_CONNECTOR_DVII;
1250 	case DCB_CONNECTOR_DVI_D    : return DRM_MODE_CONNECTOR_DVID;
1251 	case DCB_CONNECTOR_LVDS     :
1252 	case DCB_CONNECTOR_LVDS_SPWG: return DRM_MODE_CONNECTOR_LVDS;
1253 	case DCB_CONNECTOR_DMS59_DP0:
1254 	case DCB_CONNECTOR_DMS59_DP1:
1255 	case DCB_CONNECTOR_DP       :
1256 	case DCB_CONNECTOR_USB_C    : return DRM_MODE_CONNECTOR_DisplayPort;
1257 	case DCB_CONNECTOR_eDP      : return DRM_MODE_CONNECTOR_eDP;
1258 	case DCB_CONNECTOR_HDMI_0   :
1259 	case DCB_CONNECTOR_HDMI_1   :
1260 	case DCB_CONNECTOR_HDMI_C   : return DRM_MODE_CONNECTOR_HDMIA;
1261 	case DCB_CONNECTOR_WFD	    : return DRM_MODE_CONNECTOR_VIRTUAL;
1262 	default:
1263 		break;
1264 	}
1265 
1266 	return DRM_MODE_CONNECTOR_Unknown;
1267 }
1268 
1269 struct drm_connector *
1270 nouveau_connector_create(struct drm_device *dev,
1271 			 const struct dcb_output *dcbe)
1272 {
1273 	const struct drm_connector_funcs *funcs = &nouveau_connector_funcs;
1274 	struct nouveau_drm *drm = nouveau_drm(dev);
1275 	struct nouveau_display *disp = nouveau_display(dev);
1276 	struct nouveau_connector *nv_connector = NULL;
1277 	struct drm_connector *connector;
1278 	struct drm_connector_list_iter conn_iter;
1279 	char aux_name[48] = {0};
1280 	int index = dcbe->connector;
1281 	int type, ret = 0;
1282 	bool dummy;
1283 
1284 	drm_connector_list_iter_begin(dev, &conn_iter);
1285 	nouveau_for_each_non_mst_connector_iter(connector, &conn_iter) {
1286 		nv_connector = nouveau_connector(connector);
1287 		if (nv_connector->index == index) {
1288 			drm_connector_list_iter_end(&conn_iter);
1289 			return connector;
1290 		}
1291 	}
1292 	drm_connector_list_iter_end(&conn_iter);
1293 
1294 	nv_connector = kzalloc(sizeof(*nv_connector), GFP_KERNEL);
1295 	if (!nv_connector)
1296 		return ERR_PTR(-ENOMEM);
1297 
1298 	connector = &nv_connector->base;
1299 	nv_connector->index = index;
1300 
1301 	/* attempt to parse vbios connector type and hotplug gpio */
1302 	nv_connector->dcb = olddcb_conn(dev, index);
1303 	if (nv_connector->dcb) {
1304 		u32 entry = ROM16(nv_connector->dcb[0]);
1305 		if (olddcb_conntab(dev)[3] >= 4)
1306 			entry |= (u32)ROM16(nv_connector->dcb[2]) << 16;
1307 
1308 		nv_connector->type = nv_connector->dcb[0];
1309 		if (drm_conntype_from_dcb(nv_connector->type) ==
1310 					  DRM_MODE_CONNECTOR_Unknown) {
1311 			NV_WARN(drm, "unknown connector type %02x\n",
1312 				nv_connector->type);
1313 			nv_connector->type = DCB_CONNECTOR_NONE;
1314 		}
1315 
1316 		/* Gigabyte NX85T */
1317 		if (nv_match_device(dev, 0x0421, 0x1458, 0x344c)) {
1318 			if (nv_connector->type == DCB_CONNECTOR_HDMI_1)
1319 				nv_connector->type = DCB_CONNECTOR_DVI_I;
1320 		}
1321 
1322 		/* Gigabyte GV-NX86T512H */
1323 		if (nv_match_device(dev, 0x0402, 0x1458, 0x3455)) {
1324 			if (nv_connector->type == DCB_CONNECTOR_HDMI_1)
1325 				nv_connector->type = DCB_CONNECTOR_DVI_I;
1326 		}
1327 	} else {
1328 		nv_connector->type = DCB_CONNECTOR_NONE;
1329 	}
1330 
1331 	/* no vbios data, or an unknown dcb connector type - attempt to
1332 	 * figure out something suitable ourselves
1333 	 */
1334 	if (nv_connector->type == DCB_CONNECTOR_NONE) {
1335 		struct nouveau_drm *drm = nouveau_drm(dev);
1336 		struct dcb_table *dcbt = &drm->vbios.dcb;
1337 		u32 encoders = 0;
1338 		int i;
1339 
1340 		for (i = 0; i < dcbt->entries; i++) {
1341 			if (dcbt->entry[i].connector == nv_connector->index)
1342 				encoders |= (1 << dcbt->entry[i].type);
1343 		}
1344 
1345 		if (encoders & (1 << DCB_OUTPUT_DP)) {
1346 			if (encoders & (1 << DCB_OUTPUT_TMDS))
1347 				nv_connector->type = DCB_CONNECTOR_DP;
1348 			else
1349 				nv_connector->type = DCB_CONNECTOR_eDP;
1350 		} else
1351 		if (encoders & (1 << DCB_OUTPUT_TMDS)) {
1352 			if (encoders & (1 << DCB_OUTPUT_ANALOG))
1353 				nv_connector->type = DCB_CONNECTOR_DVI_I;
1354 			else
1355 				nv_connector->type = DCB_CONNECTOR_DVI_D;
1356 		} else
1357 		if (encoders & (1 << DCB_OUTPUT_ANALOG)) {
1358 			nv_connector->type = DCB_CONNECTOR_VGA;
1359 		} else
1360 		if (encoders & (1 << DCB_OUTPUT_LVDS)) {
1361 			nv_connector->type = DCB_CONNECTOR_LVDS;
1362 		} else
1363 		if (encoders & (1 << DCB_OUTPUT_TV)) {
1364 			nv_connector->type = DCB_CONNECTOR_TV_0;
1365 		}
1366 	}
1367 
1368 	switch ((type = drm_conntype_from_dcb(nv_connector->type))) {
1369 	case DRM_MODE_CONNECTOR_LVDS:
1370 		ret = nouveau_bios_parse_lvds_table(dev, 0, &dummy, &dummy);
1371 		if (ret) {
1372 			NV_ERROR(drm, "Error parsing LVDS table, disabling\n");
1373 			kfree(nv_connector);
1374 			return ERR_PTR(ret);
1375 		}
1376 
1377 		funcs = &nouveau_connector_funcs_lvds;
1378 		break;
1379 	case DRM_MODE_CONNECTOR_DisplayPort:
1380 	case DRM_MODE_CONNECTOR_eDP:
1381 		nv_connector->aux.dev = connector->kdev;
1382 		nv_connector->aux.transfer = nouveau_connector_aux_xfer;
1383 		snprintf(aux_name, sizeof(aux_name), "sor-%04x-%04x",
1384 			 dcbe->hasht, dcbe->hashm);
1385 		nv_connector->aux.name = kstrdup(aux_name, GFP_KERNEL);
1386 		ret = drm_dp_aux_register(&nv_connector->aux);
1387 		if (ret) {
1388 			NV_ERROR(drm, "failed to register aux channel\n");
1389 			kfree(nv_connector);
1390 			return ERR_PTR(ret);
1391 		}
1392 		funcs = &nouveau_connector_funcs;
1393 		break;
1394 	default:
1395 		funcs = &nouveau_connector_funcs;
1396 		break;
1397 	}
1398 
1399 	/* HDMI 3D support */
1400 	if ((disp->disp.object.oclass >= G82_DISP)
1401 	    && ((type == DRM_MODE_CONNECTOR_DisplayPort)
1402 		|| (type == DRM_MODE_CONNECTOR_eDP)
1403 		|| (type == DRM_MODE_CONNECTOR_HDMIA)))
1404 		connector->stereo_allowed = true;
1405 
1406 	/* defaults, will get overridden in detect() */
1407 	connector->interlace_allowed = false;
1408 	connector->doublescan_allowed = false;
1409 
1410 	drm_connector_init(dev, connector, funcs, type);
1411 	drm_connector_helper_add(connector, &nouveau_connector_helper_funcs);
1412 
1413 	connector->funcs->reset(connector);
1414 	nouveau_conn_attach_properties(connector);
1415 
1416 	/* Default scaling mode */
1417 	switch (nv_connector->type) {
1418 	case DCB_CONNECTOR_LVDS:
1419 	case DCB_CONNECTOR_LVDS_SPWG:
1420 	case DCB_CONNECTOR_eDP:
1421 		/* see note in nouveau_connector_set_property() */
1422 		if (disp->disp.object.oclass < NV50_DISP) {
1423 			nv_connector->scaling_mode = DRM_MODE_SCALE_FULLSCREEN;
1424 			break;
1425 		}
1426 		nv_connector->scaling_mode = DRM_MODE_SCALE_NONE;
1427 		break;
1428 	default:
1429 		nv_connector->scaling_mode = DRM_MODE_SCALE_NONE;
1430 		break;
1431 	}
1432 
1433 	/* dithering properties */
1434 	switch (nv_connector->type) {
1435 	case DCB_CONNECTOR_TV_0:
1436 	case DCB_CONNECTOR_TV_1:
1437 	case DCB_CONNECTOR_TV_3:
1438 	case DCB_CONNECTOR_VGA:
1439 		break;
1440 	default:
1441 		nv_connector->dithering_mode = DITHERING_MODE_AUTO;
1442 		break;
1443 	}
1444 
1445 	switch (type) {
1446 	case DRM_MODE_CONNECTOR_DisplayPort:
1447 	case DRM_MODE_CONNECTOR_eDP:
1448 		drm_dp_cec_register_connector(&nv_connector->aux, connector);
1449 		break;
1450 	}
1451 
1452 	ret = nvif_notify_init(&disp->disp.object, nouveau_connector_hotplug,
1453 			       true, NV04_DISP_NTFY_CONN,
1454 			       &(struct nvif_notify_conn_req_v0) {
1455 				.mask = NVIF_NOTIFY_CONN_V0_ANY,
1456 				.conn = index,
1457 			       },
1458 			       sizeof(struct nvif_notify_conn_req_v0),
1459 			       sizeof(struct nvif_notify_conn_rep_v0),
1460 			       &nv_connector->hpd);
1461 	if (ret)
1462 		connector->polled = DRM_CONNECTOR_POLL_CONNECT;
1463 	else
1464 		connector->polled = DRM_CONNECTOR_POLL_HPD;
1465 
1466 	drm_connector_register(connector);
1467 	return connector;
1468 }
1469