xref: /linux/drivers/gpio/gpiolib-of.c (revision ac84bac4062e7fc24f5e2c61c6a414b2a00a29ad)
1 // SPDX-License-Identifier: GPL-2.0+
2 /*
3  * OF helpers for the GPIO API
4  *
5  * Copyright (c) 2007-2008  MontaVista Software, Inc.
6  *
7  * Author: Anton Vorontsov <avorontsov@ru.mvista.com>
8  */
9 
10 #include <linux/device.h>
11 #include <linux/err.h>
12 #include <linux/errno.h>
13 #include <linux/module.h>
14 #include <linux/io.h>
15 #include <linux/gpio/consumer.h>
16 #include <linux/of.h>
17 #include <linux/of_address.h>
18 #include <linux/of_gpio.h>
19 #include <linux/pinctrl/pinctrl.h>
20 #include <linux/slab.h>
21 #include <linux/gpio/machine.h>
22 
23 #include "gpiolib.h"
24 #include "gpiolib-of.h"
25 
26 /**
27  * of_gpio_spi_cs_get_count() - special GPIO counting for SPI
28  * Some elder GPIO controllers need special quirks. Currently we handle
29  * the Freescale GPIO controller with bindings that doesn't use the
30  * established "cs-gpios" for chip selects but instead rely on
31  * "gpios" for the chip select lines. If we detect this, we redirect
32  * the counting of "cs-gpios" to count "gpios" transparent to the
33  * driver.
34  */
35 static int of_gpio_spi_cs_get_count(struct device *dev, const char *con_id)
36 {
37 	struct device_node *np = dev->of_node;
38 
39 	if (!IS_ENABLED(CONFIG_SPI_MASTER))
40 		return 0;
41 	if (!con_id || strcmp(con_id, "cs"))
42 		return 0;
43 	if (!of_device_is_compatible(np, "fsl,spi") &&
44 	    !of_device_is_compatible(np, "aeroflexgaisler,spictrl"))
45 		return 0;
46 	return of_gpio_named_count(np, "gpios");
47 }
48 
49 /*
50  * This is used by external users of of_gpio_count() from <linux/of_gpio.h>
51  *
52  * FIXME: get rid of those external users by converting them to GPIO
53  * descriptors and let them all use gpiod_count()
54  */
55 int of_gpio_get_count(struct device *dev, const char *con_id)
56 {
57 	int ret;
58 	char propname[32];
59 	unsigned int i;
60 
61 	ret = of_gpio_spi_cs_get_count(dev, con_id);
62 	if (ret > 0)
63 		return ret;
64 
65 	for (i = 0; i < ARRAY_SIZE(gpio_suffixes); i++) {
66 		if (con_id)
67 			snprintf(propname, sizeof(propname), "%s-%s",
68 				 con_id, gpio_suffixes[i]);
69 		else
70 			snprintf(propname, sizeof(propname), "%s",
71 				 gpio_suffixes[i]);
72 
73 		ret = of_gpio_named_count(dev->of_node, propname);
74 		if (ret > 0)
75 			break;
76 	}
77 	return ret ? ret : -ENOENT;
78 }
79 
80 static int of_gpiochip_match_node_and_xlate(struct gpio_chip *chip, void *data)
81 {
82 	struct of_phandle_args *gpiospec = data;
83 
84 	return chip->gpiodev->dev.of_node == gpiospec->np &&
85 				chip->of_xlate &&
86 				chip->of_xlate(chip, gpiospec, NULL) >= 0;
87 }
88 
89 static struct gpio_chip *of_find_gpiochip_by_xlate(
90 					struct of_phandle_args *gpiospec)
91 {
92 	return gpiochip_find(gpiospec, of_gpiochip_match_node_and_xlate);
93 }
94 
95 static struct gpio_desc *of_xlate_and_get_gpiod_flags(struct gpio_chip *chip,
96 					struct of_phandle_args *gpiospec,
97 					enum of_gpio_flags *flags)
98 {
99 	int ret;
100 
101 	if (chip->of_gpio_n_cells != gpiospec->args_count)
102 		return ERR_PTR(-EINVAL);
103 
104 	ret = chip->of_xlate(chip, gpiospec, flags);
105 	if (ret < 0)
106 		return ERR_PTR(ret);
107 
108 	return gpiochip_get_desc(chip, ret);
109 }
110 
111 /**
112  * of_gpio_need_valid_mask() - figure out if the OF GPIO driver needs
113  * to set the .valid_mask
114  * @gc: the target gpio_chip
115  *
116  * Return: true if the valid mask needs to be set
117  */
118 bool of_gpio_need_valid_mask(const struct gpio_chip *gc)
119 {
120 	int size;
121 	struct device_node *np = gc->of_node;
122 
123 	size = of_property_count_u32_elems(np,  "gpio-reserved-ranges");
124 	if (size > 0 && size % 2 == 0)
125 		return true;
126 	return false;
127 }
128 
129 static void of_gpio_flags_quirks(struct device_node *np,
130 				 const char *propname,
131 				 enum of_gpio_flags *flags,
132 				 int index)
133 {
134 	/*
135 	 * Some GPIO fixed regulator quirks.
136 	 * Note that active low is the default.
137 	 */
138 	if (IS_ENABLED(CONFIG_REGULATOR) &&
139 	    (of_device_is_compatible(np, "regulator-fixed") ||
140 	     of_device_is_compatible(np, "reg-fixed-voltage") ||
141 	     (!(strcmp(propname, "enable-gpio") &&
142 		strcmp(propname, "enable-gpios")) &&
143 	      of_device_is_compatible(np, "regulator-gpio")))) {
144 		bool active_low = !of_property_read_bool(np,
145 							 "enable-active-high");
146 		/*
147 		 * The regulator GPIO handles are specified such that the
148 		 * presence or absence of "enable-active-high" solely controls
149 		 * the polarity of the GPIO line. Any phandle flags must
150 		 * be actively ignored.
151 		 */
152 		if ((*flags & OF_GPIO_ACTIVE_LOW) && !active_low) {
153 			pr_warn("%s GPIO handle specifies active low - ignored\n",
154 				of_node_full_name(np));
155 			*flags &= ~OF_GPIO_ACTIVE_LOW;
156 		}
157 		if (active_low)
158 			*flags |= OF_GPIO_ACTIVE_LOW;
159 	}
160 	/*
161 	 * Legacy open drain handling for fixed voltage regulators.
162 	 */
163 	if (IS_ENABLED(CONFIG_REGULATOR) &&
164 	    of_device_is_compatible(np, "reg-fixed-voltage") &&
165 	    of_property_read_bool(np, "gpio-open-drain")) {
166 		*flags |= (OF_GPIO_SINGLE_ENDED | OF_GPIO_OPEN_DRAIN);
167 		pr_info("%s uses legacy open drain flag - update the DTS if you can\n",
168 			of_node_full_name(np));
169 	}
170 
171 	/*
172 	 * Legacy handling of SPI active high chip select. If we have a
173 	 * property named "cs-gpios" we need to inspect the child node
174 	 * to determine if the flags should have inverted semantics.
175 	 */
176 	if (IS_ENABLED(CONFIG_SPI_MASTER) && !strcmp(propname, "cs-gpios") &&
177 	    of_property_read_bool(np, "cs-gpios")) {
178 		struct device_node *child;
179 		u32 cs;
180 		int ret;
181 
182 		for_each_child_of_node(np, child) {
183 			ret = of_property_read_u32(child, "reg", &cs);
184 			if (ret)
185 				continue;
186 			if (cs == index) {
187 				/*
188 				 * SPI children have active low chip selects
189 				 * by default. This can be specified negatively
190 				 * by just omitting "spi-cs-high" in the
191 				 * device node, or actively by tagging on
192 				 * GPIO_ACTIVE_LOW as flag in the device
193 				 * tree. If the line is simultaneously
194 				 * tagged as active low in the device tree
195 				 * and has the "spi-cs-high" set, we get a
196 				 * conflict and the "spi-cs-high" flag will
197 				 * take precedence.
198 				 */
199 				if (of_property_read_bool(child, "spi-cs-high")) {
200 					if (*flags & OF_GPIO_ACTIVE_LOW) {
201 						pr_warn("%s GPIO handle specifies active low - ignored\n",
202 							of_node_full_name(child));
203 						*flags &= ~OF_GPIO_ACTIVE_LOW;
204 					}
205 				} else {
206 					if (!(*flags & OF_GPIO_ACTIVE_LOW))
207 						pr_info("%s enforce active low on chipselect handle\n",
208 							of_node_full_name(child));
209 					*flags |= OF_GPIO_ACTIVE_LOW;
210 				}
211 				of_node_put(child);
212 				break;
213 			}
214 		}
215 	}
216 
217 	/* Legacy handling of stmmac's active-low PHY reset line */
218 	if (IS_ENABLED(CONFIG_STMMAC_ETH) &&
219 	    !strcmp(propname, "snps,reset-gpio") &&
220 	    of_property_read_bool(np, "snps,reset-active-low"))
221 		*flags |= OF_GPIO_ACTIVE_LOW;
222 }
223 
224 /**
225  * of_get_named_gpiod_flags() - Get a GPIO descriptor and flags for GPIO API
226  * @np:		device node to get GPIO from
227  * @propname:	property name containing gpio specifier(s)
228  * @index:	index of the GPIO
229  * @flags:	a flags pointer to fill in
230  *
231  * Returns GPIO descriptor to use with Linux GPIO API, or one of the errno
232  * value on the error condition. If @flags is not NULL the function also fills
233  * in flags for the GPIO.
234  */
235 static struct gpio_desc *of_get_named_gpiod_flags(struct device_node *np,
236 		     const char *propname, int index, enum of_gpio_flags *flags)
237 {
238 	struct of_phandle_args gpiospec;
239 	struct gpio_chip *chip;
240 	struct gpio_desc *desc;
241 	int ret;
242 
243 	ret = of_parse_phandle_with_args_map(np, propname, "gpio", index,
244 					     &gpiospec);
245 	if (ret) {
246 		pr_debug("%s: can't parse '%s' property of node '%pOF[%d]'\n",
247 			__func__, propname, np, index);
248 		return ERR_PTR(ret);
249 	}
250 
251 	chip = of_find_gpiochip_by_xlate(&gpiospec);
252 	if (!chip) {
253 		desc = ERR_PTR(-EPROBE_DEFER);
254 		goto out;
255 	}
256 
257 	desc = of_xlate_and_get_gpiod_flags(chip, &gpiospec, flags);
258 	if (IS_ERR(desc))
259 		goto out;
260 
261 	if (flags)
262 		of_gpio_flags_quirks(np, propname, flags, index);
263 
264 	pr_debug("%s: parsed '%s' property of node '%pOF[%d]' - status (%d)\n",
265 		 __func__, propname, np, index,
266 		 PTR_ERR_OR_ZERO(desc));
267 
268 out:
269 	of_node_put(gpiospec.np);
270 
271 	return desc;
272 }
273 
274 int of_get_named_gpio_flags(struct device_node *np, const char *list_name,
275 			    int index, enum of_gpio_flags *flags)
276 {
277 	struct gpio_desc *desc;
278 
279 	desc = of_get_named_gpiod_flags(np, list_name, index, flags);
280 
281 	if (IS_ERR(desc))
282 		return PTR_ERR(desc);
283 	else
284 		return desc_to_gpio(desc);
285 }
286 EXPORT_SYMBOL_GPL(of_get_named_gpio_flags);
287 
288 /**
289  * gpiod_get_from_of_node() - obtain a GPIO from an OF node
290  * @node:	handle of the OF node
291  * @propname:	name of the DT property representing the GPIO
292  * @index:	index of the GPIO to obtain for the consumer
293  * @dflags:	GPIO initialization flags
294  * @label:	label to attach to the requested GPIO
295  *
296  * Returns:
297  * On successful request the GPIO pin is configured in accordance with
298  * provided @dflags.
299  *
300  * In case of error an ERR_PTR() is returned.
301  */
302 struct gpio_desc *gpiod_get_from_of_node(struct device_node *node,
303 					 const char *propname, int index,
304 					 enum gpiod_flags dflags,
305 					 const char *label)
306 {
307 	unsigned long lflags = GPIO_LOOKUP_FLAGS_DEFAULT;
308 	struct gpio_desc *desc;
309 	enum of_gpio_flags flags;
310 	bool active_low = false;
311 	bool single_ended = false;
312 	bool open_drain = false;
313 	bool transitory = false;
314 	int ret;
315 
316 	desc = of_get_named_gpiod_flags(node, propname,
317 					index, &flags);
318 
319 	if (!desc || IS_ERR(desc)) {
320 		return desc;
321 	}
322 
323 	active_low = flags & OF_GPIO_ACTIVE_LOW;
324 	single_ended = flags & OF_GPIO_SINGLE_ENDED;
325 	open_drain = flags & OF_GPIO_OPEN_DRAIN;
326 	transitory = flags & OF_GPIO_TRANSITORY;
327 
328 	ret = gpiod_request(desc, label);
329 	if (ret == -EBUSY && (dflags & GPIOD_FLAGS_BIT_NONEXCLUSIVE))
330 		return desc;
331 	if (ret)
332 		return ERR_PTR(ret);
333 
334 	if (active_low)
335 		lflags |= GPIO_ACTIVE_LOW;
336 
337 	if (single_ended) {
338 		if (open_drain)
339 			lflags |= GPIO_OPEN_DRAIN;
340 		else
341 			lflags |= GPIO_OPEN_SOURCE;
342 	}
343 
344 	if (transitory)
345 		lflags |= GPIO_TRANSITORY;
346 
347 	ret = gpiod_configure_flags(desc, propname, lflags, dflags);
348 	if (ret < 0) {
349 		gpiod_put(desc);
350 		return ERR_PTR(ret);
351 	}
352 
353 	return desc;
354 }
355 EXPORT_SYMBOL_GPL(gpiod_get_from_of_node);
356 
357 /*
358  * The SPI GPIO bindings happened before we managed to establish that GPIO
359  * properties should be named "foo-gpios" so we have this special kludge for
360  * them.
361  */
362 static struct gpio_desc *of_find_spi_gpio(struct device *dev, const char *con_id,
363 					  enum of_gpio_flags *of_flags)
364 {
365 	char prop_name[32]; /* 32 is max size of property name */
366 	struct device_node *np = dev->of_node;
367 	struct gpio_desc *desc;
368 
369 	/*
370 	 * Hopefully the compiler stubs the rest of the function if this
371 	 * is false.
372 	 */
373 	if (!IS_ENABLED(CONFIG_SPI_MASTER))
374 		return ERR_PTR(-ENOENT);
375 
376 	/* Allow this specifically for "spi-gpio" devices */
377 	if (!of_device_is_compatible(np, "spi-gpio") || !con_id)
378 		return ERR_PTR(-ENOENT);
379 
380 	/* Will be "gpio-sck", "gpio-mosi" or "gpio-miso" */
381 	snprintf(prop_name, sizeof(prop_name), "%s-%s", "gpio", con_id);
382 
383 	desc = of_get_named_gpiod_flags(np, prop_name, 0, of_flags);
384 	return desc;
385 }
386 
387 /*
388  * The old Freescale bindings use simply "gpios" as name for the chip select
389  * lines rather than "cs-gpios" like all other SPI hardware. Account for this
390  * with a special quirk.
391  */
392 static struct gpio_desc *of_find_spi_cs_gpio(struct device *dev,
393 					     const char *con_id,
394 					     unsigned int idx,
395 					     unsigned long *flags)
396 {
397 	struct device_node *np = dev->of_node;
398 
399 	if (!IS_ENABLED(CONFIG_SPI_MASTER))
400 		return ERR_PTR(-ENOENT);
401 
402 	/* Allow this specifically for Freescale devices */
403 	if (!of_device_is_compatible(np, "fsl,spi") &&
404 	    !of_device_is_compatible(np, "aeroflexgaisler,spictrl"))
405 		return ERR_PTR(-ENOENT);
406 	/* Allow only if asking for "cs-gpios" */
407 	if (!con_id || strcmp(con_id, "cs"))
408 		return ERR_PTR(-ENOENT);
409 
410 	/*
411 	 * While all other SPI controllers use "cs-gpios" the Freescale
412 	 * uses just "gpios" so translate to that when "cs-gpios" is
413 	 * requested.
414 	 */
415 	return of_find_gpio(dev, NULL, idx, flags);
416 }
417 
418 /*
419  * Some regulator bindings happened before we managed to establish that GPIO
420  * properties should be named "foo-gpios" so we have this special kludge for
421  * them.
422  */
423 static struct gpio_desc *of_find_regulator_gpio(struct device *dev, const char *con_id,
424 						enum of_gpio_flags *of_flags)
425 {
426 	/* These are the connection IDs we accept as legacy GPIO phandles */
427 	const char *whitelist[] = {
428 		"wlf,ldoena", /* Arizona */
429 		"wlf,ldo1ena", /* WM8994 */
430 		"wlf,ldo2ena", /* WM8994 */
431 	};
432 	struct device_node *np = dev->of_node;
433 	struct gpio_desc *desc;
434 	int i;
435 
436 	if (!IS_ENABLED(CONFIG_REGULATOR))
437 		return ERR_PTR(-ENOENT);
438 
439 	if (!con_id)
440 		return ERR_PTR(-ENOENT);
441 
442 	i = match_string(whitelist, ARRAY_SIZE(whitelist), con_id);
443 	if (i < 0)
444 		return ERR_PTR(-ENOENT);
445 
446 	desc = of_get_named_gpiod_flags(np, con_id, 0, of_flags);
447 	return desc;
448 }
449 
450 static struct gpio_desc *of_find_arizona_gpio(struct device *dev,
451 					      const char *con_id,
452 					      enum of_gpio_flags *of_flags)
453 {
454 	if (!IS_ENABLED(CONFIG_MFD_ARIZONA))
455 		return ERR_PTR(-ENOENT);
456 
457 	if (!con_id || strcmp(con_id, "wlf,reset"))
458 		return ERR_PTR(-ENOENT);
459 
460 	return of_get_named_gpiod_flags(dev->of_node, con_id, 0, of_flags);
461 }
462 
463 struct gpio_desc *of_find_gpio(struct device *dev, const char *con_id,
464 			       unsigned int idx, unsigned long *flags)
465 {
466 	char prop_name[32]; /* 32 is max size of property name */
467 	enum of_gpio_flags of_flags;
468 	struct gpio_desc *desc;
469 	unsigned int i;
470 
471 	/* Try GPIO property "foo-gpios" and "foo-gpio" */
472 	for (i = 0; i < ARRAY_SIZE(gpio_suffixes); i++) {
473 		if (con_id)
474 			snprintf(prop_name, sizeof(prop_name), "%s-%s", con_id,
475 				 gpio_suffixes[i]);
476 		else
477 			snprintf(prop_name, sizeof(prop_name), "%s",
478 				 gpio_suffixes[i]);
479 
480 		desc = of_get_named_gpiod_flags(dev->of_node, prop_name, idx,
481 						&of_flags);
482 
483 		if (!IS_ERR(desc) || PTR_ERR(desc) != -ENOENT)
484 			break;
485 	}
486 
487 	if (PTR_ERR(desc) == -ENOENT) {
488 		/* Special handling for SPI GPIOs if used */
489 		desc = of_find_spi_gpio(dev, con_id, &of_flags);
490 	}
491 
492 	if (PTR_ERR(desc) == -ENOENT) {
493 		/* This quirk looks up flags and all */
494 		desc = of_find_spi_cs_gpio(dev, con_id, idx, flags);
495 		if (!IS_ERR(desc))
496 			return desc;
497 	}
498 
499 	if (PTR_ERR(desc) == -ENOENT) {
500 		/* Special handling for regulator GPIOs if used */
501 		desc = of_find_regulator_gpio(dev, con_id, &of_flags);
502 	}
503 
504 	if (PTR_ERR(desc) == -ENOENT)
505 		desc = of_find_arizona_gpio(dev, con_id, &of_flags);
506 
507 	if (IS_ERR(desc))
508 		return desc;
509 
510 	if (of_flags & OF_GPIO_ACTIVE_LOW)
511 		*flags |= GPIO_ACTIVE_LOW;
512 
513 	if (of_flags & OF_GPIO_SINGLE_ENDED) {
514 		if (of_flags & OF_GPIO_OPEN_DRAIN)
515 			*flags |= GPIO_OPEN_DRAIN;
516 		else
517 			*flags |= GPIO_OPEN_SOURCE;
518 	}
519 
520 	if (of_flags & OF_GPIO_TRANSITORY)
521 		*flags |= GPIO_TRANSITORY;
522 
523 	if (of_flags & OF_GPIO_PULL_UP)
524 		*flags |= GPIO_PULL_UP;
525 	if (of_flags & OF_GPIO_PULL_DOWN)
526 		*flags |= GPIO_PULL_DOWN;
527 
528 	return desc;
529 }
530 
531 /**
532  * of_parse_own_gpio() - Get a GPIO hog descriptor, names and flags for GPIO API
533  * @np:		device node to get GPIO from
534  * @chip:	GPIO chip whose hog is parsed
535  * @idx:	Index of the GPIO to parse
536  * @name:	GPIO line name
537  * @lflags:	bitmask of gpio_lookup_flags GPIO_* values - returned from
538  *		of_find_gpio() or of_parse_own_gpio()
539  * @dflags:	gpiod_flags - optional GPIO initialization flags
540  *
541  * Returns GPIO descriptor to use with Linux GPIO API, or one of the errno
542  * value on the error condition.
543  */
544 static struct gpio_desc *of_parse_own_gpio(struct device_node *np,
545 					   struct gpio_chip *chip,
546 					   unsigned int idx, const char **name,
547 					   unsigned long *lflags,
548 					   enum gpiod_flags *dflags)
549 {
550 	struct device_node *chip_np;
551 	enum of_gpio_flags xlate_flags;
552 	struct of_phandle_args gpiospec;
553 	struct gpio_desc *desc;
554 	unsigned int i;
555 	u32 tmp;
556 	int ret;
557 
558 	chip_np = chip->of_node;
559 	if (!chip_np)
560 		return ERR_PTR(-EINVAL);
561 
562 	xlate_flags = 0;
563 	*lflags = GPIO_LOOKUP_FLAGS_DEFAULT;
564 	*dflags = 0;
565 
566 	ret = of_property_read_u32(chip_np, "#gpio-cells", &tmp);
567 	if (ret)
568 		return ERR_PTR(ret);
569 
570 	gpiospec.np = chip_np;
571 	gpiospec.args_count = tmp;
572 
573 	for (i = 0; i < tmp; i++) {
574 		ret = of_property_read_u32_index(np, "gpios", idx * tmp + i,
575 						 &gpiospec.args[i]);
576 		if (ret)
577 			return ERR_PTR(ret);
578 	}
579 
580 	desc = of_xlate_and_get_gpiod_flags(chip, &gpiospec, &xlate_flags);
581 	if (IS_ERR(desc))
582 		return desc;
583 
584 	if (xlate_flags & OF_GPIO_ACTIVE_LOW)
585 		*lflags |= GPIO_ACTIVE_LOW;
586 	if (xlate_flags & OF_GPIO_TRANSITORY)
587 		*lflags |= GPIO_TRANSITORY;
588 
589 	if (of_property_read_bool(np, "input"))
590 		*dflags |= GPIOD_IN;
591 	else if (of_property_read_bool(np, "output-low"))
592 		*dflags |= GPIOD_OUT_LOW;
593 	else if (of_property_read_bool(np, "output-high"))
594 		*dflags |= GPIOD_OUT_HIGH;
595 	else {
596 		pr_warn("GPIO line %d (%pOFn): no hogging state specified, bailing out\n",
597 			desc_to_gpio(desc), np);
598 		return ERR_PTR(-EINVAL);
599 	}
600 
601 	if (name && of_property_read_string(np, "line-name", name))
602 		*name = np->name;
603 
604 	return desc;
605 }
606 
607 /**
608  * of_gpiochip_add_hog - Add all hogs in a hog device node
609  * @chip:	gpio chip to act on
610  * @hog:	device node describing the hogs
611  *
612  * Returns error if it fails otherwise 0 on success.
613  */
614 static int of_gpiochip_add_hog(struct gpio_chip *chip, struct device_node *hog)
615 {
616 	enum gpiod_flags dflags;
617 	struct gpio_desc *desc;
618 	unsigned long lflags;
619 	const char *name;
620 	unsigned int i;
621 	int ret;
622 
623 	for (i = 0;; i++) {
624 		desc = of_parse_own_gpio(hog, chip, i, &name, &lflags, &dflags);
625 		if (IS_ERR(desc))
626 			break;
627 
628 		ret = gpiod_hog(desc, name, lflags, dflags);
629 		if (ret < 0)
630 			return ret;
631 
632 #ifdef CONFIG_OF_DYNAMIC
633 		desc->hog = hog;
634 #endif
635 	}
636 
637 	return 0;
638 }
639 
640 /**
641  * of_gpiochip_scan_gpios - Scan gpio-controller for gpio definitions
642  * @chip:	gpio chip to act on
643  *
644  * This is only used by of_gpiochip_add to request/set GPIO initial
645  * configuration.
646  * It returns error if it fails otherwise 0 on success.
647  */
648 static int of_gpiochip_scan_gpios(struct gpio_chip *chip)
649 {
650 	struct device_node *np;
651 	int ret;
652 
653 	for_each_available_child_of_node(chip->of_node, np) {
654 		if (!of_property_read_bool(np, "gpio-hog"))
655 			continue;
656 
657 		ret = of_gpiochip_add_hog(chip, np);
658 		if (ret < 0) {
659 			of_node_put(np);
660 			return ret;
661 		}
662 
663 		of_node_set_flag(np, OF_POPULATED);
664 	}
665 
666 	return 0;
667 }
668 
669 #ifdef CONFIG_OF_DYNAMIC
670 /**
671  * of_gpiochip_remove_hog - Remove all hogs in a hog device node
672  * @chip:	gpio chip to act on
673  * @hog:	device node describing the hogs
674  */
675 static void of_gpiochip_remove_hog(struct gpio_chip *chip,
676 				   struct device_node *hog)
677 {
678 	struct gpio_desc *descs = chip->gpiodev->descs;
679 	unsigned int i;
680 
681 	for (i = 0; i < chip->ngpio; i++) {
682 		if (test_bit(FLAG_IS_HOGGED, &descs[i].flags) &&
683 		    descs[i].hog == hog)
684 			gpiochip_free_own_desc(&descs[i]);
685 	}
686 }
687 
688 static int of_gpiochip_match_node(struct gpio_chip *chip, void *data)
689 {
690 	return chip->gpiodev->dev.of_node == data;
691 }
692 
693 static struct gpio_chip *of_find_gpiochip_by_node(struct device_node *np)
694 {
695 	return gpiochip_find(np, of_gpiochip_match_node);
696 }
697 
698 static int of_gpio_notify(struct notifier_block *nb, unsigned long action,
699 			  void *arg)
700 {
701 	struct of_reconfig_data *rd = arg;
702 	struct gpio_chip *chip;
703 	int ret;
704 
705 	/*
706 	 * This only supports adding and removing complete gpio-hog nodes.
707 	 * Modifying an existing gpio-hog node is not supported (except for
708 	 * changing its "status" property, which is treated the same as
709 	 * addition/removal).
710 	 */
711 	switch (of_reconfig_get_state_change(action, arg)) {
712 	case OF_RECONFIG_CHANGE_ADD:
713 		if (!of_property_read_bool(rd->dn, "gpio-hog"))
714 			return NOTIFY_OK;	/* not for us */
715 
716 		if (of_node_test_and_set_flag(rd->dn, OF_POPULATED))
717 			return NOTIFY_OK;
718 
719 		chip = of_find_gpiochip_by_node(rd->dn->parent);
720 		if (chip == NULL)
721 			return NOTIFY_OK;	/* not for us */
722 
723 		ret = of_gpiochip_add_hog(chip, rd->dn);
724 		if (ret < 0) {
725 			pr_err("%s: failed to add hogs for %pOF\n", __func__,
726 			       rd->dn);
727 			of_node_clear_flag(rd->dn, OF_POPULATED);
728 			return notifier_from_errno(ret);
729 		}
730 		break;
731 
732 	case OF_RECONFIG_CHANGE_REMOVE:
733 		if (!of_node_check_flag(rd->dn, OF_POPULATED))
734 			return NOTIFY_OK;	/* already depopulated */
735 
736 		chip = of_find_gpiochip_by_node(rd->dn->parent);
737 		if (chip == NULL)
738 			return NOTIFY_OK;	/* not for us */
739 
740 		of_gpiochip_remove_hog(chip, rd->dn);
741 		of_node_clear_flag(rd->dn, OF_POPULATED);
742 		break;
743 	}
744 
745 	return NOTIFY_OK;
746 }
747 
748 struct notifier_block gpio_of_notifier = {
749 	.notifier_call = of_gpio_notify,
750 };
751 #endif /* CONFIG_OF_DYNAMIC */
752 
753 /**
754  * of_gpio_simple_xlate - translate gpiospec to the GPIO number and flags
755  * @gc:		pointer to the gpio_chip structure
756  * @gpiospec:	GPIO specifier as found in the device tree
757  * @flags:	a flags pointer to fill in
758  *
759  * This is simple translation function, suitable for the most 1:1 mapped
760  * GPIO chips. This function performs only one sanity check: whether GPIO
761  * is less than ngpios (that is specified in the gpio_chip).
762  */
763 static int of_gpio_simple_xlate(struct gpio_chip *gc,
764 				const struct of_phandle_args *gpiospec,
765 				u32 *flags)
766 {
767 	/*
768 	 * We're discouraging gpio_cells < 2, since that way you'll have to
769 	 * write your own xlate function (that will have to retrieve the GPIO
770 	 * number and the flags from a single gpio cell -- this is possible,
771 	 * but not recommended).
772 	 */
773 	if (gc->of_gpio_n_cells < 2) {
774 		WARN_ON(1);
775 		return -EINVAL;
776 	}
777 
778 	if (WARN_ON(gpiospec->args_count < gc->of_gpio_n_cells))
779 		return -EINVAL;
780 
781 	if (gpiospec->args[0] >= gc->ngpio)
782 		return -EINVAL;
783 
784 	if (flags)
785 		*flags = gpiospec->args[1];
786 
787 	return gpiospec->args[0];
788 }
789 
790 /**
791  * of_mm_gpiochip_add_data - Add memory mapped GPIO chip (bank)
792  * @np:		device node of the GPIO chip
793  * @mm_gc:	pointer to the of_mm_gpio_chip allocated structure
794  * @data:	driver data to store in the struct gpio_chip
795  *
796  * To use this function you should allocate and fill mm_gc with:
797  *
798  * 1) In the gpio_chip structure:
799  *    - all the callbacks
800  *    - of_gpio_n_cells
801  *    - of_xlate callback (optional)
802  *
803  * 3) In the of_mm_gpio_chip structure:
804  *    - save_regs callback (optional)
805  *
806  * If succeeded, this function will map bank's memory and will
807  * do all necessary work for you. Then you'll able to use .regs
808  * to manage GPIOs from the callbacks.
809  */
810 int of_mm_gpiochip_add_data(struct device_node *np,
811 			    struct of_mm_gpio_chip *mm_gc,
812 			    void *data)
813 {
814 	int ret = -ENOMEM;
815 	struct gpio_chip *gc = &mm_gc->gc;
816 
817 	gc->label = kasprintf(GFP_KERNEL, "%pOF", np);
818 	if (!gc->label)
819 		goto err0;
820 
821 	mm_gc->regs = of_iomap(np, 0);
822 	if (!mm_gc->regs)
823 		goto err1;
824 
825 	gc->base = -1;
826 
827 	if (mm_gc->save_regs)
828 		mm_gc->save_regs(mm_gc);
829 
830 	mm_gc->gc.of_node = np;
831 
832 	ret = gpiochip_add_data(gc, data);
833 	if (ret)
834 		goto err2;
835 
836 	return 0;
837 err2:
838 	iounmap(mm_gc->regs);
839 err1:
840 	kfree(gc->label);
841 err0:
842 	pr_err("%pOF: GPIO chip registration failed with status %d\n", np, ret);
843 	return ret;
844 }
845 EXPORT_SYMBOL_GPL(of_mm_gpiochip_add_data);
846 
847 /**
848  * of_mm_gpiochip_remove - Remove memory mapped GPIO chip (bank)
849  * @mm_gc:	pointer to the of_mm_gpio_chip allocated structure
850  */
851 void of_mm_gpiochip_remove(struct of_mm_gpio_chip *mm_gc)
852 {
853 	struct gpio_chip *gc = &mm_gc->gc;
854 
855 	if (!mm_gc)
856 		return;
857 
858 	gpiochip_remove(gc);
859 	iounmap(mm_gc->regs);
860 	kfree(gc->label);
861 }
862 EXPORT_SYMBOL_GPL(of_mm_gpiochip_remove);
863 
864 static void of_gpiochip_init_valid_mask(struct gpio_chip *chip)
865 {
866 	int len, i;
867 	u32 start, count;
868 	struct device_node *np = chip->of_node;
869 
870 	len = of_property_count_u32_elems(np,  "gpio-reserved-ranges");
871 	if (len < 0 || len % 2 != 0)
872 		return;
873 
874 	for (i = 0; i < len; i += 2) {
875 		of_property_read_u32_index(np, "gpio-reserved-ranges",
876 					   i, &start);
877 		of_property_read_u32_index(np, "gpio-reserved-ranges",
878 					   i + 1, &count);
879 		if (start >= chip->ngpio || start + count >= chip->ngpio)
880 			continue;
881 
882 		bitmap_clear(chip->valid_mask, start, count);
883 	}
884 };
885 
886 #ifdef CONFIG_PINCTRL
887 static int of_gpiochip_add_pin_range(struct gpio_chip *chip)
888 {
889 	struct device_node *np = chip->of_node;
890 	struct of_phandle_args pinspec;
891 	struct pinctrl_dev *pctldev;
892 	int index = 0, ret;
893 	const char *name;
894 	static const char group_names_propname[] = "gpio-ranges-group-names";
895 	struct property *group_names;
896 
897 	if (!np)
898 		return 0;
899 
900 	group_names = of_find_property(np, group_names_propname, NULL);
901 
902 	for (;; index++) {
903 		ret = of_parse_phandle_with_fixed_args(np, "gpio-ranges", 3,
904 				index, &pinspec);
905 		if (ret)
906 			break;
907 
908 		pctldev = of_pinctrl_get(pinspec.np);
909 		of_node_put(pinspec.np);
910 		if (!pctldev)
911 			return -EPROBE_DEFER;
912 
913 		if (pinspec.args[2]) {
914 			if (group_names) {
915 				of_property_read_string_index(np,
916 						group_names_propname,
917 						index, &name);
918 				if (strlen(name)) {
919 					pr_err("%pOF: Group name of numeric GPIO ranges must be the empty string.\n",
920 						np);
921 					break;
922 				}
923 			}
924 			/* npins != 0: linear range */
925 			ret = gpiochip_add_pin_range(chip,
926 					pinctrl_dev_get_devname(pctldev),
927 					pinspec.args[0],
928 					pinspec.args[1],
929 					pinspec.args[2]);
930 			if (ret)
931 				return ret;
932 		} else {
933 			/* npins == 0: special range */
934 			if (pinspec.args[1]) {
935 				pr_err("%pOF: Illegal gpio-range format.\n",
936 					np);
937 				break;
938 			}
939 
940 			if (!group_names) {
941 				pr_err("%pOF: GPIO group range requested but no %s property.\n",
942 					np, group_names_propname);
943 				break;
944 			}
945 
946 			ret = of_property_read_string_index(np,
947 						group_names_propname,
948 						index, &name);
949 			if (ret)
950 				break;
951 
952 			if (!strlen(name)) {
953 				pr_err("%pOF: Group name of GPIO group range cannot be the empty string.\n",
954 				np);
955 				break;
956 			}
957 
958 			ret = gpiochip_add_pingroup_range(chip, pctldev,
959 						pinspec.args[0], name);
960 			if (ret)
961 				return ret;
962 		}
963 	}
964 
965 	return 0;
966 }
967 
968 #else
969 static int of_gpiochip_add_pin_range(struct gpio_chip *chip) { return 0; }
970 #endif
971 
972 int of_gpiochip_add(struct gpio_chip *chip)
973 {
974 	int ret;
975 
976 	if (!chip->of_node)
977 		return 0;
978 
979 	if (!chip->of_xlate) {
980 		chip->of_gpio_n_cells = 2;
981 		chip->of_xlate = of_gpio_simple_xlate;
982 	}
983 
984 	if (chip->of_gpio_n_cells > MAX_PHANDLE_ARGS)
985 		return -EINVAL;
986 
987 	of_gpiochip_init_valid_mask(chip);
988 
989 	ret = of_gpiochip_add_pin_range(chip);
990 	if (ret)
991 		return ret;
992 
993 	/* If the chip defines names itself, these take precedence */
994 	if (!chip->names)
995 		devprop_gpiochip_set_names(chip,
996 					   of_fwnode_handle(chip->of_node));
997 
998 	of_node_get(chip->of_node);
999 
1000 	ret = of_gpiochip_scan_gpios(chip);
1001 	if (ret)
1002 		of_node_put(chip->of_node);
1003 
1004 	return ret;
1005 }
1006 
1007 void of_gpiochip_remove(struct gpio_chip *chip)
1008 {
1009 	of_node_put(chip->of_node);
1010 }
1011