1 // SPDX-License-Identifier: GPL-2.0+ 2 // 3 // MXC GPIO support. (c) 2008 Daniel Mack <daniel@caiaq.de> 4 // Copyright 2008 Juergen Beisert, kernel@pengutronix.de 5 // 6 // Based on code from Freescale Semiconductor, 7 // Authors: Daniel Mack, Juergen Beisert. 8 // Copyright (C) 2004-2010 Freescale Semiconductor, Inc. All Rights Reserved. 9 10 #include <linux/clk.h> 11 #include <linux/err.h> 12 #include <linux/init.h> 13 #include <linux/interrupt.h> 14 #include <linux/io.h> 15 #include <linux/irq.h> 16 #include <linux/irqdomain.h> 17 #include <linux/irqchip/chained_irq.h> 18 #include <linux/platform_device.h> 19 #include <linux/slab.h> 20 #include <linux/syscore_ops.h> 21 #include <linux/gpio/driver.h> 22 #include <linux/of.h> 23 #include <linux/of_device.h> 24 #include <linux/bug.h> 25 26 enum mxc_gpio_hwtype { 27 IMX1_GPIO, /* runs on i.mx1 */ 28 IMX21_GPIO, /* runs on i.mx21 and i.mx27 */ 29 IMX31_GPIO, /* runs on i.mx31 */ 30 IMX35_GPIO, /* runs on all other i.mx */ 31 }; 32 33 /* device type dependent stuff */ 34 struct mxc_gpio_hwdata { 35 unsigned dr_reg; 36 unsigned gdir_reg; 37 unsigned psr_reg; 38 unsigned icr1_reg; 39 unsigned icr2_reg; 40 unsigned imr_reg; 41 unsigned isr_reg; 42 int edge_sel_reg; 43 unsigned low_level; 44 unsigned high_level; 45 unsigned rise_edge; 46 unsigned fall_edge; 47 }; 48 49 struct mxc_gpio_reg_saved { 50 u32 icr1; 51 u32 icr2; 52 u32 imr; 53 u32 gdir; 54 u32 edge_sel; 55 u32 dr; 56 }; 57 58 struct mxc_gpio_port { 59 struct list_head node; 60 void __iomem *base; 61 struct clk *clk; 62 int irq; 63 int irq_high; 64 struct irq_domain *domain; 65 struct gpio_chip gc; 66 struct device *dev; 67 u32 both_edges; 68 struct mxc_gpio_reg_saved gpio_saved_reg; 69 bool power_off; 70 }; 71 72 static struct mxc_gpio_hwdata imx1_imx21_gpio_hwdata = { 73 .dr_reg = 0x1c, 74 .gdir_reg = 0x00, 75 .psr_reg = 0x24, 76 .icr1_reg = 0x28, 77 .icr2_reg = 0x2c, 78 .imr_reg = 0x30, 79 .isr_reg = 0x34, 80 .edge_sel_reg = -EINVAL, 81 .low_level = 0x03, 82 .high_level = 0x02, 83 .rise_edge = 0x00, 84 .fall_edge = 0x01, 85 }; 86 87 static struct mxc_gpio_hwdata imx31_gpio_hwdata = { 88 .dr_reg = 0x00, 89 .gdir_reg = 0x04, 90 .psr_reg = 0x08, 91 .icr1_reg = 0x0c, 92 .icr2_reg = 0x10, 93 .imr_reg = 0x14, 94 .isr_reg = 0x18, 95 .edge_sel_reg = -EINVAL, 96 .low_level = 0x00, 97 .high_level = 0x01, 98 .rise_edge = 0x02, 99 .fall_edge = 0x03, 100 }; 101 102 static struct mxc_gpio_hwdata imx35_gpio_hwdata = { 103 .dr_reg = 0x00, 104 .gdir_reg = 0x04, 105 .psr_reg = 0x08, 106 .icr1_reg = 0x0c, 107 .icr2_reg = 0x10, 108 .imr_reg = 0x14, 109 .isr_reg = 0x18, 110 .edge_sel_reg = 0x1c, 111 .low_level = 0x00, 112 .high_level = 0x01, 113 .rise_edge = 0x02, 114 .fall_edge = 0x03, 115 }; 116 117 static enum mxc_gpio_hwtype mxc_gpio_hwtype; 118 static struct mxc_gpio_hwdata *mxc_gpio_hwdata; 119 120 #define GPIO_DR (mxc_gpio_hwdata->dr_reg) 121 #define GPIO_GDIR (mxc_gpio_hwdata->gdir_reg) 122 #define GPIO_PSR (mxc_gpio_hwdata->psr_reg) 123 #define GPIO_ICR1 (mxc_gpio_hwdata->icr1_reg) 124 #define GPIO_ICR2 (mxc_gpio_hwdata->icr2_reg) 125 #define GPIO_IMR (mxc_gpio_hwdata->imr_reg) 126 #define GPIO_ISR (mxc_gpio_hwdata->isr_reg) 127 #define GPIO_EDGE_SEL (mxc_gpio_hwdata->edge_sel_reg) 128 129 #define GPIO_INT_LOW_LEV (mxc_gpio_hwdata->low_level) 130 #define GPIO_INT_HIGH_LEV (mxc_gpio_hwdata->high_level) 131 #define GPIO_INT_RISE_EDGE (mxc_gpio_hwdata->rise_edge) 132 #define GPIO_INT_FALL_EDGE (mxc_gpio_hwdata->fall_edge) 133 #define GPIO_INT_BOTH_EDGES 0x4 134 135 static const struct platform_device_id mxc_gpio_devtype[] = { 136 { 137 .name = "imx1-gpio", 138 .driver_data = IMX1_GPIO, 139 }, { 140 .name = "imx21-gpio", 141 .driver_data = IMX21_GPIO, 142 }, { 143 .name = "imx31-gpio", 144 .driver_data = IMX31_GPIO, 145 }, { 146 .name = "imx35-gpio", 147 .driver_data = IMX35_GPIO, 148 }, { 149 /* sentinel */ 150 } 151 }; 152 153 static const struct of_device_id mxc_gpio_dt_ids[] = { 154 { .compatible = "fsl,imx1-gpio", .data = &mxc_gpio_devtype[IMX1_GPIO], }, 155 { .compatible = "fsl,imx21-gpio", .data = &mxc_gpio_devtype[IMX21_GPIO], }, 156 { .compatible = "fsl,imx31-gpio", .data = &mxc_gpio_devtype[IMX31_GPIO], }, 157 { .compatible = "fsl,imx35-gpio", .data = &mxc_gpio_devtype[IMX35_GPIO], }, 158 { .compatible = "fsl,imx7d-gpio", .data = &mxc_gpio_devtype[IMX35_GPIO], }, 159 { /* sentinel */ } 160 }; 161 162 /* 163 * MX2 has one interrupt *for all* gpio ports. The list is used 164 * to save the references to all ports, so that mx2_gpio_irq_handler 165 * can walk through all interrupt status registers. 166 */ 167 static LIST_HEAD(mxc_gpio_ports); 168 169 /* Note: This driver assumes 32 GPIOs are handled in one register */ 170 171 static int gpio_set_irq_type(struct irq_data *d, u32 type) 172 { 173 struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d); 174 struct mxc_gpio_port *port = gc->private; 175 u32 bit, val; 176 u32 gpio_idx = d->hwirq; 177 int edge; 178 void __iomem *reg = port->base; 179 180 port->both_edges &= ~(1 << gpio_idx); 181 switch (type) { 182 case IRQ_TYPE_EDGE_RISING: 183 edge = GPIO_INT_RISE_EDGE; 184 break; 185 case IRQ_TYPE_EDGE_FALLING: 186 edge = GPIO_INT_FALL_EDGE; 187 break; 188 case IRQ_TYPE_EDGE_BOTH: 189 if (GPIO_EDGE_SEL >= 0) { 190 edge = GPIO_INT_BOTH_EDGES; 191 } else { 192 val = port->gc.get(&port->gc, gpio_idx); 193 if (val) { 194 edge = GPIO_INT_LOW_LEV; 195 pr_debug("mxc: set GPIO %d to low trigger\n", gpio_idx); 196 } else { 197 edge = GPIO_INT_HIGH_LEV; 198 pr_debug("mxc: set GPIO %d to high trigger\n", gpio_idx); 199 } 200 port->both_edges |= 1 << gpio_idx; 201 } 202 break; 203 case IRQ_TYPE_LEVEL_LOW: 204 edge = GPIO_INT_LOW_LEV; 205 break; 206 case IRQ_TYPE_LEVEL_HIGH: 207 edge = GPIO_INT_HIGH_LEV; 208 break; 209 default: 210 return -EINVAL; 211 } 212 213 if (GPIO_EDGE_SEL >= 0) { 214 val = readl(port->base + GPIO_EDGE_SEL); 215 if (edge == GPIO_INT_BOTH_EDGES) 216 writel(val | (1 << gpio_idx), 217 port->base + GPIO_EDGE_SEL); 218 else 219 writel(val & ~(1 << gpio_idx), 220 port->base + GPIO_EDGE_SEL); 221 } 222 223 if (edge != GPIO_INT_BOTH_EDGES) { 224 reg += GPIO_ICR1 + ((gpio_idx & 0x10) >> 2); /* lower or upper register */ 225 bit = gpio_idx & 0xf; 226 val = readl(reg) & ~(0x3 << (bit << 1)); 227 writel(val | (edge << (bit << 1)), reg); 228 } 229 230 writel(1 << gpio_idx, port->base + GPIO_ISR); 231 232 return 0; 233 } 234 235 static void mxc_flip_edge(struct mxc_gpio_port *port, u32 gpio) 236 { 237 void __iomem *reg = port->base; 238 u32 bit, val; 239 int edge; 240 241 reg += GPIO_ICR1 + ((gpio & 0x10) >> 2); /* lower or upper register */ 242 bit = gpio & 0xf; 243 val = readl(reg); 244 edge = (val >> (bit << 1)) & 3; 245 val &= ~(0x3 << (bit << 1)); 246 if (edge == GPIO_INT_HIGH_LEV) { 247 edge = GPIO_INT_LOW_LEV; 248 pr_debug("mxc: switch GPIO %d to low trigger\n", gpio); 249 } else if (edge == GPIO_INT_LOW_LEV) { 250 edge = GPIO_INT_HIGH_LEV; 251 pr_debug("mxc: switch GPIO %d to high trigger\n", gpio); 252 } else { 253 pr_err("mxc: invalid configuration for GPIO %d: %x\n", 254 gpio, edge); 255 return; 256 } 257 writel(val | (edge << (bit << 1)), reg); 258 } 259 260 /* handle 32 interrupts in one status register */ 261 static void mxc_gpio_irq_handler(struct mxc_gpio_port *port, u32 irq_stat) 262 { 263 while (irq_stat != 0) { 264 int irqoffset = fls(irq_stat) - 1; 265 266 if (port->both_edges & (1 << irqoffset)) 267 mxc_flip_edge(port, irqoffset); 268 269 generic_handle_irq(irq_find_mapping(port->domain, irqoffset)); 270 271 irq_stat &= ~(1 << irqoffset); 272 } 273 } 274 275 /* MX1 and MX3 has one interrupt *per* gpio port */ 276 static void mx3_gpio_irq_handler(struct irq_desc *desc) 277 { 278 u32 irq_stat; 279 struct mxc_gpio_port *port = irq_desc_get_handler_data(desc); 280 struct irq_chip *chip = irq_desc_get_chip(desc); 281 282 chained_irq_enter(chip, desc); 283 284 irq_stat = readl(port->base + GPIO_ISR) & readl(port->base + GPIO_IMR); 285 286 mxc_gpio_irq_handler(port, irq_stat); 287 288 chained_irq_exit(chip, desc); 289 } 290 291 /* MX2 has one interrupt *for all* gpio ports */ 292 static void mx2_gpio_irq_handler(struct irq_desc *desc) 293 { 294 u32 irq_msk, irq_stat; 295 struct mxc_gpio_port *port; 296 struct irq_chip *chip = irq_desc_get_chip(desc); 297 298 chained_irq_enter(chip, desc); 299 300 /* walk through all interrupt status registers */ 301 list_for_each_entry(port, &mxc_gpio_ports, node) { 302 irq_msk = readl(port->base + GPIO_IMR); 303 if (!irq_msk) 304 continue; 305 306 irq_stat = readl(port->base + GPIO_ISR) & irq_msk; 307 if (irq_stat) 308 mxc_gpio_irq_handler(port, irq_stat); 309 } 310 chained_irq_exit(chip, desc); 311 } 312 313 /* 314 * Set interrupt number "irq" in the GPIO as a wake-up source. 315 * While system is running, all registered GPIO interrupts need to have 316 * wake-up enabled. When system is suspended, only selected GPIO interrupts 317 * need to have wake-up enabled. 318 * @param irq interrupt source number 319 * @param enable enable as wake-up if equal to non-zero 320 * @return This function returns 0 on success. 321 */ 322 static int gpio_set_wake_irq(struct irq_data *d, u32 enable) 323 { 324 struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d); 325 struct mxc_gpio_port *port = gc->private; 326 u32 gpio_idx = d->hwirq; 327 int ret; 328 329 if (enable) { 330 if (port->irq_high && (gpio_idx >= 16)) 331 ret = enable_irq_wake(port->irq_high); 332 else 333 ret = enable_irq_wake(port->irq); 334 } else { 335 if (port->irq_high && (gpio_idx >= 16)) 336 ret = disable_irq_wake(port->irq_high); 337 else 338 ret = disable_irq_wake(port->irq); 339 } 340 341 return ret; 342 } 343 344 static int mxc_gpio_init_gc(struct mxc_gpio_port *port, int irq_base) 345 { 346 struct irq_chip_generic *gc; 347 struct irq_chip_type *ct; 348 int rv; 349 350 gc = devm_irq_alloc_generic_chip(port->dev, "gpio-mxc", 1, irq_base, 351 port->base, handle_level_irq); 352 if (!gc) 353 return -ENOMEM; 354 gc->private = port; 355 356 ct = gc->chip_types; 357 ct->chip.irq_ack = irq_gc_ack_set_bit; 358 ct->chip.irq_mask = irq_gc_mask_clr_bit; 359 ct->chip.irq_unmask = irq_gc_mask_set_bit; 360 ct->chip.irq_set_type = gpio_set_irq_type; 361 ct->chip.irq_set_wake = gpio_set_wake_irq; 362 ct->chip.flags = IRQCHIP_MASK_ON_SUSPEND; 363 ct->regs.ack = GPIO_ISR; 364 ct->regs.mask = GPIO_IMR; 365 366 rv = devm_irq_setup_generic_chip(port->dev, gc, IRQ_MSK(32), 367 IRQ_GC_INIT_NESTED_LOCK, 368 IRQ_NOREQUEST, 0); 369 370 return rv; 371 } 372 373 static void mxc_gpio_get_hw(struct platform_device *pdev) 374 { 375 const struct of_device_id *of_id = 376 of_match_device(mxc_gpio_dt_ids, &pdev->dev); 377 enum mxc_gpio_hwtype hwtype; 378 379 if (of_id) 380 pdev->id_entry = of_id->data; 381 hwtype = pdev->id_entry->driver_data; 382 383 if (mxc_gpio_hwtype) { 384 /* 385 * The driver works with a reasonable presupposition, 386 * that is all gpio ports must be the same type when 387 * running on one soc. 388 */ 389 BUG_ON(mxc_gpio_hwtype != hwtype); 390 return; 391 } 392 393 if (hwtype == IMX35_GPIO) 394 mxc_gpio_hwdata = &imx35_gpio_hwdata; 395 else if (hwtype == IMX31_GPIO) 396 mxc_gpio_hwdata = &imx31_gpio_hwdata; 397 else 398 mxc_gpio_hwdata = &imx1_imx21_gpio_hwdata; 399 400 mxc_gpio_hwtype = hwtype; 401 } 402 403 static int mxc_gpio_to_irq(struct gpio_chip *gc, unsigned offset) 404 { 405 struct mxc_gpio_port *port = gpiochip_get_data(gc); 406 407 return irq_find_mapping(port->domain, offset); 408 } 409 410 static int mxc_gpio_probe(struct platform_device *pdev) 411 { 412 struct device_node *np = pdev->dev.of_node; 413 struct mxc_gpio_port *port; 414 int irq_count; 415 int irq_base; 416 int err; 417 418 mxc_gpio_get_hw(pdev); 419 420 port = devm_kzalloc(&pdev->dev, sizeof(*port), GFP_KERNEL); 421 if (!port) 422 return -ENOMEM; 423 424 port->dev = &pdev->dev; 425 426 port->base = devm_platform_ioremap_resource(pdev, 0); 427 if (IS_ERR(port->base)) 428 return PTR_ERR(port->base); 429 430 irq_count = platform_irq_count(pdev); 431 if (irq_count < 0) 432 return irq_count; 433 434 if (irq_count > 1) { 435 port->irq_high = platform_get_irq(pdev, 1); 436 if (port->irq_high < 0) 437 port->irq_high = 0; 438 } 439 440 port->irq = platform_get_irq(pdev, 0); 441 if (port->irq < 0) 442 return port->irq; 443 444 /* the controller clock is optional */ 445 port->clk = devm_clk_get_optional(&pdev->dev, NULL); 446 if (IS_ERR(port->clk)) 447 return PTR_ERR(port->clk); 448 449 err = clk_prepare_enable(port->clk); 450 if (err) { 451 dev_err(&pdev->dev, "Unable to enable clock.\n"); 452 return err; 453 } 454 455 if (of_device_is_compatible(np, "fsl,imx7d-gpio")) 456 port->power_off = true; 457 458 /* disable the interrupt and clear the status */ 459 writel(0, port->base + GPIO_IMR); 460 writel(~0, port->base + GPIO_ISR); 461 462 if (mxc_gpio_hwtype == IMX21_GPIO) { 463 /* 464 * Setup one handler for all GPIO interrupts. Actually setting 465 * the handler is needed only once, but doing it for every port 466 * is more robust and easier. 467 */ 468 irq_set_chained_handler(port->irq, mx2_gpio_irq_handler); 469 } else { 470 /* setup one handler for each entry */ 471 irq_set_chained_handler_and_data(port->irq, 472 mx3_gpio_irq_handler, port); 473 if (port->irq_high > 0) 474 /* setup handler for GPIO 16 to 31 */ 475 irq_set_chained_handler_and_data(port->irq_high, 476 mx3_gpio_irq_handler, 477 port); 478 } 479 480 err = bgpio_init(&port->gc, &pdev->dev, 4, 481 port->base + GPIO_PSR, 482 port->base + GPIO_DR, NULL, 483 port->base + GPIO_GDIR, NULL, 484 BGPIOF_READ_OUTPUT_REG_SET); 485 if (err) 486 goto out_bgio; 487 488 port->gc.request = gpiochip_generic_request; 489 port->gc.free = gpiochip_generic_free; 490 port->gc.to_irq = mxc_gpio_to_irq; 491 port->gc.base = (pdev->id < 0) ? of_alias_get_id(np, "gpio") * 32 : 492 pdev->id * 32; 493 494 err = devm_gpiochip_add_data(&pdev->dev, &port->gc, port); 495 if (err) 496 goto out_bgio; 497 498 irq_base = devm_irq_alloc_descs(&pdev->dev, -1, 0, 32, numa_node_id()); 499 if (irq_base < 0) { 500 err = irq_base; 501 goto out_bgio; 502 } 503 504 port->domain = irq_domain_add_legacy(np, 32, irq_base, 0, 505 &irq_domain_simple_ops, NULL); 506 if (!port->domain) { 507 err = -ENODEV; 508 goto out_bgio; 509 } 510 511 /* gpio-mxc can be a generic irq chip */ 512 err = mxc_gpio_init_gc(port, irq_base); 513 if (err < 0) 514 goto out_irqdomain_remove; 515 516 list_add_tail(&port->node, &mxc_gpio_ports); 517 518 platform_set_drvdata(pdev, port); 519 520 return 0; 521 522 out_irqdomain_remove: 523 irq_domain_remove(port->domain); 524 out_bgio: 525 clk_disable_unprepare(port->clk); 526 dev_info(&pdev->dev, "%s failed with errno %d\n", __func__, err); 527 return err; 528 } 529 530 static void mxc_gpio_save_regs(struct mxc_gpio_port *port) 531 { 532 if (!port->power_off) 533 return; 534 535 port->gpio_saved_reg.icr1 = readl(port->base + GPIO_ICR1); 536 port->gpio_saved_reg.icr2 = readl(port->base + GPIO_ICR2); 537 port->gpio_saved_reg.imr = readl(port->base + GPIO_IMR); 538 port->gpio_saved_reg.gdir = readl(port->base + GPIO_GDIR); 539 port->gpio_saved_reg.edge_sel = readl(port->base + GPIO_EDGE_SEL); 540 port->gpio_saved_reg.dr = readl(port->base + GPIO_DR); 541 } 542 543 static void mxc_gpio_restore_regs(struct mxc_gpio_port *port) 544 { 545 if (!port->power_off) 546 return; 547 548 writel(port->gpio_saved_reg.icr1, port->base + GPIO_ICR1); 549 writel(port->gpio_saved_reg.icr2, port->base + GPIO_ICR2); 550 writel(port->gpio_saved_reg.imr, port->base + GPIO_IMR); 551 writel(port->gpio_saved_reg.gdir, port->base + GPIO_GDIR); 552 writel(port->gpio_saved_reg.edge_sel, port->base + GPIO_EDGE_SEL); 553 writel(port->gpio_saved_reg.dr, port->base + GPIO_DR); 554 } 555 556 static int mxc_gpio_syscore_suspend(void) 557 { 558 struct mxc_gpio_port *port; 559 560 /* walk through all ports */ 561 list_for_each_entry(port, &mxc_gpio_ports, node) { 562 mxc_gpio_save_regs(port); 563 clk_disable_unprepare(port->clk); 564 } 565 566 return 0; 567 } 568 569 static void mxc_gpio_syscore_resume(void) 570 { 571 struct mxc_gpio_port *port; 572 int ret; 573 574 /* walk through all ports */ 575 list_for_each_entry(port, &mxc_gpio_ports, node) { 576 ret = clk_prepare_enable(port->clk); 577 if (ret) { 578 pr_err("mxc: failed to enable gpio clock %d\n", ret); 579 return; 580 } 581 mxc_gpio_restore_regs(port); 582 } 583 } 584 585 static struct syscore_ops mxc_gpio_syscore_ops = { 586 .suspend = mxc_gpio_syscore_suspend, 587 .resume = mxc_gpio_syscore_resume, 588 }; 589 590 static struct platform_driver mxc_gpio_driver = { 591 .driver = { 592 .name = "gpio-mxc", 593 .of_match_table = mxc_gpio_dt_ids, 594 .suppress_bind_attrs = true, 595 }, 596 .probe = mxc_gpio_probe, 597 .id_table = mxc_gpio_devtype, 598 }; 599 600 static int __init gpio_mxc_init(void) 601 { 602 register_syscore_ops(&mxc_gpio_syscore_ops); 603 604 return platform_driver_register(&mxc_gpio_driver); 605 } 606 subsys_initcall(gpio_mxc_init); 607