1 // SPDX-License-Identifier: GPL-2.0-only 2 /* 3 * Copyright (C) 2002 - 2005 Benjamin Herrenschmidt <benh@kernel.crashing.org> 4 * Copyright (C) 2004 John Steele Scott <toojays@toojays.net> 5 * 6 * TODO: Need a big cleanup here. Basically, we need to have different 7 * cpufreq_driver structures for the different type of HW instead of the 8 * current mess. We also need to better deal with the detection of the 9 * type of machine. 10 */ 11 12 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt 13 14 #include <linux/module.h> 15 #include <linux/types.h> 16 #include <linux/errno.h> 17 #include <linux/kernel.h> 18 #include <linux/delay.h> 19 #include <linux/sched.h> 20 #include <linux/adb.h> 21 #include <linux/pmu.h> 22 #include <linux/cpufreq.h> 23 #include <linux/init.h> 24 #include <linux/device.h> 25 #include <linux/hardirq.h> 26 #include <linux/of_device.h> 27 #include <asm/prom.h> 28 #include <asm/machdep.h> 29 #include <asm/irq.h> 30 #include <asm/pmac_feature.h> 31 #include <asm/mmu_context.h> 32 #include <asm/sections.h> 33 #include <asm/cputable.h> 34 #include <asm/time.h> 35 #include <asm/mpic.h> 36 #include <asm/keylargo.h> 37 #include <asm/switch_to.h> 38 39 /* WARNING !!! This will cause calibrate_delay() to be called, 40 * but this is an __init function ! So you MUST go edit 41 * init/main.c to make it non-init before enabling DEBUG_FREQ 42 */ 43 #undef DEBUG_FREQ 44 45 extern void low_choose_7447a_dfs(int dfs); 46 extern void low_choose_750fx_pll(int pll); 47 extern void low_sleep_handler(void); 48 49 /* 50 * Currently, PowerMac cpufreq supports only high & low frequencies 51 * that are set by the firmware 52 */ 53 static unsigned int low_freq; 54 static unsigned int hi_freq; 55 static unsigned int cur_freq; 56 static unsigned int sleep_freq; 57 static unsigned long transition_latency; 58 59 /* 60 * Different models uses different mechanisms to switch the frequency 61 */ 62 static int (*set_speed_proc)(int low_speed); 63 static unsigned int (*get_speed_proc)(void); 64 65 /* 66 * Some definitions used by the various speedprocs 67 */ 68 static u32 voltage_gpio; 69 static u32 frequency_gpio; 70 static u32 slew_done_gpio; 71 static int no_schedule; 72 static int has_cpu_l2lve; 73 static int is_pmu_based; 74 75 /* There are only two frequency states for each processor. Values 76 * are in kHz for the time being. 77 */ 78 #define CPUFREQ_HIGH 0 79 #define CPUFREQ_LOW 1 80 81 static struct cpufreq_frequency_table pmac_cpu_freqs[] = { 82 {0, CPUFREQ_HIGH, 0}, 83 {0, CPUFREQ_LOW, 0}, 84 {0, 0, CPUFREQ_TABLE_END}, 85 }; 86 87 static inline void local_delay(unsigned long ms) 88 { 89 if (no_schedule) 90 mdelay(ms); 91 else 92 msleep(ms); 93 } 94 95 #ifdef DEBUG_FREQ 96 static inline void debug_calc_bogomips(void) 97 { 98 /* This will cause a recalc of bogomips and display the 99 * result. We backup/restore the value to avoid affecting the 100 * core cpufreq framework's own calculation. 101 */ 102 unsigned long save_lpj = loops_per_jiffy; 103 calibrate_delay(); 104 loops_per_jiffy = save_lpj; 105 } 106 #endif /* DEBUG_FREQ */ 107 108 /* Switch CPU speed under 750FX CPU control 109 */ 110 static int cpu_750fx_cpu_speed(int low_speed) 111 { 112 u32 hid2; 113 114 if (low_speed == 0) { 115 /* ramping up, set voltage first */ 116 pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, voltage_gpio, 0x05); 117 /* Make sure we sleep for at least 1ms */ 118 local_delay(10); 119 120 /* tweak L2 for high voltage */ 121 if (has_cpu_l2lve) { 122 hid2 = mfspr(SPRN_HID2); 123 hid2 &= ~0x2000; 124 mtspr(SPRN_HID2, hid2); 125 } 126 } 127 #ifdef CONFIG_PPC_BOOK3S_32 128 low_choose_750fx_pll(low_speed); 129 #endif 130 if (low_speed == 1) { 131 /* tweak L2 for low voltage */ 132 if (has_cpu_l2lve) { 133 hid2 = mfspr(SPRN_HID2); 134 hid2 |= 0x2000; 135 mtspr(SPRN_HID2, hid2); 136 } 137 138 /* ramping down, set voltage last */ 139 pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, voltage_gpio, 0x04); 140 local_delay(10); 141 } 142 143 return 0; 144 } 145 146 static unsigned int cpu_750fx_get_cpu_speed(void) 147 { 148 if (mfspr(SPRN_HID1) & HID1_PS) 149 return low_freq; 150 else 151 return hi_freq; 152 } 153 154 /* Switch CPU speed using DFS */ 155 static int dfs_set_cpu_speed(int low_speed) 156 { 157 if (low_speed == 0) { 158 /* ramping up, set voltage first */ 159 pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, voltage_gpio, 0x05); 160 /* Make sure we sleep for at least 1ms */ 161 local_delay(1); 162 } 163 164 /* set frequency */ 165 #ifdef CONFIG_PPC_BOOK3S_32 166 low_choose_7447a_dfs(low_speed); 167 #endif 168 udelay(100); 169 170 if (low_speed == 1) { 171 /* ramping down, set voltage last */ 172 pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, voltage_gpio, 0x04); 173 local_delay(1); 174 } 175 176 return 0; 177 } 178 179 static unsigned int dfs_get_cpu_speed(void) 180 { 181 if (mfspr(SPRN_HID1) & HID1_DFS) 182 return low_freq; 183 else 184 return hi_freq; 185 } 186 187 188 /* Switch CPU speed using slewing GPIOs 189 */ 190 static int gpios_set_cpu_speed(int low_speed) 191 { 192 int gpio, timeout = 0; 193 194 /* If ramping up, set voltage first */ 195 if (low_speed == 0) { 196 pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, voltage_gpio, 0x05); 197 /* Delay is way too big but it's ok, we schedule */ 198 local_delay(10); 199 } 200 201 /* Set frequency */ 202 gpio = pmac_call_feature(PMAC_FTR_READ_GPIO, NULL, frequency_gpio, 0); 203 if (low_speed == ((gpio & 0x01) == 0)) 204 goto skip; 205 206 pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, frequency_gpio, 207 low_speed ? 0x04 : 0x05); 208 udelay(200); 209 do { 210 if (++timeout > 100) 211 break; 212 local_delay(1); 213 gpio = pmac_call_feature(PMAC_FTR_READ_GPIO, NULL, slew_done_gpio, 0); 214 } while((gpio & 0x02) == 0); 215 skip: 216 /* If ramping down, set voltage last */ 217 if (low_speed == 1) { 218 pmac_call_feature(PMAC_FTR_WRITE_GPIO, NULL, voltage_gpio, 0x04); 219 /* Delay is way too big but it's ok, we schedule */ 220 local_delay(10); 221 } 222 223 #ifdef DEBUG_FREQ 224 debug_calc_bogomips(); 225 #endif 226 227 return 0; 228 } 229 230 /* Switch CPU speed under PMU control 231 */ 232 static int pmu_set_cpu_speed(int low_speed) 233 { 234 struct adb_request req; 235 unsigned long save_l2cr; 236 unsigned long save_l3cr; 237 unsigned int pic_prio; 238 unsigned long flags; 239 240 preempt_disable(); 241 242 #ifdef DEBUG_FREQ 243 printk(KERN_DEBUG "HID1, before: %x\n", mfspr(SPRN_HID1)); 244 #endif 245 pmu_suspend(); 246 247 /* Disable all interrupt sources on openpic */ 248 pic_prio = mpic_cpu_get_priority(); 249 mpic_cpu_set_priority(0xf); 250 251 /* Make sure the decrementer won't interrupt us */ 252 asm volatile("mtdec %0" : : "r" (0x7fffffff)); 253 /* Make sure any pending DEC interrupt occurring while we did 254 * the above didn't re-enable the DEC */ 255 mb(); 256 asm volatile("mtdec %0" : : "r" (0x7fffffff)); 257 258 /* We can now disable MSR_EE */ 259 local_irq_save(flags); 260 261 /* Giveup the FPU & vec */ 262 enable_kernel_fp(); 263 264 #ifdef CONFIG_ALTIVEC 265 if (cpu_has_feature(CPU_FTR_ALTIVEC)) 266 enable_kernel_altivec(); 267 #endif /* CONFIG_ALTIVEC */ 268 269 /* Save & disable L2 and L3 caches */ 270 save_l3cr = _get_L3CR(); /* (returns -1 if not available) */ 271 save_l2cr = _get_L2CR(); /* (returns -1 if not available) */ 272 273 /* Send the new speed command. My assumption is that this command 274 * will cause PLL_CFG[0..3] to be changed next time CPU goes to sleep 275 */ 276 pmu_request(&req, NULL, 6, PMU_CPU_SPEED, 'W', 'O', 'O', 'F', low_speed); 277 while (!req.complete) 278 pmu_poll(); 279 280 /* Prepare the northbridge for the speed transition */ 281 pmac_call_feature(PMAC_FTR_SLEEP_STATE,NULL,1,1); 282 283 /* Call low level code to backup CPU state and recover from 284 * hardware reset 285 */ 286 low_sleep_handler(); 287 288 /* Restore the northbridge */ 289 pmac_call_feature(PMAC_FTR_SLEEP_STATE,NULL,1,0); 290 291 /* Restore L2 cache */ 292 if (save_l2cr != 0xffffffff && (save_l2cr & L2CR_L2E) != 0) 293 _set_L2CR(save_l2cr); 294 /* Restore L3 cache */ 295 if (save_l3cr != 0xffffffff && (save_l3cr & L3CR_L3E) != 0) 296 _set_L3CR(save_l3cr); 297 298 /* Restore userland MMU context */ 299 switch_mmu_context(NULL, current->active_mm, NULL); 300 301 #ifdef DEBUG_FREQ 302 printk(KERN_DEBUG "HID1, after: %x\n", mfspr(SPRN_HID1)); 303 #endif 304 305 /* Restore low level PMU operations */ 306 pmu_unlock(); 307 308 /* 309 * Restore decrementer; we'll take a decrementer interrupt 310 * as soon as interrupts are re-enabled and the generic 311 * clockevents code will reprogram it with the right value. 312 */ 313 set_dec(1); 314 315 /* Restore interrupts */ 316 mpic_cpu_set_priority(pic_prio); 317 318 /* Let interrupts flow again ... */ 319 local_irq_restore(flags); 320 321 #ifdef DEBUG_FREQ 322 debug_calc_bogomips(); 323 #endif 324 325 pmu_resume(); 326 327 preempt_enable(); 328 329 return 0; 330 } 331 332 static int do_set_cpu_speed(struct cpufreq_policy *policy, int speed_mode) 333 { 334 unsigned long l3cr; 335 static unsigned long prev_l3cr; 336 337 if (speed_mode == CPUFREQ_LOW && 338 cpu_has_feature(CPU_FTR_L3CR)) { 339 l3cr = _get_L3CR(); 340 if (l3cr & L3CR_L3E) { 341 prev_l3cr = l3cr; 342 _set_L3CR(0); 343 } 344 } 345 set_speed_proc(speed_mode == CPUFREQ_LOW); 346 if (speed_mode == CPUFREQ_HIGH && 347 cpu_has_feature(CPU_FTR_L3CR)) { 348 l3cr = _get_L3CR(); 349 if ((prev_l3cr & L3CR_L3E) && l3cr != prev_l3cr) 350 _set_L3CR(prev_l3cr); 351 } 352 cur_freq = (speed_mode == CPUFREQ_HIGH) ? hi_freq : low_freq; 353 354 return 0; 355 } 356 357 static unsigned int pmac_cpufreq_get_speed(unsigned int cpu) 358 { 359 return cur_freq; 360 } 361 362 static int pmac_cpufreq_target( struct cpufreq_policy *policy, 363 unsigned int index) 364 { 365 int rc; 366 367 rc = do_set_cpu_speed(policy, index); 368 369 ppc_proc_freq = cur_freq * 1000ul; 370 return rc; 371 } 372 373 static int pmac_cpufreq_cpu_init(struct cpufreq_policy *policy) 374 { 375 return cpufreq_generic_init(policy, pmac_cpu_freqs, transition_latency); 376 } 377 378 static u32 read_gpio(struct device_node *np) 379 { 380 const u32 *reg = of_get_property(np, "reg", NULL); 381 u32 offset; 382 383 if (reg == NULL) 384 return 0; 385 /* That works for all keylargos but shall be fixed properly 386 * some day... The problem is that it seems we can't rely 387 * on the "reg" property of the GPIO nodes, they are either 388 * relative to the base of KeyLargo or to the base of the 389 * GPIO space, and the device-tree doesn't help. 390 */ 391 offset = *reg; 392 if (offset < KEYLARGO_GPIO_LEVELS0) 393 offset += KEYLARGO_GPIO_LEVELS0; 394 return offset; 395 } 396 397 static int pmac_cpufreq_suspend(struct cpufreq_policy *policy) 398 { 399 /* Ok, this could be made a bit smarter, but let's be robust for now. We 400 * always force a speed change to high speed before sleep, to make sure 401 * we have appropriate voltage and/or bus speed for the wakeup process, 402 * and to make sure our loops_per_jiffies are "good enough", that is will 403 * not cause too short delays if we sleep in low speed and wake in high 404 * speed.. 405 */ 406 no_schedule = 1; 407 sleep_freq = cur_freq; 408 if (cur_freq == low_freq && !is_pmu_based) 409 do_set_cpu_speed(policy, CPUFREQ_HIGH); 410 return 0; 411 } 412 413 static int pmac_cpufreq_resume(struct cpufreq_policy *policy) 414 { 415 /* If we resume, first check if we have a get() function */ 416 if (get_speed_proc) 417 cur_freq = get_speed_proc(); 418 else 419 cur_freq = 0; 420 421 /* We don't, hrm... we don't really know our speed here, best 422 * is that we force a switch to whatever it was, which is 423 * probably high speed due to our suspend() routine 424 */ 425 do_set_cpu_speed(policy, sleep_freq == low_freq ? 426 CPUFREQ_LOW : CPUFREQ_HIGH); 427 428 ppc_proc_freq = cur_freq * 1000ul; 429 430 no_schedule = 0; 431 return 0; 432 } 433 434 static struct cpufreq_driver pmac_cpufreq_driver = { 435 .verify = cpufreq_generic_frequency_table_verify, 436 .target_index = pmac_cpufreq_target, 437 .get = pmac_cpufreq_get_speed, 438 .init = pmac_cpufreq_cpu_init, 439 .suspend = pmac_cpufreq_suspend, 440 .resume = pmac_cpufreq_resume, 441 .flags = CPUFREQ_PM_NO_WARN | 442 CPUFREQ_NO_AUTO_DYNAMIC_SWITCHING, 443 .attr = cpufreq_generic_attr, 444 .name = "powermac", 445 }; 446 447 448 static int pmac_cpufreq_init_MacRISC3(struct device_node *cpunode) 449 { 450 struct device_node *volt_gpio_np = of_find_node_by_name(NULL, 451 "voltage-gpio"); 452 struct device_node *freq_gpio_np = of_find_node_by_name(NULL, 453 "frequency-gpio"); 454 struct device_node *slew_done_gpio_np = of_find_node_by_name(NULL, 455 "slewing-done"); 456 const u32 *value; 457 458 /* 459 * Check to see if it's GPIO driven or PMU only 460 * 461 * The way we extract the GPIO address is slightly hackish, but it 462 * works well enough for now. We need to abstract the whole GPIO 463 * stuff sooner or later anyway 464 */ 465 466 if (volt_gpio_np) 467 voltage_gpio = read_gpio(volt_gpio_np); 468 if (freq_gpio_np) 469 frequency_gpio = read_gpio(freq_gpio_np); 470 if (slew_done_gpio_np) 471 slew_done_gpio = read_gpio(slew_done_gpio_np); 472 473 /* If we use the frequency GPIOs, calculate the min/max speeds based 474 * on the bus frequencies 475 */ 476 if (frequency_gpio && slew_done_gpio) { 477 int lenp, rc; 478 const u32 *freqs, *ratio; 479 480 freqs = of_get_property(cpunode, "bus-frequencies", &lenp); 481 lenp /= sizeof(u32); 482 if (freqs == NULL || lenp != 2) { 483 pr_err("bus-frequencies incorrect or missing\n"); 484 return 1; 485 } 486 ratio = of_get_property(cpunode, "processor-to-bus-ratio*2", 487 NULL); 488 if (ratio == NULL) { 489 pr_err("processor-to-bus-ratio*2 missing\n"); 490 return 1; 491 } 492 493 /* Get the min/max bus frequencies */ 494 low_freq = min(freqs[0], freqs[1]); 495 hi_freq = max(freqs[0], freqs[1]); 496 497 /* Grrrr.. It _seems_ that the device-tree is lying on the low bus 498 * frequency, it claims it to be around 84Mhz on some models while 499 * it appears to be approx. 101Mhz on all. Let's hack around here... 500 * fortunately, we don't need to be too precise 501 */ 502 if (low_freq < 98000000) 503 low_freq = 101000000; 504 505 /* Convert those to CPU core clocks */ 506 low_freq = (low_freq * (*ratio)) / 2000; 507 hi_freq = (hi_freq * (*ratio)) / 2000; 508 509 /* Now we get the frequencies, we read the GPIO to see what is out current 510 * speed 511 */ 512 rc = pmac_call_feature(PMAC_FTR_READ_GPIO, NULL, frequency_gpio, 0); 513 cur_freq = (rc & 0x01) ? hi_freq : low_freq; 514 515 set_speed_proc = gpios_set_cpu_speed; 516 return 1; 517 } 518 519 /* If we use the PMU, look for the min & max frequencies in the 520 * device-tree 521 */ 522 value = of_get_property(cpunode, "min-clock-frequency", NULL); 523 if (!value) 524 return 1; 525 low_freq = (*value) / 1000; 526 /* The PowerBook G4 12" (PowerBook6,1) has an error in the device-tree 527 * here */ 528 if (low_freq < 100000) 529 low_freq *= 10; 530 531 value = of_get_property(cpunode, "max-clock-frequency", NULL); 532 if (!value) 533 return 1; 534 hi_freq = (*value) / 1000; 535 set_speed_proc = pmu_set_cpu_speed; 536 is_pmu_based = 1; 537 538 return 0; 539 } 540 541 static int pmac_cpufreq_init_7447A(struct device_node *cpunode) 542 { 543 struct device_node *volt_gpio_np; 544 545 if (of_get_property(cpunode, "dynamic-power-step", NULL) == NULL) 546 return 1; 547 548 volt_gpio_np = of_find_node_by_name(NULL, "cpu-vcore-select"); 549 if (volt_gpio_np) 550 voltage_gpio = read_gpio(volt_gpio_np); 551 of_node_put(volt_gpio_np); 552 if (!voltage_gpio){ 553 pr_err("missing cpu-vcore-select gpio\n"); 554 return 1; 555 } 556 557 /* OF only reports the high frequency */ 558 hi_freq = cur_freq; 559 low_freq = cur_freq/2; 560 561 /* Read actual frequency from CPU */ 562 cur_freq = dfs_get_cpu_speed(); 563 set_speed_proc = dfs_set_cpu_speed; 564 get_speed_proc = dfs_get_cpu_speed; 565 566 return 0; 567 } 568 569 static int pmac_cpufreq_init_750FX(struct device_node *cpunode) 570 { 571 struct device_node *volt_gpio_np; 572 u32 pvr; 573 const u32 *value; 574 575 if (of_get_property(cpunode, "dynamic-power-step", NULL) == NULL) 576 return 1; 577 578 hi_freq = cur_freq; 579 value = of_get_property(cpunode, "reduced-clock-frequency", NULL); 580 if (!value) 581 return 1; 582 low_freq = (*value) / 1000; 583 584 volt_gpio_np = of_find_node_by_name(NULL, "cpu-vcore-select"); 585 if (volt_gpio_np) 586 voltage_gpio = read_gpio(volt_gpio_np); 587 588 of_node_put(volt_gpio_np); 589 pvr = mfspr(SPRN_PVR); 590 has_cpu_l2lve = !((pvr & 0xf00) == 0x100); 591 592 set_speed_proc = cpu_750fx_cpu_speed; 593 get_speed_proc = cpu_750fx_get_cpu_speed; 594 cur_freq = cpu_750fx_get_cpu_speed(); 595 596 return 0; 597 } 598 599 /* Currently, we support the following machines: 600 * 601 * - Titanium PowerBook 1Ghz (PMU based, 667Mhz & 1Ghz) 602 * - Titanium PowerBook 800 (PMU based, 667Mhz & 800Mhz) 603 * - Titanium PowerBook 400 (PMU based, 300Mhz & 400Mhz) 604 * - Titanium PowerBook 500 (PMU based, 300Mhz & 500Mhz) 605 * - iBook2 500/600 (PMU based, 400Mhz & 500/600Mhz) 606 * - iBook2 700 (CPU based, 400Mhz & 700Mhz, support low voltage) 607 * - Recent MacRISC3 laptops 608 * - All new machines with 7447A CPUs 609 */ 610 static int __init pmac_cpufreq_setup(void) 611 { 612 struct device_node *cpunode; 613 const u32 *value; 614 615 if (strstr(boot_command_line, "nocpufreq")) 616 return 0; 617 618 /* Get first CPU node */ 619 cpunode = of_cpu_device_node_get(0); 620 if (!cpunode) 621 goto out; 622 623 /* Get current cpu clock freq */ 624 value = of_get_property(cpunode, "clock-frequency", NULL); 625 if (!value) 626 goto out; 627 cur_freq = (*value) / 1000; 628 629 /* Check for 7447A based MacRISC3 */ 630 if (of_machine_is_compatible("MacRISC3") && 631 of_get_property(cpunode, "dynamic-power-step", NULL) && 632 PVR_VER(mfspr(SPRN_PVR)) == 0x8003) { 633 pmac_cpufreq_init_7447A(cpunode); 634 635 /* Allow dynamic switching */ 636 transition_latency = 8000000; 637 pmac_cpufreq_driver.flags &= ~CPUFREQ_NO_AUTO_DYNAMIC_SWITCHING; 638 /* Check for other MacRISC3 machines */ 639 } else if (of_machine_is_compatible("PowerBook3,4") || 640 of_machine_is_compatible("PowerBook3,5") || 641 of_machine_is_compatible("MacRISC3")) { 642 pmac_cpufreq_init_MacRISC3(cpunode); 643 /* Else check for iBook2 500/600 */ 644 } else if (of_machine_is_compatible("PowerBook4,1")) { 645 hi_freq = cur_freq; 646 low_freq = 400000; 647 set_speed_proc = pmu_set_cpu_speed; 648 is_pmu_based = 1; 649 } 650 /* Else check for TiPb 550 */ 651 else if (of_machine_is_compatible("PowerBook3,3") && cur_freq == 550000) { 652 hi_freq = cur_freq; 653 low_freq = 500000; 654 set_speed_proc = pmu_set_cpu_speed; 655 is_pmu_based = 1; 656 } 657 /* Else check for TiPb 400 & 500 */ 658 else if (of_machine_is_compatible("PowerBook3,2")) { 659 /* We only know about the 400 MHz and the 500Mhz model 660 * they both have 300 MHz as low frequency 661 */ 662 if (cur_freq < 350000 || cur_freq > 550000) 663 goto out; 664 hi_freq = cur_freq; 665 low_freq = 300000; 666 set_speed_proc = pmu_set_cpu_speed; 667 is_pmu_based = 1; 668 } 669 /* Else check for 750FX */ 670 else if (PVR_VER(mfspr(SPRN_PVR)) == 0x7000) 671 pmac_cpufreq_init_750FX(cpunode); 672 out: 673 of_node_put(cpunode); 674 if (set_speed_proc == NULL) 675 return -ENODEV; 676 677 pmac_cpu_freqs[CPUFREQ_LOW].frequency = low_freq; 678 pmac_cpu_freqs[CPUFREQ_HIGH].frequency = hi_freq; 679 ppc_proc_freq = cur_freq * 1000ul; 680 681 pr_info("Registering PowerMac CPU frequency driver\n"); 682 pr_info("Low: %d Mhz, High: %d Mhz, Boot: %d Mhz\n", 683 low_freq/1000, hi_freq/1000, cur_freq/1000); 684 685 return cpufreq_register_driver(&pmac_cpufreq_driver); 686 } 687 688 module_init(pmac_cpufreq_setup); 689 690