1 // SPDX-License-Identifier: GPL-2.0-only 2 /* 3 * sleep.c - ACPI sleep support. 4 * 5 * Copyright (c) 2005 Alexey Starikovskiy <alexey.y.starikovskiy@intel.com> 6 * Copyright (c) 2004 David Shaohua Li <shaohua.li@intel.com> 7 * Copyright (c) 2000-2003 Patrick Mochel 8 * Copyright (c) 2003 Open Source Development Lab 9 */ 10 11 #include <linux/delay.h> 12 #include <linux/irq.h> 13 #include <linux/dmi.h> 14 #include <linux/device.h> 15 #include <linux/interrupt.h> 16 #include <linux/suspend.h> 17 #include <linux/reboot.h> 18 #include <linux/acpi.h> 19 #include <linux/module.h> 20 #include <linux/syscore_ops.h> 21 #include <asm/io.h> 22 #include <trace/events/power.h> 23 24 #include "internal.h" 25 #include "sleep.h" 26 27 /* 28 * Some HW-full platforms do not have _S5, so they may need 29 * to leverage efi power off for a shutdown. 30 */ 31 bool acpi_no_s5; 32 static u8 sleep_states[ACPI_S_STATE_COUNT]; 33 34 static void acpi_sleep_tts_switch(u32 acpi_state) 35 { 36 acpi_status status; 37 38 status = acpi_execute_simple_method(NULL, "\\_TTS", acpi_state); 39 if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) { 40 /* 41 * OS can't evaluate the _TTS object correctly. Some warning 42 * message will be printed. But it won't break anything. 43 */ 44 printk(KERN_NOTICE "Failure in evaluating _TTS object\n"); 45 } 46 } 47 48 static int tts_notify_reboot(struct notifier_block *this, 49 unsigned long code, void *x) 50 { 51 acpi_sleep_tts_switch(ACPI_STATE_S5); 52 return NOTIFY_DONE; 53 } 54 55 static struct notifier_block tts_notifier = { 56 .notifier_call = tts_notify_reboot, 57 .next = NULL, 58 .priority = 0, 59 }; 60 61 static int acpi_sleep_prepare(u32 acpi_state) 62 { 63 #ifdef CONFIG_ACPI_SLEEP 64 unsigned long acpi_wakeup_address; 65 66 /* do we have a wakeup address for S2 and S3? */ 67 if (acpi_state == ACPI_STATE_S3) { 68 acpi_wakeup_address = acpi_get_wakeup_address(); 69 if (!acpi_wakeup_address) 70 return -EFAULT; 71 acpi_set_waking_vector(acpi_wakeup_address); 72 73 } 74 ACPI_FLUSH_CPU_CACHE(); 75 #endif 76 printk(KERN_INFO PREFIX "Preparing to enter system sleep state S%d\n", 77 acpi_state); 78 acpi_enable_wakeup_devices(acpi_state); 79 acpi_enter_sleep_state_prep(acpi_state); 80 return 0; 81 } 82 83 bool acpi_sleep_state_supported(u8 sleep_state) 84 { 85 acpi_status status; 86 u8 type_a, type_b; 87 88 status = acpi_get_sleep_type_data(sleep_state, &type_a, &type_b); 89 return ACPI_SUCCESS(status) && (!acpi_gbl_reduced_hardware 90 || (acpi_gbl_FADT.sleep_control.address 91 && acpi_gbl_FADT.sleep_status.address)); 92 } 93 94 #ifdef CONFIG_ACPI_SLEEP 95 static bool sleep_no_lps0 __read_mostly; 96 module_param(sleep_no_lps0, bool, 0644); 97 MODULE_PARM_DESC(sleep_no_lps0, "Do not use the special LPS0 device interface"); 98 99 static u32 acpi_target_sleep_state = ACPI_STATE_S0; 100 101 u32 acpi_target_system_state(void) 102 { 103 return acpi_target_sleep_state; 104 } 105 EXPORT_SYMBOL_GPL(acpi_target_system_state); 106 107 static bool pwr_btn_event_pending; 108 109 /* 110 * The ACPI specification wants us to save NVS memory regions during hibernation 111 * and to restore them during the subsequent resume. Windows does that also for 112 * suspend to RAM. However, it is known that this mechanism does not work on 113 * all machines, so we allow the user to disable it with the help of the 114 * 'acpi_sleep=nonvs' kernel command line option. 115 */ 116 static bool nvs_nosave; 117 118 void __init acpi_nvs_nosave(void) 119 { 120 nvs_nosave = true; 121 } 122 123 /* 124 * The ACPI specification wants us to save NVS memory regions during hibernation 125 * but says nothing about saving NVS during S3. Not all versions of Windows 126 * save NVS on S3 suspend either, and it is clear that not all systems need 127 * NVS to be saved at S3 time. To improve suspend/resume time, allow the 128 * user to disable saving NVS on S3 if their system does not require it, but 129 * continue to save/restore NVS for S4 as specified. 130 */ 131 static bool nvs_nosave_s3; 132 133 void __init acpi_nvs_nosave_s3(void) 134 { 135 nvs_nosave_s3 = true; 136 } 137 138 static int __init init_nvs_save_s3(const struct dmi_system_id *d) 139 { 140 nvs_nosave_s3 = false; 141 return 0; 142 } 143 144 /* 145 * ACPI 1.0 wants us to execute _PTS before suspending devices, so we allow the 146 * user to request that behavior by using the 'acpi_old_suspend_ordering' 147 * kernel command line option that causes the following variable to be set. 148 */ 149 static bool old_suspend_ordering; 150 151 void __init acpi_old_suspend_ordering(void) 152 { 153 old_suspend_ordering = true; 154 } 155 156 static int __init init_old_suspend_ordering(const struct dmi_system_id *d) 157 { 158 acpi_old_suspend_ordering(); 159 return 0; 160 } 161 162 static int __init init_nvs_nosave(const struct dmi_system_id *d) 163 { 164 acpi_nvs_nosave(); 165 return 0; 166 } 167 168 static bool acpi_sleep_default_s3; 169 170 static int __init init_default_s3(const struct dmi_system_id *d) 171 { 172 acpi_sleep_default_s3 = true; 173 return 0; 174 } 175 176 static const struct dmi_system_id acpisleep_dmi_table[] __initconst = { 177 { 178 .callback = init_old_suspend_ordering, 179 .ident = "Abit KN9 (nForce4 variant)", 180 .matches = { 181 DMI_MATCH(DMI_BOARD_VENDOR, "http://www.abit.com.tw/"), 182 DMI_MATCH(DMI_BOARD_NAME, "KN9 Series(NF-CK804)"), 183 }, 184 }, 185 { 186 .callback = init_old_suspend_ordering, 187 .ident = "HP xw4600 Workstation", 188 .matches = { 189 DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"), 190 DMI_MATCH(DMI_PRODUCT_NAME, "HP xw4600 Workstation"), 191 }, 192 }, 193 { 194 .callback = init_old_suspend_ordering, 195 .ident = "Asus Pundit P1-AH2 (M2N8L motherboard)", 196 .matches = { 197 DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTek Computer INC."), 198 DMI_MATCH(DMI_BOARD_NAME, "M2N8L"), 199 }, 200 }, 201 { 202 .callback = init_old_suspend_ordering, 203 .ident = "Panasonic CF51-2L", 204 .matches = { 205 DMI_MATCH(DMI_BOARD_VENDOR, 206 "Matsushita Electric Industrial Co.,Ltd."), 207 DMI_MATCH(DMI_BOARD_NAME, "CF51-2L"), 208 }, 209 }, 210 { 211 .callback = init_nvs_nosave, 212 .ident = "Sony Vaio VGN-FW41E_H", 213 .matches = { 214 DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"), 215 DMI_MATCH(DMI_PRODUCT_NAME, "VGN-FW41E_H"), 216 }, 217 }, 218 { 219 .callback = init_nvs_nosave, 220 .ident = "Sony Vaio VGN-FW21E", 221 .matches = { 222 DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"), 223 DMI_MATCH(DMI_PRODUCT_NAME, "VGN-FW21E"), 224 }, 225 }, 226 { 227 .callback = init_nvs_nosave, 228 .ident = "Sony Vaio VGN-FW21M", 229 .matches = { 230 DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"), 231 DMI_MATCH(DMI_PRODUCT_NAME, "VGN-FW21M"), 232 }, 233 }, 234 { 235 .callback = init_nvs_nosave, 236 .ident = "Sony Vaio VPCEB17FX", 237 .matches = { 238 DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"), 239 DMI_MATCH(DMI_PRODUCT_NAME, "VPCEB17FX"), 240 }, 241 }, 242 { 243 .callback = init_nvs_nosave, 244 .ident = "Sony Vaio VGN-SR11M", 245 .matches = { 246 DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"), 247 DMI_MATCH(DMI_PRODUCT_NAME, "VGN-SR11M"), 248 }, 249 }, 250 { 251 .callback = init_nvs_nosave, 252 .ident = "Everex StepNote Series", 253 .matches = { 254 DMI_MATCH(DMI_SYS_VENDOR, "Everex Systems, Inc."), 255 DMI_MATCH(DMI_PRODUCT_NAME, "Everex StepNote Series"), 256 }, 257 }, 258 { 259 .callback = init_nvs_nosave, 260 .ident = "Sony Vaio VPCEB1Z1E", 261 .matches = { 262 DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"), 263 DMI_MATCH(DMI_PRODUCT_NAME, "VPCEB1Z1E"), 264 }, 265 }, 266 { 267 .callback = init_nvs_nosave, 268 .ident = "Sony Vaio VGN-NW130D", 269 .matches = { 270 DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"), 271 DMI_MATCH(DMI_PRODUCT_NAME, "VGN-NW130D"), 272 }, 273 }, 274 { 275 .callback = init_nvs_nosave, 276 .ident = "Sony Vaio VPCCW29FX", 277 .matches = { 278 DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"), 279 DMI_MATCH(DMI_PRODUCT_NAME, "VPCCW29FX"), 280 }, 281 }, 282 { 283 .callback = init_nvs_nosave, 284 .ident = "Averatec AV1020-ED2", 285 .matches = { 286 DMI_MATCH(DMI_SYS_VENDOR, "AVERATEC"), 287 DMI_MATCH(DMI_PRODUCT_NAME, "1000 Series"), 288 }, 289 }, 290 { 291 .callback = init_old_suspend_ordering, 292 .ident = "Asus A8N-SLI DELUXE", 293 .matches = { 294 DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."), 295 DMI_MATCH(DMI_BOARD_NAME, "A8N-SLI DELUXE"), 296 }, 297 }, 298 { 299 .callback = init_old_suspend_ordering, 300 .ident = "Asus A8N-SLI Premium", 301 .matches = { 302 DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."), 303 DMI_MATCH(DMI_BOARD_NAME, "A8N-SLI Premium"), 304 }, 305 }, 306 { 307 .callback = init_nvs_nosave, 308 .ident = "Sony Vaio VGN-SR26GN_P", 309 .matches = { 310 DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"), 311 DMI_MATCH(DMI_PRODUCT_NAME, "VGN-SR26GN_P"), 312 }, 313 }, 314 { 315 .callback = init_nvs_nosave, 316 .ident = "Sony Vaio VPCEB1S1E", 317 .matches = { 318 DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"), 319 DMI_MATCH(DMI_PRODUCT_NAME, "VPCEB1S1E"), 320 }, 321 }, 322 { 323 .callback = init_nvs_nosave, 324 .ident = "Sony Vaio VGN-FW520F", 325 .matches = { 326 DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"), 327 DMI_MATCH(DMI_PRODUCT_NAME, "VGN-FW520F"), 328 }, 329 }, 330 { 331 .callback = init_nvs_nosave, 332 .ident = "Asus K54C", 333 .matches = { 334 DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK Computer Inc."), 335 DMI_MATCH(DMI_PRODUCT_NAME, "K54C"), 336 }, 337 }, 338 { 339 .callback = init_nvs_nosave, 340 .ident = "Asus K54HR", 341 .matches = { 342 DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK Computer Inc."), 343 DMI_MATCH(DMI_PRODUCT_NAME, "K54HR"), 344 }, 345 }, 346 { 347 .callback = init_nvs_save_s3, 348 .ident = "Asus 1025C", 349 .matches = { 350 DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."), 351 DMI_MATCH(DMI_PRODUCT_NAME, "1025C"), 352 }, 353 }, 354 /* 355 * https://bugzilla.kernel.org/show_bug.cgi?id=189431 356 * Lenovo G50-45 is a platform later than 2012, but needs nvs memory 357 * saving during S3. 358 */ 359 { 360 .callback = init_nvs_save_s3, 361 .ident = "Lenovo G50-45", 362 .matches = { 363 DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"), 364 DMI_MATCH(DMI_PRODUCT_NAME, "80E3"), 365 }, 366 }, 367 /* 368 * ThinkPad X1 Tablet(2016) cannot do suspend-to-idle using 369 * the Low Power S0 Idle firmware interface (see 370 * https://bugzilla.kernel.org/show_bug.cgi?id=199057). 371 */ 372 { 373 .callback = init_default_s3, 374 .ident = "ThinkPad X1 Tablet(2016)", 375 .matches = { 376 DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"), 377 DMI_MATCH(DMI_PRODUCT_NAME, "20GGA00L00"), 378 }, 379 }, 380 {}, 381 }; 382 383 static bool ignore_blacklist; 384 385 void __init acpi_sleep_no_blacklist(void) 386 { 387 ignore_blacklist = true; 388 } 389 390 static void __init acpi_sleep_dmi_check(void) 391 { 392 if (ignore_blacklist) 393 return; 394 395 if (dmi_get_bios_year() >= 2012) 396 acpi_nvs_nosave_s3(); 397 398 dmi_check_system(acpisleep_dmi_table); 399 } 400 401 /** 402 * acpi_pm_freeze - Disable the GPEs and suspend EC transactions. 403 */ 404 static int acpi_pm_freeze(void) 405 { 406 acpi_disable_all_gpes(); 407 acpi_os_wait_events_complete(); 408 acpi_ec_block_transactions(); 409 return 0; 410 } 411 412 /** 413 * acpi_pre_suspend - Enable wakeup devices, "freeze" EC and save NVS. 414 */ 415 static int acpi_pm_pre_suspend(void) 416 { 417 acpi_pm_freeze(); 418 return suspend_nvs_save(); 419 } 420 421 /** 422 * __acpi_pm_prepare - Prepare the platform to enter the target state. 423 * 424 * If necessary, set the firmware waking vector and do arch-specific 425 * nastiness to get the wakeup code to the waking vector. 426 */ 427 static int __acpi_pm_prepare(void) 428 { 429 int error = acpi_sleep_prepare(acpi_target_sleep_state); 430 if (error) 431 acpi_target_sleep_state = ACPI_STATE_S0; 432 433 return error; 434 } 435 436 /** 437 * acpi_pm_prepare - Prepare the platform to enter the target sleep 438 * state and disable the GPEs. 439 */ 440 static int acpi_pm_prepare(void) 441 { 442 int error = __acpi_pm_prepare(); 443 if (!error) 444 error = acpi_pm_pre_suspend(); 445 446 return error; 447 } 448 449 /** 450 * acpi_pm_finish - Instruct the platform to leave a sleep state. 451 * 452 * This is called after we wake back up (or if entering the sleep state 453 * failed). 454 */ 455 static void acpi_pm_finish(void) 456 { 457 struct acpi_device *pwr_btn_adev; 458 u32 acpi_state = acpi_target_sleep_state; 459 460 acpi_ec_unblock_transactions(); 461 suspend_nvs_free(); 462 463 if (acpi_state == ACPI_STATE_S0) 464 return; 465 466 printk(KERN_INFO PREFIX "Waking up from system sleep state S%d\n", 467 acpi_state); 468 acpi_disable_wakeup_devices(acpi_state); 469 acpi_leave_sleep_state(acpi_state); 470 471 /* reset firmware waking vector */ 472 acpi_set_waking_vector(0); 473 474 acpi_target_sleep_state = ACPI_STATE_S0; 475 476 acpi_resume_power_resources(); 477 478 /* If we were woken with the fixed power button, provide a small 479 * hint to userspace in the form of a wakeup event on the fixed power 480 * button device (if it can be found). 481 * 482 * We delay the event generation til now, as the PM layer requires 483 * timekeeping to be running before we generate events. */ 484 if (!pwr_btn_event_pending) 485 return; 486 487 pwr_btn_event_pending = false; 488 pwr_btn_adev = acpi_dev_get_first_match_dev(ACPI_BUTTON_HID_POWERF, 489 NULL, -1); 490 if (pwr_btn_adev) { 491 pm_wakeup_event(&pwr_btn_adev->dev, 0); 492 acpi_dev_put(pwr_btn_adev); 493 } 494 } 495 496 /** 497 * acpi_pm_start - Start system PM transition. 498 */ 499 static void acpi_pm_start(u32 acpi_state) 500 { 501 acpi_target_sleep_state = acpi_state; 502 acpi_sleep_tts_switch(acpi_target_sleep_state); 503 acpi_scan_lock_acquire(); 504 } 505 506 /** 507 * acpi_pm_end - Finish up system PM transition. 508 */ 509 static void acpi_pm_end(void) 510 { 511 acpi_turn_off_unused_power_resources(); 512 acpi_scan_lock_release(); 513 /* 514 * This is necessary in case acpi_pm_finish() is not called during a 515 * failing transition to a sleep state. 516 */ 517 acpi_target_sleep_state = ACPI_STATE_S0; 518 acpi_sleep_tts_switch(acpi_target_sleep_state); 519 } 520 #else /* !CONFIG_ACPI_SLEEP */ 521 #define sleep_no_lps0 (1) 522 #define acpi_target_sleep_state ACPI_STATE_S0 523 #define acpi_sleep_default_s3 (1) 524 static inline void acpi_sleep_dmi_check(void) {} 525 #endif /* CONFIG_ACPI_SLEEP */ 526 527 #ifdef CONFIG_SUSPEND 528 static u32 acpi_suspend_states[] = { 529 [PM_SUSPEND_ON] = ACPI_STATE_S0, 530 [PM_SUSPEND_STANDBY] = ACPI_STATE_S1, 531 [PM_SUSPEND_MEM] = ACPI_STATE_S3, 532 [PM_SUSPEND_MAX] = ACPI_STATE_S5 533 }; 534 535 /** 536 * acpi_suspend_begin - Set the target system sleep state to the state 537 * associated with given @pm_state, if supported. 538 */ 539 static int acpi_suspend_begin(suspend_state_t pm_state) 540 { 541 u32 acpi_state = acpi_suspend_states[pm_state]; 542 int error; 543 544 error = (nvs_nosave || nvs_nosave_s3) ? 0 : suspend_nvs_alloc(); 545 if (error) 546 return error; 547 548 if (!sleep_states[acpi_state]) { 549 pr_err("ACPI does not support sleep state S%u\n", acpi_state); 550 return -ENOSYS; 551 } 552 if (acpi_state > ACPI_STATE_S1) 553 pm_set_suspend_via_firmware(); 554 555 acpi_pm_start(acpi_state); 556 return 0; 557 } 558 559 /** 560 * acpi_suspend_enter - Actually enter a sleep state. 561 * @pm_state: ignored 562 * 563 * Flush caches and go to sleep. For STR we have to call arch-specific 564 * assembly, which in turn call acpi_enter_sleep_state(). 565 * It's unfortunate, but it works. Please fix if you're feeling frisky. 566 */ 567 static int acpi_suspend_enter(suspend_state_t pm_state) 568 { 569 acpi_status status = AE_OK; 570 u32 acpi_state = acpi_target_sleep_state; 571 int error; 572 573 ACPI_FLUSH_CPU_CACHE(); 574 575 trace_suspend_resume(TPS("acpi_suspend"), acpi_state, true); 576 switch (acpi_state) { 577 case ACPI_STATE_S1: 578 barrier(); 579 status = acpi_enter_sleep_state(acpi_state); 580 break; 581 582 case ACPI_STATE_S3: 583 if (!acpi_suspend_lowlevel) 584 return -ENOSYS; 585 error = acpi_suspend_lowlevel(); 586 if (error) 587 return error; 588 pr_info(PREFIX "Low-level resume complete\n"); 589 pm_set_resume_via_firmware(); 590 break; 591 } 592 trace_suspend_resume(TPS("acpi_suspend"), acpi_state, false); 593 594 /* This violates the spec but is required for bug compatibility. */ 595 acpi_write_bit_register(ACPI_BITREG_SCI_ENABLE, 1); 596 597 /* Reprogram control registers */ 598 acpi_leave_sleep_state_prep(acpi_state); 599 600 /* ACPI 3.0 specs (P62) says that it's the responsibility 601 * of the OSPM to clear the status bit [ implying that the 602 * POWER_BUTTON event should not reach userspace ] 603 * 604 * However, we do generate a small hint for userspace in the form of 605 * a wakeup event. We flag this condition for now and generate the 606 * event later, as we're currently too early in resume to be able to 607 * generate wakeup events. 608 */ 609 if (ACPI_SUCCESS(status) && (acpi_state == ACPI_STATE_S3)) { 610 acpi_event_status pwr_btn_status = ACPI_EVENT_FLAG_DISABLED; 611 612 acpi_get_event_status(ACPI_EVENT_POWER_BUTTON, &pwr_btn_status); 613 614 if (pwr_btn_status & ACPI_EVENT_FLAG_STATUS_SET) { 615 acpi_clear_event(ACPI_EVENT_POWER_BUTTON); 616 /* Flag for later */ 617 pwr_btn_event_pending = true; 618 } 619 } 620 621 /* 622 * Disable and clear GPE status before interrupt is enabled. Some GPEs 623 * (like wakeup GPE) haven't handler, this can avoid such GPE misfire. 624 * acpi_leave_sleep_state will reenable specific GPEs later 625 */ 626 acpi_disable_all_gpes(); 627 /* Allow EC transactions to happen. */ 628 acpi_ec_unblock_transactions(); 629 630 suspend_nvs_restore(); 631 632 return ACPI_SUCCESS(status) ? 0 : -EFAULT; 633 } 634 635 static int acpi_suspend_state_valid(suspend_state_t pm_state) 636 { 637 u32 acpi_state; 638 639 switch (pm_state) { 640 case PM_SUSPEND_ON: 641 case PM_SUSPEND_STANDBY: 642 case PM_SUSPEND_MEM: 643 acpi_state = acpi_suspend_states[pm_state]; 644 645 return sleep_states[acpi_state]; 646 default: 647 return 0; 648 } 649 } 650 651 static const struct platform_suspend_ops acpi_suspend_ops = { 652 .valid = acpi_suspend_state_valid, 653 .begin = acpi_suspend_begin, 654 .prepare_late = acpi_pm_prepare, 655 .enter = acpi_suspend_enter, 656 .wake = acpi_pm_finish, 657 .end = acpi_pm_end, 658 }; 659 660 /** 661 * acpi_suspend_begin_old - Set the target system sleep state to the 662 * state associated with given @pm_state, if supported, and 663 * execute the _PTS control method. This function is used if the 664 * pre-ACPI 2.0 suspend ordering has been requested. 665 */ 666 static int acpi_suspend_begin_old(suspend_state_t pm_state) 667 { 668 int error = acpi_suspend_begin(pm_state); 669 if (!error) 670 error = __acpi_pm_prepare(); 671 672 return error; 673 } 674 675 /* 676 * The following callbacks are used if the pre-ACPI 2.0 suspend ordering has 677 * been requested. 678 */ 679 static const struct platform_suspend_ops acpi_suspend_ops_old = { 680 .valid = acpi_suspend_state_valid, 681 .begin = acpi_suspend_begin_old, 682 .prepare_late = acpi_pm_pre_suspend, 683 .enter = acpi_suspend_enter, 684 .wake = acpi_pm_finish, 685 .end = acpi_pm_end, 686 .recover = acpi_pm_finish, 687 }; 688 689 static bool s2idle_wakeup; 690 691 /* 692 * On platforms supporting the Low Power S0 Idle interface there is an ACPI 693 * device object with the PNP0D80 compatible device ID (System Power Management 694 * Controller) and a specific _DSM method under it. That method, if present, 695 * can be used to indicate to the platform that the OS is transitioning into a 696 * low-power state in which certain types of activity are not desirable or that 697 * it is leaving such a state, which allows the platform to adjust its operation 698 * mode accordingly. 699 */ 700 static const struct acpi_device_id lps0_device_ids[] = { 701 {"PNP0D80", }, 702 {"", }, 703 }; 704 705 #define ACPI_LPS0_DSM_UUID "c4eb40a0-6cd2-11e2-bcfd-0800200c9a66" 706 707 #define ACPI_LPS0_GET_DEVICE_CONSTRAINTS 1 708 #define ACPI_LPS0_SCREEN_OFF 3 709 #define ACPI_LPS0_SCREEN_ON 4 710 #define ACPI_LPS0_ENTRY 5 711 #define ACPI_LPS0_EXIT 6 712 713 static acpi_handle lps0_device_handle; 714 static guid_t lps0_dsm_guid; 715 static char lps0_dsm_func_mask; 716 717 /* Device constraint entry structure */ 718 struct lpi_device_info { 719 char *name; 720 int enabled; 721 union acpi_object *package; 722 }; 723 724 /* Constraint package structure */ 725 struct lpi_device_constraint { 726 int uid; 727 int min_dstate; 728 int function_states; 729 }; 730 731 struct lpi_constraints { 732 acpi_handle handle; 733 int min_dstate; 734 }; 735 736 static struct lpi_constraints *lpi_constraints_table; 737 static int lpi_constraints_table_size; 738 739 static void lpi_device_get_constraints(void) 740 { 741 union acpi_object *out_obj; 742 int i; 743 744 out_obj = acpi_evaluate_dsm_typed(lps0_device_handle, &lps0_dsm_guid, 745 1, ACPI_LPS0_GET_DEVICE_CONSTRAINTS, 746 NULL, ACPI_TYPE_PACKAGE); 747 748 acpi_handle_debug(lps0_device_handle, "_DSM function 1 eval %s\n", 749 out_obj ? "successful" : "failed"); 750 751 if (!out_obj) 752 return; 753 754 lpi_constraints_table = kcalloc(out_obj->package.count, 755 sizeof(*lpi_constraints_table), 756 GFP_KERNEL); 757 if (!lpi_constraints_table) 758 goto free_acpi_buffer; 759 760 acpi_handle_debug(lps0_device_handle, "LPI: constraints list begin:\n"); 761 762 for (i = 0; i < out_obj->package.count; i++) { 763 struct lpi_constraints *constraint; 764 acpi_status status; 765 union acpi_object *package = &out_obj->package.elements[i]; 766 struct lpi_device_info info = { }; 767 int package_count = 0, j; 768 769 if (!package) 770 continue; 771 772 for (j = 0; j < package->package.count; ++j) { 773 union acpi_object *element = 774 &(package->package.elements[j]); 775 776 switch (element->type) { 777 case ACPI_TYPE_INTEGER: 778 info.enabled = element->integer.value; 779 break; 780 case ACPI_TYPE_STRING: 781 info.name = element->string.pointer; 782 break; 783 case ACPI_TYPE_PACKAGE: 784 package_count = element->package.count; 785 info.package = element->package.elements; 786 break; 787 } 788 } 789 790 if (!info.enabled || !info.package || !info.name) 791 continue; 792 793 constraint = &lpi_constraints_table[lpi_constraints_table_size]; 794 795 status = acpi_get_handle(NULL, info.name, &constraint->handle); 796 if (ACPI_FAILURE(status)) 797 continue; 798 799 acpi_handle_debug(lps0_device_handle, 800 "index:%d Name:%s\n", i, info.name); 801 802 constraint->min_dstate = -1; 803 804 for (j = 0; j < package_count; ++j) { 805 union acpi_object *info_obj = &info.package[j]; 806 union acpi_object *cnstr_pkg; 807 union acpi_object *obj; 808 struct lpi_device_constraint dev_info; 809 810 switch (info_obj->type) { 811 case ACPI_TYPE_INTEGER: 812 /* version */ 813 break; 814 case ACPI_TYPE_PACKAGE: 815 if (info_obj->package.count < 2) 816 break; 817 818 cnstr_pkg = info_obj->package.elements; 819 obj = &cnstr_pkg[0]; 820 dev_info.uid = obj->integer.value; 821 obj = &cnstr_pkg[1]; 822 dev_info.min_dstate = obj->integer.value; 823 824 acpi_handle_debug(lps0_device_handle, 825 "uid:%d min_dstate:%s\n", 826 dev_info.uid, 827 acpi_power_state_string(dev_info.min_dstate)); 828 829 constraint->min_dstate = dev_info.min_dstate; 830 break; 831 } 832 } 833 834 if (constraint->min_dstate < 0) { 835 acpi_handle_debug(lps0_device_handle, 836 "Incomplete constraint defined\n"); 837 continue; 838 } 839 840 lpi_constraints_table_size++; 841 } 842 843 acpi_handle_debug(lps0_device_handle, "LPI: constraints list end\n"); 844 845 free_acpi_buffer: 846 ACPI_FREE(out_obj); 847 } 848 849 static void lpi_check_constraints(void) 850 { 851 int i; 852 853 for (i = 0; i < lpi_constraints_table_size; ++i) { 854 acpi_handle handle = lpi_constraints_table[i].handle; 855 struct acpi_device *adev; 856 857 if (!handle || acpi_bus_get_device(handle, &adev)) 858 continue; 859 860 acpi_handle_debug(handle, 861 "LPI: required min power state:%s current power state:%s\n", 862 acpi_power_state_string(lpi_constraints_table[i].min_dstate), 863 acpi_power_state_string(adev->power.state)); 864 865 if (!adev->flags.power_manageable) { 866 acpi_handle_info(handle, "LPI: Device not power manageable\n"); 867 lpi_constraints_table[i].handle = NULL; 868 continue; 869 } 870 871 if (adev->power.state < lpi_constraints_table[i].min_dstate) 872 acpi_handle_info(handle, 873 "LPI: Constraint not met; min power state:%s current power state:%s\n", 874 acpi_power_state_string(lpi_constraints_table[i].min_dstate), 875 acpi_power_state_string(adev->power.state)); 876 } 877 } 878 879 static void acpi_sleep_run_lps0_dsm(unsigned int func) 880 { 881 union acpi_object *out_obj; 882 883 if (!(lps0_dsm_func_mask & (1 << func))) 884 return; 885 886 out_obj = acpi_evaluate_dsm(lps0_device_handle, &lps0_dsm_guid, 1, func, NULL); 887 ACPI_FREE(out_obj); 888 889 acpi_handle_debug(lps0_device_handle, "_DSM function %u evaluation %s\n", 890 func, out_obj ? "successful" : "failed"); 891 } 892 893 static int lps0_device_attach(struct acpi_device *adev, 894 const struct acpi_device_id *not_used) 895 { 896 union acpi_object *out_obj; 897 898 if (lps0_device_handle) 899 return 0; 900 901 if (!(acpi_gbl_FADT.flags & ACPI_FADT_LOW_POWER_S0)) 902 return 0; 903 904 guid_parse(ACPI_LPS0_DSM_UUID, &lps0_dsm_guid); 905 /* Check if the _DSM is present and as expected. */ 906 out_obj = acpi_evaluate_dsm(adev->handle, &lps0_dsm_guid, 1, 0, NULL); 907 if (!out_obj || out_obj->type != ACPI_TYPE_BUFFER) { 908 acpi_handle_debug(adev->handle, 909 "_DSM function 0 evaluation failed\n"); 910 return 0; 911 } 912 913 lps0_dsm_func_mask = *(char *)out_obj->buffer.pointer; 914 915 ACPI_FREE(out_obj); 916 917 acpi_handle_debug(adev->handle, "_DSM function mask: 0x%x\n", 918 lps0_dsm_func_mask); 919 920 lps0_device_handle = adev->handle; 921 922 lpi_device_get_constraints(); 923 924 /* 925 * Use suspend-to-idle by default if the default suspend mode was not 926 * set from the command line. 927 */ 928 if (mem_sleep_default > PM_SUSPEND_MEM && !acpi_sleep_default_s3) 929 mem_sleep_current = PM_SUSPEND_TO_IDLE; 930 931 /* 932 * Some LPS0 systems, like ASUS Zenbook UX430UNR/i7-8550U, require the 933 * EC GPE to be enabled while suspended for certain wakeup devices to 934 * work, so mark it as wakeup-capable. 935 */ 936 acpi_ec_mark_gpe_for_wake(); 937 938 return 0; 939 } 940 941 static struct acpi_scan_handler lps0_handler = { 942 .ids = lps0_device_ids, 943 .attach = lps0_device_attach, 944 }; 945 946 static int acpi_s2idle_begin(void) 947 { 948 acpi_scan_lock_acquire(); 949 return 0; 950 } 951 952 static int acpi_s2idle_prepare(void) 953 { 954 if (acpi_sci_irq_valid()) { 955 enable_irq_wake(acpi_sci_irq); 956 acpi_ec_set_gpe_wake_mask(ACPI_GPE_ENABLE); 957 } 958 959 acpi_enable_wakeup_devices(ACPI_STATE_S0); 960 961 /* Change the configuration of GPEs to avoid spurious wakeup. */ 962 acpi_enable_all_wakeup_gpes(); 963 acpi_os_wait_events_complete(); 964 965 s2idle_wakeup = true; 966 return 0; 967 } 968 969 static int acpi_s2idle_prepare_late(void) 970 { 971 if (!lps0_device_handle || sleep_no_lps0) 972 return 0; 973 974 if (pm_debug_messages_on) 975 lpi_check_constraints(); 976 977 acpi_sleep_run_lps0_dsm(ACPI_LPS0_SCREEN_OFF); 978 acpi_sleep_run_lps0_dsm(ACPI_LPS0_ENTRY); 979 980 return 0; 981 } 982 983 static void acpi_s2idle_sync(void) 984 { 985 /* The EC driver uses special workqueues that need to be flushed. */ 986 acpi_ec_flush_work(); 987 acpi_os_wait_events_complete(); /* synchronize Notify handling */ 988 } 989 990 static bool acpi_s2idle_wake(void) 991 { 992 if (!acpi_sci_irq_valid()) 993 return pm_wakeup_pending(); 994 995 while (pm_wakeup_pending()) { 996 /* 997 * If IRQD_WAKEUP_ARMED is set for the SCI at this point, the 998 * SCI has not triggered while suspended, so bail out (the 999 * wakeup is pending anyway and the SCI is not the source of 1000 * it). 1001 */ 1002 if (irqd_is_wakeup_armed(irq_get_irq_data(acpi_sci_irq))) 1003 return true; 1004 1005 /* 1006 * If the status bit of any enabled fixed event is set, the 1007 * wakeup is regarded as valid. 1008 */ 1009 if (acpi_any_fixed_event_status_set()) 1010 return true; 1011 1012 /* Check wakeups from drivers sharing the SCI. */ 1013 if (acpi_check_wakeup_handlers()) 1014 return true; 1015 1016 /* 1017 * If the status bit is set for any enabled GPE other than the 1018 * EC one, the wakeup is regarded as a genuine one. 1019 */ 1020 if (acpi_ec_other_gpes_active()) 1021 return true; 1022 1023 /* 1024 * If the EC GPE status bit has not been set, the wakeup is 1025 * regarded as a spurious one. 1026 */ 1027 if (!acpi_ec_dispatch_gpe()) 1028 return false; 1029 1030 /* 1031 * Cancel the wakeup and process all pending events in case 1032 * there are any wakeup ones in there. 1033 * 1034 * Note that if any non-EC GPEs are active at this point, the 1035 * SCI will retrigger after the rearming below, so no events 1036 * should be missed by canceling the wakeup here. 1037 */ 1038 pm_system_cancel_wakeup(); 1039 1040 acpi_s2idle_sync(); 1041 1042 /* 1043 * The SCI is in the "suspended" state now and it cannot produce 1044 * new wakeup events till the rearming below, so if any of them 1045 * are pending here, they must be resulting from the processing 1046 * of EC events above or coming from somewhere else. 1047 */ 1048 if (pm_wakeup_pending()) 1049 return true; 1050 1051 rearm_wake_irq(acpi_sci_irq); 1052 } 1053 1054 return false; 1055 } 1056 1057 static void acpi_s2idle_restore_early(void) 1058 { 1059 if (!lps0_device_handle || sleep_no_lps0) 1060 return; 1061 1062 acpi_sleep_run_lps0_dsm(ACPI_LPS0_EXIT); 1063 acpi_sleep_run_lps0_dsm(ACPI_LPS0_SCREEN_ON); 1064 } 1065 1066 static void acpi_s2idle_restore(void) 1067 { 1068 /* 1069 * Drain pending events before restoring the working-state configuration 1070 * of GPEs. 1071 */ 1072 acpi_os_wait_events_complete(); /* synchronize GPE processing */ 1073 acpi_s2idle_sync(); 1074 1075 s2idle_wakeup = false; 1076 1077 acpi_enable_all_runtime_gpes(); 1078 1079 acpi_disable_wakeup_devices(ACPI_STATE_S0); 1080 1081 if (acpi_sci_irq_valid()) { 1082 acpi_ec_set_gpe_wake_mask(ACPI_GPE_DISABLE); 1083 disable_irq_wake(acpi_sci_irq); 1084 } 1085 } 1086 1087 static void acpi_s2idle_end(void) 1088 { 1089 acpi_scan_lock_release(); 1090 } 1091 1092 static const struct platform_s2idle_ops acpi_s2idle_ops = { 1093 .begin = acpi_s2idle_begin, 1094 .prepare = acpi_s2idle_prepare, 1095 .prepare_late = acpi_s2idle_prepare_late, 1096 .wake = acpi_s2idle_wake, 1097 .restore_early = acpi_s2idle_restore_early, 1098 .restore = acpi_s2idle_restore, 1099 .end = acpi_s2idle_end, 1100 }; 1101 1102 static void acpi_sleep_suspend_setup(void) 1103 { 1104 int i; 1105 1106 for (i = ACPI_STATE_S1; i < ACPI_STATE_S4; i++) 1107 if (acpi_sleep_state_supported(i)) 1108 sleep_states[i] = 1; 1109 1110 suspend_set_ops(old_suspend_ordering ? 1111 &acpi_suspend_ops_old : &acpi_suspend_ops); 1112 1113 acpi_scan_add_handler(&lps0_handler); 1114 s2idle_set_ops(&acpi_s2idle_ops); 1115 } 1116 1117 #else /* !CONFIG_SUSPEND */ 1118 #define s2idle_wakeup (false) 1119 #define lps0_device_handle (NULL) 1120 static inline void acpi_sleep_suspend_setup(void) {} 1121 #endif /* !CONFIG_SUSPEND */ 1122 1123 bool acpi_s2idle_wakeup(void) 1124 { 1125 return s2idle_wakeup; 1126 } 1127 1128 #ifdef CONFIG_PM_SLEEP 1129 static u32 saved_bm_rld; 1130 1131 static int acpi_save_bm_rld(void) 1132 { 1133 acpi_read_bit_register(ACPI_BITREG_BUS_MASTER_RLD, &saved_bm_rld); 1134 return 0; 1135 } 1136 1137 static void acpi_restore_bm_rld(void) 1138 { 1139 u32 resumed_bm_rld = 0; 1140 1141 acpi_read_bit_register(ACPI_BITREG_BUS_MASTER_RLD, &resumed_bm_rld); 1142 if (resumed_bm_rld == saved_bm_rld) 1143 return; 1144 1145 acpi_write_bit_register(ACPI_BITREG_BUS_MASTER_RLD, saved_bm_rld); 1146 } 1147 1148 static struct syscore_ops acpi_sleep_syscore_ops = { 1149 .suspend = acpi_save_bm_rld, 1150 .resume = acpi_restore_bm_rld, 1151 }; 1152 1153 static void acpi_sleep_syscore_init(void) 1154 { 1155 register_syscore_ops(&acpi_sleep_syscore_ops); 1156 } 1157 #else 1158 static inline void acpi_sleep_syscore_init(void) {} 1159 #endif /* CONFIG_PM_SLEEP */ 1160 1161 #ifdef CONFIG_HIBERNATION 1162 static unsigned long s4_hardware_signature; 1163 static struct acpi_table_facs *facs; 1164 static bool nosigcheck; 1165 1166 void __init acpi_no_s4_hw_signature(void) 1167 { 1168 nosigcheck = true; 1169 } 1170 1171 static int acpi_hibernation_begin(pm_message_t stage) 1172 { 1173 if (!nvs_nosave) { 1174 int error = suspend_nvs_alloc(); 1175 if (error) 1176 return error; 1177 } 1178 1179 if (stage.event == PM_EVENT_HIBERNATE) 1180 pm_set_suspend_via_firmware(); 1181 1182 acpi_pm_start(ACPI_STATE_S4); 1183 return 0; 1184 } 1185 1186 static int acpi_hibernation_enter(void) 1187 { 1188 acpi_status status = AE_OK; 1189 1190 ACPI_FLUSH_CPU_CACHE(); 1191 1192 /* This shouldn't return. If it returns, we have a problem */ 1193 status = acpi_enter_sleep_state(ACPI_STATE_S4); 1194 /* Reprogram control registers */ 1195 acpi_leave_sleep_state_prep(ACPI_STATE_S4); 1196 1197 return ACPI_SUCCESS(status) ? 0 : -EFAULT; 1198 } 1199 1200 static void acpi_hibernation_leave(void) 1201 { 1202 pm_set_resume_via_firmware(); 1203 /* 1204 * If ACPI is not enabled by the BIOS and the boot kernel, we need to 1205 * enable it here. 1206 */ 1207 acpi_enable(); 1208 /* Reprogram control registers */ 1209 acpi_leave_sleep_state_prep(ACPI_STATE_S4); 1210 /* Check the hardware signature */ 1211 if (facs && s4_hardware_signature != facs->hardware_signature) 1212 pr_crit("ACPI: Hardware changed while hibernated, success doubtful!\n"); 1213 /* Restore the NVS memory area */ 1214 suspend_nvs_restore(); 1215 /* Allow EC transactions to happen. */ 1216 acpi_ec_unblock_transactions(); 1217 } 1218 1219 static void acpi_pm_thaw(void) 1220 { 1221 acpi_ec_unblock_transactions(); 1222 acpi_enable_all_runtime_gpes(); 1223 } 1224 1225 static const struct platform_hibernation_ops acpi_hibernation_ops = { 1226 .begin = acpi_hibernation_begin, 1227 .end = acpi_pm_end, 1228 .pre_snapshot = acpi_pm_prepare, 1229 .finish = acpi_pm_finish, 1230 .prepare = acpi_pm_prepare, 1231 .enter = acpi_hibernation_enter, 1232 .leave = acpi_hibernation_leave, 1233 .pre_restore = acpi_pm_freeze, 1234 .restore_cleanup = acpi_pm_thaw, 1235 }; 1236 1237 /** 1238 * acpi_hibernation_begin_old - Set the target system sleep state to 1239 * ACPI_STATE_S4 and execute the _PTS control method. This 1240 * function is used if the pre-ACPI 2.0 suspend ordering has been 1241 * requested. 1242 */ 1243 static int acpi_hibernation_begin_old(pm_message_t stage) 1244 { 1245 int error; 1246 /* 1247 * The _TTS object should always be evaluated before the _PTS object. 1248 * When the old_suspended_ordering is true, the _PTS object is 1249 * evaluated in the acpi_sleep_prepare. 1250 */ 1251 acpi_sleep_tts_switch(ACPI_STATE_S4); 1252 1253 error = acpi_sleep_prepare(ACPI_STATE_S4); 1254 if (error) 1255 return error; 1256 1257 if (!nvs_nosave) { 1258 error = suspend_nvs_alloc(); 1259 if (error) 1260 return error; 1261 } 1262 1263 if (stage.event == PM_EVENT_HIBERNATE) 1264 pm_set_suspend_via_firmware(); 1265 1266 acpi_target_sleep_state = ACPI_STATE_S4; 1267 acpi_scan_lock_acquire(); 1268 return 0; 1269 } 1270 1271 /* 1272 * The following callbacks are used if the pre-ACPI 2.0 suspend ordering has 1273 * been requested. 1274 */ 1275 static const struct platform_hibernation_ops acpi_hibernation_ops_old = { 1276 .begin = acpi_hibernation_begin_old, 1277 .end = acpi_pm_end, 1278 .pre_snapshot = acpi_pm_pre_suspend, 1279 .prepare = acpi_pm_freeze, 1280 .finish = acpi_pm_finish, 1281 .enter = acpi_hibernation_enter, 1282 .leave = acpi_hibernation_leave, 1283 .pre_restore = acpi_pm_freeze, 1284 .restore_cleanup = acpi_pm_thaw, 1285 .recover = acpi_pm_finish, 1286 }; 1287 1288 static void acpi_sleep_hibernate_setup(void) 1289 { 1290 if (!acpi_sleep_state_supported(ACPI_STATE_S4)) 1291 return; 1292 1293 hibernation_set_ops(old_suspend_ordering ? 1294 &acpi_hibernation_ops_old : &acpi_hibernation_ops); 1295 sleep_states[ACPI_STATE_S4] = 1; 1296 if (nosigcheck) 1297 return; 1298 1299 acpi_get_table(ACPI_SIG_FACS, 1, (struct acpi_table_header **)&facs); 1300 if (facs) 1301 s4_hardware_signature = facs->hardware_signature; 1302 } 1303 #else /* !CONFIG_HIBERNATION */ 1304 static inline void acpi_sleep_hibernate_setup(void) {} 1305 #endif /* !CONFIG_HIBERNATION */ 1306 1307 static void acpi_power_off_prepare(void) 1308 { 1309 /* Prepare to power off the system */ 1310 acpi_sleep_prepare(ACPI_STATE_S5); 1311 acpi_disable_all_gpes(); 1312 acpi_os_wait_events_complete(); 1313 } 1314 1315 static void acpi_power_off(void) 1316 { 1317 /* acpi_sleep_prepare(ACPI_STATE_S5) should have already been called */ 1318 printk(KERN_DEBUG "%s called\n", __func__); 1319 local_irq_disable(); 1320 acpi_enter_sleep_state(ACPI_STATE_S5); 1321 } 1322 1323 int __init acpi_sleep_init(void) 1324 { 1325 char supported[ACPI_S_STATE_COUNT * 3 + 1]; 1326 char *pos = supported; 1327 int i; 1328 1329 acpi_sleep_dmi_check(); 1330 1331 sleep_states[ACPI_STATE_S0] = 1; 1332 1333 acpi_sleep_syscore_init(); 1334 acpi_sleep_suspend_setup(); 1335 acpi_sleep_hibernate_setup(); 1336 1337 if (acpi_sleep_state_supported(ACPI_STATE_S5)) { 1338 sleep_states[ACPI_STATE_S5] = 1; 1339 pm_power_off_prepare = acpi_power_off_prepare; 1340 pm_power_off = acpi_power_off; 1341 } else { 1342 acpi_no_s5 = true; 1343 } 1344 1345 supported[0] = 0; 1346 for (i = 0; i < ACPI_S_STATE_COUNT; i++) { 1347 if (sleep_states[i]) 1348 pos += sprintf(pos, " S%d", i); 1349 } 1350 pr_info(PREFIX "(supports%s)\n", supported); 1351 1352 /* 1353 * Register the tts_notifier to reboot notifier list so that the _TTS 1354 * object can also be evaluated when the system enters S5. 1355 */ 1356 register_reboot_notifier(&tts_notifier); 1357 return 0; 1358 } 1359