1 #ifndef _ASM_X86_BOOTPARAM_H 2 #define _ASM_X86_BOOTPARAM_H 3 4 /* setup_data types */ 5 #define SETUP_NONE 0 6 #define SETUP_E820_EXT 1 7 #define SETUP_DTB 2 8 #define SETUP_PCI 3 9 #define SETUP_EFI 4 10 11 /* ram_size flags */ 12 #define RAMDISK_IMAGE_START_MASK 0x07FF 13 #define RAMDISK_PROMPT_FLAG 0x8000 14 #define RAMDISK_LOAD_FLAG 0x4000 15 16 /* loadflags */ 17 #define LOADED_HIGH (1<<0) 18 #define KASLR_FLAG (1<<1) 19 #define QUIET_FLAG (1<<5) 20 #define KEEP_SEGMENTS (1<<6) 21 #define CAN_USE_HEAP (1<<7) 22 23 /* xloadflags */ 24 #define XLF_KERNEL_64 (1<<0) 25 #define XLF_CAN_BE_LOADED_ABOVE_4G (1<<1) 26 #define XLF_EFI_HANDOVER_32 (1<<2) 27 #define XLF_EFI_HANDOVER_64 (1<<3) 28 #define XLF_EFI_KEXEC (1<<4) 29 30 #ifndef __ASSEMBLY__ 31 32 #include <linux/types.h> 33 #include <linux/screen_info.h> 34 #include <linux/apm_bios.h> 35 #include <linux/edd.h> 36 #include <asm/e820.h> 37 #include <asm/ist.h> 38 #include <video/edid.h> 39 40 /* extensible setup data list node */ 41 struct setup_data { 42 __u64 next; 43 __u32 type; 44 __u32 len; 45 __u8 data[0]; 46 }; 47 48 struct setup_header { 49 __u8 setup_sects; 50 __u16 root_flags; 51 __u32 syssize; 52 __u16 ram_size; 53 __u16 vid_mode; 54 __u16 root_dev; 55 __u16 boot_flag; 56 __u16 jump; 57 __u32 header; 58 __u16 version; 59 __u32 realmode_swtch; 60 __u16 start_sys; 61 __u16 kernel_version; 62 __u8 type_of_loader; 63 __u8 loadflags; 64 __u16 setup_move_size; 65 __u32 code32_start; 66 __u32 ramdisk_image; 67 __u32 ramdisk_size; 68 __u32 bootsect_kludge; 69 __u16 heap_end_ptr; 70 __u8 ext_loader_ver; 71 __u8 ext_loader_type; 72 __u32 cmd_line_ptr; 73 __u32 initrd_addr_max; 74 __u32 kernel_alignment; 75 __u8 relocatable_kernel; 76 __u8 min_alignment; 77 __u16 xloadflags; 78 __u32 cmdline_size; 79 __u32 hardware_subarch; 80 __u64 hardware_subarch_data; 81 __u32 payload_offset; 82 __u32 payload_length; 83 __u64 setup_data; 84 __u64 pref_address; 85 __u32 init_size; 86 __u32 handover_offset; 87 } __attribute__((packed)); 88 89 struct sys_desc_table { 90 __u16 length; 91 __u8 table[14]; 92 }; 93 94 /* Gleaned from OFW's set-parameters in cpu/x86/pc/linux.fth */ 95 struct olpc_ofw_header { 96 __u32 ofw_magic; /* OFW signature */ 97 __u32 ofw_version; 98 __u32 cif_handler; /* callback into OFW */ 99 __u32 irq_desc_table; 100 } __attribute__((packed)); 101 102 struct efi_info { 103 __u32 efi_loader_signature; 104 __u32 efi_systab; 105 __u32 efi_memdesc_size; 106 __u32 efi_memdesc_version; 107 __u32 efi_memmap; 108 __u32 efi_memmap_size; 109 __u32 efi_systab_hi; 110 __u32 efi_memmap_hi; 111 }; 112 113 /* The so-called "zeropage" */ 114 struct boot_params { 115 struct screen_info screen_info; /* 0x000 */ 116 struct apm_bios_info apm_bios_info; /* 0x040 */ 117 __u8 _pad2[4]; /* 0x054 */ 118 __u64 tboot_addr; /* 0x058 */ 119 struct ist_info ist_info; /* 0x060 */ 120 __u8 _pad3[16]; /* 0x070 */ 121 __u8 hd0_info[16]; /* obsolete! */ /* 0x080 */ 122 __u8 hd1_info[16]; /* obsolete! */ /* 0x090 */ 123 struct sys_desc_table sys_desc_table; /* obsolete! */ /* 0x0a0 */ 124 struct olpc_ofw_header olpc_ofw_header; /* 0x0b0 */ 125 __u32 ext_ramdisk_image; /* 0x0c0 */ 126 __u32 ext_ramdisk_size; /* 0x0c4 */ 127 __u32 ext_cmd_line_ptr; /* 0x0c8 */ 128 __u8 _pad4[116]; /* 0x0cc */ 129 struct edid_info edid_info; /* 0x140 */ 130 struct efi_info efi_info; /* 0x1c0 */ 131 __u32 alt_mem_k; /* 0x1e0 */ 132 __u32 scratch; /* Scratch field! */ /* 0x1e4 */ 133 __u8 e820_entries; /* 0x1e8 */ 134 __u8 eddbuf_entries; /* 0x1e9 */ 135 __u8 edd_mbr_sig_buf_entries; /* 0x1ea */ 136 __u8 kbd_status; /* 0x1eb */ 137 __u8 _pad5[3]; /* 0x1ec */ 138 /* 139 * The sentinel is set to a nonzero value (0xff) in header.S. 140 * 141 * A bootloader is supposed to only take setup_header and put 142 * it into a clean boot_params buffer. If it turns out that 143 * it is clumsy or too generous with the buffer, it most 144 * probably will pick up the sentinel variable too. The fact 145 * that this variable then is still 0xff will let kernel 146 * know that some variables in boot_params are invalid and 147 * kernel should zero out certain portions of boot_params. 148 */ 149 __u8 sentinel; /* 0x1ef */ 150 __u8 _pad6[1]; /* 0x1f0 */ 151 struct setup_header hdr; /* setup header */ /* 0x1f1 */ 152 __u8 _pad7[0x290-0x1f1-sizeof(struct setup_header)]; 153 __u32 edd_mbr_sig_buffer[EDD_MBR_SIG_MAX]; /* 0x290 */ 154 struct e820entry e820_map[E820MAX]; /* 0x2d0 */ 155 __u8 _pad8[48]; /* 0xcd0 */ 156 struct edd_info eddbuf[EDDMAXNR]; /* 0xd00 */ 157 __u8 _pad9[276]; /* 0xeec */ 158 } __attribute__((packed)); 159 160 /** 161 * enum x86_hardware_subarch - x86 hardware subarchitecture 162 * 163 * The x86 hardware_subarch and hardware_subarch_data were added as of the x86 164 * boot protocol 2.07 to help distinguish and support custom x86 boot 165 * sequences. This enum represents accepted values for the x86 166 * hardware_subarch. Custom x86 boot sequences (not X86_SUBARCH_PC) do not 167 * have or simply *cannot* make use of natural stubs like BIOS or EFI, the 168 * hardware_subarch can be used on the Linux entry path to revector to a 169 * subarchitecture stub when needed. This subarchitecture stub can be used to 170 * set up Linux boot parameters or for special care to account for nonstandard 171 * handling of page tables. 172 * 173 * These enums should only ever be used by x86 code, and the code that uses 174 * it should be well contained and compartamentalized. 175 * 176 * KVM and Xen HVM do not have a subarch as these are expected to follow 177 * standard x86 boot entries. If there is a genuine need for "hypervisor" type 178 * that should be considered separately in the future. Future guest types 179 * should seriously consider working with standard x86 boot stubs such as 180 * the BIOS or EFI boot stubs. 181 * 182 * WARNING: this enum is only used for legacy hacks, for platform features that 183 * are not easily enumerated or discoverable. You should not ever use 184 * this for new features. 185 * 186 * @X86_SUBARCH_PC: Should be used if the hardware is enumerable using standard 187 * PC mechanisms (PCI, ACPI) and doesn't need a special boot flow. 188 * @X86_SUBARCH_LGUEST: Used for x86 hypervisor demo, lguest 189 * @X86_SUBARCH_XEN: Used for Xen guest types which follow the PV boot path, 190 * which start at asm startup_xen() entry point and later jump to the C 191 * xen_start_kernel() entry point. Both domU and dom0 type of guests are 192 * currently supportd through this PV boot path. 193 * @X86_SUBARCH_INTEL_MID: Used for Intel MID (Mobile Internet Device) platform 194 * systems which do not have the PCI legacy interfaces. 195 * @X86_SUBARCH_CE4100: Used for Intel CE media processor (CE4100) SoC for 196 * for settop boxes and media devices, the use of a subarch for CE4100 197 * is more of a hack... 198 */ 199 enum x86_hardware_subarch { 200 X86_SUBARCH_PC = 0, 201 X86_SUBARCH_LGUEST, 202 X86_SUBARCH_XEN, 203 X86_SUBARCH_INTEL_MID, 204 X86_SUBARCH_CE4100, 205 X86_NR_SUBARCHS, 206 }; 207 208 #endif /* __ASSEMBLY__ */ 209 210 #endif /* _ASM_X86_BOOTPARAM_H */ 211