xref: /linux/arch/powerpc/platforms/maple/pci.c (revision a460513ed4b6994bfeb7bd86f72853140bc1ac12)
1 // SPDX-License-Identifier: GPL-2.0-or-later
2 /*
3  * Copyright (C) 2004 Benjamin Herrenschmuidt (benh@kernel.crashing.org),
4  *		      IBM Corp.
5  */
6 
7 #undef DEBUG
8 
9 #include <linux/kernel.h>
10 #include <linux/pci.h>
11 #include <linux/delay.h>
12 #include <linux/string.h>
13 #include <linux/init.h>
14 #include <linux/irq.h>
15 
16 #include <asm/sections.h>
17 #include <asm/io.h>
18 #include <asm/prom.h>
19 #include <asm/pci-bridge.h>
20 #include <asm/machdep.h>
21 #include <asm/iommu.h>
22 #include <asm/ppc-pci.h>
23 #include <asm/isa-bridge.h>
24 
25 #include "maple.h"
26 
27 #ifdef DEBUG
28 #define DBG(x...) printk(x)
29 #else
30 #define DBG(x...)
31 #endif
32 
33 static struct pci_controller *u3_agp, *u3_ht, *u4_pcie;
34 
35 static int __init fixup_one_level_bus_range(struct device_node *node, int higher)
36 {
37 	for (; node != 0;node = node->sibling) {
38 		const int *bus_range;
39 		const unsigned int *class_code;
40 		int len;
41 
42 		/* For PCI<->PCI bridges or CardBus bridges, we go down */
43 		class_code = of_get_property(node, "class-code", NULL);
44 		if (!class_code || ((*class_code >> 8) != PCI_CLASS_BRIDGE_PCI &&
45 			(*class_code >> 8) != PCI_CLASS_BRIDGE_CARDBUS))
46 			continue;
47 		bus_range = of_get_property(node, "bus-range", &len);
48 		if (bus_range != NULL && len > 2 * sizeof(int)) {
49 			if (bus_range[1] > higher)
50 				higher = bus_range[1];
51 		}
52 		higher = fixup_one_level_bus_range(node->child, higher);
53 	}
54 	return higher;
55 }
56 
57 /* This routine fixes the "bus-range" property of all bridges in the
58  * system since they tend to have their "last" member wrong on macs
59  *
60  * Note that the bus numbers manipulated here are OF bus numbers, they
61  * are not Linux bus numbers.
62  */
63 static void __init fixup_bus_range(struct device_node *bridge)
64 {
65 	int *bus_range;
66 	struct property *prop;
67 	int len;
68 
69 	/* Lookup the "bus-range" property for the hose */
70 	prop = of_find_property(bridge, "bus-range", &len);
71 	if (prop == NULL  || prop->value == NULL || len < 2 * sizeof(int)) {
72 		printk(KERN_WARNING "Can't get bus-range for %pOF\n",
73 			       bridge);
74 		return;
75 	}
76 	bus_range = prop->value;
77 	bus_range[1] = fixup_one_level_bus_range(bridge->child, bus_range[1]);
78 }
79 
80 
81 static unsigned long u3_agp_cfa0(u8 devfn, u8 off)
82 {
83 	return (1 << (unsigned long)PCI_SLOT(devfn)) |
84 		((unsigned long)PCI_FUNC(devfn) << 8) |
85 		((unsigned long)off & 0xFCUL);
86 }
87 
88 static unsigned long u3_agp_cfa1(u8 bus, u8 devfn, u8 off)
89 {
90 	return ((unsigned long)bus << 16) |
91 		((unsigned long)devfn << 8) |
92 		((unsigned long)off & 0xFCUL) |
93 		1UL;
94 }
95 
96 static volatile void __iomem *u3_agp_cfg_access(struct pci_controller* hose,
97 				       u8 bus, u8 dev_fn, u8 offset)
98 {
99 	unsigned int caddr;
100 
101 	if (bus == hose->first_busno) {
102 		if (dev_fn < (11 << 3))
103 			return NULL;
104 		caddr = u3_agp_cfa0(dev_fn, offset);
105 	} else
106 		caddr = u3_agp_cfa1(bus, dev_fn, offset);
107 
108 	/* Uninorth will return garbage if we don't read back the value ! */
109 	do {
110 		out_le32(hose->cfg_addr, caddr);
111 	} while (in_le32(hose->cfg_addr) != caddr);
112 
113 	offset &= 0x07;
114 	return hose->cfg_data + offset;
115 }
116 
117 static int u3_agp_read_config(struct pci_bus *bus, unsigned int devfn,
118 			      int offset, int len, u32 *val)
119 {
120 	struct pci_controller *hose;
121 	volatile void __iomem *addr;
122 
123 	hose = pci_bus_to_host(bus);
124 	if (hose == NULL)
125 		return PCIBIOS_DEVICE_NOT_FOUND;
126 
127 	addr = u3_agp_cfg_access(hose, bus->number, devfn, offset);
128 	if (!addr)
129 		return PCIBIOS_DEVICE_NOT_FOUND;
130 	/*
131 	 * Note: the caller has already checked that offset is
132 	 * suitably aligned and that len is 1, 2 or 4.
133 	 */
134 	switch (len) {
135 	case 1:
136 		*val = in_8(addr);
137 		break;
138 	case 2:
139 		*val = in_le16(addr);
140 		break;
141 	default:
142 		*val = in_le32(addr);
143 		break;
144 	}
145 	return PCIBIOS_SUCCESSFUL;
146 }
147 
148 static int u3_agp_write_config(struct pci_bus *bus, unsigned int devfn,
149 			       int offset, int len, u32 val)
150 {
151 	struct pci_controller *hose;
152 	volatile void __iomem *addr;
153 
154 	hose = pci_bus_to_host(bus);
155 	if (hose == NULL)
156 		return PCIBIOS_DEVICE_NOT_FOUND;
157 
158 	addr = u3_agp_cfg_access(hose, bus->number, devfn, offset);
159 	if (!addr)
160 		return PCIBIOS_DEVICE_NOT_FOUND;
161 	/*
162 	 * Note: the caller has already checked that offset is
163 	 * suitably aligned and that len is 1, 2 or 4.
164 	 */
165 	switch (len) {
166 	case 1:
167 		out_8(addr, val);
168 		break;
169 	case 2:
170 		out_le16(addr, val);
171 		break;
172 	default:
173 		out_le32(addr, val);
174 		break;
175 	}
176 	return PCIBIOS_SUCCESSFUL;
177 }
178 
179 static struct pci_ops u3_agp_pci_ops =
180 {
181 	.read = u3_agp_read_config,
182 	.write = u3_agp_write_config,
183 };
184 
185 static unsigned long u3_ht_cfa0(u8 devfn, u8 off)
186 {
187 	return (devfn << 8) | off;
188 }
189 
190 static unsigned long u3_ht_cfa1(u8 bus, u8 devfn, u8 off)
191 {
192 	return u3_ht_cfa0(devfn, off) + (bus << 16) + 0x01000000UL;
193 }
194 
195 static volatile void __iomem *u3_ht_cfg_access(struct pci_controller* hose,
196 				      u8 bus, u8 devfn, u8 offset)
197 {
198 	if (bus == hose->first_busno) {
199 		if (PCI_SLOT(devfn) == 0)
200 			return NULL;
201 		return hose->cfg_data + u3_ht_cfa0(devfn, offset);
202 	} else
203 		return hose->cfg_data + u3_ht_cfa1(bus, devfn, offset);
204 }
205 
206 static int u3_ht_root_read_config(struct pci_controller *hose, u8 offset,
207 				  int len, u32 *val)
208 {
209 	volatile void __iomem *addr;
210 
211 	addr = hose->cfg_addr;
212 	addr += ((offset & ~3) << 2) + (4 - len - (offset & 3));
213 
214 	switch (len) {
215 	case 1:
216 		*val = in_8(addr);
217 		break;
218 	case 2:
219 		*val = in_be16(addr);
220 		break;
221 	default:
222 		*val = in_be32(addr);
223 		break;
224 	}
225 
226 	return PCIBIOS_SUCCESSFUL;
227 }
228 
229 static int u3_ht_root_write_config(struct pci_controller *hose, u8 offset,
230 				  int len, u32 val)
231 {
232 	volatile void __iomem *addr;
233 
234 	addr = hose->cfg_addr + ((offset & ~3) << 2) + (4 - len - (offset & 3));
235 
236 	if (offset >= PCI_BASE_ADDRESS_0 && offset < PCI_CAPABILITY_LIST)
237 		return PCIBIOS_SUCCESSFUL;
238 
239 	switch (len) {
240 	case 1:
241 		out_8(addr, val);
242 		break;
243 	case 2:
244 		out_be16(addr, val);
245 		break;
246 	default:
247 		out_be32(addr, val);
248 		break;
249 	}
250 
251 	return PCIBIOS_SUCCESSFUL;
252 }
253 
254 static int u3_ht_read_config(struct pci_bus *bus, unsigned int devfn,
255 			     int offset, int len, u32 *val)
256 {
257 	struct pci_controller *hose;
258 	volatile void __iomem *addr;
259 
260 	hose = pci_bus_to_host(bus);
261 	if (hose == NULL)
262 		return PCIBIOS_DEVICE_NOT_FOUND;
263 
264 	if (bus->number == hose->first_busno && devfn == PCI_DEVFN(0, 0))
265 		return u3_ht_root_read_config(hose, offset, len, val);
266 
267 	if (offset > 0xff)
268 		return PCIBIOS_BAD_REGISTER_NUMBER;
269 
270 	addr = u3_ht_cfg_access(hose, bus->number, devfn, offset);
271 	if (!addr)
272 		return PCIBIOS_DEVICE_NOT_FOUND;
273 
274 	/*
275 	 * Note: the caller has already checked that offset is
276 	 * suitably aligned and that len is 1, 2 or 4.
277 	 */
278 	switch (len) {
279 	case 1:
280 		*val = in_8(addr);
281 		break;
282 	case 2:
283 		*val = in_le16(addr);
284 		break;
285 	default:
286 		*val = in_le32(addr);
287 		break;
288 	}
289 	return PCIBIOS_SUCCESSFUL;
290 }
291 
292 static int u3_ht_write_config(struct pci_bus *bus, unsigned int devfn,
293 			      int offset, int len, u32 val)
294 {
295 	struct pci_controller *hose;
296 	volatile void __iomem *addr;
297 
298 	hose = pci_bus_to_host(bus);
299 	if (hose == NULL)
300 		return PCIBIOS_DEVICE_NOT_FOUND;
301 
302 	if (bus->number == hose->first_busno && devfn == PCI_DEVFN(0, 0))
303 		return u3_ht_root_write_config(hose, offset, len, val);
304 
305 	if (offset > 0xff)
306 		return PCIBIOS_BAD_REGISTER_NUMBER;
307 
308 	addr = u3_ht_cfg_access(hose, bus->number, devfn, offset);
309 	if (!addr)
310 		return PCIBIOS_DEVICE_NOT_FOUND;
311 	/*
312 	 * Note: the caller has already checked that offset is
313 	 * suitably aligned and that len is 1, 2 or 4.
314 	 */
315 	switch (len) {
316 	case 1:
317 		out_8(addr, val);
318 		break;
319 	case 2:
320 		out_le16(addr, val);
321 		break;
322 	default:
323 		out_le32(addr, val);
324 		break;
325 	}
326 	return PCIBIOS_SUCCESSFUL;
327 }
328 
329 static struct pci_ops u3_ht_pci_ops =
330 {
331 	.read = u3_ht_read_config,
332 	.write = u3_ht_write_config,
333 };
334 
335 static unsigned int u4_pcie_cfa0(unsigned int devfn, unsigned int off)
336 {
337 	return (1 << PCI_SLOT(devfn))	|
338 	       (PCI_FUNC(devfn) << 8)	|
339 	       ((off >> 8) << 28) 	|
340 	       (off & 0xfcu);
341 }
342 
343 static unsigned int u4_pcie_cfa1(unsigned int bus, unsigned int devfn,
344 				 unsigned int off)
345 {
346         return (bus << 16)		|
347 	       (devfn << 8)		|
348 	       ((off >> 8) << 28)	|
349 	       (off & 0xfcu)		| 1u;
350 }
351 
352 static volatile void __iomem *u4_pcie_cfg_access(struct pci_controller* hose,
353                                         u8 bus, u8 dev_fn, int offset)
354 {
355         unsigned int caddr;
356 
357         if (bus == hose->first_busno)
358                 caddr = u4_pcie_cfa0(dev_fn, offset);
359         else
360                 caddr = u4_pcie_cfa1(bus, dev_fn, offset);
361 
362         /* Uninorth will return garbage if we don't read back the value ! */
363         do {
364                 out_le32(hose->cfg_addr, caddr);
365         } while (in_le32(hose->cfg_addr) != caddr);
366 
367         offset &= 0x03;
368         return hose->cfg_data + offset;
369 }
370 
371 static int u4_pcie_read_config(struct pci_bus *bus, unsigned int devfn,
372                                int offset, int len, u32 *val)
373 {
374         struct pci_controller *hose;
375         volatile void __iomem *addr;
376 
377         hose = pci_bus_to_host(bus);
378         if (hose == NULL)
379                 return PCIBIOS_DEVICE_NOT_FOUND;
380         if (offset >= 0x1000)
381                 return  PCIBIOS_BAD_REGISTER_NUMBER;
382         addr = u4_pcie_cfg_access(hose, bus->number, devfn, offset);
383         if (!addr)
384                 return PCIBIOS_DEVICE_NOT_FOUND;
385         /*
386          * Note: the caller has already checked that offset is
387          * suitably aligned and that len is 1, 2 or 4.
388          */
389         switch (len) {
390         case 1:
391                 *val = in_8(addr);
392                 break;
393         case 2:
394                 *val = in_le16(addr);
395                 break;
396         default:
397                 *val = in_le32(addr);
398                 break;
399         }
400         return PCIBIOS_SUCCESSFUL;
401 }
402 static int u4_pcie_write_config(struct pci_bus *bus, unsigned int devfn,
403                                 int offset, int len, u32 val)
404 {
405         struct pci_controller *hose;
406         volatile void __iomem *addr;
407 
408         hose = pci_bus_to_host(bus);
409         if (hose == NULL)
410                 return PCIBIOS_DEVICE_NOT_FOUND;
411         if (offset >= 0x1000)
412                 return  PCIBIOS_BAD_REGISTER_NUMBER;
413         addr = u4_pcie_cfg_access(hose, bus->number, devfn, offset);
414         if (!addr)
415                 return PCIBIOS_DEVICE_NOT_FOUND;
416         /*
417          * Note: the caller has already checked that offset is
418          * suitably aligned and that len is 1, 2 or 4.
419          */
420         switch (len) {
421         case 1:
422                 out_8(addr, val);
423                 break;
424         case 2:
425                 out_le16(addr, val);
426                 break;
427         default:
428                 out_le32(addr, val);
429                 break;
430         }
431         return PCIBIOS_SUCCESSFUL;
432 }
433 
434 static struct pci_ops u4_pcie_pci_ops =
435 {
436 	.read = u4_pcie_read_config,
437 	.write = u4_pcie_write_config,
438 };
439 
440 static void __init setup_u3_agp(struct pci_controller* hose)
441 {
442 	/* On G5, we move AGP up to high bus number so we don't need
443 	 * to reassign bus numbers for HT. If we ever have P2P bridges
444 	 * on AGP, we'll have to move pci_assign_all_buses to the
445 	 * pci_controller structure so we enable it for AGP and not for
446 	 * HT childs.
447 	 * We hard code the address because of the different size of
448 	 * the reg address cell, we shall fix that by killing struct
449 	 * reg_property and using some accessor functions instead
450 	 */
451 	hose->first_busno = 0xf0;
452 	hose->last_busno = 0xff;
453 	hose->ops = &u3_agp_pci_ops;
454 	hose->cfg_addr = ioremap(0xf0000000 + 0x800000, 0x1000);
455 	hose->cfg_data = ioremap(0xf0000000 + 0xc00000, 0x1000);
456 
457 	u3_agp = hose;
458 }
459 
460 static void __init setup_u4_pcie(struct pci_controller* hose)
461 {
462         /* We currently only implement the "non-atomic" config space, to
463          * be optimised later.
464          */
465         hose->ops = &u4_pcie_pci_ops;
466         hose->cfg_addr = ioremap(0xf0000000 + 0x800000, 0x1000);
467         hose->cfg_data = ioremap(0xf0000000 + 0xc00000, 0x1000);
468 
469         u4_pcie = hose;
470 }
471 
472 static void __init setup_u3_ht(struct pci_controller* hose)
473 {
474 	hose->ops = &u3_ht_pci_ops;
475 
476 	/* We hard code the address because of the different size of
477 	 * the reg address cell, we shall fix that by killing struct
478 	 * reg_property and using some accessor functions instead
479 	 */
480 	hose->cfg_data = ioremap(0xf2000000, 0x02000000);
481 	hose->cfg_addr = ioremap(0xf8070000, 0x1000);
482 
483 	hose->first_busno = 0;
484 	hose->last_busno = 0xef;
485 
486 	u3_ht = hose;
487 }
488 
489 static int __init maple_add_bridge(struct device_node *dev)
490 {
491 	int len;
492 	struct pci_controller *hose;
493 	char* disp_name;
494 	const int *bus_range;
495 	int primary = 1;
496 
497 	DBG("Adding PCI host bridge %pOF\n", dev);
498 
499 	bus_range = of_get_property(dev, "bus-range", &len);
500 	if (bus_range == NULL || len < 2 * sizeof(int)) {
501 		printk(KERN_WARNING "Can't get bus-range for %pOF, assume bus 0\n",
502 		dev);
503 	}
504 
505 	hose = pcibios_alloc_controller(dev);
506 	if (hose == NULL)
507 		return -ENOMEM;
508 	hose->first_busno = bus_range ? bus_range[0] : 0;
509 	hose->last_busno = bus_range ? bus_range[1] : 0xff;
510 	hose->controller_ops = maple_pci_controller_ops;
511 
512 	disp_name = NULL;
513 	if (of_device_is_compatible(dev, "u3-agp")) {
514 		setup_u3_agp(hose);
515 		disp_name = "U3-AGP";
516 		primary = 0;
517 	} else if (of_device_is_compatible(dev, "u3-ht")) {
518 		setup_u3_ht(hose);
519 		disp_name = "U3-HT";
520 		primary = 1;
521         } else if (of_device_is_compatible(dev, "u4-pcie")) {
522                 setup_u4_pcie(hose);
523                 disp_name = "U4-PCIE";
524                 primary = 0;
525 	}
526 	printk(KERN_INFO "Found %s PCI host bridge. Firmware bus number: %d->%d\n",
527 		disp_name, hose->first_busno, hose->last_busno);
528 
529 	/* Interpret the "ranges" property */
530 	/* This also maps the I/O region and sets isa_io/mem_base */
531 	pci_process_bridge_OF_ranges(hose, dev, primary);
532 
533 	/* Fixup "bus-range" OF property */
534 	fixup_bus_range(dev);
535 
536 	/* Check for legacy IOs */
537 	isa_bridge_find_early(hose);
538 
539 	/* create pci_dn's for DT nodes under this PHB */
540 	pci_devs_phb_init_dynamic(hose);
541 
542 	return 0;
543 }
544 
545 
546 void maple_pci_irq_fixup(struct pci_dev *dev)
547 {
548 	DBG(" -> maple_pci_irq_fixup\n");
549 
550 	/* Fixup IRQ for PCIe host */
551 	if (u4_pcie != NULL && dev->bus->number == 0 &&
552 	    pci_bus_to_host(dev->bus) == u4_pcie) {
553 		printk(KERN_DEBUG "Fixup U4 PCIe IRQ\n");
554 		dev->irq = irq_create_mapping(NULL, 1);
555 		if (dev->irq)
556 			irq_set_irq_type(dev->irq, IRQ_TYPE_LEVEL_LOW);
557 	}
558 
559 	/* Hide AMD8111 IDE interrupt when in legacy mode so
560 	 * the driver calls pci_get_legacy_ide_irq()
561 	 */
562 	if (dev->vendor == PCI_VENDOR_ID_AMD &&
563 	    dev->device == PCI_DEVICE_ID_AMD_8111_IDE &&
564 	    (dev->class & 5) != 5) {
565 		dev->irq = 0;
566 	}
567 
568 	DBG(" <- maple_pci_irq_fixup\n");
569 }
570 
571 static int maple_pci_root_bridge_prepare(struct pci_host_bridge *bridge)
572 {
573 	struct pci_controller *hose = pci_bus_to_host(bridge->bus);
574 	struct device_node *np, *child;
575 
576 	if (hose != u3_agp)
577 		return 0;
578 
579 	/* Fixup the PCI<->OF mapping for U3 AGP due to bus renumbering. We
580 	 * assume there is no P2P bridge on the AGP bus, which should be a
581 	 * safe assumptions hopefully.
582 	 */
583 	np = hose->dn;
584 	PCI_DN(np)->busno = 0xf0;
585 	for_each_child_of_node(np, child)
586 		PCI_DN(child)->busno = 0xf0;
587 
588 	return 0;
589 }
590 
591 void __init maple_pci_init(void)
592 {
593 	struct device_node *np, *root;
594 	struct device_node *ht = NULL;
595 
596 	/* Probe root PCI hosts, that is on U3 the AGP host and the
597 	 * HyperTransport host. That one is actually "kept" around
598 	 * and actually added last as it's resource management relies
599 	 * on the AGP resources to have been setup first
600 	 */
601 	root = of_find_node_by_path("/");
602 	if (root == NULL) {
603 		printk(KERN_CRIT "maple_find_bridges: can't find root of device tree\n");
604 		return;
605 	}
606 	for_each_child_of_node(root, np) {
607 		if (!of_node_is_type(np, "pci") && !of_node_is_type(np, "ht"))
608 			continue;
609 		if ((of_device_is_compatible(np, "u4-pcie") ||
610 		     of_device_is_compatible(np, "u3-agp")) &&
611 		    maple_add_bridge(np) == 0)
612 			of_node_get(np);
613 
614 		if (of_device_is_compatible(np, "u3-ht")) {
615 			of_node_get(np);
616 			ht = np;
617 		}
618 	}
619 	of_node_put(root);
620 
621 	/* Now setup the HyperTransport host if we found any
622 	 */
623 	if (ht && maple_add_bridge(ht) != 0)
624 		of_node_put(ht);
625 
626 	ppc_md.pcibios_root_bridge_prepare = maple_pci_root_bridge_prepare;
627 
628 	/* Tell pci.c to not change any resource allocations.  */
629 	pci_add_flags(PCI_PROBE_ONLY);
630 }
631 
632 int maple_pci_get_legacy_ide_irq(struct pci_dev *pdev, int channel)
633 {
634 	struct device_node *np;
635 	unsigned int defirq = channel ? 15 : 14;
636 	unsigned int irq;
637 
638 	if (pdev->vendor != PCI_VENDOR_ID_AMD ||
639 	    pdev->device != PCI_DEVICE_ID_AMD_8111_IDE)
640 		return defirq;
641 
642 	np = pci_device_to_OF_node(pdev);
643 	if (np == NULL) {
644 		printk("Failed to locate OF node for IDE %s\n",
645 		       pci_name(pdev));
646 		return defirq;
647 	}
648 	irq = irq_of_parse_and_map(np, channel & 0x1);
649 	if (!irq) {
650 		printk("Failed to map onboard IDE interrupt for channel %d\n",
651 		       channel);
652 		return defirq;
653 	}
654 	return irq;
655 }
656 
657 static void quirk_ipr_msi(struct pci_dev *dev)
658 {
659 	/* Something prevents MSIs from the IPR from working on Bimini,
660 	 * and the driver has no smarts to recover. So disable MSI
661 	 * on it for now. */
662 
663 	if (machine_is(maple)) {
664 		dev->no_msi = 1;
665 		dev_info(&dev->dev, "Quirk disabled MSI\n");
666 	}
667 }
668 DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_OBSIDIAN,
669 			quirk_ipr_msi);
670 
671 struct pci_controller_ops maple_pci_controller_ops = {
672 };
673