1 /* SPDX-License-Identifier: GPL-2.0 */ 2 #ifndef _ASM_POWERPC_HVCALL_H 3 #define _ASM_POWERPC_HVCALL_H 4 #ifdef __KERNEL__ 5 6 #define HVSC .long 0x44000022 7 8 #define H_SUCCESS 0 9 #define H_BUSY 1 /* Hardware busy -- retry later */ 10 #define H_CLOSED 2 /* Resource closed */ 11 #define H_NOT_AVAILABLE 3 12 #define H_CONSTRAINED 4 /* Resource request constrained to max allowed */ 13 #define H_PARTIAL 5 14 #define H_IN_PROGRESS 14 /* Kind of like busy */ 15 #define H_PAGE_REGISTERED 15 16 #define H_PARTIAL_STORE 16 17 #define H_PENDING 17 /* returned from H_POLL_PENDING */ 18 #define H_CONTINUE 18 /* Returned from H_Join on success */ 19 #define H_LONG_BUSY_START_RANGE 9900 /* Start of long busy range */ 20 #define H_LONG_BUSY_ORDER_1_MSEC 9900 /* Long busy, hint that 1msec \ 21 is a good time to retry */ 22 #define H_LONG_BUSY_ORDER_10_MSEC 9901 /* Long busy, hint that 10msec \ 23 is a good time to retry */ 24 #define H_LONG_BUSY_ORDER_100_MSEC 9902 /* Long busy, hint that 100msec \ 25 is a good time to retry */ 26 #define H_LONG_BUSY_ORDER_1_SEC 9903 /* Long busy, hint that 1sec \ 27 is a good time to retry */ 28 #define H_LONG_BUSY_ORDER_10_SEC 9904 /* Long busy, hint that 10sec \ 29 is a good time to retry */ 30 #define H_LONG_BUSY_ORDER_100_SEC 9905 /* Long busy, hint that 100sec \ 31 is a good time to retry */ 32 #define H_LONG_BUSY_END_RANGE 9905 /* End of long busy range */ 33 34 /* Internal value used in book3s_hv kvm support; not returned to guests */ 35 #define H_TOO_HARD 9999 36 37 #define H_HARDWARE -1 /* Hardware error */ 38 #define H_FUNCTION -2 /* Function not supported */ 39 #define H_PRIVILEGE -3 /* Caller not privileged */ 40 #define H_PARAMETER -4 /* Parameter invalid, out-of-range or conflicting */ 41 #define H_BAD_MODE -5 /* Illegal msr value */ 42 #define H_PTEG_FULL -6 /* PTEG is full */ 43 #define H_NOT_FOUND -7 /* PTE was not found" */ 44 #define H_RESERVED_DABR -8 /* DABR address is reserved by the hypervisor on this processor" */ 45 #define H_NO_MEM -9 46 #define H_AUTHORITY -10 47 #define H_PERMISSION -11 48 #define H_DROPPED -12 49 #define H_SOURCE_PARM -13 50 #define H_DEST_PARM -14 51 #define H_REMOTE_PARM -15 52 #define H_RESOURCE -16 53 #define H_ADAPTER_PARM -17 54 #define H_RH_PARM -18 55 #define H_RCQ_PARM -19 56 #define H_SCQ_PARM -20 57 #define H_EQ_PARM -21 58 #define H_RT_PARM -22 59 #define H_ST_PARM -23 60 #define H_SIGT_PARM -24 61 #define H_TOKEN_PARM -25 62 #define H_MLENGTH_PARM -27 63 #define H_MEM_PARM -28 64 #define H_MEM_ACCESS_PARM -29 65 #define H_ATTR_PARM -30 66 #define H_PORT_PARM -31 67 #define H_MCG_PARM -32 68 #define H_VL_PARM -33 69 #define H_TSIZE_PARM -34 70 #define H_TRACE_PARM -35 71 72 #define H_MASK_PARM -37 73 #define H_MCG_FULL -38 74 #define H_ALIAS_EXIST -39 75 #define H_P_COUNTER -40 76 #define H_TABLE_FULL -41 77 #define H_ALT_TABLE -42 78 #define H_MR_CONDITION -43 79 #define H_NOT_ENOUGH_RESOURCES -44 80 #define H_R_STATE -45 81 #define H_RESCINDED -46 82 #define H_P2 -55 83 #define H_P3 -56 84 #define H_P4 -57 85 #define H_P5 -58 86 #define H_P6 -59 87 #define H_P7 -60 88 #define H_P8 -61 89 #define H_P9 -62 90 #define H_TOO_BIG -64 91 #define H_OVERLAP -68 92 #define H_INTERRUPT -69 93 #define H_BAD_DATA -70 94 #define H_NOT_ACTIVE -71 95 #define H_SG_LIST -72 96 #define H_OP_MODE -73 97 #define H_COP_HW -74 98 #define H_STATE -75 99 #define H_UNSUPPORTED_FLAG_START -256 100 #define H_UNSUPPORTED_FLAG_END -511 101 #define H_MULTI_THREADS_ACTIVE -9005 102 #define H_OUTSTANDING_COP_OPS -9006 103 104 105 /* Long Busy is a condition that can be returned by the firmware 106 * when a call cannot be completed now, but the identical call 107 * should be retried later. This prevents calls blocking in the 108 * firmware for long periods of time. Annoyingly the firmware can return 109 * a range of return codes, hinting at how long we should wait before 110 * retrying. If you don't care for the hint, the macro below is a good 111 * way to check for the long_busy return codes 112 */ 113 #define H_IS_LONG_BUSY(x) ((x >= H_LONG_BUSY_START_RANGE) \ 114 && (x <= H_LONG_BUSY_END_RANGE)) 115 116 /* Flags */ 117 #define H_LARGE_PAGE (1UL<<(63-16)) 118 #define H_EXACT (1UL<<(63-24)) /* Use exact PTE or return H_PTEG_FULL */ 119 #define H_R_XLATE (1UL<<(63-25)) /* include a valid logical page num in the pte if the valid bit is set */ 120 #define H_READ_4 (1UL<<(63-26)) /* Return 4 PTEs */ 121 #define H_PAGE_STATE_CHANGE (1UL<<(63-28)) 122 #define H_PAGE_UNUSED ((1UL<<(63-29)) | (1UL<<(63-30))) 123 #define H_PAGE_SET_UNUSED (H_PAGE_STATE_CHANGE | H_PAGE_UNUSED) 124 #define H_PAGE_SET_LOANED (H_PAGE_SET_UNUSED | (1UL<<(63-31))) 125 #define H_PAGE_SET_ACTIVE H_PAGE_STATE_CHANGE 126 #define H_AVPN (1UL<<(63-32)) /* An avpn is provided as a sanity test */ 127 #define H_ANDCOND (1UL<<(63-33)) 128 #define H_LOCAL (1UL<<(63-35)) 129 #define H_ICACHE_INVALIDATE (1UL<<(63-40)) /* icbi, etc. (ignored for IO pages) */ 130 #define H_ICACHE_SYNCHRONIZE (1UL<<(63-41)) /* dcbst, icbi, etc (ignored for IO pages */ 131 #define H_COALESCE_CAND (1UL<<(63-42)) /* page is a good candidate for coalescing */ 132 #define H_ZERO_PAGE (1UL<<(63-48)) /* zero the page before mapping (ignored for IO pages) */ 133 #define H_COPY_PAGE (1UL<<(63-49)) 134 #define H_N (1UL<<(63-61)) 135 #define H_PP1 (1UL<<(63-62)) 136 #define H_PP2 (1UL<<(63-63)) 137 138 /* Flags for H_REGISTER_VPA subfunction field */ 139 #define H_VPA_FUNC_SHIFT (63-18) /* Bit posn of subfunction code */ 140 #define H_VPA_FUNC_MASK 7UL 141 #define H_VPA_REG_VPA 1UL /* Register Virtual Processor Area */ 142 #define H_VPA_REG_DTL 2UL /* Register Dispatch Trace Log */ 143 #define H_VPA_REG_SLB 3UL /* Register SLB shadow buffer */ 144 #define H_VPA_DEREG_VPA 5UL /* Deregister Virtual Processor Area */ 145 #define H_VPA_DEREG_DTL 6UL /* Deregister Dispatch Trace Log */ 146 #define H_VPA_DEREG_SLB 7UL /* Deregister SLB shadow buffer */ 147 148 /* VASI States */ 149 #define H_VASI_INVALID 0 150 #define H_VASI_ENABLED 1 151 #define H_VASI_ABORTED 2 152 #define H_VASI_SUSPENDING 3 153 #define H_VASI_SUSPENDED 4 154 #define H_VASI_RESUMED 5 155 #define H_VASI_COMPLETED 6 156 157 /* Each control block has to be on a 4K boundary */ 158 #define H_CB_ALIGNMENT 4096 159 160 /* pSeries hypervisor opcodes */ 161 #define H_REMOVE 0x04 162 #define H_ENTER 0x08 163 #define H_READ 0x0c 164 #define H_CLEAR_MOD 0x10 165 #define H_CLEAR_REF 0x14 166 #define H_PROTECT 0x18 167 #define H_GET_TCE 0x1c 168 #define H_PUT_TCE 0x20 169 #define H_SET_SPRG0 0x24 170 #define H_SET_DABR 0x28 171 #define H_PAGE_INIT 0x2c 172 #define H_SET_ASR 0x30 173 #define H_ASR_ON 0x34 174 #define H_ASR_OFF 0x38 175 #define H_LOGICAL_CI_LOAD 0x3c 176 #define H_LOGICAL_CI_STORE 0x40 177 #define H_LOGICAL_CACHE_LOAD 0x44 178 #define H_LOGICAL_CACHE_STORE 0x48 179 #define H_LOGICAL_ICBI 0x4c 180 #define H_LOGICAL_DCBF 0x50 181 #define H_GET_TERM_CHAR 0x54 182 #define H_PUT_TERM_CHAR 0x58 183 #define H_REAL_TO_LOGICAL 0x5c 184 #define H_HYPERVISOR_DATA 0x60 185 #define H_EOI 0x64 186 #define H_CPPR 0x68 187 #define H_IPI 0x6c 188 #define H_IPOLL 0x70 189 #define H_XIRR 0x74 190 #define H_PERFMON 0x7c 191 #define H_MIGRATE_DMA 0x78 192 #define H_REGISTER_VPA 0xDC 193 #define H_CEDE 0xE0 194 #define H_CONFER 0xE4 195 #define H_PROD 0xE8 196 #define H_GET_PPP 0xEC 197 #define H_SET_PPP 0xF0 198 #define H_PURR 0xF4 199 #define H_PIC 0xF8 200 #define H_REG_CRQ 0xFC 201 #define H_FREE_CRQ 0x100 202 #define H_VIO_SIGNAL 0x104 203 #define H_SEND_CRQ 0x108 204 #define H_COPY_RDMA 0x110 205 #define H_REGISTER_LOGICAL_LAN 0x114 206 #define H_FREE_LOGICAL_LAN 0x118 207 #define H_ADD_LOGICAL_LAN_BUFFER 0x11C 208 #define H_SEND_LOGICAL_LAN 0x120 209 #define H_BULK_REMOVE 0x124 210 #define H_MULTICAST_CTRL 0x130 211 #define H_SET_XDABR 0x134 212 #define H_STUFF_TCE 0x138 213 #define H_PUT_TCE_INDIRECT 0x13C 214 #define H_CHANGE_LOGICAL_LAN_MAC 0x14C 215 #define H_VTERM_PARTNER_INFO 0x150 216 #define H_REGISTER_VTERM 0x154 217 #define H_FREE_VTERM 0x158 218 #define H_RESET_EVENTS 0x15C 219 #define H_ALLOC_RESOURCE 0x160 220 #define H_FREE_RESOURCE 0x164 221 #define H_MODIFY_QP 0x168 222 #define H_QUERY_QP 0x16C 223 #define H_REREGISTER_PMR 0x170 224 #define H_REGISTER_SMR 0x174 225 #define H_QUERY_MR 0x178 226 #define H_QUERY_MW 0x17C 227 #define H_QUERY_HCA 0x180 228 #define H_QUERY_PORT 0x184 229 #define H_MODIFY_PORT 0x188 230 #define H_DEFINE_AQP1 0x18C 231 #define H_GET_TRACE_BUFFER 0x190 232 #define H_DEFINE_AQP0 0x194 233 #define H_RESIZE_MR 0x198 234 #define H_ATTACH_MCQP 0x19C 235 #define H_DETACH_MCQP 0x1A0 236 #define H_CREATE_RPT 0x1A4 237 #define H_REMOVE_RPT 0x1A8 238 #define H_REGISTER_RPAGES 0x1AC 239 #define H_DISABLE_AND_GETC 0x1B0 240 #define H_ERROR_DATA 0x1B4 241 #define H_GET_HCA_INFO 0x1B8 242 #define H_GET_PERF_COUNT 0x1BC 243 #define H_MANAGE_TRACE 0x1C0 244 #define H_FREE_LOGICAL_LAN_BUFFER 0x1D4 245 #define H_QUERY_INT_STATE 0x1E4 246 #define H_POLL_PENDING 0x1D8 247 #define H_ILLAN_ATTRIBUTES 0x244 248 #define H_MODIFY_HEA_QP 0x250 249 #define H_QUERY_HEA_QP 0x254 250 #define H_QUERY_HEA 0x258 251 #define H_QUERY_HEA_PORT 0x25C 252 #define H_MODIFY_HEA_PORT 0x260 253 #define H_REG_BCMC 0x264 254 #define H_DEREG_BCMC 0x268 255 #define H_REGISTER_HEA_RPAGES 0x26C 256 #define H_DISABLE_AND_GET_HEA 0x270 257 #define H_GET_HEA_INFO 0x274 258 #define H_ALLOC_HEA_RESOURCE 0x278 259 #define H_ADD_CONN 0x284 260 #define H_DEL_CONN 0x288 261 #define H_JOIN 0x298 262 #define H_VASI_STATE 0x2A4 263 #define H_VIOCTL 0x2A8 264 #define H_ENABLE_CRQ 0x2B0 265 #define H_GET_EM_PARMS 0x2B8 266 #define H_SET_MPP 0x2D0 267 #define H_GET_MPP 0x2D4 268 #define H_REG_SUB_CRQ 0x2DC 269 #define H_HOME_NODE_ASSOCIATIVITY 0x2EC 270 #define H_FREE_SUB_CRQ 0x2E0 271 #define H_SEND_SUB_CRQ 0x2E4 272 #define H_SEND_SUB_CRQ_INDIRECT 0x2E8 273 #define H_BEST_ENERGY 0x2F4 274 #define H_XIRR_X 0x2FC 275 #define H_RANDOM 0x300 276 #define H_COP 0x304 277 #define H_GET_MPP_X 0x314 278 #define H_SET_MODE 0x31C 279 #define H_CLEAR_HPT 0x358 280 #define H_RESIZE_HPT_PREPARE 0x36C 281 #define H_RESIZE_HPT_COMMIT 0x370 282 #define H_REGISTER_PROC_TBL 0x37C 283 #define H_SIGNAL_SYS_RESET 0x380 284 #define H_INT_GET_SOURCE_INFO 0x3A8 285 #define H_INT_SET_SOURCE_CONFIG 0x3AC 286 #define H_INT_GET_SOURCE_CONFIG 0x3B0 287 #define H_INT_GET_QUEUE_INFO 0x3B4 288 #define H_INT_SET_QUEUE_CONFIG 0x3B8 289 #define H_INT_GET_QUEUE_CONFIG 0x3BC 290 #define H_INT_SET_OS_REPORTING_LINE 0x3C0 291 #define H_INT_GET_OS_REPORTING_LINE 0x3C4 292 #define H_INT_ESB 0x3C8 293 #define H_INT_SYNC 0x3CC 294 #define H_INT_RESET 0x3D0 295 #define MAX_HCALL_OPCODE H_INT_RESET 296 297 /* H_VIOCTL functions */ 298 #define H_GET_VIOA_DUMP_SIZE 0x01 299 #define H_GET_VIOA_DUMP 0x02 300 #define H_GET_ILLAN_NUM_VLAN_IDS 0x03 301 #define H_GET_ILLAN_VLAN_ID_LIST 0x04 302 #define H_GET_ILLAN_SWITCH_ID 0x05 303 #define H_DISABLE_MIGRATION 0x06 304 #define H_ENABLE_MIGRATION 0x07 305 #define H_GET_PARTNER_INFO 0x08 306 #define H_GET_PARTNER_WWPN_LIST 0x09 307 #define H_DISABLE_ALL_VIO_INTS 0x0A 308 #define H_DISABLE_VIO_INTERRUPT 0x0B 309 #define H_ENABLE_VIO_INTERRUPT 0x0C 310 #define H_GET_SESSION_TOKEN 0x19 311 #define H_SESSION_ERR_DETECTED 0x1A 312 313 314 /* Platform specific hcalls, used by KVM */ 315 #define H_RTAS 0xf000 316 317 /* "Platform specific hcalls", provided by PHYP */ 318 #define H_GET_24X7_CATALOG_PAGE 0xF078 319 #define H_GET_24X7_DATA 0xF07C 320 #define H_GET_PERF_COUNTER_INFO 0xF080 321 322 /* Values for 2nd argument to H_SET_MODE */ 323 #define H_SET_MODE_RESOURCE_SET_CIABR 1 324 #define H_SET_MODE_RESOURCE_SET_DAWR 2 325 #define H_SET_MODE_RESOURCE_ADDR_TRANS_MODE 3 326 #define H_SET_MODE_RESOURCE_LE 4 327 328 /* Values for argument to H_SIGNAL_SYS_RESET */ 329 #define H_SIGNAL_SYS_RESET_ALL -1 330 #define H_SIGNAL_SYS_RESET_ALL_OTHERS -2 331 /* >= 0 values are CPU number */ 332 333 /* Flag values used in H_REGISTER_PROC_TBL hcall */ 334 #define PROC_TABLE_OP_MASK 0x18 335 #define PROC_TABLE_DEREG 0x10 336 #define PROC_TABLE_NEW 0x18 337 #define PROC_TABLE_TYPE_MASK 0x06 338 #define PROC_TABLE_HPT_SLB 0x00 339 #define PROC_TABLE_HPT_PT 0x02 340 #define PROC_TABLE_RADIX 0x04 341 #define PROC_TABLE_GTSE 0x01 342 343 #ifndef __ASSEMBLY__ 344 345 /** 346 * plpar_hcall_norets: - Make a pseries hypervisor call with no return arguments 347 * @opcode: The hypervisor call to make. 348 * 349 * This call supports up to 7 arguments and only returns the status of 350 * the hcall. Use this version where possible, its slightly faster than 351 * the other plpar_hcalls. 352 */ 353 long plpar_hcall_norets(unsigned long opcode, ...); 354 355 /** 356 * plpar_hcall: - Make a pseries hypervisor call 357 * @opcode: The hypervisor call to make. 358 * @retbuf: Buffer to store up to 4 return arguments in. 359 * 360 * This call supports up to 6 arguments and 4 return arguments. Use 361 * PLPAR_HCALL_BUFSIZE to size the return argument buffer. 362 * 363 * Used for all but the craziest of phyp interfaces (see plpar_hcall9) 364 */ 365 #define PLPAR_HCALL_BUFSIZE 4 366 long plpar_hcall(unsigned long opcode, unsigned long *retbuf, ...); 367 368 /** 369 * plpar_hcall_raw: - Make a hypervisor call without calculating hcall stats 370 * @opcode: The hypervisor call to make. 371 * @retbuf: Buffer to store up to 4 return arguments in. 372 * 373 * This call supports up to 6 arguments and 4 return arguments. Use 374 * PLPAR_HCALL_BUFSIZE to size the return argument buffer. 375 * 376 * Used when phyp interface needs to be called in real mode. Similar to 377 * plpar_hcall, but plpar_hcall_raw works in real mode and does not 378 * calculate hypervisor call statistics. 379 */ 380 long plpar_hcall_raw(unsigned long opcode, unsigned long *retbuf, ...); 381 382 /** 383 * plpar_hcall9: - Make a pseries hypervisor call with up to 9 return arguments 384 * @opcode: The hypervisor call to make. 385 * @retbuf: Buffer to store up to 9 return arguments in. 386 * 387 * This call supports up to 9 arguments and 9 return arguments. Use 388 * PLPAR_HCALL9_BUFSIZE to size the return argument buffer. 389 */ 390 #define PLPAR_HCALL9_BUFSIZE 9 391 long plpar_hcall9(unsigned long opcode, unsigned long *retbuf, ...); 392 long plpar_hcall9_raw(unsigned long opcode, unsigned long *retbuf, ...); 393 394 struct hvcall_mpp_data { 395 unsigned long entitled_mem; 396 unsigned long mapped_mem; 397 unsigned short group_num; 398 unsigned short pool_num; 399 unsigned char mem_weight; 400 unsigned char unallocated_mem_weight; 401 unsigned long unallocated_entitlement; /* value in bytes */ 402 unsigned long pool_size; 403 signed long loan_request; 404 unsigned long backing_mem; 405 }; 406 407 int h_get_mpp(struct hvcall_mpp_data *); 408 409 struct hvcall_mpp_x_data { 410 unsigned long coalesced_bytes; 411 unsigned long pool_coalesced_bytes; 412 unsigned long pool_purr_cycles; 413 unsigned long pool_spurr_cycles; 414 unsigned long reserved[3]; 415 }; 416 417 int h_get_mpp_x(struct hvcall_mpp_x_data *mpp_x_data); 418 419 static inline unsigned int get_longbusy_msecs(int longbusy_rc) 420 { 421 switch (longbusy_rc) { 422 case H_LONG_BUSY_ORDER_1_MSEC: 423 return 1; 424 case H_LONG_BUSY_ORDER_10_MSEC: 425 return 10; 426 case H_LONG_BUSY_ORDER_100_MSEC: 427 return 100; 428 case H_LONG_BUSY_ORDER_1_SEC: 429 return 1000; 430 case H_LONG_BUSY_ORDER_10_SEC: 431 return 10000; 432 case H_LONG_BUSY_ORDER_100_SEC: 433 return 100000; 434 default: 435 return 1; 436 } 437 } 438 439 #endif /* __ASSEMBLY__ */ 440 #endif /* __KERNEL__ */ 441 #endif /* _ASM_POWERPC_HVCALL_H */ 442