1 /* 2 * ip22-mc.c: Routines for manipulating SGI Memory Controller. 3 * 4 * Copyright (C) 1996 David S. Miller (davem@davemloft.net) 5 * Copyright (C) 1999 Andrew R. Baker (andrewb@uab.edu) - Indigo2 changes 6 * Copyright (C) 2003 Ladislav Michl (ladis@linux-mips.org) 7 * Copyright (C) 2004 Peter Fuerst (pf@net.alphadv.de) - IP28 8 */ 9 10 #include <linux/init.h> 11 #include <linux/module.h> 12 #include <linux/kernel.h> 13 14 #include <asm/io.h> 15 #include <asm/bootinfo.h> 16 #include <asm/sgialib.h> 17 #include <asm/sgi/mc.h> 18 #include <asm/sgi/hpc3.h> 19 #include <asm/sgi/ip22.h> 20 21 struct sgimc_regs *sgimc; 22 23 EXPORT_SYMBOL(sgimc); 24 25 static inline unsigned long get_bank_addr(unsigned int memconfig) 26 { 27 return ((memconfig & SGIMC_MCONFIG_BASEADDR) << 28 ((sgimc->systemid & SGIMC_SYSID_MASKREV) >= 5 ? 24 : 22)); 29 } 30 31 static inline unsigned long get_bank_size(unsigned int memconfig) 32 { 33 return ((memconfig & SGIMC_MCONFIG_RMASK) + 0x0100) << 34 ((sgimc->systemid & SGIMC_SYSID_MASKREV) >= 5 ? 16 : 14); 35 } 36 37 static inline unsigned int get_bank_config(int bank) 38 { 39 unsigned int res = bank > 1 ? sgimc->mconfig1 : sgimc->mconfig0; 40 return bank % 2 ? res & 0xffff : res >> 16; 41 } 42 43 struct mem { 44 unsigned long addr; 45 unsigned long size; 46 }; 47 48 /* 49 * Detect installed memory, do some sanity checks and notify kernel about it 50 */ 51 static void __init probe_memory(void) 52 { 53 int i, j, found, cnt = 0; 54 struct mem bank[4]; 55 struct mem space[2] = {{SGIMC_SEG0_BADDR, 0}, {SGIMC_SEG1_BADDR, 0}}; 56 57 printk(KERN_INFO "MC: Probing memory configuration:\n"); 58 for (i = 0; i < ARRAY_SIZE(bank); i++) { 59 unsigned int tmp = get_bank_config(i); 60 if (!(tmp & SGIMC_MCONFIG_BVALID)) 61 continue; 62 63 bank[cnt].size = get_bank_size(tmp); 64 bank[cnt].addr = get_bank_addr(tmp); 65 printk(KERN_INFO " bank%d: %3ldM @ %08lx\n", 66 i, bank[cnt].size / 1024 / 1024, bank[cnt].addr); 67 cnt++; 68 } 69 70 /* And you thought bubble sort is dead algorithm... */ 71 do { 72 unsigned long addr, size; 73 74 found = 0; 75 for (i = 1; i < cnt; i++) 76 if (bank[i-1].addr > bank[i].addr) { 77 addr = bank[i].addr; 78 size = bank[i].size; 79 bank[i].addr = bank[i-1].addr; 80 bank[i].size = bank[i-1].size; 81 bank[i-1].addr = addr; 82 bank[i-1].size = size; 83 found = 1; 84 } 85 } while (found); 86 87 /* Figure out how are memory banks mapped into spaces */ 88 for (i = 0; i < cnt; i++) { 89 found = 0; 90 for (j = 0; j < ARRAY_SIZE(space) && !found; j++) 91 if (space[j].addr + space[j].size == bank[i].addr) { 92 space[j].size += bank[i].size; 93 found = 1; 94 } 95 /* There is either hole or overlapping memory */ 96 if (!found) 97 printk(KERN_CRIT "MC: Memory configuration mismatch " 98 "(%08lx), expect Bus Error soon\n", 99 bank[i].addr); 100 } 101 102 for (i = 0; i < ARRAY_SIZE(space); i++) 103 if (space[i].size) 104 add_memory_region(space[i].addr, space[i].size, 105 BOOT_MEM_RAM); 106 } 107 108 void __init sgimc_init(void) 109 { 110 u32 tmp; 111 112 /* ioremap can't fail */ 113 sgimc = (struct sgimc_regs *) 114 ioremap(SGIMC_BASE, sizeof(struct sgimc_regs)); 115 116 printk(KERN_INFO "MC: SGI memory controller Revision %d\n", 117 (int) sgimc->systemid & SGIMC_SYSID_MASKREV); 118 119 /* Place the MC into a known state. This must be done before 120 * interrupts are first enabled etc. 121 */ 122 123 /* Step 0: Make sure we turn off the watchdog in case it's 124 * still running (which might be the case after a 125 * soft reboot). 126 */ 127 tmp = sgimc->cpuctrl0; 128 tmp &= ~SGIMC_CCTRL0_WDOG; 129 sgimc->cpuctrl0 = tmp; 130 131 /* Step 1: The CPU/GIO error status registers will not latch 132 * up a new error status until the register has been 133 * cleared by the cpu. These status registers are 134 * cleared by writing any value to them. 135 */ 136 sgimc->cstat = sgimc->gstat = 0; 137 138 /* Step 2: Enable all parity checking in cpu control register 139 * zero. 140 */ 141 /* don't touch parity settings for IP28 */ 142 tmp = sgimc->cpuctrl0; 143 #ifndef CONFIG_SGI_IP28 144 tmp |= SGIMC_CCTRL0_EPERRGIO | SGIMC_CCTRL0_EPERRMEM; 145 #endif 146 tmp |= SGIMC_CCTRL0_R4KNOCHKPARR; 147 sgimc->cpuctrl0 = tmp; 148 149 /* Step 3: Setup the MC write buffer depth, this is controlled 150 * in cpu control register 1 in the lower 4 bits. 151 */ 152 tmp = sgimc->cpuctrl1; 153 tmp &= ~0xf; 154 tmp |= 0xd; 155 sgimc->cpuctrl1 = tmp; 156 157 /* Step 4: Initialize the RPSS divider register to run as fast 158 * as it can correctly operate. The register is laid 159 * out as follows: 160 * 161 * ---------------------------------------- 162 * | RESERVED | INCREMENT | DIVIDER | 163 * ---------------------------------------- 164 * 31 16 15 8 7 0 165 * 166 * DIVIDER determines how often a 'tick' happens, 167 * INCREMENT determines by how the RPSS increment 168 * registers value increases at each 'tick'. Thus, 169 * for IP22 we get INCREMENT=1, DIVIDER=1 == 0x101 170 */ 171 sgimc->divider = 0x101; 172 173 /* Step 5: Initialize GIO64 arbitrator configuration register. 174 * 175 * NOTE: HPC init code in sgihpc_init() must run before us because 176 * we need to know Guiness vs. FullHouse and the board 177 * revision on this machine. You have been warned. 178 */ 179 180 /* First the basic invariants across all GIO64 implementations. */ 181 tmp = sgimc->giopar & SGIMC_GIOPAR_GFX64; /* keep gfx 64bit settings */ 182 tmp |= SGIMC_GIOPAR_HPC64; /* All 1st HPC's interface at 64bits */ 183 tmp |= SGIMC_GIOPAR_ONEBUS; /* Only one physical GIO bus exists */ 184 185 if (ip22_is_fullhouse()) { 186 /* Fullhouse specific settings. */ 187 if (SGIOC_SYSID_BOARDREV(sgioc->sysid) < 2) { 188 tmp |= SGIMC_GIOPAR_HPC264; /* 2nd HPC at 64bits */ 189 tmp |= SGIMC_GIOPAR_PLINEEXP0; /* exp0 pipelines */ 190 tmp |= SGIMC_GIOPAR_MASTEREXP1; /* exp1 masters */ 191 tmp |= SGIMC_GIOPAR_RTIMEEXP0; /* exp0 is realtime */ 192 } else { 193 tmp |= SGIMC_GIOPAR_HPC264; /* 2nd HPC 64bits */ 194 tmp |= SGIMC_GIOPAR_PLINEEXP0; /* exp[01] pipelined */ 195 tmp |= SGIMC_GIOPAR_PLINEEXP1; 196 tmp |= SGIMC_GIOPAR_MASTEREISA; /* EISA masters */ 197 } 198 } else { 199 /* Guiness specific settings. */ 200 tmp |= SGIMC_GIOPAR_EISA64; /* MC talks to EISA at 64bits */ 201 tmp |= SGIMC_GIOPAR_MASTEREISA; /* EISA bus can act as master */ 202 } 203 sgimc->giopar = tmp; /* poof */ 204 205 probe_memory(); 206 } 207 208 void __init prom_meminit(void) {} 209 void __init prom_free_prom_memory(void) 210 { 211 #ifdef CONFIG_SGI_IP28 212 u32 mconfig1; 213 unsigned long flags; 214 spinlock_t lock; 215 216 /* 217 * because ARCS accesses memory uncached we wait until ARCS 218 * isn't needed any longer, before we switch from slow to 219 * normal mode 220 */ 221 spin_lock_irqsave(&lock, flags); 222 mconfig1 = sgimc->mconfig1; 223 /* map ECC register */ 224 sgimc->mconfig1 = (mconfig1 & 0xffff0000) | 0x2060; 225 iob(); 226 /* switch to normal mode */ 227 *(unsigned long *)PHYS_TO_XKSEG_UNCACHED(0x60000000) = 0; 228 iob(); 229 /* reduce WR_COL */ 230 sgimc->cmacc = (sgimc->cmacc & ~0xf) | 4; 231 iob(); 232 /* restore old config */ 233 sgimc->mconfig1 = mconfig1; 234 iob(); 235 spin_unlock_irqrestore(&lock, flags); 236 #endif 237 } 238