1// SPDX-License-Identifier: (GPL-2.0+ OR MIT) 2/* 3 * Google Gru-Chromebook shared properties 4 * 5 * Copyright 2018 Google, Inc 6 */ 7 8#include "rk3399-gru.dtsi" 9 10/ { 11 pp900_ap: pp900-ap { 12 compatible = "regulator-fixed"; 13 regulator-name = "pp900_ap"; 14 15 /* EC turns on w/ pp900_ap_en; always on for AP */ 16 regulator-always-on; 17 regulator-boot-on; 18 regulator-min-microvolt = <900000>; 19 regulator-max-microvolt = <900000>; 20 21 vin-supply = <&ppvar_sys>; 22 }; 23 24 /* EC turns on w/ pp900_usb_en */ 25 pp900_usb: pp900-ap { 26 }; 27 28 /* EC turns on w/ pp900_pcie_en */ 29 pp900_pcie: pp900-ap { 30 }; 31 32 pp3000: pp3000 { 33 compatible = "regulator-fixed"; 34 regulator-name = "pp3000"; 35 pinctrl-names = "default"; 36 pinctrl-0 = <&pp3000_en>; 37 38 enable-active-high; 39 gpio = <&gpio0 12 GPIO_ACTIVE_HIGH>; 40 41 regulator-always-on; 42 regulator-boot-on; 43 regulator-min-microvolt = <3000000>; 44 regulator-max-microvolt = <3000000>; 45 46 vin-supply = <&ppvar_sys>; 47 }; 48 49 ppvar_centerlogic_pwm: ppvar-centerlogic-pwm { 50 compatible = "pwm-regulator"; 51 regulator-name = "ppvar_centerlogic_pwm"; 52 53 pwms = <&pwm3 0 3337 0>; 54 pwm-supply = <&ppvar_sys>; 55 pwm-dutycycle-range = <100 0>; 56 pwm-dutycycle-unit = <100>; 57 58 /* EC turns on w/ ppvar_centerlogic_en; always on for AP */ 59 regulator-always-on; 60 regulator-boot-on; 61 regulator-min-microvolt = <799434>; 62 regulator-max-microvolt = <1049925>; 63 }; 64 65 ppvar_centerlogic: ppvar-centerlogic { 66 compatible = "vctrl-regulator"; 67 regulator-name = "ppvar_centerlogic"; 68 69 regulator-min-microvolt = <799434>; 70 regulator-max-microvolt = <1049925>; 71 72 ctrl-supply = <&ppvar_centerlogic_pwm>; 73 ctrl-voltage-range = <799434 1049925>; 74 75 regulator-settling-time-up-us = <378>; 76 min-slew-down-rate = <225>; 77 ovp-threshold-percent = <16>; 78 }; 79 80 /* Schematics call this PPVAR even though it's fixed */ 81 ppvar_logic: ppvar-logic { 82 compatible = "regulator-fixed"; 83 regulator-name = "ppvar_logic"; 84 85 /* EC turns on w/ ppvar_logic_en; always on for AP */ 86 regulator-always-on; 87 regulator-boot-on; 88 regulator-min-microvolt = <900000>; 89 regulator-max-microvolt = <900000>; 90 91 vin-supply = <&ppvar_sys>; 92 }; 93 94 pp1800_audio: pp1800-audio { 95 compatible = "regulator-fixed"; 96 regulator-name = "pp1800_audio"; 97 pinctrl-names = "default"; 98 pinctrl-0 = <&pp1800_audio_en>; 99 100 enable-active-high; 101 gpio = <&gpio0 2 GPIO_ACTIVE_HIGH>; 102 103 regulator-always-on; 104 regulator-boot-on; 105 106 vin-supply = <&pp1800>; 107 }; 108 109 /* gpio is shared with pp3300_wifi_bt */ 110 pp1800_pcie: pp1800-pcie { 111 compatible = "regulator-fixed"; 112 regulator-name = "pp1800_pcie"; 113 pinctrl-names = "default"; 114 pinctrl-0 = <&wlan_module_pd_l>; 115 116 enable-active-high; 117 gpio = <&gpio0 4 GPIO_ACTIVE_HIGH>; 118 119 /* 120 * Need to wait 1ms + ramp-up time before we can power on WiFi. 121 * This has been approximated as 8ms total. 122 */ 123 regulator-enable-ramp-delay = <8000>; 124 125 vin-supply = <&pp1800>; 126 }; 127 128 /* Always on; plain and simple */ 129 pp3000_ap: pp3000_emmc: pp3000 { 130 }; 131 132 pp1500_ap_io: pp1500-ap-io { 133 compatible = "regulator-fixed"; 134 regulator-name = "pp1500_ap_io"; 135 pinctrl-names = "default"; 136 pinctrl-0 = <&pp1500_en>; 137 138 enable-active-high; 139 gpio = <&gpio0 10 GPIO_ACTIVE_HIGH>; 140 141 regulator-always-on; 142 regulator-boot-on; 143 regulator-min-microvolt = <1500000>; 144 regulator-max-microvolt = <1500000>; 145 146 vin-supply = <&pp1800>; 147 }; 148 149 pp3300_disp: pp3300-disp { 150 compatible = "regulator-fixed"; 151 regulator-name = "pp3300_disp"; 152 pinctrl-names = "default"; 153 pinctrl-0 = <&pp3300_disp_en>; 154 155 enable-active-high; 156 gpio = <&gpio4 27 GPIO_ACTIVE_HIGH>; 157 158 startup-delay-us = <2000>; 159 vin-supply = <&pp3300>; 160 }; 161 162 /* EC turns on w/ pp3300_usb_en_l */ 163 pp3300_usb: pp3300 { 164 }; 165 166 /* gpio is shared with pp1800_pcie and pinctrl is set there */ 167 pp3300_wifi_bt: pp3300-wifi-bt { 168 compatible = "regulator-fixed"; 169 regulator-name = "pp3300_wifi_bt"; 170 171 enable-active-high; 172 gpio = <&gpio0 4 GPIO_ACTIVE_HIGH>; 173 174 vin-supply = <&pp3300>; 175 }; 176 177 /* 178 * This is a bit of a hack. The WiFi module should be reset at least 179 * 1ms after its regulators have ramped up (max rampup time is ~7ms). 180 * With some stretching of the imagination, we can call the 1.8V 181 * regulator a supply. 182 */ 183 wlan_pd_n: wlan-pd-n { 184 compatible = "regulator-fixed"; 185 regulator-name = "wlan_pd_n"; 186 pinctrl-names = "default"; 187 pinctrl-0 = <&wlan_module_reset_l>; 188 189 enable-active-high; 190 gpio = <&gpio1 11 GPIO_ACTIVE_HIGH>; 191 192 vin-supply = <&pp1800_pcie>; 193 }; 194 195 backlight: backlight { 196 compatible = "pwm-backlight"; 197 enable-gpios = <&gpio1 17 GPIO_ACTIVE_HIGH>; 198 power-supply = <&pp3300_disp>; 199 pinctrl-names = "default"; 200 pinctrl-0 = <&bl_en>; 201 pwm-delay-us = <10000>; 202 }; 203 204 gpio_keys: gpio-keys { 205 compatible = "gpio-keys"; 206 pinctrl-names = "default"; 207 pinctrl-0 = <&bt_host_wake_l>; 208 209 wake_on_bt: wake-on-bt { 210 label = "Wake-on-Bluetooth"; 211 gpios = <&gpio0 3 GPIO_ACTIVE_LOW>; 212 linux,code = <KEY_WAKEUP>; 213 wakeup-source; 214 }; 215 }; 216}; 217 218&ppvar_bigcpu { 219 min-slew-down-rate = <225>; 220 ovp-threshold-percent = <16>; 221}; 222 223&ppvar_litcpu { 224 min-slew-down-rate = <225>; 225 ovp-threshold-percent = <16>; 226}; 227 228&ppvar_gpu { 229 min-slew-down-rate = <225>; 230 ovp-threshold-percent = <16>; 231}; 232 233&cdn_dp { 234 extcon = <&usbc_extcon0>, <&usbc_extcon1>; 235}; 236 237&edp { 238 status = "okay"; 239 240 ports { 241 edp_out: port@1 { 242 reg = <1>; 243 #address-cells = <1>; 244 #size-cells = <0>; 245 246 edp_out_panel: endpoint@0 { 247 reg = <0>; 248 remote-endpoint = <&panel_in_edp>; 249 }; 250 }; 251 }; 252}; 253 254&gpio0 { 255 gpio-line-names = /* GPIO0 A 0-7 */ 256 "AP_RTC_CLK_IN", 257 "EC_AP_INT_L", 258 "PP1800_AUDIO_EN", 259 "BT_HOST_WAKE_L", 260 "WLAN_MODULE_PD_L", 261 "H1_INT_OD_L", 262 "CENTERLOGIC_DVS_PWM", 263 "", 264 265 /* GPIO0 B 0-4 */ 266 "WIFI_HOST_WAKE_L", 267 "PMUIO2_33_18_L", 268 "PP1500_EN", 269 "AP_EC_WARM_RESET_REQ", 270 "PP3000_EN"; 271}; 272 273&gpio1 { 274 gpio-line-names = /* GPIO1 A 0-7 */ 275 "", 276 "", 277 "SPK_PA_EN", 278 "", 279 "TRACKPAD_INT_L", 280 "AP_EC_S3_S0_L", 281 "AP_EC_OVERTEMP", 282 "AP_SPI_FLASH_MISO", 283 284 /* GPIO1 B 0-7 */ 285 "AP_SPI_FLASH_MOSI_R", 286 "AP_SPI_FLASH_CLK_R", 287 "AP_SPI_FLASH_CS_L_R", 288 "WLAN_MODULE_RESET_L", 289 "WIFI_DISABLE_L", 290 "MIC_INT", 291 "", 292 "AP_I2C_DVS_SDA", 293 294 /* GPIO1 C 0-7 */ 295 "AP_I2C_DVS_SCL", 296 "AP_BL_EN", 297 /* 298 * AP_FLASH_WP is crossystem ABI. Schematics call it 299 * AP_FW_WP or CPU1_FW_WP, depending on the variant. 300 */ 301 "AP_FLASH_WP", 302 "LITCPU_DVS_PWM", 303 "AP_I2C_AUDIO_SDA", 304 "AP_I2C_AUDIO_SCL", 305 "", 306 "HEADSET_INT_L"; 307}; 308 309&gpio2 { 310 gpio-line-names = /* GPIO2 A 0-7 */ 311 "", 312 "", 313 "SD_IO_PWR_EN", 314 "", 315 "", 316 "", 317 "", 318 "", 319 320 /* GPIO2 B 0-7 */ 321 "", 322 "", 323 "", 324 "", 325 "", 326 "", 327 "", 328 "", 329 330 /* GPIO2 C 0-7 */ 331 "", 332 "", 333 "", 334 "", 335 "AP_SPI_EC_MISO", 336 "AP_SPI_EC_MOSI", 337 "AP_SPI_EC_CLK", 338 "AP_SPI_EC_CS_L", 339 340 /* GPIO2 D 0-4 */ 341 "BT_DEV_WAKE_L", 342 "", 343 "WIFI_PCIE_CLKREQ_L", 344 "WIFI_PERST_L", 345 "SD_PWR_3000_1800_L"; 346}; 347 348&gpio3 { 349 gpio-line-names = /* GPIO3 A 0-7 */ 350 "", 351 "", 352 "", 353 "", 354 "AP_SPI_TPM_MISO", 355 "AP_SPI_TPM_MOSI_R", 356 "AP_SPI_TPM_CLK_R", 357 "AP_SPI_TPM_CS_L_R", 358 359 /* GPIO3 B 0-7 */ 360 "EC_IN_RW", 361 "", 362 "AP_I2C_TP_SDA", 363 "AP_I2C_TP_SCL", 364 "AP_I2C_TP_PU_EN", 365 "TOUCH_INT_L", 366 "", 367 "", 368 369 /* GPIO3 C 0-7 */ 370 "", 371 "", 372 "", 373 "", 374 "", 375 "", 376 "", 377 "", 378 379 /* GPIO3 D 0-7 */ 380 "I2S0_SCLK", 381 "I2S0_LRCK_RX", 382 "I2S0_LRCK_TX", 383 "I2S0_SDI_0", 384 "I2S0_SDI_1", 385 "", 386 "I2S0_SDO_1", 387 "I2S0_SDO_0"; 388}; 389 390&gpio4 { 391 gpio-line-names = /* GPIO4 A 0-7 */ 392 "I2S_MCLK", 393 "AP_I2C_MIC_SDA", 394 "AP_I2C_MIC_SCL", 395 "", 396 "", 397 "", 398 "", 399 "", 400 401 /* GPIO4 B 0-7 */ 402 "", 403 "", 404 "", 405 "", 406 "", 407 "", 408 "", 409 "", 410 411 /* GPIO4 C 0-7 */ 412 "AP_I2C_TS_SDA", 413 "AP_I2C_TS_SCL", 414 "GPU_DVS_PWM", 415 "UART_DBG_TX_AP_RX", 416 "UART_AP_TX_DBG_RX", 417 "", 418 "BIGCPU_DVS_PWM", 419 "EDP_HPD_3V0", 420 421 /* GPIO4 D 0-5 */ 422 "SD_CARD_DET_L", 423 "USB_DP_HPD", 424 "TOUCH_RESET_L", 425 "PP3300_DISP_EN", 426 "", 427 "SD_SLOT_PWR_EN"; 428}; 429 430ap_i2c_mic: &i2c1 { 431 status = "okay"; 432 433 clock-frequency = <400000>; 434 435 /* These are relatively safe rise/fall times */ 436 i2c-scl-falling-time-ns = <50>; 437 i2c-scl-rising-time-ns = <300>; 438 439 headsetcodec: rt5514@57 { 440 compatible = "realtek,rt5514"; 441 reg = <0x57>; 442 realtek,dmic-init-delay-ms = <20>; 443 }; 444}; 445 446ap_i2c_tp: &i2c5 { 447 status = "okay"; 448 449 clock-frequency = <400000>; 450 451 /* These are relatively safe rise/fall times */ 452 i2c-scl-falling-time-ns = <50>; 453 i2c-scl-rising-time-ns = <300>; 454 455 /* 456 * Note strange pullup enable. Apparently this avoids leakage but 457 * still allows us to get nice 4.7K pullups for high speed i2c 458 * transfers. Basically we want the pullup on whenever the ap is 459 * alive, so the "en" pin just gets set to output high. 460 */ 461 pinctrl-0 = <&i2c5_xfer &ap_i2c_tp_pu_en>; 462}; 463 464&cros_ec { 465 cros_ec_pwm: ec-pwm { 466 compatible = "google,cros-ec-pwm"; 467 #pwm-cells = <1>; 468 }; 469 470 usbc_extcon1: extcon1 { 471 compatible = "google,extcon-usbc-cros-ec"; 472 google,usb-port-id = <1>; 473 }; 474}; 475 476&sound { 477 rockchip,codec = <&max98357a &headsetcodec 478 &codec &wacky_spi_audio &cdn_dp>; 479}; 480 481&spi2 { 482 wacky_spi_audio: spi2@0 { 483 compatible = "realtek,rt5514"; 484 reg = <0>; 485 interrupt-parent = <&gpio1>; 486 interrupts = <13 IRQ_TYPE_LEVEL_HIGH>; 487 pinctrl-names = "default"; 488 pinctrl-0 = <&mic_int>; 489 /* May run faster once verified. */ 490 spi-max-frequency = <10000000>; 491 wakeup-source; 492 }; 493}; 494 495&pci_rootport { 496 mvl_wifi: wifi@0,0 { 497 compatible = "pci1b4b,2b42"; 498 reg = <0x83010000 0x0 0x00000000 0x0 0x00100000 499 0x83010000 0x0 0x00100000 0x0 0x00100000>; 500 interrupt-parent = <&gpio0>; 501 interrupts = <8 IRQ_TYPE_LEVEL_LOW>; 502 pinctrl-names = "default"; 503 pinctrl-0 = <&wlan_host_wake_l>; 504 wakeup-source; 505 }; 506}; 507 508&tcphy1 { 509 status = "okay"; 510 extcon = <&usbc_extcon1>; 511}; 512 513&u2phy1 { 514 status = "okay"; 515}; 516 517&usb_host0_ehci { 518 status = "okay"; 519}; 520 521&usb_host1_ehci { 522 status = "okay"; 523}; 524 525&usb_host1_ohci { 526 status = "okay"; 527}; 528 529&usbdrd3_1 { 530 status = "okay"; 531 extcon = <&usbc_extcon1>; 532}; 533 534&usbdrd_dwc3_1 { 535 status = "okay"; 536 dr_mode = "host"; 537}; 538 539&pinctrl { 540 discrete-regulators { 541 pp1500_en: pp1500-en { 542 rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO 543 &pcfg_pull_none>; 544 }; 545 546 pp1800_audio_en: pp1800-audio-en { 547 rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO 548 &pcfg_pull_down>; 549 }; 550 551 pp3000_en: pp3000-en { 552 rockchip,pins = <0 RK_PB4 RK_FUNC_GPIO 553 &pcfg_pull_none>; 554 }; 555 556 pp3300_disp_en: pp3300-disp-en { 557 rockchip,pins = <4 RK_PD3 RK_FUNC_GPIO 558 &pcfg_pull_none>; 559 }; 560 561 wlan_module_pd_l: wlan-module-pd-l { 562 rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO 563 &pcfg_pull_down>; 564 }; 565 }; 566}; 567 568&wifi { 569 wifi_perst_l: wifi-perst-l { 570 rockchip,pins = <2 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>; 571 }; 572 573 wlan_host_wake_l: wlan-host-wake-l { 574 rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>; 575 }; 576}; 577