1// SPDX-License-Identifier: (GPL-2.0+ OR MIT) 2/* 3 * Google Trogdor board device tree source 4 * 5 * Copyright 2020 Google LLC. 6 */ 7 8/dts-v1/; 9 10#include "sc7180-trogdor.dtsi" 11/* Must come after sc7180-trogdor.dtsi to modify cros_ec */ 12#include <arm/cros-ec-keyboard.dtsi> 13#include "sc7180-trogdor-ti-sn65dsi86.dtsi" 14 15/ { 16 model = "Google Trogdor (rev1+)"; 17 compatible = "google,trogdor", "qcom,sc7180"; 18}; 19 20&ap_tp_i2c { 21 status = "okay"; 22}; 23 24ap_ts_pen_1v8: &i2c4 { 25 status = "okay"; 26 clock-frequency = <400000>; 27 28 ap_ts: touchscreen@10 { 29 compatible = "elan,ekth3500"; 30 reg = <0x10>; 31 pinctrl-names = "default"; 32 pinctrl-0 = <&ts_int_l>, <&ts_reset_l>; 33 34 interrupt-parent = <&tlmm>; 35 interrupts = <9 IRQ_TYPE_LEVEL_LOW>; 36 37 vcc33-supply = <&pp3300_ts>; 38 39 reset-gpios = <&tlmm 8 GPIO_ACTIVE_LOW>; 40 }; 41}; 42 43&panel { 44 compatible = "auo,b116xa01"; 45}; 46 47&sdhc_2 { 48 status = "okay"; 49}; 50 51&trackpad { 52 interrupts = <58 IRQ_TYPE_EDGE_FALLING>; 53}; 54 55&usb_hub_2_x { 56 vdd-supply = <&pp3300_l7c>; 57}; 58 59&usb_hub_3_x { 60 vdd-supply = <&pp3300_l7c>; 61}; 62 63/* PINCTRL - modifications to sc7180-trogdor.dtsi */ 64 65&trackpad_int_1v8_odl { 66 pins = "gpio58"; 67}; 68 69/* PINCTRL - board-specific pinctrl */ 70 71&tlmm { 72 gpio-line-names = "ESIM_MISO", 73 "ESIM_MOSI", 74 "ESIM_CLK", 75 "ESIM_CS_L", 76 "FP_TO_AP_IRQ_L", 77 "FP_RST_L", 78 "AP_TP_I2C_SDA", 79 "AP_TP_I2C_SCL", 80 "TS_RESET_L", 81 "TS_INT_L", 82 "FPMCU_BOOT0", 83 "EDP_BRIJ_IRQ", 84 "AP_EDP_BKLTEN", 85 "", 86 "", 87 "EDP_BRIJ_I2C_SDA", 88 "EDP_BRIJ_I2C_SCL", 89 "HUB_RST_L", 90 "PEN_RST_ODL", 91 "AP_RAM_ID1", 92 "AP_RAM_ID2", 93 "PEN_IRQ_L", 94 "FPMCU_SEL", 95 "AMP_EN", 96 "P_SENSOR_INT_L", 97 "AP_SAR_SENSOR_SDA", 98 "AP_SAR_SENSOR_SCL", 99 "", 100 "HP_IRQ", 101 "AP_RAM_ID0", 102 "EN_PP3300_DX_EDP", 103 "AP_BRD_ID2", 104 "BRIJ_SUSPEND", 105 "AP_BRD_ID0", 106 "AP_H1_SPI_MISO", 107 "AP_H1_SPI_MOSI", 108 "AP_H1_SPI_CLK", 109 "AP_H1_SPI_CS_L", 110 "", 111 "", 112 "", 113 "", 114 "H1_AP_INT_ODL", 115 "", 116 "UART_AP_TX_DBG_RX", 117 "UART_DBG_TX_AP_RX", 118 "HP_I2C_SDA", 119 "HP_I2C_SCL", 120 "FORCED_USB_BOOT", 121 "", 122 "", 123 "AMP_DIN", 124 "PEN_PDCT_L", 125 "HP_BCLK", 126 "HP_LRCLK", 127 "HP_DOUT", 128 "HP_DIN", 129 "HP_MCLK", 130 "TRACKPAD_INT_1V8_ODL", 131 "AP_EC_SPI_MISO", 132 "AP_EC_SPI_MOSI", 133 "AP_EC_SPI_CLK", 134 "AP_EC_SPI_CS_L", 135 "AP_SPI_CLK", 136 "AP_SPI_MOSI", 137 "AP_SPI_MISO", 138 /* 139 * AP_FLASH_WP_L is crossystem ABI. Schematics 140 * call it BIOS_FLASH_WP_L. 141 */ 142 "AP_FLASH_WP_L", 143 "DBG_SPI_HOLD_L", 144 "AP_SPI_CS0_L", 145 "SD_CD_ODL", 146 "", 147 "", 148 "", 149 "", 150 "", 151 "UIM2_DATA", 152 "UIM2_CLK", 153 "UIM2_RST", 154 "UIM2_PRESENT", 155 "UIM1_DATA", 156 "UIM1_CLK", 157 "UIM1_RST", 158 "", 159 "EN_PP3300_CODEC", 160 "EN_PP3300_HUB", 161 "", 162 "AP_SPI_FP_MISO", 163 "AP_SPI_FP_MOSI", 164 "AP_SPI_FP_CLK", 165 "AP_SPI_FP_CS_L", 166 "AP_SKU_ID1", 167 "AP_RST_REQ", 168 "", 169 "AP_BRD_ID1", 170 "AP_EC_INT_L", 171 "", 172 "", 173 "", 174 "", 175 "", 176 "", 177 "", 178 "", 179 "", 180 "EDP_BRIJ_EN", 181 "AP_SKU_ID0", 182 "", 183 "", 184 "", 185 "", 186 "", 187 "", 188 "", 189 "", 190 "", 191 "AP_TS_PEN_I2C_SDA", 192 "AP_TS_PEN_I2C_SCL", 193 "DP_HOT_PLUG_DET", 194 "EC_IN_RW_ODL"; 195}; 196