1// SPDX-License-Identifier: (GPL-2.0+ OR MIT) 2/* Copyright 2018 Google LLC. */ 3 4#include <dt-bindings/iio/qcom,spmi-vadc.h> 5#include <dt-bindings/input/linux-event-codes.h> 6#include <dt-bindings/interrupt-controller/irq.h> 7#include <dt-bindings/spmi/spmi.h> 8#include <dt-bindings/thermal/thermal.h> 9 10/ { 11 thermal-zones { 12 pm8998 { 13 polling-delay-passive = <250>; 14 polling-delay = <1000>; 15 16 thermal-sensors = <&pm8998_temp>; 17 18 trips { 19 pm8998_alert0: pm8998-alert0 { 20 temperature = <105000>; 21 hysteresis = <2000>; 22 type = "passive"; 23 }; 24 pm8998_crit: pm8998-crit { 25 temperature = <125000>; 26 hysteresis = <2000>; 27 type = "critical"; 28 }; 29 }; 30 }; 31 }; 32}; 33 34&spmi_bus { 35 pm8998_lsid0: pmic@0 { 36 compatible = "qcom,pm8998", "qcom,spmi-pmic"; 37 reg = <0x0 SPMI_USID>; 38 #address-cells = <1>; 39 #size-cells = <0>; 40 41 pm8998_pon: pon@800 { 42 compatible = "qcom,pm8916-pon"; 43 44 reg = <0x800>; 45 mode-bootloader = <0x2>; 46 mode-recovery = <0x1>; 47 48 pwrkey { 49 compatible = "qcom,pm8941-pwrkey"; 50 interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>; 51 debounce = <15625>; 52 bias-pull-up; 53 linux,code = <KEY_POWER>; 54 }; 55 }; 56 57 pm8998_temp: temp-alarm@2400 { 58 compatible = "qcom,spmi-temp-alarm"; 59 reg = <0x2400>; 60 interrupts = <0x0 0x24 0x0 IRQ_TYPE_EDGE_RISING>; 61 io-channels = <&pm8998_adc ADC5_DIE_TEMP>; 62 io-channel-names = "thermal"; 63 #thermal-sensor-cells = <0>; 64 }; 65 66 pm8998_coincell: coincell@2800 { 67 compatible = "qcom,pm8941-coincell"; 68 reg = <0x2800>; 69 70 status = "disabled"; 71 }; 72 73 pm8998_adc: adc@3100 { 74 compatible = "qcom,spmi-adc-rev2"; 75 reg = <0x3100>; 76 interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>; 77 #address-cells = <1>; 78 #size-cells = <0>; 79 #io-channel-cells = <1>; 80 81 adc-chan@ADC5_DIE_TEMP { 82 reg = <ADC5_DIE_TEMP>; 83 label = "die_temp"; 84 }; 85 }; 86 87 rtc@6000 { 88 compatible = "qcom,pm8941-rtc"; 89 reg = <0x6000>, <0x6100>; 90 reg-names = "rtc", "alarm"; 91 interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>; 92 }; 93 94 pm8998_gpio: gpios@c000 { 95 compatible = "qcom,pm8998-gpio", "qcom,spmi-gpio"; 96 reg = <0xc000>; 97 gpio-controller; 98 gpio-ranges = <&pm8998_gpio 0 0 26>; 99 #gpio-cells = <2>; 100 interrupt-controller; 101 #interrupt-cells = <2>; 102 }; 103 104 }; 105 106 pm8998_lsid1: pmic@1 { 107 compatible = "qcom,pm8998", "qcom,spmi-pmic"; 108 reg = <0x1 SPMI_USID>; 109 #address-cells = <1>; 110 #size-cells = <0>; 111 }; 112}; 113