xref: /linux/arch/arm/boot/dts/rockchip/rv1126-sonoff-ihost.dtsi (revision bf5802238dc181b1f7375d358af1d01cd72d1c11)
1// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
2/*
3 * Copyright (c) 2020 Rockchip Electronics Co., Ltd.
4 * Copyright (c) 2022 Edgeble AI Technologies Pvt. Ltd.
5 */
6
7/ {
8	aliases {
9		ethernet0 = &gmac;
10		mmc0 = &emmc;
11	};
12
13	chosen {
14		stdout-path = "serial2:1500000n8";
15	};
16
17	vcc5v0_sys: regulator-vcc5v0-sys {
18		compatible = "regulator-fixed";
19		regulator-name = "vcc5v0_sys";
20		regulator-always-on;
21		regulator-boot-on;
22		regulator-min-microvolt = <5000000>;
23		regulator-max-microvolt = <5000000>;
24	};
25
26	sdio_pwrseq: pwrseq-sdio {
27		compatible = "mmc-pwrseq-simple";
28		clocks = <&rk809 1>;
29		clock-names = "ext_clock";
30		pinctrl-names = "default";
31		pinctrl-0 = <&wifi_enable_h>;
32		reset-gpios = <&gpio1 RK_PD0 GPIO_ACTIVE_LOW>;
33	};
34};
35
36&emmc {
37	bus-width = <8>;
38	cap-mmc-highspeed;
39	mmc-hs200-1_8v;
40	non-removable;
41	pinctrl-names = "default";
42	pinctrl-0 = <&emmc_bus8 &emmc_cmd &emmc_clk &emmc_rstnout>;
43	rockchip,default-sample-phase = <90>;
44	vmmc-supply = <&vcc_3v3>;
45	vqmmc-supply = <&vcc_1v8>;
46	status = "okay";
47};
48
49&i2c0 {
50	clock-frequency = <400000>;
51	status = "okay";
52
53	rk809: pmic@20 {
54		compatible = "rockchip,rk809";
55		reg = <0x20>;
56		interrupt-parent = <&gpio0>;
57		interrupts = <RK_PB1 IRQ_TYPE_LEVEL_LOW>;
58		#clock-cells = <1>;
59		clock-output-names = "rk808-clkout1", "rk808-clkout2";
60		pinctrl-names = "default";
61		pinctrl-0 = <&pmic_int_l>;
62		rockchip,system-power-controller;
63		wakeup-source;
64
65		vcc1-supply = <&vcc5v0_sys>;
66		vcc2-supply = <&vcc5v0_sys>;
67		vcc3-supply = <&vcc5v0_sys>;
68		vcc4-supply = <&vcc5v0_sys>;
69		vcc5-supply = <&vcc_buck5>;
70		vcc6-supply = <&vcc_buck5>;
71		vcc7-supply = <&vcc5v0_sys>;
72		vcc8-supply = <&vcc3v3_sys>;
73		vcc9-supply = <&vcc5v0_sys>;
74
75		regulators {
76			vdd_npu_vepu: DCDC_REG1 {
77				regulator-name = "vdd_npu_vepu";
78				regulator-always-on;
79				regulator-boot-on;
80				regulator-initial-mode = <0x2>;
81				regulator-min-microvolt = <650000>;
82				regulator-max-microvolt = <950000>;
83				regulator-ramp-delay = <6001>;
84				regulator-state-mem {
85					regulator-off-in-suspend;
86				};
87			};
88
89			vdd_arm: DCDC_REG2 {
90				regulator-name = "vdd_arm";
91				regulator-always-on;
92				regulator-boot-on;
93				regulator-initial-mode = <0x2>;
94				regulator-min-microvolt = <725000>;
95				regulator-max-microvolt = <1350000>;
96				regulator-ramp-delay = <6001>;
97				regulator-state-mem {
98					regulator-off-in-suspend;
99				};
100			};
101
102			vcc_ddr: DCDC_REG3 {
103				regulator-name = "vcc_ddr";
104				regulator-always-on;
105				regulator-boot-on;
106				regulator-initial-mode = <0x2>;
107				regulator-state-mem {
108					regulator-on-in-suspend;
109				};
110			};
111
112			vcc3v3_sys: DCDC_REG4 {
113				regulator-name = "vcc3v3_sys";
114				regulator-always-on;
115				regulator-boot-on;
116				regulator-initial-mode = <0x2>;
117				regulator-min-microvolt = <3300000>;
118				regulator-max-microvolt = <3300000>;
119				regulator-state-mem {
120					regulator-on-in-suspend;
121					regulator-suspend-microvolt = <3300000>;
122				};
123			};
124
125			vcc_buck5: DCDC_REG5 {
126				regulator-name = "vcc_buck5";
127				regulator-always-on;
128				regulator-boot-on;
129				regulator-min-microvolt = <2200000>;
130				regulator-max-microvolt = <2200000>;
131				regulator-state-mem {
132					regulator-on-in-suspend;
133					regulator-suspend-microvolt = <2200000>;
134				};
135			};
136
137			vcc_0v8: LDO_REG1 {
138				regulator-name = "vcc_0v8";
139				regulator-always-on;
140				regulator-boot-on;
141				regulator-min-microvolt = <800000>;
142				regulator-max-microvolt = <800000>;
143				regulator-state-mem {
144					regulator-off-in-suspend;
145				};
146			};
147
148			vcc1v8_pmu: LDO_REG2 {
149				regulator-name = "vcc1v8_pmu";
150				regulator-always-on;
151				regulator-boot-on;
152				regulator-min-microvolt = <1800000>;
153				regulator-max-microvolt = <1800000>;
154				regulator-state-mem {
155					regulator-on-in-suspend;
156					regulator-suspend-microvolt = <1800000>;
157				};
158			};
159
160			vdd0v8_pmu: LDO_REG3 {
161				regulator-name = "vcc0v8_pmu";
162				regulator-always-on;
163				regulator-boot-on;
164				regulator-min-microvolt = <800000>;
165				regulator-max-microvolt = <800000>;
166				regulator-state-mem {
167					regulator-on-in-suspend;
168					regulator-suspend-microvolt = <800000>;
169				};
170			};
171
172			vcc_1v8: LDO_REG4 {
173				regulator-name = "vcc_1v8";
174				regulator-always-on;
175				regulator-boot-on;
176				regulator-min-microvolt = <1800000>;
177				regulator-max-microvolt = <1800000>;
178				regulator-state-mem {
179					regulator-on-in-suspend;
180					regulator-suspend-microvolt = <1800000>;
181				};
182			};
183
184			vcc_dovdd: LDO_REG5 {
185				regulator-name = "vcc_dovdd";
186				regulator-always-on;
187				regulator-boot-on;
188				regulator-min-microvolt = <1800000>;
189				regulator-max-microvolt = <1800000>;
190				regulator-state-mem {
191					regulator-off-in-suspend;
192				};
193			};
194
195			vcc_dvdd: LDO_REG6 {
196				regulator-name = "vcc_dvdd";
197				regulator-min-microvolt = <1200000>;
198				regulator-max-microvolt = <1200000>;
199				regulator-state-mem {
200					regulator-off-in-suspend;
201				};
202			};
203
204			vcc_avdd: LDO_REG7 {
205				regulator-name = "vcc_avdd";
206				regulator-min-microvolt = <2800000>;
207				regulator-max-microvolt = <2800000>;
208				regulator-state-mem {
209					regulator-off-in-suspend;
210				};
211			};
212
213			vccio_sd: LDO_REG8 {
214				regulator-name = "vccio_sd";
215				regulator-always-on;
216				regulator-boot-on;
217				regulator-min-microvolt = <1800000>;
218				regulator-max-microvolt = <3300000>;
219				regulator-state-mem {
220					regulator-off-in-suspend;
221				};
222			};
223
224			vcc3v3_sd: LDO_REG9 {
225				regulator-name = "vcc3v3_sd";
226				regulator-always-on;
227				regulator-boot-on;
228				regulator-min-microvolt = <3300000>;
229				regulator-max-microvolt = <3300000>;
230				regulator-state-mem {
231					regulator-off-in-suspend;
232				};
233			};
234
235			vcc_5v0: SWITCH_REG1 {
236				regulator-name = "vcc_5v0";
237			};
238
239			vcc_3v3: SWITCH_REG2 {
240				regulator-name = "vcc_3v3";
241				regulator-always-on;
242				regulator-boot-on;
243			};
244		};
245	};
246};
247
248&i2c2 {
249	status = "okay";
250	clock-frequency = <400000>;
251
252	pcf8563: rtc@51 {
253		compatible = "nxp,pcf8563";
254		reg = <0x51>;
255		#clock-cells = <0>;
256		interrupt-parent = <&gpio0>;
257		interrupts = <RK_PA2 IRQ_TYPE_LEVEL_LOW>;
258		clock-output-names = "xin32k";
259	};
260};
261
262&gmac {
263	assigned-clocks = <&cru CLK_GMAC_SRC_M1>, <&cru CLK_GMAC_SRC>,
264			  <&cru CLK_GMAC_TX_RX>;
265	assigned-clock-parents = <&cru CLK_GMAC_RGMII_M1>, <&cru CLK_GMAC_SRC_M1>,
266				 <&cru RMII_MODE_CLK>;
267	assigned-clock-rates = <0>, <50000000>;
268	clock_in_out = "output";
269	phy-handle = <&phy>;
270	phy-mode = "rmii";
271	phy-supply = <&vcc_3v3>;
272	pinctrl-names = "default";
273	pinctrl-0 = <&rgmiim1_miim &rgmiim1_rxer &rgmiim1_bus2 &rgmiim1_mclkinout>;
274	status = "okay";
275};
276
277&mdio {
278	phy: ethernet-phy@0 {
279		compatible = "ethernet-phy-ieee802.3-c22";
280		reg = <0x0>;
281		pinctrl-names = "default";
282		pinctrl-0 = <&eth_phy_rst>;
283		reset-active-low;
284		reset-assert-us = <50000>;
285		reset-deassert-us = <10000>;
286		reset-gpios = <&gpio2 RK_PA6 GPIO_ACTIVE_LOW>;
287	};
288};
289
290&pinctrl {
291	ethernet {
292		eth_phy_rst: eth-phy-rst {
293			rockchip,pins = <2 RK_PA6 RK_FUNC_GPIO &pcfg_pull_down>;
294		};
295	};
296	bt {
297		bt_enable: bt-enable {
298			rockchip,pins = <1 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
299		};
300
301		bt_wake_dev: bt-wake-dev {
302			rockchip,pins = <1 RK_PC7 RK_FUNC_GPIO &pcfg_pull_none>;
303		};
304
305		bt_wake_host: bt-wake-host {
306			rockchip,pins = <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>;
307		};
308	};
309
310	pmic {
311		pmic_int_l: pmic-int-l {
312			rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_up>;
313		};
314	};
315
316	wifi {
317		wifi_enable_h: wifi-enable-h {
318			rockchip,pins = <1 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>;
319		};
320	};
321};
322
323&pmu_io_domains {
324	pmuio0-supply = <&vcc1v8_pmu>;
325	pmuio1-supply = <&vcc3v3_sys>;
326	vccio1-supply = <&vcc_1v8>;
327	vccio2-supply = <&vccio_sd>;
328	vccio3-supply = <&vcc_1v8>;
329	vccio4-supply = <&vcc_dovdd>;
330	vccio5-supply = <&vcc_1v8>;
331	vccio6-supply = <&vcc_1v8>;
332	vccio7-supply = <&vcc_dovdd>;
333	status = "okay";
334};
335
336&saradc {
337	vref-supply = <&vcc_1v8>;
338	status = "okay";
339};
340
341&sdio {
342	bus-width = <4>;
343	cap-sd-highspeed;
344	cap-sdio-irq;
345	keep-power-in-suspend;
346	max-frequency = <100000000>;
347	mmc-pwrseq = <&sdio_pwrseq>;
348	non-removable;
349	pinctrl-names = "default";
350	pinctrl-0 = <&sdmmc1_clk &sdmmc1_cmd &sdmmc1_bus4>;
351	rockchip,default-sample-phase = <90>;
352	sd-uhs-sdr104;
353	vmmc-supply = <&vcc3v3_sys>;
354	vqmmc-supply = <&vcc_1v8>;
355	status = "okay";
356};
357
358&sdmmc {
359	bus-width = <4>;
360	cap-mmc-highspeed;
361	cap-sd-highspeed;
362	card-detect-delay = <200>;
363	pinctrl-names = "default";
364	pinctrl-0 = <&sdmmc0_clk &sdmmc0_cmd &sdmmc0_bus4 &sdmmc0_det>;
365	rockchip,default-sample-phase = <90>;
366	sd-uhs-sdr12;
367	sd-uhs-sdr25;
368	sd-uhs-sdr104;
369	vqmmc-supply = <&vccio_sd>;
370	status = "okay";
371};
372
373&uart0 {
374	pinctrl-names = "default";
375	pinctrl-0 = <&uart0_xfer &uart0_ctsn &uart0_rtsn>;
376	uart-has-rtscts;
377	status = "okay";
378
379	bluetooth {
380		compatible = "realtek,rtl8723ds-bt";
381		device-wake-gpios = <&gpio1 RK_PC7 GPIO_ACTIVE_HIGH>; /* BT_WAKE */
382		enable-gpios = <&gpio1 RK_PC6 GPIO_ACTIVE_HIGH>; /* BT_RST */
383		host-wake-gpios = <&gpio1 RK_PC5 GPIO_ACTIVE_HIGH>; /* BT_WAKE_HOST */
384		max-speed = <2000000>;
385		pinctrl-names = "default";
386		pinctrl-0 = <&bt_enable>, <&bt_wake_dev>, <&bt_wake_host>;
387	};
388};
389
390&uart2 {
391	status = "okay";
392};
393
394&uart3 {
395	pinctrl-names = "default";
396	pinctrl-0 = <&uart3m2_xfer>;
397	status = "okay";
398};
399
400&uart4 {
401	pinctrl-names = "default";
402	pinctrl-0 = <&uart4m2_xfer>;
403	status = "okay";
404};
405