xref: /illumos-gate/usr/src/uts/common/io/ptem.c (revision 566b4223c74de6cad48ddbedf35a12d6a511c8c5)
1 /*
2  * CDDL HEADER START
3  *
4  * The contents of this file are subject to the terms of the
5  * Common Development and Distribution License, Version 1.0 only
6  * (the "License").  You may not use this file except in compliance
7  * with the License.
8  *
9  * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
10  * or http://www.opensolaris.org/os/licensing.
11  * See the License for the specific language governing permissions
12  * and limitations under the License.
13  *
14  * When distributing Covered Code, include this CDDL HEADER in each
15  * file and include the License file at usr/src/OPENSOLARIS.LICENSE.
16  * If applicable, add the following below this CDDL HEADER, with the
17  * fields enclosed by brackets "[]" replaced with your own identifying
18  * information: Portions Copyright [yyyy] [name of copyright owner]
19  *
20  * CDDL HEADER END
21  */
22 /*	Copyright (c) 1984, 1986, 1987, 1988, 1989 AT&T	*/
23 /*	  All Rights Reserved  	*/
24 
25 
26 /*
27  * Copyright 2004 Sun Microsystems, Inc.  All rights reserved.
28  * Use is subject to license terms.
29  * Copyright 2018 OmniOS Community Edition (OmniOSce) Association.
30  */
31 
32 /*
33  * Description:
34  *
35  * The PTEM streams module is used as a pseudo driver emulator.  Its purpose
36  * is to emulate the ioctl() functions of a terminal device driver.
37  */
38 
39 #include <sys/types.h>
40 #include <sys/param.h>
41 #include <sys/stream.h>
42 #include <sys/stropts.h>
43 #include <sys/strsun.h>
44 #include <sys/termio.h>
45 #include <sys/pcb.h>
46 #include <sys/signal.h>
47 #include <sys/cred.h>
48 #include <sys/strtty.h>
49 #include <sys/errno.h>
50 #include <sys/cmn_err.h>
51 #include <sys/jioctl.h>
52 #include <sys/ptem.h>
53 #include <sys/ptms.h>
54 #include <sys/debug.h>
55 #include <sys/kmem.h>
56 #include <sys/ddi.h>
57 #include <sys/sunddi.h>
58 #include <sys/conf.h>
59 #include <sys/modctl.h>
60 
61 extern struct streamtab pteminfo;
62 
63 static struct fmodsw fsw = {
64 	"ptem",
65 	&pteminfo,
66 	D_MTQPAIR | D_MP | _D_SINGLE_INSTANCE
67 };
68 
69 static struct modlstrmod modlstrmod = {
70 	&mod_strmodops, "pty hardware emulator", &fsw
71 };
72 
73 static struct modlinkage modlinkage = {
74 	MODREV_1, &modlstrmod, NULL
75 };
76 
77 int
78 _init()
79 {
80 	return (mod_install(&modlinkage));
81 }
82 
83 int
84 _fini()
85 {
86 	return (mod_remove(&modlinkage));
87 }
88 
89 int
90 _info(struct modinfo *modinfop)
91 {
92 	return (mod_info(&modlinkage, modinfop));
93 }
94 
95 /*
96  * stream data structure definitions
97  */
98 static int ptemopen(queue_t *, dev_t  *, int, int, cred_t *);
99 static int ptemclose(queue_t *, int, cred_t *);
100 static void ptemrput(queue_t *, mblk_t *);
101 static void ptemwput(queue_t *, mblk_t *);
102 static void ptemwsrv(queue_t *);
103 
104 static struct module_info ptem_info = {
105 	0xabcd,
106 	"ptem",
107 	0,
108 	_TTY_BUFSIZ,
109 	_TTY_BUFSIZ,
110 	128
111 };
112 
113 static struct qinit ptemrinit = {
114 	(int (*)()) ptemrput,
115 	NULL,
116 	ptemopen,
117 	ptemclose,
118 	NULL,
119 	&ptem_info,
120 	NULL
121 };
122 
123 static struct qinit ptemwinit = {
124 	(int (*)()) ptemwput,
125 	(int (*)()) ptemwsrv,
126 	ptemopen,
127 	ptemclose,
128 	nulldev,
129 	&ptem_info,
130 	NULL
131 };
132 
133 struct streamtab pteminfo = {
134 	&ptemrinit,
135 	&ptemwinit,
136 	NULL,
137 	NULL
138 };
139 
140 static void	ptioc(queue_t *, mblk_t *, int);
141 static int	ptemwmsg(queue_t *, mblk_t *);
142 
143 /*
144  * ptemopen - open routine gets called when the module gets pushed onto the
145  * stream.
146  */
147 /* ARGSUSED */
148 static int
149 ptemopen(
150 	queue_t    *q,		/* pointer to the read side queue */
151 	dev_t   *devp,		/* pointer to stream tail's dev */
152 	int	oflag,		/* the user open(2) supplied flags */
153 	int	sflag,		/* open state flag */
154 	cred_t *credp)		/* credentials */
155 {
156 	struct ptem *ntp;	/* ptem entry for this PTEM module */
157 	mblk_t *mop;		/* an setopts mblk */
158 	struct stroptions *sop;
159 	struct termios *termiosp;
160 	int len;
161 
162 	if (sflag != MODOPEN)
163 		return (EINVAL);
164 
165 	if (q->q_ptr != NULL) {
166 		/* It's already attached. */
167 		return (0);
168 	}
169 
170 	/*
171 	 * Allocate state structure.
172 	 */
173 	ntp = kmem_alloc(sizeof (*ntp), KM_SLEEP);
174 
175 	/*
176 	 * Allocate a message block, used to pass the zero length message for
177 	 * "stty 0".
178 	 *
179 	 * NOTE: it's better to find out if such a message block can be
180 	 *	 allocated before it's needed than to not be able to
181 	 *	 deliver (for possible lack of buffers) when a hang-up
182 	 *	 occurs.
183 	 */
184 	if ((ntp->dack_ptr = allocb(4, BPRI_MED)) == NULL) {
185 		kmem_free(ntp, sizeof (*ntp));
186 		return (EAGAIN);
187 	}
188 
189 	/*
190 	 * Initialize an M_SETOPTS message to set up hi/lo water marks on
191 	 * stream head read queue and add controlling tty if not set.
192 	 */
193 	mop = allocb(sizeof (struct stroptions), BPRI_MED);
194 	if (mop == NULL) {
195 		freemsg(ntp->dack_ptr);
196 		kmem_free(ntp, sizeof (*ntp));
197 		return (EAGAIN);
198 	}
199 	mop->b_datap->db_type = M_SETOPTS;
200 	mop->b_wptr += sizeof (struct stroptions);
201 	sop = (struct stroptions *)mop->b_rptr;
202 	sop->so_flags = SO_HIWAT | SO_LOWAT | SO_ISTTY;
203 	sop->so_hiwat = _TTY_BUFSIZ;
204 	sop->so_lowat = 256;
205 
206 	/*
207 	 * Cross-link.
208 	 */
209 	ntp->q_ptr = q;
210 	q->q_ptr = ntp;
211 	WR(q)->q_ptr = ntp;
212 
213 	/*
214 	 * Get termios defaults.  These are stored as
215 	 * a property in the "options" node.
216 	 */
217 	if (ddi_getlongprop(DDI_DEV_T_ANY, ddi_root_node(), 0, "ttymodes",
218 	    (caddr_t)&termiosp, &len) == DDI_PROP_SUCCESS &&
219 	    len == sizeof (struct termios)) {
220 
221 		ntp->cflags = termiosp->c_cflag;
222 		kmem_free(termiosp, len);
223 	} else {
224 		/*
225 		 * Gack!  Whine about it.
226 		 */
227 		cmn_err(CE_WARN, "ptem: Couldn't get ttymodes property!");
228 	}
229 	ntp->wsz.ws_row = 0;
230 	ntp->wsz.ws_col = 0;
231 	ntp->wsz.ws_xpixel = 0;
232 	ntp->wsz.ws_ypixel = 0;
233 
234 	ntp->state = 0;
235 
236 	/*
237 	 * Commit to the open and send the M_SETOPTS off to the stream head.
238 	 */
239 	qprocson(q);
240 	putnext(q, mop);
241 
242 	return (0);
243 }
244 
245 
246 /*
247  * ptemclose - This routine gets called when the module gets popped off of the
248  * stream.
249  */
250 /* ARGSUSED */
251 static int
252 ptemclose(queue_t *q, int flag, cred_t *credp)
253 {
254 	struct ptem *ntp;	/* ptem entry for this PTEM module */
255 
256 	qprocsoff(q);
257 	ntp = (struct ptem *)q->q_ptr;
258 	freemsg(ntp->dack_ptr);
259 	kmem_free(ntp, sizeof (*ntp));
260 	q->q_ptr = WR(q)->q_ptr = NULL;
261 	return (0);
262 }
263 
264 
265 /*
266  * ptemrput - Module read queue put procedure.
267  *
268  * This is called from the module or driver downstream.
269  */
270 static void
271 ptemrput(queue_t *q, mblk_t *mp)
272 {
273 	struct iocblk *iocp;	/* M_IOCTL data */
274 	struct copyresp *resp;	/* transparent ioctl response struct */
275 	int error;
276 
277 	switch (mp->b_datap->db_type) {
278 	case M_DELAY:
279 	case M_READ:
280 		freemsg(mp);
281 		break;
282 
283 	case M_IOCTL:
284 		iocp = (struct iocblk *)mp->b_rptr;
285 
286 		switch (iocp->ioc_cmd) {
287 		case TCSBRK:
288 			/*
289 			 * Send a break message upstream.
290 			 *
291 			 * XXX:	Shouldn't the argument come into play in
292 			 *	determining whether or not so send an M_BREAK?
293 			 *	It certainly does in the write-side direction.
294 			 */
295 			error = miocpullup(mp, sizeof (int));
296 			if (error != 0) {
297 				miocnak(q, mp, 0, error);
298 				break;
299 			}
300 			if (!(*(int *)mp->b_cont->b_rptr)) {
301 				if (!putnextctl(q, M_BREAK)) {
302 					/*
303 					 * Send an NAK reply back
304 					 */
305 					miocnak(q, mp, 0, EAGAIN);
306 					break;
307 				}
308 			}
309 			/*
310 			 * ACK it.
311 			 */
312 			mioc2ack(mp, NULL, 0, 0);
313 			qreply(q, mp);
314 			break;
315 
316 		case JWINSIZE:
317 		case TIOCGWINSZ:
318 		case TIOCSWINSZ:
319 			ptioc(q, mp, RDSIDE);
320 			break;
321 
322 		case TIOCSIGNAL:
323 			/*
324 			 * The following subtle logic is due to the fact that
325 			 * `mp' may be in any one of three distinct formats:
326 			 *
327 			 *	1. A transparent M_IOCTL with an intptr_t-sized
328 			 *	   payload containing the signal number.
329 			 *
330 			 *	2. An I_STR M_IOCTL with an int-sized payload
331 			 *	   containing the signal number.
332 			 *
333 			 *	3. An M_IOCDATA with an int-sized payload
334 			 *	   containing the signal number.
335 			 */
336 			if (iocp->ioc_count == TRANSPARENT) {
337 				intptr_t sig = *(intptr_t *)mp->b_cont->b_rptr;
338 
339 				if (sig < 1 || sig >= NSIG) {
340 					/*
341 					 * it's transparent with pointer
342 					 * to the arg
343 					 */
344 					mcopyin(mp, NULL, sizeof (int), NULL);
345 					qreply(q, mp);
346 					break;
347 				}
348 			}
349 			ptioc(q, mp, RDSIDE);
350 			break;
351 
352 		case TIOCREMOTE:
353 			if (iocp->ioc_count != TRANSPARENT)
354 				ptioc(q, mp, RDSIDE);
355 			else {
356 				mcopyin(mp, NULL, sizeof (int), NULL);
357 				qreply(q, mp);
358 			}
359 			break;
360 
361 		default:
362 			putnext(q, mp);
363 			break;
364 		}
365 		break;
366 
367 	case M_IOCDATA:
368 		resp = (struct copyresp *)mp->b_rptr;
369 		if (resp->cp_rval) {
370 			/*
371 			 * Just free message on failure.
372 			 */
373 			freemsg(mp);
374 			break;
375 		}
376 
377 		/*
378 		 * Only need to copy data for the SET case.
379 		 */
380 		switch (resp->cp_cmd) {
381 
382 		case TIOCSWINSZ:
383 		case TIOCSIGNAL:
384 		case TIOCREMOTE:
385 			ptioc(q, mp, RDSIDE);
386 			break;
387 
388 		case JWINSIZE:
389 		case TIOCGWINSZ:
390 			mp->b_datap->db_type = M_IOCACK;
391 			mioc2ack(mp, NULL, 0, 0);
392 			qreply(q, mp);
393 			break;
394 
395 		default:
396 			freemsg(mp);
397 			break;
398 	}
399 	break;
400 
401 	case M_IOCACK:
402 	case M_IOCNAK:
403 		/*
404 		 * We only pass write-side ioctls through to the master that
405 		 * we've already ACKed or NAKed to the stream head.  Thus, we
406 		 * discard ones arriving from below, since they're redundant
407 		 * from the point of view of modules above us.
408 		 */
409 		freemsg(mp);
410 		break;
411 
412 	case M_HANGUP:
413 		/*
414 		 * clear blocked state.
415 		 */
416 		{
417 			struct ptem *ntp = (struct ptem *)q->q_ptr;
418 			if (ntp->state & OFLOW_CTL) {
419 				ntp->state &= ~OFLOW_CTL;
420 				qenable(WR(q));
421 			}
422 		}
423 		/* FALLTHROUGH */
424 	default:
425 		putnext(q, mp);
426 		break;
427 	}
428 }
429 
430 
431 /*
432  * ptemwput - Module write queue put procedure.
433  *
434  * This is called from the module or stream head upstream.
435  *
436  * XXX:	This routine is quite lazy about handling allocation failures,
437  *	basically just giving up and reporting failure.  It really ought to
438  *	set up bufcalls and only fail when it's absolutely necessary.
439  */
440 static void
441 ptemwput(queue_t *q, mblk_t *mp)
442 {
443 	struct ptem *ntp = (struct ptem *)q->q_ptr;
444 	struct iocblk *iocp;	/* outgoing ioctl structure */
445 	struct copyresp *resp;
446 	unsigned char type = mp->b_datap->db_type;
447 
448 	if (type >= QPCTL) {
449 		switch (type) {
450 
451 		case M_IOCDATA:
452 			resp = (struct copyresp *)mp->b_rptr;
453 			if (resp->cp_rval) {
454 				/*
455 				 * Just free message on failure.
456 				 */
457 				freemsg(mp);
458 				break;
459 			}
460 
461 			/*
462 			 * Only need to copy data for the SET case.
463 			 */
464 			switch (resp->cp_cmd) {
465 
466 				case TIOCSWINSZ:
467 					ptioc(q, mp, WRSIDE);
468 					break;
469 
470 				case JWINSIZE:
471 				case TIOCGWINSZ:
472 					mioc2ack(mp, NULL, 0, 0);
473 					qreply(q, mp);
474 					break;
475 
476 				default:
477 					freemsg(mp);
478 			}
479 			break;
480 
481 		case M_FLUSH:
482 			if (*mp->b_rptr & FLUSHW) {
483 				if ((ntp->state & IS_PTSTTY) &&
484 				    (*mp->b_rptr & FLUSHBAND))
485 					flushband(q, *(mp->b_rptr + 1),
486 					    FLUSHDATA);
487 				else
488 					flushq(q, FLUSHDATA);
489 			}
490 			putnext(q, mp);
491 			break;
492 
493 		case M_READ:
494 			freemsg(mp);
495 			break;
496 
497 		case M_STOP:
498 			/*
499 			 * Set the output flow control state.
500 			 */
501 			ntp->state |= OFLOW_CTL;
502 			putnext(q, mp);
503 			break;
504 
505 		case M_START:
506 			/*
507 			 * Relieve the output flow control state.
508 			 */
509 			ntp->state &= ~OFLOW_CTL;
510 			putnext(q, mp);
511 			qenable(q);
512 			break;
513 		default:
514 			putnext(q, mp);
515 			break;
516 		}
517 		return;
518 	}
519 	/*
520 	 * If our queue is nonempty or flow control persists
521 	 * downstream or module in stopped state, queue this message.
522 	 */
523 	if (q->q_first != NULL || !bcanputnext(q, mp->b_band)) {
524 		/*
525 		 * Exception: ioctls, except for those defined to
526 		 * take effect after output has drained, should be
527 		 * processed immediately.
528 		 */
529 		switch (type) {
530 
531 		case M_IOCTL:
532 			iocp = (struct iocblk *)mp->b_rptr;
533 			switch (iocp->ioc_cmd) {
534 			/*
535 			 * Queue these.
536 			 */
537 			case TCSETSW:
538 			case TCSETSF:
539 			case TCSETAW:
540 			case TCSETAF:
541 			case TCSBRK:
542 				break;
543 
544 			/*
545 			 * Handle all others immediately.
546 			 */
547 			default:
548 				(void) ptemwmsg(q, mp);
549 				return;
550 			}
551 			break;
552 
553 		case M_DELAY: /* tty delays not supported */
554 			freemsg(mp);
555 			return;
556 
557 		case M_DATA:
558 			if ((mp->b_wptr - mp->b_rptr) < 0) {
559 				/*
560 				 * Free all bad length messages.
561 				 */
562 				freemsg(mp);
563 				return;
564 			} else if ((mp->b_wptr - mp->b_rptr) == 0) {
565 				if (!(ntp->state & IS_PTSTTY)) {
566 					freemsg(mp);
567 					return;
568 				}
569 			}
570 		}
571 		(void) putq(q, mp);
572 		return;
573 	}
574 	/*
575 	 * fast path into ptemwmsg to dispose of mp.
576 	 */
577 	if (!ptemwmsg(q, mp))
578 		(void) putq(q, mp);
579 }
580 
581 /*
582  * ptem write queue service procedure.
583  */
584 static void
585 ptemwsrv(queue_t *q)
586 {
587 	mblk_t *mp;
588 
589 	while ((mp = getq(q)) != NULL) {
590 		if (!bcanputnext(q, mp->b_band) || !ptemwmsg(q, mp)) {
591 			(void) putbq(q, mp);
592 			break;
593 		}
594 	}
595 }
596 
597 
598 /*
599  * This routine is called from both ptemwput and ptemwsrv to do the
600  * actual work of dealing with mp.  ptmewput will have already
601  * dealt with high priority messages.
602  *
603  * Return 1 if the message was processed completely and 0 if not.
604  */
605 static int
606 ptemwmsg(queue_t *q, mblk_t *mp)
607 {
608 	struct ptem *ntp = (struct ptem *)q->q_ptr;
609 	struct iocblk *iocp;	/* outgoing ioctl structure */
610 	struct termio *termiop;
611 	struct termios *termiosp;
612 	mblk_t *dack_ptr;		/* disconnect message ACK block */
613 	mblk_t *pckt_msgp;		/* message sent to the PCKT module */
614 	mblk_t *dp;			/* ioctl reply data */
615 	tcflag_t cflags;
616 	int error;
617 
618 	switch (mp->b_datap->db_type) {
619 
620 	case M_IOCTL:
621 		/*
622 		 * Note:  for each "set" type operation a copy
623 		 * of the M_IOCTL message is made and passed
624 		 * downstream.  Eventually the PCKT module, if
625 		 * it has been pushed, should pick up this message.
626 		 * If the PCKT module has not been pushed the master
627 		 * side stream head will free it.
628 		 */
629 		iocp = (struct iocblk *)mp->b_rptr;
630 		switch (iocp->ioc_cmd) {
631 
632 		case TCSETAF:
633 		case TCSETSF:
634 			/*
635 			 * Flush the read queue.
636 			 */
637 			if (putnextctl1(q, M_FLUSH, FLUSHR) == 0) {
638 				miocnak(q, mp, 0, EAGAIN);
639 				break;
640 			}
641 			/* FALLTHROUGH */
642 
643 		case TCSETA:
644 		case TCSETAW:
645 		case TCSETS:
646 		case TCSETSW:
647 
648 			switch (iocp->ioc_cmd) {
649 			case TCSETAF:
650 			case TCSETA:
651 			case TCSETAW:
652 				error = miocpullup(mp, sizeof (struct termio));
653 				if (error != 0) {
654 					miocnak(q, mp, 0, error);
655 					goto out;
656 				}
657 				cflags = ((struct termio *)
658 				    mp->b_cont->b_rptr)->c_cflag;
659 				ntp->cflags =
660 				    (ntp->cflags & 0xffff0000 | cflags);
661 				break;
662 
663 			case TCSETSF:
664 			case TCSETS:
665 			case TCSETSW:
666 				error = miocpullup(mp, sizeof (struct termios));
667 				if (error != 0) {
668 					miocnak(q, mp, 0, error);
669 					goto out;
670 				}
671 				cflags = ((struct termios *)
672 				    mp->b_cont->b_rptr)->c_cflag;
673 				ntp->cflags = cflags;
674 				break;
675 			}
676 
677 			if ((cflags & CBAUD) == B0) {
678 				/*
679 				 * Hang-up: Send a zero length message.
680 				 */
681 				dack_ptr = ntp->dack_ptr;
682 
683 				if (dack_ptr) {
684 					ntp->dack_ptr = NULL;
685 					/*
686 					 * Send a zero length message
687 					 * downstream.
688 					 */
689 					putnext(q, dack_ptr);
690 				}
691 			} else {
692 				/*
693 				 * Make a copy of this message and pass it on
694 				 * to the PCKT module.
695 				 */
696 				if ((pckt_msgp = copymsg(mp)) == NULL) {
697 					miocnak(q, mp, 0, EAGAIN);
698 					break;
699 				}
700 				putnext(q, pckt_msgp);
701 			}
702 			/*
703 			 * Send ACK upstream.
704 			 */
705 			mioc2ack(mp, NULL, 0, 0);
706 			qreply(q, mp);
707 out:
708 			break;
709 
710 		case TCGETA:
711 			dp = allocb(sizeof (struct termio), BPRI_MED);
712 			if (dp == NULL) {
713 				miocnak(q, mp, 0, EAGAIN);
714 				break;
715 			}
716 			termiop = (struct termio *)dp->b_rptr;
717 			termiop->c_cflag = (ushort_t)ntp->cflags;
718 			mioc2ack(mp, dp, sizeof (struct termio), 0);
719 			qreply(q, mp);
720 			break;
721 
722 		case TCGETS:
723 			dp = allocb(sizeof (struct termios), BPRI_MED);
724 			if (dp == NULL) {
725 				miocnak(q, mp, 0, EAGAIN);
726 				break;
727 			}
728 			termiosp = (struct termios *)dp->b_rptr;
729 			termiosp->c_cflag = ntp->cflags;
730 			mioc2ack(mp, dp, sizeof (struct termios), 0);
731 			qreply(q, mp);
732 			break;
733 
734 		case TCSBRK:
735 			error = miocpullup(mp, sizeof (int));
736 			if (error != 0) {
737 				miocnak(q, mp, 0, error);
738 				break;
739 			}
740 
741 			/*
742 			 * Need a copy of this message to pass it on to
743 			 * the PCKT module.
744 			 */
745 			if ((pckt_msgp = copymsg(mp)) == NULL) {
746 				miocnak(q, mp, 0, EAGAIN);
747 				break;
748 			}
749 			/*
750 			 * Send a copy of the M_IOCTL to the PCKT module.
751 			 */
752 			putnext(q, pckt_msgp);
753 
754 			/*
755 			 * TCSBRK meaningful if data part of message is 0
756 			 * cf. termio(7).
757 			 */
758 			if (!(*(int *)mp->b_cont->b_rptr))
759 				(void) putnextctl(q, M_BREAK);
760 			/*
761 			 * ACK the ioctl.
762 			 */
763 			mioc2ack(mp, NULL, 0, 0);
764 			qreply(q, mp);
765 			break;
766 
767 		case JWINSIZE:
768 		case TIOCGWINSZ:
769 		case TIOCSWINSZ:
770 			ptioc(q, mp, WRSIDE);
771 			break;
772 
773 		case TIOCSTI:
774 			/*
775 			 * Simulate typing of a character at the terminal.  In
776 			 * all cases, we acknowledge the ioctl and pass a copy
777 			 * of it along for the PCKT module to encapsulate.  If
778 			 * not in remote mode, we also process the ioctl
779 			 * itself, looping the character given as its argument
780 			 * back around to the read side.
781 			 */
782 
783 			/*
784 			 * Need a copy of this message to pass on to the PCKT
785 			 * module.
786 			 */
787 			if ((pckt_msgp = copymsg(mp)) == NULL) {
788 				miocnak(q, mp, 0, EAGAIN);
789 				break;
790 			}
791 			if ((ntp->state & REMOTEMODE) == 0) {
792 				mblk_t *bp;
793 
794 				error = miocpullup(mp, sizeof (char));
795 				if (error != 0) {
796 					freemsg(pckt_msgp);
797 					miocnak(q, mp, 0, error);
798 					break;
799 				}
800 
801 				/*
802 				 * The permission checking has already been
803 				 * done at the stream head, since it has to be
804 				 * done in the context of the process doing
805 				 * the call.
806 				 */
807 				if ((bp = allocb(1, BPRI_MED)) == NULL) {
808 					freemsg(pckt_msgp);
809 					miocnak(q, mp, 0, EAGAIN);
810 					break;
811 				}
812 				/*
813 				 * XXX:	Is EAGAIN really the right response to
814 				 *	flow control blockage?
815 				 */
816 				if (!bcanputnext(RD(q), mp->b_band)) {
817 					freemsg(bp);
818 					freemsg(pckt_msgp);
819 					miocnak(q, mp, 0, EAGAIN);
820 					break;
821 				}
822 				*bp->b_wptr++ = *mp->b_cont->b_rptr;
823 				qreply(q, bp);
824 			}
825 
826 			putnext(q, pckt_msgp);
827 			mioc2ack(mp, NULL, 0, 0);
828 			qreply(q, mp);
829 			break;
830 
831 		case PTSSTTY:
832 			if (ntp->state & IS_PTSTTY) {
833 				miocnak(q, mp, 0, EEXIST);
834 			} else {
835 				ntp->state |= IS_PTSTTY;
836 				mioc2ack(mp, NULL, 0, 0);
837 				qreply(q, mp);
838 			}
839 			break;
840 
841 		default:
842 			/*
843 			 * End of the line.  The slave driver doesn't see any
844 			 * ioctls that we don't explicitly pass along to it.
845 			 */
846 			miocnak(q, mp, 0, EINVAL);
847 			break;
848 		}
849 		break;
850 
851 	case M_DELAY: /* tty delays not supported */
852 		freemsg(mp);
853 		break;
854 
855 	case M_DATA:
856 		if ((mp->b_wptr - mp->b_rptr) < 0) {
857 			/*
858 			 * Free all bad length messages.
859 			 */
860 			freemsg(mp);
861 			break;
862 		} else if ((mp->b_wptr - mp->b_rptr) == 0) {
863 			if (!(ntp->state & IS_PTSTTY)) {
864 				freemsg(mp);
865 				break;
866 			}
867 		}
868 		if (ntp->state & OFLOW_CTL)
869 			return (0);
870 		/* FALLTHROUGH */
871 
872 	default:
873 		putnext(q, mp);
874 		break;
875 
876 	}
877 
878 	return (1);
879 }
880 
881 /*
882  * Message must be of type M_IOCTL or M_IOCDATA for this routine to be called.
883  */
884 static void
885 ptioc(queue_t *q, mblk_t *mp, int qside)
886 {
887 	struct ptem *tp;
888 	struct iocblk *iocp;
889 	struct winsize *wb;
890 	struct jwinsize *jwb;
891 	mblk_t *tmp;
892 	mblk_t *pckt_msgp;	/* message sent to the PCKT module */
893 	int error;
894 
895 	iocp = (struct iocblk *)mp->b_rptr;
896 	tp = (struct ptem *)q->q_ptr;
897 
898 	switch (iocp->ioc_cmd) {
899 
900 	case JWINSIZE:
901 		/*
902 		 * For compatibility:  If all zeros, NAK the message for dumb
903 		 * terminals.
904 		 */
905 		if ((tp->wsz.ws_row == 0) && (tp->wsz.ws_col == 0) &&
906 		    (tp->wsz.ws_xpixel == 0) && (tp->wsz.ws_ypixel == 0)) {
907 			miocnak(q, mp, 0, EINVAL);
908 			return;
909 		}
910 
911 		tmp = allocb(sizeof (struct jwinsize), BPRI_MED);
912 		if (tmp == NULL) {
913 			miocnak(q, mp, 0, EAGAIN);
914 			return;
915 		}
916 
917 		if (iocp->ioc_count == TRANSPARENT)
918 			mcopyout(mp, NULL, sizeof (struct jwinsize), NULL, tmp);
919 		else
920 			mioc2ack(mp, tmp, sizeof (struct jwinsize), 0);
921 
922 		jwb = (struct jwinsize *)mp->b_cont->b_rptr;
923 		jwb->bytesx = tp->wsz.ws_col;
924 		jwb->bytesy = tp->wsz.ws_row;
925 		jwb->bitsx = tp->wsz.ws_xpixel;
926 		jwb->bitsy = tp->wsz.ws_ypixel;
927 
928 		qreply(q, mp);
929 		return;
930 
931 	case TIOCGWINSZ:
932 		/*
933 		 * If all zeros NAK the message for dumb terminals.
934 		 */
935 		if ((tp->wsz.ws_row == 0) && (tp->wsz.ws_col == 0) &&
936 		    (tp->wsz.ws_xpixel == 0) && (tp->wsz.ws_ypixel == 0)) {
937 			miocnak(q, mp, 0, EINVAL);
938 			return;
939 		}
940 
941 		tmp = allocb(sizeof (struct winsize), BPRI_MED);
942 		if (tmp == NULL) {
943 			miocnak(q, mp, 0, EAGAIN);
944 			return;
945 		}
946 
947 		mioc2ack(mp, tmp, sizeof (struct winsize), 0);
948 
949 		wb = (struct winsize *)mp->b_cont->b_rptr;
950 		wb->ws_row = tp->wsz.ws_row;
951 		wb->ws_col = tp->wsz.ws_col;
952 		wb->ws_xpixel = tp->wsz.ws_xpixel;
953 		wb->ws_ypixel = tp->wsz.ws_ypixel;
954 
955 		qreply(q, mp);
956 		return;
957 
958 	case TIOCSWINSZ:
959 		error = miocpullup(mp, sizeof (struct winsize));
960 		if (error != 0) {
961 			miocnak(q, mp, 0, error);
962 			return;
963 		}
964 
965 		wb = (struct winsize *)mp->b_cont->b_rptr;
966 		/*
967 		 * Send a SIGWINCH signal if the row/col information has
968 		 * changed.
969 		 */
970 		if ((tp->wsz.ws_row != wb->ws_row) ||
971 		    (tp->wsz.ws_col != wb->ws_col) ||
972 		    (tp->wsz.ws_xpixel != wb->ws_xpixel) ||
973 		    (tp->wsz.ws_ypixel != wb->ws_xpixel)) {
974 			/*
975 			 * SIGWINCH is always sent upstream.
976 			 */
977 			if (qside == WRSIDE)
978 				(void) putnextctl1(RD(q), M_SIG, SIGWINCH);
979 			else if (qside == RDSIDE)
980 				(void) putnextctl1(q, M_SIG, SIGWINCH);
981 			/*
982 			 * Message may have come in as an M_IOCDATA; pass it
983 			 * to the master side as an M_IOCTL.
984 			 */
985 			mp->b_datap->db_type = M_IOCTL;
986 			if (qside == WRSIDE) {
987 				/*
988 				 * Need a copy of this message to pass on to
989 				 * the PCKT module, only if the M_IOCTL
990 				 * orginated from the slave side.
991 				 */
992 				if ((pckt_msgp = copymsg(mp)) == NULL) {
993 					miocnak(q, mp, 0, EAGAIN);
994 					return;
995 				}
996 				putnext(q, pckt_msgp);
997 			}
998 			tp->wsz.ws_row = wb->ws_row;
999 			tp->wsz.ws_col = wb->ws_col;
1000 			tp->wsz.ws_xpixel = wb->ws_xpixel;
1001 			tp->wsz.ws_ypixel = wb->ws_ypixel;
1002 		}
1003 
1004 		mioc2ack(mp, NULL, 0, 0);
1005 		qreply(q, mp);
1006 		return;
1007 
1008 	case TIOCSIGNAL: {
1009 		/*
1010 		 * This ioctl can emanate from the master side in remote
1011 		 * mode only.
1012 		 */
1013 		int	sig;
1014 
1015 		if (DB_TYPE(mp) == M_IOCTL && iocp->ioc_count != TRANSPARENT) {
1016 			error = miocpullup(mp, sizeof (int));
1017 			if (error != 0) {
1018 				miocnak(q, mp, 0, error);
1019 				return;
1020 			}
1021 		}
1022 
1023 		if (DB_TYPE(mp) == M_IOCDATA || iocp->ioc_count != TRANSPARENT)
1024 			sig = *(int *)mp->b_cont->b_rptr;
1025 		else
1026 			sig = (int)*(intptr_t *)mp->b_cont->b_rptr;
1027 
1028 		if (sig < 1 || sig >= NSIG) {
1029 			miocnak(q, mp, 0, EINVAL);
1030 			return;
1031 		}
1032 
1033 		/*
1034 		 * Send an M_PCSIG message up the slave's read side and
1035 		 * respond back to the master with an ACK or NAK as
1036 		 * appropriate.
1037 		 */
1038 		if (putnextctl1(q, M_PCSIG, sig) == 0) {
1039 			miocnak(q, mp, 0, EAGAIN);
1040 			return;
1041 		}
1042 
1043 		mioc2ack(mp, NULL, 0, 0);
1044 		qreply(q, mp);
1045 		return;
1046 	}
1047 
1048 	case TIOCREMOTE: {
1049 		int	onoff;
1050 		mblk_t	*mctlp;
1051 
1052 		if (DB_TYPE(mp) == M_IOCTL) {
1053 			error = miocpullup(mp, sizeof (int));
1054 			if (error != 0) {
1055 				miocnak(q, mp, 0, error);
1056 				return;
1057 			}
1058 		}
1059 
1060 		onoff = *(int *)mp->b_cont->b_rptr;
1061 
1062 		/*
1063 		 * Send M_CTL up using the iocblk format.
1064 		 */
1065 		mctlp = mkiocb(onoff ? MC_NO_CANON : MC_DO_CANON);
1066 		if (mctlp == NULL) {
1067 			miocnak(q, mp, 0, EAGAIN);
1068 			return;
1069 		}
1070 		mctlp->b_datap->db_type = M_CTL;
1071 		putnext(q, mctlp);
1072 
1073 		/*
1074 		 * ACK the ioctl.
1075 		 */
1076 		mioc2ack(mp, NULL, 0, 0);
1077 		qreply(q, mp);
1078 
1079 		/*
1080 		 * Record state change.
1081 		 */
1082 		if (onoff)
1083 			tp->state |= REMOTEMODE;
1084 		else
1085 			tp->state &= ~REMOTEMODE;
1086 		return;
1087 	}
1088 
1089 	default:
1090 		putnext(q, mp);
1091 		return;
1092 	}
1093 }
1094