1 /****************************************************************************** 2 3 Copyright (c) 2001-2012, Intel Corporation 4 All rights reserved. 5 6 Redistribution and use in source and binary forms, with or without 7 modification, are permitted provided that the following conditions are met: 8 9 1. Redistributions of source code must retain the above copyright notice, 10 this list of conditions and the following disclaimer. 11 12 2. Redistributions in binary form must reproduce the above copyright 13 notice, this list of conditions and the following disclaimer in the 14 documentation and/or other materials provided with the distribution. 15 16 3. Neither the name of the Intel Corporation nor the names of its 17 contributors may be used to endorse or promote products derived from 18 this software without specific prior written permission. 19 20 THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" 21 AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 22 IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 23 ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE 24 LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 25 CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 26 SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 27 INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 28 CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 29 ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 30 POSSIBILITY OF SUCH DAMAGE. 31 32 ******************************************************************************/ 33 /*$FreeBSD: src/sys/dev/ixgbe/ixgbe_82598.c,v 1.13 2012/07/05 20:51:44 jfv Exp $*/ 34 35 #include "ixgbe_type.h" 36 #include "ixgbe_82598.h" 37 #include "ixgbe_api.h" 38 #include "ixgbe_common.h" 39 #include "ixgbe_phy.h" 40 41 static s32 ixgbe_get_link_capabilities_82598(struct ixgbe_hw *hw, 42 ixgbe_link_speed *speed, 43 bool *autoneg); 44 static enum ixgbe_media_type ixgbe_get_media_type_82598(struct ixgbe_hw *hw); 45 static s32 ixgbe_start_mac_link_82598(struct ixgbe_hw *hw, 46 bool autoneg_wait_to_complete); 47 static s32 ixgbe_check_mac_link_82598(struct ixgbe_hw *hw, 48 ixgbe_link_speed *speed, bool *link_up, 49 bool link_up_wait_to_complete); 50 static s32 ixgbe_setup_mac_link_82598(struct ixgbe_hw *hw, 51 ixgbe_link_speed speed, 52 bool autoneg, 53 bool autoneg_wait_to_complete); 54 static s32 ixgbe_setup_copper_link_82598(struct ixgbe_hw *hw, 55 ixgbe_link_speed speed, 56 bool autoneg, 57 bool autoneg_wait_to_complete); 58 static s32 ixgbe_reset_hw_82598(struct ixgbe_hw *hw); 59 static s32 ixgbe_clear_vmdq_82598(struct ixgbe_hw *hw, u32 rar, u32 vmdq); 60 static s32 ixgbe_clear_vfta_82598(struct ixgbe_hw *hw); 61 static void ixgbe_set_rxpba_82598(struct ixgbe_hw *hw, int num_pb, 62 u32 headroom, int strategy); 63 64 /** 65 * ixgbe_set_pcie_completion_timeout - set pci-e completion timeout 66 * @hw: pointer to the HW structure 67 * 68 * The defaults for 82598 should be in the range of 50us to 50ms, 69 * however the hardware default for these parts is 500us to 1ms which is less 70 * than the 10ms recommended by the pci-e spec. To address this we need to 71 * increase the value to either 10ms to 250ms for capability version 1 config, 72 * or 16ms to 55ms for version 2. 73 **/ 74 void ixgbe_set_pcie_completion_timeout(struct ixgbe_hw *hw) 75 { 76 u32 gcr = IXGBE_READ_REG(hw, IXGBE_GCR); 77 u16 pcie_devctl2; 78 79 /* only take action if timeout value is defaulted to 0 */ 80 if (gcr & IXGBE_GCR_CMPL_TMOUT_MASK) 81 goto out; 82 83 /* 84 * if capababilities version is type 1 we can write the 85 * timeout of 10ms to 250ms through the GCR register 86 */ 87 if (!(gcr & IXGBE_GCR_CAP_VER2)) { 88 gcr |= IXGBE_GCR_CMPL_TMOUT_10ms; 89 goto out; 90 } 91 92 /* 93 * for version 2 capabilities we need to write the config space 94 * directly in order to set the completion timeout value for 95 * 16ms to 55ms 96 */ 97 pcie_devctl2 = IXGBE_READ_PCIE_WORD(hw, IXGBE_PCI_DEVICE_CONTROL2); 98 pcie_devctl2 |= IXGBE_PCI_DEVICE_CONTROL2_16ms; 99 IXGBE_WRITE_PCIE_WORD(hw, IXGBE_PCI_DEVICE_CONTROL2, pcie_devctl2); 100 out: 101 /* disable completion timeout resend */ 102 gcr &= ~IXGBE_GCR_CMPL_TMOUT_RESEND; 103 IXGBE_WRITE_REG(hw, IXGBE_GCR, gcr); 104 } 105 106 /** 107 * ixgbe_init_ops_82598 - Inits func ptrs and MAC type 108 * @hw: pointer to hardware structure 109 * 110 * Initialize the function pointers and assign the MAC type for 82598. 111 * Does not touch the hardware. 112 **/ 113 s32 ixgbe_init_ops_82598(struct ixgbe_hw *hw) 114 { 115 struct ixgbe_mac_info *mac = &hw->mac; 116 struct ixgbe_phy_info *phy = &hw->phy; 117 s32 ret_val; 118 119 DEBUGFUNC("ixgbe_init_ops_82598"); 120 121 ret_val = ixgbe_init_phy_ops_generic(hw); 122 ret_val = ixgbe_init_ops_generic(hw); 123 124 /* PHY */ 125 phy->ops.init = &ixgbe_init_phy_ops_82598; 126 127 /* MAC */ 128 mac->ops.start_hw = &ixgbe_start_hw_82598; 129 mac->ops.enable_relaxed_ordering = &ixgbe_enable_relaxed_ordering_82598; 130 mac->ops.reset_hw = &ixgbe_reset_hw_82598; 131 mac->ops.get_media_type = &ixgbe_get_media_type_82598; 132 mac->ops.get_supported_physical_layer = 133 &ixgbe_get_supported_physical_layer_82598; 134 mac->ops.read_analog_reg8 = &ixgbe_read_analog_reg8_82598; 135 mac->ops.write_analog_reg8 = &ixgbe_write_analog_reg8_82598; 136 mac->ops.set_lan_id = &ixgbe_set_lan_id_multi_port_pcie_82598; 137 138 /* RAR, Multicast, VLAN */ 139 mac->ops.set_vmdq = &ixgbe_set_vmdq_82598; 140 mac->ops.clear_vmdq = &ixgbe_clear_vmdq_82598; 141 mac->ops.set_vfta = &ixgbe_set_vfta_82598; 142 mac->ops.set_vlvf = NULL; 143 mac->ops.clear_vfta = &ixgbe_clear_vfta_82598; 144 145 /* Flow Control */ 146 mac->ops.fc_enable = &ixgbe_fc_enable_82598; 147 148 mac->mcft_size = 128; 149 mac->vft_size = 128; 150 mac->num_rar_entries = 16; 151 mac->rx_pb_size = 512; 152 mac->max_tx_queues = 32; 153 mac->max_rx_queues = 64; 154 mac->max_msix_vectors = ixgbe_get_pcie_msix_count_generic(hw); 155 156 /* SFP+ Module */ 157 phy->ops.read_i2c_eeprom = &ixgbe_read_i2c_eeprom_82598; 158 159 /* Link */ 160 mac->ops.check_link = &ixgbe_check_mac_link_82598; 161 mac->ops.setup_link = &ixgbe_setup_mac_link_82598; 162 mac->ops.flap_tx_laser = NULL; 163 mac->ops.get_link_capabilities = &ixgbe_get_link_capabilities_82598; 164 mac->ops.setup_rxpba = &ixgbe_set_rxpba_82598; 165 166 /* Manageability interface */ 167 mac->ops.set_fw_drv_ver = NULL; 168 169 return ret_val; 170 } 171 172 /** 173 * ixgbe_init_phy_ops_82598 - PHY/SFP specific init 174 * @hw: pointer to hardware structure 175 * 176 * Initialize any function pointers that were not able to be 177 * set during init_shared_code because the PHY/SFP type was 178 * not known. Perform the SFP init if necessary. 179 * 180 **/ 181 s32 ixgbe_init_phy_ops_82598(struct ixgbe_hw *hw) 182 { 183 struct ixgbe_mac_info *mac = &hw->mac; 184 struct ixgbe_phy_info *phy = &hw->phy; 185 s32 ret_val = IXGBE_SUCCESS; 186 u16 list_offset, data_offset; 187 188 DEBUGFUNC("ixgbe_init_phy_ops_82598"); 189 190 /* Identify the PHY */ 191 phy->ops.identify(hw); 192 193 /* Overwrite the link function pointers if copper PHY */ 194 if (mac->ops.get_media_type(hw) == ixgbe_media_type_copper) { 195 mac->ops.setup_link = &ixgbe_setup_copper_link_82598; 196 mac->ops.get_link_capabilities = 197 &ixgbe_get_copper_link_capabilities_generic; 198 } 199 200 switch (hw->phy.type) { 201 case ixgbe_phy_tn: 202 phy->ops.setup_link = &ixgbe_setup_phy_link_tnx; 203 phy->ops.check_link = &ixgbe_check_phy_link_tnx; 204 phy->ops.get_firmware_version = 205 &ixgbe_get_phy_firmware_version_tnx; 206 break; 207 case ixgbe_phy_nl: 208 phy->ops.reset = &ixgbe_reset_phy_nl; 209 210 /* Call SFP+ identify routine to get the SFP+ module type */ 211 ret_val = phy->ops.identify_sfp(hw); 212 if (ret_val != IXGBE_SUCCESS) 213 goto out; 214 else if (hw->phy.sfp_type == ixgbe_sfp_type_unknown) { 215 ret_val = IXGBE_ERR_SFP_NOT_SUPPORTED; 216 goto out; 217 } 218 219 /* Check to see if SFP+ module is supported */ 220 ret_val = ixgbe_get_sfp_init_sequence_offsets(hw, 221 &list_offset, 222 &data_offset); 223 if (ret_val != IXGBE_SUCCESS) { 224 ret_val = IXGBE_ERR_SFP_NOT_SUPPORTED; 225 goto out; 226 } 227 break; 228 default: 229 break; 230 } 231 232 out: 233 return ret_val; 234 } 235 236 /** 237 * ixgbe_start_hw_82598 - Prepare hardware for Tx/Rx 238 * @hw: pointer to hardware structure 239 * 240 * Starts the hardware using the generic start_hw function. 241 * Disables relaxed ordering Then set pcie completion timeout 242 * 243 **/ 244 s32 ixgbe_start_hw_82598(struct ixgbe_hw *hw) 245 { 246 u32 regval; 247 u32 i; 248 s32 ret_val = IXGBE_SUCCESS; 249 250 DEBUGFUNC("ixgbe_start_hw_82598"); 251 252 ret_val = ixgbe_start_hw_generic(hw); 253 254 /* Disable relaxed ordering */ 255 for (i = 0; ((i < hw->mac.max_tx_queues) && 256 (i < IXGBE_DCA_MAX_QUEUES_82598)); i++) { 257 regval = IXGBE_READ_REG(hw, IXGBE_DCA_TXCTRL(i)); 258 regval &= ~IXGBE_DCA_TXCTRL_DESC_WRO_EN; 259 IXGBE_WRITE_REG(hw, IXGBE_DCA_TXCTRL(i), regval); 260 } 261 262 for (i = 0; ((i < hw->mac.max_rx_queues) && 263 (i < IXGBE_DCA_MAX_QUEUES_82598)); i++) { 264 regval = IXGBE_READ_REG(hw, IXGBE_DCA_RXCTRL(i)); 265 regval &= ~(IXGBE_DCA_RXCTRL_DATA_WRO_EN | 266 IXGBE_DCA_RXCTRL_HEAD_WRO_EN); 267 IXGBE_WRITE_REG(hw, IXGBE_DCA_RXCTRL(i), regval); 268 } 269 270 /* set the completion timeout for interface */ 271 if (ret_val == IXGBE_SUCCESS) 272 ixgbe_set_pcie_completion_timeout(hw); 273 274 return ret_val; 275 } 276 277 /** 278 * ixgbe_get_link_capabilities_82598 - Determines link capabilities 279 * @hw: pointer to hardware structure 280 * @speed: pointer to link speed 281 * @autoneg: boolean auto-negotiation value 282 * 283 * Determines the link capabilities by reading the AUTOC register. 284 **/ 285 static s32 ixgbe_get_link_capabilities_82598(struct ixgbe_hw *hw, 286 ixgbe_link_speed *speed, 287 bool *autoneg) 288 { 289 s32 status = IXGBE_SUCCESS; 290 u32 autoc = 0; 291 292 DEBUGFUNC("ixgbe_get_link_capabilities_82598"); 293 294 /* 295 * Determine link capabilities based on the stored value of AUTOC, 296 * which represents EEPROM defaults. If AUTOC value has not been 297 * stored, use the current register value. 298 */ 299 if (hw->mac.orig_link_settings_stored) 300 autoc = hw->mac.orig_autoc; 301 else 302 autoc = IXGBE_READ_REG(hw, IXGBE_AUTOC); 303 304 switch (autoc & IXGBE_AUTOC_LMS_MASK) { 305 case IXGBE_AUTOC_LMS_1G_LINK_NO_AN: 306 *speed = IXGBE_LINK_SPEED_1GB_FULL; 307 *autoneg = FALSE; 308 break; 309 310 case IXGBE_AUTOC_LMS_10G_LINK_NO_AN: 311 *speed = IXGBE_LINK_SPEED_10GB_FULL; 312 *autoneg = FALSE; 313 break; 314 315 case IXGBE_AUTOC_LMS_1G_AN: 316 *speed = IXGBE_LINK_SPEED_1GB_FULL; 317 *autoneg = TRUE; 318 break; 319 320 case IXGBE_AUTOC_LMS_KX4_AN: 321 case IXGBE_AUTOC_LMS_KX4_AN_1G_AN: 322 *speed = IXGBE_LINK_SPEED_UNKNOWN; 323 if (autoc & IXGBE_AUTOC_KX4_SUPP) 324 *speed |= IXGBE_LINK_SPEED_10GB_FULL; 325 if (autoc & IXGBE_AUTOC_KX_SUPP) 326 *speed |= IXGBE_LINK_SPEED_1GB_FULL; 327 *autoneg = TRUE; 328 break; 329 330 default: 331 status = IXGBE_ERR_LINK_SETUP; 332 break; 333 } 334 335 return status; 336 } 337 338 /** 339 * ixgbe_get_media_type_82598 - Determines media type 340 * @hw: pointer to hardware structure 341 * 342 * Returns the media type (fiber, copper, backplane) 343 **/ 344 static enum ixgbe_media_type ixgbe_get_media_type_82598(struct ixgbe_hw *hw) 345 { 346 enum ixgbe_media_type media_type; 347 348 DEBUGFUNC("ixgbe_get_media_type_82598"); 349 350 /* Detect if there is a copper PHY attached. */ 351 switch (hw->phy.type) { 352 case ixgbe_phy_cu_unknown: 353 case ixgbe_phy_tn: 354 media_type = ixgbe_media_type_copper; 355 goto out; 356 default: 357 break; 358 } 359 360 /* Media type for I82598 is based on device ID */ 361 switch (hw->device_id) { 362 case IXGBE_DEV_ID_82598: 363 case IXGBE_DEV_ID_82598_BX: 364 /* Default device ID is mezzanine card KX/KX4 */ 365 media_type = ixgbe_media_type_backplane; 366 break; 367 case IXGBE_DEV_ID_82598AF_DUAL_PORT: 368 case IXGBE_DEV_ID_82598AF_SINGLE_PORT: 369 case IXGBE_DEV_ID_82598_DA_DUAL_PORT: 370 case IXGBE_DEV_ID_82598_SR_DUAL_PORT_EM: 371 case IXGBE_DEV_ID_82598EB_XF_LR: 372 case IXGBE_DEV_ID_82598EB_SFP_LOM: 373 media_type = ixgbe_media_type_fiber; 374 break; 375 case IXGBE_DEV_ID_82598EB_CX4: 376 case IXGBE_DEV_ID_82598_CX4_DUAL_PORT: 377 media_type = ixgbe_media_type_cx4; 378 break; 379 case IXGBE_DEV_ID_82598AT: 380 case IXGBE_DEV_ID_82598AT2: 381 media_type = ixgbe_media_type_copper; 382 break; 383 default: 384 media_type = ixgbe_media_type_unknown; 385 break; 386 } 387 out: 388 return media_type; 389 } 390 391 /** 392 * ixgbe_fc_enable_82598 - Enable flow control 393 * @hw: pointer to hardware structure 394 * 395 * Enable flow control according to the current settings. 396 **/ 397 s32 ixgbe_fc_enable_82598(struct ixgbe_hw *hw) 398 { 399 s32 ret_val = IXGBE_SUCCESS; 400 u32 fctrl_reg; 401 u32 rmcs_reg; 402 u32 reg; 403 u32 fcrtl, fcrth; 404 u32 link_speed = 0; 405 int i; 406 bool link_up; 407 408 DEBUGFUNC("ixgbe_fc_enable_82598"); 409 410 /* Validate the water mark configuration */ 411 if (!hw->fc.pause_time) { 412 ret_val = IXGBE_ERR_INVALID_LINK_SETTINGS; 413 goto out; 414 } 415 416 /* Low water mark of zero causes XOFF floods */ 417 for (i = 0; i < IXGBE_DCB_MAX_TRAFFIC_CLASS; i++) { 418 if ((hw->fc.current_mode & ixgbe_fc_tx_pause) && 419 hw->fc.high_water[i]) { 420 if (!hw->fc.low_water[i] || 421 hw->fc.low_water[i] >= hw->fc.high_water[i]) { 422 DEBUGOUT("Invalid water mark configuration\n"); 423 ret_val = IXGBE_ERR_INVALID_LINK_SETTINGS; 424 goto out; 425 } 426 } 427 } 428 429 /* 430 * On 82598 having Rx FC on causes resets while doing 1G 431 * so if it's on turn it off once we know link_speed. For 432 * more details see 82598 Specification update. 433 */ 434 hw->mac.ops.check_link(hw, &link_speed, &link_up, FALSE); 435 if (link_up && link_speed == IXGBE_LINK_SPEED_1GB_FULL) { 436 switch (hw->fc.requested_mode) { 437 case ixgbe_fc_full: 438 hw->fc.requested_mode = ixgbe_fc_tx_pause; 439 break; 440 case ixgbe_fc_rx_pause: 441 hw->fc.requested_mode = ixgbe_fc_none; 442 break; 443 default: 444 /* no change */ 445 break; 446 } 447 } 448 449 /* Negotiate the fc mode to use */ 450 ixgbe_fc_autoneg(hw); 451 452 /* Disable any previous flow control settings */ 453 fctrl_reg = IXGBE_READ_REG(hw, IXGBE_FCTRL); 454 fctrl_reg &= ~(IXGBE_FCTRL_RFCE | IXGBE_FCTRL_RPFCE); 455 456 rmcs_reg = IXGBE_READ_REG(hw, IXGBE_RMCS); 457 rmcs_reg &= ~(IXGBE_RMCS_TFCE_PRIORITY | IXGBE_RMCS_TFCE_802_3X); 458 459 /* 460 * The possible values of fc.current_mode are: 461 * 0: Flow control is completely disabled 462 * 1: Rx flow control is enabled (we can receive pause frames, 463 * but not send pause frames). 464 * 2: Tx flow control is enabled (we can send pause frames but 465 * we do not support receiving pause frames). 466 * 3: Both Rx and Tx flow control (symmetric) are enabled. 467 * other: Invalid. 468 */ 469 switch (hw->fc.current_mode) { 470 case ixgbe_fc_none: 471 /* 472 * Flow control is disabled by software override or autoneg. 473 * The code below will actually disable it in the HW. 474 */ 475 break; 476 case ixgbe_fc_rx_pause: 477 /* 478 * Rx Flow control is enabled and Tx Flow control is 479 * disabled by software override. Since there really 480 * isn't a way to advertise that we are capable of RX 481 * Pause ONLY, we will advertise that we support both 482 * symmetric and asymmetric Rx PAUSE. Later, we will 483 * disable the adapter's ability to send PAUSE frames. 484 */ 485 fctrl_reg |= IXGBE_FCTRL_RFCE; 486 break; 487 case ixgbe_fc_tx_pause: 488 /* 489 * Tx Flow control is enabled, and Rx Flow control is 490 * disabled by software override. 491 */ 492 rmcs_reg |= IXGBE_RMCS_TFCE_802_3X; 493 break; 494 case ixgbe_fc_full: 495 /* Flow control (both Rx and Tx) is enabled by SW override. */ 496 fctrl_reg |= IXGBE_FCTRL_RFCE; 497 rmcs_reg |= IXGBE_RMCS_TFCE_802_3X; 498 break; 499 default: 500 DEBUGOUT("Flow control param set incorrectly\n"); 501 ret_val = IXGBE_ERR_CONFIG; 502 goto out; 503 } 504 505 /* Set 802.3x based flow control settings. */ 506 fctrl_reg |= IXGBE_FCTRL_DPF; 507 IXGBE_WRITE_REG(hw, IXGBE_FCTRL, fctrl_reg); 508 IXGBE_WRITE_REG(hw, IXGBE_RMCS, rmcs_reg); 509 510 /* Set up and enable Rx high/low water mark thresholds, enable XON. */ 511 for (i = 0; i < IXGBE_DCB_MAX_TRAFFIC_CLASS; i++) { 512 if ((hw->fc.current_mode & ixgbe_fc_tx_pause) && 513 hw->fc.high_water[i]) { 514 fcrtl = (hw->fc.low_water[i] << 10) | IXGBE_FCRTL_XONE; 515 fcrth = (hw->fc.high_water[i] << 10) | IXGBE_FCRTH_FCEN; 516 IXGBE_WRITE_REG(hw, IXGBE_FCRTL(i), fcrtl); 517 IXGBE_WRITE_REG(hw, IXGBE_FCRTH(i), fcrth); 518 } else { 519 IXGBE_WRITE_REG(hw, IXGBE_FCRTL(i), 0); 520 IXGBE_WRITE_REG(hw, IXGBE_FCRTH(i), 0); 521 } 522 523 } 524 525 /* Configure pause time (2 TCs per register) */ 526 reg = hw->fc.pause_time * 0x00010001; 527 for (i = 0; i < (IXGBE_DCB_MAX_TRAFFIC_CLASS / 2); i++) 528 IXGBE_WRITE_REG(hw, IXGBE_FCTTV(i), reg); 529 530 /* Configure flow control refresh threshold value */ 531 IXGBE_WRITE_REG(hw, IXGBE_FCRTV, hw->fc.pause_time / 2); 532 533 out: 534 return ret_val; 535 } 536 537 /** 538 * ixgbe_start_mac_link_82598 - Configures MAC link settings 539 * @hw: pointer to hardware structure 540 * 541 * Configures link settings based on values in the ixgbe_hw struct. 542 * Restarts the link. Performs autonegotiation if needed. 543 **/ 544 static s32 ixgbe_start_mac_link_82598(struct ixgbe_hw *hw, 545 bool autoneg_wait_to_complete) 546 { 547 u32 autoc_reg; 548 u32 links_reg; 549 u32 i; 550 s32 status = IXGBE_SUCCESS; 551 552 DEBUGFUNC("ixgbe_start_mac_link_82598"); 553 554 /* Restart link */ 555 autoc_reg = IXGBE_READ_REG(hw, IXGBE_AUTOC); 556 autoc_reg |= IXGBE_AUTOC_AN_RESTART; 557 IXGBE_WRITE_REG(hw, IXGBE_AUTOC, autoc_reg); 558 559 /* Only poll for autoneg to complete if specified to do so */ 560 if (autoneg_wait_to_complete) { 561 if ((autoc_reg & IXGBE_AUTOC_LMS_MASK) == 562 IXGBE_AUTOC_LMS_KX4_AN || 563 (autoc_reg & IXGBE_AUTOC_LMS_MASK) == 564 IXGBE_AUTOC_LMS_KX4_AN_1G_AN) { 565 links_reg = 0; /* Just in case Autoneg time = 0 */ 566 for (i = 0; i < IXGBE_AUTO_NEG_TIME; i++) { 567 links_reg = IXGBE_READ_REG(hw, IXGBE_LINKS); 568 if (links_reg & IXGBE_LINKS_KX_AN_COMP) 569 break; 570 msec_delay(100); 571 } 572 if (!(links_reg & IXGBE_LINKS_KX_AN_COMP)) { 573 status = IXGBE_ERR_AUTONEG_NOT_COMPLETE; 574 DEBUGOUT("Autonegotiation did not complete.\n"); 575 } 576 } 577 } 578 579 /* Add delay to filter out noises during initial link setup */ 580 msec_delay(50); 581 582 return status; 583 } 584 585 /** 586 * ixgbe_validate_link_ready - Function looks for phy link 587 * @hw: pointer to hardware structure 588 * 589 * Function indicates success when phy link is available. If phy is not ready 590 * within 5 seconds of MAC indicating link, the function returns error. 591 **/ 592 static s32 ixgbe_validate_link_ready(struct ixgbe_hw *hw) 593 { 594 u32 timeout; 595 u16 an_reg; 596 597 if (hw->device_id != IXGBE_DEV_ID_82598AT2) 598 return IXGBE_SUCCESS; 599 600 for (timeout = 0; 601 timeout < IXGBE_VALIDATE_LINK_READY_TIMEOUT; timeout++) { 602 hw->phy.ops.read_reg(hw, IXGBE_MDIO_AUTO_NEG_STATUS, 603 IXGBE_MDIO_AUTO_NEG_DEV_TYPE, &an_reg); 604 605 if ((an_reg & IXGBE_MII_AUTONEG_COMPLETE) && 606 (an_reg & IXGBE_MII_AUTONEG_LINK_UP)) 607 break; 608 609 msec_delay(100); 610 } 611 612 if (timeout == IXGBE_VALIDATE_LINK_READY_TIMEOUT) { 613 DEBUGOUT("Link was indicated but link is down\n"); 614 return IXGBE_ERR_LINK_SETUP; 615 } 616 617 return IXGBE_SUCCESS; 618 } 619 620 /** 621 * ixgbe_check_mac_link_82598 - Get link/speed status 622 * @hw: pointer to hardware structure 623 * @speed: pointer to link speed 624 * @link_up: TRUE is link is up, FALSE otherwise 625 * @link_up_wait_to_complete: bool used to wait for link up or not 626 * 627 * Reads the links register to determine if link is up and the current speed 628 **/ 629 static s32 ixgbe_check_mac_link_82598(struct ixgbe_hw *hw, 630 ixgbe_link_speed *speed, bool *link_up, 631 bool link_up_wait_to_complete) 632 { 633 u32 links_reg; 634 u32 i; 635 u16 link_reg, adapt_comp_reg; 636 637 DEBUGFUNC("ixgbe_check_mac_link_82598"); 638 639 /* 640 * SERDES PHY requires us to read link status from undocumented 641 * register 0xC79F. Bit 0 set indicates link is up/ready; clear 642 * indicates link down. OxC00C is read to check that the XAUI lanes 643 * are active. Bit 0 clear indicates active; set indicates inactive. 644 */ 645 if (hw->phy.type == ixgbe_phy_nl) { 646 hw->phy.ops.read_reg(hw, 0xC79F, IXGBE_TWINAX_DEV, &link_reg); 647 hw->phy.ops.read_reg(hw, 0xC79F, IXGBE_TWINAX_DEV, &link_reg); 648 hw->phy.ops.read_reg(hw, 0xC00C, IXGBE_TWINAX_DEV, 649 &adapt_comp_reg); 650 if (link_up_wait_to_complete) { 651 for (i = 0; i < IXGBE_LINK_UP_TIME; i++) { 652 if ((link_reg & 1) && 653 ((adapt_comp_reg & 1) == 0)) { 654 *link_up = TRUE; 655 break; 656 } else { 657 *link_up = FALSE; 658 } 659 msec_delay(100); 660 hw->phy.ops.read_reg(hw, 0xC79F, 661 IXGBE_TWINAX_DEV, 662 &link_reg); 663 hw->phy.ops.read_reg(hw, 0xC00C, 664 IXGBE_TWINAX_DEV, 665 &adapt_comp_reg); 666 } 667 } else { 668 if ((link_reg & 1) && ((adapt_comp_reg & 1) == 0)) 669 *link_up = TRUE; 670 else 671 *link_up = FALSE; 672 } 673 674 if (*link_up == FALSE) 675 goto out; 676 } 677 678 links_reg = IXGBE_READ_REG(hw, IXGBE_LINKS); 679 if (link_up_wait_to_complete) { 680 for (i = 0; i < IXGBE_LINK_UP_TIME; i++) { 681 if (links_reg & IXGBE_LINKS_UP) { 682 *link_up = TRUE; 683 break; 684 } else { 685 *link_up = FALSE; 686 } 687 msec_delay(100); 688 links_reg = IXGBE_READ_REG(hw, IXGBE_LINKS); 689 } 690 } else { 691 if (links_reg & IXGBE_LINKS_UP) 692 *link_up = TRUE; 693 else 694 *link_up = FALSE; 695 } 696 697 if (links_reg & IXGBE_LINKS_SPEED) 698 *speed = IXGBE_LINK_SPEED_10GB_FULL; 699 else 700 *speed = IXGBE_LINK_SPEED_1GB_FULL; 701 702 if ((hw->device_id == IXGBE_DEV_ID_82598AT2) && (*link_up == TRUE) && 703 (ixgbe_validate_link_ready(hw) != IXGBE_SUCCESS)) 704 *link_up = FALSE; 705 706 out: 707 return IXGBE_SUCCESS; 708 } 709 710 /** 711 * ixgbe_setup_mac_link_82598 - Set MAC link speed 712 * @hw: pointer to hardware structure 713 * @speed: new link speed 714 * @autoneg: TRUE if autonegotiation enabled 715 * @autoneg_wait_to_complete: TRUE when waiting for completion is needed 716 * 717 * Set the link speed in the AUTOC register and restarts link. 718 **/ 719 static s32 ixgbe_setup_mac_link_82598(struct ixgbe_hw *hw, 720 ixgbe_link_speed speed, bool autoneg, 721 bool autoneg_wait_to_complete) 722 { 723 s32 status; 724 ixgbe_link_speed link_capabilities = IXGBE_LINK_SPEED_UNKNOWN; 725 u32 curr_autoc = IXGBE_READ_REG(hw, IXGBE_AUTOC); 726 u32 autoc = curr_autoc; 727 u32 link_mode = autoc & IXGBE_AUTOC_LMS_MASK; 728 729 DEBUGFUNC("ixgbe_setup_mac_link_82598"); 730 731 /* Check to see if speed passed in is supported. */ 732 status = ixgbe_get_link_capabilities(hw, &link_capabilities, &autoneg); 733 if (status != IXGBE_SUCCESS) 734 return (status); 735 speed &= link_capabilities; 736 737 if (speed == IXGBE_LINK_SPEED_UNKNOWN) 738 status = IXGBE_ERR_LINK_SETUP; 739 740 /* Set KX4/KX support according to speed requested */ 741 else if (link_mode == IXGBE_AUTOC_LMS_KX4_AN || 742 link_mode == IXGBE_AUTOC_LMS_KX4_AN_1G_AN) { 743 autoc &= ~IXGBE_AUTOC_KX4_KX_SUPP_MASK; 744 if (speed & IXGBE_LINK_SPEED_10GB_FULL) 745 autoc |= IXGBE_AUTOC_KX4_SUPP; 746 if (speed & IXGBE_LINK_SPEED_1GB_FULL) 747 autoc |= IXGBE_AUTOC_KX_SUPP; 748 if (autoc != curr_autoc) 749 IXGBE_WRITE_REG(hw, IXGBE_AUTOC, autoc); 750 } 751 752 if (status == IXGBE_SUCCESS) { 753 /* 754 * Setup and restart the link based on the new values in 755 * ixgbe_hw This will write the AUTOC register based on the new 756 * stored values 757 */ 758 status = ixgbe_start_mac_link_82598(hw, 759 autoneg_wait_to_complete); 760 } 761 762 return status; 763 } 764 765 766 /** 767 * ixgbe_setup_copper_link_82598 - Set the PHY autoneg advertised field 768 * @hw: pointer to hardware structure 769 * @speed: new link speed 770 * @autoneg: TRUE if autonegotiation enabled 771 * @autoneg_wait_to_complete: TRUE if waiting is needed to complete 772 * 773 * Sets the link speed in the AUTOC register in the MAC and restarts link. 774 **/ 775 static s32 ixgbe_setup_copper_link_82598(struct ixgbe_hw *hw, 776 ixgbe_link_speed speed, 777 bool autoneg, 778 bool autoneg_wait_to_complete) 779 { 780 s32 status; 781 782 DEBUGFUNC("ixgbe_setup_copper_link_82598"); 783 784 /* Setup the PHY according to input speed */ 785 status = hw->phy.ops.setup_link_speed(hw, speed, autoneg, 786 autoneg_wait_to_complete); 787 if (status == IXGBE_SUCCESS) { 788 /* Set up MAC */ 789 status = 790 ixgbe_start_mac_link_82598(hw, autoneg_wait_to_complete); 791 } 792 793 return status; 794 } 795 796 /** 797 * ixgbe_reset_hw_82598 - Performs hardware reset 798 * @hw: pointer to hardware structure 799 * 800 * Resets the hardware by resetting the transmit and receive units, masks and 801 * clears all interrupts, performing a PHY reset, and performing a link (MAC) 802 * reset. 803 **/ 804 static s32 ixgbe_reset_hw_82598(struct ixgbe_hw *hw) 805 { 806 s32 status = IXGBE_SUCCESS; 807 s32 phy_status = IXGBE_SUCCESS; 808 u32 ctrl; 809 u32 gheccr; 810 u32 i; 811 u32 autoc; 812 u8 analog_val; 813 814 DEBUGFUNC("ixgbe_reset_hw_82598"); 815 816 /* Call adapter stop to disable tx/rx and clear interrupts */ 817 status = hw->mac.ops.stop_adapter(hw); 818 if (status != IXGBE_SUCCESS) 819 goto reset_hw_out; 820 821 /* 822 * Power up the Atlas Tx lanes if they are currently powered down. 823 * Atlas Tx lanes are powered down for MAC loopback tests, but 824 * they are not automatically restored on reset. 825 */ 826 hw->mac.ops.read_analog_reg8(hw, IXGBE_ATLAS_PDN_LPBK, &analog_val); 827 if (analog_val & IXGBE_ATLAS_PDN_TX_REG_EN) { 828 /* Enable Tx Atlas so packets can be transmitted again */ 829 hw->mac.ops.read_analog_reg8(hw, IXGBE_ATLAS_PDN_LPBK, 830 &analog_val); 831 analog_val &= ~IXGBE_ATLAS_PDN_TX_REG_EN; 832 hw->mac.ops.write_analog_reg8(hw, IXGBE_ATLAS_PDN_LPBK, 833 analog_val); 834 835 hw->mac.ops.read_analog_reg8(hw, IXGBE_ATLAS_PDN_10G, 836 &analog_val); 837 analog_val &= ~IXGBE_ATLAS_PDN_TX_10G_QL_ALL; 838 hw->mac.ops.write_analog_reg8(hw, IXGBE_ATLAS_PDN_10G, 839 analog_val); 840 841 hw->mac.ops.read_analog_reg8(hw, IXGBE_ATLAS_PDN_1G, 842 &analog_val); 843 analog_val &= ~IXGBE_ATLAS_PDN_TX_1G_QL_ALL; 844 hw->mac.ops.write_analog_reg8(hw, IXGBE_ATLAS_PDN_1G, 845 analog_val); 846 847 hw->mac.ops.read_analog_reg8(hw, IXGBE_ATLAS_PDN_AN, 848 &analog_val); 849 analog_val &= ~IXGBE_ATLAS_PDN_TX_AN_QL_ALL; 850 hw->mac.ops.write_analog_reg8(hw, IXGBE_ATLAS_PDN_AN, 851 analog_val); 852 } 853 854 /* Reset PHY */ 855 if (hw->phy.reset_disable == FALSE) { 856 /* PHY ops must be identified and initialized prior to reset */ 857 858 /* Init PHY and function pointers, perform SFP setup */ 859 phy_status = hw->phy.ops.init(hw); 860 if (phy_status == IXGBE_ERR_SFP_NOT_SUPPORTED) 861 goto reset_hw_out; 862 if (phy_status == IXGBE_ERR_SFP_NOT_PRESENT) 863 goto mac_reset_top; 864 865 hw->phy.ops.reset(hw); 866 } 867 868 mac_reset_top: 869 /* 870 * Issue global reset to the MAC. This needs to be a SW reset. 871 * If link reset is used, it might reset the MAC when mng is using it 872 */ 873 ctrl = IXGBE_READ_REG(hw, IXGBE_CTRL) | IXGBE_CTRL_RST; 874 IXGBE_WRITE_REG(hw, IXGBE_CTRL, ctrl); 875 IXGBE_WRITE_FLUSH(hw); 876 877 /* Poll for reset bit to self-clear indicating reset is complete */ 878 for (i = 0; i < 10; i++) { 879 usec_delay(1); 880 ctrl = IXGBE_READ_REG(hw, IXGBE_CTRL); 881 if (!(ctrl & IXGBE_CTRL_RST)) 882 break; 883 } 884 if (ctrl & IXGBE_CTRL_RST) { 885 status = IXGBE_ERR_RESET_FAILED; 886 DEBUGOUT("Reset polling failed to complete.\n"); 887 } 888 889 msec_delay(50); 890 891 /* 892 * Double resets are required for recovery from certain error 893 * conditions. Between resets, it is necessary to stall to allow time 894 * for any pending HW events to complete. 895 */ 896 if (hw->mac.flags & IXGBE_FLAGS_DOUBLE_RESET_REQUIRED) { 897 hw->mac.flags &= ~IXGBE_FLAGS_DOUBLE_RESET_REQUIRED; 898 goto mac_reset_top; 899 } 900 901 gheccr = IXGBE_READ_REG(hw, IXGBE_GHECCR); 902 gheccr &= ~((1 << 21) | (1 << 18) | (1 << 9) | (1 << 6)); 903 IXGBE_WRITE_REG(hw, IXGBE_GHECCR, gheccr); 904 905 /* 906 * Store the original AUTOC value if it has not been 907 * stored off yet. Otherwise restore the stored original 908 * AUTOC value since the reset operation sets back to deaults. 909 */ 910 autoc = IXGBE_READ_REG(hw, IXGBE_AUTOC); 911 if (hw->mac.orig_link_settings_stored == FALSE) { 912 hw->mac.orig_autoc = autoc; 913 hw->mac.orig_link_settings_stored = TRUE; 914 } else if (autoc != hw->mac.orig_autoc) { 915 IXGBE_WRITE_REG(hw, IXGBE_AUTOC, hw->mac.orig_autoc); 916 } 917 918 /* Store the permanent mac address */ 919 hw->mac.ops.get_mac_addr(hw, hw->mac.perm_addr); 920 921 /* 922 * Store MAC address from RAR0, clear receive address registers, and 923 * clear the multicast table 924 */ 925 hw->mac.ops.init_rx_addrs(hw); 926 927 reset_hw_out: 928 if (phy_status != IXGBE_SUCCESS) 929 status = phy_status; 930 931 return status; 932 } 933 934 /** 935 * ixgbe_set_vmdq_82598 - Associate a VMDq set index with a rx address 936 * @hw: pointer to hardware struct 937 * @rar: receive address register index to associate with a VMDq index 938 * @vmdq: VMDq set index 939 **/ 940 s32 ixgbe_set_vmdq_82598(struct ixgbe_hw *hw, u32 rar, u32 vmdq) 941 { 942 u32 rar_high; 943 u32 rar_entries = hw->mac.num_rar_entries; 944 945 DEBUGFUNC("ixgbe_set_vmdq_82598"); 946 947 /* Make sure we are using a valid rar index range */ 948 if (rar >= rar_entries) { 949 DEBUGOUT1("RAR index %d is out of range.\n", rar); 950 return IXGBE_ERR_INVALID_ARGUMENT; 951 } 952 953 rar_high = IXGBE_READ_REG(hw, IXGBE_RAH(rar)); 954 rar_high &= ~IXGBE_RAH_VIND_MASK; 955 rar_high |= ((vmdq << IXGBE_RAH_VIND_SHIFT) & IXGBE_RAH_VIND_MASK); 956 IXGBE_WRITE_REG(hw, IXGBE_RAH(rar), rar_high); 957 return IXGBE_SUCCESS; 958 } 959 960 /** 961 * ixgbe_clear_vmdq_82598 - Disassociate a VMDq set index from an rx address 962 * @hw: pointer to hardware struct 963 * @rar: receive address register index to associate with a VMDq index 964 * @vmdq: VMDq clear index (not used in 82598, but elsewhere) 965 **/ 966 static s32 ixgbe_clear_vmdq_82598(struct ixgbe_hw *hw, u32 rar, u32 vmdq) 967 { 968 u32 rar_high; 969 u32 rar_entries = hw->mac.num_rar_entries; 970 971 UNREFERENCED_1PARAMETER(vmdq); 972 973 /* Make sure we are using a valid rar index range */ 974 if (rar >= rar_entries) { 975 DEBUGOUT1("RAR index %d is out of range.\n", rar); 976 return IXGBE_ERR_INVALID_ARGUMENT; 977 } 978 979 rar_high = IXGBE_READ_REG(hw, IXGBE_RAH(rar)); 980 if (rar_high & IXGBE_RAH_VIND_MASK) { 981 rar_high &= ~IXGBE_RAH_VIND_MASK; 982 IXGBE_WRITE_REG(hw, IXGBE_RAH(rar), rar_high); 983 } 984 985 return IXGBE_SUCCESS; 986 } 987 988 /** 989 * ixgbe_set_vfta_82598 - Set VLAN filter table 990 * @hw: pointer to hardware structure 991 * @vlan: VLAN id to write to VLAN filter 992 * @vind: VMDq output index that maps queue to VLAN id in VFTA 993 * @vlan_on: boolean flag to turn on/off VLAN in VFTA 994 * 995 * Turn on/off specified VLAN in the VLAN filter table. 996 **/ 997 s32 ixgbe_set_vfta_82598(struct ixgbe_hw *hw, u32 vlan, u32 vind, 998 bool vlan_on) 999 { 1000 u32 regindex; 1001 u32 bitindex; 1002 u32 bits; 1003 u32 vftabyte; 1004 1005 DEBUGFUNC("ixgbe_set_vfta_82598"); 1006 1007 if (vlan > 4095) 1008 return IXGBE_ERR_PARAM; 1009 1010 /* Determine 32-bit word position in array */ 1011 regindex = (vlan >> 5) & 0x7F; /* upper seven bits */ 1012 1013 /* Determine the location of the (VMD) queue index */ 1014 vftabyte = ((vlan >> 3) & 0x03); /* bits (4:3) indicating byte array */ 1015 bitindex = (vlan & 0x7) << 2; /* lower 3 bits indicate nibble */ 1016 1017 /* Set the nibble for VMD queue index */ 1018 bits = IXGBE_READ_REG(hw, IXGBE_VFTAVIND(vftabyte, regindex)); 1019 bits &= (~(0x0F << bitindex)); 1020 bits |= (vind << bitindex); 1021 IXGBE_WRITE_REG(hw, IXGBE_VFTAVIND(vftabyte, regindex), bits); 1022 1023 /* Determine the location of the bit for this VLAN id */ 1024 bitindex = vlan & 0x1F; /* lower five bits */ 1025 1026 bits = IXGBE_READ_REG(hw, IXGBE_VFTA(regindex)); 1027 if (vlan_on) 1028 /* Turn on this VLAN id */ 1029 bits |= (1 << bitindex); 1030 else 1031 /* Turn off this VLAN id */ 1032 bits &= ~(1 << bitindex); 1033 IXGBE_WRITE_REG(hw, IXGBE_VFTA(regindex), bits); 1034 1035 return IXGBE_SUCCESS; 1036 } 1037 1038 /** 1039 * ixgbe_clear_vfta_82598 - Clear VLAN filter table 1040 * @hw: pointer to hardware structure 1041 * 1042 * Clears the VLAN filer table, and the VMDq index associated with the filter 1043 **/ 1044 static s32 ixgbe_clear_vfta_82598(struct ixgbe_hw *hw) 1045 { 1046 u32 offset; 1047 u32 vlanbyte; 1048 1049 DEBUGFUNC("ixgbe_clear_vfta_82598"); 1050 1051 for (offset = 0; offset < hw->mac.vft_size; offset++) 1052 IXGBE_WRITE_REG(hw, IXGBE_VFTA(offset), 0); 1053 1054 for (vlanbyte = 0; vlanbyte < 4; vlanbyte++) 1055 for (offset = 0; offset < hw->mac.vft_size; offset++) 1056 IXGBE_WRITE_REG(hw, IXGBE_VFTAVIND(vlanbyte, offset), 1057 0); 1058 1059 return IXGBE_SUCCESS; 1060 } 1061 1062 /** 1063 * ixgbe_read_analog_reg8_82598 - Reads 8 bit Atlas analog register 1064 * @hw: pointer to hardware structure 1065 * @reg: analog register to read 1066 * @val: read value 1067 * 1068 * Performs read operation to Atlas analog register specified. 1069 **/ 1070 s32 ixgbe_read_analog_reg8_82598(struct ixgbe_hw *hw, u32 reg, u8 *val) 1071 { 1072 u32 atlas_ctl; 1073 1074 DEBUGFUNC("ixgbe_read_analog_reg8_82598"); 1075 1076 IXGBE_WRITE_REG(hw, IXGBE_ATLASCTL, 1077 IXGBE_ATLASCTL_WRITE_CMD | (reg << 8)); 1078 IXGBE_WRITE_FLUSH(hw); 1079 usec_delay(10); 1080 atlas_ctl = IXGBE_READ_REG(hw, IXGBE_ATLASCTL); 1081 *val = (u8)atlas_ctl; 1082 1083 return IXGBE_SUCCESS; 1084 } 1085 1086 /** 1087 * ixgbe_write_analog_reg8_82598 - Writes 8 bit Atlas analog register 1088 * @hw: pointer to hardware structure 1089 * @reg: atlas register to write 1090 * @val: value to write 1091 * 1092 * Performs write operation to Atlas analog register specified. 1093 **/ 1094 s32 ixgbe_write_analog_reg8_82598(struct ixgbe_hw *hw, u32 reg, u8 val) 1095 { 1096 u32 atlas_ctl; 1097 1098 DEBUGFUNC("ixgbe_write_analog_reg8_82598"); 1099 1100 atlas_ctl = (reg << 8) | val; 1101 IXGBE_WRITE_REG(hw, IXGBE_ATLASCTL, atlas_ctl); 1102 IXGBE_WRITE_FLUSH(hw); 1103 usec_delay(10); 1104 1105 return IXGBE_SUCCESS; 1106 } 1107 1108 /** 1109 * ixgbe_read_i2c_eeprom_82598 - Reads 8 bit word over I2C interface. 1110 * @hw: pointer to hardware structure 1111 * @byte_offset: EEPROM byte offset to read 1112 * @eeprom_data: value read 1113 * 1114 * Performs 8 byte read operation to SFP module's EEPROM over I2C interface. 1115 **/ 1116 s32 ixgbe_read_i2c_eeprom_82598(struct ixgbe_hw *hw, u8 byte_offset, 1117 u8 *eeprom_data) 1118 { 1119 s32 status = IXGBE_SUCCESS; 1120 u16 sfp_addr = 0; 1121 u16 sfp_data = 0; 1122 u16 sfp_stat = 0; 1123 u32 i; 1124 1125 DEBUGFUNC("ixgbe_read_i2c_eeprom_82598"); 1126 1127 if (hw->phy.type == ixgbe_phy_nl) { 1128 /* 1129 * NetLogic phy SDA/SCL registers are at addresses 0xC30A to 1130 * 0xC30D. These registers are used to talk to the SFP+ 1131 * module's EEPROM through the SDA/SCL (I2C) interface. 1132 */ 1133 sfp_addr = (IXGBE_I2C_EEPROM_DEV_ADDR << 8) + byte_offset; 1134 sfp_addr = (sfp_addr | IXGBE_I2C_EEPROM_READ_MASK); 1135 hw->phy.ops.write_reg(hw, 1136 IXGBE_MDIO_PMA_PMD_SDA_SCL_ADDR, 1137 IXGBE_MDIO_PMA_PMD_DEV_TYPE, 1138 sfp_addr); 1139 1140 /* Poll status */ 1141 for (i = 0; i < 100; i++) { 1142 hw->phy.ops.read_reg(hw, 1143 IXGBE_MDIO_PMA_PMD_SDA_SCL_STAT, 1144 IXGBE_MDIO_PMA_PMD_DEV_TYPE, 1145 &sfp_stat); 1146 sfp_stat = sfp_stat & IXGBE_I2C_EEPROM_STATUS_MASK; 1147 if (sfp_stat != IXGBE_I2C_EEPROM_STATUS_IN_PROGRESS) 1148 break; 1149 msec_delay(10); 1150 } 1151 1152 if (sfp_stat != IXGBE_I2C_EEPROM_STATUS_PASS) { 1153 DEBUGOUT("EEPROM read did not pass.\n"); 1154 status = IXGBE_ERR_SFP_NOT_PRESENT; 1155 goto out; 1156 } 1157 1158 /* Read data */ 1159 hw->phy.ops.read_reg(hw, IXGBE_MDIO_PMA_PMD_SDA_SCL_DATA, 1160 IXGBE_MDIO_PMA_PMD_DEV_TYPE, &sfp_data); 1161 1162 *eeprom_data = (u8)(sfp_data >> 8); 1163 } else { 1164 status = IXGBE_ERR_PHY; 1165 goto out; 1166 } 1167 1168 out: 1169 return status; 1170 } 1171 1172 /** 1173 * ixgbe_get_supported_physical_layer_82598 - Returns physical layer type 1174 * @hw: pointer to hardware structure 1175 * 1176 * Determines physical layer capabilities of the current configuration. 1177 **/ 1178 u32 ixgbe_get_supported_physical_layer_82598(struct ixgbe_hw *hw) 1179 { 1180 u32 physical_layer = IXGBE_PHYSICAL_LAYER_UNKNOWN; 1181 u32 autoc = IXGBE_READ_REG(hw, IXGBE_AUTOC); 1182 u32 pma_pmd_10g = autoc & IXGBE_AUTOC_10G_PMA_PMD_MASK; 1183 u32 pma_pmd_1g = autoc & IXGBE_AUTOC_1G_PMA_PMD_MASK; 1184 u16 ext_ability = 0; 1185 1186 DEBUGFUNC("ixgbe_get_supported_physical_layer_82598"); 1187 1188 hw->phy.ops.identify(hw); 1189 1190 /* Copper PHY must be checked before AUTOC LMS to determine correct 1191 * physical layer because 10GBase-T PHYs use LMS = KX4/KX */ 1192 switch (hw->phy.type) { 1193 case ixgbe_phy_tn: 1194 case ixgbe_phy_cu_unknown: 1195 hw->phy.ops.read_reg(hw, IXGBE_MDIO_PHY_EXT_ABILITY, 1196 IXGBE_MDIO_PMA_PMD_DEV_TYPE, &ext_ability); 1197 if (ext_ability & IXGBE_MDIO_PHY_10GBASET_ABILITY) 1198 physical_layer |= IXGBE_PHYSICAL_LAYER_10GBASE_T; 1199 if (ext_ability & IXGBE_MDIO_PHY_1000BASET_ABILITY) 1200 physical_layer |= IXGBE_PHYSICAL_LAYER_1000BASE_T; 1201 if (ext_ability & IXGBE_MDIO_PHY_100BASETX_ABILITY) 1202 physical_layer |= IXGBE_PHYSICAL_LAYER_100BASE_TX; 1203 goto out; 1204 default: 1205 break; 1206 } 1207 1208 switch (autoc & IXGBE_AUTOC_LMS_MASK) { 1209 case IXGBE_AUTOC_LMS_1G_AN: 1210 case IXGBE_AUTOC_LMS_1G_LINK_NO_AN: 1211 if (pma_pmd_1g == IXGBE_AUTOC_1G_KX) 1212 physical_layer = IXGBE_PHYSICAL_LAYER_1000BASE_KX; 1213 else 1214 physical_layer = IXGBE_PHYSICAL_LAYER_1000BASE_BX; 1215 break; 1216 case IXGBE_AUTOC_LMS_10G_LINK_NO_AN: 1217 if (pma_pmd_10g == IXGBE_AUTOC_10G_CX4) 1218 physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_CX4; 1219 else if (pma_pmd_10g == IXGBE_AUTOC_10G_KX4) 1220 physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_KX4; 1221 else /* XAUI */ 1222 physical_layer = IXGBE_PHYSICAL_LAYER_UNKNOWN; 1223 break; 1224 case IXGBE_AUTOC_LMS_KX4_AN: 1225 case IXGBE_AUTOC_LMS_KX4_AN_1G_AN: 1226 if (autoc & IXGBE_AUTOC_KX_SUPP) 1227 physical_layer |= IXGBE_PHYSICAL_LAYER_1000BASE_KX; 1228 if (autoc & IXGBE_AUTOC_KX4_SUPP) 1229 physical_layer |= IXGBE_PHYSICAL_LAYER_10GBASE_KX4; 1230 break; 1231 default: 1232 break; 1233 } 1234 1235 if (hw->phy.type == ixgbe_phy_nl) { 1236 hw->phy.ops.identify_sfp(hw); 1237 1238 switch (hw->phy.sfp_type) { 1239 case ixgbe_sfp_type_da_cu: 1240 physical_layer = IXGBE_PHYSICAL_LAYER_SFP_PLUS_CU; 1241 break; 1242 case ixgbe_sfp_type_sr: 1243 physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_SR; 1244 break; 1245 case ixgbe_sfp_type_lr: 1246 physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_LR; 1247 break; 1248 default: 1249 physical_layer = IXGBE_PHYSICAL_LAYER_UNKNOWN; 1250 break; 1251 } 1252 } 1253 1254 switch (hw->device_id) { 1255 case IXGBE_DEV_ID_82598_DA_DUAL_PORT: 1256 physical_layer = IXGBE_PHYSICAL_LAYER_SFP_PLUS_CU; 1257 break; 1258 case IXGBE_DEV_ID_82598AF_DUAL_PORT: 1259 case IXGBE_DEV_ID_82598AF_SINGLE_PORT: 1260 case IXGBE_DEV_ID_82598_SR_DUAL_PORT_EM: 1261 physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_SR; 1262 break; 1263 case IXGBE_DEV_ID_82598EB_XF_LR: 1264 physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_LR; 1265 break; 1266 default: 1267 break; 1268 } 1269 1270 out: 1271 return physical_layer; 1272 } 1273 1274 /** 1275 * ixgbe_set_lan_id_multi_port_pcie_82598 - Set LAN id for PCIe multiple 1276 * port devices. 1277 * @hw: pointer to the HW structure 1278 * 1279 * Calls common function and corrects issue with some single port devices 1280 * that enable LAN1 but not LAN0. 1281 **/ 1282 void ixgbe_set_lan_id_multi_port_pcie_82598(struct ixgbe_hw *hw) 1283 { 1284 struct ixgbe_bus_info *bus = &hw->bus; 1285 u16 pci_gen = 0; 1286 u16 pci_ctrl2 = 0; 1287 1288 DEBUGFUNC("ixgbe_set_lan_id_multi_port_pcie_82598"); 1289 1290 ixgbe_set_lan_id_multi_port_pcie(hw); 1291 1292 /* check if LAN0 is disabled */ 1293 hw->eeprom.ops.read(hw, IXGBE_PCIE_GENERAL_PTR, &pci_gen); 1294 if ((pci_gen != 0) && (pci_gen != 0xFFFF)) { 1295 1296 hw->eeprom.ops.read(hw, pci_gen + IXGBE_PCIE_CTRL2, &pci_ctrl2); 1297 1298 /* if LAN0 is completely disabled force function to 0 */ 1299 if ((pci_ctrl2 & IXGBE_PCIE_CTRL2_LAN_DISABLE) && 1300 !(pci_ctrl2 & IXGBE_PCIE_CTRL2_DISABLE_SELECT) && 1301 !(pci_ctrl2 & IXGBE_PCIE_CTRL2_DUMMY_ENABLE)) { 1302 1303 bus->func = 0; 1304 } 1305 } 1306 } 1307 1308 /** 1309 * ixgbe_enable_relaxed_ordering_82598 - enable relaxed ordering 1310 * @hw: pointer to hardware structure 1311 * 1312 **/ 1313 void ixgbe_enable_relaxed_ordering_82598(struct ixgbe_hw *hw) 1314 { 1315 u32 regval; 1316 u32 i; 1317 1318 DEBUGFUNC("ixgbe_enable_relaxed_ordering_82598"); 1319 1320 /* Enable relaxed ordering */ 1321 for (i = 0; ((i < hw->mac.max_tx_queues) && 1322 (i < IXGBE_DCA_MAX_QUEUES_82598)); i++) { 1323 regval = IXGBE_READ_REG(hw, IXGBE_DCA_TXCTRL(i)); 1324 regval |= IXGBE_DCA_TXCTRL_DESC_WRO_EN; 1325 IXGBE_WRITE_REG(hw, IXGBE_DCA_TXCTRL(i), regval); 1326 } 1327 1328 for (i = 0; ((i < hw->mac.max_rx_queues) && 1329 (i < IXGBE_DCA_MAX_QUEUES_82598)); i++) { 1330 regval = IXGBE_READ_REG(hw, IXGBE_DCA_RXCTRL(i)); 1331 regval |= IXGBE_DCA_RXCTRL_DATA_WRO_EN | 1332 IXGBE_DCA_RXCTRL_HEAD_WRO_EN; 1333 IXGBE_WRITE_REG(hw, IXGBE_DCA_RXCTRL(i), regval); 1334 } 1335 1336 } 1337 1338 /** 1339 * ixgbe_set_rxpba_82598 - Initialize RX packet buffer 1340 * @hw: pointer to hardware structure 1341 * @num_pb: number of packet buffers to allocate 1342 * @headroom: reserve n KB of headroom 1343 * @strategy: packet buffer allocation strategy 1344 **/ 1345 static void ixgbe_set_rxpba_82598(struct ixgbe_hw *hw, int num_pb, 1346 u32 headroom, int strategy) 1347 { 1348 u32 rxpktsize = IXGBE_RXPBSIZE_64KB; 1349 u8 i = 0; 1350 UNREFERENCED_1PARAMETER(headroom); 1351 1352 if (!num_pb) 1353 return; 1354 1355 /* Setup Rx packet buffer sizes */ 1356 switch (strategy) { 1357 case PBA_STRATEGY_WEIGHTED: 1358 /* Setup the first four at 80KB */ 1359 rxpktsize = IXGBE_RXPBSIZE_80KB; 1360 for (; i < 4; i++) 1361 IXGBE_WRITE_REG(hw, IXGBE_RXPBSIZE(i), rxpktsize); 1362 /* Setup the last four at 48KB...don't re-init i */ 1363 rxpktsize = IXGBE_RXPBSIZE_48KB; 1364 /* Fall Through */ 1365 /* FALLTHRU */ 1366 case PBA_STRATEGY_EQUAL: 1367 default: 1368 /* Divide the remaining Rx packet buffer evenly among the TCs */ 1369 for (; i < IXGBE_MAX_PACKET_BUFFERS; i++) 1370 IXGBE_WRITE_REG(hw, IXGBE_RXPBSIZE(i), rxpktsize); 1371 break; 1372 } 1373 1374 /* Setup Tx packet buffer sizes */ 1375 for (i = 0; i < IXGBE_MAX_PACKET_BUFFERS; i++) 1376 IXGBE_WRITE_REG(hw, IXGBE_TXPBSIZE(i), IXGBE_TXPBSIZE_40KB); 1377 } 1378