xref: /illumos-gate/usr/src/cmd/sgs/libld/common/map_core.c (revision b531f6d16eb39863e7bbc34773fb7ef7a282a0a2)
1 /*
2  * CDDL HEADER START
3  *
4  * The contents of this file are subject to the terms of the
5  * Common Development and Distribution License (the "License").
6  * You may not use this file except in compliance with the License.
7  *
8  * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
9  * or http://www.opensolaris.org/os/licensing.
10  * See the License for the specific language governing permissions
11  * and limitations under the License.
12  *
13  * When distributing Covered Code, include this CDDL HEADER in each
14  * file and include the License file at usr/src/OPENSOLARIS.LICENSE.
15  * If applicable, add the following below this CDDL HEADER, with the
16  * fields enclosed by brackets "[]" replaced with your own identifying
17  * information: Portions Copyright [yyyy] [name of copyright owner]
18  *
19  * CDDL HEADER END
20  */
21 
22 /*
23  *	Copyright (c) 1988 AT&T
24  *	  All Rights Reserved
25  *
26  * Copyright (c) 2010, Oracle and/or its affiliates. All rights reserved.
27  *
28  * Copyright 2019 Joyent, Inc.
29  */
30 
31 /*
32  * Map file parsing (Shared Core Code).
33  */
34 #include	<fcntl.h>
35 #include	<stdio.h>
36 #include	<unistd.h>
37 #include	<sys/stat.h>
38 #include	<errno.h>
39 #include	<limits.h>
40 #include	<dirent.h>
41 #include	<ctype.h>
42 #include	<debug.h>
43 #include	"msg.h"
44 #include	"_libld.h"
45 #include	"_map.h"
46 
47 /*
48  * There are two styles of mapfile supported by the link-editor:
49  *
50  * 1)	The original System V defined syntax, as augmented at Sun
51  *	from Solaris 2.0 through Solaris 10. This style is also known
52  *	as version 1.
53  *
54  * 2)	A newer syntax, currently at version 2.
55  *
56  * The original syntax uses special characters (=, :, -, |, etc) as
57  * operators to indicate the operation being specified. Over the years,
58  * this syntax has been problematic:
59  *
60  * 1)	Too cryptic: It's hard for people to remember which character
61  *	means what.
62  *
63  * 2)	Limited expansion potential: There only a few special characters
64  *	available on the keyboard for new features, and it is difficult to
65  *	add options to existing ones.
66  *
67  * Adding new features into this framework (2) have the effect of
68  * making the syntax even more cryptic (1). The newer syntax addresses
69  * these issues by moving to an extendible identifier based syntax that
70  * allows new features to be added without complicating old ones.
71  *
72  * The new syntax uses the following terminology:
73  *
74  * -	Control directives are the directives that start with a '$'.
75  *	They control how the mapfile is interpreted. We use the 'cdir_'
76  *	prefix on functions and variables related to these directives.
77  *
78  * -	Conditional Expressions are the expressions found in $if and $elif
79  *	control directives. They evaluate to boolean true/false values.
80  *	We use the 'cexp_' prefix for functions and variables related to
81  *	these expressions.
82  *
83  * -	Regular Directives are names (SYMBOL, VERSION, etc) that convey
84  *	directions to the link-editor for building the output object.
85  *
86  * This file contains core code used by both mapfile styles: File management,
87  * lexical analysis, and other shared core functionality. It also contains
88  * the code for control directives, as they are intrinsically part of
89  * lexical analysis --- this is disabled when processing Sysv mapfiles.
90  */
91 
92 /*
93  * We use a stack of cdir_level_t structs to manage $if/$elif/$else/$endif
94  * processing. At each level, we keep track of the information needed to
95  * determine whether or not to process nested input lines or skip them,
96  * along with information needed to report errors.
97  */
98 typedef struct {
99 	Lineno		cdl_if_lineno;	/* Line number of opening $if */
100 	Lineno		cdl_else_lineno; /* 0, or line on which $else seen */
101 	int		cdl_done;	/* True if no longer accepts input */
102 	int		cdl_pass;	/* True if currently accepting input */
103 } cdir_level_t;
104 
105 /* Operators in the expressions accepted by $if/$elif */
106 typedef enum {
107 	CEXP_OP_NONE,		/* Not an operator */
108 	CEXP_OP_AND,		/* && */
109 	CEXP_OP_OR,		/* || */
110 	CEXP_OP_NEG,		/* ! */
111 	CEXP_OP_OPAR,		/* ( */
112 	CEXP_OP_CPAR		/* ) */
113 } cexp_op_t;
114 
115 /*
116  * Type of conditional expression identifier AVL tree nodes
117  */
118 typedef struct cexp_name_node {
119 	avl_node_t	ceid_avlnode;	/* AVL book-keeping */
120 	const char	*ceid_name;	/* boolean identifier name */
121 } cexp_id_node_t;
122 
123 
124 /*
125  * Declare a "stack" type, containing a pointer to data, a count of
126  * allocated, and currently used items in the stack. The data type
127  * is specified as the _type argument.
128  */
129 #define	STACK(_type) \
130 	struct { \
131 		_type	*stk_s;		/* Stack array */ \
132 		size_t	stk_n;		/* Current stack depth */ \
133 		size_t	stk_n_alloc;	/* # of elements pointed at by s */ \
134 	}
135 
136 /*
137  * The following type represents a "generic" stack, where the data
138  * type is (void). This type is never instantiated. However, it has
139  * the same struct layout as any other STACK(), and is therefore a good
140  * generic type that can be used for stack_resize().
141  */
142 typedef STACK(void) generic_stack_t;
143 
144 /*
145  * Ensure that the stack has enough room to push one more item
146  */
147 #define	STACK_RESERVE(_stack, _n_default) \
148 	(((_stack).stk_n < (_stack).stk_n_alloc) || \
149 	stack_resize((generic_stack_t *)&(_stack).stk_s, _n_default, \
150 	sizeof (*(_stack).stk_s)))
151 
152 /*
153  * Reset a stack to empty.
154  */
155 #define	STACK_RESET(_stack) (_stack).stk_n = 0;
156 
157 /*
158  * True if stack is empty, False otherwise.
159  */
160 #define	STACK_IS_EMPTY(_stack) ((_stack).stk_n == 0)
161 
162 /*
163  * Push a value onto a stack. Caller must ensure that stack has room.
164  * This macro is intended to be used as the LHS of an assignment, the
165  * RHS of which is the value:
166  *
167  *	STACK_PUSH(stack) = value;
168  */
169 #define	STACK_PUSH(_stack) (_stack).stk_s[(_stack).stk_n++]
170 
171 /*
172  * Pop a value off a stack.  Caller must ensure
173  * that stack is not empty.
174  */
175 #define	STACK_POP(_stack) ((_stack).stk_s[--(_stack).stk_n])
176 
177 /*
178  * Access top element on stack without popping. Caller must ensure
179  * that stack is not empty.
180  */
181 #define	STACK_TOP(_stack) (((_stack).stk_s)[(_stack).stk_n - 1])
182 
183 /*
184  * Initial sizes used for the stacks: The stacks are allocated on demand
185  * to these sizes, and then doubled as necessary until they are large enough.
186  *
187  * The ideal size would be large enough that only a single allocation
188  * occurs, and our defaults should generally have that effect. However,
189  * in doing so, we run the risk of a latent error in the resize code going
190  * undetected until triggered by a large task in the field. For this reason,
191  * we set the sizes to the smallest size possible when compiled for debug.
192  */
193 #ifdef DEBUG
194 #define	CDIR_STACK_INIT		1
195 #define	CEXP_OP_STACK_INIT	1
196 #define	CEXP_VAL_STACK_INIT	1
197 #else
198 #define	CDIR_STACK_INIT 	16
199 #define	CEXP_OP_STACK_INIT	8
200 #define	CEXP_VAL_STACK_INIT	(CEXP_OP_STACK_INIT * 2) /* 2 vals per binop */
201 #endif
202 
203 
204 /*
205  * Persistent state maintained by map module in between calls.
206  *
207  * This is kept as static file scope data, because it is only used
208  * when libld is called by ld, and not by rtld. If that should change,
209  * the code is designed so that it can become reentrant easily:
210  *
211  * -	Add a pointer to the output descriptor to a structure of this type,
212  *	allocated dynamically on the first call to ld_map_parse().
213  * -	Change all references to lms to instead reference the pointer in
214  *	the output descriptor.
215  *
216  * Until then, it is simpler not to expose these details.
217  */
218 typedef struct {
219 	int	lms_cdir_valid;	/* Allow control dir. on entry to gettoken() */
220 	STACK(cdir_level_t)	lms_cdir_stack;	/* Conditional input level */
221 	STACK(cexp_op_t)	lms_cexp_op_stack; /* Cond. expr operators */
222 	STACK(uchar_t)		lms_cexp_val_stack; /* Cond. expr values */
223 	avl_tree_t		*lms_cexp_id;
224 } ld_map_state_t;
225 static ld_map_state_t lms;
226 
227 
228 /*
229  * Version 1 (SysV) syntax dispatch table for ld_map_gettoken(). For each
230  * of the 7-bit ASCII characters, determine how the lexical analyzer
231  * should behave.
232  *
233  * This table must be kept in sync with tkid_attr[] below.
234  *
235  * Identifier Note:
236  * The Linker and Libraries Guide states that the original syntax uses
237  * C identifier rules, allowing '.' to be treated as a letter. However,
238  * the implementation is considerably looser than that: Any character
239  * with an ASCII code (0-127) which is printable and not used to start
240  * another token is allowed to start an identifier, and they are terminated
241  * by any of: space, double quote, tab, newline, ':', ';', '=', or '#'.
242  * The original code has been replaced, but this table encodes the same
243  * rules, to ensure backward compatibility.
244  */
245 static const mf_tokdisp_t gettok_dispatch_v1 = {
246 	TK_OP_EOF,			/* 0 - NUL */
247 	TK_OP_ILLCHR,			/* 1 - SOH */
248 	TK_OP_ILLCHR,			/* 2 - STX */
249 	TK_OP_ILLCHR,			/* 3 - ETX */
250 	TK_OP_ILLCHR,			/* 4 - EOT */
251 	TK_OP_ILLCHR,			/* 5 - ENQ */
252 	TK_OP_ILLCHR,			/* 6 - ACK */
253 	TK_OP_ILLCHR,			/* 7 - BEL */
254 	TK_OP_ILLCHR,			/* 8 - BS */
255 	TK_OP_WS,			/* 9 - HT */
256 	TK_OP_NL,			/* 10 - NL */
257 	TK_OP_WS,			/* 11 - VT */
258 	TK_OP_WS,			/* 12 - FF */
259 	TK_OP_WS,			/* 13 - CR */
260 	TK_OP_ILLCHR,			/* 14 - SO */
261 	TK_OP_ILLCHR,			/* 15 - SI */
262 	TK_OP_ILLCHR,			/* 16 - DLE */
263 	TK_OP_ILLCHR,			/* 17 - DC1 */
264 	TK_OP_ILLCHR,			/* 18 - DC2 */
265 	TK_OP_ILLCHR,			/* 19 - DC3 */
266 	TK_OP_ILLCHR,			/* 20 - DC4 */
267 	TK_OP_ILLCHR,			/* 21 - NAK */
268 	TK_OP_ILLCHR,			/* 22 - SYN */
269 	TK_OP_ILLCHR,			/* 23 - ETB */
270 	TK_OP_ILLCHR,			/* 24 - CAN */
271 	TK_OP_ILLCHR,			/* 25 - EM */
272 	TK_OP_ILLCHR,			/* 26 - SUB */
273 	TK_OP_ILLCHR,			/* 27 - ESC */
274 	TK_OP_ILLCHR,			/* 28 - FS */
275 	TK_OP_ILLCHR,			/* 29 - GS */
276 	TK_OP_ILLCHR,			/* 30 - RS */
277 	TK_OP_ILLCHR,			/* 31 - US */
278 	TK_OP_WS,			/* 32 - SP */
279 	TK_OP_ID,			/* 33 - ! */
280 	TK_OP_SIMQUOTE,			/* 34 - " */
281 	TK_OP_CMT,			/* 35 - # */
282 	TK_OP_ID,			/* 36 - $ */
283 	TK_OP_ID,			/* 37 - % */
284 	TK_OP_ID,			/* 38 - & */
285 	TK_OP_ID,			/* 39 - ' */
286 	TK_OP_ID,			/* 40 - ( */
287 	TK_OP_ID,			/* 41 - ) */
288 	TK_OP_ID,			/* 42 - * */
289 	TK_OP_ID,			/* 43 - + */
290 	TK_OP_ID,			/* 44 - , */
291 	TK_DASH,			/* 45 - - */
292 	TK_OP_ID,			/* 46 - . */
293 	TK_OP_ID,			/* 47 - / */
294 	TK_OP_ID,			/* 48 - 0 */
295 	TK_OP_ID,			/* 49 - 1 */
296 	TK_OP_ID,			/* 50 - 2 */
297 	TK_OP_ID,			/* 51 - 3 */
298 	TK_OP_ID,			/* 52 - 4 */
299 	TK_OP_ID,			/* 53 - 5 */
300 	TK_OP_ID,			/* 54 - 6 */
301 	TK_OP_ID,			/* 55 - 7 */
302 	TK_OP_ID,			/* 56 - 8 */
303 	TK_OP_ID,			/* 57 - 9 */
304 	TK_COLON,			/* 58 - : */
305 	TK_SEMICOLON,			/* 59 - ; */
306 	TK_OP_ID,			/* 60 - < */
307 	TK_EQUAL,			/* 61 - = */
308 	TK_OP_ID,			/* 62 - > */
309 	TK_OP_ID,			/* 63 - ? */
310 	TK_ATSIGN,			/* 64 - @ */
311 	TK_OP_ID,			/* 65 - A */
312 	TK_OP_ID,			/* 66 - B */
313 	TK_OP_ID,			/* 67 - C */
314 	TK_OP_ID,			/* 68 - D */
315 	TK_OP_ID,			/* 69 - E */
316 	TK_OP_ID,			/* 70 - F */
317 	TK_OP_ID,			/* 71 - G */
318 	TK_OP_ID,			/* 72 - H */
319 	TK_OP_ID,			/* 73 - I */
320 	TK_OP_ID,			/* 74 - J */
321 	TK_OP_ID,			/* 75 - K */
322 	TK_OP_ID,			/* 76 - L */
323 	TK_OP_ID,			/* 77 - M */
324 	TK_OP_ID,			/* 78 - N */
325 	TK_OP_ID,			/* 79 - O */
326 	TK_OP_ID,			/* 80 - P */
327 	TK_OP_ID,			/* 81 - Q */
328 	TK_OP_ID,			/* 82 - R */
329 	TK_OP_ID,			/* 83 - S */
330 	TK_OP_ID,			/* 84 - T */
331 	TK_OP_ID,			/* 85 - U */
332 	TK_OP_ID,			/* 86 - V */
333 	TK_OP_ID,			/* 87 - W */
334 	TK_OP_ID,			/* 88 - X */
335 	TK_OP_ID,			/* 89 - Y */
336 	TK_OP_ID,			/* 90 - Z */
337 	TK_OP_ID,			/* 91 - [ */
338 	TK_OP_ID,			/* 92 - \ */
339 	TK_OP_ID,			/* 93 - ] */
340 	TK_OP_ID,			/* 94 - ^ */
341 	TK_OP_ID,			/* 95 - _ */
342 	TK_OP_ID,			/* 96 - ` */
343 	TK_OP_ID,			/* 97 - a */
344 	TK_OP_ID,			/* 98 - b */
345 	TK_OP_ID,			/* 99 - c */
346 	TK_OP_ID,			/* 100 - d */
347 	TK_OP_ID,			/* 101 - e */
348 	TK_OP_ID,			/* 102 - f */
349 	TK_OP_ID,			/* 103 - g */
350 	TK_OP_ID,			/* 104 - h */
351 	TK_OP_ID,			/* 105 - i */
352 	TK_OP_ID,			/* 106 - j */
353 	TK_OP_ID,			/* 107 - k */
354 	TK_OP_ID,			/* 108 - l */
355 	TK_OP_ID,			/* 109 - m */
356 	TK_OP_ID,			/* 110 - n */
357 	TK_OP_ID,			/* 111 - o */
358 	TK_OP_ID,			/* 112 - p */
359 	TK_OP_ID,			/* 113 - q */
360 	TK_OP_ID,			/* 114 - r */
361 	TK_OP_ID,			/* 115 - s */
362 	TK_OP_ID,			/* 116 - t */
363 	TK_OP_ID,			/* 117 - u */
364 	TK_OP_ID,			/* 118 - v */
365 	TK_OP_ID,			/* 119 - w */
366 	TK_OP_ID,			/* 120 - x */
367 	TK_OP_ID,			/* 121 - y */
368 	TK_OP_ID,			/* 122 - z */
369 	TK_LEFTBKT,			/* 123 - { */
370 	TK_PIPE,			/* 124 - | */
371 	TK_RIGHTBKT,			/* 125 - } */
372 	TK_OP_ID,			/* 126 - ~ */
373 	TK_OP_ILLCHR,			/* 127 - DEL */
374 };
375 
376 /*
377  * Version 2 syntax dispatch table for ld_map_gettoken(). For each of the
378  * 7-bit ASCII characters, determine how the lexical analyzer should behave.
379  *
380  * This table must be kept in sync with tkid_attr[] below.
381  *
382  * Identifier Note:
383  * We define a letter as being one of the character [A-Z], [a-z], or [_%/.]
384  * A digit is the numbers [0-9], or [$-]. An unquoted identifier is defined
385  * as a letter, followed by any number of letters or digits. This is a loosened
386  * version of the C definition of an identifier. The extra characters not
387  * allowed by C are common in section names and/or file paths.
388  */
389 static const mf_tokdisp_t gettok_dispatch_v2 = {
390 	TK_OP_EOF,			/* 0 - NUL */
391 	TK_OP_ILLCHR,			/* 1 - SOH */
392 	TK_OP_ILLCHR,			/* 2 - STX */
393 	TK_OP_ILLCHR,			/* 3 - ETX */
394 	TK_OP_ILLCHR,			/* 4 - EOT */
395 	TK_OP_ILLCHR,			/* 5 - ENQ */
396 	TK_OP_ILLCHR,			/* 6 - ACK */
397 	TK_OP_ILLCHR,			/* 7 - BEL */
398 	TK_OP_ILLCHR,			/* 8 - BS */
399 	TK_OP_WS,			/* 9 - HT */
400 	TK_OP_NL,			/* 10 - NL */
401 	TK_OP_WS,			/* 11 - VT */
402 	TK_OP_WS,			/* 12 - FF */
403 	TK_OP_WS,			/* 13 - CR */
404 	TK_OP_ILLCHR,			/* 14 - SO */
405 	TK_OP_ILLCHR,			/* 15 - SI */
406 	TK_OP_ILLCHR,			/* 16 - DLE */
407 	TK_OP_ILLCHR,			/* 17 - DC1 */
408 	TK_OP_ILLCHR,			/* 18 - DC2 */
409 	TK_OP_ILLCHR,			/* 19 - DC3 */
410 	TK_OP_ILLCHR,			/* 20 - DC4 */
411 	TK_OP_ILLCHR,			/* 21 - NAK */
412 	TK_OP_ILLCHR,			/* 22 - SYN */
413 	TK_OP_ILLCHR,			/* 23 - ETB */
414 	TK_OP_ILLCHR,			/* 24 - CAN */
415 	TK_OP_ILLCHR,			/* 25 - EM */
416 	TK_OP_ILLCHR,			/* 26 - SUB */
417 	TK_OP_ILLCHR,			/* 27 - ESC */
418 	TK_OP_ILLCHR,			/* 28 - FS */
419 	TK_OP_ILLCHR,			/* 29 - GS */
420 	TK_OP_ILLCHR,			/* 30 - RS */
421 	TK_OP_ILLCHR,			/* 31 - US */
422 	TK_OP_WS,			/* 32 - SP */
423 	TK_BANG,			/* 33 - ! */
424 	TK_OP_CQUOTE,			/* 34 - " */
425 	TK_OP_CMT,			/* 35 - # */
426 	TK_OP_CDIR,			/* 36 - $ */
427 	TK_OP_ID,			/* 37 - % */
428 	TK_OP_BADCHR,			/* 38 - & */
429 	TK_OP_SIMQUOTE,			/* 39 - ' */
430 	TK_OP_BADCHR,			/* 40 - ( */
431 	TK_OP_BADCHR,			/* 41 - ) */
432 	TK_STAR,			/* 42 - * */
433 	TK_OP_CEQUAL,			/* 43 - + */
434 	TK_OP_BADCHR,			/* 44 - , */
435 	TK_OP_CEQUAL,			/* 45 - - */
436 	TK_OP_ID,			/* 46 - . */
437 	TK_OP_ID,			/* 47 - / */
438 	TK_OP_NUM,			/* 48 - 0 */
439 	TK_OP_NUM,			/* 49 - 1 */
440 	TK_OP_NUM,			/* 50 - 2 */
441 	TK_OP_NUM,			/* 51 - 3 */
442 	TK_OP_NUM,			/* 52 - 4 */
443 	TK_OP_NUM,			/* 53 - 5 */
444 	TK_OP_NUM,			/* 54 - 6 */
445 	TK_OP_NUM,			/* 55 - 7 */
446 	TK_OP_NUM,			/* 56 - 8 */
447 	TK_OP_NUM,			/* 57 - 9 */
448 	TK_COLON,			/* 58 - : */
449 	TK_SEMICOLON,			/* 59 - ; */
450 	TK_OP_BADCHR,			/* 60 - < */
451 	TK_EQUAL,			/* 61 - = */
452 	TK_OP_BADCHR,			/* 62 - > */
453 	TK_OP_BADCHR,			/* 63 - ? */
454 	TK_OP_BADCHR,			/* 64 - @ */
455 	TK_OP_ID,			/* 65 - A */
456 	TK_OP_ID,			/* 66 - B */
457 	TK_OP_ID,			/* 67 - C */
458 	TK_OP_ID,			/* 68 - D */
459 	TK_OP_ID,			/* 69 - E */
460 	TK_OP_ID,			/* 70 - F */
461 	TK_OP_ID,			/* 71 - G */
462 	TK_OP_ID,			/* 72 - H */
463 	TK_OP_ID,			/* 73 - I */
464 	TK_OP_ID,			/* 74 - J */
465 	TK_OP_ID,			/* 75 - K */
466 	TK_OP_ID,			/* 76 - L */
467 	TK_OP_ID,			/* 77 - M */
468 	TK_OP_ID,			/* 78 - N */
469 	TK_OP_ID,			/* 79 - O */
470 	TK_OP_ID,			/* 80 - P */
471 	TK_OP_ID,			/* 81 - Q */
472 	TK_OP_ID,			/* 82 - R */
473 	TK_OP_ID,			/* 83 - S */
474 	TK_OP_ID,			/* 84 - T */
475 	TK_OP_ID,			/* 85 - U */
476 	TK_OP_ID,			/* 86 - V */
477 	TK_OP_ID,			/* 87 - W */
478 	TK_OP_ID,			/* 88 - X */
479 	TK_OP_ID,			/* 89 - Y */
480 	TK_OP_ID,			/* 90 - Z */
481 	TK_OP_BADCHR,			/* 91 - [ */
482 	TK_OP_BADCHR,			/* 92 - \ */
483 	TK_OP_BADCHR,			/* 93 - ] */
484 	TK_OP_BADCHR,			/* 94 - ^ */
485 	TK_OP_ID,			/* 95 - _ */
486 	TK_OP_BADCHR,			/* 96 - ` */
487 	TK_OP_ID,			/* 97 - a */
488 	TK_OP_ID,			/* 98 - b */
489 	TK_OP_ID,			/* 99 - c */
490 	TK_OP_ID,			/* 100 - d */
491 	TK_OP_ID,			/* 101 - e */
492 	TK_OP_ID,			/* 102 - f */
493 	TK_OP_ID,			/* 103 - g */
494 	TK_OP_ID,			/* 104 - h */
495 	TK_OP_ID,			/* 105 - i */
496 	TK_OP_ID,			/* 106 - j */
497 	TK_OP_ID,			/* 107 - k */
498 	TK_OP_ID,			/* 108 - l */
499 	TK_OP_ID,			/* 109 - m */
500 	TK_OP_ID,			/* 110 - n */
501 	TK_OP_ID,			/* 111 - o */
502 	TK_OP_ID,			/* 112 - p */
503 	TK_OP_ID,			/* 113 - q */
504 	TK_OP_ID,			/* 114 - r */
505 	TK_OP_ID,			/* 115 - s */
506 	TK_OP_ID,			/* 116 - t */
507 	TK_OP_ID,			/* 117 - u */
508 	TK_OP_ID,			/* 118 - v */
509 	TK_OP_ID,			/* 119 - w */
510 	TK_OP_ID,			/* 120 - x */
511 	TK_OP_ID,			/* 121 - y */
512 	TK_OP_ID,			/* 122 - z */
513 	TK_LEFTBKT,			/* 123 - { */
514 	TK_OP_BADCHR,			/* 124 - | */
515 	TK_RIGHTBKT,			/* 125 - } */
516 	TK_OP_BADCHR,			/* 126 - ~ */
517 	TK_OP_ILLCHR,			/* 127 - DEL */
518 };
519 
520 
521 /*
522  * Table used to identify unquoted identifiers. Each element of this array
523  * contains a bitmask indicating whether the character it represents starts,
524  * or continues an identifier, for each supported mapfile syntax version.
525  */
526 static const char tkid_attr[128] = {
527 	0,					/* 0 - NUL */
528 	TKID_ATTR_CONT(1),			/* 1 - SOH */
529 	TKID_ATTR_CONT(1),			/* 2 - STX */
530 	TKID_ATTR_CONT(1),			/* 3 - ETX */
531 	TKID_ATTR_CONT(1),			/* 4 - EOT */
532 	TKID_ATTR_CONT(1),			/* 5 - ENQ */
533 	TKID_ATTR_CONT(1),			/* 6 - ACK */
534 	TKID_ATTR_CONT(1),			/* 7 - BEL */
535 	TKID_ATTR_CONT(1),			/* 8 - BS */
536 	0,					/* 9 - HT */
537 	0,					/* 10 - NL */
538 	TKID_ATTR_CONT(1),			/* 11 - VT */
539 	TKID_ATTR_CONT(1),			/* 12 - FF */
540 	TKID_ATTR_CONT(1),			/* 13 - CR */
541 	TKID_ATTR_CONT(1),			/* 14 - SO */
542 	TKID_ATTR_CONT(1),			/* 15 - SI */
543 	TKID_ATTR_CONT(1),			/* 16 - DLE */
544 	TKID_ATTR_CONT(1),			/* 17 - DC1 */
545 	TKID_ATTR_CONT(1),			/* 18 - DC2 */
546 	TKID_ATTR_CONT(1),			/* 19 - DC3 */
547 	TKID_ATTR_CONT(1),			/* 20 - DC4 */
548 	TKID_ATTR_CONT(1),			/* 21 - NAK */
549 	TKID_ATTR_CONT(1),			/* 22 - SYN */
550 	TKID_ATTR_CONT(1),			/* 23 - ETB */
551 	TKID_ATTR_CONT(1),			/* 24 - CAN */
552 	TKID_ATTR_CONT(1),			/* 25 - EM */
553 	TKID_ATTR_CONT(1),			/* 26 - SUB */
554 	TKID_ATTR_CONT(1),			/* 27 - ESC */
555 	TKID_ATTR_CONT(1),			/* 28 - FS */
556 	TKID_ATTR_CONT(1),			/* 29 - GS */
557 	TKID_ATTR_CONT(1),			/* 30 - RS */
558 	TKID_ATTR_CONT(1),			/* 31 - US */
559 	0,					/* 32 - SP */
560 	TKID_ATTR(1),				/* 33 - ! */
561 	0,					/* 34 - " */
562 	0,					/* 35 - # */
563 	TKID_ATTR(1) | TKID_ATTR_CONT(2),	/* 36 - $ */
564 	TKID_ATTR(1) | TKID_ATTR_CONT(2),	/* 37 - % */
565 	TKID_ATTR(1),				/* 38 - & */
566 	TKID_ATTR(1),				/* 39 - ' */
567 	TKID_ATTR(1),				/* 40 - ( */
568 	TKID_ATTR(1),				/* 41 - ) */
569 	TKID_ATTR(1),				/* 42 - * */
570 	TKID_ATTR(1),				/* 43 - + */
571 	TKID_ATTR(1),				/* 44 - , */
572 	TKID_ATTR_CONT(1) | TKID_ATTR_CONT(2),	/* 45 - - */
573 	TKID_ATTR(1) | TKID_ATTR(2),		/* 46 - . */
574 	TKID_ATTR(1) | TKID_ATTR(2),		/* 47 - / */
575 	TKID_ATTR(1) | TKID_ATTR_CONT(2),	/* 48 - 0 */
576 	TKID_ATTR(1) | TKID_ATTR_CONT(2),	/* 49 - 1 */
577 	TKID_ATTR(1) | TKID_ATTR_CONT(2),	/* 50 - 2 */
578 	TKID_ATTR(1) | TKID_ATTR_CONT(2),	/* 51 - 3 */
579 	TKID_ATTR(1) | TKID_ATTR_CONT(2),	/* 52 - 4 */
580 	TKID_ATTR(1) | TKID_ATTR_CONT(2),	/* 53 - 5 */
581 	TKID_ATTR(1) | TKID_ATTR_CONT(2),	/* 54 - 6 */
582 	TKID_ATTR(1) | TKID_ATTR_CONT(2),	/* 55 - 7 */
583 	TKID_ATTR(1) | TKID_ATTR_CONT(2),	/* 56 - 8 */
584 	TKID_ATTR(1) | TKID_ATTR_CONT(2),	/* 57 - 9 */
585 	0,					/* 58 - : */
586 	0,					/* 59 - ; */
587 	TKID_ATTR(1),				/* 60 - < */
588 	0,					/* 61 - = */
589 	TKID_ATTR(1),				/* 62 - > */
590 	TKID_ATTR(1),				/* 63 - ? */
591 	TKID_ATTR_CONT(1),			/* 64 - @ */
592 	TKID_ATTR(1) | TKID_ATTR(2),		/* 65 - A */
593 	TKID_ATTR(1) | TKID_ATTR(2),		/* 66 - B */
594 	TKID_ATTR(1) | TKID_ATTR(2),		/* 67 - C */
595 	TKID_ATTR(1) | TKID_ATTR(2),		/* 68 - D */
596 	TKID_ATTR(1) | TKID_ATTR(2),		/* 69 - E */
597 	TKID_ATTR(1) | TKID_ATTR(2),		/* 70 - F */
598 	TKID_ATTR(1) | TKID_ATTR(2),		/* 71 - G */
599 	TKID_ATTR(1) | TKID_ATTR(2),		/* 72 - H */
600 	TKID_ATTR(1) | TKID_ATTR(2),		/* 73 - I */
601 	TKID_ATTR(1) | TKID_ATTR(2),		/* 74 - J */
602 	TKID_ATTR(1) | TKID_ATTR(2),		/* 75 - K */
603 	TKID_ATTR(1) | TKID_ATTR(2),		/* 76 - L */
604 	TKID_ATTR(1) | TKID_ATTR(2),		/* 77 - M */
605 	TKID_ATTR(1) | TKID_ATTR(2),		/* 78 - N */
606 	TKID_ATTR(1) | TKID_ATTR(2),		/* 79 - O */
607 	TKID_ATTR(1) | TKID_ATTR(2),		/* 80 - P */
608 	TKID_ATTR(1) | TKID_ATTR(2),		/* 81 - Q */
609 	TKID_ATTR(1) | TKID_ATTR(2),		/* 82 - R */
610 	TKID_ATTR(1) | TKID_ATTR(2),		/* 83 - S */
611 	TKID_ATTR(1) | TKID_ATTR(2),		/* 84 - T */
612 	TKID_ATTR(1) | TKID_ATTR(2),		/* 85 - U */
613 	TKID_ATTR(1) | TKID_ATTR(2),		/* 86 - V */
614 	TKID_ATTR(1) | TKID_ATTR(2),		/* 87 - W */
615 	TKID_ATTR(1) | TKID_ATTR(2),		/* 88 - X */
616 	TKID_ATTR(1) | TKID_ATTR(2),		/* 89 - Y */
617 	TKID_ATTR(1) | TKID_ATTR(2),		/* 90 - Z */
618 	TKID_ATTR(1),				/* 91 - [ */
619 	TKID_ATTR(1),				/* 92 - \ */
620 	TKID_ATTR(1),				/* 93 - ] */
621 	TKID_ATTR(1),				/* 94 - ^ */
622 	TKID_ATTR(1) | TKID_ATTR(2),		/* 95 - _ */
623 	TKID_ATTR(1),				/* 96 - ` */
624 	TKID_ATTR(1) | TKID_ATTR(2),		/* 97 - a */
625 	TKID_ATTR(1) | TKID_ATTR(2),		/* 98 - b */
626 	TKID_ATTR(1) | TKID_ATTR(2),		/* 99 - c */
627 	TKID_ATTR(1) | TKID_ATTR(2),		/* 100 - d */
628 	TKID_ATTR(1) | TKID_ATTR(2),		/* 101 - e */
629 	TKID_ATTR(1) | TKID_ATTR(2),		/* 102 - f */
630 	TKID_ATTR(1) | TKID_ATTR(2),		/* 103 - g */
631 	TKID_ATTR(1) | TKID_ATTR(2),		/* 104 - h */
632 	TKID_ATTR(1) | TKID_ATTR(2),		/* 105 - i */
633 	TKID_ATTR(1) | TKID_ATTR(2),		/* 106 - j */
634 	TKID_ATTR(1) | TKID_ATTR(2),		/* 107 - k */
635 	TKID_ATTR(1) | TKID_ATTR(2),		/* 108 - l */
636 	TKID_ATTR(1) | TKID_ATTR(2),		/* 109 - m */
637 	TKID_ATTR(1) | TKID_ATTR(2),		/* 110 - n */
638 	TKID_ATTR(1) | TKID_ATTR(2),		/* 111 - o */
639 	TKID_ATTR(1) | TKID_ATTR(2),		/* 112 - p */
640 	TKID_ATTR(1) | TKID_ATTR(2),		/* 113 - q */
641 	TKID_ATTR(1) | TKID_ATTR(2),		/* 114 - r */
642 	TKID_ATTR(1) | TKID_ATTR(2),		/* 115 - s */
643 	TKID_ATTR(1) | TKID_ATTR(2),		/* 116 - t */
644 	TKID_ATTR(1) | TKID_ATTR(2),		/* 117 - u */
645 	TKID_ATTR(1) | TKID_ATTR(2),		/* 118 - v */
646 	TKID_ATTR(1) | TKID_ATTR(2),		/* 119 - w */
647 	TKID_ATTR(1) | TKID_ATTR(2),		/* 120 - x */
648 	TKID_ATTR(1) | TKID_ATTR(2),		/* 121 - y */
649 	TKID_ATTR(1) | TKID_ATTR(2),		/* 122 - z */
650 	TKID_ATTR_CONT(1),			/* 123 - { */
651 	TKID_ATTR_CONT(1),			/* 124 - | */
652 	TKID_ATTR_CONT(1),			/* 125 - } */
653 	TKID_ATTR(1),				/* 126 - ~ */
654 	TKID_ATTR_CONT(1),			/* 127 - DEL */
655 };
656 
657 
658 /*
659  * Advance the given string pointer to the next newline character,
660  * or the terminating NULL if there is none.
661  */
662 inline static void
663 advance_to_eol(char **str)
664 {
665 	char	*s = *str;
666 
667 	while ((*s != '\n') && (*s != '\0'))
668 		s++;
669 	*str = s;
670 }
671 
672 /*
673  * Insert a NULL patch at the given address
674  */
675 inline static void
676 null_patch_set(char *str, ld_map_npatch_t *np)
677 {
678 	np->np_ptr = str;
679 	np->np_ch = *str;
680 	*str = '\0';
681 }
682 
683 /*
684  * Undo a NULL patch
685  */
686 inline static void
687 null_patch_undo(ld_map_npatch_t *np)
688 {
689 	*np->np_ptr = np->np_ch;
690 }
691 
692 /*
693  * Insert a NULL patch at the end of the line containing str.
694  */
695 static void
696 null_patch_eol(char *str, ld_map_npatch_t *np)
697 {
698 	advance_to_eol(&str);
699 	null_patch_set(str, np);
700 }
701 
702 /*
703  * Locate the end of an unquoted identifier.
704  *
705  * entry:
706  *	mf - Mapfile descriptor, positioned to first character
707  *		of identifier.
708  *
709  * exit:
710  *	If the item pointed at by mf is not an identifier, returns NULL.
711  *	Otherwise, returns pointer to character after the last character
712  *	of the identifier.
713  */
714 inline static char *
715 ident_delimit(Mapfile *mf)
716 {
717 	char		*str = mf->mf_next;
718 	ld_map_npatch_t	np;
719 	int		c = *str++;
720 
721 	/* If not a valid start character, report the error */
722 	if ((c & 0x80) || !(tkid_attr[c] & mf->mf_tkid_start)) {
723 		null_patch_set(str, &np);
724 		mf_fatal(mf, MSG_INTL(MSG_MAP_BADCHAR), str);
725 		null_patch_undo(&np);
726 		return (NULL);
727 	}
728 
729 	/* Keep going until we hit a non-continuing character */
730 	for (c = *str; !(c & 0x80) && (tkid_attr[c] & mf->mf_tkid_cont);
731 	    c = *++str)
732 		;
733 
734 	return (str);
735 }
736 
737 /*
738  * Allocate memory for a stack.
739  *
740  * entry:
741  *	stack - Pointer to stack for which memory is required, cast
742  *		to the generic stack type.
743  *	n_default - Size to use for initial allocation.
744  *	elt_size - sizeof(elt), where elt is the actual stack data type.
745  *
746  * exit:
747  *	Returns (1) on success. On error (memory allocation), a message
748  *	is printed and False (0) is returned.
749  *
750  * note:
751  *	The caller casts the pointer to their actual datatype-specific stack
752  *	to be a (generic_stack_t *). The C language will give all stack
753  *	structs the same size and layout as long as the underlying platform
754  *	uses a single integral type for pointers. Hence, this cast is safe,
755  *	and lets a generic routine modify data-specific types without being
756  *	aware of those types.
757  */
758 static Boolean
759 stack_resize(generic_stack_t *stack, size_t n_default, size_t elt_size)
760 {
761 	size_t	new_n_alloc;
762 	void	*newaddr;
763 
764 	/* Use initial size first, and double the allocation on each call */
765 	new_n_alloc = (stack->stk_n_alloc == 0) ?
766 	    n_default : (stack->stk_n_alloc * 2);
767 
768 	newaddr = libld_realloc(stack->stk_s, new_n_alloc * elt_size);
769 	if (newaddr == NULL)
770 		return (FALSE);
771 
772 	stack->stk_s = newaddr;
773 	stack->stk_n_alloc = new_n_alloc;
774 	return (TRUE);
775 }
776 
777 /*
778  * AVL comparison function for cexp_id_node_t items.
779  *
780  * entry:
781  *      n1, n2 - pointers to nodes to be compared
782  *
783  * exit:
784  *      Returns -1 if (n1 < n2), 0 if they are equal, and 1 if (n1 > n2)
785  */
786 static int
787 cexp_ident_cmp(const void *n1, const void *n2)
788 {
789 	int	rc;
790 
791 	rc = strcmp(((cexp_id_node_t *)n1)->ceid_name,
792 	    ((cexp_id_node_t *)n2)->ceid_name);
793 
794 	if (rc > 0)
795 		return (1);
796 	if (rc < 0)
797 		return (-1);
798 	return (0);
799 }
800 
801 
802 /*
803  * Returns True (1) if name is in the conditional expression identifier
804  * AVL tree, and False (0) otherwise.
805  */
806 static int
807 cexp_ident_test(const char *name)
808 {
809 	cexp_id_node_t	node;
810 
811 	node.ceid_name = name;
812 	return (avl_find(lms.lms_cexp_id, &node, 0) != NULL);
813 }
814 
815 /*
816  * Add a new boolean identifier to the conditional expression identifier
817  * AVL tree.
818  *
819  * entry:
820  *	mf - If non-NULL, the mapfile descriptor for the mapfile
821  *		containing the $add directive. NULL if this is an
822  *		initialization call.
823  *	name - Name of identifier. Must point at stable storage that will
824  *		not be moved or modified by the caller following this call.
825  *
826  * exit:
827  *	On success, True (1) is returned and name has been entered.
828  *	On failure, False (0) is returned and an error has been printed.
829  */
830 static int
831 cexp_ident_add(Mapfile *mf, const char *name)
832 {
833 	cexp_id_node_t	*node;
834 
835 	if (mf != NULL) {
836 		DBG_CALL(Dbg_map_cexp_id(mf->mf_ofl->ofl_lml, 1,
837 		    mf->mf_name, mf->mf_lineno, name));
838 
839 		/* If is already known, don't do it again */
840 		if (cexp_ident_test(name))
841 			return (1);
842 	}
843 
844 	if ((node = libld_calloc(sizeof (*node), 1)) == NULL)
845 		return (0);
846 	node->ceid_name = name;
847 	avl_add(lms.lms_cexp_id, node);
848 	return (1);
849 }
850 
851 /*
852  * Remove a boolean identifier from the conditional expression identifier
853  * AVL tree.
854  *
855  * entry:
856  *	mf - Mapfile descriptor
857  *	name - Name of identifier.
858  *
859  * exit:
860  *	If the name was in the tree, it has been removed. If not,
861  *	then this routine quietly returns.
862  */
863 static void
864 cexp_ident_clear(Mapfile *mf, const char *name)
865 {
866 	cexp_id_node_t	node;
867 	cexp_id_node_t	*real_node;
868 
869 	DBG_CALL(Dbg_map_cexp_id(mf->mf_ofl->ofl_lml, 0,
870 	    mf->mf_name, mf->mf_lineno, name));
871 
872 	node.ceid_name = name;
873 	real_node = avl_find(lms.lms_cexp_id, &node, 0);
874 	if (real_node != NULL)
875 		avl_remove(lms.lms_cexp_id, real_node);
876 }
877 
878 /*
879  * Initialize the AVL tree that holds the names of the currently defined
880  * boolean identifiers for conditional expressions ($if/$elif).
881  *
882  * entry:
883  *	ofl - Output file descriptor
884  *
885  * exit:
886  *	On success, TRUE (1) is returned and lms.lms_cexp_id is ready for use.
887  *	On failure, FALSE (0) is returned.
888  */
889 static Boolean
890 cexp_ident_init(void)
891 {
892 	/* If already done, use it */
893 	if (lms.lms_cexp_id != NULL)
894 		return (TRUE);
895 
896 	lms.lms_cexp_id = libld_calloc(sizeof (*lms.lms_cexp_id), 1);
897 	if (lms.lms_cexp_id == NULL)
898 		return (FALSE);
899 	avl_create(lms.lms_cexp_id, cexp_ident_cmp, sizeof (cexp_id_node_t),
900 	    SGSOFFSETOF(cexp_id_node_t, ceid_avlnode));
901 
902 
903 	/* ELFCLASS */
904 	if (cexp_ident_add(NULL, (ld_targ.t_m.m_class == ELFCLASS32) ?
905 	    MSG_ORIG(MSG_STR_UELF32) : MSG_ORIG(MSG_STR_UELF64)) == 0)
906 		return (FALSE);
907 
908 	/* Machine */
909 	switch (ld_targ.t_m.m_mach) {
910 	case EM_386:
911 	case EM_AMD64:
912 		if (cexp_ident_add(NULL, MSG_ORIG(MSG_STR_UX86)) == 0)
913 			return (FALSE);
914 		break;
915 
916 	case EM_SPARC:
917 	case EM_SPARCV9:
918 		if (cexp_ident_add(NULL, MSG_ORIG(MSG_STR_USPARC)) == 0)
919 			return (FALSE);
920 		break;
921 	}
922 
923 	/* true is always defined */
924 	if (cexp_ident_add(NULL, MSG_ORIG(MSG_STR_TRUE)) == 0)
925 		return (FALSE);
926 
927 	return (TRUE);
928 }
929 
930 /*
931  * Validate the string starting at mf->mf_next as being a
932  * boolean conditional expression identifier.
933  *
934  * entry:
935  *	mf - Mapfile descriptor
936  *	len - NULL, or address of variable to receive strlen() of identifier
937  *	directive - If (len == NULL), string giving name of directive being
938  *		processed. Ignored if (len != NULL).
939  *
940  * exit:
941  *	On success:
942  *	-	If len is NULL, a NULL is inserted following the final
943  *		character of the identifier, and the remainder of the string
944  *		is tested to ensure it is empty, or only contains whitespace.
945  *	-	If len is non-NULL, *len is set to the number of characters
946  *		in the identifier, and the rest of the string is not modified.
947  *	-	TRUE (1) is returned
948  *
949  *	On failure, returns FALSE (0).
950  */
951 static Boolean
952 cexp_ident_validate(Mapfile *mf, size_t *len, const char *directive)
953 {
954 	char	*tail;
955 
956 	if ((tail = ident_delimit(mf)) == NULL)
957 		return (FALSE);
958 
959 	/*
960 	 * If len is non-NULL, we simple count the number of characters
961 	 * consumed by the identifier and are done. If len is NULL, then
962 	 * ensure there's nothing left but whitespace, and NULL terminate
963 	 * the identifier to remove it.
964 	 */
965 	if (len != NULL) {
966 		*len = tail - mf->mf_next;
967 	} else if (*tail != '\0') {
968 		*tail++ = '\0';
969 		while (isspace(*tail))
970 			tail++;
971 		if (*tail != '\0') {
972 			mf_fatal(mf, MSG_INTL(MSG_MAP_BADEXTRA), directive);
973 			return (FALSE);
974 		}
975 	}
976 
977 	return (TRUE);
978 }
979 
980 /*
981  * Push a new operator onto the conditional expression operator stack.
982  *
983  * entry:
984  *	mf - Mapfile descriptor
985  *	op - Operator to push
986  *
987  * exit:
988  *	On success, TRUE (1) is returned, otherwise FALSE (0).
989  */
990 static Boolean
991 cexp_push_op(cexp_op_t op)
992 {
993 	if (STACK_RESERVE(lms.lms_cexp_op_stack, CEXP_OP_STACK_INIT) == 0)
994 		return (FALSE);
995 
996 	STACK_PUSH(lms.lms_cexp_op_stack) = op;
997 	return (TRUE);
998 }
999 
1000 /*
1001  * Evaluate the basic operator (non-paren) at the top of lms.lms_cexp_op_stack,
1002  * and push the results on lms.lms_cexp_val_stack.
1003  *
1004  * exit:
1005  *	On success, returns TRUE (1). On error, FALSE (0) is returned,
1006  *	and the caller is responsible for issuing the error.
1007  */
1008 static Boolean
1009 cexp_eval_op(void)
1010 {
1011 	cexp_op_t	op;
1012 	uchar_t		val;
1013 
1014 	op = STACK_POP(lms.lms_cexp_op_stack);
1015 	switch (op) {
1016 	case CEXP_OP_AND:
1017 		if (lms.lms_cexp_val_stack.stk_n < 2)
1018 			return (FALSE);
1019 		val = STACK_POP(lms.lms_cexp_val_stack);
1020 		STACK_TOP(lms.lms_cexp_val_stack) = val &&
1021 		    STACK_TOP(lms.lms_cexp_val_stack);
1022 		break;
1023 
1024 	case CEXP_OP_OR:
1025 		if (lms.lms_cexp_val_stack.stk_n < 2)
1026 			return (FALSE);
1027 		val = STACK_POP(lms.lms_cexp_val_stack);
1028 		STACK_TOP(lms.lms_cexp_val_stack) = val ||
1029 		    STACK_TOP(lms.lms_cexp_val_stack);
1030 		break;
1031 
1032 	case CEXP_OP_NEG:
1033 		if (lms.lms_cexp_val_stack.stk_n < 1)
1034 			return (FALSE);
1035 		STACK_TOP(lms.lms_cexp_val_stack) =
1036 		    !STACK_TOP(lms.lms_cexp_val_stack);
1037 		break;
1038 	default:
1039 		return (FALSE);
1040 	}
1041 
1042 	return (TRUE);
1043 }
1044 
1045 /*
1046  * Evaluate an expression for a $if/$elif control directive.
1047  *
1048  * entry:
1049  *	mf - Mapfile descriptor for NULL terminated string
1050  *		containing the expression.
1051  *
1052  * exit:
1053  *	The contents of str are modified by this routine.
1054  *	One of the following values are returned:
1055  *		-1	Syntax error encountered (an error is printed)
1056  *		0	The expression evaluates to False
1057  *		1	The expression evaluates to True.
1058  *
1059  * note:
1060  *	A simplified version of Dijkstra's Shunting Yard algorithm is used
1061  *	to convert this syntax into postfix form and then evaluate it.
1062  *	Our version has no functions and a tiny set of operators.
1063  *
1064  *	The expressions consist of boolean identifiers, which can be
1065  *	combined using the following operators, listed from highest
1066  *	precedence to least:
1067  *
1068  *		Operator	Meaning
1069  *		-------------------------------------------------
1070  *		(expr)		sub-expression, non-associative
1071  *		!		logical negation, prefix, left associative
1072  *		&&  ||		logical and/or, binary, left associative
1073  *
1074  *	The operands manipulated by these operators are names, consisting of
1075  *	a sequence of letters and digits. The first character must be a letter.
1076  *	Underscore (_) and period (.) are also considered to be characters.
1077  *	An operand is considered True if it is found in our set of known
1078  *	names (lms.lms_cexp_id), and False otherwise.
1079  *
1080  *	The Shunting Yard algorithm works using two stacks, one for operators,
1081  *	and a second for operands. The infix input expression is tokenized from
1082  *	left to right and processed in order. Issues of associativity and
1083  *	precedence are managed by reducing (poping and evaluating) items with
1084  *	higer precedence before pushing additional tokens with lower precedence.
1085  */
1086 static int
1087 cexp_eval_expr(Mapfile *mf)
1088 {
1089 	char		*ident;
1090 	size_t		len;
1091 	cexp_op_t	new_op = CEXP_OP_AND;	/* to catch binop at start */
1092 	ld_map_npatch_t	np;
1093 	char		*str = mf->mf_next;
1094 
1095 	STACK_RESET(lms.lms_cexp_op_stack);
1096 	STACK_RESET(lms.lms_cexp_val_stack);
1097 
1098 	for (; *str; str++) {
1099 
1100 		/* Skip whitespace */
1101 		while (isspace(*str))
1102 			str++;
1103 		if (!*str)
1104 			break;
1105 
1106 		switch (*str) {
1107 		case '&':
1108 		case '|':
1109 			if (*(str + 1) != *str)
1110 				goto token_error;
1111 			if ((new_op != CEXP_OP_NONE) &&
1112 			    (new_op != CEXP_OP_CPAR)) {
1113 				mf_fatal0(mf, MSG_INTL(MSG_MAP_CEXP_BADOPUSE));
1114 				return (-1);
1115 			}
1116 			str++;
1117 
1118 			/*
1119 			 * As this is a left associative binary operator, we
1120 			 * need to process all operators of equal or higher
1121 			 * precedence before pushing the new operator.
1122 			 */
1123 			while (!STACK_IS_EMPTY(lms.lms_cexp_op_stack)) {
1124 				cexp_op_t op = STACK_TOP(lms.lms_cexp_op_stack);
1125 
1126 
1127 				if ((op != CEXP_OP_AND) && (op != CEXP_OP_OR) &&
1128 				    (op != CEXP_OP_NEG))
1129 					break;
1130 
1131 				if (!cexp_eval_op())
1132 					goto semantic_error;
1133 			}
1134 
1135 			new_op = (*str == '&') ? CEXP_OP_AND : CEXP_OP_OR;
1136 			if (!cexp_push_op(new_op))
1137 				return (-1);
1138 			break;
1139 
1140 		case '!':
1141 			new_op = CEXP_OP_NEG;
1142 			if (!cexp_push_op(new_op))
1143 				return (-1);
1144 			break;
1145 
1146 		case '(':
1147 			new_op = CEXP_OP_OPAR;
1148 			if (!cexp_push_op(new_op))
1149 				return (-1);
1150 			break;
1151 
1152 		case ')':
1153 			new_op = CEXP_OP_CPAR;
1154 
1155 			/* Evaluate the operator stack until reach '(' */
1156 			while (!STACK_IS_EMPTY(lms.lms_cexp_op_stack) &&
1157 			    (STACK_TOP(lms.lms_cexp_op_stack) != CEXP_OP_OPAR))
1158 				if (!cexp_eval_op())
1159 					goto semantic_error;
1160 
1161 			/*
1162 			 * If the top of operator stack is not an open paren,
1163 			 * when we have an error. In this case, the operator
1164 			 * stack will be empty due to the loop above.
1165 			 */
1166 			if (STACK_IS_EMPTY(lms.lms_cexp_op_stack))
1167 				goto unbalpar_error;
1168 			lms.lms_cexp_op_stack.stk_n--;   /* Pop OPAR */
1169 			break;
1170 
1171 		default:
1172 			/* Ensure there's room to push another operand */
1173 			if (STACK_RESERVE(lms.lms_cexp_val_stack,
1174 			    CEXP_VAL_STACK_INIT) == 0)
1175 				return (0);
1176 			new_op = CEXP_OP_NONE;
1177 
1178 			/*
1179 			 * Operands cannot be numbers. However, we accept two
1180 			 * special cases: '0' means false, and '1' is true.
1181 			 * This is done to support the common C idiom of
1182 			 * '#if 1' and '#if 0' to conditionalize code under
1183 			 * development.
1184 			 */
1185 			if ((*str == '0') || (*str == '1')) {
1186 				STACK_PUSH(lms.lms_cexp_val_stack) =
1187 				    (*str == '1');
1188 				break;
1189 			}
1190 
1191 			/* Look up the identifier */
1192 			ident = mf->mf_next = str;
1193 			if (!cexp_ident_validate(mf, &len, NULL))
1194 				return (-1);
1195 			str += len - 1;	  /* loop will advance past final ch */
1196 			null_patch_set(&ident[len], &np);
1197 			STACK_PUSH(lms.lms_cexp_val_stack) =
1198 			    cexp_ident_test(ident);
1199 			null_patch_undo(&np);
1200 
1201 			break;
1202 		}
1203 	}
1204 
1205 	/* Evaluate the operator stack until empty */
1206 	while (!STACK_IS_EMPTY(lms.lms_cexp_op_stack)) {
1207 		if (STACK_TOP(lms.lms_cexp_op_stack) == CEXP_OP_OPAR)
1208 			goto unbalpar_error;
1209 
1210 		if (!cexp_eval_op())
1211 			goto semantic_error;
1212 	}
1213 
1214 	/* There should be exactly one value left */
1215 	if (lms.lms_cexp_val_stack.stk_n != 1)
1216 		goto semantic_error;
1217 
1218 	/* Final value is the result */
1219 	return (lms.lms_cexp_val_stack.stk_s[0]);
1220 
1221 	/* Errors issued more than once are handled below, accessed via goto */
1222 
1223 token_error:			/* unexpected characters in input stream */
1224 	mf_fatal(mf, MSG_INTL(MSG_MAP_CEXP_TOKERR), str);
1225 	return (-1);
1226 
1227 semantic_error:			/* valid tokens, but in invalid arrangement */
1228 	mf_fatal0(mf, MSG_INTL(MSG_MAP_CEXP_SEMERR));
1229 	return (-1);
1230 
1231 unbalpar_error:			/* Extra or missing parenthesis */
1232 	mf_fatal0(mf, MSG_INTL(MSG_MAP_CEXP_UNBALPAR));
1233 	return (-1);
1234 }
1235 
1236 /*
1237  * Process a mapfile control directive. These directives start with
1238  * the dollar character, and are used to manage details of the mapfile
1239  * itself, such as version and conditional input.
1240  *
1241  * entry:
1242  *	mf - Mapfile descriptor
1243  *
1244  * exit:
1245  *	Returns TRUE (1) for success, and FALSE (0) on error. In the
1246  *	error case, a descriptive error is issued.
1247  */
1248 static Boolean
1249 cdir_process(Mapfile *mf)
1250 {
1251 	typedef enum {			/* Directive types */
1252 		CDIR_T_UNKNOWN = 0,	/* Unrecognized control directive */
1253 		CDIR_T_ADD,		/* $add */
1254 		CDIR_T_CLEAR,		/* $clear */
1255 		CDIR_T_ERROR,		/* $error */
1256 		CDIR_T_VERSION,		/* $mapfile_version */
1257 		CDIR_T_IF,		/* $if */
1258 		CDIR_T_ELIF,		/* $elif */
1259 		CDIR_T_ELSE,		/* $else */
1260 		CDIR_T_ENDIF,		/* $endif */
1261 	} cdir_t;
1262 
1263 	typedef enum {		/* Types of arguments accepted by directives */
1264 		ARG_T_NONE,	/* Directive takes no arguments */
1265 		ARG_T_EXPR,	/* Directive takes a conditional expression */
1266 		ARG_T_ID,	/* Conditional expression identifier */
1267 		ARG_T_STR,	/* Non-empty string */
1268 		ARG_T_IGN	/* Ignore the argument */
1269 	} cdir_arg_t;
1270 
1271 	typedef struct {
1272 		const char	*md_name;	/* Directive name */
1273 		size_t		md_size;	/* strlen(md_name) */
1274 		cdir_arg_t	md_arg;		/* Type of arguments */
1275 		cdir_t		md_op;		/* CDIR_T_ code */
1276 	} cdir_match_t;
1277 
1278 	/* Control Directives: The most likely items are listed first */
1279 	static cdir_match_t match_data[] = {
1280 		{ MSG_ORIG(MSG_STR_CDIR_IF),	MSG_STR_CDIR_IF_SIZE,
1281 		    ARG_T_EXPR,			CDIR_T_IF },
1282 		{ MSG_ORIG(MSG_STR_CDIR_ENDIF),	MSG_STR_CDIR_ENDIF_SIZE,
1283 		    ARG_T_NONE,			CDIR_T_ENDIF },
1284 		{ MSG_ORIG(MSG_STR_CDIR_ELSE),	MSG_STR_CDIR_ELSE_SIZE,
1285 		    ARG_T_NONE,			CDIR_T_ELSE },
1286 		{ MSG_ORIG(MSG_STR_CDIR_ELIF),	MSG_STR_CDIR_ELIF_SIZE,
1287 		    ARG_T_EXPR,			CDIR_T_ELIF },
1288 		{ MSG_ORIG(MSG_STR_CDIR_ERROR),	MSG_STR_CDIR_ERROR_SIZE,
1289 		    ARG_T_STR,			CDIR_T_ERROR },
1290 		{ MSG_ORIG(MSG_STR_CDIR_ADD),	MSG_STR_CDIR_ADD_SIZE,
1291 		    ARG_T_ID,			CDIR_T_ADD },
1292 		{ MSG_ORIG(MSG_STR_CDIR_CLEAR),	MSG_STR_CDIR_CLEAR_SIZE,
1293 		    ARG_T_ID,			CDIR_T_CLEAR },
1294 		{ MSG_ORIG(MSG_STR_CDIR_MFVER),	MSG_STR_CDIR_MFVER_SIZE,
1295 		    ARG_T_IGN,			CDIR_T_VERSION },
1296 
1297 		{ NULL,				0,
1298 		    ARG_T_IGN,			CDIR_T_UNKNOWN }
1299 	};
1300 
1301 	cdir_match_t	*mdptr;
1302 	char		*tail;
1303 	int		expr_eval;	/* Result of evaluating ARG_T_EXPR */
1304 	Mapfile		arg_mf;
1305 	cdir_level_t	*level;
1306 	int		pass, parent_pass;	/* Currently accepting input */
1307 
1308 restart:
1309 	/* Is the immediate context passing input? */
1310 	pass = STACK_IS_EMPTY(lms.lms_cdir_stack) ||
1311 	    STACK_TOP(lms.lms_cdir_stack).cdl_pass;
1312 
1313 	/* Is the surrounding (parent) context passing input? */
1314 	parent_pass = (lms.lms_cdir_stack.stk_n <= 1) ||
1315 	    lms.lms_cdir_stack.stk_s[lms.lms_cdir_stack.stk_n - 2].cdl_pass;
1316 
1317 
1318 	for (mdptr = match_data; mdptr->md_name; mdptr++) {
1319 		/* Prefix must match, or we move on */
1320 		if (strncmp(mf->mf_next, mdptr->md_name,
1321 		    mdptr->md_size) != 0)
1322 			continue;
1323 		tail = mf->mf_next + mdptr->md_size;
1324 
1325 		/*
1326 		 * If there isn't whitespace, or a NULL terminator following
1327 		 * the prefix, then even though our prefix matched, the actual
1328 		 * token is longer, and we don't have a match.
1329 		 */
1330 		if (!isspace(*tail) && (*tail != '\0'))
1331 			continue;
1332 
1333 		/* We have matched a valid control directive */
1334 		break;
1335 	}
1336 
1337 	/* Advance input to end of the current line */
1338 	advance_to_eol(&mf->mf_next);
1339 
1340 	/*
1341 	 * Set up a temporary mapfile descriptor to reference the
1342 	 * argument string. The benefit of this second block, is that
1343 	 * we can advance the real one to the next line now, which allows
1344 	 * us to return at any time knowing that the input has been moved
1345 	 * to the proper spot. This simplifies the error cases.
1346 	 *
1347 	 * If we had a match, tail points at the start of the string.
1348 	 * Otherwise, we want to point at the end of the line.
1349 	 */
1350 	arg_mf = *mf;
1351 	if (mdptr->md_name == NULL)
1352 		arg_mf.mf_text = arg_mf.mf_next;
1353 	else
1354 		arg_mf.mf_text = arg_mf.mf_next = tail;
1355 
1356 	/*
1357 	 * Null terminate the arguments, and advance the main mapfile
1358 	 * state block to the next line.
1359 	 */
1360 	if (*mf->mf_next == '\n') {
1361 		*mf->mf_next++ = '\0';
1362 		mf->mf_lineno++;
1363 	}
1364 
1365 	/* Skip leading whitespace to arguments */
1366 	while (isspace(*arg_mf.mf_next))
1367 		arg_mf.mf_next++;
1368 
1369 	/* Strip off any comment present on the line */
1370 	for (tail = arg_mf.mf_next; *tail; tail++)
1371 		if (*tail == '#') {
1372 			*tail = '\0';
1373 			break;
1374 		}
1375 
1376 	/*
1377 	 * Process the arguments as necessary depending on their type.
1378 	 * If this control directive is nested inside a surrounding context
1379 	 * that is not currently passing text, then we skip the argument
1380 	 * evaluation. This follows the behavior of the C preprocessor,
1381 	 * which only examines enough to detect the operation within
1382 	 * a disabled section, without issuing errors about the arguments.
1383 	 */
1384 	if (pass || (parent_pass && (mdptr->md_op == CDIR_T_ELIF))) {
1385 		switch (mdptr->md_arg) {
1386 		case ARG_T_NONE:
1387 			if (*arg_mf.mf_next == '\0')
1388 				break;
1389 			/* Args are present, but not wanted */
1390 			mf_fatal(&arg_mf, MSG_INTL(MSG_MAP_CDIR_REQNOARG),
1391 			    mdptr->md_name);
1392 			return (FALSE);
1393 
1394 		case ARG_T_EXPR:
1395 			/* Ensure that arguments are present */
1396 			if (*arg_mf.mf_next == '\0')
1397 				goto error_reqarg;
1398 			expr_eval = cexp_eval_expr(&arg_mf);
1399 			if (expr_eval == -1)
1400 				return (FALSE);
1401 			break;
1402 
1403 		case ARG_T_ID:
1404 			/* Ensure that arguments are present */
1405 			if (*arg_mf.mf_next == '\0')
1406 				goto error_reqarg;
1407 			if (!cexp_ident_validate(&arg_mf, NULL,
1408 			    mdptr->md_name))
1409 				return (FALSE);
1410 			break;
1411 
1412 		case ARG_T_STR:
1413 			/* Ensure that arguments are present */
1414 			if (*arg_mf.mf_next == '\0')
1415 				goto error_reqarg;
1416 			/* Remove trailing whitespace */
1417 			tail = arg_mf.mf_next + strlen(arg_mf.mf_next);
1418 			while ((tail > arg_mf.mf_next) &&
1419 			    isspace(*(tail -1)))
1420 				tail--;
1421 			*tail = '\0';
1422 			break;
1423 		}
1424 	}
1425 
1426 	/*
1427 	 * Carry out the specified control directive:
1428 	 */
1429 	if (!STACK_IS_EMPTY(lms.lms_cdir_stack))
1430 		level = &STACK_TOP(lms.lms_cdir_stack);
1431 
1432 	switch (mdptr->md_op) {
1433 	case CDIR_T_UNKNOWN:		/* Unrecognized control directive */
1434 		if (!pass)
1435 			break;
1436 		mf_fatal0(&arg_mf, MSG_INTL(MSG_MAP_CDIR_BAD));
1437 		return (FALSE);
1438 
1439 	case CDIR_T_ADD:
1440 		if (pass && !cexp_ident_add(&arg_mf, arg_mf.mf_next))
1441 			return (FALSE);
1442 		break;
1443 
1444 	case CDIR_T_CLEAR:
1445 		if (pass)
1446 			cexp_ident_clear(&arg_mf, arg_mf.mf_next);
1447 		break;
1448 
1449 	case CDIR_T_ERROR:
1450 		if (!pass)
1451 			break;
1452 		mf_fatal(&arg_mf, MSG_INTL(MSG_MAP_CDIR_ERROR),
1453 		    arg_mf.mf_next);
1454 		return (FALSE);
1455 
1456 	case CDIR_T_VERSION:
1457 		/*
1458 		 * A $mapfile_version control directive can only appear
1459 		 * as the first directive in a mapfile, and is used to
1460 		 * determine the syntax for the rest of the file. It's
1461 		 * too late to be using it here.
1462 		 */
1463 		if (!pass)
1464 			break;
1465 		mf_fatal0(&arg_mf, MSG_INTL(MSG_MAP_CDIR_REPVER));
1466 		return (FALSE);
1467 
1468 	case CDIR_T_IF:
1469 		/* Push a new level on the conditional input stack */
1470 		if (STACK_RESERVE(lms.lms_cdir_stack, CDIR_STACK_INIT) == 0)
1471 			return (FALSE);
1472 		level = &lms.lms_cdir_stack.stk_s[lms.lms_cdir_stack.stk_n++];
1473 		level->cdl_if_lineno = arg_mf.mf_lineno;
1474 		level->cdl_else_lineno = 0;
1475 
1476 		/*
1477 		 * If previous level is not passing, this level is disabled.
1478 		 * Otherwise, the expression value determines what happens.
1479 		 */
1480 		if (pass) {
1481 			level->cdl_done = level->cdl_pass = expr_eval;
1482 		} else {
1483 			level->cdl_done = 1;
1484 			level->cdl_pass = 0;
1485 		}
1486 		break;
1487 
1488 	case CDIR_T_ELIF:
1489 		/* $elif requires an open $if construct */
1490 		if (STACK_IS_EMPTY(lms.lms_cdir_stack)) {
1491 			mf_fatal(&arg_mf, MSG_INTL(MSG_MAP_CDIR_NOIF),
1492 			    MSG_ORIG(MSG_STR_CDIR_ELIF));
1493 			return (FALSE);
1494 		}
1495 
1496 		/* $elif cannot follow $else */
1497 		if (level->cdl_else_lineno > 0) {
1498 			mf_fatal(&arg_mf, MSG_INTL(MSG_MAP_CDIR_ELSE),
1499 			    MSG_ORIG(MSG_STR_CDIR_ELIF),
1500 			    EC_LINENO(level->cdl_else_lineno));
1501 			return (FALSE);
1502 		}
1503 
1504 		/*
1505 		 * Accept text from $elif if the level isn't already
1506 		 * done and the expression evaluates to true.
1507 		 */
1508 		level->cdl_pass = !level->cdl_done && expr_eval;
1509 		if (level->cdl_pass)
1510 			level->cdl_done = 1;
1511 		break;
1512 
1513 	case CDIR_T_ELSE:
1514 		/* $else requires an open $if construct */
1515 		if (STACK_IS_EMPTY(lms.lms_cdir_stack)) {
1516 			mf_fatal(&arg_mf, MSG_INTL(MSG_MAP_CDIR_NOIF),
1517 			    MSG_ORIG(MSG_STR_CDIR_ELSE));
1518 			return (FALSE);
1519 		}
1520 
1521 		/* There can only be one $else in the chain */
1522 		if (level->cdl_else_lineno > 0) {
1523 			mf_fatal(&arg_mf, MSG_INTL(MSG_MAP_CDIR_ELSE),
1524 			    MSG_ORIG(MSG_STR_CDIR_ELSE),
1525 			    EC_LINENO(level->cdl_else_lineno));
1526 			return (FALSE);
1527 		}
1528 		level->cdl_else_lineno = arg_mf.mf_lineno;
1529 
1530 		/* Accept text from $else if the level isn't already done */
1531 		level->cdl_pass = !level->cdl_done;
1532 		level->cdl_done = 1;
1533 		break;
1534 
1535 	case CDIR_T_ENDIF:
1536 		/* $endif requires an open $if construct */
1537 		if (STACK_IS_EMPTY(lms.lms_cdir_stack)) {
1538 			mf_fatal(&arg_mf, MSG_INTL(MSG_MAP_CDIR_NOIF),
1539 			    MSG_ORIG(MSG_STR_CDIR_ENDIF));
1540 			return (FALSE);
1541 		}
1542 		if (--lms.lms_cdir_stack.stk_n > 0)
1543 			level = &STACK_TOP(lms.lms_cdir_stack);
1544 		break;
1545 
1546 	default:
1547 		return (FALSE);
1548 	}
1549 
1550 	/* Evaluating the control directive above can change pass status */
1551 	expr_eval = STACK_IS_EMPTY(lms.lms_cdir_stack) ||
1552 	    STACK_TOP(lms.lms_cdir_stack).cdl_pass;
1553 	if (expr_eval != pass) {
1554 		pass = expr_eval;
1555 		DBG_CALL(Dbg_map_pass(arg_mf.mf_ofl->ofl_lml, pass,
1556 		    arg_mf.mf_name, arg_mf.mf_lineno, mdptr->md_name));
1557 	}
1558 
1559 	/*
1560 	 * At this point, we have processed a control directive,
1561 	 * updated our conditional state stack, and the input is
1562 	 * positioned at the start of the line following the directive.
1563 	 * If the current level is accepting input, then give control
1564 	 * back to ld_map_gettoken() to resume its normal operation.
1565 	 */
1566 	if (pass)
1567 		return (TRUE);
1568 
1569 	/*
1570 	 * The current level is not accepting input. Only another
1571 	 * control directive can change this, so read and discard input
1572 	 * until we encounter one of the following:
1573 	 *
1574 	 * EOF:			Return and let ld_map_gettoken() report it
1575 	 * Control Directive:	Restart this function / evaluate new directive
1576 	 */
1577 	while (*mf->mf_next != '\0') {
1578 		/* Skip leading whitespace */
1579 		while (isspace_nonl(*mf->mf_next))
1580 			mf->mf_next++;
1581 
1582 		/*
1583 		 * Control directives start with a '$'. If we hit
1584 		 * one, restart the function at this point
1585 		 */
1586 		if (*mf->mf_next == '$')
1587 			goto restart;
1588 
1589 		/* Not a control directive, so advance input to next line */
1590 		advance_to_eol(&mf->mf_next);
1591 		if (*mf->mf_next == '\n') {
1592 			mf->mf_lineno++;
1593 			mf->mf_next++;
1594 		}
1595 	}
1596 
1597 	assert(*mf->mf_next == '\0');
1598 	return (TRUE);
1599 
1600 	/*
1601 	 * Control directives that require an argument that is not present
1602 	 * jump here to report the error and exit.
1603 	 */
1604 error_reqarg:
1605 	mf_fatal(&arg_mf, MSG_INTL(MSG_MAP_CDIR_REQARG), mdptr->md_name);
1606 	return (FALSE);
1607 
1608 }
1609 
1610 #ifndef _ELF64
1611 /*
1612  * Convert a string to lowercase.
1613  */
1614 void
1615 ld_map_lowercase(char *str)
1616 {
1617 	while (*str = tolower(*str))
1618 		str++;
1619 }
1620 #endif
1621 
1622 /*
1623  * Wrappper on strtoul()/strtoull(), adapted to return an Xword.
1624  *
1625  * entry:
1626  *	str - Pointer to string to be converted.
1627  *	endptr - As documented for strtoul(3C). Either NULL, or
1628  *		address of pointer to receive the address of the first
1629  *		unused character in str (called "final" in strtoul(3C)).
1630  *	ret_value - Address of Xword variable to receive result.
1631  *
1632  * exit:
1633  *	On success, *ret_value receives the result, *endptr is updated if
1634  *	endptr is non-NULL, and STRTOXWORD_OK is returned.
1635  *	On failure, STRTOXWORD_TOBIG is returned if an otherwise valid
1636  *	value was too large, and STRTOXWORD_BAD is returned if the string
1637  *	is malformed.
1638  */
1639 ld_map_strtoxword_t
1640 ld_map_strtoxword(const char *restrict str, char **restrict endptr,
1641     Xword *ret_value)
1642 {
1643 #if	defined(_ELF64)			/* _ELF64 */
1644 #define	FUNC		strtoull	/* Function to use */
1645 #define	FUNC_MAX	ULLONG_MAX	/* Largest value returned by FUNC */
1646 #define	XWORD_MAX	ULLONG_MAX	/* Largest Xword value */
1647 	uint64_t	value;		/* Variable of FUNC return type  */
1648 #else					/* _ELF32 */
1649 #define	FUNC		strtoul
1650 #define	FUNC_MAX	ULONG_MAX
1651 #define	XWORD_MAX	UINT_MAX
1652 	ulong_t		value;
1653 #endif
1654 
1655 	char	*endptr_local;		/* Used if endptr is NULL */
1656 
1657 	if (endptr == NULL)
1658 		endptr = &endptr_local;
1659 
1660 	errno = 0;
1661 	value = FUNC(str, endptr, 0);
1662 	if ((errno != 0) || (str == *endptr)) {
1663 		if (value  == FUNC_MAX)
1664 			return (STRTOXWORD_TOOBIG);
1665 		else
1666 			return (STRTOXWORD_BAD);
1667 	}
1668 
1669 	/*
1670 	 * If this is a 64-bit linker building an ELFCLASS32 object,
1671 	 * the FUNC return type is a 64-bit value, while an Xword is
1672 	 * 32-bit. It is possible for FUNC to be able to convert a value
1673 	 * too large for our return type.
1674 	 */
1675 #if FUNC_MAX != XWORD_MAX
1676 	if (value > XWORD_MAX)
1677 		return (STRTOXWORD_TOOBIG);
1678 #endif
1679 
1680 	*ret_value = value;
1681 	return (STRTOXWORD_OK);
1682 
1683 #undef FUNC
1684 #undef FUNC_MAX
1685 #undef XWORD_MAC
1686 }
1687 
1688 /*
1689  * Convert the unsigned integer value at the current mapfile input
1690  * into binary form. All numeric values in mapfiles are treated as
1691  * unsigned integers of the appropriate width for an address on the
1692  * given target. Values can be decimal, hex, or octal.
1693  *
1694  * entry:
1695  *	str - String to process.
1696  *	value - Address of variable to receive resulting value.
1697  *	notail - If TRUE, an error is issued if non-whitespace
1698  *		characters other than '#' (comment) are found following
1699  *		the numeric value before the end of line.
1700  *
1701  * exit:
1702  *	On success:
1703  *		- *str is advanced to the next character following the value
1704  *		- *value receives the value
1705  *		- Returns TRUE (1).
1706  *	On failure, returns FALSE (0).
1707  */
1708 static Boolean
1709 ld_map_getint(Mapfile *mf, ld_map_tkval_t *value, Boolean notail)
1710 {
1711 	ld_map_strtoxword_t	s2xw_ret;
1712 	ld_map_npatch_t	np;
1713 	char		*endptr;
1714 	char		*errstr = mf->mf_next;
1715 
1716 	value->tkv_int.tkvi_str = mf->mf_next;
1717 	s2xw_ret = ld_map_strtoxword(mf->mf_next, &endptr,
1718 	    &value->tkv_int.tkvi_value);
1719 	if (s2xw_ret != STRTOXWORD_OK) {
1720 		null_patch_eol(mf->mf_next, &np);
1721 		if (s2xw_ret == STRTOXWORD_TOOBIG)
1722 			mf_fatal(mf, MSG_INTL(MSG_MAP_VALUELIMIT), errstr);
1723 		else
1724 			mf_fatal(mf, MSG_INTL(MSG_MAP_MALVALUE), errstr);
1725 		null_patch_undo(&np);
1726 		return (FALSE);
1727 	}
1728 
1729 	/* Advance position to item following value, skipping whitespace */
1730 	value->tkv_int.tkvi_cnt = endptr - mf->mf_next;
1731 	mf->mf_next = endptr;
1732 	while (isspace_nonl(*mf->mf_next))
1733 		mf->mf_next++;
1734 
1735 	/* If requested, ensure there's nothing left */
1736 	if (notail && (*mf->mf_next != '\n') && (*mf->mf_next != '#') &&
1737 	    (*mf->mf_next != '\0')) {
1738 		null_patch_eol(mf->mf_next, &np);
1739 		mf_fatal(mf, MSG_INTL(MSG_MAP_BADVALUETAIL), errstr);
1740 		null_patch_undo(&np);
1741 		return (FALSE);
1742 	}
1743 
1744 	return (TRUE);
1745 }
1746 
1747 /*
1748  * Convert a an unquoted identifier into a TK_STRING token, using the
1749  * rules for syntax version in use. Used exclusively by ld_map_gettoken().
1750  *
1751  * entry:
1752  *	mf - Mapfile descriptor, positioned to the first character of
1753  *		the string.
1754  *	flags - Bitmask of options to control ld_map_gettoken()s behavior
1755  *	tkv- Address of pointer to variable to receive token value.
1756  *
1757  * exit:
1758  *	On success, mf is advanced past the token, tkv is updated with
1759  *	the string, and TK_STRING is returned. On error, TK_ERROR is returned.
1760  */
1761 inline static Token
1762 gettoken_ident(Mapfile *mf, int flags, ld_map_tkval_t *tkv)
1763 {
1764 	char	*end;
1765 	Token	tok;
1766 	ld_map_npatch_t	np;
1767 
1768 	tkv->tkv_str = mf->mf_next;
1769 	if ((end = ident_delimit(mf)) == NULL)
1770 		return (TK_ERROR);
1771 	mf->mf_next = end;
1772 
1773 	/*
1774 	 * One advantage of reading the entire mapfile into memory is that
1775 	 * we can access the strings within it without having to allocate
1776 	 * more memory or make copies. In order to do that, we need to NULL
1777 	 * terminate this identifier. That is going to overwrite the
1778 	 * following character. The problem this presents is that the next
1779 	 * character may well be the first character of a subsequent token.
1780 	 * The solution to this is:
1781 	 *
1782 	 * 1)	Disallow the case where the next character is able to
1783 	 *	start a string. This is not legal mapfile syntax anyway,
1784 	 *	so catching it here simplifies matters.
1785 	 * 2)	Copy the character into the special mf->mf_next_ch
1786 	 * 3)	The next call to ld_map_gettoken() checks mf->mf_next_ch,
1787 	 *	and if it is non-0, uses it instead of dereferencing the
1788 	 *	mf_next pointer.
1789 	 */
1790 	tok = (*mf->mf_next & 0x80) ?
1791 	    TK_OP_ILLCHR : mf->mf_tokdisp[*mf->mf_next];
1792 	switch (tok) {
1793 	case TK_OP_BADCHR:
1794 		null_patch_eol(mf->mf_next, &np);
1795 		mf_fatal(mf, MSG_INTL(MSG_MAP_BADCHAR), mf->mf_next);
1796 		null_patch_undo(&np);
1797 		return (TK_ERROR);
1798 
1799 	case TK_OP_SIMQUOTE:
1800 	case TK_OP_CQUOTE:
1801 	case TK_OP_CDIR:
1802 	case TK_OP_NUM:
1803 	case TK_OP_ID:
1804 		null_patch_eol(mf->mf_next, &np);
1805 		mf_fatal(mf, MSG_INTL(MSG_MAP_WSNEEDED), mf->mf_next);
1806 		null_patch_undo(&np);
1807 		return (TK_ERROR);
1808 	}
1809 
1810 	/* Null terminate, saving the replaced character */
1811 	mf->mf_next_ch = *mf->mf_next;
1812 	*mf->mf_next = '\0';
1813 
1814 	if (flags & TK_F_STRLC)
1815 		ld_map_lowercase(tkv->tkv_str);
1816 	return (TK_STRING);
1817 }
1818 
1819 /*
1820  * Convert a quoted string into a TK_STRING token, using simple
1821  * quoting rules:
1822  *	- Start and end quotes must be present and match
1823  *	- There are no special characters or escape sequences.
1824  * This function is used exclusively by ld_map_gettoken().
1825  *
1826  * entry:
1827  *	mf - Mapfile descriptor, positioned to the opening quote character.
1828  *	flags - Bitmask of options to control ld_map_gettoken()s behavior
1829  *	tkv- Address of pointer to variable to receive token value.
1830  *
1831  * exit:
1832  *	On success, mf is advanced past the token, tkv is updated with
1833  *	the string, and TK_STRING is returned. On error, TK_ERROR is returned.
1834  */
1835 inline static Token
1836 gettoken_simquote_str(Mapfile *mf, int flags, ld_map_tkval_t *tkv)
1837 {
1838 	char	*str, *end;
1839 	char	quote;
1840 
1841 	str = mf->mf_next++;
1842 	quote = *str;
1843 	end = mf->mf_next;
1844 	while ((*end != '\0') && (*end != '\n') && (*end != quote))
1845 		end++;
1846 	if (*end != quote) {
1847 		ld_map_npatch_t	np;
1848 
1849 		null_patch_eol(end, &np);
1850 		mf_fatal(mf, MSG_INTL(MSG_MAP_NOTERM), str);
1851 		null_patch_undo(&np);
1852 		return (TK_ERROR);
1853 	}
1854 
1855 	/*
1856 	 * end is pointing at the closing quote. We can turn that into NULL
1857 	 * termination for the string without needing to restore it later.
1858 	 */
1859 	*end = '\0';
1860 	mf->mf_next = end + 1;
1861 	tkv->tkv_str = str + 1;		/* Skip opening quote */
1862 	if (flags & TK_F_STRLC)
1863 		ld_map_lowercase(tkv->tkv_str);
1864 	return (TK_STRING);
1865 }
1866 
1867 /*
1868  * Convert a quoted string into a TK_STRING token, using C string literal
1869  * quoting rules:
1870  *	- Start and end quotes must be present and match
1871  *	- Backslash is an escape, used to introduce  special characters
1872  * This function is used exclusively by ld_map_gettoken().
1873  *
1874  * entry:
1875  *	mf - Mapfile descriptor, positioned to the opening quote character.
1876  *	flags - Bitmask of options to control ld_map_gettoken()s behavior
1877  *	tkv- Address of pointer to variable to receive token value.
1878  *
1879  * exit:
1880  *	On success, mf is advanced past the token, tkv is updated with
1881  *	the string, and TK_STRING is returned. On error, TK_ERROR is returned.
1882  */
1883 inline static Token
1884 gettoken_cquote_str(Mapfile *mf, int flags, ld_map_tkval_t *tkv)
1885 {
1886 	char	*str, *cur, *end;
1887 	char	quote;
1888 	int	c;
1889 
1890 	/*
1891 	 * This function goes through the quoted string and copies
1892 	 * it on top of itself, replacing escape sequences with the
1893 	 * characters they denote. There is always enough room for this,
1894 	 * because escapes are multi-character sequences that are converted
1895 	 * to single character results.
1896 	 */
1897 	str = mf->mf_next++;
1898 	quote = *str;
1899 	cur = end = mf->mf_next;
1900 	for (c = *end++; (c != '\0') && (c != '\n') && (c != quote);
1901 	    c = *end++) {
1902 		if (c == '\\') {
1903 			c = conv_translate_c_esc(&end);
1904 			if (c == -1) {
1905 				mf_fatal(mf, MSG_INTL(MSG_MAP_BADCESC), *end);
1906 				return (TK_ERROR);
1907 			}
1908 		}
1909 		*cur++ = c;
1910 	}
1911 	*cur = '\0';		/* terminate the result */
1912 	if (c != quote) {
1913 		ld_map_npatch_t	np;
1914 
1915 		null_patch_eol(end, &np);
1916 		mf_fatal(mf, MSG_INTL(MSG_MAP_NOTERM), str);
1917 		null_patch_undo(&np);
1918 		return (TK_ERROR);
1919 	}
1920 
1921 	/* end is pointing one character past the closing quote */
1922 	mf->mf_next = end;
1923 	tkv->tkv_str = str + 1;		/* Skip opening quote */
1924 	if (flags & TK_F_STRLC)
1925 		ld_map_lowercase(tkv->tkv_str);
1926 	return (TK_STRING);
1927 }
1928 
1929 /*
1930  * Get a token from the mapfile.
1931  *
1932  * entry:
1933  *	mf - Mapfile descriptor
1934  *	flags - Bitmask of options to control ld_map_gettoken()s behavior
1935  *	tkv- Address of pointer to variable to receive token value.
1936  *
1937  * exit:
1938  *	Returns one of the TK_* values, to report the result. If the resulting
1939  *	token has a value (TK_STRING / TK_INT), and tkv is non-NULL, tkv
1940  *	is filled in with the resulting value.
1941  */
1942 Token
1943 ld_map_gettoken(Mapfile *mf, int flags, ld_map_tkval_t *tkv)
1944 {
1945 	int		cdir_allow, ch;
1946 	Token		tok;
1947 	ld_map_npatch_t	np;
1948 
1949 	/*
1950 	 * Mapfile control directives all start with a '$' character. However,
1951 	 * they are only valid when they are the first thing on a line. That
1952 	 * happens on the first call to ld_map_gettoken() for a new a new
1953 	 * mapfile, as tracked with lms.lms_cdir_valid, and immediately
1954 	 * following each newline seen in the file.
1955 	 */
1956 	cdir_allow = lms.lms_cdir_valid;
1957 	lms.lms_cdir_valid = 0;
1958 
1959 	/* Cycle through the characters looking for tokens. */
1960 	for (;;) {
1961 		/*
1962 		 * Process the next character. This is normally *mf->mf_next,
1963 		 * but if mf->mf_next_ch is non-0, then it contains the
1964 		 * character, and *mf->mf_next contains a NULL termination
1965 		 * from the TK_STRING token returned on the previous call.
1966 		 *
1967 		 * gettoken_ident() ensures that this is never done to
1968 		 * a character that starts a string.
1969 		 */
1970 		if (mf->mf_next_ch == 0) {
1971 			ch = *mf->mf_next;
1972 		} else {
1973 			ch = mf->mf_next_ch;
1974 			mf->mf_next_ch = 0;	/* Reset */
1975 		}
1976 
1977 		/* Map the character to a dispatch action */
1978 		tok = (ch & 0x80) ? TK_OP_ILLCHR : mf->mf_tokdisp[ch];
1979 
1980 		/*
1981 		 * Items that require processing are identified as OP tokens.
1982 		 * We process them, and return a result non-OP token.
1983 		 *
1984 		 * Non-OP tokens are single character tokens, and we return
1985 		 * them immediately.
1986 		 */
1987 		switch (tok) {
1988 		case TK_OP_EOF:
1989 			/* If EOFOK is set, quietly report it as TK_EOF */
1990 			if ((flags & TK_F_EOFOK) != 0)
1991 				return (TK_EOF);
1992 
1993 			/* Treat it as a standard error */
1994 			mf_fatal0(mf, MSG_INTL(MSG_MAP_PREMEOF));
1995 			return (TK_ERROR);
1996 
1997 		case TK_OP_ILLCHR:
1998 			mf_fatal(mf, MSG_INTL(MSG_MAP_ILLCHAR), ch);
1999 			mf->mf_next++;
2000 			return (TK_ERROR);
2001 
2002 		case TK_OP_BADCHR:
2003 			tk_op_badchr:
2004 			null_patch_eol(mf->mf_next, &np);
2005 			mf_fatal(mf, MSG_INTL(MSG_MAP_BADCHAR), mf->mf_next);
2006 			null_patch_undo(&np);
2007 			mf->mf_next++;
2008 			return (TK_ERROR);
2009 
2010 		case TK_OP_WS:	/* White space */
2011 			mf->mf_next++;
2012 			break;
2013 
2014 		case TK_OP_NL:	/* White space too, but bump line number. */
2015 			mf->mf_next++;
2016 			mf->mf_lineno++;
2017 			cdir_allow = 1;
2018 			break;
2019 
2020 		case TK_OP_SIMQUOTE:
2021 			if (flags & TK_F_KEYWORD)
2022 				goto tk_op_badkwquote;
2023 			return (gettoken_simquote_str(mf, flags, tkv));
2024 
2025 		case TK_OP_CQUOTE:
2026 			if (flags & TK_F_KEYWORD) {
2027 			tk_op_badkwquote:
2028 				null_patch_eol(mf->mf_next, &np);
2029 				mf_fatal(mf, MSG_INTL(MSG_MAP_BADKWQUOTE),
2030 				    mf->mf_next);
2031 				null_patch_undo(&np);
2032 				mf->mf_next++;
2033 				return (TK_ERROR);
2034 			}
2035 			return (gettoken_cquote_str(mf, flags, tkv));
2036 
2037 		case TK_OP_CMT:
2038 			advance_to_eol(&mf->mf_next);
2039 			break;
2040 
2041 		case TK_OP_CDIR:
2042 			/*
2043 			 * Control directives are only valid at the start
2044 			 * of a line.
2045 			 */
2046 			if (!cdir_allow) {
2047 				null_patch_eol(mf->mf_next, &np);
2048 				mf_fatal(mf, MSG_INTL(MSG_MAP_CDIR_NOTBOL),
2049 				    mf->mf_next);
2050 				null_patch_undo(&np);
2051 				mf->mf_next++;
2052 				return (TK_ERROR);
2053 			}
2054 			if (!cdir_process(mf))
2055 				return (TK_ERROR);
2056 			break;
2057 
2058 		case TK_OP_NUM:	/* Decimal, hex(0x...), or octal (0...) value */
2059 			if (!ld_map_getint(mf, tkv, FALSE))
2060 				return (TK_ERROR);
2061 			return (TK_INT);
2062 
2063 		case TK_OP_ID:		/* Unquoted identifier */
2064 			return (gettoken_ident(mf, flags, tkv));
2065 
2066 		case TK_OP_CEQUAL:	/* += or -= */
2067 			if (*(mf->mf_next + 1) != '=')
2068 				goto tk_op_badchr;
2069 			tok = (ch == '+') ? TK_PLUSEQ : TK_MINUSEQ;
2070 			mf->mf_next += 2;
2071 			return (tok);
2072 
2073 		default:	/* Non-OP token */
2074 			mf->mf_next++;
2075 			return (tok);
2076 		}
2077 	}
2078 }
2079 
2080 /*
2081  * Given a token and value returned by ld_map_gettoken(), return a string
2082  * representation of it suitable for use in an error message.
2083  *
2084  * entry:
2085  *	tok - Token code. Must not be an OP-token
2086  *	tkv - Token value
2087  */
2088 const char *
2089 ld_map_tokenstr(Token tok, ld_map_tkval_t *tkv, Conv_inv_buf_t *inv_buf)
2090 {
2091 	size_t	cnt;
2092 
2093 	switch (tok) {
2094 	case TK_ERROR:
2095 		return (MSG_ORIG(MSG_STR_ERROR));
2096 	case TK_EOF:
2097 		return (MSG_ORIG(MSG_STR_EOF));
2098 	case TK_STRING:
2099 		return (tkv->tkv_str);
2100 	case TK_COLON:
2101 		return (MSG_ORIG(MSG_QSTR_COLON));
2102 	case TK_SEMICOLON:
2103 		return (MSG_ORIG(MSG_QSTR_SEMICOLON));
2104 	case TK_EQUAL:
2105 		return (MSG_ORIG(MSG_QSTR_EQUAL));
2106 	case TK_PLUSEQ:
2107 		return (MSG_ORIG(MSG_QSTR_PLUSEQ));
2108 	case TK_MINUSEQ:
2109 		return (MSG_ORIG(MSG_QSTR_MINUSEQ));
2110 	case TK_ATSIGN:
2111 		return (MSG_ORIG(MSG_QSTR_ATSIGN));
2112 	case TK_DASH:
2113 		return (MSG_ORIG(MSG_QSTR_DASH));
2114 	case TK_LEFTBKT:
2115 		return (MSG_ORIG(MSG_QSTR_LEFTBKT));
2116 	case TK_RIGHTBKT:
2117 		return (MSG_ORIG(MSG_QSTR_RIGHTBKT));
2118 	case TK_PIPE:
2119 		return (MSG_ORIG(MSG_QSTR_PIPE));
2120 	case TK_INT:
2121 		cnt = tkv->tkv_int.tkvi_cnt;
2122 		if (cnt >= sizeof (inv_buf->buf))
2123 			cnt = sizeof (inv_buf->buf) - 1;
2124 		(void) memcpy(inv_buf->buf, tkv->tkv_int.tkvi_str, cnt);
2125 		inv_buf->buf[cnt] = '\0';
2126 		return (inv_buf->buf);
2127 	case TK_STAR:
2128 		return (MSG_ORIG(MSG_QSTR_STAR));
2129 	case TK_BANG:
2130 		return (MSG_ORIG(MSG_QSTR_BANG));
2131 	default:
2132 		assert(0);
2133 		break;
2134 	}
2135 
2136 	/*NOTREACHED*/
2137 	return (MSG_INTL(MSG_MAP_INTERR));
2138 }
2139 
2140 /*
2141  * Advance the input to the first non-empty line, and determine
2142  * the mapfile version. The version is specified by the mapfile
2143  * using a $mapfile_version directive. The original System V
2144  * syntax lacks this directive, and we use that fact to identify
2145  * such files. SysV mapfile are implicitly defined to have version 1.
2146  *
2147  * entry:
2148  *	ofl - Output file descriptor
2149  *	mf - Mapfile block
2150  *
2151  * exit:
2152  *	On success, updates mf->mf_version, and returns TRUE (1).
2153  *	On failure, returns FALSE (0).
2154  */
2155 static Boolean
2156 mapfile_version(Mapfile *mf)
2157 {
2158 	char	*line_start = mf->mf_next;
2159 	Boolean	cont = TRUE;
2160 	Boolean	status = TRUE;	/* Assume success */
2161 	Token	tok;
2162 
2163 	mf->mf_version = MFV_SYSV;
2164 
2165 	/*
2166 	 * Cycle through the characters looking for tokens. Although the
2167 	 * true version is not known yet, we use the v2 dispatch table.
2168 	 * It contains control directives, which we need for this search,
2169 	 * and the other TK_OP_ tokens we will recognize and act on are the
2170 	 * same for both tables.
2171 	 *
2172 	 * It is important not to process any tokens that would lead to
2173 	 * a non-OP token:
2174 	 *
2175 	 * -	The version is required to interpret them
2176 	 * -	Our mapfile descriptor is not fully initialized,
2177 	 *	attempts to run that code will crash the program.
2178 	 */
2179 	while (cont) {
2180 		/* Map the character to a dispatch action */
2181 		tok = (*mf->mf_next & 0x80) ?
2182 		    TK_OP_ILLCHR : gettok_dispatch_v2[*mf->mf_next];
2183 
2184 		switch (tok) {
2185 		case TK_OP_WS:	/* White space */
2186 			mf->mf_next++;
2187 			break;
2188 
2189 		case TK_OP_NL:	/* White space too, but bump line number. */
2190 			mf->mf_next++;
2191 			mf->mf_lineno++;
2192 			break;
2193 
2194 		case TK_OP_CMT:
2195 			advance_to_eol(&mf->mf_next);
2196 			break;
2197 
2198 		case TK_OP_CDIR:
2199 			/*
2200 			 * Control directives are only valid at the start
2201 			 * of a line. However, as we have not yet seen
2202 			 * a token, we do not need to test for this, and
2203 			 * can safely assume that we are at the start.
2204 			 */
2205 			if (!strncasecmp(mf->mf_next,
2206 			    MSG_ORIG(MSG_STR_CDIR_MFVER),
2207 			    MSG_STR_CDIR_MFVER_SIZE) &&
2208 			    isspace_nonl(*(mf->mf_next +
2209 			    MSG_STR_CDIR_MFVER_SIZE))) {
2210 				ld_map_tkval_t	ver;
2211 
2212 				mf->mf_next += MSG_STR_CDIR_MFVER_SIZE + 1;
2213 				if (!ld_map_getint(mf, &ver, TRUE)) {
2214 					status = cont = FALSE;
2215 					break;
2216 				}
2217 				/*
2218 				 * Is it a valid version? Note that we
2219 				 * intentionally do not allow you to
2220 				 * specify version 1 using the $mapfile_version
2221 				 * syntax, because that's reserved to version
2222 				 * 2 and up.
2223 				 */
2224 				if ((ver.tkv_int.tkvi_value < 2) ||
2225 				    (ver.tkv_int.tkvi_value >= MFV_NUM)) {
2226 					const char *fmt;
2227 
2228 					fmt = (ver.tkv_int.tkvi_value < 2) ?
2229 					    MSG_INTL(MSG_MAP_CDIR_BADVDIR) :
2230 					    MSG_INTL(MSG_MAP_CDIR_BADVER);
2231 					mf_fatal(mf, fmt,
2232 					    EC_WORD(ver.tkv_int.tkvi_value));
2233 					status = cont = FALSE;
2234 					break;
2235 				}
2236 				mf->mf_version = ver.tkv_int.tkvi_value;
2237 				cont = FALSE; /* Version recovered. All done */
2238 				break;
2239 			}
2240 			/*
2241 			 * Not a version directive. Reset the current position
2242 			 * to the start of the current line and stop here.
2243 			 * SysV syntax applies.
2244 			 */
2245 			mf->mf_next = line_start;
2246 			cont = FALSE;
2247 			break;
2248 
2249 		default:
2250 			/*
2251 			 * If we see anything else, then stop at this point.
2252 			 * The file has System V syntax (version 1), and the
2253 			 * next token should be interpreted as such.
2254 			 */
2255 			cont = FALSE;
2256 			break;
2257 		}
2258 	}
2259 
2260 	return (status);
2261 }
2262 
2263 /*
2264  * Parse the mapfile.
2265  */
2266 Boolean
2267 ld_map_parse(const char *mapfile, Ofl_desc *ofl)
2268 {
2269 	struct stat	stat_buf;	/* stat of mapfile */
2270 	int		mapfile_fd;	/* descriptor for mapfile */
2271 	int		err;
2272 	Mapfile		*mf;		/* Mapfile descriptor */
2273 	size_t		name_len;	/* strlen(mapfile) */
2274 
2275 	/*
2276 	 * Determine if we're dealing with a file or a directory.
2277 	 */
2278 	if (stat(mapfile, &stat_buf) == -1) {
2279 		err = errno;
2280 		ld_eprintf(ofl, ERR_FATAL, MSG_INTL(MSG_SYS_STAT), mapfile,
2281 		    strerror(err));
2282 		return (FALSE);
2283 	}
2284 	if (S_ISDIR(stat_buf.st_mode)) {
2285 		DIR		*dirp;
2286 		struct dirent	*denp;
2287 
2288 		/*
2289 		 * Open the directory and interpret each visible file as a
2290 		 * mapfile.
2291 		 */
2292 		if ((dirp = opendir(mapfile)) == NULL)
2293 			return (TRUE);
2294 
2295 		while ((denp = readdir(dirp)) != NULL) {
2296 			char	path[PATH_MAX];
2297 
2298 			/*
2299 			 * Ignore any hidden filenames.  Construct the full
2300 			 * pathname to the new mapfile.
2301 			 */
2302 			if (*denp->d_name == '.')
2303 				continue;
2304 			(void) snprintf(path, PATH_MAX, MSG_ORIG(MSG_STR_PATH),
2305 			    mapfile, denp->d_name);
2306 			if (!ld_map_parse(path, ofl))
2307 				return (FALSE);
2308 		}
2309 		(void) closedir(dirp);
2310 		return (TRUE);
2311 	} else if (!S_ISREG(stat_buf.st_mode)) {
2312 		ld_eprintf(ofl, ERR_FATAL, MSG_INTL(MSG_SYS_NOTREG), mapfile);
2313 		return (FALSE);
2314 	}
2315 
2316 	/* Open file */
2317 	if ((mapfile_fd = open(mapfile, O_RDONLY)) == -1) {
2318 		err = errno;
2319 		ld_eprintf(ofl, ERR_FATAL, MSG_INTL(MSG_SYS_OPEN), mapfile,
2320 		    strerror(err));
2321 		return (FALSE);
2322 	}
2323 
2324 	/*
2325 	 * Allocate enough memory to hold the state block, mapfile name,
2326 	 * and mapfile text. Text has alignment 1, so it can follow the
2327 	 * state block without padding.
2328 	 */
2329 	name_len = strlen(mapfile) + 1;
2330 	mf = libld_malloc(sizeof (*mf) + name_len + stat_buf.st_size + 1);
2331 	if (mf == NULL)
2332 		return (FALSE);
2333 	mf->mf_ofl = ofl;
2334 	mf->mf_name = (char *)(mf + 1);
2335 	(void) strcpy(mf->mf_name, mapfile);
2336 	mf->mf_text = mf->mf_name + name_len;
2337 	if (read(mapfile_fd, mf->mf_text, stat_buf.st_size) !=
2338 	    stat_buf.st_size) {
2339 		err = errno;
2340 		ld_eprintf(ofl, ERR_FATAL, MSG_INTL(MSG_SYS_READ), mapfile,
2341 		    strerror(err));
2342 		(void) close(mapfile_fd);
2343 		return (FALSE);
2344 	}
2345 	(void) close(mapfile_fd);
2346 	mf->mf_text[stat_buf.st_size] = '\0';
2347 	mf->mf_next = mf->mf_text;
2348 	mf->mf_lineno = 1;
2349 	mf->mf_next_ch = 0;		/* No "lookahead" character yet */
2350 	mf->mf_ec_insndx = 0;		/* Insert entrace criteria at top */
2351 
2352 	/*
2353 	 * Read just enough from the mapfile to determine the version,
2354 	 * and then dispatch to the appropriate code for further processing
2355 	 */
2356 	if (!mapfile_version(mf))
2357 		return (FALSE);
2358 
2359 	/*
2360 	 * Start and continuation masks for unquoted identifier at this
2361 	 * mapfile version level.
2362 	 */
2363 	mf->mf_tkid_start = TKID_ATTR_START(mf->mf_version);
2364 	mf->mf_tkid_cont = TKID_ATTR_CONT(mf->mf_version);
2365 
2366 	DBG_CALL(Dbg_map_parse(ofl->ofl_lml, mapfile, mf->mf_version));
2367 
2368 	switch (mf->mf_version) {
2369 	case MFV_SYSV:
2370 		/* Guidance: Use newer mapfile syntax */
2371 		if (OFL_GUIDANCE(ofl, FLG_OFG_NO_MF))
2372 			ld_eprintf(ofl, ERR_GUIDANCE,
2373 			    MSG_INTL(MSG_GUIDE_MAPFILE), mapfile);
2374 
2375 		mf->mf_tokdisp = gettok_dispatch_v1;
2376 		if (!ld_map_parse_v1(mf))
2377 			return (FALSE);
2378 		break;
2379 
2380 	case MFV_SOLARIS:
2381 		mf->mf_tokdisp = gettok_dispatch_v2;
2382 		STACK_RESET(lms.lms_cdir_stack);
2383 
2384 		/*
2385 		 * If the conditional expression identifier tree has not been
2386 		 * initialized, set it up. This is only done on the first
2387 		 * mapfile, because the identifier control directives accumulate
2388 		 * across all the mapfiles.
2389 		 */
2390 		if ((lms.lms_cexp_id == NULL) && !cexp_ident_init())
2391 			return (FALSE);
2392 
2393 		/*
2394 		 * Tell ld_map_gettoken() we will accept a '$' as starting a
2395 		 * control directive on the first call. Normally, they are
2396 		 * only allowed after a newline.
2397 		 */
2398 		lms.lms_cdir_valid = 1;
2399 
2400 		if (!ld_map_parse_v2(mf))
2401 			return (FALSE);
2402 
2403 		/* Did we leave any open $if control directives? */
2404 		if (!STACK_IS_EMPTY(lms.lms_cdir_stack)) {
2405 			while (!STACK_IS_EMPTY(lms.lms_cdir_stack)) {
2406 				cdir_level_t *level =
2407 				    &STACK_POP(lms.lms_cdir_stack);
2408 
2409 				mf_fatal(mf, MSG_INTL(MSG_MAP_CDIR_NOEND),
2410 				    EC_LINENO(level->cdl_if_lineno));
2411 			}
2412 			return (FALSE);
2413 		}
2414 		break;
2415 	}
2416 
2417 	return (TRUE);
2418 }
2419 
2420 /*
2421  * Sort the segment list. This is necessary if a mapfile has set explicit
2422  * virtual addresses for segments, or defined a SEGMENT_ORDER directive.
2423  *
2424  * Only PT_LOAD segments can be assigned a virtual address.  These segments can
2425  * be one of two types:
2426  *
2427  *  -	Standard segments for text, data or bss.  These segments will have been
2428  *	inserted before the default text (first PT_LOAD) segment.
2429  *
2430  *  -	Empty (reservation) segments.  These segment will have been inserted at
2431  *	the end of any default PT_LOAD segments.
2432  *
2433  * Any standard segments that are assigned a virtual address will be sorted,
2434  * and as their definitions precede any default PT_LOAD segments, these segments
2435  * will be assigned sections before any defaults.
2436  *
2437  * Any reservation segments are also sorted amoung themselves, as these segments
2438  * must still follow the standard default segments.
2439  */
2440 static Boolean
2441 sort_seg_list(Ofl_desc *ofl)
2442 {
2443 	APlist	*sort_segs = NULL, *load_segs = NULL;
2444 	Sg_desc	*sgp1;
2445 	Aliste	idx1;
2446 	Aliste	nsegs;
2447 
2448 
2449 	/*
2450 	 * We know the number of elements in the sorted list will be
2451 	 * the same as the original, so use this as the initial allocation
2452 	 * size for the replacement aplist.
2453 	 */
2454 	nsegs = aplist_nitems(ofl->ofl_segs);
2455 
2456 
2457 	/* Add the items below SGID_TEXT to the list */
2458 	for (APLIST_TRAVERSE(ofl->ofl_segs, idx1, sgp1)) {
2459 		if (sgp1->sg_id >= SGID_TEXT)
2460 			break;
2461 
2462 		if (aplist_append(&sort_segs, sgp1, nsegs) == NULL)
2463 				return (FALSE);
2464 	}
2465 
2466 	/*
2467 	 * If there are any SEGMENT_ORDER items, add them, and set their
2468 	 * FLG_SG_ORDERED flag to identify them in debug output, and to
2469 	 * prevent them from being added again below.
2470 	 */
2471 	for (APLIST_TRAVERSE(ofl->ofl_segs_order, idx1, sgp1)) {
2472 		if (aplist_append(&sort_segs, sgp1, nsegs) == NULL)
2473 			return (FALSE);
2474 		sgp1->sg_flags |= FLG_SG_ORDERED;
2475 	}
2476 
2477 	/*
2478 	 * Add the loadable segments to another list in sorted order.
2479 	 */
2480 	DBG_CALL(Dbg_map_sort_title(ofl->ofl_lml, TRUE));
2481 	for (APLIST_TRAVERSE(ofl->ofl_segs, idx1, sgp1)) {
2482 		DBG_CALL(Dbg_map_sort_seg(ofl->ofl_lml, ELFOSABI_SOLARIS,
2483 		    ld_targ.t_m.m_mach, sgp1));
2484 
2485 		/* Only interested in PT_LOAD items not in SEGMENT_ORDER list */
2486 		if ((sgp1->sg_phdr.p_type != PT_LOAD) ||
2487 		    (sgp1->sg_flags & FLG_SG_ORDERED))
2488 			continue;
2489 
2490 		/*
2491 		 * If the loadable segment does not contain a vaddr, simply
2492 		 * append it to the new list.
2493 		 */
2494 		if ((sgp1->sg_flags & FLG_SG_P_VADDR) == 0) {
2495 			if (aplist_append(&load_segs, sgp1, AL_CNT_SEGMENTS) ==
2496 			    NULL)
2497 				return (FALSE);
2498 
2499 		} else {
2500 			Aliste		idx2;
2501 			Sg_desc		*sgp2;
2502 			int		inserted = 0;
2503 
2504 			/*
2505 			 * Traverse the segment list we are creating, looking
2506 			 * for a segment that defines a vaddr.
2507 			 */
2508 			for (APLIST_TRAVERSE(load_segs, idx2, sgp2)) {
2509 				/*
2510 				 * Any real segments that contain vaddr's need
2511 				 * to be sorted.  Any reservation segments also
2512 				 * need to be sorted.  However, any reservation
2513 				 * segments should be placed after any real
2514 				 * segments.
2515 				 */
2516 				if (((sgp2->sg_flags &
2517 				    (FLG_SG_P_VADDR | FLG_SG_EMPTY)) == 0) &&
2518 				    (sgp1->sg_flags & FLG_SG_EMPTY))
2519 					continue;
2520 
2521 				if ((sgp2->sg_flags & FLG_SG_P_VADDR) &&
2522 				    ((sgp2->sg_flags & FLG_SG_EMPTY) ==
2523 				    (sgp1->sg_flags & FLG_SG_EMPTY))) {
2524 					if (sgp1->sg_phdr.p_vaddr ==
2525 					    sgp2->sg_phdr.p_vaddr) {
2526 						ld_eprintf(ofl, ERR_FATAL,
2527 						    MSG_INTL(MSG_MAP_SEGSAME),
2528 						    sgp1->sg_name,
2529 						    sgp2->sg_name);
2530 						return (FALSE);
2531 					}
2532 
2533 					if (sgp1->sg_phdr.p_vaddr >
2534 					    sgp2->sg_phdr.p_vaddr)
2535 						continue;
2536 				}
2537 
2538 				/*
2539 				 * Insert this segment before the segment on
2540 				 * the load_segs list.
2541 				 */
2542 				if (aplist_insert(&load_segs, sgp1,
2543 				    AL_CNT_SEGMENTS, idx2) == NULL)
2544 					return (FALSE);
2545 				inserted = 1;
2546 				break;
2547 			}
2548 
2549 			/*
2550 			 * If the segment being inspected has not been inserted
2551 			 * in the segment list, simply append it to the list.
2552 			 */
2553 			if ((inserted == 0) && (aplist_append(&load_segs,
2554 			    sgp1, AL_CNT_SEGMENTS) == NULL))
2555 				return (FALSE);
2556 		}
2557 	}
2558 
2559 	/*
2560 	 * Add the sorted loadable segments to our initial segment list.
2561 	 */
2562 	for (APLIST_TRAVERSE(load_segs, idx1, sgp1)) {
2563 		if (aplist_append(&sort_segs, sgp1, AL_CNT_SEGMENTS) == NULL)
2564 			return (FALSE);
2565 	}
2566 
2567 	/*
2568 	 * Add all other segments to our list.
2569 	 */
2570 	for (APLIST_TRAVERSE(ofl->ofl_segs, idx1, sgp1)) {
2571 		if ((sgp1->sg_id < SGID_TEXT) ||
2572 		    (sgp1->sg_phdr.p_type == PT_LOAD) ||
2573 		    (sgp1->sg_flags & FLG_SG_ORDERED))
2574 			continue;
2575 
2576 		if (aplist_append(&sort_segs, sgp1, AL_CNT_SEGMENTS) == NULL)
2577 			return (FALSE);
2578 	}
2579 
2580 	/*
2581 	 * Free the original list, and the pt_load list, and use
2582 	 * the new list as the segment list.
2583 	 */
2584 	free(ofl->ofl_segs);
2585 	if (load_segs) free(load_segs);
2586 	ofl->ofl_segs = sort_segs;
2587 
2588 	if (DBG_ENABLED) {
2589 		Dbg_map_sort_title(ofl->ofl_lml, FALSE);
2590 		for (APLIST_TRAVERSE(ofl->ofl_segs, idx1, sgp1)) {
2591 			Dbg_map_sort_seg(ofl->ofl_lml, ELFOSABI_SOLARIS,
2592 			    ld_targ.t_m.m_mach, sgp1);
2593 			}
2594 		}
2595 
2596 	return (TRUE);
2597 }
2598 
2599 /*
2600  * After all mapfiles have been processed, this routine is used to
2601  * finish any remaining mapfile related work.
2602  *
2603  * exit:
2604  *	Returns TRUE on success, and FALSE on failure.
2605  */
2606 Boolean
2607 ld_map_post_process(Ofl_desc *ofl)
2608 {
2609 	Aliste		idx, idx2;
2610 	Is_desc		*isp;
2611 	Sg_desc		*sgp;
2612 	Ent_desc	*enp;
2613 	Sg_desc		*first_seg = NULL;
2614 
2615 
2616 	DBG_CALL(Dbg_map_post_title(ofl->ofl_lml));
2617 
2618 	/*
2619 	 * Per-segment processing:
2620 	 * -	Identify segments with explicit virtual address
2621 	 * -	Details of input and output section order
2622 	 */
2623 	for (APLIST_TRAVERSE(ofl->ofl_segs, idx, sgp)) {
2624 		/*
2625 		 * We are looking for segments. Program headers that represent
2626 		 * segments are required to have a non-NULL name pointer,
2627 		 * while that those that do not are required to have a
2628 		 * NULL name pointer.
2629 		 */
2630 		if (sgp->sg_name == NULL)
2631 			continue;
2632 
2633 		/* Remember the first non-disabled segment */
2634 		if ((first_seg == NULL) && !(sgp->sg_flags & FLG_SG_DISABLED))
2635 			first_seg = sgp;
2636 
2637 		/*
2638 		 * If a segment has an explicit virtual address, we will
2639 		 * need to sort the segments.
2640 		 */
2641 		if (sgp->sg_flags & FLG_SG_P_VADDR)
2642 			ofl->ofl_flags1 |= FLG_OF1_VADDR;
2643 
2644 		/*
2645 		 * The FLG_OF_OS_ORDER flag enables the code that does
2646 		 * output section ordering. Set if the segment has
2647 		 * a non-empty output section order list.
2648 		 */
2649 		if (alist_nitems(sgp->sg_os_order) > 0)
2650 			ofl->ofl_flags |= FLG_OF_OS_ORDER;
2651 
2652 		/*
2653 		 * The version 1 and version 2 syntaxes for input section
2654 		 * ordering are different and incompatible enough that we
2655 		 * only allow the use of one or the other for a given segment:
2656 		 *
2657 		 * v1)	The version 1 syntax has the user set the ?O flag on
2658 		 *	the segment. If this is done, all input sections placed
2659 		 *	via an entrance criteria that has a section name are to
2660 		 *	be sorted, using the order of the entrance criteria
2661 		 *	as the sort key.
2662 		 *
2663 		 * v2)	The version 2 syntax has the user specify a name for
2664 		 * 	the entry criteria, and then provide a list of entry
2665 		 * 	criteria names via the IS_ORDER segment attribute.
2666 		 * 	Sections placed via the criteria listed in IS_ORDER
2667 		 * 	are sorted, and the others are not.
2668 		 *
2669 		 * Regardless of the syntax version used, the section sorting
2670 		 * code expects the following:
2671 		 *
2672 		 * -	Segments requiring input section sorting have the
2673 		 *	FLG_SG_IS_ORDER flag set
2674 		 *
2675 		 * -	Entrance criteria referencing the segment that
2676 		 *	participate in input section sorting have a non-zero
2677 		 *	sort key in their ec_ordndx field.
2678 		 *
2679 		 * At this point, the following are true:
2680 		 *
2681 		 * -	All entrance criteria have ec_ordndx set to 0.
2682 		 * -	Segments that require the version 1 behavior have
2683 		 *	the FLG_SG_IS_ORDER flag set, and the segments
2684 		 *	sg_is_order list is empty.
2685 		 * -	Segments that require the version 2 behavior do not
2686 		 *	have FLG_SG_IS_ORDER set, and the sg_is_order list is
2687 		 *	non-empty. This list contains the names of the entrance
2688 		 *	criteria that will participate in input section sorting,
2689 		 *	and their relative order in the list provides the
2690 		 *	sort key to use.
2691 		 *
2692 		 * We must detect these two cases, set the FLG_SG_IS_ORDER
2693 		 * flag as necessary, and fill in all entrance criteria
2694 		 * sort keys. If any input section sorting is to be done,
2695 		 * we also set the FLG_OF_IS_ORDER flag on the output descriptor
2696 		 * to enable the code that does that work.
2697 		 */
2698 
2699 		/* Version 1: ?O flag? */
2700 		if (sgp->sg_flags & FLG_SG_IS_ORDER) {
2701 			Word	index = 0;
2702 
2703 			ofl->ofl_flags |= FLG_OF_IS_ORDER;
2704 			DBG_CALL(Dbg_map_ent_ord_title(ofl->ofl_lml,
2705 			    sgp->sg_name));
2706 
2707 			/*
2708 			 * Give each user defined entrance criteria for this
2709 			 * segment that specifies a section name a
2710 			 * monotonically increasing sort key.
2711 			 */
2712 			for (APLIST_TRAVERSE(ofl->ofl_ents, idx2, enp))
2713 				if ((enp->ec_segment == sgp) &&
2714 				    (enp->ec_is_name != NULL) &&
2715 				    ((enp->ec_flags & FLG_EC_BUILTIN) == 0))
2716 					enp->ec_ordndx = ++index;
2717 			continue;
2718 		}
2719 
2720 		/* Version 2: SEGMENT IS_ORDER list? */
2721 		if (aplist_nitems(sgp->sg_is_order) > 0) {
2722 			Word	index = 0;
2723 
2724 			ofl->ofl_flags |= FLG_OF_IS_ORDER;
2725 			DBG_CALL(Dbg_map_ent_ord_title(ofl->ofl_lml,
2726 			    sgp->sg_name));
2727 
2728 			/*
2729 			 * Give each entrance criteria in the sg_is_order
2730 			 * list a monotonically increasing sort key.
2731 			 */
2732 			for (APLIST_TRAVERSE(sgp->sg_is_order, idx2, enp)) {
2733 				enp->ec_ordndx = ++index;
2734 				enp->ec_segment->sg_flags |= FLG_SG_IS_ORDER;
2735 			}
2736 		}
2737 	}
2738 
2739 	/* Sort the segment descriptors if necessary */
2740 	if (((ofl->ofl_flags1 & FLG_OF1_VADDR) ||
2741 	    (aplist_nitems(ofl->ofl_segs_order) > 0)) &&
2742 	    !sort_seg_list(ofl))
2743 		return (FALSE);
2744 
2745 	/*
2746 	 * If the output file is a static file without an interpreter, and
2747 	 * if any virtual address is specified, then set the NOHDR flag for
2748 	 * backward compatibility.
2749 	 */
2750 	if (!(ofl->ofl_flags & (FLG_OF_DYNAMIC | FLG_OF_RELOBJ)) &&
2751 	    !(ofl->ofl_osinterp) && (ofl->ofl_flags1 & FLG_OF1_VADDR))
2752 		ofl->ofl_dtflags_1 |= DF_1_NOHDR;
2753 
2754 	if (ofl->ofl_flags & FLG_OF_RELOBJ) {
2755 		/*
2756 		 * NOHDR has no effect on a relocatable file.
2757 		 * Make sure this flag isn't set.
2758 		 */
2759 		ofl->ofl_dtflags_1 &= ~DF_1_NOHDR;
2760 	} else if (first_seg != NULL) {
2761 		/*
2762 		 * DF_1_NOHDR might have been set globally by the HDR_NOALLOC
2763 		 * directive. If not, then we want to check the per-segment
2764 		 * flag for the first loadable segment and propagate it
2765 		 * if set.
2766 		 */
2767 		if ((ofl->ofl_dtflags_1 & DF_1_NOHDR) == 0) {
2768 			/*
2769 			 * If we sorted the segments, the first segment
2770 			 * may have changed.
2771 			 */
2772 			if ((ofl->ofl_flags1 & FLG_OF1_VADDR) ||
2773 			    (aplist_nitems(ofl->ofl_segs_order) > 0)) {
2774 				for (APLIST_TRAVERSE(ofl->ofl_segs, idx, sgp)) {
2775 					if (sgp->sg_name == NULL)
2776 						continue;
2777 					if ((sgp->sg_flags & FLG_SG_DISABLED) ==
2778 					    0) {
2779 						first_seg = sgp;
2780 						break;
2781 					}
2782 				}
2783 			}
2784 
2785 			/*
2786 			 * If the per-segment NOHDR flag is set on our first
2787 			 * segment, then make it take effect.
2788 			 */
2789 			if (first_seg->sg_flags & FLG_SG_NOHDR)
2790 				ofl->ofl_dtflags_1 |= DF_1_NOHDR;
2791 		}
2792 
2793 		/*
2794 		 * For executable and shared objects, the first segment must
2795 		 * be loadable unless NOHDR was specified, because the ELF
2796 		 * header must simultaneously lie at offset 0 of the file and
2797 		 * be included in the first loadable segment. This isn't
2798 		 * possible if some other segment type starts the file
2799 		 */
2800 		if (!(ofl->ofl_dtflags_1 & DF_1_NOHDR) &&
2801 		    (first_seg->sg_phdr.p_type != PT_LOAD)) {
2802 			Conv_inv_buf_t	inv_buf;
2803 
2804 			ld_eprintf(ofl, ERR_FATAL,
2805 			    MSG_INTL(MSG_SEG_FIRNOTLOAD),
2806 			    conv_phdr_type(ELFOSABI_SOLARIS, ld_targ.t_m.m_mach,
2807 			    first_seg->sg_phdr.p_type, 0, &inv_buf),
2808 			    first_seg->sg_name);
2809 			return (FALSE);
2810 		}
2811 	}
2812 
2813 	/*
2814 	 * Mapfiles may have been used to create symbol definitions
2815 	 * with backing storage.  Although the backing storage is
2816 	 * associated with an input section, the association of the
2817 	 * section to an output section (and segment) is initially
2818 	 * deferred.  Now that all mapfile processing is complete, any
2819 	 * entrance criteria requirements have been processed, and
2820 	 * these backing storage sections can be associated with the
2821 	 * appropriate output section (and segment).
2822 	 */
2823 	if (ofl->ofl_maptext || ofl->ofl_mapdata)
2824 		DBG_CALL(Dbg_sec_backing(ofl->ofl_lml));
2825 
2826 	for (APLIST_TRAVERSE(ofl->ofl_maptext, idx, isp)) {
2827 		if (ld_place_section(ofl, isp, NULL,
2828 		    ld_targ.t_id.id_text, NULL) == (Os_desc *)S_ERROR)
2829 			return (FALSE);
2830 	}
2831 
2832 	for (APLIST_TRAVERSE(ofl->ofl_mapdata, idx, isp)) {
2833 		if (ld_place_section(ofl, isp, NULL,
2834 		    ld_targ.t_id.id_data, NULL) == (Os_desc *)S_ERROR)
2835 			return (FALSE);
2836 	}
2837 
2838 	return (TRUE);
2839 }
2840