xref: /illumos-gate/usr/src/uts/common/io/bnxe/577xx/drivers/common/lm/include/lm5710.h (revision 9b6224883056ca9db111541974efeb6a4de0c074)
1 /*******************************************************************************
2  * CDDL HEADER START
3  *
4  * The contents of this file are subject to the terms of the
5  * Common Development and Distribution License (the "License").
6  * You may not use this file except in compliance with the License.
7  *
8  * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
9  * or http://www.opensolaris.org/os/licensing.
10  * See the License for the specific language governing permissions
11  * and limitations under the License.
12  *
13  * When distributing Covered Code, include this CDDL HEADER in each
14  * file and include the License file at usr/src/OPENSOLARIS.LICENSE.
15  * If applicable, add the following below this CDDL HEADER, with the
16  * fields enclosed by brackets "[]" replaced with your own identifying
17  * information: Portions Copyright [yyyy] [name of copyright owner]
18  *
19  * CDDL HEADER END
20  *
21  * Copyright 2014 QLogic Corporation
22  * The contents of this file are subject to the terms of the
23  * QLogic End User License (the "License").
24  * You may not use this file except in compliance with the License.
25  *
26  * You can obtain a copy of the License at
27  * http://www.qlogic.com/Resources/Documents/DriverDownloadHelp/
28  * QLogic_End_User_Software_License.txt
29  * See the License for the specific language governing permissions
30  * and limitations under the License.
31  *
32  *
33  * Module Description:
34  *
35  *
36  * History:
37  *    10/10/01 Hav Khauv        Inception.
38  ******************************************************************************/
39 
40 #ifndef _LM5710_H
41 #define _LM5710_H
42 
43 //migrated from 5706_reg.h
44 #ifndef __BIG_ENDIAN
45 #ifndef LITTLE_ENDIAN
46     #define LITTLE_ENDIAN
47 #endif
48 #else
49 #undef LITTLE_ENDIAN
50 #ifndef BIG_ENDIAN
51     #define BIG_ENDIAN
52 #endif
53 #ifndef BIG_ENDIAN_HOST
54     #define BIG_ENDIAN_HOST
55 #endif
56 #endif
57 
58 #ifndef INLINE
59 #if DBG
60 #define INLINE
61 #else
62 #define INLINE __inline
63 #endif
64 #endif
65 
66 #if !defined(LITTLE_ENDIAN) && !defined(BIG_ENDIAN)
67     #error "Missing either LITTLE_ENDIAN or BIG_ENDIAN definition."
68 #endif
69 
70 #define ECORE_NIV
71 
72 #ifdef __LINUX
73 #include <linux/types.h>
74 #endif
75 #include "bcmtype.h"
76 #include "debug.h"
77 #include "igu_def.h"
78 #include "microcode_constants.h"
79 #include "fcoe_constants.h"
80 #include "toe_constants.h"
81 #include "tcp_constants.h"
82 #include "eth_constants.h"
83 //this is the included HSI
84 #include "5710_hsi.h"
85 #include "lm5710_hsi.h"
86 #include "pcics_reg_driver.h"
87 #include "bigmac_addresses.h"
88 #include "misc_bits.h"
89 #include "emac_reg_driver.h"
90 #include "dmae_clients.h"
91 #include "prs_flags.h"
92 #include "57712_reg.h"
93 #include "grc_addr.h"
94 #include "bd_chain_st.h"
95 #include "lm_sp_req_mgr.h"
96 #include "license.h"
97 #include "mcp_shmem.h"
98 #include "lm_dcbx_mp.h"
99 
100 #ifndef elink_dev
101 #define elink_dev _lm_device_t
102 #endif
103 #include "clc.h"
104 //#include "status_code.h"
105 // TODO - we will add ou rown shmem
106 //#include "shmem.h"
107 //
108 #define DEVICE_TYPE_PF        0
109 #define DEVICE_TYPE_VF        1
110 
111 /* Virtualization types (vt) */
112 #define VT_NONE               0
113 #define VT_BASIC_VF           1
114 #define VT_CHANNEL_VF         2
115 #define VT_ASSIGNED_TO_VM_PF  3
116 
117 #define VT_HW_CHANNEL_TYPE    0
118 #define VT_SW_CHANNEL_TYPE    1
119 
120 
121 #define IS_CHANNEL_VFDEV(pdev)  (((pdev)->params.device_type == DEVICE_TYPE_VF) && ((pdev)->params.virtualization_type == VT_CHANNEL_VF))
122 
123 #define IS_BASIC_VIRT_MODE_MASTER_PFDEV(pdev)      (((pdev)->params.device_type == DEVICE_TYPE_PF) && ((pdev)->params.virtualization_type == VT_BASIC_VF))
124 #define IS_CHANNEL_VIRT_MODE_MASTER_PFDEV(pdev)    (((pdev)->params.device_type == DEVICE_TYPE_PF) && ((pdev)->params.virtualization_type == VT_CHANNEL_VF))
125 #define IS_ASSIGNED_TO_VM_PFDEV(pdev)              (((pdev)->params.device_type == DEVICE_TYPE_PF) && ((pdev)->params.virtualization_type == VT_ASSIGNED_TO_VM_PF))
126 #define DBG_DMP_IS_ONLINE(pdev)                    IS_ASSIGNED_TO_VM_PFDEV(pdev)
127 
128 #define IS_HW_CHANNEL_VIRT_MODE(pdev)    (((pdev)->params.virtualization_type == VT_CHANNEL_VF) && ((pdev)->params.channel_type == VT_HW_CHANNEL_TYPE))
129 #define IS_SW_CHANNEL_VIRT_MODE(pdev)    (((pdev)->params.virtualization_type == VT_CHANNEL_VF) && ((pdev)->params.channel_type == VT_SW_CHANNEL_TYPE))
130 
131 #define IS_PFDEV(pdev)          (((pdev)->pf_dev == NULL) && ((pdev)->params.device_type == DEVICE_TYPE_PF))
132 #define IS_VFDEV(pdev)          (((pdev)->pf_dev != NULL) || ((pdev)->params.device_type == DEVICE_TYPE_VF))
133 #define PFDEV(pdev)         (pdev)
134 
135 
136 
137 #define LM_VF_MAX_RVFID_SIZE    6
138 
139 #define LM_MAX_VF_CID_WND_SIZE      4
140 #define LM_MAX_VF_CHAINS_PER_PF     (1 << LM_MAX_VF_CID_WND_SIZE)
141 
142 #define LM_VF_CID_WND_SIZE(_pdev)          (((_pdev)->hw_info.sriov_info.max_chains_per_vf) ? (_pdev)->hw_info.sriov_info.vf_cid_wnd_size : LM_MAX_VF_CID_WND_SIZE)
143 #define LM_VF_CHAINS_PER_PF(_pdev)         (((_pdev)->hw_info.sriov_info.max_chains_per_vf) ? (_pdev)->hw_info.sriov_info.max_chains_per_vf : LM_MAX_VF_CHAINS_PER_PF)
144 
145 #define LM_VF_NUM_CIDS_MASK(_pdev)     ((1 << LM_VF_CID_WND_SIZE(_pdev)) - 1)
146 
147 #define LM_VF_CID_BASE(_pdev)          (1 << (LM_VF_MAX_RVFID_SIZE + LM_VF_CID_WND_SIZE(_pdev)))
148 
149 #define LM_VF_MAX_RVFID_MASK    ((1 << LM_VF_MAX_RVFID_SIZE) - 1)
150 
151 
152 #define VF_TO_PF_CID(pdev,cid) (cid)
153 #define PF_TO_VF_CID(pdev,cid) (cid)
154 
155 #define GET_VF_Q_ID_FROM_PF_CID(cid) (cid & LM_VF_NUM_CIDS_MASK(pdev))
156 #define GET_ABS_VF_ID_FROM_PF_CID(cid) ((cid >> LM_VF_CID_WND_SIZE(pdev)) & LM_VF_MAX_RVFID_MASK)
157 
158 #define VF_BAR0_IGU_OFFSET          0x0000   /*0x0000-0x3000: (12KB)*/
159 #define VF_BAR0_USDM_QUEUES_OFFSET  0x3000  /*-0x4100: (ZoneA) (4352B)*/
160 #define VF_BAR0_CSDM_QUEUES_OFFSET  0x4100  /*-0x5200: (ZoneA) (4352B)*/
161 #define VF_BAR0_XSDM_QUEUES_OFFSET  0x5200  /*-0x6300: (ZoneA) (4352B)*/
162 #define VF_BAR0_TSDM_QUEUES_OFFSET  0x6300  /*-0x7400: (ZoneA) (4352B)*/
163 #define VF_BAR0_USDM_GLOBAL_OFFSET  0x7400  /*-0x7600: (ZoneB) (512B)*/
164 #define VF_BAR0_CSDM_GLOBAL_OFFSET  0x7600  /*-0x7800: (ZoneB) (512B)*/
165 #define VF_BAR0_XSDM_GLOBAL_OFFSET  0x7800  /*-0x7A00: (ZoneB) (512B)*/
166 #define VF_BAR0_TSDM_GLOBAL_OFFSET  0x7A00  /*-0x7C00: (ZoneB) (512B)*/
167 #define VF_BAR0_DB_OFFSET           0x7C00  /*-0x7E00: (512B)*/
168 #define VF_BAR0_DB_SIZE             512
169 #define VF_BAR0_GRC_OFFSET          0x7E00   /*-0x8000:(512B) */
170 
171 /* multi function mode is supported on (5711+5711E FPGA+EMUL) and on (5711E ASIC) and on 5712E and 5713E */
172 #define IS_MF_MODE_CAPABLE(pdev) ((CHIP_NUM(pdev) == CHIP_NUM_5711E) || \
173                                   (CHIP_NUM(pdev) == CHIP_NUM_5712E) || \
174                                   (CHIP_IS_E3(pdev)))
175 
176 /* Macro for triggering PCIE analyzer: write to 0x2000 */
177 #define LM_TRIGGER_PCIE(_pdev)               \
178         {                                    \
179               u32_t kuku = 0xcafecafe;       \
180               REG_WR((_pdev), 0x2000, kuku); \
181         }
182 
183 // Send an attention on this Function.
184 #define LM_GENERAL_ATTN_INTERRUPT_SET(_pdev,_func)                REG_WR((_pdev),MISC_REG_AEU_GENERAL_ATTN_12 + 4*(_func),0x1)
185 /*******************************************************************************
186  * Constants.
187  ******************************************************************************/
188 #define MAX_PATH_NUM               2
189 #define E2_MAX_NUM_OF_VFS          64
190 #define E1H_FUNC_MAX               8
191 #define E2_FUNC_MAX                4   /* per path */
192 #define MAX_VNIC_NUM               4
193 #define MAX_FUNC_NUM               8   /* Common to all chips */
194 #define MAX_NDSB                   HC_SB_MAX_SB_E2
195 #define MAX_RSS_CHAINS             (16)   /* a constatnt for _HW_ limit */
196 #define MAX_HW_CHAINS              (64)   /* real E2/E3 HW limit of IGU blocks configured for function*/
197 
198 
199 typedef enum
200 {
201     LM_CLI_IDX_NDIS        =  0,
202     //LM_CLI_IDX_RDMA      =  1,
203     LM_CLI_IDX_ISCSI,  /* iSCSI idx must be after ndis+rdma */
204     LM_CLI_IDX_FCOE,   /* FCOE idx must be after ndis+rdma */
205     LM_CLI_IDX_FWD,
206     LM_CLI_IDX_OOO,
207     LM_CLI_IDX_MAX
208 } lm_cli_idx_t;
209 
210 typedef enum
211 {
212     LM_RESOURCE_NDIS          =  LM_CLI_IDX_NDIS,
213 //  LM_RESOURCE_RDMA          =  LM_CLI_IDX_RDMA,
214     LM_RESOURCE_ISCSI         =  LM_CLI_IDX_ISCSI, /* iSCSI idx must be after ndis+rdma */
215     LM_RESOURCE_FCOE          =  LM_CLI_IDX_FCOE, /* FCOE idx must be after ndis+rdma */
216     LM_RESOURCE_FWD           =  LM_CLI_IDX_FWD,
217     LM_RESOURCE_OOO           =  LM_CLI_IDX_OOO,
218     LM_RESOURCE_COMMON        =  LM_CLI_IDX_MAX,
219 } lm_resource_idx_t;
220 
221 struct sq_pending_command
222 {
223     d_list_entry_t           list;
224     u32_t                    cid;
225     u16_t                    type;
226     u8_t                     cmd;
227     u8_t                     flags;
228 #define SQ_PEND_RELEASE_MEM 0x1
229 #define SQ_PEND_COMP_CALLED 0x2
230 
231     struct slow_path_element command;
232 };
233 
234 #include "lm_desc.h"
235 #include "listq.h"
236 #include "lm.h"
237 #include "mm.h"
238 #include "ecore_sp_verbs.h"
239 #ifdef VF_INVOLVED
240 #include "lm_vf.h"
241 #endif
242 #include "lm_stats.h"
243 #include "lm_dmae.h"
244 #if !defined(_B10KD_EXT)
245 #include "bcm_utils.h"
246 #endif
247 
248 #define EVEREST 1
249 
250 /* non rss chains - ISCSI, FCOE, FWD, ISCSI OOO */
251 #define MAX_NON_RSS_CHAINS         (4)
252 
253 /* which of the non-rss chains need fw clients - ISCSI, FCOE*/
254 #define MAX_NON_RSS_FW_CLIENTS     (4)
255 
256 #define MAX_ETH_REG_CONS             (MAX_RSS_CHAINS + MAX_NON_RSS_CHAINS)
257 #define MAX_ETH_REG_CHAINS           (MAX_HW_CHAINS + MAX_NON_RSS_CHAINS)
258 
259 #define MAX_ETH_CONS                 (MAX_ETH_REG_CONS + MAX_ETH_TX_ONLY_CONS)
260 #define MAX_ETH_CHAINS               (MAX_ETH_REG_CHAINS + MAX_ETH_TX_ONLY_CONS)
261 
262 #ifndef VF_INVOLVED
263 #define MAX_VF_ETH_CONS             0
264 #endif
265 
266 #if defined(_VBD_) || defined (_VBD_CMD_)
267 #define MAX_TX_CHAIN(_pdev)               (3U*LM_SB_CNT(_pdev) + MAX_NON_RSS_CHAINS)
268 #define MAX_RX_CHAIN(_pdev)               (1U*LM_SB_CNT(_pdev) + MAX_NON_RSS_CHAINS)
269 #else
270 #define MAX_TX_CHAIN(_pdev)               (MAX_ETH_CONS)
271 #define MAX_RX_CHAIN(_pdev)               (MAX_ETH_REG_CONS)
272 #endif
273 
274 
275 #define ILT_NUM_PAGE_ENTRIES 3072
276 #define ILT_NUM_PAGE_ENTRIES_PER_FUNC 384
277 
278 /* According to the PCI-E Init document */
279 #define SEARCHER_TOTAL_MEM_REQUIRED_PER_CON 64
280 #define TIMERS_TOTAL_MEM_REQUIRED_PER_CON   8
281 #define QM_TOTAL_MEM_REQUIRED_PER_CON       (32*4)
282 
283 
284 /* Number of bits must be 10 to 25. */
285 #ifndef LM_PAGE_BITS
286 #define LM_PAGE_BITS                            12  /* 4K page. */
287 #endif
288 
289 #define LM_PAGE_SIZE                            (1 << LM_PAGE_BITS)
290 #define LM_PAGE_MASK                            (LM_PAGE_SIZE - 1)
291 
292 
293 /* Number of bits must be 10 to 25. */
294 #define LM_DQ_CID_BITS                          7  /* 128 Byte page. */
295 
296 #define LM_DQ_CID_SIZE                          (1 << LM_DQ_CID_BITS)
297 #define LM_DQ_CID_MASK                          (LM_DQ_CID_SIZE - 1)
298 
299 #define LM_VF_DQ_CID_BITS                            3  /* 8 Byte page. */
300 
301 #define LM_VF_DQ_CID_SIZE                            (1 << LM_VF_DQ_CID_BITS)
302 #define LM_VF_DQ_CID_MASK                            (LM_VF_DQ_CID_SIZE - 1)
303 
304 #define LM_ILT_ALIGNMENT                        0x1000 /* ILT assumes pages aligned to 4K NOTE: E1 has a bug,
305                                                         * in which page needs to be aligned to page-size
306                                                         */
307 
308 #define LM_ILT_ALIGNMENT_MASK                   (LM_ILT_ALIGNMENT - 1)
309 
310 #define LM_TIMERS_SCAN_POLL                     20000 /* 20 sec */
311 #define LM_TIMERS_SCAN_TIME                     1000 /*1m*/
312 #define LM_UNLOAD_TIME                          100000 /*100m in micros */
313 #if !defined(_VBD_CMD_)
314 #define LM_CID_RETURN_TIME                      2000  /*2 sec on emulation*/
315 #define LM_CID_RETURN_TIME_EMUL                 10000 /*10 sec on emulation*/
316 
317 #else
318 #define LM_CID_RETURN_TIME                      0
319 #define LM_CID_RETURN_TIME_EMUL                 0
320 #endif
321 
322 // TODO add for ASIC
323 #define LM_FREE_CID_DELAY_TIME(pdev)  ((pdev)->params.l4_free_cid_delay_time)
324 /*
325 #define LM_FREE_CID_DELAY_TIME(pdev) (CHIP_REV(pdev) == CHIP_REV_FPGA || CHIP_REV(pdev) == CHIP_REV_EMUL) ? LM_CID_RETURN_TIME_EMUL : LM_CID_RETURN_TIME;
326 */
327 
328 #define LM_EMUL_FACTOR 2000
329 #define LM_FPGA_FACTOR 200
330 
331 #ifndef CACHE_LINE_SIZE_MASK
332 #define CACHE_LINE_SIZE_MASK        0x3f
333 #define CACHE_LINE_SIZE             (CACHE_LINE_SIZE_MASK + 1)
334 #endif
335 
336 /*need to know from where can I take these values */
337 #define NVRAM_1MB_SIZE              0x20000  // 1M bit in bytes
338 #define NVRAM_PAGE_SIZE             256
339 
340 /* Number of packets per indication in calls to mm_indicate_rx/tx. */
341 #ifndef MAX_PACKETS_PER_INDICATION
342 #define MAX_PACKETS_PER_INDICATION  50
343 #endif
344 
345 // TODO - adjust to our needs - the limitation of the PBF
346 #ifndef MAX_FRAG_CNT
347 #define MAX_FRAG_CNT                33
348 #endif
349 #ifndef MAX_FRAG_CNT_PER_TB
350 /* MichalS TODO - do we want to leave it like this or calculate it according to connection params. */
351 #define MAX_FRAG_CNT_PER_TB         33  /* arbitrary(?) */
352 #endif
353 
354 /* The maximum is actually 0xffff which can be described by a BD. */
355 // TODO - adjust to our needs
356 #define MAX_FRAGMENT_SIZE           0xf000
357 
358 /* Maximum Packet Size: max jumbo frame: 9600 + ethernet-header+llc-snap+vlan+crc32 */
359 #define MAXIMUM_PACKET_SIZE 9632
360 
361 // TODO - adjust to our needs
362 /* Buffer size of the statistics block. */
363 #define CHIP_STATS_BUFFER_SIZE      ((sizeof(statistics_block_t) + \
364                                         CACHE_LINE_SIZE_MASK) & \
365                                         ~CACHE_LINE_SIZE_MASK)
366 
367 // Status blocks type per storm - used for initialization
368 #define STATUS_BLOCK_INVALID_TYPE       0
369 #define STATUS_BLOCK_SP_SL_TYPE         1
370 #define STATUS_BLOCK_NORMAL_TYPE        2
371 #define STATUS_BLOCK_NORMAL_SL_TYPE     3
372 
373 #define LM_DEF_NO_EVENT_ACTIVE          0x00000000
374 #define LM_DEF_ATTN_ACTIVE              (1L<<0)
375 #define LM_SP_ACTIVE                    (LM_DEF_USTORM_ACTIVE | LM_DEF_CSTORM_ACTIVE | LM_DEF_XSTORM_ACTIVE | LM_DEF_TSTORM_ACTIVE)
376 
377 #define LM_DEF_USTORM_ACTIVE            (1L<<1)
378 #define LM_DEF_CSTORM_ACTIVE            (1L<<2)
379 #define LM_DEF_XSTORM_ACTIVE            (1L<<3)
380 #define LM_DEF_TSTORM_ACTIVE            (1L<<4)
381 
382 #define LM_DEF_EVENT_MASK               0xffff
383 
384 #define LM_NON_DEF_USTORM_ACTIVE        (1L<<16)
385 #define LM_NON_DEF_CSTORM_ACTIVE        (1L<<17)
386 #define LM_NON_DEF_EVENT_MASK           0xffff0000
387 
388 #define ATTN_NIG_FOR_FUNC               (1L << 8)
389 #define ATTN_SW_TIMER_4_FUNC            (1L << 9)
390 #define GPIO_2_FUNC                     (1L << 10)
391 #define GPIO_3_FUNC                     (1L << 11)
392 #define GPIO_4_FUNC                     (1L << 12)
393 #define ATTN_GENERAL_ATTN_1             (1L << 13)
394 #define ATTN_GENERAL_ATTN_2             (1L << 14)
395 #define ATTN_GENERAL_ATTN_3             (1L << 15)
396 
397 #define ATTN_NIG_FOR_FUNC1               (1L << 8)
398 #define ATTN_SW_TIMER_4_FUNC1            (1L << 9)
399 #define GPIO_2_FUNC1                     (1L << 10)
400 #define GPIO_3_FUNC1                     (1L << 11)
401 #define GPIO_4_FUNC1                     (1L << 12)
402 #define ATTN_GENERAL_ATTN_4              (1L << 13)
403 #define ATTN_GENERAL_ATTN_5              (1L << 14)
404 #define ATTN_GENERAL_ATTN_6              (1L << 15)
405 
406 #define ATTN_HARD_WIRED_MASK        0xff00
407 
408 #define HC_SEG_ACCESS_DEF           0   /*Driver decision 0-3*/
409 #define HC_SEG_ACCESS_ATTN          4
410 
411 #define HC_SEG_ACCESS_NORM          0   /*Driver decision 0-1*/
412 
413 //Buffer size of the status block. This is the same for host_def_status_block, they are the same size.
414 //TODO: check the cache line issue! do we need it as in Teton?
415 #define E2_STATUS_BLOCK_BUFFER_SIZE     ((sizeof(struct host_hc_status_block_e2) + \
416                                         CACHE_LINE_SIZE_MASK) & \
417                                         ~CACHE_LINE_SIZE_MASK)
418 
419 #define E1X_STATUS_BLOCK_BUFFER_SIZE     ((sizeof(struct host_hc_status_block_e1x) + \
420                                         CACHE_LINE_SIZE_MASK) & \
421                                         ~CACHE_LINE_SIZE_MASK)
422 
423 #define DEF_STATUS_BLOCK_BUFFER_SIZE ((sizeof(struct host_sp_status_block) + \
424                                         CACHE_LINE_SIZE_MASK) & \
425                                         ~CACHE_LINE_SIZE_MASK)
426 
427 /* This is the def and non-def status block ID format according to spec --> used for debugging purpose only */
428 #define DBG_SB_ID(port,stormID,cpuID) (((port) << 7) | ((stormID) << 5) | (cpuID))
429 #define DBG_DEF_SB_ID(port,stormID,vnicID) (((port) << 7) | ((stormID) << 5) | (0x10+vnicID)) /* the ID is for debugging purposes, it's not looked at by hw/fw*/
430 
431 #define SB_RX_INDEX(pdev, index)     ((pdev)->vars.u_hc_ack[index])
432 #define SB_TX_INDEX(pdev, index)     ((pdev)->vars.c_hc_ack[index])
433 
434 #define SB_INDEX_OF_USTORM(pdev, index)     ((pdev)->vars.u_hc_ack[index])
435 //#define SB_INDEX_OF_CSTORM(pdev, index)     ((pdev)->vars.c_hc_ack[index])
436 
437 #define DEF_SB_INDEX(pdev)                  ((pdev)->vars.hc_def_ack)
438 #define DEF_SB_INDEX_OF_ATTN(pdev)          ((pdev)->vars.attn_def_ack)
439 
440 //_________________________________________________________________________________________________--
441 
442 #define NUM_OF_ELT_PAGES 16 // this is the size of the elt in the hw
443 #define DEF_STATUS_BLOCK_IGU_INDEX 16 //MAX_NDSB //this is where the default status block lies (that is VBD's static index of default status block)
444 #define DEF_STATUS_BLOCK_INDEX HC_SP_SB_ID //this is where the default status block lies (that is VBD's static index of default status block)
445 #define MAX_DYNAMIC_ATTN_GRPS 8 //this is the 8 non hard-wired groups configured by the driver (exc. PXP,NIG)
446 #define MAX_NUM_BAR 3 // number of bars suported by the hw 1 bar in first phase emulation
447 #define MAX_NUM_VF_BAR 3
448 
449 #define BAR_0 0 //index for BAR0
450 #define BAR_1 1 //index for BAR1
451 #define BAR_2 2 //index for BAR2
452 
453 /* HW RSS configuration */
454 #define RSS_INDIRECTION_TABLE_SIZE  0x80    /* Maximum indirection table. */
455 #define RSS_HASH_KEY_SIZE           0x28    /* Maximum key size. */
456 
457 /* RX BD to RX CQE size ratio */
458 #define LM_RX_BD_CQ_SIZE_RATIO      (sizeof(union eth_rx_cqe) / sizeof(struct eth_rx_bd))
459 
460 /*******************************************************************************
461  * Macros.
462  ******************************************************************************/
463 #ifndef OFFSETOF
464 #define OFFSETOF(_s, _m)    ((u32_t) PTR_SUB(&((_s *) 0)->_m, (u8_t *) 0))
465 #endif
466 #define WORD_ALIGNED_OFFSETOF(_s, _m)       (OFFSETOF(_s, _m) & ~0x03)
467 
468 /* warning NOT side effect safe dont use this with CEIL_DIV( a++,b) */
469 #define CEIL_DIV( a, b )    ((a / b) + ( (a % b) ? 1 : 0))
470 
471 /**
472  * @description
473  *  Should be moved to a common place.
474  *  Find the next power of 2 that is larger than "num".
475  * @param num - The variable to find a power of 2 that is
476  *            larger.
477  * @param num_bits_supported - The largest number of bits
478  *                           supported
479  *
480  * @return u32_t - The next power of 2 that is larger than
481  *         "num".
482  */
483 u32_t upper_align_power_of_2(IN const u16_t num, IN const u8_t num_bits_supported);
484 
485 
486 /*
487    The attention lines works with the state machine below for parallel computation:
488 
489    cols:     0 1 2 3 4 5 6 7
490    _________________________
491    Attn_bits 0 0 1 1 0 0 1 1
492    Attn_ack  0 1 0 1 0 1 0 1
493    State     0 0 0 0 1 1 1 1
494 
495    cols: 0,1,6,7 - NOP
496    cols: 3,4     - ASSERT
497    cols: 2       - Assertion procedure
498    cols: 5       - Deassertion procedure
499 */
500 #define GET_ATTN_CHNG_GROUPS(_pdev, _attn_bits, _attn_ack, _asserted_grps_ptr, _deasserted_grps_ptr) \
501     {                                                                         \
502         u16_t _state = (_pdev)->vars.attn_state;                              \
503                                                                               \
504         DbgBreakIf(~(_attn_bits ^ _attn_ack) & (_attn_bits ^ _state));        \
505                                                                               \
506         *(_asserted_grps_ptr)    =  _attn_bits & ~_attn_ack & ~_state;        \
507         *(_deasserted_grps_ptr)  = ~_attn_bits &  _attn_ack &  _state;        \
508     }
509 
510 /* Finds out whether a specific unicore interrupt has caused the NIG attn to get asserted.
511  * If this is the case, need to adjust the portion of bits of the NIG config status interrupt register
512  * to the value read from the unicore interrupt register.
513  * We use here a "bit overwrite" instead of just a "bit flip" since the value read from the
514  * unicore interrupt register might be spread over more than a single bit!
515  */
516 #define HANDLE_UNICORE_INT_ASSERTED(_pdev, _nig_reg_name, _unicore_intr_val_ptr, _unicore_intr_name, _nig_status_port_ptr, _is_unicore_assrtd_ptr, _unicore_intr_size)  \
517     {                                                                                                                                         \
518         *(_unicore_intr_val_ptr) = REG_RD(_pdev, _nig_reg_name);                                                                     \
519         *(_is_unicore_assrtd_ptr) = ( ( *(_unicore_intr_val_ptr) << _unicore_intr_size) ^ (*(_nig_status_port_ptr) & _unicore_intr_name));    \
520                                                                                                                                               \
521         if (*(_is_unicore_assrtd_ptr))                                                                                                        \
522         {                                                                                                                                     \
523             DbgMessage(_pdev, WARN, "lm_handle_assertion_processing(): " #_unicore_intr_name " asserted!\n");                                \
524             *(_nig_status_port_ptr)  = (*(_nig_status_port_ptr) & ~(_unicore_intr_name)) | (*(_unicore_intr_val_ptr) << _unicore_intr_size);  \
525         }                                                                                                                                     \
526     }
527     // *(_nig_status_port_ptr) ^= ( 0x1 << _unicore_intr_size);
528 
529 
530 /*******************************************************************************
531  * Statistics.
532  ******************************************************************************/
533 typedef struct _lm_rx_statistics_t
534 {
535     u32_t aborted;
536 } lm_rx_stats_t;
537 
538 /*******************************************************************************
539  * Packet descriptor.
540  ******************************************************************************/
541 
542 typedef struct _lm_coalesce_buffer_t
543 {
544     s_list_entry_t link;
545 
546     u8_t *mem_virt;
547     u32_t buf_size;
548     lm_frag_list_t frags; /* coalesce buf is a frag list with 1 frag */
549 } lm_coalesce_buffer_t;
550 
551 typedef struct _lm_client_con_params_t
552 {
553     u32_t       mtu;
554     u32_t       lah_size;
555     u32_t       num_rx_desc;
556     u32_t       num_tx_desc;
557     u8_t        attributes;
558     #define     LM_CLIENT_ATTRIBUTES_RX     (0x1)
559     #define     LM_CLIENT_ATTRIBUTES_TPA    (0x2)
560     #define     LM_CLIENT_ATTRIBUTES_TX     (0x4)
561     #define     LM_CLIENT_ATTRIBUTES_REG_CLI    (0x8)
562 } lm_client_con_params_t;
563 
564 typedef struct _lm_packet_t
565 {
566     /* Must be the first entry in this structure. */
567     s_list_entry_t link;
568 
569     lm_status_t status;
570     u32_t size;
571 
572     union _lm_pkt_info_t
573     {
574         struct _lm_tx_pkt_info_t
575         {
576             lm_coalesce_buffer_t *coalesce_buf;
577             u16_t next_bd_idx;
578 
579             u16_t bd_used;
580             u8_t span_pages;
581             u8_t _pad1;
582             u8_t  hdr_nbds;
583 
584             u16_t reserve;
585 
586             // TODO - Do we want this stuff ????
587             #if DBG
588             struct eth_tx_bd *dbg_start_bd;
589             u16_t dbg_start_bd_idx;
590             u16_t dbg_frag_cnt;
591             #endif
592         } tx;
593 
594         struct _lm_rx_pkt_info_t
595         {
596             u16_t next_bd_idx;
597             u8_t  qidx;         // VBD mapping to RSS queue.
598 #define LM_MAX_SGES_FOR_PACKET 1 // TODO_QG rename to LM_MAX_FW_SGES_FOR_PACKET
599             lm_address_t mem_phys[1+LM_MAX_SGES_FOR_PACKET]; // arrays content:
600                                                              // bd ring address[0] + sge addresses[1] (optional)
601                                                              // (currently one)
602             u32_t*       hash_val_ptr;
603 
604             #if DBG
605             struct eth_rx_sge *dbg_sge;
606             struct eth_rx_bd  *dbg_bd;
607             #endif
608             union eth_sgl_or_raw_data sgl_or_raw_data; // currently used by OOO_CID. upper layer should handle endianity!
609         } rx;
610     } u1; // _lm_pkt_info_t
611 
612     lm_pkt_tx_info_t*         l2pkt_tx_info;
613     lm_pkt_rx_info_t*         l2pkt_rx_info;
614 
615 } lm_packet_t;
616 
617 DECLARE_FRAG_LIST_BUFFER_TYPE(lm_packet_frag_list_t, MAX_FRAG_CNT);
618 
619 /*******************************************************************************
620  * Configurable parameters for the hardware dependent module.
621  ******************************************************************************/
622 
623 // I only want this enum for LLFC_TRAFFIC_TYPE_MAX value (should be HSI and fixed by FW)
624 typedef enum _driver_traafic_type_t
625 {
626     LLFC_DRIVER_TRAFFIC_TYPE_NW         = 0,
627     LLFC_DRIVER_TRAFFIC_TYPE_FCOE,
628     LLFC_DRIVER_TRAFFIC_TYPE_ISCSI,
629     LLFC_DRIVER_TRAFFIC_TYPE_MAX
630 }driver_traafic_type_t;
631 typedef struct _app_params_t
632 {
633     u32_t enabled;
634     u32_t traffic_type_priority[LLFC_DRIVER_TRAFFIC_TYPE_MAX];
635 }app_params_t;
636 //Cos DCBX params
637 #define DCBX_COS_MAX_NUM_E2E3A0                 (ELINK_DCBX_E2E3_MAX_NUM_COS)
638 // This define is different than CLC, because CLC currently supports the Max number of COS
639 #define DCBX_COS_MAX_NUM_E3B0                   (min(3,ELINK_DCBX_E3B0_MAX_NUM_COS))
640 #define DCBX_COS_MAX_NUM                        3 //(max(DCBX_COS_MAX_NUM_E2,DCBX_COS_MAX_NUM_E3B0))
641 
642 
643 typedef struct _dcbx_cos_params_t
644 {
645     u32_t                   bw_tbl;
646     u32_t                   pri_bitmask;
647     u8_t    s_pri;
648     /**
649     *   valid values are 0 - 5. 0 is highest strict priority.
650     *   There can't be two COS's with the same pri. *
651     */
652 #define DCBX_S_PRI_INVALID                  (DCBX_COS_MAX_NUM)
653 #define DCBX_S_PRI_COS_HIGHEST              (0)
654 #define DCBX_S_PRI_COS_NEXT_LOWER_PRI(_sp)  ((_sp) + 1)
655     u8_t    pauseable; // This value is obsolete in CHIP_IS_E3B0
656                        // (pdev) and is only for debugging CHIP_IS_E2E3(pdev)
657 }dcbx_cos_params_t;
658 
659 typedef struct _pg_params_t
660 {
661     u32_t                   enabled;
662     #define LM_DCBX_ETS_IS_ENABLED(_pdev)       ((TRUE == IS_DCB_ENABLED(pdev)) && \
663                                                  (TRUE == ((_pdev)->params.dcbx_port_params.ets.enabled)))
664     u8_t                    num_of_cos; //valid COS entries
665     dcbx_cos_params_t       cos_params[DCBX_COS_MAX_NUM];
666 }pg_params_t;
667 
668 typedef struct _pfc_params_t
669 {
670     u32_t enabled;
671     u32_t priority_non_pauseable_mask;
672     #define LM_DCBX_PFC_PRI_NON_PAUSE_MASK(_pdev)               (_pdev->params.dcbx_port_params.pfc.priority_non_pauseable_mask)
673     #define LM_DCBX_PFC_PRI_PAUSE_MASK(_pdev)                   ((u8_t)(~LM_DCBX_PFC_PRI_NON_PAUSE_MASK(_pdev)))
674     #define LM_DCBX_PFC_PRI_MASK                                (0xFF)
675     #define LM_DCBX_PFC_PRI_GET_PAUSE(_pdev,_pg_pri)            (_pg_pri & LM_DCBX_PFC_PRI_PAUSE_MASK(_pdev))
676     #define LM_DCBX_PFC_PRI_GET_NON_PAUSE(_pdev,_pg_pri)        (LM_DCBX_PFC_PRI_NON_PAUSE_MASK(_pdev) & _pg_pri)
677     #define LM_DCBX_IS_PFC_PRI_SOME_PAUSE(_pdev,_pg_pri)        (0 != LM_DCBX_PFC_PRI_GET_PAUSE(_pdev,_pg_pri))
678     #define LM_DCBX_IS_PFC_PRI_ONLY_PAUSE(_pdev,_pg_pri)        (_pg_pri == LM_DCBX_PFC_PRI_GET_PAUSE(_pdev,_pg_pri))
679     #define LM_DCBX_IS_PFC_PRI_ONLY_NON_PAUSE(_pdev,_pg_pri)    (_pg_pri == LM_DCBX_PFC_PRI_GET_NON_PAUSE(_pdev,_pg_pri))
680     #define LM_DCBX_IS_PFC_PRI_MIX_PAUSE(_pdev,_pg_pri)         (!(LM_DCBX_IS_PFC_PRI_ONLY_NON_PAUSE(_pdev,_pg_pri) || \
681                                                                    LM_DCBX_IS_PFC_PRI_ONLY_PAUSE(_pdev,_pg_pri)))
682 }pfc_params_t;
683 
684 typedef struct _dcbx_port_params_t
685 {
686     u32_t dcbx_enabled;
687     pfc_params_t pfc;
688     pg_params_t  ets;
689     app_params_t app;
690 }dcbx_port_params_t;
691 
692 
693 typedef enum
694 {
695     DCBX_READ_LOCAL_MIB,
696     DCBX_READ_REMOTE_MIB
697 }dcbx_read_mib_type;
698 
699 typedef enum
700 {
701     DCBX_UPDATE_TASK_STATE_FREE,
702     DCBX_UPDATE_TASK_STATE_SCHEDULE,
703     DCBX_UPDATE_TASK_STATE_HANDLED
704 } dcbx_update_task_state;
705 
706 typedef enum
707 {
708     LM_SINGLE_SM             = 0, /* default */
709     LM_DOUBLE_SM_SINGLE_IGU  = 1,
710     LM_DOUBLE_SM_DOUBLE_IGU  = 2
711 } fw_ndsb_type;
712 
713 typedef enum
714 {
715     LM_COS_MODE_COS3 = 0,
716     LM_COS_MODE_COS6 = 1
717 } lm_cos_modes ;
718 
719 typedef enum
720 {
721     LM_COS_MODE_OVERRIDE = 0,
722     LM_COS_MODE_STATIC   = 1
723 } lm_network_cos_modes ;
724 
725 
726 typedef enum
727 {
728     LM_AUTOGREEEN_DISABLED = 0,
729     LM_AUTOGREEEN_ENABLED  = 1,
730     LM_AUTOGREEEN_NVRAM    = 2
731 } lm_autogreeen_t ;
732 
733 /*** This i2c section should be in common .h file with EMC... ***/
734 
735 #define I2C_BINARY_SIZE 256
736 #define I2C_A2_DYNAMIC_OFFSET 0
737 #define I2C_A2_DYNAMIC_SIZE 128
738 
739 #define I2C_A2_STATIC_OFFSET 128
740 #define I2C_A2_STATIC_SIZE 128
741 
742 typedef enum
743 {
744     I2C_SECTION_A0  = 0,
745     I2C_SECTION_A2  = 1,
746     I2C_SECTION_MAX = 2
747 } i2c_section_t;
748 
749 typedef struct _i2c_binary_info_t
750 {
751     u32_t   last_query_status[I2C_SECTION_MAX];
752     u64_t   last_query_ts;
753     u32_t   reserved[10];
754     u8_t    ax_data[I2C_SECTION_MAX][I2C_BINARY_SIZE];
755 } i2c_binary_info_t;
756 
757 /*** This i2c section should be in common .h file with EMC... ***/
758 
759 typedef struct _lm_params_t
760 {
761     /* This value is used by the upper module to inform the protocol
762      * of the maximum transmit/receive packet size.  Packet size
763      * ranges from 1500-9600 bytes.  This value does not include ETH_PACKET_LEN, LLC-SNAP, VLAN tag, CRC32
764      */
765     u32_t mtu[LM_CLI_IDX_MAX];
766     #define LM_MTU_INVALID_VALUE            (0xFFFFFFFF)
767     u32_t mtu_max;
768 
769     #define MAX_CLI_PACKET_SIZE(pdev, chain_idx) ((u16_t)(pdev)->params.l2_cli_con_params[(chain_idx)].mtu + (pdev)->params.rcv_buffer_offset + ETHERNET_PACKET_HEADER_SIZE+ ETHERNET_VLAN_TAG_SIZE + ETHERNET_LLC_SNAP_SIZE + CACHE_LINE_SIZE)
770     #define CLI_MTU_WITH_ETH_HDR_SIZE(pdev, chain_idx) ((u16_t)(pdev)->params.l2_cli_con_params[(chain_idx)].mtu + ETHERNET_PACKET_HEADER_SIZE)
771     #define MAX_L2_CLI_BUFFER_SIZE(pdev, chain_idx) ((MAX_CLI_PACKET_SIZE(pdev, chain_idx) + CACHE_LINE_SIZE_MASK) & \
772                                        ~CACHE_LINE_SIZE_MASK)
773 
774     #define LM_MTU_NDIS_DEFAULT             (1500)
775     #define LM_MTU_ISCSI_DEFAULT            (1500)
776     #define LM_MTU_FCOE_DEFAULT             (2500)
777     #define LM_MTU_FWD_DEFAULT              (LM_MTU_NDIS_DEFAULT)
778 
779     #define LM_MTU_FLOW_CTRL_TX_THR         (5000)
780     #define LM_MTU_MAX_DEFAULT              (1500)
781     #define LM_MTU_MAX                      (9600)
782     /* Current node address.  The MAC address is initially set to the
783      * hardware address.  This entry can be modified to allow the driver
784      * to override the default MAC address.  The new MAC address takes
785      * effect after a driver reset. */
786     u8_t mac_addr[8];
787 
788     /* parameters for tx/rx chians.
789        1 for all rss chains, and 1 more for each non-rss chain */
790     u32_t l2_rx_desc_cnt[1+MAX_NON_RSS_CHAINS];
791     u32_t l2_tx_bd_page_cnt[1+MAX_NON_RSS_CHAINS];
792     u32_t l2_tx_coal_buf_cnt[1+MAX_NON_RSS_CHAINS];
793     lm_client_con_params_t l2_cli_con_params[3*MAX_HW_CHAINS + MAX_NON_RSS_CHAINS];
794 
795     /* All the L2 receive buffers start at a cache line size aligned
796      * address.  This value determines the location of the L2 frame header
797      * from the beginning of the receive buffer. */
798     u32_t rcv_buffer_offset;
799 
800     /* network type for defintion of max cwnd */
801     u32_t network_type;
802     #define LM_NETOWRK_TYPE_LAN                  0
803     #define LM_NETOWRK_TYPE_WAN                  1
804     #define LM_NETOWRK_TYPE_AUTO                 2 /* Linux only */
805     u32_t max_cwnd_wan;
806     u32_t max_cwnd_lan;
807 
808     u32_t cid_allocation_mode;
809     #define LM_CID_ALLOC_REGULAR                 1
810     #define LM_CID_ALLOC_DELAY                   2 /* delay cid allocation when there are no free cids but there are
811                                                     * cids pending allocation */
812     #define LM_CID_ALLOC_NUM_MODES               2
813 
814 
815     u32_t ndsb_type;
816 
817     u32_t int_coalesing_mode;
818     #define LM_INT_COAL_NONE                     0
819     #define LM_INT_COAL_PERIODIC_SYNC            1 /* default */
820     #define LM_INT_COAL_NUM_MODES                2
821     u32_t int_per_sec_rx_override;
822     u32_t int_per_sec_rx[HC_USTORM_SB_NUM_INDICES];
823     u32_t int_per_sec_tx_override;
824     u32_t int_per_sec_tx[HC_CSTORM_SB_NUM_INDICES];
825 
826     /* VF interrupt moderation (Low, Medium, High) parameters */
827     u32_t vf_int_per_sec_rx[3];
828     u32_t vf_int_per_sec_tx[3];
829 #define LM_VF_INT_LOW_IDX       0
830 #define LM_VF_INT_MEDIUM_IDX    1
831 #define LM_VF_INT_HIGH_IDX      2
832     /* all protocols dynamic coalescing params */
833     u32_t enable_dynamic_hc[HC_DHC_SB_NUM_INDICES];
834     u32_t hc_timeout0[2][HC_DHC_SB_NUM_INDICES];
835     u32_t hc_timeout1[2][HC_DHC_SB_NUM_INDICES];
836     u32_t hc_timeout2[2][HC_DHC_SB_NUM_INDICES];
837     u32_t hc_timeout3[2][HC_DHC_SB_NUM_INDICES];
838     u32_t hc_threshold0[2];
839     u32_t hc_threshold1[2];
840     u32_t hc_threshold2[2];
841     u32_t l2_dynamic_hc_min_bytes_per_packet;
842     u32_t l4_hc_scaling_factor;
843 
844     u32_t l4_hc_ustorm_thresh;
845     u32_t l4_scq_page_cnt;
846     u32_t l4_rcq_page_cnt;
847     u32_t l4_grq_page_cnt;
848     u32_t l4_preallocate_cnt;
849     u32_t l4_preallocate_blk_size;
850     u32_t l4_preallocate_retry_cnt;
851 
852 #if defined(_VBD_) || defined(_VBD_CMD_)
853     #define NUM_BUFS_FOR_GRQS(pdev) \
854                                     (pdev)->params.l4_grq_page_cnt*512*(LM_TOE_RSS_CHAIN_CNT(pdev))
855 #else
856     #define NUM_BUFS_FOR_GRQS(pdev) \
857                                   (pdev)->params.l4_grq_page_cnt*512*1
858 #endif
859 //    #define NUM_BUFS_FOR_GRQS(pdev)
860 //   (pdev)->params.l4_grq_page_cnt*512*(LM_TOE_RSS_CHAIN_CNT(pdev))
861 
862     u32_t l4_tx_chain_page_cnt;
863     u32_t l4_rx_chain_page_cnt;
864     u32_t l4_gen_buf_size;              /* minimum size of generic buffer */
865     u32_t l4_history_cqe_cnt;           /* how much history to save       */
866 
867     /* DCA Related params */
868     u32_t l4_ignore_grq_push_enabled; /* Configuration passed to fw whether to ignore push on grq or not */
869 
870     u32_t l4cli_flags;             /* such as LLC_SNAP*/
871     u32_t l4cli_ticks_per_second;
872     u32_t l4cli_ack_frequency;
873     u32_t l4cli_delayed_ack_ticks;
874     u32_t l4cli_max_retx;
875     u32_t l4cli_doubt_reachability_retx;
876     u32_t l4cli_sws_prevention_ticks;
877     u32_t l4cli_dup_ack_threshold;
878     u32_t l4cli_push_ticks;
879     u32_t l4cli_nce_stale_ticks;
880     u32_t l4cli_starting_ip_id;
881 
882     /* Various test/debug modes.  Any validation failure will cause the
883      * driver to write to misc.swap_diag0 with the corresponding flag.
884      * The intention is to trigger the bus analyzer. */
885     // TODO - adjust to our needs
886     u32_t test_mode;
887     #define TEST_MODE_DISABLED                  0x00
888     #define TEST_MODE_OBSOLETE_0                0x01    /* was TEST_MODE_IKOS */
889     #define TEST_MODE_OBSOLETE_1                0x02    /* was TEST_MODE_FPGA */
890     #define TEST_MODE_VERIFY_RX_CRC             0x10
891     #define TEST_MODE_RX_BD_TAGGING             0x20
892     #define TEST_MODE_TX_BD_TAGGING             0x40
893     #define TEST_MODE_LOG_REG_ACCESS            0x80
894     #define TEST_MODE_SAVE_DUMMY_DMA_DATA       0x0100
895     #define TEST_MODE_INIT_GEN_BUF_DATA         0x0200
896     #define TEST_MODE_DRIVER_PULSE_ALWAYS_ALIVE 0x0400
897     #define TEST_MODE_IGNORE_SHMEM_SIGNATURE    0x0800
898     #define TEST_MODE_NO_MCP                    0x1000
899 
900     lm_offload_t ofld_cap;
901     lm_offload_t ofld_cap_to_ndis;
902 
903     lm_wake_up_mode_t wol_cap;
904 
905     lm_flow_control_t flow_ctrl_cap;
906     lm_eee_policy_t eee_policy;
907     lm_medium_t req_medium;
908 
909     u32_t selective_autoneg;
910     #define SELECTIVE_AUTONEG_OFF                   0
911     #define SELECTIVE_AUTONEG_SINGLE_SPEED          1
912     #define SELECTIVE_AUTONEG_ENABLE_SLOWER_SPEEDS  2
913 
914     u32_t wire_speed;                           /* Not valid on SERDES. */
915 
916     /* Ways for the MAC to determine a link change. */
917     u32_t phy_int_mode;
918     #define PHY_INT_MODE_AUTO                   0
919     #define PHY_INT_MODE_MI_INTERRUPT           1
920     #define PHY_INT_MODE_LINK_READY             2
921     #define PHY_INT_MODE_AUTO_POLLING           3
922 
923     /* Ways for the driver to get the link change event. */
924     u32_t link_chng_mode;
925     #define LINK_CHNG_MODE_AUTO                 0
926     #define LINK_CHNG_MODE_USE_STATUS_REG       1
927     #define LINK_CHNG_MODE_USE_STATUS_BLOCK     2
928 
929     /* Ways for the driver to determine which phy to prefer in case of dual media. */
930     u32_t phy_priority_mode;
931     #define PHY_PRIORITY_MODE_HW_DEF            0
932     #define PHY_PRIORITY_MODE_10GBASET          1
933     #define PHY_PRIORITY_MODE_SERDES            2
934     #define PHY_PRIORITY_MODE_HW_PIN            3
935 
936     u32_t interrupt_mode; /* initialized by um to state whether we are using MSI-X or not, determined after we receive resources from OS */
937     #define LM_INT_MODE_INTA 0
938     #define LM_INT_MODE_SIMD 1 /* Single ISR / Multiple DPC */
939     #define LM_INT_MODE_MIMD 2 /* Multiple ISR / Multple DPC */
940 
941     /* Relevant only for E2, and defines how the igu will be worked with (via GRC / BAR). Default will be set to BAR,
942      * the defines for this are INTR_BLK_ACCESS_GRC, INTR_BLK_ACCESS_IGUMEM */
943     u32_t igu_access_mode;
944 
945     u32_t sw_config;
946     #define LM_SWCFG_1G                         0
947     #define LM_SWCFG_10G                        1
948     #define LM_SWCFG_AD                         2
949     #define LM_SWCFG_OT_AD                      3
950     #define LM_SWCFG_HW_DEF                     4
951 
952     u8_t mf_mode; //use enum mf_mode
953     u8_t sd_mode;
954     u8_t pad[2];
955 
956     #define IS_MF_AFEX(_pdev) IS_MF_AFEX_MODE(_pdev)
957     #define IS_MF_AFEX_MODE(_pdev) (IS_MULTI_VNIC(_pdev) && ((_pdev)->params.mf_mode == MULTI_FUNCTION_AFEX))
958     #define IS_MF_SI_MODE(_pdev)  (IS_MULTI_VNIC(_pdev) && ((_pdev)->params.mf_mode == MULTI_FUNCTION_SI))
959     #define IS_MF_SD_MODE(_pdev)  (IS_MULTI_VNIC(_pdev) && ((_pdev)->params.mf_mode == MULTI_FUNCTION_SD))
960     #define IS_SD_REGULAR_MODE(_pdev)  (IS_MF_SD_MODE(_pdev) && ((_pdev)->params.sd_mode == SD_REGULAR_MODE))
961     #define IS_SD_UFP_MODE(_pdev)  (IS_MF_SD_MODE(_pdev) && ((_pdev)->params.sd_mode == SD_UFP_MODE))
962     #define IS_SD_BD_MODE(_pdev)  (IS_MF_SD_MODE(_pdev) && ((_pdev)->params.sd_mode == SD_BD_MODE))
963 
964     lm_autogreeen_t autogreeen; // autogrEEEn support
965 
966     u32_t tmr_reload_value1;
967 
968     u32_t max_func_connections;  // Number of connection supported by this function.
969     /* TODO: init max_toe/max_rdma from somewhere else should come from licence info */
970     u32_t max_supported_toe_cons;
971     u32_t max_func_toe_cons;        // Number of TOE connections supported
972     u32_t max_func_rdma_cons;       // Number of RDMA connections supported
973     u32_t max_func_iscsi_cons;      // Number of iSCSI connections supported
974     u32_t max_func_fcoe_cons;       // Number of FCoE connections supported
975     u32_t max_fcoe_task;            // Number of FCoE max_fcoe_exchanges
976     u32_t max_eth_including_vfs_conns;
977     u32_t context_line_size; //Size of the context as configured in the CDU.
978     u32_t context_waste_size; // Waste size as configured in the CDU.
979     u32_t num_context_in_page;
980     u32_t client_page_size; // Client memory page size.
981     u32_t elt_page_size; // ELT page size.
982     u32_t ilt_client_page_size; // ILT clients page size. We will give all client same page size. All ports as well.
983     u32_t cfc_last_lcid; // number of supported connections in CFC - 1
984     u32_t bandwidth_min; //The last value of min CMNG bandwidth configured by BACS
985     u32_t bandwidth_max; //The last value of max CMNG bandwidth configured by BACS
986 
987     /* vnic parameters */
988     /* Relative Function Number */
989     u8_t pfunc_rel;
990     #define PORT_ID_PARAM_FUNC_REL(_pfunc_rel)              ((_pfunc_rel) & 1)   //0 or 1
991     #define PORT_ID_PARAM_FUNC_ABS(_chip_num, _port_mode, _pfunc_abs)   (lm_get_port_id_from_func_abs(_chip_num, _port_mode, _pfunc_abs))   //0 or 1
992     #define PORT_ID(pdev)                                   (PORT_ID_PARAM_FUNC_REL(PFDEV(pdev)->params.pfunc_rel))   //0 or 1
993     #define FUNC_ID(pdev)               (PFDEV(pdev)->params.pfunc_rel)       //0-7
994     #define VNIC_ID_PARAM_FUNC_REL(_pfunc_rel)              ((_pfunc_rel) >> 1)  //0, 1, 2 or 3
995     #define VNIC_ID(pdev)                                   (VNIC_ID_PARAM_FUNC_REL(PFDEV(pdev)->params.pfunc_rel))  //0, 1, 2 or 3
996     #define LM_FOREACH_FUNC_IN_PORT(pdev, func) \
997         for ((func) = PORT_ID(pdev); (func) < E1H_FUNC_MAX; (func)+=2)
998 
999     #define LM_PFS_PER_PORT(pdev) \
1000         ((LM_CHIP_PORT_MODE_4 == CHIP_PORT_MODE(pdev)) ? 2 : 4 )
1001 
1002     #define LM_FIRST_ABS_FUNC_IN_PORT(pdev) \
1003         ((LM_CHIP_PORT_MODE_NONE == CHIP_PORT_MODE(pdev))? PORT_ID(pdev) : (PATH_ID(pdev)+2*PORT_ID(pdev)))
1004 
1005     #define LM_FOREACH_ABS_FUNC_IN_PORT(pdev, func) \
1006         for ( (func) = LM_FIRST_ABS_FUNC_IN_PORT(pdev) ; (func) < MAX_FUNC_NUM; (func) += (MAX_FUNC_NUM/LM_PFS_PER_PORT(pdev)) )
1007 
1008 
1009     #define FUNC_MAILBOX_ID_PARAM(_port,_vnic,_chip_num, _port_mode)    ((_port) + (_vnic) * ((CHIP_IS_E1x_PARAM(_chip_num) || (_port_mode == LM_CHIP_PORT_MODE_4))? 2 : 1))
1010     #define FUNC_MAILBOX_ID(pdev)                           (FUNC_MAILBOX_ID_PARAM(PORT_ID(pdev) ,VNIC_ID(pdev),CHIP_NUM(pdev), CHIP_PORT_MODE(pdev)))
1011     /* Absolute Function Number */
1012     u8_t pfunc_abs;
1013     #define ABS_FUNC_ID(pdev)    (PFDEV(pdev)->params.pfunc_abs)
1014     #define LM_FOREACH_FUNC_MAILBOX_IN_PORT(pdev, func) \
1015         for ((func) = PORT_ID(pdev); (func) < (CHIP_IS_E1x(pdev) ? E1H_FUNC_MAX : E2_FUNC_MAX); (func)+= (CHIP_IS_E1x(pdev) ? 2 : 1))
1016     u8_t path_id;
1017     #define PATH_ID(pdev)        (PFDEV(pdev)->params.path_id)
1018 
1019     #define SHMEM_BASE(pdev) (pdev->hw_info.shmem_base)
1020 
1021     u8_t vnics_per_port;   //1, 2 or 4
1022     u8_t multi_vnics_mode; //flag for multi function mode (can be set even if vnics_per_port==1)
1023     u8_t path_has_ovlan;   // The multi function mode in the path (can be different than the mutli-function-mode of the function (4-port MF / SF mode E3 only)
1024     u8_t pfunc_mb_id;      // this is for shmem mail box id and currently doesn't support flows which are not mcp send/recv command
1025     u8_t _pad;
1026 
1027     #define IS_MULTI_VNIC(pdev)       (PFDEV(pdev)->params.multi_vnics_mode)
1028     #define VNICS_PER_PORT(pdev)      (PFDEV(pdev)->params.vnics_per_port)
1029     #define VNICS_PER_PATH(pdev)      (PFDEV(pdev)->params.vnics_per_port * ((LM_CHIP_PORT_MODE_4 == CHIP_PORT_MODE(pdev))? 2 : 1 ))
1030 
1031     u16_t ovlan;  //vnic outer vlan
1032     u16_t sd_vlan_eth_type;
1033 
1034     /** 32-bit aligned **/
1035     // min max bw
1036     u8_t min_bw[MAX_VNIC_NUM];
1037     u8_t max_bw[MAX_VNIC_NUM];
1038 
1039     /* 32 bit aligned. */
1040 
1041     /* Status-Block-Related. Status blocks */
1042     u8_t sb_cnt;  //number of vnic's non-default status blocks (16, 8 or 4)
1043     #define LM_SB_CNT(pdev)  ((pdev)->params.sb_cnt)
1044 #ifdef _VBD_
1045     #define LM_NON_RSS_SB(pdev) (LM_SB_CNT(pdev) - 1)
1046 #else
1047     #define LM_NON_RSS_SB(pdev) (LM_MAX_RSS_CHAINS(pdev) - 1)
1048 #endif
1049     #define LM_NON_RSS_CHAIN(pdev) (LM_MAX_RSS_CHAINS(pdev) - 1)
1050     #define LM_OOO_SB(pdev)     (LM_NON_RSS_SB(pdev))
1051 
1052     #define LM_SB_ID_VALID(pdev, sb_id) ((sb_id) < LM_SB_CNT(pdev))
1053     #define LM_FOREACH_SB_ID(pdev, sb_id)  \
1054         for ((sb_id) = 0; (sb_id) < LM_SB_CNT(pdev); (sb_id)++)
1055     /*
1056     #define LM_REST_OF_SB_ID(pdev, sb_id)  \
1057         for ((sb_id) = LM_SB_CNT(pdev); (sb_id) < MAX_RSS_CHAINS / pdev->params.vnics_per_port; (sb_id)++)
1058     */
1059     u8_t max_pf_sb_cnt;
1060     u8_t fw_sb_cnt;
1061 
1062     u8_t fw_base_qzone_cnt;
1063     u8_t fw_qzone_id[PXP_REG_HST_ZONE_PERMISSION_TABLE_SIZE]; /* Which qzone-id in the qzone-table is used for updating producers + dhc counters
1064                             * relevant from E2. For qzone_id from base area offset in permission table is guaranted */
1065     u8_t fw_aux_qzone_cnt;
1066     u8_t aux_fw_qzone_id;  /* Which qzone-id in the qzone-table is used for updating producers + dhc counters
1067                             * relevant from E2*/
1068 
1069     u8_t max_pf_fw_client_cnt;
1070     u8_t fw_client_cnt;
1071     u8_t base_fw_client_id;
1072     u8_t base_fw_ndsb;
1073 
1074     u8_t base_fw_stats_id; /* Where to collect statistics to */
1075 
1076     u8_t base_cam_offset; /* Relevant only for VFs (FIXME: revisit... ) */
1077 
1078     u8_t vf_num_in_pf;
1079     u8_t vf_num_in_path;
1080     u8_t _cnt_pad[2];
1081     #define REL_VFID(_pdev) ((_pdev)->params.vf_num_in_pf)
1082     #define ABS_VFID(_pdev) ((_pdev)->params.vf_num_in_path)
1083     #define FW_VFID(_pdev) (8 + ABS_VFID((_pdev)))
1084     /* 32 bit aligned. */
1085     u32_t debug_me_register;
1086 
1087     /* cam/mac parameters (see lm_init_cam_params) */
1088     u16_t base_offset_in_cam_table;
1089     #define BASE_OFFSET_IN_CAM_TABLE(_pdev) (_pdev)->params.base_offset_in_cam_table
1090 
1091     u16_t cam_size;
1092     #define LM_CAM_SIZE(pdev)                           ((pdev)->params.cam_size)
1093 
1094     u16_t mc_table_size[LM_CLI_IDX_MAX];
1095     #define LM_MC_TABLE_SIZE(pdev,lm_client_idx)        ((pdev)->params.mc_table_size[lm_client_idx])
1096 
1097     u16_t uc_table_size[LM_CLI_IDX_MAX];
1098     #define LM_UC_TABLE_SIZE(pdev,lm_client_idx)        ((pdev)->params.uc_table_size[lm_client_idx])
1099 
1100     #define LM_MC_NDIS_TABLE_SIZE    (64)
1101     #define LM_MC_FCOE_TABLE_SIZE    (2)
1102 
1103     #define LM_MAX_MC_TABLE_SIZE     (LM_MC_NDIS_TABLE_SIZE + LM_MC_FCOE_TABLE_SIZE)
1104     #define LM_KEEP_CURRENT_CAM_VALUE (0xFFFF)
1105     #define LM_INVALID_CAM_BASE_IDX                 (0xFF)
1106 
1107     u8_t rss_caps;              /* rss hash calculation types supported */
1108     #define LM_RSS_CAP_IPV4     1
1109     #define LM_RSS_CAP_IPV6     2
1110 
1111     u8_t rss_chain_cnt;         /* number of rss chains. lm wise, if rss_chain_cnt==1 then rss is disabled */
1112     u8_t tss_chain_cnt;         /* number of tss chains. should be identical to rss_chain_cnt. */
1113 
1114     /* TODO FIX MAX RSS Chains with new HC SB management*/
1115     u8_t max_rss_chains;
1116     #define LM_MAX_RSS_CHAINS(pdev) (pdev)->params.max_rss_chains
1117 
1118     /** 32-bit aligned *   */
1119     /* for registry */
1120     u32_t override_rss_chain_cnt; /* value for overriding configured rss_chain_cnt */
1121 
1122     #define RSS_ID_TO_SB_ID(_rss_id)                (_rss_id) /* Mapping between rss-id to sb-id */
1123     #define RSS_ID_TO_CID(_rss_id)                  (_rss_id) /* Mapping between rss-id to cid */
1124     #define TSS_ID_TO_CID(_tss_id)                  (_tss_id) /* Mapping between rss-id to cid */
1125     #define CHAIN_TO_RSS_ID(_pdev, _chain)          (lm_mp_get_reg_chain_from_chain(_pdev, _chain))    /* Mapping between rss-id to cid */
1126 
1127     #define LM_CLI_RX_FILTER_MASK(pdev, cid)       (1 << LM_FW_CLI_ID(pdev, cid))
1128 
1129     #define LM_RX_FILTER_ALL_MASK(pdev, ret_val) \
1130     { \
1131         ret_val |= LM_CLI_RX_FILTER_MASK((pdev), NDIS_CID(pdev)); \
1132         ret_val |= LM_CLI_RX_FILTER_MASK((pdev), ISCSI_CID(pdev));\
1133         ret_val |= LM_CLI_RX_FILTER_MASK((pdev), RDMA_CID(pdev)); \
1134         ret_val |= LM_CLI_RX_FILTER_MASK((pdev), FCOE_CID(pdev)); \
1135     }
1136 
1137     #define LM_SW_LEADING_SB_ID                     0
1138     #define LM_SW_LEADING_RSS_CID(pdev)             0
1139 
1140     #define LM_INVALID_ETH_CID              (0xFF)
1141 
1142     u8_t map_client_to_cid[LM_CLI_IDX_MAX];
1143     #define NDIS_CID(_pdev)                         (_pdev)->params.map_client_to_cid[LM_CLI_IDX_NDIS]
1144     #define ISCSI_CID(_pdev)                        (_pdev)->params.map_client_to_cid[LM_CLI_IDX_ISCSI]
1145     #define FCOE_CID(_pdev)                         (_pdev)->params.map_client_to_cid[LM_CLI_IDX_FCOE]
1146     #define RDMA_CID(_pdev)                         (_pdev)->params.map_client_to_cid[LM_CLI_IDX_RDMA]
1147     #define FWD_CID(_pdev)                          (_pdev)->params.map_client_to_cid[LM_CLI_IDX_FWD]
1148     #define OOO_CID(_pdev)                          (_pdev)->params.map_client_to_cid[LM_CLI_IDX_OOO]
1149 
1150     #define LM_CLI_CID(_pdev, lm_cli_idx)           ((_pdev)->params.map_client_to_cid[lm_cli_idx])
1151 
1152     #define LM_CHAIN_IDX_CLI(pdev, cid) ((lm_chain_type_not_cos != lm_mp_get_chain_type(pdev, cid)) ? LM_CLI_IDX_NDIS   :   \
1153                                         ((cid == ISCSI_CID(pdev)       ? LM_CLI_IDX_ISCSI  :   \
1154                                         ((cid == FCOE_CID(pdev)        ? LM_CLI_IDX_FCOE   :   \
1155                                         ((cid == FWD_CID(pdev)         ? LM_CLI_IDX_FWD    :   \
1156                                         ((cid == OOO_CID(pdev)         ? LM_CLI_IDX_OOO    :   \
1157                                         (((cid >= (pdev)->params.max_pf_fw_client_cnt) && (cid < (pdev)->params.fw_client_cnt)) ? LM_CLI_IDX_NDIS : \
1158                                                                          LM_CLI_IDX_MAX))))))))))
1159 
1160 
1161     #define LM_CHAIN_IDX_TRAFFIC_TYPE(pdev, cid)    ((lm_chain_type_not_cos != lm_mp_get_chain_type(pdev, cid)) ? LLFC_TRAFFIC_TYPE_NW   :   \
1162                                                     ((cid == ISCSI_CID(pdev) ? LLFC_TRAFFIC_TYPE_ISCSI  :   \
1163                                                     ((cid == FCOE_CID(pdev)  ? LLFC_TRAFFIC_TYPE_FCOE   :   \
1164                                                     ((cid == FWD_CID(pdev)   ? LLFC_TRAFFIC_TYPE_NW    :   \
1165                                                     ((cid == OOO_CID(pdev)   ? LLFC_TRAFFIC_TYPE_ISCSI  :   \
1166                                                     (((cid >= (pdev)->params.max_pf_fw_client_cnt) && (cid < (pdev)->params.fw_client_cnt)) ? LLFC_TRAFFIC_TYPE_NW : \
1167                                                     MAX_TRAFFIC_TYPE))))))))))
1168 
1169     #define LM_FW_CLI_ID(pdev, cid)  (pdev->params.base_fw_client_id + cid)
1170 
1171     /* A bit about E2 Qzone-IDs: qzone is a new area in internal memory where the FW stores producers + dynamic-host-coalesing (dhc) values.
1172      * It is a separate area than areas the have arrays for clients / status-blocks. Technically, the driver can decide to have separate entries
1173      * for producers + dhc entries (it has to do with permissions in PXP for VFs..., for now there is no reason to do this. And we'll use the same
1174      * id, but note that QZONE_ID is intended for fp ring producers. DHC_QZONE_ID is intended for status-block, and thus the parameter they receive.
1175      */
1176     #define LM_FW_QZONE_ID(pdev, cid)        (pdev->params.fw_qzone_id[cid])
1177     #define LM_FW_AUX_QZONE_ID(pdev, rel_non_rss_cid)        (pdev->params.aux_fw_qzone_id + rel_non_rss_cid)
1178     #define LM_FW_DHC_QZONE_ID(pdev, sb_id)  (pdev->params.fw_qzone_id[sb_id])
1179     #define LM_FW_SB_ID(pdev, sb_id) ((sb_id == DEF_STATUS_BLOCK_INDEX)? DEF_STATUS_BLOCK_INDEX: pdev->params.base_fw_ndsb + sb_id)
1180     #define LM_FW_STATS_ID(pdev,cid)         (pdev->params.base_fw_stats_id + cid)
1181     #define LM_CLIENT_BIT_VECTOR(pdev, lm_cli_idx)  (1 << (LM_FW_CLI_ID(pdev, LM_CLI_CID(pdev, lm_cli_idx))))
1182     #define LM_CID_BIT_VECTOR(pdev, cid)            (1 << (LM_FW_CLI_ID(pdev, cid)))
1183 
1184 
1185     /* 'for loop' macros on rss/tss chains  */
1186     #define LM_FOREACH_RSS_IDX(pdev, rss_idx)  \
1187         for ((rss_idx) = 0; (rss_idx) < (pdev)->params.rss_chain_cnt; (rss_idx)++)
1188     #define LM_FOREACH_TSS_IDX(pdev, tss_idx)  \
1189         for ((tss_idx) = 0; (tss_idx) < (pdev)->params.tss_chain_cnt; (tss_idx)++)
1190     #define LM_FOREACH_RSS_IDX_SKIP_LEADING(pdev, rss_idx)  \
1191         for ((rss_idx) = 1; (u8_t)(rss_idx) < (pdev)->params.rss_chain_cnt; (rss_idx)++)
1192     #define LM_FOREACH_TSS_IDX_SKIP_LEADING(pdev, tss_idx)  \
1193         for ((tss_idx) = 1; (u8_t)(tss_idx) < (pdev)->params.tss_chain_cnt; (tss_idx)++)
1194 
1195 
1196     /* L4 RSS */
1197     u8_t l4_rss_chain_cnt;         /* number of L4 rss chains. lm wise, if rss_chain_cnt==1 then rss is disabled */
1198     u8_t l4_tss_chain_cnt;         /* number of L4 tss chains. */
1199     u8_t l4_rss_base_chain_idx;    /* L4 rss base chain Where do the L4 status block start */
1200     u8_t l4_base_fw_rss_id;        /* L4 rss base chain Where do the L4 status block start */
1201 
1202     #define LM_TOE_BASE_RSS_ID(pdev)            ((pdev)->params.l4_rss_base_chain_idx)   /* that is first L4 SB */
1203     #define LM_TOE_FW_RSS_ID(pdev, rss_id)      ((pdev)->params.l4_base_fw_rss_id + (IS_MULTI_VNIC(pdev) ? (CHIP_IS_E1x(pdev) ? rss_id : 0) : rss_id))    /* that is first L4 SB */
1204     #define LM_TOE_RSS_CHAIN_CNT(pdev)                  ((pdev)->params.l4_rss_chain_cnt)
1205     #define LM_TOE_TSS_CHAIN_CNT(pdev)                  ((pdev)->params.l4_tss_chain_cnt)
1206 
1207 
1208     /* 'for loop' macros on L4 rss/tss chains  */
1209     #define LM_TOE_FOREACH_RSS_IDX(pdev, rss_idx)  \
1210         for ((rss_idx) = (pdev)->params.l4_rss_base_chain_idx; (rss_idx) < (pdev)->params.l4_rss_base_chain_idx + (pdev)->params.l4_rss_chain_cnt; (rss_idx)++)
1211     #define LM_TOE_FOREACH_TSS_IDX(pdev, tss_idx)  \
1212         for ((tss_idx) = (pdev)->params.l4_rss_base_chain_idx; (tss_idx) < (pdev)->params.l4_rss_base_chain_idx + (pdev)->params.l4_tss_chain_cnt; (tss_idx)++)
1213 
1214     /* for multi function mode, when 'rss_base_chain_idx' != 0 */
1215     // In new VBD dsign chain doesn't equal client and
1216     // we must add client offset
1217     //((pdev)->params.base_fw_client_id + (val))
1218     #define LM_CHAIN_TO_FW_CLIENT(_pdev, _chain)   ((_pdev)->params.base_fw_client_id + (_chain))
1219 
1220     // eth configuration.
1221     u32_t keep_vlan_tag;
1222 
1223     u16_t eth_align_enable;
1224 
1225     // TODO: encapsulate in a connection object
1226     u32_t update_comp_cnt;
1227     u32_t update_suspend_cnt;
1228     u32_t update_toe_comp_cnt;
1229 
1230     lm_address_t dmae_copy_scratchpad_phys;
1231 
1232     // congestion managment parameters
1233     u32_t cmng_enable;
1234     u32_t cmng_rate_shaping_enable;
1235     u32_t cmng_fairness_enable;
1236     // safc
1237     u32_t cmng_safc_rate_thresh;
1238     u32_t cmng_activate_safc;
1239     // fairness
1240     u32_t cmng_fair_port0_rate;
1241     u32_t cmng_eth_weight;
1242     u32_t cmng_toe_weight;
1243     u32_t cmng_rdma_weight;
1244     u32_t cmng_iscsi_weight;
1245     // rate shaping
1246     u32_t cmng_eth_rate;
1247     u32_t cmng_toe_rate;
1248     u32_t cmng_rdma_rate;
1249     u32_t cmng_iscsi_rate;
1250     // Demo will be removed later
1251     u32_t cmng_toe_con_number;
1252     u32_t cmng_rdma_con_number;
1253     u32_t cmng_iscsi_con_number;
1254     // iscsi
1255     u32_t l5sc_max_pending_tasks;
1256 
1257     // cls_params
1258     struct elink_params link;
1259 
1260     // fw flow control
1261     u32_t l2_fw_flow_ctrl;
1262     u32_t l4_fw_flow_ctrl;
1263 
1264     // preemphasis rx/tx configuration
1265     u32_t preemphasis_enable;
1266 
1267     u32_t preemphasis_rx_0;
1268     u32_t preemphasis_rx_1;
1269     u32_t preemphasis_rx_2;
1270     u32_t preemphasis_rx_3;
1271 
1272     u32_t preemphasis_tx_0;
1273     u32_t preemphasis_tx_1;
1274     u32_t preemphasis_tx_2;
1275     u32_t preemphasis_tx_3;
1276     u32_t l4_rss_enabled_by_os;
1277     u32_t disable_patent_using;
1278     u32_t l4_grq_filling_threshold_divider;
1279     u32_t l4_free_cid_delay_time;
1280     u32_t l4_enable_rss;
1281     u32_t l4_rss_is_possible;
1282         #define L4_RSS_DISABLED 0       /* shmulikr: l4_enable_rss is more then a flag. The various values represent the possible flavors           */
1283         #define L4_RSS_DYNAMIC  1       /* Full support including support for indirection table update */
1284     u32_t l4_max_rcv_wnd_size;
1285     /* disable PCIe non-FATAL error reporting */
1286     u32_t disable_pcie_nfr;
1287 
1288     u32_t mf_proto_support_flags; /* For multi-function: which protocols are supported */
1289     #define LM_PROTO_SUPPORT_ETHERNET  0x1
1290     #define LM_PROTO_SUPPORT_ISCSI     0x2
1291     #define LM_PROTO_SUPPORT_FCOE      0x4
1292 
1293     /* In release this flag will prevent us from crashing in customer site */
1294     u32_t debug_cap_flags;
1295 #if DBG
1296 #define DEFAULT_DEBUG_CAP_FLAGS_VAL     0xffffffff
1297 #else
1298 #define DEFAULT_DEBUG_CAP_FLAGS_VAL     0x0
1299 #endif
1300 
1301 #define DEBUG_CAP_FLAGS_STATS_FW        0x1
1302 //#define DEBUG_CAP_FLAGS_XXX           0x2
1303 
1304     u32_t l4_limit_isles;
1305 #define L4_LI_NOTIFY                        0x0001
1306 #define L4_LI_MAX_GEN_BUFS_IN_ISLE          0x0002
1307 #define L4_LI_MAX_GEN_BUFS_IN_ARCHIPELAGO   0x0004
1308 
1309     u32_t l4_max_gen_bufs_in_isle;
1310     u32_t l4_max_gen_bufs_in_archipelago;
1311     u32_t l4_valid_gen_bufs_in_archipelago;
1312     u32_t l4_max_gen_buf_cnt;      /* maximum number of generic buffers the system can allocate, duplicated from UM*/
1313 
1314     u32_t l4_isles_pool_size;
1315 
1316     u32_t i2c_interval_sec;
1317     elink_status_t i2c_elink_status[I2C_SECTION_MAX]; // represents last elink res per section
1318 
1319     u8_t  l4_num_of_blocks_per_connection;
1320     // PF_FLR
1321     u8_t  is_flr;
1322     u8_t  __nmb_pad[2];
1323     //LLFC should be moved to vars
1324     dcbx_port_params_t    dcbx_port_params;
1325     u32_t   lm_dcb_dont_break_bad_oid;
1326 
1327     config_lldp_params_t  lldp_config_params;
1328     config_dcbx_params_t  dcbx_config_params;
1329     u32_t try_not_align_page_multiplied_memory;
1330 
1331     u32_t l4_dominance_threshold;   /*for firmware debug.*/
1332     u32_t l4_max_dominance_value;   /* set to 0 to disable dominant connection, set to 20 (default) to enable */
1333 
1334     u32_t l4_data_integrity;
1335     u32_t l4_start_port;
1336     u32_t l4_num_of_ports;
1337     u32_t l4_skip_start_bytes;
1338 
1339     u32_t l4_support_pending_sp_req_complete;
1340     u32_t l4_support_upload_req_on_abortive_disconnect;
1341 
1342     u32_t grc_timeout_max_ignore ;
1343     u32_t tpa_desc_cnt_per_chain;//Number of RSC pages descriptor required per-queue.
1344     u32_t b_dcb_indicate_event;//DCB indicates event towards upper layer.
1345     u32_t sriov_inc_mac;
1346     /* Virtualization related */
1347     u8_t    device_type;
1348     u8_t    virtualization_type;
1349     u8_t    channel_type;
1350     u8_t    pf_acquire_status;
1351 
1352     u8_t fw_stats_init_value;
1353     u8_t int_coalesing_mode_disabled_by_ndis;
1354     u8_t mac_spoof_test;
1355 
1356     u8_t run_driver_pulse;
1357 #define IS_DRIVER_PULSE_ALWAYS_ALIVE(_pdev) (!(_pdev)->params.run_driver_pulse)
1358     u8_t    ___pad;
1359 
1360     /* Error Recovery supported only on E2 and above. Can be controlled via registry */
1361     u32_t enable_error_recovery;
1362 #define IS_ERROR_RECOVERY_ENABLED(_pdev) ((_pdev)->params.enable_error_recovery && !CHIP_IS_E1x(_pdev))
1363     u32_t validate_sq_complete;
1364 
1365     u32_t e3_cos_modes; // enum lm_cos_modes
1366     u32_t e3_network_cos_mode; // enum lm_network_cos_modes
1367 
1368     /* Enables switching between non-enlighted vms under npar configuration.
1369      * vm's that don't have their mac in the tx cam can't be 'switched' between pfs
1370      * this mode actually means that all traffic will be passed on loopback channel if
1371      * there is a pf in promiscuous/accept unmatched (which is set when there are vms)
1372      * this feature hurts performance and therefore can be disabled */
1373     u32_t npar_vm_switching_enable;
1374 
1375     u32_t flow_control_reporting_mode;
1376     #define LM_FLOW_CONTROL_REPORTING_MODE_DISABLED    0
1377     #define LM_FLOW_CONTROL_REPORTING_MODE_ENABLED     1
1378 
1379     u32_t   fw_valid_mask; // 0xeeRRnnMM
1380     u32_t   vf_promiscuous_mode_restricted;
1381     u32_t   max_chains_per_vf_override;
1382     u32_t   record_sp;
1383 #define XSTORM_RECORD_SLOW_PATH 0x01
1384 #define CSTORM_RECORD_SLOW_PATH 0x02
1385 #define TSTORM_RECORD_SLOW_PATH 0x04
1386 #define USTORM_RECORD_SLOW_PATH 0x08
1387     u32_t  start_mp_chain;
1388     u32_t  debug_sriov;
1389     u32_t  debug_sriov_vfs;
1390     u8_t   b_inta_mode_prvided_by_os;
1391 } lm_params_t;
1392 
1393 
1394 
1395 /*******************************************************************************
1396  * Device NVM info -- The native strapping does not support the new parts, the
1397  *                    software needs to reconfigure for them.
1398  ******************************************************************************/
1399 //TODO we need check
1400 typedef struct _flash_spec_t
1401 {
1402     u32_t page_size;
1403     u32_t total_size;
1404 } flash_spec_t;
1405 
1406 //TODO resolve big endian issues
1407 typedef struct _lm_cam_entry_t
1408 {
1409     u8_t cam_addr[ETHERNET_ADDRESS_SIZE];
1410     u16_t ref_cnt;
1411 } lm_cam_entry_t;
1412 
1413 
1414 #define MAX_MAC_OFFSET_IN_NIG 16
1415 
1416 typedef struct _lm_nig_mirror_entry_t
1417 {
1418     s32_t refcnt; //signed to detect underflow.
1419 
1420     //atomic access is not needed because this struct is modified under TOE_LOCK.
1421 #define NIG_ENTRY_INC_REFCNT(_entry) ++(_entry)->refcnt
1422 #define NIG_ENTRY_DEC_REFCNT(_entry) {--(_entry)->refcnt; DbgBreakIf((_entry)->refcnt < 0);}
1423 
1424     u8_t addr[ETHERNET_ADDRESS_SIZE]; //MAC address of this entry.
1425 }lm_nig_mirror_entry_t;
1426 
1427 typedef struct _lm_nig_mirror_t
1428 {
1429     lm_nig_mirror_entry_t entries[MAX_MAC_OFFSET_IN_NIG];
1430 }lm_nig_mirror_t;
1431 
1432 
1433 /*******************************************************************************
1434  * Device info.
1435  ******************************************************************************/
1436 
1437 /* multi function specific */
1438 typedef struct _lm_hardware_mf_info_t
1439 {
1440     u32_t func_mf_cfg;
1441     #define NIV_FUNCTION_ENABLED(_pdev) (GET_FLAGS((_pdev)->hw_info.mf_info.func_mf_cfg, FUNC_MF_CFG_FUNC_DISABLED|FUNC_MF_CFG_FUNC_DELETED)==0)
1442 
1443     u8_t vnics_per_port;  //1, 2 or 4
1444     u8_t multi_vnics_mode;
1445     u8_t path_has_ovlan; /* the multi function mode of the path... */
1446     u8_t _pad;
1447 
1448     u8_t min_bw[MAX_VNIC_NUM];
1449     u8_t max_bw[MAX_VNIC_NUM];
1450 
1451     u16_t ext_id;  //vnic outer vlan or VIF ID
1452     #define VALID_OVLAN(ovlan) ((ovlan) <= 4096)
1453     #define INVALID_VIF_ID 0xFFFF
1454     #define OVLAN(_pdev) ((_pdev)->hw_info.mf_info.ext_id)
1455     #define VIF_ID(_pdev) ((_pdev)->hw_info.mf_info.ext_id)
1456 
1457     u16_t default_vlan;
1458     #define NIV_DEFAULT_VLAN(_pdev) ((_pdev)->hw_info.mf_info.default_vlan)
1459 
1460     u8_t niv_allowed_priorities;
1461     #define NIV_ALLOWED_PRIORITIES(_pdev) ((_pdev)->hw_info.mf_info.niv_allowed_priorities)
1462 
1463     u8_t niv_default_cos;
1464     #define NIV_DEFAULT_COS(_pdev) ((_pdev)->hw_info.mf_info.niv_default_cos)
1465 
1466     u8_t niv_mba_enabled;
1467     u8_t _pad1;
1468 
1469     enum mf_cfg_afex_vlan_mode afex_vlan_mode;
1470     #define AFEX_VLAN_MODE(_pdev) ((_pdev)->hw_info.mf_info.afex_vlan_mode)
1471 
1472     u16_t flags;
1473     #define MF_INFO_VALID_MAC       0x0001
1474 
1475     u8_t mf_mode; /* Switch-dependent / Switch-Independent */
1476     u8_t sd_mode;
1477     #define SD_REGULAR_MODE 0
1478     #define SD_UFP_MODE     1
1479     #define SD_BD_MODE      2
1480 } lm_hardware_mf_info_t;
1481 
1482 
1483 /* IGU related params for status-blocks */
1484 typedef struct _lm_vf_igu_info_t
1485 {
1486     u8_t igu_base_sb; /* base for all ndsb u + c */
1487     u8_t igu_sb_cnt;
1488     u8_t igu_test_sb_cnt;
1489     u8_t igu_test_mode;
1490 } lm_vf_igu_info_t;
1491 
1492 typedef struct _lm_igu_block_t
1493 {
1494     u8_t   status;
1495 #define LM_IGU_STATUS_AVAILABLE 0x01
1496 #define LM_IGU_STATUS_VALID     0x02
1497 #define LM_IGU_STATUS_BUSY      0x04
1498 #define LM_IGU_STATUS_PF        0x08
1499 
1500     u8_t    vector_number;
1501     u8_t    pf_number;
1502     u8_t    vf_number;
1503     u32_t   block_dump;
1504 } lm_igu_block_t;
1505 
1506 typedef struct _lm_igu_map_t
1507 {
1508     lm_igu_block_t igu_blocks_set[IGU_REG_MAPPING_MEMORY_SIZE];
1509 
1510 } lm_igu_map_t;
1511 
1512 typedef struct _lm_igu_info_t {
1513     u8_t igu_base_sb; /* base for all ndsb u + c */
1514     #define IGU_BASE_NDSB(pdev) ((pdev)->hw_info.intr_blk_info.igu_info.igu_base_sb)
1515     #define IGU_PF_NDSB(pdev, sb_id) (IGU_BASE_NDSB(pdev) + sb_id)
1516     u8_t igu_sb_cnt;
1517     #define LM_IGU_SB_CNT(pdev)  ((pdev)->hw_info.intr_blk_info.igu_info.igu_sb_cnt)
1518     u8_t igu_dsb_id;
1519     #define IGU_DSB_ID(pdev) ((pdev)->hw_info.intr_blk_info.igu_info.igu_dsb_id)
1520     u8_t igu_u_sb_offset;
1521     #define IGU_U_NDSB_OFFSET(pdev) ((pdev)->hw_info.intr_blk_info.igu_info.igu_u_sb_offset)
1522     u8_t igu_func_id;
1523     #define IGU_FUNC_ID(pdev) ((pdev)->hw_info.intr_blk_info.igu_info.igu_func_id)
1524     u8_t igu_test_sb_cnt;
1525     lm_vf_igu_info_t    vf_igu_info[E2_MAX_NUM_OF_VFS];
1526     u8_t igu_sb[IGU_REG_MAPPING_MEMORY_SIZE];
1527     #define IGU_VF_NDSB(pdev, sb_id) ((pdev)->hw_info.intr_blk_info.igu_info.igu_sb[sb_id])
1528     lm_igu_map_t    igu_map;
1529     #define IGU_SB(pdev, sb_id) ((pdev)->hw_info.intr_blk_info.igu_info.igu_map.igu_blocks_set[sb_id])
1530 } lm_igu_info_t;
1531 
1532 typedef struct _lm_intr_blk_info_t
1533 {
1534     u8_t blk_type;
1535     #define INTR_BLK_HC  0
1536     #define INTR_BLK_IGU 1
1537     #define INTR_BLK_TYPE(_pdev) ((_pdev)->hw_info.intr_blk_info.blk_type)
1538 
1539     u8_t blk_mode;
1540     #define INTR_BLK_MODE_BC   0
1541     #define INTR_BLK_MODE_NORM 1
1542     #define INTR_BLK_MODE(_pdev) ((_pdev)->hw_info.intr_blk_info.blk_mode)
1543 
1544     u8_t access_type;
1545     #define INTR_BLK_ACCESS_GRC 1
1546     #define INTR_BLK_ACCESS_IGUMEM 0
1547     #define INTR_BLK_ACCESS(_pdev) ((_pdev)->hw_info.intr_blk_info.access_type)
1548 
1549     u32_t simd_addr_wmask;
1550     #define INTR_BLK_SIMD_ADDR_WMASK(_pdev) ((_pdev)->hw_info.intr_blk_info.simd_addr_wmask)
1551 
1552     u32_t simd_addr_womask;
1553     #define INTR_BLK_SIMD_ADDR_WOMASK(_pdev) ((_pdev)->hw_info.intr_blk_info.simd_addr_womask)
1554 
1555     u32_t cmd_ctrl_rd_wmask;
1556     u32_t cmd_ctrl_rd_womask;
1557     #define INTR_BLK_CMD_CTRL_INVALID 0
1558     #define INTR_BLK_REQUIRE_CMD_CTRL(_pdev) ((_pdev)->hw_info.intr_blk_info.cmd_ctrl_rd_wmask != INTR_BLK_CMD_CTRL_INVALID)
1559     #define INTR_BLK_CMD_CTRL_RD_WMASK(_pdev) ((_pdev)->hw_info.intr_blk_info.cmd_ctrl_rd_wmask)
1560     #define INTR_BLK_CMD_CTRL_RD_WOMASK(_pdev) ((_pdev)->hw_info.intr_blk_info.cmd_ctrl_rd_womask)
1561 
1562     /* IGU specific data */
1563     lm_igu_info_t igu_info;
1564 
1565 } lm_intr_blk_info_t;
1566 
1567 #ifdef VF_INVOLVED
1568 #define GET_NUM_VFS_PER_PF(_pdev) ((_pdev)->hw_info.sriov_info.total_vfs)
1569 #define GET_NUM_VFS_PER_PATH(_pdev) (64)
1570 #else
1571 #define GET_NUM_VFS_PER_PF(_pdev) (0)
1572 #define GET_NUM_VFS_PER_PATH(_pdev) (0)
1573 #endif
1574 typedef struct _lm_sriov_info_t {
1575 //    #define MAX_VF_BAR 3 Fix it when emulation supports 3 bars
1576     #define MAX_VF_BAR 2
1577     u16_t sriov_control;
1578     u16_t total_vfs; /* maximum allowed vfs      */
1579     u16_t num_vfs;
1580     u16_t vf_device_id;
1581     u8_t  max_chains_per_vf;
1582     u8_t  vf_cid_wnd_size;
1583     u8_t  vf_pool_size;
1584     u8_t  pf_nd_pool_size;
1585     u32_t first_vf_in_pf;
1586     u32_t vf_bar_size[MAX_VF_BAR];
1587     lm_address_t vf_bars[MAX_VF_BAR];
1588 
1589     u32_t  shmem_num_vfs_in_pf;
1590     u8_t   b_pf_asymetric_configuration;
1591 
1592 } lm_sriov_info_t;
1593 
1594 
1595 typedef enum
1596 {
1597     LM_CHIP_PORT_MODE_NONE = 0x0,
1598     LM_CHIP_PORT_MODE_2    = 0x1,
1599     LM_CHIP_PORT_MODE_4    = 0x2
1600 } lm_chip_port_mode_t ;
1601 
1602 typedef struct _lm_hardware_info_t
1603 {
1604     /* PCI info. */
1605     u16_t vid;
1606     u16_t did;
1607     u16_t ssid;
1608     u16_t svid;
1609 
1610     u8_t irq;
1611     u8_t int_pin;
1612     u8_t latency_timer;
1613     u8_t cache_line_size;
1614     u8_t rev_id;
1615     u8_t _pad[3];
1616 
1617     lm_address_t mem_base[MAX_NUM_BAR];
1618     u32_t bar_size[MAX_NUM_BAR];
1619 
1620     lm_address_t mem_base1;
1621     u32_t bar_size1;
1622 
1623     /* Device info. */
1624     u8_t mac_addr[8];                   /* Hardware MAC address. */
1625     u8_t iscsi_mac_addr[8];             /* Hardware MAC address for iSCSI. */
1626     u8_t fcoe_mac_addr[8];              /* Hardware MAC address for FCoE. */
1627     u8_t fcoe_wwn_port_name[8];         /* Hardware MAC address for FCoE WWPN. */
1628     u8_t fcoe_wwn_node_name[8];         /* Hardware MAC address for FCoE WWNN. */
1629 
1630     u32_t shmem_base;                   /* Firmware share memory   base addr. */
1631     u32_t mf_cfg_base;                  /* MF cfg offset in shmem_base        */
1632     u32_t shmem_base2;                  /* Firmware share memory 2 base addr. */
1633 
1634     u32_t chip_id;                      /* chip num:16-31, rev:12-15, metal:4-11, bond_id:0-3 */
1635     #define CHIP_NUM_SET(_chip_id,_p)   ((_chip_id) = (((_p) & 0xffff) << 16))
1636     #define CHIP_NUM(_p)                (((_p)->hw_info.chip_id) & 0xffff0000)
1637     #define CHIP_NUM_5710               0x164e0000
1638     #define CHIP_NUM_5711               0x164f0000
1639     #define CHIP_NUM_5711E              0x16500000
1640     #define CHIP_NUM_5712               0x16620000
1641     #define CHIP_NUM_5712E              0x16630000
1642     #define CHIP_NUM_5713               0x16510000
1643     #define CHIP_NUM_5713E              0x16520000
1644     #define CHIP_NUM_57800              0x168a0000
1645     #define CHIP_NUM_57840_OBSOLETE     0x168d0000
1646     #define CHIP_NUM_57810              0x168e0000
1647     #define CHIP_NUM_57800_MF           0x16a50000
1648     #define CHIP_NUM_57840_MF_OBSOLETE  0x16ae0000
1649     #define CHIP_NUM_57810_MF           0x16ab0000
1650     #define CHIP_NUM_57811              0x163d0000
1651     #define CHIP_NUM_57811_MF           0x163e0000
1652     #define CHIP_NUM_57811_VF           0x163f0000
1653     #define CHIP_NUM_57840_4_10         0x16a10000
1654     #define CHIP_NUM_57840_2_20         0x16a20000
1655     #define CHIP_NUM_57840_MF           0x16a40000
1656     #define CHIP_NUM_57840_VF           0x16ad0000
1657 
1658 
1659     #define CHIP_IS_E1_PARAM(_chip_num)     ((_chip_num) == CHIP_NUM_5710)
1660     #define CHIP_IS_E1(_p)                  (CHIP_IS_E1_PARAM(CHIP_NUM(_p)))
1661 
1662     #define CHIP_IS_E1H_PARAM(_chip_num)    (((_chip_num) == CHIP_NUM_5711) || ((_chip_num) == CHIP_NUM_5711E))
1663     #define CHIP_IS_E1H(_p)                 (CHIP_IS_E1H_PARAM(CHIP_NUM(_p)))
1664 
1665     #define CHIP_IS_E1x_PARAM(_chip_num)    (CHIP_IS_E1_PARAM(((_chip_num))) || CHIP_IS_E1H_PARAM(((_chip_num))))
1666     #define CHIP_IS_E1x(_p)                 (CHIP_IS_E1x_PARAM(CHIP_NUM(_p)))
1667 
1668     #define CHIP_IS_E2_PARAM(_chip_num)     (((_chip_num) == CHIP_NUM_5712) || ((_chip_num) == CHIP_NUM_5713) || \
1669                                              ((_chip_num) == CHIP_NUM_5712E) || ((_chip_num) == CHIP_NUM_5713E))
1670 
1671     #define CHIP_IS_E2(_p)                  (CHIP_IS_E2_PARAM(CHIP_NUM(_p)))
1672 
1673     #define CHIP_IS_E3_PARAM(_chip_num)     ((_chip_num == CHIP_NUM_57800) || (_chip_num == CHIP_NUM_57810) || \
1674                                              (_chip_num == CHIP_NUM_57840_4_10) || (_chip_num == CHIP_NUM_57840_2_20) || (_chip_num == CHIP_NUM_57800_MF) || \
1675                                              (_chip_num == CHIP_NUM_57810_MF) || (_chip_num == CHIP_NUM_57840_MF) || \
1676                                              (_chip_num == CHIP_NUM_57840_OBSOLETE) || (_chip_num == CHIP_NUM_57840_MF_OBSOLETE) || \
1677                                              (_chip_num == CHIP_NUM_57811) || (_chip_num == CHIP_NUM_57811_MF) || \
1678                                              (_chip_num == CHIP_NUM_57811_VF))
1679 
1680     #define CHIP_IS_E3(_p)                  (CHIP_IS_E3_PARAM(CHIP_NUM(_p)))
1681 
1682     #define CHIP_IS_E2E3(_p)                (CHIP_IS_E2(_p) || (CHIP_IS_E3(_p)))
1683 
1684 
1685     #define CHIP_IS_E2E3A0(_p)              (CHIP_IS_E2(_p) || (CHIP_IS_E3A0(_p)))
1686 
1687     #define CHIP_REV_SHIFT              12
1688     #define CHIP_REV_MASK               (0xF<<CHIP_REV_SHIFT)
1689     #define CHIP_REV(_p)                (((_p)->hw_info.chip_id) & CHIP_REV_MASK)
1690     #define CHIP_REV_Ax                 (0x0<<CHIP_REV_SHIFT)
1691     #define CHIP_REV_Bx                 (0x1<<CHIP_REV_SHIFT)
1692     #define CHIP_REV_Cx                 (0x2<<CHIP_REV_SHIFT)
1693     #define CHIP_REV_SIM_IS_FPGA        (0x1<<CHIP_REV_SHIFT)
1694 
1695     #define CHIP_REV_ASIC_MAX           (0x5<<CHIP_REV_SHIFT)
1696     #define CHIP_REV_IS_SLOW(_p)        (CHIP_REV(_p) > CHIP_REV_ASIC_MAX)
1697     #define CHIP_REV_IS_FPGA(_p)        (CHIP_REV_IS_SLOW(_p) && (CHIP_REV(_p) & CHIP_REV_SIM_IS_FPGA))
1698     #define CHIP_REV_IS_EMUL(_p)        (CHIP_REV_IS_SLOW(_p) && !(CHIP_REV(_p)& CHIP_REV_SIM_IS_FPGA)) //if it's simulated, and not FPGA, it's EMUL.
1699     #define CHIP_REV_IS_ASIC(_p)        (!CHIP_REV_IS_SLOW(_p))
1700     #define CHIP_REV_SIM(_p)            ((0xF - (CHIP_REV(_p)>>CHIP_REV_SHIFT))>>1)<<CHIP_REV_SHIFT //For EMUL: Ax=0xE, Bx=0xC, Cx=0xA. For FPGA: Ax=0xF, Bx=0xD, Cx=0xB.
1701 
1702     #define CHIP_IS_E3B0(_p)            (CHIP_IS_E3(_p)&&( (CHIP_REV(_p) == CHIP_REV_Bx)||(CHIP_REV_SIM(_p) == CHIP_REV_Bx)))
1703 
1704     #define CHIP_IS_E3A0(_p)            (CHIP_IS_E3(_p)&&( (CHIP_REV(_p) == CHIP_REV_Ax)||(CHIP_REV_SIM(_p) == CHIP_REV_Ax)))
1705 
1706     #define CHIP_METAL(_p)              (((_p)->hw_info.chip_id) & 0x00000ff0)
1707     #define CHIP_BONDING(_p)            (((_p)->hw_info.chip_id) & 0x0000000f)
1708 
1709     #define CHIP_ID(_p)                 (((_p)->hw_info.chip_id) & 0xfffffff0)
1710     #define CHIP_ID_5706_A0             0x57060000
1711     #define CHIP_ID_5706_A1             0x57060010
1712     #define CHIP_ID_5706_FPGA           0x5706f000
1713     #define CHIP_ID_5706_IKOS           0x5706e000
1714     #define CHIP_ID_5708_A0             0x57080000
1715     #define CHIP_ID_5708_B0             0x57081000
1716     #define CHIP_ID_5708_FPGA           0x5708f000
1717     #define CHIP_ID_5708_IKOS           0x5708e000
1718     #define CHIP_ID_5710_EMUL           0X164ed000
1719     #define CHIP_ID_5710_A0             0x164e0000
1720     #define CHIP_ID_5710_A1             0x164e0010
1721 
1722     #define IS_CHIP_REV_A0(_p)          (CHIP_ID(_p) == CHIP_ID_5710_A0)
1723     #define IS_CHIP_REV_A1(_p)          (CHIP_ID(_p) == CHIP_ID_5710_A1)
1724 
1725     #define CHIP_BOND_ID(_p)            (((_p)->hw_info.chip_id) & 0xf)
1726 
1727     /* A serdes chip will have the first bit of the bond id set. */
1728     #define CHIP_BOND_ID_SERDES_BIT     0x01
1729 
1730     /* This bit defines if OTP process was done on chip */
1731     #define CHIP_OPT_MISC_DO_BIT       0x02
1732 
1733     u8_t silent_chip_rev;                           /* silent chip rev:
1734                                                                               For 57711 0-A0, 1-A1 2-A2
1735                                                                               For 57710 0-A1  1-A2 */
1736     #define SILENT_CHIP_REV(_p)             ((_p)->hw_info.silent_chip_rev)
1737     #define SILENT_REV_E1_A0                0xFF
1738     #define SILENT_REV_E1_A1                0x00
1739     #define SILENT_REV_E1_A2                0x01
1740 
1741     #define SILENT_REV_E1H_A0               0x00
1742     #define SILENT_REV_E1H_A1               0x01
1743     #define SILENT_REV_E1H_A2               0x02
1744 
1745     #define SILENT_REV_E3_B0                0x00
1746     #define SILENT_REV_E3_B1                0x01
1747 
1748     /* In E2, the chip can be configured in 2-port mode  (i.e. 1 port per path) or 4-port mode (i.e. 2 port per path)
1749      * the driver needs this information since it needs to configure several blocks accordingly */
1750     lm_chip_port_mode_t chip_port_mode;
1751     #define CHIP_PORT_MODE(_p)              ((_p)->hw_info.chip_port_mode)
1752 
1753     /* HW config from nvram. */
1754     u32_t nvm_hw_config;
1755     u32_t nvm_hw_config2;
1756 
1757     /* board sn*/
1758     u8_t  board_num[16];
1759 
1760     /* Flash info. */
1761     flash_spec_t flash_spec;
1762 
1763     /* Needed for pxp config should be done by the MCP*/
1764     u8_t max_payload_size;
1765     u8_t max_read_req_size;
1766 
1767     u8_t mcp_detected;
1768 
1769     // external phy fw version
1770     u8_t sz_ext_phy_fw_ver[16];// NULL terminated string populated only after a call to get ext phy fw version
1771 
1772     // link config
1773     u32_t link_config[ELINK_LINK_CONFIG_SIZE];
1774 
1775     // initial dual phy priority config
1776     u32_t multi_phy_config;
1777 
1778     u32_t phy_force_kr_enabler; // read from shmem
1779 
1780     u8_t  no_10g_kr; // TRUE if the KR enforcer is active on this session
1781 
1782     // pcie info
1783     u8_t pcie_lane_width;
1784     #define PCIE_WIDTH_1                1
1785     #define PCIE_WIDTH_2                2
1786     #define PCIE_WIDTH_4                4
1787     #define PCIE_WIDTH_8                8
1788     #define PCIE_WIDTH_16               16
1789     #define PCIE_WIDTH_32               32
1790 
1791     u8_t pcie_lane_speed;
1792     #define PCIE_LANE_SPEED_2_5G        1
1793     #define PCIE_LANE_SPEED_5G          2
1794     #define PCIE_LANE_SPEED_8G          3
1795 
1796     // In E2 chip rev A0 the PCI LANE speed are different (ERR 8)
1797     #define PCIE_LANE_SPEED_2_5G_E2_A0  0
1798     #define PCIE_LANE_SPEED_5G_E2_A0    1
1799 
1800     // We need to save PF0's MPS before going to D3 and restore it when
1801     // returning to D0 to compensate for a Windows bug. See CQ57271.
1802     u32_t saved_pf0_pcie_mps;
1803     #define INVALID_MPS 0xEEEEEEEE //this will never be a valid value since MPS occupies only bits 5-7.
1804 
1805     // mba features
1806     u8_t mba_features;
1807 
1808     // port_feature_config bits
1809     u32_t port_feature_config;
1810 
1811     // mba vlan enable bits
1812     u32_t mba_vlan_cfg ;
1813 
1814     // TRUE if dcc is active
1815     u8_t is_dcc_active;
1816 
1817     // bc rev
1818     u32_t bc_rev;
1819     // ther driver should not load with bc less then the following
1820     #define BC_REV_SUPPORTED            0x040200 //4.2.0
1821     #define BC_REV_IE_DCB_SUPPORTED     0x070200 //7.2.0
1822     #define BC_REV_IE_SRIOV_SUPPORTED   0x070400 //7.4.0
1823 
1824     #define LM_GET_BC_REV_MAJOR(_p) (_p->hw_info.bc_rev>>8)
1825 
1826     /* HW Licensing of Max #connections for each protocol, takes into account bar-size, licensing is 'per-port' and not 'per functions' */
1827     u32_t max_port_toe_conn;
1828     u32_t max_port_rdma_conn;
1829     u32_t max_port_iscsi_conn;
1830     u32_t max_port_fcoe_conn;
1831     u32_t max_port_conns; /* the maximum number of connections support for this port, used to configure PORT registers */
1832     u32_t max_common_conns; /* the maximum number of connections support for ALL ports, used to configure COMMON registers, only used by PORT-MASTER */
1833 
1834     lm_hardware_mf_info_t mf_info;
1835 
1836     /* Information on interrupt block are we working with - HC or IGU (E1/E1H or E2 and above) */
1837     lm_intr_blk_info_t intr_blk_info;
1838 
1839     lm_sriov_info_t sriov_info;
1840 
1841     u8_t    flr_capable;
1842     u8_t    pci_cfg_trust;
1843 #define PCI_CFG_NOT_TESTED_FOR_TRUST    0x00
1844 #define PCI_CFG_NOT_TRUSTED             0x01
1845 #define PCI_CFG_TRUSTED                 0x02
1846 
1847     u8_t    pda_pm_reset_in_progress;
1848 #define SET_PDA_PM_RESET_IN_PROGRESS(_pdev) ((_pdev)->hw_info.pda_pm_reset_in_progress = TRUE)
1849 #define CLEAR_PDA_PM_RESET_IN_PROGRESS(_pdev) ((_pdev)->hw_info.pda_pm_reset_in_progress = FALSE)
1850 #define IS_PDA_PM_RESET_IN_PROGRESS(_pdev) ((_pdev)->hw_info.pda_pm_reset_in_progress)
1851 
1852     u8_t    ___pad;
1853     u32_t   grc_didvid;
1854     u32_t   pci_cfg_didvid;
1855     u32_t   pcie_caps_offset;
1856     u32_t   pcie_dev_capabilities;
1857 } lm_hardware_info_t;
1858 
1859 
1860 
1861 //this struct encapsulates both the default status block as well as the RSS status blocks.
1862 typedef struct _gen_sp_status_block_t
1863 {
1864     /*physical address of the status block.*/
1865     lm_address_t blk_phy_address;
1866     struct hc_sp_status_block_data sb_data;
1867     volatile struct host_sp_status_block * hc_sp_status_blk;
1868 } gen_sp_status_block_t;
1869 
1870 //this struct encapsulates both the default status block as well as the RSS status blocks.
1871 typedef struct _gen_status_block_t
1872 {
1873     union {
1874         struct hc_status_block_data_e1x    e1x_sb_data;
1875         struct hc_status_block_data_e2     e2_sb_data;
1876         lm_address_t vf_sb_phy_address;
1877     } hc_status_block_data;
1878 
1879     union {
1880         /*pointer to default status block */
1881         volatile struct host_hc_status_block_e1x * e1x_sb;
1882         /*pointer to RSS status block   */
1883         volatile struct host_hc_status_block_e2  * e2_sb;
1884         volatile u16_t * vf_sb;
1885     } host_hc_status_block;
1886 
1887     /*physical address of the status block.*/
1888 } gen_status_block_t;
1889 
1890 //attn group wiring
1891 typedef struct _route_cfg_sig_output
1892 {
1893     #define NUM_ATTN_REGS_E1X 4
1894     #define NUM_ATTN_REGS_E2  5
1895     #define MAX_ATTN_REGS 5
1896 
1897     u32_t attn_sig_dword[MAX_ATTN_REGS];
1898 
1899 } route_cfg_sig_output;
1900 
1901 /* interrupt/host coalesing configuration info */
1902 #define HC_TIMEOUT_RESOLUTION_IN_US     4
1903 typedef struct _lm_int_coalesing_info {
1904     struct dynamic_hc_config    eth_dynamic_hc_cfg;
1905 
1906     u32_t  hc_usec_c_sb[HC_CSTORM_SB_NUM_INDICES];          /* static host coalescing period for cstorm sb indexes */
1907     u32_t  hc_usec_u_sb[HC_USTORM_SB_NUM_INDICES];          /* static host coalescing period for ustorm sb indexes */
1908 } lm_int_coalesing_info;
1909 
1910 /*******************************************************************************
1911  * Device state variables.
1912  ******************************************************************************/
1913 // Driver increase/decrease/set macros for L2/L4
1914 #define LM_COMMON_DRV_STATS_ATOMIC_INC(_pdev, layer_type, field_name) \
1915             mm_atomic_inc(&((_pdev->vars.stats.stats_mirror.stats_drv.drv_##layer_type.field_name)));
1916 #define LM_COMMON_DRV_STATS_ATOMIC_DEC(_pdev, layer_type, field_name) \
1917             mm_atomic_dec(&((_pdev->vars.stats.stats_mirror.stats_drv.drv_##layer_type.field_name)));
1918 #define LM_COMMON_DRV_STATS_INC(_pdev, layer_type, field_name) \
1919             ((_pdev->vars.stats.stats_mirror.stats_drv.drv_##layer_type.field_name)++);
1920 #define LM_COMMON_DRV_STATS_DEC(_pdev, layer_type, field_name) \
1921             ((_pdev->vars.stats.stats_mirror.stats_drv.drv_##layer_type.field_name)--);
1922 
1923 #define LM_COMMON_DRV_STATS_ATOMIC_INC_TOE(_pdev, field_name)  LM_COMMON_DRV_STATS_ATOMIC_INC(_pdev, toe, field_name)
1924 #define LM_COMMON_DRV_STATS_ATOMIC_DEC_TOE(_pdev, field_name)  LM_COMMON_DRV_STATS_ATOMIC_DEC(_pdev, toe, field_name)
1925 
1926 #define LM_COMMON_DRV_STATS_INC_ETH(_pdev, field_name)  LM_COMMON_DRV_STATS_INC(_pdev, eth, field_name)
1927 #define LM_COMMON_DRV_STATS_DEC_ETH(_pdev, field_name)  LM_COMMON_DRV_STATS_DEC(_pdev, eth, field_name)
1928 
1929 /* currently driver ETH stats that use ATOMIC_INC are not required for NDIS or BACS, therefore they are disabled in release version */
1930 #if DBG
1931 
1932 #define LM_COMMON_DRV_STATS_ATOMIC_INC_ETH(_pdev, field_name)  LM_COMMON_DRV_STATS_ATOMIC_INC(_pdev, eth, field_name)
1933 #define LM_COMMON_DRV_STATS_ATOMIC_DEC_ETH(_pdev, field_name)  LM_COMMON_DRV_STATS_ATOMIC_DEC(_pdev, eth, field_name)
1934 #else
1935 #define LM_COMMON_DRV_STATS_ATOMIC_INC_ETH(_pdev, field_name)
1936 #define LM_COMMON_DRV_STATS_ATOMIC_DEC_ETH(_pdev, field_name)
1937 #endif /* DBG */
1938 
1939 /* this is a wrapper structure for a vf to pf message, it contains the message itself,
1940  * we use a void pointer to the actual message to enable compiling the vbd with out the vf/pf interface
1941  */
1942 typedef struct _lm_vf_pf_message_t
1943 {
1944     u32_t           state;
1945     u32_t           message_size;
1946     void *          message_virt_addr;
1947     lm_address_t    message_phys_addr;
1948     void *          bulletin_virt_addr;
1949     lm_address_t    bulletin_phys_addr;
1950     volatile u16 *  done;
1951     void         *  cookie;
1952     u16_t           do_not_arm_trigger;
1953     u16_t           old_version;
1954 #ifdef VF_INVOLVED
1955     union
1956     {
1957         struct pf_vf_msg_hdr    sw_channel_hdr;
1958         struct pfvf_tlv         hw_channel_hdr;
1959     } bad_response;
1960 #endif
1961 }
1962 lm_vf_pf_message_t;
1963 
1964 
1965 ////////////////////// Start DCBX define /////////////////////////////////////////////////////
1966 #define LM_DCBX_IE_IS_ETS_DISABLE(_num_traffic_classes)        (0 == (_num_traffic_classes))
1967 #define LM_DCBX_IE_CLASSIF_ENTRIES_TO_ALOC_SIZE(_entries)      ((_entries) * sizeof(dcb_classif_elem_t))
1968 
1969 // regular + extension
1970 #define LM_DCBX_IE_CHIP_CLASSIF_NUM_ENTRIES_LOCAL       (DCBX_MAX_APP_LOCAL)
1971 #define LM_DCBX_IE_CHIP_CLASSIF_NUM_ENTRIES_REMOTE      (DCBX_MAX_APP_PROTOCOL)
1972 // 2 = 1 for default + 1 for ISCSI
1973 #define LM_DCBX_IE_CLASSIF_NUM_ENTRIES_LOCAL            (LM_DCBX_IE_CHIP_CLASSIF_NUM_ENTRIES_LOCAL + 2)
1974 #define LM_DCBX_IE_CLASSIF_NUM_ENTRIES_REMOTE           (LM_DCBX_IE_CHIP_CLASSIF_NUM_ENTRIES_REMOTE)
1975 
1976 #define LM_DCBX_IE_CLASSIF_TABLE_ALOC_SIZE_LOCAL        (LM_DCBX_IE_CLASSIF_ENTRIES_TO_ALOC_SIZE(LM_DCBX_IE_CLASSIF_NUM_ENTRIES_LOCAL))
1977 #define LM_DCBX_IE_CLASSIF_TABLE_ALOC_SIZE_REMOTE       (LM_DCBX_IE_CLASSIF_ENTRIES_TO_ALOC_SIZE(LM_DCBX_IE_CLASSIF_NUM_ENTRIES_REMOTE))
1978 // For debbuging purpose only This size has no arbitrary.
1979 #define LM_DCBX_IE_CLASSIF_TABLE_ALOC_SIZE_DBG          (LM_DCBX_IE_CLASSIF_ENTRIES_TO_ALOC_SIZE(16))
1980 
1981 #define LM_DCBX_MAX_TRAFFIC_TYPES                       (8)
1982 #define LM_DCBX_ILLEGAL_PRI                             (MAX_PFC_PRIORITIES)
1983 
1984 #define IS_DCB_SUPPORTED_BY_CHIP(_pdev)  (!(CHIP_IS_E1x(_pdev)))
1985 
1986 #define IS_DCB_SUPPORTED(_pdev)  (((_pdev)->params.dcbx_config_params.dcb_enable) && \
1987                                   IS_DCB_SUPPORTED_BY_CHIP(_pdev))
1988 
1989 #define IS_DCB_ENABLED(_pdev)  ((_pdev)->dcbx_info.is_enabled)
1990 
1991 #define LM_DCBX_ADMIN_MIB_OFFSET(_pdev ,_mf_cfg_offfset)    (_mf_cfg_offfset + \
1992                                                              PORT_MAX * sizeof(lldp_params_t) + \
1993                                                              PORT_ID(_pdev) * sizeof(lldp_admin_mib_t))
1994 
1995 
1996 typedef struct _lm_dcbx_stat
1997 {
1998     u64_t pfc_frames_sent;
1999     u64_t pfc_frames_received;
2000 }lm_dcbx_stat;
2001 
2002 typedef enum
2003 {
2004     FUNCTION_DCBX_START_POSTED      = 0,
2005     FUNCTION_DCBX_START_COMPLETED   = 1,
2006     FUNCTION_DCBX_STOP_POSTED       = 2,
2007     FUNCTION_DCBX_STOP_COMPLETED    = 3,
2008 } lm_dcbx_function_state_t;
2009 
2010 typedef enum
2011 {
2012     lm_dcbx_drv_flags_set_bit       = 0,
2013     lm_dcbx_drv_flags_reset_bit     = 1,
2014     lm_dcbx_drv_flags_reset_flags   = 2,
2015 }lm_dcbx_drv_flags_cmd_t;
2016 
2017 typedef enum {
2018     lm_dcbx_ets_config_state_cee,
2019     lm_dcbx_ets_config_state_ieee,
2020 }lm_dcbx_ets_config_state;
2021 
2022 typedef enum {
2023     lm_dcbx_ets_ieee_config_not_valid,
2024     lm_dcbx_ets_ieee_config_en,
2025     lm_dcbx_ets_ieee_config_di,
2026 }lm_dcbx_ie_ets_ieee_config_state;
2027 
2028 typedef struct _lm_dcbx_indicate_event_t
2029 {
2030     // This design supports only one client bounded
2031     u8_t lm_cli_idx;
2032 
2033     u32_t dcb_current_oper_state_bitmap;
2034     #define DCB_STATE_CONFIGURED_BY_OS_QOS                 (1 << 0)
2035     #define DCB_STATE_CONFIGURED_BY_OS_QOS_TO_WILLING      (1 << 1)
2036 
2037     lm_dcbx_ets_config_state ets_config_state;
2038 
2039     u8_t is_ets_ieee_params_os_valid;
2040     dcb_ets_tsa_param_t ets_ieee_params_os;
2041 
2042     // Configuration parameters
2043     lm_dcbx_ie_ets_ieee_config_state ets_ieee_config_state;
2044     dcb_ets_tsa_param_t ets_ieee_params_config;
2045 
2046     // CEE doesn't support CONDITION_TCP_PORT.
2047     // If an ISCSI entry with CONDITION_TCP_PORT will be accepted (and enforced), but kept locally in the driver
2048     // and not passed to MCP. This entry will be used when determining iSCSI priority:
2049     //  If the operational configuration from MCP contains an entry with 'TCP or UDP port' = 3260 use that entry,
2050     //  Else if OS configuration contained an entry with 'TCP port' = 3260 use that entry,
2051     //  Else use the default configuration.
2052     u16_t                       iscsi_tcp_pri;
2053     // Only for debug use
2054     dcb_indicate_event_params_t dcb_params_given_dbg;
2055 
2056     dcb_indicate_event_params_t local_params;
2057     dcb_indicate_event_params_t remote_params;
2058 }lm_dcbx_indicate_event_t;
2059 
2060 typedef struct _lm_dcbx_info_t
2061 {
2062     dcbx_update_task_state dcbx_update_lpme_task_state;
2063     // The dcbx ramrod state
2064     volatile u32_t dcbx_ramrod_state;
2065     // Flow control configuration
2066     void            *pfc_fw_cfg_virt;
2067     lm_address_t    pfc_fw_cfg_phys;
2068 
2069     u32_t dcbx_error;
2070     #define DCBX_ERROR_NO_ERROR             (0)
2071     #define DCBX_ERROR_MCP_CMD_FAILED       (1 << 0)
2072     #define DCBX_ERROR_SET_TIMER            (1 << 1)
2073     #define DCBX_ERROR_REGISTER_LPME        (1 << 2)
2074     #define DCBX_ERROR_WRONG_PORT           (1 << 3)
2075     #define DCBX_ERROR_RESOURCE             (1 << 4)
2076 
2077     // This parameter can only be changed in is_dcbx_neg_received and is a one-shut parameter
2078     u8_t is_dcbx_neg_received;
2079     u8_t is_enabled;
2080     u8_t _pad[2];
2081     lm_dcbx_indicate_event_t indicate_event;
2082 
2083     // saved the original admin MIB
2084     // Should not be used in MF this is only a pach until MCP will know how to return to default
2085     lldp_admin_mib_t admin_mib_org;
2086 
2087     // Indicate event to upper layer.
2088     volatile u32_t is_indicate_event_en;
2089     /*
2090     1.  This array will serve in order to find the correct COS in Fast path in O (1).(Instead of O(num_of_opr_cos))
2091     2.  All entries must always contain a valid COS value that will be between "num_of_opr_cos -1".
2092     3.  This array will be filled in slow path.
2093     4.  Any Array change or access will not require any lock.
2094     */
2095     u8_t pri_to_cos[LM_DCBX_MAX_TRAFFIC_TYPES];
2096 
2097     // For debugging
2098     u32_t lpme_failed_cnt;
2099 
2100     /******************************start Debbuging code not to submit**************************************/
2101     lldp_local_mib_t local_mib_last;
2102     /******************************end Debbuging code not to submit****************************************/
2103 }lm_dcbx_info_t;
2104 
2105 /**
2106  * @description
2107  * Set in a shared port memory place if DCBX completion was
2108  * received. Function is needed for PMF migration in order to
2109  * synchronize the new PMF that DCBX results has ended.
2110  * @param pdev
2111  * @param is_completion_recv
2112  */
2113 void
2114 lm_dcbx_config_drv_flags(
2115     IN          struct _lm_device_t     *pdev,
2116     IN const    lm_dcbx_drv_flags_cmd_t drv_flags_cmd,
2117     IN const    u32_t                   bit_drv_flags);
2118 
2119 ////////////////////// End DCBX define /////////////////////////////////////////////////////
2120 
2121 typedef enum
2122 {
2123     NOT_PMF         = 0,
2124     PMF_ORIGINAL    = 1,
2125     PMF_MIGRATION   = 2,
2126 }pmf_type_t;
2127 
2128 typedef enum
2129 {
2130     MAC_TYPE_NONE = 0,
2131     MAC_TYPE_EMAC = 1,
2132     MAC_TYPE_BMAC = 2,
2133     MAC_TYPE_UMAC = 3,
2134     MAC_TYPE_XMAC = 4,
2135     MAC_TYPE_MAX  = 5
2136 } mac_type_t;
2137 
2138 // this is based on bdrv_if.h "l2_ioc_link_settings_t"
2139 typedef struct _lm_reported_link_params_t
2140 {
2141     lm_status_t       link;
2142     lm_medium_t       medium;
2143     lm_flow_control_t flow_ctrl;
2144     u8_t              cable_is_attached;
2145     u8_t              eee_policy;
2146 
2147 } lm_reported_link_params_t;
2148 
2149 typedef struct _lm_variables_t
2150 {
2151 #if defined(__SunOS)
2152     ddi_acc_handle_t reg_handle[MAX_NUM_BAR]; /* Holds the DMA registration handle */
2153 #endif
2154     volatile void * mapped_bar_addr[MAX_NUM_BAR]; /* Holds the mapped BAR address.*/
2155 
2156     gen_sp_status_block_t gen_sp_status_block;
2157     gen_status_block_t status_blocks_arr[MAX_NDSB]; /* at index 16 the the default status block lies */
2158     // Host Coalescing acknowledge numbers - this is the local copy to compare against the status index of each of the status blocks.
2159     u16_t u_hc_ack[MAX_NDSB]; //local copy of non-default USTORM consumer
2160     u16_t c_hc_ack[MAX_NDSB]; //local copy of non-default CSTORM consumer
2161     u16_t hc_def_ack;            //local copy of SP consumer
2162     u16_t _hc_pad;
2163     u16_t attn_def_ack;          //local copy of attention bits consumer
2164     u16_t attn_state;            //states for all 16 attn lines (per func) 0=ready for assertion 1=ready for deassertion
2165     route_cfg_sig_output attn_groups_output[MAX_DYNAMIC_ATTN_GRPS]; //dynamic attn groups wiring definitions
2166     u32_t attn_sig_af_inv_reg_addr[MAX_ATTN_REGS]; // addresses of the AEU_AFTER_INVERT registers
2167     u8_t  num_attn_sig_regs;
2168     u32_t aeu_mask_attn_func;    //mask the relevant AEU line from config register
2169     lm_status_t link_status;
2170 
2171     lm_int_coalesing_info       int_coal;
2172 
2173     u8_t eth_init_state;        /* deprecated. used only to mark if eth is already init or not. */
2174     #define PORT_STATE_CLOSE   0
2175     #define PORT_STATE_OPEN    1
2176     #define PORT_STATE_CLOSING 2
2177 
2178     lm_medium_t       medium;
2179     lm_flow_control_t flow_control;
2180     lm_eee_policy_t  eee_policy;
2181     u32_t autogreeen; // autogrEEEn status
2182 
2183     // lm statistics
2184     lm_stats_all_t    stats ;
2185 
2186     // TRUE if read/write DMAE operations can be done (DMAE block + PXP initialized)
2187     #define DMAE_READY(pdev) (pdev->vars.b_is_dmae_ready)
2188     u8_t b_is_dmae_ready ;
2189 
2190     // mirrored NIG MAC table - used in MF/SI mode to support VMChimney.
2191     lm_nig_mirror_t nig_mirror;
2192 
2193     //TODO MCP interface ready
2194     u16_t fw_wr_seq;
2195     u8_t  fw_timed_out;
2196     u32_t fw_port_stats_ptr; // pointer to mcp scratch pad for statistics saving (host_func_stats_t)
2197     u32_t fw_func_stats_ptr; // pointer to Managment statistics (host_port_stats_t)
2198 
2199 
2200     /* Serdes autonegotiation fallback.  For a serdes medium,
2201      * if we cannot get link via autonegotiation, we'll force
2202      * the speed to get link. */
2203     //TODO after specs of serdes
2204     mac_type_t mac_type;
2205 
2206     /*Target phy address used with mread and mwrite*/
2207     u8_t phy_addr;
2208 
2209     /* This flag is set if the cable is attached when there
2210      * is no link.  The upper module could check this flag to
2211      * determine if there is a need to wait for link. */
2212     u8_t cable_is_attached;
2213 
2214     /* Write sequence for driver pulse. */
2215     u16_t drv_pulse_wr_seq;
2216 
2217     // the page tables
2218     u32_t searcher_t1_num_pages;
2219     void **searcher_t1_virt_addr_table;
2220     lm_address_t *searcher_t1_phys_addr_table;
2221 
2222     u32_t searcher_t2_num_pages;
2223     void **searcher_t2_virt_addr_table;
2224     lm_address_t *searcher_t2_phys_addr_table;
2225 
2226     u32_t timers_linear_num_pages;
2227     void **timers_linear_virt_addr_table;
2228     lm_address_t *timers_linear_phys_addr_table;
2229 
2230     u32_t qm_queues_num_pages;
2231     void** qm_queues_virt_addr_table;
2232     lm_address_t *qm_queues_phys_addr_table;
2233 
2234     u32_t context_cdu_num_pages;
2235     void **context_cdu_virt_addr_table;
2236     lm_address_t *context_cdu_phys_addr_table;
2237 
2238     u32_t elt_num_pages; // must be less then 16
2239     void * elt_virt_addr_table[NUM_OF_ELT_PAGES];
2240     lm_address_t elt_phys_addr_table[NUM_OF_ELT_PAGES];
2241 
2242     // Zeroed buffer to use in WB zero memory
2243     u32_t zero_buffer[DMAE_MAX_RW_SIZE_STATIC] ;
2244 
2245     u32_t clk_factor ; // clock factor to multiple timeouts in non ASIC (EMUL/FPGA) cases (value is 1 for ASIC)
2246 
2247     u32_t inst_id; //  represents Bus & Device numbers
2248                    //  0x0000ff00 - Bus
2249                    //  0x000000ff - Device
2250 #ifndef INST_ID_TO_BUS_NUM
2251     #define INST_ID_TO_BUS_NUM(_inst_id) (((_inst_id) >> 8)& 0xFF)
2252     #define MAX_PCI_BUS_NUM                  (256)
2253 #endif // INST_ID_TO_BUS_NUM
2254 
2255     /* Emulation/FPAG doorbell full workaround is enabled.
2256      * The only impact on ASIC is an extra "if" command to check chip rev */
2257 #ifndef USER_LINUX
2258     #define EMULATION_DOORBELL_FULL_WORKAROUND
2259 #endif // USER_LINUX
2260 
2261 #if defined(EMULATION_DOORBELL_FULL_WORKAROUND)
2262     u32_t doorbells_cnt;
2263     #define DOORBELL_CHECK_FREQUENCY 500
2264 
2265     #define ALLOWED_DOORBELLS_HIGH_WM 1000
2266     #define ALLOWED_DOORBELLS_LOW_WM 700
2267     u8_t  doorbells_blocked;
2268     u32_t doorbells_high_wm_reached; /* for statistics */
2269 #endif // EMULATION_DOORBELL_FULL_WORKAROUND
2270     u8_t enable_intr; /* When this flag is set process interrupt */
2271     u8_t dbg_intr_in_wrong_state;
2272     u8_t dbg_intr_in_disabled;
2273     u8_t dbg_intr_zero_status;
2274 
2275     // is this device in charge on link support.
2276     pmf_type_t is_pmf;
2277 
2278     #define IS_PMF(_pdev)               (( PMF_ORIGINAL == (_pdev)->vars.is_pmf) || ( PMF_MIGRATION == (_pdev)->vars.is_pmf))
2279     #define IS_PMF_ORIGINAL(_pdev)      ( PMF_ORIGINAL == (_pdev)->vars.is_pmf)
2280     #define IS_PMF_MIGRATION(_pdev)     ( PMF_MIGRATION == (_pdev)->vars.is_pmf)
2281 
2282     // The load-response we received from MCP when loading... need for elink calls and convenient
2283     // for debugging.
2284     lm_loader_response  load_code;
2285 
2286     u8_t                b_in_init_reset_flow;
2287     u8_t                _pad[3];
2288     lm_reported_link_params_t last_reported_link_params;
2289 
2290     // cls_vars
2291     struct elink_vars   link;
2292     u32_t               link_chng_cnt;
2293     #define LM_LINK_CHNG_CNT(pdev) ((pdev)->vars.link_chng_cnt)
2294 
2295     u32_t               shared_l5_mac_client_id;
2296     u64_t               last_recycling_timestamp;
2297 
2298     /* sriov-related */
2299     //u8_t num_vfs_enabled; /* number of vfs that were enabled, need this for disabling them */
2300     u8_t                is_igu_test_mode;
2301     u8_t                is_pf_restricts_lamac;
2302     u8_t                is_pf_rejected_lamac;
2303     u8_t                is_pf_provides_mac;
2304 	u16_t               pf_link_speed;
2305 	u16_t               __pad;
2306     u32_t               vf_pf_channel_lock;
2307     lm_vf_pf_message_t  vf_pf_mess;
2308 
2309     u32_t   pxp_hw_interrupts_cnt;
2310     u32_t   dq_int_status_cnt;
2311     u32_t   dq_int_status_discard_cnt;
2312     u32_t   dq_int_status_vf_val_err_cnt;
2313     u32_t   dq_vf_type_val_err_fid;
2314     u32_t   dq_vf_type_val_err_mcid;
2315     u32_t   cfc_int_status_cnt;
2316 } lm_variables_t;
2317 
2318 typedef struct _eth_tx_prod_t
2319 {
2320     u32_t packets_prod;
2321     u16_t bds_prod;
2322     u16_t reserved;
2323 }eth_tx_prod_t;
2324 
2325 /*******************************************************************************
2326  * global chip info
2327  ******************************************************************************/
2328 
2329 typedef struct _lm_chip_global_t
2330 {
2331     u8_t  flags;
2332 #define LM_CHIP_GLOBAL_FLAG_RESET_IN_PROGRESS 0x1 // The flag indicates whether
2333 
2334 #define LM_CHIP_GLOBAL_FLAG_NIG_RESET_CALLED  0x2 // the flag will be set when lm_reset_path() will do nig reset
2335                                                   // the flag will be reset after grc timeout occured and the cause is NIG access OR after another "no nig" reset
2336 
2337     u32_t cnt_grc_timeout_ignored;
2338     u32_t grc_timeout_val[E1H_FUNC_MAX*2]; // we give each function 2 grc timeouts before we ASSERT...
2339     u8_t  func_en[E1H_FUNC_MAX]; /* Used for WOL: each function needs to mark itself: whether it should be enabled when reseting nig with wol enabled */
2340 } lm_chip_global_t;
2341 
2342 extern lm_chip_global_t g_lm_chip_global[MAX_PCI_BUS_NUM];
2343 
2344 /*******************************************************************************
2345  * bd chain
2346  ******************************************************************************/
2347 
2348 
2349 /*******************************************************************************
2350  * Transmit info.
2351  ******************************************************************************/
2352 
2353 typedef struct _lm_tx_chain_t
2354 {
2355     u32_t idx;
2356 
2357     lm_bd_chain_t bd_chain;
2358 
2359 
2360     eth_tx_prod_t eth_tx_prods;
2361 
2362 
2363     u32_t prod_bseq;
2364     u16_t pkt_idx;
2365     u16_t volatile *hw_con_idx_ptr;
2366 
2367     u16_t coalesce_buf_cnt;
2368     u16_t _reserved;
2369 
2370     /* debug stats */
2371     u32_t coalesce_buf_used;
2372     u32_t lso_split_used;
2373 
2374     lm_hc_sb_info_t hc_sb_info;
2375 
2376     s_list_t active_descq;
2377     s_list_t coalesce_buf_list;
2378 } lm_tx_chain_t;
2379 
2380 
2381 typedef struct _lm_tx_info_t
2382 {
2383     lm_tx_chain_t chain[3*MAX_HW_CHAINS + MAX_NON_RSS_CHAINS];
2384     #define LM_TXQ(_pdev, _idx)             (_pdev)->tx_info.chain[_idx]
2385 
2386     u32_t max_chain_idx;
2387     u32_t catchup_chain_idx;
2388 
2389     u32_t forward_packets;
2390     u32_t lso_forward_packets;
2391 
2392 } lm_tx_info_t;
2393 
2394 /*******************************************************************************
2395  * Receive info.
2396 ******************************************************************************/
2397 typedef struct _lm_rx_chain_common_t
2398 {
2399     u16_t           bd_prod_without_next; // bd prod without next BD taken into account
2400     u32_t           prod_bseq;
2401     u32_t           desc_cnt;
2402     s_list_t        free_descq;
2403 } lm_rx_chain_common_t;
2404 
2405 /*******************************************************/
2406 /*******************************************************************************
2407  * TPA start info.
2408 ******************************************************************************/
2409 #define LM_TPA_MAX_AGGS                 (max(ETH_MAX_AGGREGATION_QUEUES_E1H_E2,ETH_MAX_AGGREGATION_QUEUES_E1))
2410 #define LM_TPA_MAX_AGG_SIZE             (8)
2411 #define LM_TPA_MIN_DESC                 (LM_TPA_MAX_AGGS * LM_TPA_MAX_AGG_SIZE * 2) // TODO_RSC fine tuning Minimum TPA must be 64 for mask_array.
2412 #define LM_TPA_BD_ELEN_SIZE             (sizeof(struct eth_rx_sge))
2413 
2414 #define LM_TPA_PAGE_BITS                (LM_PAGE_BITS)  /* 4K page. */
2415 #define LM_TPA_PAGE_SIZE                (1 << LM_TPA_PAGE_BITS)
2416 
2417 //Ramrod defines
2418 #define LM_TPA_SGE_PAUSE_THR_LOW        (150)
2419 #define LM_TPA_SGE_PAUSE_THR_HIGH       (250)
2420 typedef struct _lm_tpa_cahin_dbg_params
2421 {
2422     u64_t pck_received;
2423     u64_t pck_received_ind;
2424     u64_t pck_ret_from_chip;
2425     u64_t pck_ret_abort_active;
2426     u64_t pck_ret_abort;
2427 }lm_tpa_cahin_dbg_params;
2428 typedef enum
2429 {
2430     lm_tpa_state_disable       = 0,        // VBD changes to the state only under RX lock.
2431                                         // In this state VBD won't accept RSC packet descriptors.
2432     lm_tpa_state_wait_packets  = 1,        // VBD is waiting to receive number of "tpa_info:: tpa_desc_cnt_per_chain
2433                                         // " multiply "RSS queues" RSC l2packet. After first enable.
2434     lm_tpa_state_enable        = 2,        // RSC is enabled.
2435     lm_tpa_state_invalid       = 3,
2436 }lm_tpa_state_t;
2437 
2438 typedef struct _lm_tpa_sge_chain_t
2439 {
2440     lm_bd_chain_t   bd_chain;           // The RSC BD chain.
2441 
2442 #define LM_TPA_CHAIN_BD(_pdev, _idx)                        ((_pdev)->rx_info.rxq_chain[_idx].tpa_chain.sge_chain.bd_chain)
2443 #define LM_TPA_CHAIN_BD_NUM_ELEM(_pdev, _idx)               ((_pdev)->rx_info.rxq_chain[_idx].tpa_chain.sge_chain.size)
2444 #define LM_TPA_CHAIN_BD_MASK(_pdev, _idx)                   (LM_TPA_CHAIN_BD_NUM_ELEM(_pdev,_idx) - 1)
2445 
2446     lm_packet_t**   active_descq_array; // Array of pointers for OOO quick access of packet descriptors.
2447 
2448 #define LM_TPA_ACTIVE_DESCQ_ARRAY_ELEM(_pdev,_idx)                  (LM_TPA_CHAIN_BD_NUM_ELEM(_pdev,_idx))
2449 #define LM_TPA_ACTIVE_ENTRY_BOUNDARIES_VERIFY(_pdev,_idx,_entry)    DbgBreakIf((LM_TPA_ACTIVE_DESCQ_ARRAY_ELEM(_pdev,_idx) <= (_entry)))
2450 #define LM_TPA_BD_ENTRY_TO_ACTIVE_ENTRY(_pdev,_idx,_x)              ((_x) & LM_TPA_CHAIN_BD_MASK(_pdev,_idx))
2451 
2452     u64_t*          mask_array;         // Will have exactly a bit for each entry in the tpa_chain::sge_chain:: active_descq_array.
2453                                         // Each bit represent if the RSC bd is free or used.1 is used. 0 is free.
2454 
2455 /* Number of u64 elements in SGE mask array */
2456 #define LM_TPA_MASK_LEN(_pdev,_idx)                             ((LM_TPA_CHAIN_BD_NUM_ELEM(_pdev,_idx)) / \
2457                                                                  BIT_VEC64_ELEM_SZ)
2458 #define LM_TPA_MASK_MASK(_pdev, _idx)                           (LM_TPA_MASK_LEN(_pdev, _idx) - 1)
2459 #define LM_TPA_MASK_NEXT_ELEM(_pdev, _idx, el)                  (((el) + 1) & LM_TPA_MASK_MASK(_pdev, _idx))
2460 
2461 
2462 #define LM_TPA_BD_ENTRY_TO_MASK_ENTRY(_pdev,_idx,_x)            (LM_TPA_BD_ENTRY_TO_ACTIVE_ENTRY(_pdev,_idx,_x) >> BIT_VEC64_ELEM_SHIFT)
2463 
2464 #define LM_TPA_MASK_SET_ACTIVE_BIT(_pdev,_idx,_active_entry)    LM_TPA_ACTIVE_ENTRY_BOUNDARIES_VERIFY(_pdev,_idx,_active_entry);   \
2465                                                                 BIT_VEC64_SET_BIT((&LM_SGE_TPA_CHAIN(_pdev,_idx))->mask_array,_active_entry)
2466 
2467 #define LM_TPA_MASK_CLEAR_ACTIVE_BIT(_pdev,_idx,_active_entry)  DbgBreakIf(0 == LM_TPA_MASK_TEST_ACTIVE_BIT(_pdev,_idx,_active_entry));   \
2468                                                                 LM_TPA_ACTIVE_ENTRY_BOUNDARIES_VERIFY(_pdev,_idx,_active_entry);   \
2469                                                                 BIT_VEC64_CLEAR_BIT((&LM_SGE_TPA_CHAIN(_pdev,_idx))->mask_array,_active_entry)
2470 
2471 #define LM_TPA_MASK_TEST_ACTIVE_BIT(_pdev,_idx,_active_entry)   (BIT_VEC64_TEST_BIT((&LM_SGE_TPA_CHAIN(_pdev,_idx))->mask_array,_active_entry))
2472 
2473     u16_t           size;               // Limitation: number of SGE must be a multiple of 64 and a power of 2.
2474                                         // This is derived from the implementation that we will check in resolution of 64 for optimization.
2475                                         // sge_chain::size should be larger from tpa_desc_cnt_per_chain
2476 
2477     u32_t           last_max_con;       // The highest SGE consumer.
2478 }lm_tpa_sge_chain_t;
2479 
2480 typedef struct _lm_tpa_start_coales_bd_t
2481 {
2482     lm_packet_t*    packet;             // Represents an open coalescing, and save the first packet descriptor.
2483     u8_t            is_entry_used;      // The entry state for debugging.
2484 }lm_tpa_start_coales_bd_t;
2485 
2486 typedef struct _lm_tpa_chain_t
2487 {
2488     lm_rx_chain_common_t            common;
2489     lm_tpa_start_coales_bd_t        start_coales_bd[LM_TPA_MAX_AGGS]; //Each entry represents an open coalescing,
2490                                                            // and save the first packet descriptor.
2491     // all the state are suppose to be synchronized we keep them per chain and not in TPA info for reason of lock.
2492     // The lock in lw_recv_packets is taken per chain
2493     // The RSC state. The state is initialized to tpa_state_disable.
2494     lm_tpa_state_t                  state;
2495     lm_tpa_sge_chain_t              sge_chain;
2496 
2497     struct tpa_update_ramrod_data*  ramrod_data_virt;
2498     lm_address_t                    ramrod_data_phys;
2499 
2500     // Debug information
2501     lm_tpa_cahin_dbg_params         dbg_params;
2502 }lm_tpa_chain_t;
2503 
2504 typedef struct _lm_tpa_info_t
2505 {
2506     struct tpa_update_ramrod_data* ramrod_data_virt;
2507     lm_address_t ramrod_data_phys;
2508 
2509     volatile void * update_cookie;
2510     volatile u32_t  ramrod_recv_cnt;    // Number of ramrods received.Decrement by using Interlockeddecrement.
2511     volatile u32_t  state;
2512     #define TPA_STATE_NONE          0
2513     #define TPA_STATE_RAMROD_SENT   1
2514 
2515     u8_t            ipvx_enabled_required;
2516     u8_t            ipvx_enabled_current;
2517     #define TPA_IPVX_DISABLED (0)
2518     #define TPA_IPV4_ENABLED  (1<<0)
2519     #define TPA_IPV6_ENABLED  (1<<1)
2520 }lm_tpa_info_t;
2521 
2522 
2523 /*******************************************************************************
2524  * RSC end info.
2525  ******************************************************************************/
2526 typedef enum
2527 {
2528     LM_RXQ_CHAIN_IDX_BD  = 0,
2529     LM_RXQ_CHAIN_IDX_SGE = 1,
2530     LM_RXQ_CHAIN_IDX_MAX = 2,
2531 } lm_rxq_chain_idx_t ;
2532 
2533 
2534 typedef struct _lm_rx_chain_t
2535 {
2536     lm_rx_chain_common_t common;
2537     u32_t           idx;
2538     lm_bd_chain_t   chain_arr[LM_RXQ_CHAIN_IDX_MAX];
2539     lm_tpa_chain_t  tpa_chain;
2540     u32_t           lah_size; // if 0 - only LM_RXQ_CHAIN_IDX_BD chain is valid
2541     u32_t           ret_bytes;
2542     u32_t           ret_bytes_last_fw_update;
2543     u16_t volatile *hw_con_idx_ptr; // TODO - remove - check non NDIS clients
2544 
2545     lm_hc_sb_info_t hc_sb_info;
2546 
2547     s_list_t        active_descq;
2548 } lm_rx_chain_t;
2549 
2550 /*******************************************************************************
2551 * send queue  info.
2552 ******************************************************************************/
2553 
2554 typedef struct _lm_sq_chain_t
2555 {
2556     /* This is a contiguous memory block of params.l2_sq_bd_page_cnt pages
2557      * used for rx completion.  The BD chain is arranged as a circular
2558      * chain where the last BD entry of a page points to the next page,
2559      * and the last BD entry of the last page points to the first. */
2560     struct slow_path_element *sq_chain_virt;
2561     lm_address_t bd_chain_phy;
2562 
2563     u16_t prod_idx;
2564     u16_t con_idx;
2565 
2566     struct slow_path_element *prod_bd;
2567     struct slow_path_element *last_bd;
2568     u16_t bd_left;
2569 
2570 } lm_sq_chain_t;
2571 
2572 
2573 /**
2574  * Event Queue Structure. Used for the main event-queue, and
2575  * also event queues used by iscsi + fcoe
2576  */
2577 typedef struct _lm_eq_chain_t
2578 {
2579     lm_bd_chain_t bd_chain;
2580     u16_t volatile *hw_con_idx_ptr;
2581     u16_t iro_prod_offset; /* The producer offset inside internal RAM */
2582     lm_hc_sb_info_t hc_sb_info;
2583 
2584 } lm_eq_chain_t;
2585 
2586 
2587 /* the rcq chain now holds the real HSI eth_rx_cqe */
2588 typedef struct _lm_rcq_chain_t
2589 {
2590     u32_t idx; //this is the symmetric index of the corresponding Rx
2591 
2592     lm_bd_chain_t bd_chain;
2593 
2594     u32_t prod_bseq;
2595     u16_t volatile *hw_con_idx_ptr;
2596     u16_t iro_prod_offset; /* The producer offset inside internal RAM */
2597 
2598     lm_hc_sb_info_t hc_sb_info;
2599 
2600 } lm_rcq_chain_t;
2601 
2602 typedef struct _lm_rx_info_t
2603 {
2604     lm_rx_chain_t  rxq_chain[MAX_HW_CHAINS + MAX_NON_RSS_CHAINS];
2605     lm_rcq_chain_t rcq_chain[MAX_HW_CHAINS + MAX_NON_RSS_CHAINS];
2606     #define LM_RXQ(_pdev, _idx)                       (_pdev)->rx_info.rxq_chain[_idx]
2607     #define LM_RXQ_COMMON(_pdev, _idx)                ((_pdev)->rx_info.rxq_chain[_idx].common)
2608     #define LM_RXQ_CHAIN(_pdev, _idx, _rxq_chain_idx) (_pdev)->rx_info.rxq_chain[_idx].chain_arr[_rxq_chain_idx]
2609     #define LM_RXQ_CHAIN_BD(_pdev, _idx)              LM_RXQ_CHAIN(_pdev, _idx, LM_RXQ_CHAIN_IDX_BD )
2610     #define LM_RXQ_CHAIN_SGE(_pdev, _idx)             LM_RXQ_CHAIN(_pdev, _idx, LM_RXQ_CHAIN_IDX_SGE )
2611     #define LM_RXQ_IS_CHAIN_SGE_VALID(_pdev, _idx)    (0 != (_pdev)->rx_info.rxq_chain[_idx].lah_size)
2612     #define LM_RXQ_SGE_PTR_IF_VALID(_pdev, _idx)      LM_RXQ_IS_CHAIN_SGE_VALID(_pdev, _idx) ? &LM_RXQ_CHAIN_SGE(_pdev, _idx ) : NULL
2613 
2614     #define LM_RCQ(_pdev, _idx)                       (_pdev)->rx_info.rcq_chain[_idx]
2615 
2616 
2617     #define LM_TPA(_pdev, _idx)                       ((_pdev)->rx_info.rxq_chain[_idx].tpa_chain)
2618     #define LM_TPA_COMMON(_pdev, _idx)                ((_pdev)->rx_info.rxq_chain[_idx].tpa_chain.common)
2619     #define LM_SGE_TPA_CHAIN(_pdev, _idx)             ((_pdev)->rx_info.rxq_chain[_idx].tpa_chain.sge_chain)
2620     lm_tpa_info_t tpa_info;
2621     #define LM_TPA_INFO(_pdev)                        ((_pdev)->rx_info.tpa_info)
2622     struct tstorm_eth_approximate_match_multicast_filtering appr_mc;
2623 
2624 } lm_rx_info_t;
2625 
2626 #define MAX_RAMRODS_OUTSTANDING 2
2627 
2628 typedef struct _lm_request_sp
2629 {
2630     u8_t req_type;
2631     #define REQ_SET_INFORMATION   0x1
2632     #define REQ_QUERY_INFORMATION 0x2
2633 
2634     u32_t ioc;  //IOCTL number of the request
2635     u8_t ok_to_indicate; //should the request be indicated up to NDIS or not
2636     void *clnt_blk; //L2/L4 client block
2637     u8_t ramrod_priority; //ramrod priority (this priority is for the 'common sq' and not for the 'per CID one outstanding' mechnism)
2638     struct sq_pending_command sp_list_command;
2639 } lm_request_sp;
2640 
2641 typedef union _client_init_data_t{
2642     struct client_init_ramrod_data      init_data;
2643     struct tx_queue_init_ramrod_data    tx_queue;
2644 } client_init_data_t;
2645 
2646 typedef struct _lm_client_info_update
2647 {
2648     struct client_update_ramrod_data    *data_virt;
2649     lm_address_t                        data_phys;
2650     volatile u32_t                      state;
2651         #define LM_CLI_UPDATE_NOT_USED      0
2652         #define LM_CLI_UPDATE_USED          1
2653         #define LM_CLI_UPDATE_RECV          2
2654 }lm_client_info_update;
2655 
2656 typedef struct _lm_client_info_t
2657 {
2658     client_init_data_t  * client_init_data_virt;
2659     lm_address_t client_init_data_phys;
2660 
2661     lm_client_info_update update;
2662 
2663     /* Classification objects used in ecore-sp-verbs */
2664     struct ecore_vlan_mac_obj mac_obj;
2665     struct ecore_vlan_mac_obj mac_vlan_obj;
2666     struct ecore_vlan_mac_obj vlan_obj; /* 9/21/11 MichalS :used only for default, but placed here as a preparation for
2667                                          * future enhancement to support per client if needed */
2668     u16_t  current_set_vlan;
2669 
2670     void * volatile set_mac_cookie;
2671     volatile u32_t  sp_mac_state;
2672 
2673     /* RX_MODE related */
2674     void * volatile set_rx_mode_cookie;
2675     volatile unsigned long sp_rxmode_state;
2676 
2677     u32_t  last_set_rx_mask;
2678     u8_t   b_any_vlan_on;
2679     u8_t   b_vlan_only_in_process;
2680 } lm_client_info_t ;
2681 
2682 /*************** SlowPath Queue Information: should be modified under SQ_LOCK ************/
2683 typedef void(*lm_sq_comp_cb_t)(struct _lm_device_t *pdev, struct sq_pending_command *pending);
2684 
2685 typedef enum {
2686     SQ_STATE_NORMAL  = 0,
2687     SQ_STATE_PENDING = 1, /* In this state slowpath will be posted but not to HW.
2688                            * completed by vbd work-item (Error Recovery) */
2689     SQ_STATE_BLOCKED = 2
2690 } lm_sq_state_t;
2691 
2692 typedef struct _lm_sq_info_t
2693 {
2694     lm_sq_chain_t sq_chain;
2695     u8_t num_pending_normal;
2696     u8_t num_pending_high;
2697 
2698     d_list_t pending_normal;
2699     d_list_t pending_high;
2700 
2701     /* This list contains the elements that have been posted to the SQ
2702      * but not completed by FW yet. Maximum list size is MAX_NUM_SPE anyway */
2703     d_list_t pending_complete;
2704 
2705     lm_sq_state_t sq_state;
2706     lm_sq_comp_cb_t sq_comp_cb[MAX_CONNECTION_TYPE];
2707     u8_t sq_comp_scheduled;
2708 
2709 } lm_sq_info_t;
2710 
2711 typedef enum {
2712     FUNCTION_START_POSTED = 0,
2713     FUNCTION_START_COMPLETED = 1,
2714     FUNCTION_STOP_POSTED = 2,
2715     FUNCTION_STOP_COMPLETED = 3
2716 } lm_function_state_t;
2717 
2718 typedef struct _lm_eq_info_t
2719 {
2720     lm_eq_chain_t eq_chain;
2721 
2722     volatile u32_t function_state;
2723 
2724 } lm_eq_info_t;
2725 
2726 /* for now */
2727 //TODO : need to change according to hsi enum
2728 #define MAX_PROTO (FCOE_CONNECTION_TYPE + 1)
2729 #if 0
2730 #define LM_PROTO_NIC    0
2731 #define LM_PROTO_TOE    1
2732 #endif //0
2733 
2734 /*******************************************************************************
2735  * cid resources
2736  ******************************************************************************/
2737 
2738 typedef struct _lm_cid_resc_t
2739 {
2740     lm_sp_req_manager_t sp_req_mgr;
2741     void                *cookies[MAX_PROTO];
2742     u8_t                cid_pending;
2743 #if defined(__SunOS)
2744     ddi_acc_handle_t    reg_handle; /* Holds the DMA registration handle */
2745 #endif
2746     volatile void       *mapped_cid_bar_addr;/* Holds the mapped BAR address.*/
2747 
2748     volatile u32_t       con_state;
2749     #define LM_CON_STATE_CLOSE          0
2750     #define LM_CON_STATE_OPEN_SENT      1
2751     #define LM_CON_STATE_OPEN           2
2752     #define LM_CON_STATE_HALT_SENT      3
2753     #define LM_CON_STATE_HALT           4
2754     #define LM_CON_STATE_TERMINATE      5
2755 
2756 } lm_cid_resc_t;
2757 
2758 struct lm_context_cookie{
2759     lm_cid_resc_t cid_resc;
2760     u32_t next;
2761     u32_t prev; /* for enabling extraction */
2762     u8_t  invalid;
2763     u8_t  ip_type; /* for searcher mirror hash management */
2764     u8_t  cfc_delete_cnt;
2765     u8_t _pad;
2766     u32_t h_val;   /* for searcher mirror hash management */
2767 };
2768 #define LM_MAX_VALID_CFC_DELETIONS  3
2769 
2770 #define LM_CONTEXT_VALID 0
2771 #define LM_CONTEXT_INVALID_WAIT 1
2772 #define LM_CONTEXT_INVALID_DELETE 2
2773 
2774 /* The size of the context is currently 1K... this can change in the future*/
2775 #define LM_CONTEXT_SIZE 1024
2776 
2777 /* structures to support searcher hash table entries */
2778 typedef struct _lm_searcher_hash_entry {
2779     u8_t num_ipv4;
2780     u8_t num_ipv6;
2781     u8_t depth_ipv4;
2782 } lm_searcher_hash_entry_t;
2783 
2784 typedef struct _lm_searcher_hash_info {
2785     #define SEARCHER_KEY_LEN 40
2786     u8_t searcher_key[SEARCHER_KEY_LEN];
2787     u8_t searcher_key_bits[SEARCHER_KEY_LEN*8];
2788 
2789     /* length in bytes of IPV6 "4 tuple" */
2790     #define MAX_SEARCHER_IN_STR 36
2791     u8_t searcher_in_str_bits[MAX_SEARCHER_IN_STR*8];
2792 
2793     lm_searcher_hash_entry_t *searcher_table;
2794     u32_t num_tuples;           /* for debug */
2795     u8_t hash_depth_reached;    /* for debug */
2796     u8_t num_hash_bits;
2797 } lm_searcher_hash_info_t;
2798 
2799 /* per-function context data */
2800 typedef struct _lm_context_info {
2801     struct lm_context_cookie * array;
2802     /* spinlock_t lock; lock was moved to the UM */
2803     u32_t proto_start[MAX_PROTO];
2804     u32_t proto_end[MAX_PROTO];
2805     u32_t proto_ffree[MAX_PROTO];
2806     u32_t proto_pending[MAX_PROTO]; /* list of cids that are pending for cfc-delete */
2807 
2808     /* field added for searcher mirror hash management.
2809      * it is part of the context info because this hash management
2810      * is done as part of cid allocation/de-allocating */
2811     lm_searcher_hash_info_t searcher_hash;
2812 } lm_context_info_t;
2813 
2814 //#endif /* 0 */
2815 
2816 /*******************************************************************************
2817  * Include the l4 header file.
2818  ******************************************************************************/
2819 #include "lm_l4st.h"
2820 #include "lm_l4if.h"
2821 
2822 #include "lm_l5st.h"
2823 #include "lm_l5if.h"
2824 
2825 /* lm device offload info that is common to all offloaded protocols */
2826 typedef struct _lm_offload_info_t
2827 {
2828     struct _lm_device_t *pdev;
2829 
2830     l4_ofld_params_t     l4_params;
2831 
2832     /* Per stack offload state info.  Each index correspond to a stack. */
2833     #define STATE_BLOCK_IDX0                0
2834     #define STATE_BLOCK_TOE                 STATE_BLOCK_IDX0
2835     #define STATE_BLOCK_IDX1                1
2836     #define STATE_BLOCK_IDX2                2
2837     #define STATE_BLOCK_ISCSI               STATE_BLOCK_IDX2
2838     #define STATE_BLOCK_IDX3                3
2839     #define STATE_BLOCK_RDMA                STATE_BLOCK_IDX3
2840     #define STATE_BLOCK_IDX4                4
2841     #define STATE_BLOCK_FCOE                STATE_BLOCK_IDX4
2842     #define STATE_BLOCK_CNT                 5
2843     lm_state_block_t *state_blks[STATE_BLOCK_CNT];
2844 } lm_offload_info_t;
2845 
2846 typedef void(*lm_cid_recycled_cb_t)(struct _lm_device_t *pdev, void *cookie, s32_t cid);
2847 
2848 struct iro {
2849     u32_t base;
2850     u16_t m1;
2851     u16_t m2;
2852     u16_t m3;
2853     u16_t size;
2854 } ;
2855 
2856 /* ecore info. Variables that are accessed from the common init code need using the defines below */
2857 typedef struct _ecore_info_t
2858 {
2859     void         * gunzip_buf;     /* used for unzipping data */
2860     u32_t          gunzip_outlen;
2861     lm_address_t   gunzip_phys;     /* physical address of buffer */
2862     #define FW_BUF_SIZE 0x8000
2863     #define GUNZIP_BUF(_pdev) (_pdev)->ecore_info.gunzip_buf
2864     #define GUNZIP_OUTLEN(_pdev) (_pdev)->ecore_info.gunzip_outlen
2865     #define GUNZIP_PHYS(_pdev) (_pdev)->ecore_info.gunzip_phys
2866     const struct raw_op          *init_ops;
2867     /* Init blocks offsets inside init_ops */
2868     const u16_t                    *init_ops_offsets;
2869     /* Data blob - has 32 bit granularity */
2870     const u32_t                    *init_data;
2871     u32_t                           init_mode_flags;
2872     #define INIT_MODE_FLAGS(_pdev)  (_pdev)->ecore_info.init_mode_flags
2873     /* Zipped PRAM blobs - raw data */
2874     const u8_t               *tsem_int_table_data;
2875     const u8_t               *tsem_pram_data;
2876     const u8_t               *usem_int_table_data;
2877     const u8_t               *usem_pram_data;
2878     const u8_t               *xsem_int_table_data;
2879     const u8_t               *xsem_pram_data;
2880     const u8_t               *csem_int_table_data;
2881     const u8_t               *csem_pram_data;
2882     #define INIT_OPS(_pdev)                 (_pdev)->ecore_info.init_ops
2883     #define INIT_DATA(_pdev)                (_pdev)->ecore_info.init_data
2884     #define INIT_OPS_OFFSETS(_pdev)         (_pdev)->ecore_info.init_ops_offsets
2885     #define INIT_TSEM_PRAM_DATA(_pdev)      (_pdev)->ecore_info.tsem_pram_data
2886     #define INIT_XSEM_PRAM_DATA(_pdev)      (_pdev)->ecore_info.xsem_pram_data
2887     #define INIT_USEM_PRAM_DATA(_pdev)      (_pdev)->ecore_info.usem_pram_data
2888     #define INIT_CSEM_PRAM_DATA(_pdev)      (_pdev)->ecore_info.csem_pram_data
2889     #define INIT_TSEM_INT_TABLE_DATA(_pdev) (_pdev)->ecore_info.tsem_int_table_data
2890     #define INIT_XSEM_INT_TABLE_DATA(_pdev) (_pdev)->ecore_info.xsem_int_table_data
2891     #define INIT_USEM_INT_TABLE_DATA(_pdev) (_pdev)->ecore_info.usem_int_table_data
2892     #define INIT_CSEM_INT_TABLE_DATA(_pdev) (_pdev)->ecore_info.csem_int_table_data
2893     const struct iro              *iro_arr;
2894     #define INIT_IRO_ARRAY(_pdev) (_pdev)->ecore_info.iro_arr
2895     #define IRO (PFDEV(pdev))->ecore_info.iro_arr
2896 
2897 } ecore_info_t;
2898 
2899 typedef struct _flr_stats_t {
2900     u32_t   is_pf;
2901     u32_t   default_wait_interval_ms;
2902     u32_t   cfc_usage_counter;
2903     u32_t   qm_usage_counter;
2904     u32_t   tm_vnic_usage_counter;
2905     u32_t   tm_num_scans_usage_counter;
2906     u32_t   dq_usage_counter;
2907     u32_t   final_cleanup_complete;
2908     u32_t   dmae_cx;
2909     u32_t   pbf_queue[3];
2910     u32_t   pbf_transmit_buffer[3];
2911 } flr_stats_t;
2912 
2913 
2914 typedef struct _lm_slowpath_data_t {
2915     /* Function Start Data  */
2916     struct function_start_data * func_start_data;
2917     lm_address_t func_start_data_phys;
2918 
2919     /* Classification */
2920     union {
2921         struct mac_configuration_cmd        e1x;
2922         struct eth_classify_rules_ramrod_data   e2;
2923     } * mac_rdata[LM_CLI_IDX_MAX];
2924     lm_address_t mac_rdata_phys[LM_CLI_IDX_MAX];
2925 
2926     /* TODO: MAC-VLAN PAIR!!! */
2927 
2928     union {
2929         struct tstorm_eth_mac_filter_config e1x;
2930         struct eth_filter_rules_ramrod_data e2;
2931     } * rx_mode_rdata[LM_CLI_IDX_MAX];
2932     lm_address_t rx_mode_rdata_phys[LM_CLI_IDX_MAX]; // FIXME: multi-client...
2933 
2934     union {
2935         struct mac_configuration_cmd            e1;
2936         struct eth_multicast_rules_ramrod_data  e2;
2937     } * mcast_rdata[LM_CLI_IDX_MAX];
2938     lm_address_t mcast_rdata_phys[LM_CLI_IDX_MAX];
2939 
2940     union {
2941         //struct eth_rss_update_ramrod_data_e1x e1x;
2942         struct eth_rss_update_ramrod_data   e2;
2943     } * rss_rdata;
2944     lm_address_t rss_rdata_phys;
2945 
2946     struct function_update_data* niv_function_update_data;
2947     lm_address_t niv_function_update_data_phys;
2948 
2949     struct function_update_data* l2mp_func_update_data;
2950     lm_address_t l2mp_func_update_data_phys;
2951 
2952     struct function_update_data* encap_function_update_data;
2953     lm_address_t encap_function_update_data_phys;
2954 
2955     struct function_update_data* ufp_function_update_data;
2956     lm_address_t ufp_function_update_data_phys;
2957 
2958 } lm_slowpath_data_t ;
2959 
2960 typedef enum _niv_ramrod_state_t
2961 {
2962     NIV_RAMROD_NOT_POSTED,
2963     NIV_RAMROD_VIF_UPDATE_POSTED,
2964     NIV_RAMROD_VIF_LISTS_POSTED,
2965     NIV_RAMROD_SET_LOOPBACK_POSTED,
2966     NIV_RAMROD_CLEAR_LOOPBACK_POSTED,
2967     NIV_RAMROD_COMPLETED
2968 }niv_ramrod_state_t;
2969 
2970 
2971 typedef enum _ufp_ramrod_state_t
2972 {
2973     UFP_RAMROD_NOT_POSTED,
2974     UFP_RAMROD_PF_LINK_UPDATE_POSTED,
2975     UFP_RAMROD_PF_UPDATE_POSTED,
2976     UFP_RAMROD_COMPLETED
2977 }ufp_ramrod_state_t;
2978 
2979 typedef struct _lm_slowpath_info_t {
2980     lm_slowpath_data_t slowpath_data;
2981 
2982     #define LM_SLOWPATH(pdev, var)      (pdev->slowpath_info.slowpath_data.var)
2983     #define LM_SLOWPATH_PHYS(pdev, var) (pdev->slowpath_info.slowpath_data.var##_phys)
2984 
2985 
2986     /* CAM credit pools */
2987     struct ecore_credit_pool_obj    vlans_pool;
2988     struct ecore_credit_pool_obj    macs_pool;
2989 
2990     /* Rx-Mode Object */
2991     struct ecore_rx_mode_obj rx_mode_obj;
2992 
2993     /* Multi-Cast */
2994     struct ecore_mcast_obj mcast_obj[LM_CLI_IDX_MAX];
2995     volatile void * set_mcast_cookie[LM_CLI_IDX_MAX];
2996     volatile u32_t  sp_mcast_state[LM_CLI_IDX_MAX];
2997 
2998     /* RSS - Only support for NDIS client ! */
2999     struct ecore_rss_config_obj rss_conf_obj;
3000     volatile void * set_rss_cookie;
3001     volatile u32_t  sp_rss_state;
3002 
3003     u32_t  rss_hash_key[RSS_HASH_KEY_SIZE/4];
3004     u32_t  last_set_rss_flags;
3005     u32_t  last_set_rss_result_mask;
3006     u8     last_set_indirection_table[T_ETH_INDIRECTION_TABLE_SIZE];
3007 
3008     // possible values of the echo field
3009     #define FUNC_UPDATE_RAMROD_NO_SOURCE    0
3010     #define FUNC_UPDATE_RAMROD_SOURCE_NIV   1
3011     #define FUNC_UPDATE_RAMROD_SOURCE_L2MP  2
3012     #define FUNC_UPDATE_RAMROD_SOURCE_ENCAP 3
3013     #define FUNC_UPDATE_RAMROD_SOURCE_UFP   4
3014 
3015     volatile u32_t niv_ramrod_state; //use enum niv_ramrod_state_t
3016 
3017     volatile u32_t l2mp_func_update_ramrod_state;
3018     #define L2MP_FUNC_UPDATE_RAMROD_NOT_POSTED 0
3019     #define L2MP_FUNC_UPDATE_RAMROD_POSTED 1
3020     #define L2MP_FUNC_UPDATE_RAMROD_COMPLETED 2
3021 
3022     volatile u8_t last_vif_list_bitmap;
3023     volatile u32_t ufp_func_ramrod_state; //use enum ufp_ramrod_state_t
3024 } lm_slowpath_info_t;
3025 
3026 #define MAX_ER_DEBUG_ENTRIES 10
3027 
3028 typedef struct _lm_er_debug_info_t
3029 {
3030     u32_t attn_sig[MAX_ATTN_REGS];
3031 } lm_er_debug_info_t;
3032 
3033 typedef enum _encap_ofld_state_t
3034 {
3035     ENCAP_OFFLOAD_DISABLED,
3036     ENCAP_OFFLOAD_ENABLED
3037 } encap_ofld_state_t;
3038 
3039 typedef struct _lm_encap_info_t
3040 {
3041     u8_t new_encap_offload_state;
3042     u8_t current_encap_offload_state;
3043 
3044     volatile void * update_cookie;
3045 }lm_encap_info_t;
3046 
3047 typedef struct _lm_debug_info_t
3048 {
3049     u32_t ack_dis[MAX_HW_CHAINS];
3050     u32_t ack_en[MAX_HW_CHAINS];
3051     u32_t ack_def_dis;
3052     u32_t ack_def_en;
3053     u32_t rx_only_int[MAX_HW_CHAINS];
3054     u32_t tx_only_int[MAX_HW_CHAINS];
3055     u32_t both_int[MAX_HW_CHAINS];
3056     u32_t empty_int[MAX_HW_CHAINS];
3057     u32_t false_int[MAX_HW_CHAINS];
3058     u32_t not_porocessed_int[MAX_HW_CHAINS];
3059 
3060     /* Debug information for error recovery. */
3061     /* Data for last MAX_ER_DEBUG_ENTRIES recoveries */
3062     lm_er_debug_info_t  er_debug_info[MAX_ER_DEBUG_ENTRIES];
3063     u8_t                curr_er_debug_idx; /* Index into array above */
3064     u8_t                er_bit_is_set_already;
3065     u8_t                er_bit_from_previous_sessions;
3066     u8_t                _pad;
3067 
3068     /* Some temporary statistics for removed sanity checks */
3069     u32_t   number_of_long_LSO_headers;         /* for LSO processing of packets with headers more than 120 B        */
3070     u32_t   pending_tx_packets_on_fwd; /* There were pending tx packets on forward channel at time of abort
3071                                                  * CQ57879 : evbda!um_abort_tx_packets while running Super Stress with Error Recovery */
3072 
3073     /* OS bugs worked-around in eVBD */
3074     u32_t pf0_mps_overwrite;
3075 
3076     /* TOE Rx/Tx half-complete upon ER */
3077     u32_t   toe_rx_comp_upon_er;
3078     u32_t   toe_tx_comp_upon_er;
3079 
3080     u32_t   toe_prealloc_alloc_fail;
3081 
3082 } lm_debug_info_t;
3083 
3084 /*
3085  * CQ 70040
3086  * Support for NSCI get OS driver version
3087 */
3088 typedef struct _lm_cli_drv_ver_to_shmem_t
3089 {
3090     struct os_drv_ver cli_drv_ver;
3091 }lm_cli_drv_ver_to_shmem_t;
3092 
3093 /*******************************************************************************
3094  * Main device block.
3095  ******************************************************************************/
3096 typedef struct _lm_device_t
3097 {
3098     d_list_entry_t link;        /* Link for the device list. */
3099 
3100     u32_t ver_num;              /* major:8 minor:8 fix:16 */
3101     u8_t  ver_str[16];          /* null terminated version string. */
3102     u32_t ver_num_fw;           /* major:8 minor:8 fix:16 */
3103     u8_t  product_version[4];   /* OEM product version 0xffffffff means invalid/not exists*/
3104 
3105     lm_variables_t     vars;
3106     lm_tx_info_t       tx_info;
3107     lm_rx_info_t       rx_info;
3108     lm_sq_info_t       sq_info;
3109     lm_eq_info_t       eq_info;
3110     lm_client_info_t   client_info[ETH_MAX_RX_CLIENTS_E2];
3111     lm_offload_info_t  ofld_info;
3112     lm_toe_info_t      toe_info;
3113     lm_dcbx_info_t     dcbx_info;
3114     lm_hardware_info_t hw_info;
3115     lm_slowpath_info_t slowpath_info;
3116     lm_dmae_info_t     dmae_info;
3117     lm_params_t        params;
3118     lm_context_info_t* context_info;
3119     //lm_mc_table_t mc_table;
3120     lm_nwuf_list_t     nwuf_list;
3121 
3122     i2c_binary_info_t  i2c_binary_info;
3123 
3124     /* Statistics. */
3125     u32_t chip_reset_cnt;
3126     u32_t fw_timed_out_cnt;
3127 
3128     lm_cid_recycled_cb_t    cid_recycled_callbacks[MAX_PROTO];
3129 
3130     lm_iscsi_info_t iscsi_info;
3131 
3132     lm_fcoe_info_t  fcoe_info;
3133 
3134     ecore_info_t    ecore_info;
3135     struct _lm_device_t*    pf_dev;
3136 #ifdef VF_INVOLVED
3137     pf_resources_set_t      pf_resources;
3138     u8_t                    vf_idx;
3139     u8_t                    _vf_pad[2];
3140 //PF master params
3141     lm_vfs_set_t            vfs_set;
3142 //VF PF Channel params
3143     void *                  pf_vf_acquiring_resp;
3144 #endif
3145     flr_stats_t     flr_stats;
3146 
3147     lm_encap_info_t encap_info;
3148 
3149     lm_debug_info_t debug_info;
3150 
3151     /*
3152      * 08/01/2014
3153      * CQ 70040
3154      * Support for NSCI get OS driver version
3155     */
3156     lm_cli_drv_ver_to_shmem_t lm_cli_drv_ver_to_shmem;
3157 
3158     /* Turned on if a panic occured in the device... (viewed by functions that wait and get a timeout... - do not assert... )
3159      * not turned on yet, prep for the future...
3160      */
3161     u8_t panic;
3162 } lm_device_t;
3163 
3164 
3165 // driver pulse interval calculation
3166 #define DRV_PULSE_PERIOD_MS_FACTOR(_p)  CHIP_REV_IS_ASIC(_p) ? DRV_PULSE_PERIOD_MS : (DRV_PULSE_PERIOD_MS*10)
3167 
3168 // dropless mode definitions
3169 #define BRB_SIZE(_pdev)            (CHIP_IS_E3(_pdev) ? 1024 : 512)
3170 #define MAX_AGG_QS(_pdev)          (CHIP_IS_E1(_pdev) ? \
3171                                         ETH_MAX_AGGREGATION_QUEUES_E1 :\
3172                                         ETH_MAX_AGGREGATION_QUEUES_E1H_E2)
3173 #define FW_DROP_LEVEL(_pdev)       (ETH_MIN_RX_CQES_WITHOUT_TPA + MAX_AGG_QS(_pdev))
3174 #define FW_PREFETCH_CNT         16
3175 #define DROPLESS_FC_HEADROOM    150
3176 
3177 /*******************************************************************************
3178  * Functions exported between file modules.
3179  ******************************************************************************/
3180 /* Prints the entire information of all status blocks
3181  * Parameters:
3182  * pdev   - LM device which holds the status blocks within
3183  */
3184 void print_sb_info(lm_device_t *pdev);
3185 
3186 //__________________________________________________________________________________
3187 
3188 lm_status_t lm_pretend_func( struct _lm_device_t *pdev, u16_t pretend_func_num );
3189 
3190 /* returns a non-default status block according to rss ID
3191  * Parameters:
3192  * pdev   - LM device which holds the status blocks within
3193  * rss_id - RSS ID for which we return the specific status block
3194  */
3195 volatile struct host_status_block * lm_get_status_block(lm_device_t *pdev, u8_t rss_id);
3196 
3197 /* returns the default status block. It is unique per function.
3198  * Parameters:
3199  * pdev   - LM device which holds the status blocks within
3200  */
3201 volatile struct hc_sp_status_block * lm_get_default_status_block(lm_device_t *pdev);
3202 
3203 /* returns the attention status block. It is unique per function.
3204  * Parameters:
3205  * pdev   - LM device which holds the status blocks within
3206  */
3207 volatile struct atten_sp_status_block * lm_get_attention_status_block(lm_device_t *pdev);
3208 
3209 /**
3210  * @Description
3211  *      Prepares for MCP reset: takes care of CLP
3212  *      configurations.
3213  *
3214  * @param pdev
3215  * @param magic_val Old value of 'magic' bit.
3216  */
3217 lm_status_t lm_reset_mcp_prep(lm_device_t *pde, u32_t * magic_val);
3218 lm_status_t lm_reset_mcp_comp(lm_device_t *pdev, u32_t magic_val);
3219 
3220 
3221 /* Initialize the whole status blocks per port - overall: 1 default sb, 16 non-default sbs
3222  *
3223  * Parameters:
3224  * pdev - the LM device which holds the sbs
3225  * port - the port number
3226  */
3227 void init_status_blocks(struct _lm_device_t *pdev);
3228 
3229 void lm_setup_ndsb_index(struct _lm_device_t *pdev, u8_t sb_id, u8_t idx, u8_t sm_idx, u8_t timeout, u8_t dhc_enable);
3230 
3231 /**
3232  * This function sets all the status-block ack values back to
3233  * zero. Must be called BEFORE initializing the igu + before
3234  * initializing status-blocks.
3235  *
3236  * @param pdev
3237  */
3238 void lm_reset_sb_ack_values(struct _lm_device_t *pdev);
3239 
3240 /* set interrupt coalesing parameters.
3241    - these settings are derived from user configured interrupt coalesing mode and tx/rx interrupts rate (lm params).
3242    - these settings are used for status blocks initialization */
3243 void lm_set_int_coal_info(struct _lm_device_t *pdev);
3244 
3245 void lm_int_igu_sb_cleanup(lm_device_t *pdev, u8 igu_sb_id);
3246 
3247 /**
3248  * @description
3249  * Get the HC_INDEX_ETH_TX_CQ_CONS_COSX index from chain.
3250  * @param pdev
3251  * @param chain
3252  *
3253  * @return STATIC u8_t
3254  */
3255 u8_t
3256 lm_eth_tx_hc_cq_cons_cosx_from_chain(IN         lm_device_t *pdev,
3257                                      IN const   u32_t        chain);
3258 
3259 /**
3260  * This function sets all the status-block ack values back to
3261  * zero. Must be called BEFORE initializing the igu + before
3262  * initializing status-blocks.
3263  *
3264  * @param pdev
3265  */
3266 void lm_reset_sb_ack_values(struct _lm_device_t *pdev);
3267 
3268 /* Driver calls this function in order to ACK the default/non-default status block index(consumer) toward the chip.
3269  * This is needed by the hw in order to decide whether an interrupt should be generated by the IGU.
3270  * This is achieved via write into the INT ACK register.
3271  * This function is also controls whether to enable/disable the interrupt line
3272  *
3273  * Parameters:
3274  * rss_id        - the RSS/CPU number we are running on
3275  * pdev          - this is the LM device
3276  */
3277 void lm_int_ack_sb_enable(lm_device_t *pdev, u8_t rss_id);
3278 void lm_int_ack_sb_disable(lm_device_t *pdev, u8_t rss_id);
3279 void lm_int_ack_def_sb_enable(lm_device_t *pdev);
3280 void lm_int_ack_def_sb_disable(lm_device_t *pdev);
3281 
3282 #define USTORM_INTR_FLAG    1
3283 #define CSTORM_INTR_FLAG    2
3284 #define SERV_RX_INTR_FLAG   4
3285 #define SERV_TX_INTR_FLAG   8
3286 
3287 #ifndef USER_LINUX
lm_get_sb_number_indexes(lm_device_t * pdev)3288 static __inline u16_t lm_get_sb_number_indexes(lm_device_t *pdev)
3289 {
3290     if (CHIP_IS_E1x(pdev))
3291     {
3292         return HC_SB_MAX_INDICES_E1X;
3293     }
3294     else
3295     {
3296         return HC_SB_MAX_INDICES_E2;
3297     }
3298 }
3299 
lm_get_sb_running_index(lm_device_t * pdev,u8_t sb_id,u8_t sm_idx)3300 static __inline u16_t lm_get_sb_running_index(lm_device_t *pdev, u8_t sb_id, u8_t sm_idx)
3301 {
3302 #ifdef VF_INVOLVED
3303     if (IS_CHANNEL_VFDEV(pdev)) {
3304         return lm_vf_pf_get_sb_running_index(pdev, sb_id, sm_idx);
3305     }
3306 #endif
3307     if (CHIP_IS_E1x(pdev))
3308     {
3309         return mm_le16_to_cpu(pdev->vars.status_blocks_arr[sb_id].host_hc_status_block.e1x_sb->sb.running_index[sm_idx]);
3310     }
3311     else
3312     {
3313         return mm_le16_to_cpu(pdev->vars.status_blocks_arr[sb_id].host_hc_status_block.e2_sb->sb.running_index[sm_idx]);
3314     }
3315 }
lm_get_sb_index(lm_device_t * pdev,u8_t sb_id,u8_t idx)3316 static __inline u16_t lm_get_sb_index(lm_device_t *pdev, u8_t sb_id, u8_t idx)
3317 {
3318 #ifdef VF_INVOLVED
3319     if (IS_CHANNEL_VFDEV(pdev)) {
3320         return lm_vf_pf_get_sb_index(pdev, sb_id, idx);
3321     }
3322 #endif
3323     if (CHIP_IS_E1x(pdev))
3324     {
3325         return mm_le16_to_cpu(pdev->vars.status_blocks_arr[sb_id].host_hc_status_block.e1x_sb->sb.index_values[idx]);
3326     }
3327     else
3328     {
3329         return mm_le16_to_cpu(pdev->vars.status_blocks_arr[sb_id].host_hc_status_block.e2_sb->sb.index_values[idx]);
3330     }
3331 }
3332 
3333 
lm_get_sb_running_indexes(lm_device_t * pdev,u8_t sb_idx)3334 static __inline  u16_t volatile * lm_get_sb_running_indexes(lm_device_t *pdev, u8_t sb_idx)
3335 {
3336     u16_t volatile * running_indexes_ptr;
3337     if (CHIP_IS_E1x(pdev))
3338     {
3339         running_indexes_ptr = &pdev->vars.status_blocks_arr[sb_idx].host_hc_status_block.e1x_sb->sb.running_index[0];
3340     }
3341     else
3342     {
3343         running_indexes_ptr = &pdev->vars.status_blocks_arr[sb_idx].host_hc_status_block.e2_sb->sb.running_index[0];
3344     }
3345     return running_indexes_ptr;
3346 }
lm_get_sb_indexes(lm_device_t * pdev,u8_t sb_idx)3347 static __inline  u16_t volatile * lm_get_sb_indexes(lm_device_t *pdev, u8_t sb_idx)
3348 {
3349     u16_t volatile * indexes_ptr;
3350 
3351 #ifdef VF_INVOLVED
3352     if (IS_CHANNEL_VFDEV(pdev)) {
3353         return pdev->vars.status_blocks_arr[sb_idx].host_hc_status_block.vf_sb;
3354     }
3355 #endif
3356 
3357     if (CHIP_IS_E1x(pdev))
3358     {
3359         indexes_ptr = &pdev->vars.status_blocks_arr[sb_idx].host_hc_status_block.e1x_sb->sb.index_values[0];
3360     }
3361     else
3362     {
3363         indexes_ptr = &pdev->vars.status_blocks_arr[sb_idx].host_hc_status_block.e2_sb->sb.index_values[0];
3364     }
3365     return indexes_ptr;
3366 }
3367 
3368 
lm_map_igu_sb_id_to_drv_rss(lm_device_t * pdev,u8_t igu_sb_id)3369 static __inline u8_t lm_map_igu_sb_id_to_drv_rss(lm_device_t *pdev, u8_t igu_sb_id)
3370 {
3371     u8_t drv_sb_id = igu_sb_id;
3372     if (INTR_BLK_TYPE(pdev) == INTR_BLK_IGU)
3373     {
3374         if (drv_sb_id >= IGU_U_NDSB_OFFSET(pdev))
3375         {
3376             drv_sb_id -= IGU_U_NDSB_OFFSET(pdev);
3377         }
3378     }
3379     /* FIXME: this doesn't have to be right - drv rss id can differ from sb-id */
3380     return drv_sb_id;
3381 }
lm_query_storm_intr(lm_device_t * pdev,u8_t igu_sb_id,u8_t * drv_sb_id)3382 static __inline u8_t lm_query_storm_intr(lm_device_t *pdev, u8_t igu_sb_id, u8_t * drv_sb_id)
3383 {
3384     u8_t flags = 0;
3385 
3386     *drv_sb_id = igu_sb_id;
3387 
3388     switch(pdev->params.ndsb_type)
3389     {
3390         case LM_SINGLE_SM:
3391         /* One Segment Per u/c */
3392         SET_FLAGS(flags, USTORM_INTR_FLAG);
3393             break;
3394 
3395         case LM_DOUBLE_SM_SINGLE_IGU:
3396         /* One Segment Per u/c */
3397         SET_FLAGS(flags, USTORM_INTR_FLAG);
3398             break;
3399 
3400         default:
3401         {
3402             if (igu_sb_id >= IGU_U_NDSB_OFFSET(pdev))
3403             {
3404             *drv_sb_id -= IGU_U_NDSB_OFFSET(pdev);
3405             SET_FLAGS(flags, USTORM_INTR_FLAG);
3406             }
3407             else
3408             {
3409                 SET_FLAGS(flags, CSTORM_INTR_FLAG);
3410             }
3411         }
3412         break;
3413     }
3414     return flags;
3415 }
3416 
3417 /* Check whether a non-default status block has changed, that is,
3418  * the hw has written a new prod_idx for on or more of its storm parts.
3419  *
3420  * Parameters:
3421  * pdev   - this is the LM device
3422  * sb_idx - this is the index where the status block lies in the array under the lm_device
3423  *
3424  * Return Value:
3425  * result - TRUE in case the specific status block is considered as changed.
3426  *          FALSE otherwise.
3427  *
3428  * Nots:
3429  * For performance optimization, this function is static inline.
3430  */
lm_is_sb_updated(lm_device_t * pdev,u8_t igu_sb_id)3431 static __inline u8_t lm_is_sb_updated(lm_device_t *pdev, u8_t igu_sb_id)
3432 {
3433     u8_t  result     = FALSE;
3434     u16_t hw_sb_idx  = 0;
3435     u8_t  flags      = 0;
3436     u8_t  drv_sb_id  = 0;
3437 
3438     DbgBreakIfFastPath(!pdev);
3439     if (!pdev)
3440     {
3441         return FALSE;
3442     }
3443 
3444     flags = lm_query_storm_intr(pdev, igu_sb_id, &drv_sb_id);
3445 
3446     if (GET_FLAGS(flags, USTORM_INTR_FLAG))
3447     {
3448         hw_sb_idx = lm_get_sb_running_index(pdev, drv_sb_id, SM_RX_ID);
3449         if (hw_sb_idx != pdev->vars.u_hc_ack[drv_sb_id])
3450         {
3451             DbgMessage(pdev, INFORMi, "lm_is_sb_updated():u_sb.status_block_index:%d u_hc_ack:%d\n",
3452                   hw_sb_idx, pdev->vars.u_hc_ack[drv_sb_id]);
3453 
3454             result = TRUE;
3455         }
3456     }
3457 
3458     if (GET_FLAGS(flags, CSTORM_INTR_FLAG))
3459     {
3460         hw_sb_idx = lm_get_sb_running_index(pdev, drv_sb_id, SM_TX_ID);
3461         if (hw_sb_idx != pdev->vars.c_hc_ack[drv_sb_id])
3462         {
3463             DbgMessage(pdev, INFORMi, "lm_is_sb_updated():c_sb.status_block_index:%d c_hc_ack:%d\n",
3464                         hw_sb_idx, pdev->vars.u_hc_ack[drv_sb_id]);
3465 
3466             result = TRUE;
3467         }
3468     }
3469 
3470     DbgMessage(pdev, INFORMi, "lm_is_sb_updated(): result:%s\n", result? "TRUE" : "FALSE");
3471 
3472     return result;
3473 }
3474 #endif // !USER_LINUX
3475 
3476 /* Check if the default statu blocks has changed, that is,
3477  * the hw has written a new prod_idx for on or more of its storm parts.
3478  *
3479  * Parameters:
3480  * pdev   - this is the LM device
3481  *
3482  * Return Value:
3483  * result - TRUE in case the status block is considered as changed.
3484  *          FALSE otherwise.
3485  */
3486 u8_t lm_is_def_sb_updated(lm_device_t *pdev);
3487 
3488 
3489 /* Check if the status block has outstanding completed Rx requests
3490  *
3491  * Parameters:
3492  * pdev   - this is the LM device
3493  * sb_idx - this is the index where the status block lies in the array under the lm_device
3494  *
3495  * Return Value:
3496  * result - TRUE in case the status block has new update regarding Rx completion
3497  *          FALSE otherwise.
3498  */
3499 u8_t lm_is_rx_completion(lm_device_t *pdev, u8_t chain_idx);
3500 
3501 /* Check if the status block has outstanding completed Tx requests
3502  *
3503  * Parameters:
3504  * pdev   - this is the LM device
3505  * sb_idx - this is the index where the status block lies in the array under the lm_device
3506  *
3507  * Return Value:
3508  * result - TRUE in case the status block has new update regarding Tx completion
3509  *          FALSE otherwise.
3510  */
3511 u8_t lm_is_tx_completion(lm_device_t *pdev, u8_t chain_idx);
3512 
3513 /*
3514  * Handle an IGU status-block update.
3515  * Parameters:
3516  * pdev - the LM device
3517  * igu_sb_id - the igu sb id that got the interrupt / MSI-X message
3518  * rx_rss_id / tx_rss_id - matching driver chains
3519  * flags: service_rx / service_tx to know which activity occured
3520  */
3521 u8_t lm_handle_igu_sb_id(lm_device_t *pdev, u8_t igu_sb_id, OUT u8_t *rx_rss_id, OUT u8_t *tx_rss_id);
3522 
3523 lm_status_t lm_update_eth_client(IN struct _lm_device_t    *pdev,
3524                                  IN const u8_t             cid,
3525                                  IN const u16_t            silent_vlan_value,
3526                                  IN const u16_t            silent_vlan_mask,
3527                                  IN const u8_t             silent_vlan_removal_flg,
3528                                  IN const u8_t             silent_vlan_change_flg
3529                                  );
3530 lm_status_t lm_establish_eth_con(struct _lm_device_t *pdev, u8_t const cid, u8_t sb_id, u8_t attributes_bitmap);
3531 lm_status_t lm_establish_forward_con(struct _lm_device_t *pdev);
3532 lm_status_t lm_close_forward_con(struct _lm_device_t *pdev);
3533 lm_status_t lm_close_eth_con(struct _lm_device_t *pdev, u32_t const cid,
3534                              const u8_t   send_halt_ramrod);
3535 lm_status_t lm_terminate_eth_con(struct _lm_device_t *pdev, u32_t const cid);
3536 lm_status_t lm_chip_stop(struct _lm_device_t *pdev);
3537 
3538 int lm_set_init_arrs(lm_device_t *pdev);
3539 
3540 lm_status_t
3541 lm_empty_ramrod_eth(IN struct _lm_device_t *pdev,
3542                     IN const u32_t          cid,
3543                     IN u32_t                data_cid,
3544                     IN volatile u32_t       *curr_state,
3545                     IN u32_t                new_state);
3546 /*
3547  * save client connection parameters for a given L2 client
3548  */
3549 lm_status_t
3550 lm_setup_client_con_params( IN struct _lm_device_t *pdev,
3551                             IN u8_t const          chain_idx,
3552                             IN struct              _lm_client_con_params_t *cli_params );
3553 
3554 lm_status_t
3555 lm_eq_ramrod_post_sync( IN struct _lm_device_t  *pdev,
3556                         IN u8_t                 cmd_id,
3557                         IN u64_t                data,
3558                         IN u8_t                 ramrod_priority,
3559                         IN volatile u32_t       *p_curr_state,
3560                         IN u32_t                curr_state,
3561                         IN u32_t                new_state);
3562 
3563 //L2 Client conn, used for iscsi/rdma
3564 /*
3565  * allocate and setup txq, rxq, rcq and set tstrom ram values for L2 client connection of a given client index
3566  */
3567 lm_status_t
3568 lm_init_chain_con( IN struct _lm_device_t *pdev,
3569                     IN u8_t const          chain_idx,
3570                     IN u8_t const          b_alloc );
3571 
3572 /*
3573  * reset txq, rxq, rcq counters for L2 client connection
3574  */
3575 lm_status_t
3576 lm_clear_eth_con_resc(
3577     IN struct _lm_device_t *pdev,
3578     IN u8_t const           cid
3579     );
3580 
3581 /*
3582  * clear the status block consumer index in the internal ram for a given status block index
3583  */
3584 lm_status_t
3585 lm_clear_chain_sb_cons_idx(
3586     IN struct _lm_device_t *pdev,
3587     IN u8_t sb_idx,
3588     IN struct _lm_hc_sb_info_t *hc_sb_info,
3589     IN volatile u16_t ** hw_con_idx_ptr
3590     );
3591 
3592 
3593 u8_t lm_is_eq_completion(lm_device_t *pdev);
3594 
3595 /* Does relevant processing in case of attn signals assertion.
3596  * 1)Write '1' into attn_ack to chip(IGU) (do this in parallel for _all_ bits including the fixed 8 hard-wired via the
3597  *   set_ack_bit_register
3598  * 2)MASK AEU lines via the mask_attn_func_x register (also in parallel) via GRC - for AEU lower lines 0-7 only!
3599  * 3)Only for the 8 upper fixed hard-wired AEU lines: do their relevant processing, if any.
3600      Finally, drv needs to "clean the attn in the hw block"(e.g. INT_STS_CLR) for them.
3601  *
3602  * Parameters:
3603  * pdev      - this is the LM device
3604  * assertion_proc_flgs - attn lines which got asserted
3605  */
3606 void lm_handle_assertion_processing(lm_device_t *pdev, u16_t assertion_proc_flgs);
3607 
3608 /* Does relevant processing in case of attn signals deassertion.
3609  * 1) Grab split access lock register of MCP (instead of SW arbiter)
3610  * 2) Read 128bit after inverter via the 4*32regs via GRC.
3611  * 3) For each dynamic group (8 lower bits only!), read the masks which were set aside to find for each group which attn bit is a member and
3612  *    needs to be handled. pass all over atten bits belonged to this group and treat them accordingly.
3613  *    After an attn signal was handled, drv needs to "clean the attn in the hw block"(e.g. INT_STS_CLR) for that attn bit.
3614  * 4) Release split access lock register of MCP
3615  * 5) Write '0' into attn_ack to chip(IGU) (do this in parallel for _all_ bits, including the fixed 8 hard-wired, via the set_ack_bit_register)
3616  * 6) UNMASK AEU lines via the mask_attn_func_x register (also in parallel) via GRC - for AEU lower lines 0-7 only!
3617  *
3618  * Parameters:
3619  * pdev      - this is the LM device
3620  * deassertion_proc_flgs - attn lines which got deasserted
3621  */
3622 void lm_handle_deassertion_processing(lm_device_t *pdev, u16_t deassertion_proc_flgs);
3623 
3624 /* Returns the attn_bits and attn_ack fields from the default status block
3625  *
3626  * Parameters:
3627  * pdev      - this is the LM device
3628  * attn_bits - OUT param which receives the attn_bits from the atten part of the def sb
3629  * attn_ack  - OUT param which receives the attn_ack from the atten part of the def sb
3630  */
3631 void lm_get_attn_info(lm_device_t *pdev, u16_t *attn_bits, u16_t *attn_ack);
3632 
3633 /**Genrate a general attention on all functions but this one,
3634  * which causes them to update their link status and CMNG state
3635  * from SHMEM.
3636  *
3637  * @param pdev the LM device
3638  */
3639 void sync_link_status(lm_device_t *pdev);
3640 /**
3641  * @description
3642  * Calculates BW according to current linespeed and MF
3643  * configuration  of the function in Mbps.
3644  * @param pdev
3645  * @param link_speed - Port rate in Mbps.
3646  * @param vnic
3647  *
3648  * @return u16
3649  * Return the max BW of the function in Mbps.
3650  */
3651 u16_t
3652 lm_get_max_bw(IN const lm_device_t  *pdev,
3653               IN const u32_t        link_speed,
3654               IN const u8_t         vnic);
3655 
3656 /**Update CMNG and link info from SHMEM and configure the
3657  * firmware to the right CMNG values if this device is the PMF.
3658  *
3659  * @note This function must be called under PHY_LOCK
3660  *
3661  * @param pdev the LM device
3662  */
3663 void lm_reload_link_and_cmng(lm_device_t *pdev);
3664 
3665 /* Returns the number of toggled bits in a 32 bit integer
3666  * n - integer to count its '1' bits
3667  */
3668 u32_t count_bits(u32_t n);
3669 
3670 u32_t LOG2(u32_t v);
3671 
3672 /**
3673  * General function that waits for a certain state to change,
3674  * not protocol specific. It takes into account vbd-commander
3675  * and reset-is-in-progress
3676  *
3677  * @param pdev
3678  * @param curr_state -> what to poll on
3679  * @param new_state -> what we're waiting for
3680  *
3681  * @return lm_status_t TIMEOUT if state didn't change, SUCCESS
3682  *         otherwise
3683  */
3684 lm_status_t lm_wait_state_change(struct _lm_device_t *pdev, volatile u32_t * curr_state, u32_t new_state);
3685 
3686 /* copy the new values of the status block prod_index for each strom into the local copy we hold in the lm_device
3687  *
3688  * Parameters:
3689  * pdev   - this is the LM device
3690  * sb_idx - this is the index where the status block lies in the array under the lm_device
3691  */
3692 void lm_update_fp_hc_indices(lm_device_t *pdev, u8_t igu_sb_id, u32_t *activity_flg, u8_t *drv_rss_id);
3693 void lm_update_def_hc_indices(lm_device_t *pdev, u8_t sb_id, u32_t *activity_flg);
3694 
3695 void lm_57710A0_dbg_intr( struct _lm_device_t * pdev );
3696 
3697 /* mdio access functions*/
3698 lm_status_t
3699 lm_mwrite(
3700     lm_device_t *pdev,
3701     u32_t reg,
3702     u32_t val);
3703 
3704 lm_status_t
3705 lm_mread(
3706     lm_device_t *pdev,
3707     u32_t reg,
3708     u32_t *ret_val);
3709 
3710 lm_status_t
3711 lm_m45write(
3712     lm_device_t *pdev,
3713     u32_t reg,
3714     u32_t addr,
3715     u32_t val);
3716 
3717 lm_status_t
3718 lm_m45read(
3719     lm_device_t *pdev,
3720     u32_t reg,
3721     u32_t addr,
3722     u32_t *ret_val);
3723 
3724 lm_status_t
3725 lm_phy45_read(
3726     lm_device_t *pdev,
3727     u8_t  phy_addr,
3728     u8_t  dev_addr,
3729     u16_t reg, // offset
3730     u16_t *ret_val);
3731 
3732 lm_status_t
3733 lm_phy45_write(
3734     lm_device_t *pdev,
3735     u8_t  phy_addr,
3736     u8_t dev_addr,
3737     u16_t reg, // offset
3738     u16_t val);
3739 
3740 lm_status_t
3741 lm_set_phy_addr(
3742          lm_device_t *pdev,
3743          u8_t addr);
3744 
3745 void
3746 lm_reset_link(lm_device_t *pdev);
3747 
3748 u32_t
3749 lm_nvram_query(
3750     lm_device_t *pdev,
3751     u8_t reset_flash_block,
3752     u8_t no_hw_mod);
3753 
3754 void
3755 lm_nvram_init(
3756     lm_device_t *pdev,
3757     u8_t reset_flash_block);
3758 
3759 lm_status_t
3760 lm_nvram_read(
3761     lm_device_t *pdev,
3762     u32_t offset,
3763     u32_t *ret_buf,
3764     u32_t buf_size);        /* Must be a multiple of 4. */
3765 
3766 lm_status_t
3767 lm_nvram_write(
3768     lm_device_t *pdev,
3769     u32_t offset,
3770     u32_t *data_buf,
3771     u32_t buf_size);        /* Must be a multiple of 4. */
3772 
3773 void
3774 lm_reg_rd_ind(
3775     lm_device_t *pdev,
3776     u32_t offset,
3777     u32_t *ret);
3778 
3779 void
3780 lm_reg_wr_ind(
3781     lm_device_t *pdev,
3782     u32_t offset,
3783     u32_t val);
3784 
3785 void
3786 lm_reg_rd_ind_imp(
3787     lm_device_t *pdev,
3788     u32_t offset,
3789     u32_t *ret);
3790 
3791 void
3792 lm_reg_wr_ind_imp(
3793     lm_device_t *pdev,
3794     u32_t offset,
3795     u32_t val);
3796 
3797 lm_status_t
3798 lm_init_mac_link(
3799     lm_device_t *pdev);
3800 
3801 //TODO check if we need that when MCP ready
3802 u8_t
3803 fw_reset_sync(
3804     lm_device_t *pdev,
3805     lm_reason_t reason,
3806     u32_t msg_data,
3807     u32_t fw_ack_timeout_us);   /* timeout in microseconds. */
3808 
3809 // mcp interface
3810 lm_status_t
3811 lm_mcp_submit_cmd(
3812     lm_device_t *pdev,
3813     u32_t drv_msg);
3814 
3815 lm_status_t
3816 lm_mcp_get_resp(
3817     lm_device_t *pdev);
3818 
3819 
3820 lm_coalesce_buffer_t *
3821 lm_get_coalesce_buffer(
3822     IN lm_device_t      *pdev,
3823     IN lm_tx_chain_t    *txq,
3824     IN u32_t            buf_size);
3825 
3826 
3827 void
3828 lm_put_coalesce_buffer(
3829     IN lm_device_t          *pdev,
3830     IN lm_tx_chain_t        *txq,
3831     IN lm_coalesce_buffer_t *coalesce_buf);
3832 
3833 void lm_reset_device_if_undi_active(
3834     IN struct _lm_device_t *pdev);
3835 
3836 void
3837 lm_cmng_init(
3838     struct _lm_device_t *pdev,
3839     u32_t port_rate);
3840 
3841 lm_status_t lm_get_pcicfg_mps_mrrs(lm_device_t * pdev);
3842 
3843 void lm_set_pcie_nfe_report( lm_device_t *pdev);
3844 
3845 
3846 void lm_clear_non_def_status_block(struct _lm_device_t *pdev,
3847                               u8_t  sb_id);
3848 
3849 void lm_init_non_def_status_block(struct _lm_device_t *pdev,
3850                               u8_t  sb_id,
3851                               u8_t  port);
3852 
3853 void lm_eth_init_command_comp(struct _lm_device_t *pdev, struct common_ramrod_eth_rx_cqe *cqe);
3854 
3855 u8_t lm_is_nig_reset_called(struct _lm_device_t *pdev);
3856 void lm_clear_nig_reset_called(struct _lm_device_t *pdev);
3857 
3858 void lm_setup_fan_failure_detection(struct _lm_device_t *pdev);
3859 void enable_blocks_attention(struct _lm_device_t *pdev);
3860 u32_t lm_inc_cnt_grc_timeout_ignore(struct _lm_device_t *pdev, u32_t val);
3861 
3862 //acquire split MCP access lock register
3863 lm_status_t acquire_split_alr(lm_device_t *pdev);
3864 //Release split MCP access lock register
3865 void release_split_alr(lm_device_t *pdev);
3866 
3867 /*******************************************************************************
3868  * Description:
3869  *
3870  * Return:
3871  ******************************************************************************/
3872 
3873 #ifdef __BIG_ENDIAN
3874 #define CHANGE_ENDIANITY  TRUE
3875 #else
3876 #define CHANGE_ENDIANITY  FALSE
3877 #endif
3878 
3879 // do not call this macro directly from the code!
3880 #define REG_WR_DMAE_LEN_IMP(_pdev,_reg_offset, _addr_src, _b_src_is_zeroed, _len, le32_swap) lm_dmae_reg_wr(_pdev, \
3881                                                                                                             lm_dmae_get(_pdev, LM_DMAE_DEFAULT)->context, \
3882                                                                                                             (void*)_addr_src, \
3883                                                                                                             _reg_offset,\
3884                                                                                                             (u16_t)_len,\
3885                                                                                              _b_src_is_zeroed,\
3886                                                                                                             le32_swap)
3887 
3888 // do not call this macro directly from the code!
3889 #define REG_RD_DMAE_LEN_IMP(_pdev,_reg_offset, _addr_dst, _len) lm_dmae_reg_rd( _pdev, \
3890                                                                                 lm_dmae_get(_pdev, LM_DMAE_DEFAULT)->context, \
3891                                                                                 _reg_offset, \
3892                                                                                 _addr_dst,\
3893                                                                                 _len,\
3894                                                                                 FALSE)
3895 
3896 // Macro for writing a buffer to destination address using DMAE when data given is in VIRTUAL ADDRESS,
3897 #define VIRT_WR_DMAE_LEN(_pdev, _src_addr, _dst_addr, _len, le32_swap) REG_WR_DMAE_LEN_IMP(_pdev, _dst_addr, _src_addr, FALSE, _len, le32_swap)
3898 
3899 // Macro for writing a buffer to destination address using DMAE when data given is in PHYSICAL ADDRESS,
3900 #define PHYS_WR_DMAE_LEN(_pdev, _src_addr, _dst_addr, _len) lm_dmae_reg_wr_phys( _pdev, \
3901                                                                                 lm_dmae_get(_pdev, LM_DMAE_DEFAULT)->context, \
3902                                                                                 _src_addr, \
3903                                                                                 _dst_addr,\
3904                                                                                 (u16_t)_len)
3905 
3906 // Macro for copying physical buffer using DMAE,
3907 #define PHYS_COPY_DMAE_LEN(_pdev, _src_addr, _dst_addr, _len) lm_dmae_copy_phys_buffer_unsafe(  _pdev,\
3908                                                                                                 lm_dmae_get(_pdev, LM_DMAE_TOE)->context,\
3909                                        _src_addr,\
3910                                        _dst_addr,\
3911                                                                                                 (u16_t)_len)
3912 // write a buffer to destination address using DMAE
3913 #define REG_WR_DMAE_LEN(_pdev,_reg_offset, _addr_src, _len) REG_WR_DMAE_LEN_IMP(_pdev, _reg_offset, _addr_src, FALSE, _len, FALSE)
3914 
3915 // read from a buffer to destination address using DMAE
3916 #define REG_RD_DMAE_LEN(_pdev,_reg_offset, _addr_dst, _len) REG_RD_DMAE_LEN_IMP(_pdev,_reg_offset, _addr_dst, _len)
3917 
3918 // write a zeroed buffer to destination address using DMAE
3919 #define REG_WR_DMAE_LEN_ZERO(_pdev,_reg_offset, _len) REG_WR_DMAE_LEN_IMP(_pdev,_reg_offset, pdev->vars.zero_buffer, TRUE, _len, FALSE)
3920 
3921 // Write to regiters, value of length 64 bit
3922 #define REG_WR_DMAE(_pdev,_reg_offset, _addr_src ) REG_WR_DMAE_LEN(_pdev,_reg_offset, _addr_src, 2)
3923 
3924 // Read from regiters, value of length 64 bit
3925 #define REG_RD_DMAE(_pdev,_reg_offset, _addr_dst ) REG_RD_DMAE_LEN(_pdev,_reg_offset, _addr_dst, 2)
3926 
3927 
3928 
3929 
3930 /* Indirect register access. */
3931 #define REG_RD_IND(_pdev, _reg_offset, _ret)    lm_reg_rd_ind(_pdev, (_reg_offset), _ret)
3932 #define REG_WR_IND(_pdev, _reg_offset, _val)    lm_reg_wr_ind(_pdev, (_reg_offset), _val)
3933 
3934 #ifndef __LINUX
3935 /* BAR write32 via register address */
3936 #define LM_BAR_WR32_ADDRESS(_pdev, _address, _val) \
3937     *((u32_t volatile *) (_address))=(_val); \
3938     mm_write_barrier()
3939 #else
3940 /* BAR write32 via register address */
3941 #define LM_BAR_WR32_ADDRESS(_pdev, _address, _val) \
3942     mm_io_write_dword(_pdev, _address, _val)
3943 #endif
3944 
3945 
3946 #if !(defined(UEFI) || defined(__SunOS) || defined(__LINUX)) || defined(__SunOS_MDB)
3947 
3948 #ifdef _VBD_CMD_
3949 void vbd_cmd_on_bar_access(lm_device_t* pdev, u8_t bar, u32_t offset);
3950 #define VBD_CMD_VERIFY_BAR_ACCESS(_pdev, _bar, _offset) vbd_cmd_on_bar_access(_pdev, _bar, _offset);
3951 #else
3952 #define VBD_CMD_VERIFY_BAR_ACCESS(_pdev, _bar, _offset)
3953 #endif
3954 
3955 
3956 /* BAR read8 via register offset and specific bar */
3957 #define LM_BAR_RD8_OFFSET(_pdev, _bar, _offset, _ret) \
3958     do { \
3959     mm_read_barrier(); \
3960     VBD_CMD_VERIFY_BAR_ACCESS(_pdev, _bar, _offset)\
3961         *(_ret) = *((u8_t volatile *) ((u8_t *) (_pdev)->vars.mapped_bar_addr[(_bar)] + (_offset))); \
3962     } while (0)
3963 /* BAR read16 via register offset and specific bar */
3964 #define LM_BAR_RD16_OFFSET(_pdev, _bar, _offset, _ret) \
3965     do { \
3966     mm_read_barrier(); \
3967     VBD_CMD_VERIFY_BAR_ACCESS(_pdev, _bar, _offset)\
3968         *(_ret) = *((u16_t volatile *) ((u8_t *) (_pdev)->vars.mapped_bar_addr[(_bar)]+(_offset))); \
3969     } while (0)
3970 
3971 /* BAR read32 via register offset and specific bar */
3972 #define LM_BAR_RD32_OFFSET(_pdev, _bar, _offset, _ret) \
3973     do { \
3974     mm_read_barrier(); \
3975     VBD_CMD_VERIFY_BAR_ACCESS(_pdev, _bar, _offset)\
3976         *(_ret) = *((u32_t volatile *) ((u8_t *) (_pdev)->vars.mapped_bar_addr[(_bar)]+(_offset))); \
3977     } while (0)
3978 
3979 /* BAR read64 via register offset and specific bar */
3980 #define LM_BAR_RD64_OFFSET(_pdev, _bar, _offset, _ret) \
3981     do { \
3982     mm_read_barrier(); \
3983     VBD_CMD_VERIFY_BAR_ACCESS(_pdev, _bar, _offset)\
3984         *(_ret) = *((u64_t volatile *) ((u8_t *) (_pdev)->vars.mapped_bar_addr[(_bar)]+(_offset))); \
3985     } while (0)
3986 
3987 /* BAR write8 via register offset and specific bar */
3988 #define LM_BAR_WR8_OFFSET(_pdev, _bar, _offset, _val) \
3989     do { \
3990     VBD_CMD_VERIFY_BAR_ACCESS(_pdev, _bar, _offset)\
3991     *((u8_t volatile *) ((u8_t *) (_pdev)->vars.mapped_bar_addr[(_bar)]+(_offset)))=(_val); \
3992         mm_write_barrier(); \
3993     } while (0)
3994 
3995 /* BAR write16 via register offset and specific bar */
3996 #define LM_BAR_WR16_OFFSET(_pdev, _bar, _offset, _val) \
3997     do { \
3998     VBD_CMD_VERIFY_BAR_ACCESS(_pdev, _bar, _offset)\
3999     *((u16_t volatile *) ((u8_t *) (_pdev)->vars.mapped_bar_addr[(_bar)]+(_offset)))=(_val); \
4000         mm_write_barrier(); \
4001     } while (0)
4002 
4003 /* BAR write32 via register offset and specific bar */
4004 #define LM_BAR_WR32_OFFSET(_pdev, _bar, _offset, _val) \
4005     do { \
4006     VBD_CMD_VERIFY_BAR_ACCESS(_pdev, _bar, _offset)\
4007     *((u32_t volatile *) ((u8_t *) (_pdev)->vars.mapped_bar_addr[(_bar)]+(_offset)))=(_val); \
4008         mm_write_barrier(); \
4009     } while (0)
4010 
4011 /* BAR write64 via register offset and specific bar */
4012 #define LM_BAR_WR64_OFFSET(_pdev, _bar, _offset, _val) \
4013     do { \
4014     VBD_CMD_VERIFY_BAR_ACCESS(_pdev, _bar, _offset)\
4015     *((u64_t volatile *) ((u8_t *) (_pdev)->vars.mapped_bar_addr[(_bar)]+(_offset)))=(_val); \
4016         mm_write_barrier(); \
4017     } while (0)
4018 
4019 /* BAR copy buffer to specific bar address */
4020 #define LM_BAR_COPY_BUFFER(_pdev, _bar, _offset, _size_, _buf_ptr) \
4021 do { \
4022     u32_t i; \
4023     for (i=0; i<size; i++) { \
4024         VBD_CMD_VERIFY_BAR_ACCESS(_pdev, _bar, (_offset+i*4) )\
4025          *((u32_t volatile *) ((u8_t *) (_pdev)->vars.mapped_bar_addr[(_bar)]+(_offset)+i*4))=*(buf_ptr+i); \
4026     } \
4027 } while (0)
4028 
4029 #else
4030 #define LM_BAR_RD8_OFFSET(_pdev, _bar, _offset, _ret) \
4031     mm_bar_read_byte(_pdev, _bar, _offset, _ret)
4032 #define LM_BAR_RD16_OFFSET(_pdev, _bar, _offset, _ret) \
4033     mm_bar_read_word(_pdev, _bar, _offset, _ret)
4034 #define LM_BAR_RD32_OFFSET(_pdev, _bar, _offset, _ret) \
4035     mm_bar_read_dword(_pdev, _bar, _offset, _ret)
4036 #define LM_BAR_RD64_OFFSET(_pdev, _bar, _offset, _ret) \
4037     mm_bar_read_ddword(_pdev, _bar, _offset, _ret)
4038 #define LM_BAR_WR8_OFFSET(_pdev, _bar, _offset, _val) \
4039     mm_bar_write_byte(_pdev, _bar, _offset, _val)
4040 #define LM_BAR_WR16_OFFSET(_pdev, _bar, _offset, _val) \
4041     mm_bar_write_word(_pdev, _bar, _offset, _val)
4042 #define LM_BAR_WR32_OFFSET(_pdev, _bar, _offset, _val) \
4043     mm_bar_write_dword(_pdev, _bar, _offset, _val)
4044 #define LM_BAR_WR64_OFFSET(_pdev, _bar, _offset, _val) \
4045     mm_bar_write_ddword(_pdev, _bar, _offset, _val)
4046 #define LM_BAR_COPY_BUFFER(_pdev, _bar, _offset, _size, _buf_ptr) \
4047     mm_bar_copy_buffer(_pdev, _bar, _offset, _size, _buf_ptr)
4048 #endif
4049 
4050 #ifndef USER_LINUX
4051 
4052 #if DBG && LOG_REG_ACCESS
4053 
4054 #define LOG_REG_RD(_pdev, _offset, _val)                                   \
4055     if((_pdev)->params.test_mode & TEST_MODE_LOG_REG_ACCESS)               \
4056     {                                                                      \
4057         DbgMessage(_pdev, INFORM, "rd 0x%04x = 0x%08x\n", _offset, _val); \
4058     }
4059 
4060 #define LOG_REG_WR(_pdev, _offset, _val)                                 \
4061     if((_pdev)->params.test_mode & TEST_MODE_LOG_REG_ACCESS)             \
4062     {                                                                    \
4063         DbgMessage(_pdev, INFORM, "wr 0x%04x 0x%08x\n", _offset, _val); \
4064     }
4065 
4066 #else
4067 
4068 #define LOG_REG_RD(_pdev, _offset, _val)
4069 #define LOG_REG_WR(_pdev, _offset, _val)
4070 
4071 #endif /* DBG */
4072 
4073 #endif /* USER_LINUX */
4074 
4075 #if defined(__SunOS)
4076 
4077 #ifdef __SunOS_MDB
4078 
4079 /* Solaris debugger (MDB) doesn't have access to ddi_get/put routines */
4080 
_reg_rd(struct _lm_device_t * pdev,u32_t reg_offset)4081 static __inline u32_t _reg_rd(struct _lm_device_t * pdev, u32_t reg_offset)
4082 {
4083     u32_t val;
4084     LM_BAR_RD32_OFFSET(pdev, BAR_0, reg_offset, &val);
4085     return val;
4086 }
4087 
4088 #define REG_RD(_pdev, _reg_offset) _reg_rd(_pdev, _reg_offset)
4089 #define VF_REG_RD(_pdev, _reg_offset) _reg_rd(_pdev, _reg_offset)
4090 
4091 #define REG_WR(_pdev, _reg_offset, _val)                     \
4092     do {                                                     \
4093         LOG_REG_WR(_pdev, (u32_t)(_reg_offset), _val);       \
4094         LM_BAR_WR32_OFFSET(_pdev, BAR_0, _reg_offset, _val); \
4095     } while (0)
4096 
4097 #define VF_REG_WR(_pdev, _reg_offset, _val) REG_WR(_pdev, _reg_offset, _val)
4098 
4099 #else /* __SunOS && !__SunOS_MDB */
4100 
4101 #define REG_RD(_pdev, _reg_offset)                                         \
4102     ddi_get32((_pdev)->vars.reg_handle[BAR_0],                             \
4103               (uint32_t *)((caddr_t)(_pdev)->vars.mapped_bar_addr[BAR_0] + \
4104                            (_reg_offset)))
4105 
4106 #define REG_WR(_pdev, _reg_offset, _val)                                    \
4107     ddi_put32((_pdev)->vars.reg_handle[BAR_0],                              \
4108                (uint32_t *)((caddr_t)(_pdev)->vars.mapped_bar_addr[BAR_0] + \
4109                             (_reg_offset)),                                 \
4110               (_val))                                                       \
4111 
4112 #define VF_REG_RD(_pdev, _reg_offset)                                      \
4113     ddi_get32((_pdev)->vars.reg_handle[BAR_0],                             \
4114               (uint32_t *)((caddr_t)(_pdev)->vars.mapped_bar_addr[BAR_0] + \
4115                            (_reg_offset)))
4116 
4117 #define VF_REG_WR(_pdev, _reg_offset, _val)                                 \
4118     ddi_put32((_pdev)->vars.reg_handle[BAR_0],                              \
4119                (uint32_t *)((caddr_t)(_pdev)->vars.mapped_bar_addr[BAR_0] + \
4120                             (_reg_offset)),                                 \
4121               (_val))
4122 
4123 #endif /* __SunOS_MDB */
4124 
4125 #elif defined (_VBD_CMD_)
4126 
4127 //we repeat this function's signature here because including everest_sim.h leads to a circular dependency.
4128 void vbd_cmd_on_reg_write(lm_device_t* pdev, u32_t offset);
4129 
_reg_rd(struct _lm_device_t * pdev,u32_t reg_offset)4130 static __inline u32_t _reg_rd(struct _lm_device_t * pdev, u32_t reg_offset)
4131 {
4132     u32_t val;
4133     DbgBreakIf(IS_VFDEV(pdev));
4134     LM_BAR_RD32_OFFSET(pdev, BAR_0, reg_offset, &val);
4135     LOG_REG_RD(pdev, (reg_offset), val);
4136     return val;
4137 }
4138 
4139 /* Register access via register name. Macro returns a value */
4140 #define REG_RD(_pdev, _reg_offset) _reg_rd(_pdev, _reg_offset)
4141 
_vf_reg_rd(struct _lm_device_t * pdev,u32_t reg_offset)4142 static __inline u32_t _vf_reg_rd(struct _lm_device_t * pdev, u32_t reg_offset)
4143 {
4144     u32_t val;
4145     LM_BAR_RD32_OFFSET(pdev, BAR_0, reg_offset, &val);
4146     LOG_REG_RD(pdev, (reg_offset), val);
4147     return val;
4148 }
4149 
4150 #define VF_REG_RD(_pdev, _reg_offset) _reg_rd(_pdev, _reg_offset)
4151 
4152 // Offset passed to LOG_REG_WR is now without the bar address!
4153 #define REG_WR(_pdev, _reg_offset, _val) \
4154     do {  \
4155         DbgBreakIf(IS_VFDEV(_pdev)); \
4156         LOG_REG_WR(_pdev, (u32_t)(_reg_offset), _val); \
4157         LM_BAR_WR32_OFFSET(_pdev, BAR_0, _reg_offset, _val); \
4158         vbd_cmd_on_reg_write(_pdev, _reg_offset);\
4159     } while (0)
4160 
4161 #define VF_REG_WR(_pdev, _reg_offset, _val) \
4162     do {  \
4163         LOG_REG_WR(_pdev, (u32_t)(_reg_offset), _val); \
4164         LM_BAR_WR32_OFFSET(_pdev, BAR_0, _reg_offset, _val); \
4165         vbd_cmd_on_reg_write(_pdev, _reg_offset);\
4166     } while (0)
4167 
4168 
4169 #elif !defined(USER_LINUX)
4170 
_reg_rd(struct _lm_device_t * pdev,u32_t reg_offset)4171 static __inline u32_t _reg_rd(struct _lm_device_t * pdev, u32_t reg_offset)
4172 {
4173     u32_t val;
4174     DbgBreakIf(IS_VFDEV(pdev));
4175     LM_BAR_RD32_OFFSET(pdev, BAR_0, reg_offset, &val);
4176     LOG_REG_RD(pdev, (reg_offset), val);
4177     return val;
4178 }
4179 
4180 /* Register access via register name. Macro returns a value */
4181 #define REG_RD(_pdev, _reg_offset) _reg_rd(_pdev, _reg_offset)
4182 
_vf_reg_rd(struct _lm_device_t * pdev,u32_t reg_offset)4183 static __inline u32_t _vf_reg_rd(struct _lm_device_t * pdev, u32_t reg_offset)
4184 {
4185     u32_t val;
4186     LM_BAR_RD32_OFFSET(pdev, BAR_0, reg_offset, &val);
4187     LOG_REG_RD(pdev, (reg_offset), val);
4188     return val;
4189 }
4190 
4191 #define VF_REG_RD(_pdev, _reg_offset) _reg_rd(_pdev, _reg_offset)
4192 
4193 // Offset passed to LOG_REG_WR is now without the bar address!
4194 #define REG_WR(_pdev, _reg_offset, _val) \
4195     do {  \
4196         DbgBreakIf(IS_VFDEV(_pdev)); \
4197         LOG_REG_WR(_pdev, (u32_t)(_reg_offset), _val); \
4198         LM_BAR_WR32_OFFSET(_pdev, BAR_0, _reg_offset, _val); \
4199     } while (0)
4200 
4201 #define VF_REG_WR(_pdev, _reg_offset, _val) \
4202     do {  \
4203         LOG_REG_WR(_pdev, (u32_t)(_reg_offset), _val); \
4204         LM_BAR_WR32_OFFSET(_pdev, BAR_0, _reg_offset, _val); \
4205     } while (0)
4206 
4207 #endif /* USER_LINUX */
4208 
4209 /* TBA: optionally add LOG_REG_WR as in Teton to write 8/16/32*/
4210 
4211 // special macros for reading from shared memory
4212 
4213 /* TBD - E1H: all shmen read/write operations currenly use FUNC_ID for offset calculatio. This may not be right! MCP TBD*/
4214 #define LM_SHMEM_READ_IMP(_pdev,_offset,_ret,_shmem_base_name) \
4215     LM_BAR_RD32_OFFSET((_pdev),BAR_0,(_pdev)->hw_info._shmem_base_name + _offset,(_ret));
4216 
4217 #define LM_SHMEM_READ(_pdev,_offset,_ret)  LM_SHMEM_READ_IMP(_pdev,_offset,_ret, shmem_base );
4218 #define LM_SHMEM2_READ(_pdev,_offset,_ret) LM_SHMEM_READ_IMP(_pdev,_offset,_ret, shmem_base2 );
4219 #define LM_MFCFG_READ(_pdev,_offset,_ret) LM_SHMEM_READ_IMP(_pdev,_offset,_ret, mf_cfg_base );
4220 
4221 #define LM_SHMEM_WRITE_IMP(_pdev,_offset,_val,_shmem_base_name) \
4222     LM_BAR_WR32_OFFSET((_pdev),BAR_0,(_pdev)->hw_info._shmem_base_name + _offset,(_val));
4223 
4224 #define LM_SHMEM_WRITE(_pdev,_offset,_val)  LM_SHMEM_WRITE_IMP(_pdev,_offset,_val,shmem_base);
4225 #define LM_SHMEM2_WRITE(_pdev,_offset,_val) LM_SHMEM_WRITE_IMP(_pdev,_offset,_val,shmem_base2);
4226 #define LM_MFCFG_WRITE(_pdev,_offset,_val) LM_SHMEM_WRITE_IMP(_pdev,_offset,_val,mf_cfg_base);
4227 
4228 #define LM_SHMEM2_ADDR(_pdev, field) (_pdev->hw_info.shmem_base2 + OFFSETOF(struct shmem2_region, field))
4229 #define LM_SHMEM2_HAS(_pdev, field)  ((_pdev)->hw_info.shmem_base2 && \
4230                                       (REG_RD(_pdev, LM_SHMEM2_ADDR(_pdev, size)) > OFFSETOF(struct shmem2_region, field)))
4231 
4232 
4233 /* Macros for read/write to internal memory of storms */
4234 #define LM_INTMEM_READ8(_pdev,_offset,_ret,_type) \
4235     DbgMessage(pdev, INFORMi, "LM_INTMEM_READ8() inside! storm:%s address:0x%x\n",#_type,_type); \
4236     LM_BAR_RD8_OFFSET((_pdev),BAR_0,((_type)+(_offset)),(_ret));
4237 
4238 #define LM_INTMEM_WRITE8(_pdev,_offset,_val,_type) \
4239     DbgMessage(pdev, INFORMi, "LM_INTMEM_WRITE8() inside! storm:%s address:0x%x\n",#_type,_type); \
4240     LM_BAR_WR8_OFFSET((_pdev),BAR_0,((_type)+(_offset)),(_val));
4241 
4242 #define LM_INTMEM_READ16(_pdev,_offset,_ret,_type) \
4243     DbgMessage(pdev, INFORMi, "LM_INTMEM_READ16() inside! storm:%s address:0x%x\n",#_type,_type); \
4244     LM_BAR_RD16_OFFSET((_pdev),BAR_0,((_type)+(_offset)),(_ret));
4245 
4246 #define LM_INTMEM_WRITE16(_pdev,_offset,_val,_type) \
4247     DbgMessage(pdev, INFORMi, "LM_INTMEM_WRITE16() inside! storm:%s address:0x%x offset=%x val=%x\n",#_type,_type, _offset, _val); \
4248     LM_BAR_WR16_OFFSET((_pdev),BAR_0,((_type)+(_offset)),(_val));
4249 
4250 #define LM_INTMEM_READ32(_pdev,_offset,_ret,_type) \
4251     DbgMessage(pdev, INFORMi, "LM_INTMEM_READ32() inside! storm:%s address:0x%x\n",#_type,_type); \
4252     LM_BAR_RD32_OFFSET((_pdev),BAR_0,((_type)+(_offset)),(_ret));
4253 
4254 #define LM_INTMEM_WRITE32(_pdev,_offset,_val,_type) \
4255     DbgMessage(pdev, INFORMi, "LM_INTMEM_WRITE32() inside! storm:%s address:0x%x\n",#_type,_type); \
4256     LM_BAR_WR32_OFFSET((_pdev),BAR_0,((_type)+(_offset)),(_val));
4257 
4258 #define LM_INTMEM_READ64(_pdev,_offset,_ret,_type) \
4259     DbgMessage(pdev, INFORMi, "LM_INTMEM_READ64() inside! storm:%s address:0x%x\n",#_type,_type); \
4260     LM_BAR_RD64_OFFSET((_pdev),BAR_0,((_type)+(_offset)),(_ret));
4261 
4262 #define LM_INTMEM_WRITE64(_pdev,_offset,_val,_type) \
4263     DbgMessage(pdev, INFORMi, "LM_INTMEM_WRITE64() inside! storm:%s address:0x%x\n",#_type,_type); \
4264     LM_BAR_WR64_OFFSET((_pdev),BAR_0,((_type)+(_offset)),(_val));
4265 //________________________________________________________________________________
4266 
4267 
4268 #define DEFAULT_WAIT_INTERVAL_MICSEC 30 // wait interval microseconds
4269 
4270 u32_t reg_wait_verify_val(struct _lm_device_t * pdev, u32_t reg_offset, u32_t excpected_val, u32_t total_wait_time_ms );
4271 #if !defined(_VBD_CMD_)
4272 #define REG_WAIT_VERIFY_VAL(_pdev, _reg_offset, _excpected_val, _total_wait_time_ms ) \
4273     reg_wait_verify_val(_pdev, _reg_offset, _excpected_val, _total_wait_time_ms );
4274 #else
4275 /* For VBD_CMD: we don't verify values written... */
4276 #define REG_WAIT_VERIFY_VAL(_pdev, _reg_offset, _excpected_val, _total_wait_time_ms ) 0
4277 #endif
4278 
4279 #define DPM_TRIGER_TYPE 0x40
4280 
4281 #if defined(EMULATION_DOORBELL_FULL_WORKAROUND)
4282 #define _DOORBELL(PDEV,CID,VAL)  do{\
4283     MM_WRITE_DOORBELL(PDEV,BAR_1,CID,VAL);\
4284     } while(0)
4285 
DOORBELL(lm_device_t * pdev,u32_t cid,u32_t val)4286 static __inline void DOORBELL(lm_device_t *pdev, u32_t cid, u32_t val)
4287 {
4288     u32_t db_fill;
4289     u32_t wait_cnt = 0;
4290 
4291     if (CHIP_REV_IS_EMUL(pdev) || CHIP_REV_IS_FPGA(pdev)) {
4292         lm_device_t *pf_dev = pdev->pf_dev;
4293         if (!pf_dev) {
4294             pf_dev = pdev;
4295         }
4296         /* wait while doorbells are blocked */
4297         while(pdev->vars.doorbells_blocked) {
4298             wait_cnt++; /* counter required to avoid Watcom warning */
4299         }
4300 
4301         if(mm_atomic_dec(&pdev->vars.doorbells_cnt) == 0) {
4302 
4303             mm_atomic_set(&pdev->vars.doorbells_cnt, DOORBELL_CHECK_FREQUENCY);
4304 
4305             db_fill=REG_RD(pf_dev,DORQ_REG_DQ_FILL_LVLF);
4306 
4307             if (db_fill > ALLOWED_DOORBELLS_HIGH_WM) {
4308 
4309                 DbgMessage(pdev, WARN,
4310                             "EMULATION_DOORBELL_FULL_WORKAROUND: db_fill=%d, doorbell in busy wait!\n",
4311                             db_fill);
4312 
4313                 /* block additional doorbells */
4314                 pdev->vars.doorbells_blocked = 1;
4315 
4316                 /* busy wait for doorbell capacity */
4317 
4318                 do {
4319                     db_fill=REG_RD(pf_dev,DORQ_REG_DQ_FILL_LVLF);
4320                     if (db_fill == 0xffffffff) {
4321                         DbgMessage(pdev, FATAL, "DOORBELL: fill level 0xffffffff\n");
4322                         break;
4323                     }
4324                 } while (db_fill  > ALLOWED_DOORBELLS_LOW_WM);
4325 
4326                 /* incr statistics */
4327                 pdev->vars.doorbells_high_wm_reached++;
4328 
4329                 /* unblock additional doorbells */
4330                 pdev->vars.doorbells_blocked = 0;
4331             }
4332         }
4333     }
4334 
4335     _DOORBELL(pdev,cid,val);
4336 }
4337 
4338 #else
4339 
4340 // need to change LM_PAGE_SIZE to OS page size + when we will have 2 bars BAR_DOORBELL_OFFSET is not needed.
4341 #define DOORBELL(PDEV,CID,VAL)  do{\
4342     MM_WRITE_DOORBELL(PDEV,BAR_1,CID,VAL);\
4343     } while(0)
4344 
4345 #endif /* defined(EMULATION_DOORBELL_FULL_WORKAROUND) */
4346 
4347 
4348 #define HW_CID(pdev,x) (x |(PORT_ID(pdev) << 23 | VNIC_ID(pdev) << 17))
4349 // used on a CID received from the HW - ignore bits 17, 18 and 23 (though 19-22 can be ignored as well)
4350 #define SW_CID(x)    (x & COMMON_RAMROD_ETH_RX_CQE_CID & ~0x860000)
4351 
4352 
4353 u64_t lm_get_timestamp_of_recent_cid_recycling(struct _lm_device_t *pdev);
4354 
lm_sb_id_from_chain(struct _lm_device_t * pdev,u32_t chain_idx)4355 static u8_t __inline lm_sb_id_from_chain(struct _lm_device_t *pdev, u32_t chain_idx)
4356 {
4357     u8_t sb_id = 0 ;
4358 
4359     if (CHAIN_TO_RSS_ID(pdev,(u32_t)chain_idx) >= LM_SB_CNT(pdev)) //LM_MAX_RSS_CHAINS(pdev))
4360         {
4361             /* mapping iscsi / fcoe cids to the default status block */
4362             sb_id = DEF_STATUS_BLOCK_INDEX;
4363         }
4364     else
4365     {
4366         sb_id = (u8_t)RSS_ID_TO_SB_ID(CHAIN_TO_RSS_ID(pdev,(u32_t)chain_idx));
4367     }
4368     return sb_id;
4369 }
lm_set_virt_mode(struct _lm_device_t * pdev,u8_t device_type,u8_t virtualization_type)4370 static void __inline lm_set_virt_mode(struct _lm_device_t *pdev, u8_t device_type, u8_t virtualization_type)
4371 {
4372     if (CHK_NULL(pdev))
4373     {
4374         DbgBreakMsg("lm_set_virt_mode pdev is null");
4375         return;
4376     }
4377 
4378     if ((pdev->params.device_type == DEVICE_TYPE_PF) && (pdev->params.virtualization_type == VT_NONE)) {
4379         switch (device_type) {
4380         case DEVICE_TYPE_PF:
4381             pdev->params.device_type = device_type;
4382             switch (virtualization_type) {
4383             case VT_NONE:
4384                 break;
4385             case VT_BASIC_VF:
4386             case VT_CHANNEL_VF:
4387             case VT_ASSIGNED_TO_VM_PF:
4388                 pdev->params.virtualization_type = virtualization_type;
4389                 break;
4390             default:
4391                 DbgMessage(pdev, FATAL, "Master PF mode %d is not supported in virt.mode\n",virtualization_type);
4392                 DbgBreak();
4393                 break;
4394             }
4395             break;
4396         case DEVICE_TYPE_VF:
4397             pdev->params.device_type = device_type;
4398             switch (virtualization_type) {
4399             case VT_BASIC_VF:
4400             case VT_CHANNEL_VF:
4401                 pdev->params.virtualization_type = virtualization_type;
4402                 break;
4403             case VT_NONE:
4404                 DbgMessage(pdev, FATAL, "VF mode is mandatory parameter\n");
4405                 DbgBreak();
4406                 break;
4407             default:
4408                 DbgMessage(pdev, FATAL, "VF mode %d is not supported\n",virtualization_type);
4409                 DbgBreak();
4410                 break;
4411             }
4412             break;
4413         default:
4414             DbgMessage(pdev, FATAL, "Device type %d is not supported in virt.mode\n",device_type);
4415             DbgBreak();
4416         }
4417     } else {
4418         DbgMessage(pdev, FATAL, "Virt.mode is set already (%d,%d)\n",device_type,virtualization_type);
4419     }
4420     DbgMessage(pdev, WARN, "Virt.mode is set as (%d,%d)\n", pdev->params.device_type, pdev->params.virtualization_type);
4421 }
4422 
lm_set_virt_channel_type(struct _lm_device_t * pdev,u8_t channel_type)4423 static void __inline lm_set_virt_channel_type(struct _lm_device_t *pdev, u8_t channel_type)
4424 {
4425     if (CHK_NULL(pdev))
4426     {
4427         DbgBreakMsg("lm_set_virt_channel_type pdev is null");
4428         return;
4429     }
4430     switch (channel_type) {
4431     case VT_HW_CHANNEL_TYPE:
4432     case VT_SW_CHANNEL_TYPE:
4433         break;
4434     default:
4435         DbgMessage(pdev, WARN, "Unknown channel type (%d)\n", channel_type);
4436         DbgBreak();
4437         channel_type = VT_HW_CHANNEL_TYPE;
4438     }
4439     pdev->params.channel_type = channel_type;
4440     DbgMessage(pdev, WARN, "Channel type is set as (%d)\n", pdev->params.channel_type);
4441 }
4442 
lm_reset_virt_mode(struct _lm_device_t * pdev)4443 static void __inline lm_reset_virt_mode(struct _lm_device_t *pdev)
4444 {
4445     if (CHK_NULL(pdev))
4446     {
4447         DbgBreakMsg("lm_reset_virt_mode pdev is null");
4448         return;
4449     }
4450     if (pdev->params.device_type == DEVICE_TYPE_PF) {
4451         pdev->params.device_type = DEVICE_TYPE_PF;
4452         pdev->params.virtualization_type = VT_NONE;
4453         DbgMessage(pdev, FATAL, "Vrtualization mode is reset to simple PF\n");
4454     } else {
4455         DbgMessage(pdev, FATAL, "Virtualization mode reset is is valid only for PF\n");
4456     }
4457 }
4458 
4459 u32_t lm_get_num_of_cashed_grq_bds(struct _lm_device_t *pdev);
4460 void lm_set_waitp(lm_device_t *pdev);
4461 u8_t lm_get_port_id_from_func_abs( const u32_t chip_num,  const lm_chip_port_mode_t lm_chip_port_mode, const u8_t abs_func );
4462 u8_t lm_get_abs_func_vector( const u32_t chip_num,  const lm_chip_port_mode_t chip_port_mode, const u8_t b_multi_vnics_mode, const u8_t path_id );
4463 u8_t lm_check_if_pf_assigned_to_vm(struct _lm_device_t *pdev);
4464 u8_t lm_is_fw_version_valid(struct _lm_device_t *pdev);
4465 lm_status_t lm_set_cli_drv_ver_to_shmem(struct _lm_device_t *lmdev);
4466 
4467 #ifdef VF_INVOLVED
4468 lm_vf_info_t * lm_pf_find_vf_info_by_rel_id(struct _lm_device_t *pdev, u16_t relative_vf_id);
4469 lm_vf_info_t * lm_pf_find_vf_info_by_abs_id(struct _lm_device_t *pdev, u8_t abs_vf_id);
4470 lm_status_t lm_pf_download_standard_request(struct _lm_device_t *pdev, lm_vf_info_t *vf_info, void* virt_buffer, u32_t length);
4471 lm_status_t lm_pf_upload_standard_response(struct _lm_device_t *pdev, lm_vf_info_t *vf_info, void* virt_buffer, u32_t length);
4472 
4473 lm_status_t lm_pf_upload_standard_request(struct _lm_device_t *pdev, lm_vf_info_t *vf_info, lm_address_t * phys_buffer, u32_t length);
4474 lm_status_t lm_pf_download_standard_response(struct _lm_device_t *pdev, lm_vf_info_t *vf_info, lm_address_t * phys_buffer, u32_t length);
4475 lm_status_t lm_pf_allocate_vfs(struct _lm_device_t *pdev);
4476 lm_status_t lm_pf_init_vfs(struct _lm_device_t *pdev, u16_t num_vfs);
4477 lm_status_t lm_pf_clear_vfs(struct _lm_device_t * pdev);
4478 lm_status_t lm_pf_set_vf_ctx(struct _lm_device_t *pdev, u16_t vf_id, void* ctx);
4479 #if 0
4480 lm_status_t lm_pf_set_vf_client_id(struct _lm_device_t *pdev,
4481                                    u16_t vf_id,
4482                                    u8_t base_fw_client_id,
4483                                    u8_t base_sw_client_id);
4484 lm_status_t lm_pf_set_vf_ndsb(struct _lm_device_t *pdev,
4485                                    u16_t vf_id,
4486                                    u8_t base_fw_ndsb,
4487                                    u8_t base_sw_ndsb,
4488                                    u8_t base_fw_dhc_qzone_id);
4489 lm_status_t lm_pf_set_vf_qzone_id(struct _lm_device_t *pdev,
4490                                    u16_t vf_id,
4491                                    u8_t base_fw_qzone_id);
4492 #endif
4493 
4494 lm_status_t lm_pf_set_vf_stat_id(struct _lm_device_t *pdev,
4495                                    u16_t vf_id,
4496                                    u8_t base_fw_stats_id);
4497 
4498 u8_t lm_pf_is_vf_mac_set(struct _lm_device_t *pdev, u16_t vf_id);
4499 
4500 lm_status_t lm_pf_set_vf_base_cam_idx(struct _lm_device_t *pdev, u16_t vf_id, u32_t base_cam_idx);
4501 
4502 u32_t lm_pf_get_sw_client_idx_from_cid(struct _lm_device_t *pdev, u32_t cid);
4503 u32_t lm_pf_get_fw_client_idx_from_cid(struct _lm_device_t *pdev, u32_t cid);
4504 
4505 u8_t lm_pf_acquire_vf_chains_resources(struct _lm_device_t *pdev, u16_t vf_id, u32_t num_chains);
4506 void lm_pf_release_vf_chains_resources(struct _lm_device_t *pdev, u16_t vf_id);
4507 void lm_pf_release_separate_vf_chain_resources(struct _lm_device_t *pdev, u16_t vf_id, u8_t chain_num);
4508 u8_t lm_pf_is_sriov_valid(struct _lm_device_t *pdev);
4509 u8_t lm_pf_allocate_vf_igu_sbs(struct _lm_device_t *pdev, struct _lm_vf_info_t *vf_info, u8_t num_of_igu_sbs);
4510 void lm_pf_release_vf_igu_sbs(struct _lm_device_t *pdev, struct _lm_vf_info_t *vf_info);
4511 u8_t lm_pf_get_max_number_of_vf_igu_sbs(struct _lm_device_t *pdev);
4512 u8_t lm_pf_get_next_free_igu_block_id(struct _lm_device_t *pdev, u8_t starting_from);
4513 void lm_pf_clear_vf_igu_blocks(struct _lm_device_t *pdev);
4514 u8_t lm_pf_release_vf_igu_block(struct _lm_device_t *pdev, u8_t igu_sb_idx);
4515 u8_t lm_pf_acquire_vf_igu_block(struct _lm_device_t *pdev, u8_t igu_sb_idx, u8_t abs_vf_id, u8_t vector_number);
4516 u8_t lm_pf_get_vf_available_igu_blocks(struct _lm_device_t *pdev);
4517 lm_status_t lm_pf_update_vf_default_vlan(IN struct _lm_device_t    *pdev, IN struct _lm_vf_info_t * vf_info,
4518                               IN const u16_t            silent_vlan_value,
4519                               IN const u16_t            silent_vlan_mask,
4520                               IN const u8_t             silent_vlan_removal_flg,
4521                               IN const u8_t             silent_vlan_change_flg,
4522                               IN const u16_t            default_vlan,
4523                               IN const u8_t             default_vlan_enable_flg,
4524                               IN const u8_t             default_vlan_change_flg);
4525 
4526 lm_status_t lm_pf_update_vf_ndsb(IN struct _lm_device_t     *pdev,
4527                                   IN struct _lm_vf_info_t   *vf_info,
4528                                   IN u8_t                   relative_in_vf_ndsb,
4529                                   IN u16_t                  interrupt_mod_level);
4530 
4531 lm_status_t lm_pf_update_vf_ndsbs(IN struct _lm_device_t    *pdev,
4532                                   IN struct _lm_vf_info_t   *vf_info,
4533                                   IN u16_t                  interrupt_mod_level);
4534 
4535 #endif
4536 
4537 #endif /* _LM5710_H */
4538