xref: /illumos-gate/usr/src/uts/common/io/bnx/570x/common/include/54xx_reg.h (revision eef4f27b270242808b43b4b23bd161df52839361)
1 /*
2  * Copyright 2014-2017 Cavium, Inc.
3  * The contents of this file are subject to the terms of the Common Development
4  * and Distribution License, v.1,  (the "License").
5  *
6  * You may not use this file except in compliance with the License.
7  *
8  * You can obtain a copy of the License at available
9  * at http://opensource.org/licenses/CDDL-1.0
10  *
11  * See the License for the specific language governing permissions and
12  * limitations under the License.
13  */
14 
15 #ifndef _54xx_reg_h
16 #define _54xx_reg_h
17 
18 #include "bits.h"
19 
20 
21 
22 /* Control register. */
23 #define PHY_CTRL_REG                                0x00
24 #define PHY_CTRL_SPEED_MASK                         (BIT_6 | BIT_13)
25 #define PHY_CTRL_SPEED_SELECT_10MBPS                BIT_NONE
26 #define PHY_CTRL_SPEED_SELECT_100MBPS               BIT_13
27 #define PHY_CTRL_SPEED_SELECT_1000MBPS              BIT_6
28 #define PHY_CTRL_COLLISION_TEST_ENABLE              BIT_7
29 #define PHY_CTRL_FULL_DUPLEX_MODE                   BIT_8
30 #define PHY_CTRL_RESTART_AUTO_NEG                   BIT_9
31 #define PHY_CTRL_ISOLATE_PHY                        BIT_10
32 #define PHY_CTRL_LOWER_POWER_MODE                   BIT_11
33 #define PHY_CTRL_AUTO_NEG_ENABLE                    BIT_12
34 #define PHY_CTRL_LOOPBACK_MODE                      BIT_14
35 #define PHY_CTRL_PHY_RESET                          BIT_15
36 
37 
38 /* Status register. */
39 #define PHY_STATUS_REG                              0x01
40 #define PHY_STATUS_LINK_PASS                        BIT_2
41 #define PHY_STATUS_AUTO_NEG_COMPLETE                BIT_5
42 
43 
44 /* Phy Id registers. */
45 #define PHY_ID1_REG                                 0x02
46 #define PHY_ID2_REG                                 0x03
47 
48 /* PHY_ID1: bits 31-16; PHY_ID2: bits 15-0.  */
49 #define PHY_BCM5400_PHY_ID                          0x00206040
50 #define PHY_BCM5401_PHY_ID                          0x00206050
51 #define PHY_BCM5411_PHY_ID                          0x00206070
52 #define PHY_BCM5701_PHY_ID                          0x00206110
53 #define PHY_BCM5703_PHY_ID                          0x00206160
54 #define PHY_BCM5706_PHY_ID                          0x00206160
55 
56 #define PHY_ID(id)                                  ((id) & 0xfffffff0)
57 #define PHY_REV_ID(id)                              ((id) & 0xf)
58 #define PHY_BCM5401_B0_REV                          0x1
59 #define PHY_BCM5401_B2_REV                          0x3
60 #define PHY_BCM5401_C0_REV                          0x6
61 
62 
63 /* Auto-negotiation advertisement register. */
64 #define PHY_AN_AD_REG                               0x04
65 #define PHY_AN_AD_10BASET_HALF                      BIT_5
66 #define PHY_AN_AD_10BASET_FULL                      BIT_6
67 #define PHY_AN_AD_100BASETX_HALF                    BIT_7
68 #define PHY_AN_AD_100BASETX_FULL                    BIT_8
69 #define PHY_AN_AD_PAUSE_CAPABLE                     BIT_10
70 #define PHY_AN_AD_ASYM_PAUSE                        BIT_11
71 #define PHY_AN_AD_PROTOCOL_802_3_CSMA_CD            0x01
72 
73 
74 /* Apply to 1000-X fiber mode only */
75 #define PHY_AN_AD_1000X_FULL_DUPLEX                 BIT_5
76 #define PHY_AN_AD_1000X_HALF_DUPLEX                 BIT_6
77 #define PHY_AN_AD_1000X_PAUSE_CAPABLE               BIT_7
78 #define PHY_AN_AD_1000X_ASYM_PAUSE                  BIT_8
79 #define PHY_AN_AD_1000X_REMOTE_FAULT_LINK_FAILURE   BIT_12
80 #define PHY_AN_AD_1000X_REMOTE_FAULT_OFFLINE        BIT_13
81 #define PHY_AN_AD_1000X_REMOTE_FAULT_AUTONEG_ERR    (BIT_12 | BIT_13)
82 
83 /* Auto-negotiation Link Partner Ability register. */
84 #define PHY_LINK_PARTNER_ABILITY_REG                0x05
85 #define PHY_LINK_PARTNER_10BASET_HALF               BIT_5
86 #define PHY_LINK_PARTNER_10BASET_FULL               BIT_6
87 #define PHY_LINK_PARTNER_100BASETX_HALF             BIT_7
88 #define PHY_LINK_PARTNER_100BASETX_FULL             BIT_8
89 #define PHY_LINK_PARTNER_PAUSE_CAPABLE              BIT_10
90 #define PHY_LINK_PARTNER_ASYM_PAUSE                 BIT_11
91 
92 
93 /* Auto-negotiation expansion register. */
94 #define PHY_AN_EXPANSION_REG                        0x06
95 #define PHY_LINK_PARTNER_AUTONEG_ABILITY            BIT_0
96 
97 
98 /* 1000Base-T control/advertisement register. */
99 #define PHY_1000BASET_CTRL_REG                      0x09
100 #define PHY_AN_AD_1000BASET_HALF                    BIT_8
101 #define PHY_AN_AD_1000BASET_FULL                    BIT_9
102 #define PHY_CONFIG_AS_MASTER                        BIT_11
103 #define PHY_ENABLE_CONFIG_AS_MASTER                 BIT_12
104 
105 
106 /* 1000Base-T status/link partner advertisement. */
107 #define PHY_1000BASET_STATUS_REG                    0x0a
108 #define PHY_LINK_PARTNER_1000BASET_HALF             BIT_10
109 #define PHY_LINK_PARTNER_1000BASET_FULL             BIT_11
110 
111 
112 /* Extended control register. */
113 #define BCM540X_EXT_CTRL_REG                        0x10
114 
115 #define BCM540X_EXT_CTRL_LINK3_LED_MODE             BIT_1
116 #define BCM540X_EXT_CTRL_TBI                        BIT_15
117 
118 
119 /* DSP Coefficient Read/Write Port. */
120 #define BCM540X_DSP_RW_PORT                         0x15
121 
122 
123 /* DSP Coeficient Address Register. */
124 #define BCM540X_DSP_ADDRESS_REG                     0x17
125 
126 #define BCM540X_DSP_TAP_NUMBER_MASK                 0x00
127 #define BCM540X_DSP_AGC_A                           0x00
128 #define BCM540X_DSP_AGC_B                           0x01
129 #define BCM540X_DSP_MSE_PAIR_STATUS                 0x02
130 #define BCM540X_DSP_SOFT_DECISION                   0x03
131 #define BCM540X_DSP_PHASE_REG                       0x04
132 #define BCM540X_DSP_SKEW                            0x05
133 #define BCM540X_DSP_POWER_SAVER_UPPER_BOUND         0x06
134 #define BCM540X_DSP_POWER_SAVER_LOWER_BOUND         0x07
135 #define BCM540X_DSP_LAST_ECHO                       0x08
136 #define BCM540X_DSP_FREQUENCY                       0x09
137 #define BCM540X_DSP_PLL_BANDWIDTH                   0x0a
138 #define BCM540X_DSP_PLL_PHASE_OFFSET                0x0b
139 
140 #define BCM540X_DSP_FILTER_DCOFFSET                 (BIT_10 | BIT_11)
141 #define BCM540X_DSP_FILTER_FEXT3                    (BIT_8 | BIT_9 | BIT_11)
142 #define BCM540X_DSP_FILTER_FEXT2                    (BIT_9 | BIT_11)
143 #define BCM540X_DSP_FILTER_FEXT1                    (BIT_8 | BIT_11)
144 #define BCM540X_DSP_FILTER_FEXT0                    BIT_11
145 #define BCM540X_DSP_FILTER_NEXT3                    (BIT_8 | BIT_9 | BIT_10)
146 #define BCM540X_DSP_FILTER_NEXT2                    (BIT_9 | BIT_10)
147 #define BCM540X_DSP_FILTER_NEXT1                    (BIT_8 | BIT_10)
148 #define BCM540X_DSP_FILTER_NEXT0                    BIT_10
149 #define BCM540X_DSP_FILTER_ECHO                     (BIT_8 | BIT_9)
150 #define BCM540X_DSP_FILTER_DFE                      BIT_9
151 #define BCM540X_DSP_FILTER_FFE                      BIT_8
152 
153 #define BCM540X_DSP_CONTROL_ALL_FILTERS             BIT_12
154 
155 #define BCM540X_DSP_SEL_CH_0                        BIT_NONE
156 #define BCM540X_DSP_SEL_CH_1                        BIT_13
157 #define BCM540X_DSP_SEL_CH_2                        BIT_14
158 #define BCM540X_DSP_SEL_CH_3                        (BIT_13 | BIT_14)
159 
160 #define BCM540X_CONTROL_ALL_CHANNELS                BIT_15
161 
162 
163 /* Auxilliary Control Register (Shadow Register) */
164 #define BCM5401_AUX_CTRL                            0x18
165 
166 #define BCM5401_SHADOW_SEL_MASK                     0x7
167 #define BCM5401_SHADOW_SEL_NORMAL                   0x00
168 #define BCM5401_SHADOW_SEL_10BASET                  0x01
169 #define BCM5401_SHADOW_SEL_POWER_CONTROL            0x02
170 #define BCM5401_SHADOW_SEL_IP_PHONE                 0x03
171 #define BCM5401_SHADOW_SEL_MISC_TEST1               0x04
172 #define BCM5401_SHADOW_SEL_MISC_TEST2               0x05
173 #define BCM5401_SHADOW_SEL_IP_PHONE_SEED            0x06
174 
175 
176 /* Shadow register selector == '000' */
177 #define BCM5401_SHDW_NORMAL_DIAG_MODE               BIT_3
178 #define BCM5401_SHDW_NORMAL_DISABLE_MBP             BIT_4
179 #define BCM5401_SHDW_NORMAL_DISABLE_LOW_PWR         BIT_5
180 #define BCM5401_SHDW_NORMAL_DISABLE_INV_PRF         BIT_6
181 #define BCM5401_SHDW_NORMAL_DISABLE_PRF             BIT_7
182 #define BCM5401_SHDW_NORMAL_RX_SLICING_NORMAL       BIT_NONE
183 #define BCM5401_SHDW_NORMAL_RX_SLICING_4D           BIT_8
184 #define BCM5401_SHDW_NORMAL_RX_SLICING_3LVL_1D      BIT_9
185 #define BCM5401_SHDW_NORMAL_RX_SLICING_5LVL_1D      (BIT_8 | BIT_9)
186 #define BCM5401_SHDW_NORMAL_TX_6DB_CODING           BIT_10
187 #define BCM5401_SHDW_NORMAL_ENABLE_SM_DSP_CLOCK     BIT_11
188 #define BCM5401_SHDW_NORMAL_EDGERATE_CTRL_4NS       BIT_NONE
189 #define BCM5401_SHDW_NORMAL_EDGERATE_CTRL_5NS       BIT_12
190 #define BCM5401_SHDW_NORMAL_EDGERATE_CTRL_3NS       BIT_13
191 #define BCM5401_SHDW_NORMAL_EDGERATE_CTRL_0NS       (BIT_12 | BIT_13)
192 #define BCM5401_SHDW_NORMAL_EXT_PACKET_LENGTH       BIT_14
193 #define BCM5401_SHDW_NORMAL_EXTERNAL_LOOPBACK       BIT_15
194 
195 
196 /* Auxilliary status summary. */
197 #define BCM540X_AUX_STATUS_REG                      0x19
198 
199 #define BCM540X_AUX_LINK_PASS                       BIT_2
200 #define BCM540X_AUX_SPEED_MASK                      (BIT_8 | BIT_9 | BIT_10)
201 #define BCM540X_AUX_10BASET_HD                      BIT_8
202 #define BCM540X_AUX_10BASET_FD                      BIT_9
203 #define BCM540X_AUX_100BASETX_HD                    (BIT_8 | BIT_9)
204 #define BCM540X_AUX_100BASET4                       BIT_10
205 #define BCM540X_AUX_100BASETX_FD                    (BIT_8 | BIT_10)
206 #define BCM540X_AUX_1000BASET_HD                    (BIT_9 | BIT_10)
207 #define BCM540X_AUX_1000BASET_FD                    (BIT_8 | BIT_9 | BIT_10)
208 
209 
210 /* Interrupt status. */
211 #define BCM540X_INT_STATUS_REG                      0x1a
212 
213 #define BCM540X_INT_LINK_CHNG                       BIT_1
214 #define BCM540X_INT_SPEED_CHNG                      BIT_2
215 #define BCM540X_INT_DUPLEX_CHNG                     BIT_3
216 #define BCM540X_INT_AUTO_NEG_PAGE_RX                BIT_10
217 
218 
219 /* Interrupt mask register. */
220 #define BCM540X_INT_MASK_REG                        0x1b
221 
222 
223 
224 #endif // _54xx_reg_h
225